Log in

Relevant bibliographies by topics / End surface / Dissertations / Theses

To see the other types of publications on this topic, follow the link: End surface.

Dissertations / Theses on the topic 'End surface'

Author: Grafiati

Published: 28 May 2022

Last updated: 18 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'End surface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Miao, X. "Turbine end-wall aerothermal management with engineered surface structure." Thesis, City, University of London, 2018. http://openaccess.city.ac.uk/20405/.

Full text

Abstract:

Motivated by the enlarged design space and additional flexibility offered by the latest advances in manufacturing techniques, especially Additive Manufacturing (AM), this thesis investigates a novel turbine end-wall aerothermal management method with the engineered surface structures, through closely coupled experi-mental and numerical studies. A 90-degree turning duct and a linear turbine cascade test section were employed for the experimental research in a low-speed wind tunnel. Duct and turbine end-wall heat transfer and cooling effectiveness were measured by transient Infrared Thermography

APA, Harvard, Vancouver, ISO, and other styles

2

Gillen, Daniel J. "Surface combatant planning since the end of the Cold War." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1998. http://handle.dtic.mil/100.2/ADA358799.

Full text

Abstract:

Thesis (M.S. in Management) Naval Postgraduate School, December 1998.<br>"December 1998." Thesis advisor(s): Richard B. Doyle, John E. Mutty. Includes bibliographical references (p. 153-161). Also available online.

APA, Harvard, Vancouver, ISO, and other styles

3

Zhang, Zimo. "Effect Of Chain End Functional And Chain Architecture On Surface Segregation." University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1498513871263316.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Fan Mr. "BRANCHING AND CHAIN END EFFECTS ON SURFACE FLUCTUATIONS OF POLYSTYRENE MELT FILMS." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1542541224707819.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Choi, Young Gu. "An integrated computer simulation system to evaluate surface integrity in end milling /." free to MU campus, to others for purchase, 1996. http://wwwlib.umi.com/cr/mo/fullcit?p9717175.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ahmed, Hamza Hafez Ahmed Anwar. "End-wall flow of a surface-mounted obstacle on a convex hump." Auburn, Ala., 2009. http://hdl.handle.net/10415/1946.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Melais, Sergio E. "A quasi Yagi antenna with end fire radiation over a metal ground." [Tampa, Fla] : University of South Florida, 2009. http://purl.fcla.edu/usf/dc/et/SFE0003246.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kulkarni, Nitin Madhukar 1957. "Modelling of end milling operation to predict the achievable surface finish and tolerance." Thesis, The University of Arizona, 1993. http://hdl.handle.net/10150/278323.

Full text

Abstract:

With increasing necessity to integrate CAD and CAM, it is necessary to develop more accurate models for predicting the performance of manufacturing processes. Conventionally, process parameters are selected by the process planner based on his experience. For CAD-CAM integration to be meaningful, it should be possible to arrive at the same decisions using computer models for that process. The end milling process is selected for such modeling. The parameters considered are process variables, cutter geometry, cutter material properties, workpiece material properties, workpiece geometry and locati

APA, Harvard, Vancouver, ISO, and other styles

9

Fisher, Caitlin. "Surface plasmon polariton excitation by end-fire coupling in a variety of plasmonic materials." Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/16045.

Full text

Abstract:

Surface plasmon polaritons are highly localised field oscillations that propagate along interfaces between a dielectric and a metal. Their localised fields make them potential signal carriers between integrated circuits, replacing electronic signals, to allow wider bandwidths and less power dissipation. End-fire coupling is a simple, compact method for exciting surface plasmon polaritons with potential for high coupling efficiency. However, the parameters that determine the mechanism's optimisation are not well understood. We present a semi-analytical model of the end-fire mechanism, in which

APA, Harvard, Vancouver, ISO, and other styles

10

Shauche, Vishwesh. "Health Assessment based In-process Surface Roughness Prediction System." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1298323430.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Walker, David A. "Directed self-assembly of gold nanorods using surface modification." [Tampa, Fla] : University of South Florida, 2008. http://purl.fcla.edu/usf/dc/et/SFE0002616.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Lim, Ee Meng. "The prediction of dimensional errors and machining planning for sculptured surface productions using ball-end milling /." The Ohio State University, 1995. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487862399449007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Tobiesen, Finn Andrew. "A method for grafting poly(acrylic acid) onto nylon 6,6 using amine end-groups on the nylon surface." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/29994.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Briend, Guillaume. "Développement d'un nouveau procédé de nettoyage chimique humide pour les surfaces front end des technologies CMOS (45 nm et au-delà) intégrant de nouveaux matériaux." Grenoble INPG, 2009. http://www.theses.fr/2009INPG0015.

Full text

Abstract:

La course à la miniaturisation en microélectronique impose aujourd’hui l’introduction de films métalliques et d’isolants de forte permittivité dans la fabrication des transistors MOS afin d’augmenter leurs performances électriques. Cependant, l’intégration de ces matériaux implique une remise en question totale des procédés de fabrication (dépôt, gravure, nettoyage, …). Ce travail de thèse se focalise plus particulièrement sur les étapes de nettoyage et de préparations de surface Front End autour de l’empilement de grille. Les challenges auxquels doivent faire face ces procédés sont résumés ic

APA, Harvard, Vancouver, ISO, and other styles

15

Herron, Christopher, and André Zachrisson. "Machine Learning Based Intraday Calibration of End of Day Implied Volatility Surfaces." Thesis, KTH, Matematisk statistik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-273419.

Full text

Abstract:

The implied volatility surface plays an important role for Front office and Risk Management functions at Nasdaq and other financial institutions which require mark-to-market of derivative books intraday in order to properly value their instruments and measure risk in trading activities. Based on the aforementioned business needs, being able to calibrate an end of day implied volatility surface based on new market information is a sought after trait. In this thesis a statistical learning approach is used to calibrate the implied volatility surface intraday. This is done by using OMXS30-2019 imp

APA, Harvard, Vancouver, ISO, and other styles

16

Cross, Lee W. "Design of Microwave Front-End Narrowband Filter and Limiter Components." Thesis, The University of Toledo, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=3588122.

Full text

Abstract:

<p> This dissertation proposes three novel bandpass filter structures to protect systems exposed to damaging levels of electromagnetic (EM) radiation from intentional and unintentional high-power microwave (HPM) sources. This is of interest because many commercial microwave communications and sensor systems are unprotected from high power levels. Novel technologies to harden front-end components must maintain existing system performance and cost. The proposed concepts all use low-cost printed circuit board (PCB) fabrication to create compact solutions that support high integration.</p><p> Th

APA, Harvard, Vancouver, ISO, and other styles

17

Bowens, Andrea Demetrius. "Synthesis and Characterization of Poly(siloxane imide) Block Copolymers and End-Functional Polyimides for Interphase Applications." Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/29985.

Full text

Abstract:

End-functional poly(ether amic acid)s and poly(siloxane imide) multiblock copolymers, comprised of 2,2'-Bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride (BPADA) / meta-phenylene diamine (MPDA) and hexafluoroisopropylidene-2-bis(phthalic acid anhydride) (6FDA) / meta-phenylene diamine (MPDA) polyimide segments, have been prepared and characterized to explore possibilities for controlling interface properties. Incorporation of polydimethylsiloxane (PDMS) components into polyimide backbone structures can yield advantageous properties such as low energy surfaces and low stress interfaces.

APA, Harvard, Vancouver, ISO, and other styles

18

Mendelson, Neil, Patrick Shipman, Darshan Roy, Liling Chen, and John Thwaites. "The dynamic behavior of bacterial macrofibers growing with one end prevented from rotating: variation in shaft rotation along the fiber's length, and supercoil movement on a solid surface toward the constrained end." BioMed Central, 2003. http://hdl.handle.net/10150/610048.

Full text

Abstract:

BACKGROUND:Bacterial macrofibers twist as they grow, writhe, supercoil and wind up into plectonemic structures (helical forms the individual filaments of which cannot be taken apart without unwinding) that eventually carry loops at both of their ends. Terminal loops rotate about the axis of a fiber's shaft in contrary directions at increasing rate as the shaft elongates. Theory suggests that rotation rates should vary linearly along the length of a fiber ranging from maxima at the loop ends to zero at an intermediate point. Blocking rotation at one end of a fiber should lead to a single gradie

APA, Harvard, Vancouver, ISO, and other styles

19

Guido, Zack, Jennifer C. McIntosh, Shirley A. Papuga, and Thomas Meixner. "Seasonal glacial meltwater contributions to surface water in the Bolivian Andes: A case study using environmental tracers." ELSEVIER SCIENCE BV, 2016. http://hdl.handle.net/10150/626096.

Full text

Abstract:

Study region: The Cordoriri watershed and vicinity in the Cordillera Real, Bolivia, South America Study focus: Recent warming has contributed to substantial reductions in glaciers in many regions around the globe. Melting of these glaciers alters the timing and magnitude of streamflows and diminishes water resources accumulated in past climates. These changes are especially acute in regions with small glaciers and problematic for populations relying on surface water. In Bolivia, most glaciers are less than 0.5 km(2) and about 2 million people draw water in part from glacier-fed watersheds. Spa

APA, Harvard, Vancouver, ISO, and other styles

20

Dhane, Kedar. "IN-SITU ELECTRO-CHEMICAL RESIDUE SENSOR AND PROCESS MODEL APPLICATION IN RINSING AND DRYING OF NANO-STRUCTURES." Diss., The University of Arizona, 2010. http://hdl.handle.net/10150/195656.

Full text

Abstract:

Typical surface preparation consists of exposure to cleaning chemical to remove contaminants followed by rinsing with ultra-pure water which is followed by drying. Large quantities of water, various chemicals, and energy are used during rinsing and drying processes. Currently there is no in-situ metrology available to determine the cleanliness of micro- and nano-structures as these processes are taking place. This is a major technology gap and leads to over use of resources and adversely affects the throughput.Surface preparation of patterned wafers by batch processing becomes a major chall

APA, Harvard, Vancouver, ISO, and other styles

21

Izquierdo, Christian. "Conception et réalisation d’un front-end analogique pour un récepteur multistandard multi-mode." Thesis, Lille 1, 2011. http://www.theses.fr/2011LIL10013/document.

Full text

Abstract:

L‘objectif de la thèse est la conception d’un front-end analogique RF large bande pour récepteurs cellulaires multistandard multi-mode. La principale limitation des récepteurs actuels par rapport à cet objectif est la nécessité d’un filtre SAW externe afin de protéger le LNA et le mélangeur des bloqueurs hors bande. Nous proposons dans cette thèse une technique de contre-réaction positive, basée sur la transposition de fréquences, qui permet un filtrage RF sélectif dès l’entrée du récepteur. Cette architecture diminue les contraintes de linéarité dès l’entrée du LNA. Ce filtrage est en plus re

APA, Harvard, Vancouver, ISO, and other styles

22

Pastore, Carine. "Evaluation de back-end of line optimisés pour les inductances intégrées en technologies CMOS et BiCMOS avancées visant les applications radiofréquences." Phd thesis, Grenoble 1, 2009. http://www.theses.fr/2009GRE10081.

Full text

Abstract:

Intégrées aux niveaux des interconnexions en technologies CMOS et BiCMOS, les inductances doivent répondre aux critères de fortes performances électriques, faible surface et/ou forts courants. Mais le défi n'est pas simple à relever. En effet, l'évolution du Back-End Of Line (BEOL) des technologies CMOS avancées et l'utilisation d'un substrat silicium à pertes tendent à dégrader fortement leurs performances. Ainsi, le développement de BEOL optimisés pour les inductances intégrées apparaît comme indispensable si on veut pouvoir répondre aux spécifications des circuits RF visés. Le principal obj

APA, Harvard, Vancouver, ISO, and other styles

23

Souto-Lebel, Aurélien. "Rôle de l’intégrité de surface dans la tenue en fatigue d’un acier bainitique après fraisage de finition." Thesis, Cachan, Ecole normale supérieure, 2014. http://www.theses.fr/2014DENS0028/document.

Full text

Abstract:

L’objet de cette thèse est la prise en compte des effets du fraisage de finition dans un modèle d’endommagement en fatigue. Les procédés d’usinage tels que le fraisage sont connus pour imposer de fortes sollicitations thermomécaniques, pouvant altérer les propriétés géométriques (rugosité, arrachements) et mécaniques (contraintes résiduelles, écrouissages) en surface et sous-surface des pièces produites. Ces propriétés, regroupées sous le terme d’intégrité de surface, sont susceptibles d’affecter significativement la tenue en fatigue des pièces fabriquées. Cette problématique a été traitée pou

APA, Harvard, Vancouver, ISO, and other styles

24

Abbou, Sofyane. "Phénomènes locaux instationnaires dans les piles à combustible à membrane (PEMFC) fonctionnant en mode bouché (dead-end)." Thesis, Université de Lorraine, 2015. http://www.theses.fr/2015LORR0208/document.

Full text

Abstract:

Cette thèse concerne les phénomènes locaux qui se produisent dans une pile à combustible à membrane (PEMFC) fonctionnant en mode bouché. Ce mode de fonctionnement consiste à alimenter l’anode en hydrogène sec tout en maintenant sa sortie fermée ce qui favorise l’accumulation d’eau et d’azote (issus du compartiment cathodique) près de la sortie anodique. Certaines régions sont donc convenablement alimentées en gaz tandis que d’autres ne le sont plus. Ces déséquilibres s’accompagnent de hausses localisées de potentiel (à l'anode et à la cathode) qui accélèrent la dégradation du catalyseur et de

APA, Harvard, Vancouver, ISO, and other styles

25

Bengtsson, Asplin Björn, and Tommy Norén. "Fasadpanelens fuktskydd : Har droppnäsan någon betydelse?" Thesis, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-32395.

Full text

Abstract:

Fuktinnehållet i fasadpaneler av trä varierar över tid beroende på faktorer som till exempel frekvensen av slagregn. Fasadpaneler kan ta skada av inträngande fukt och bör därför skyddas på bästa sätt för att inte förlora den primära funktionen att stoppa snö och regn att ta sig innanför byggnadens omslutande klimatskal. Forskningsstudier visar att ett grundläggande fuktskydd kan skapas genom att ytbehandla fasadpanelen och välja rätt träslag. Ett annat känt fuktskyddsråd inom byggbranschen är att snedsåga ändträet på fasadpanelen (även kallad droppnäsa), men inga studier kunde identifieras som

APA, Harvard, Vancouver, ISO, and other styles

26

Park, Heung-Shik. "Self-assembly of lyotropic chromonic liquid crystals: Effects of additives and applications." Kent State University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=kent1291043533.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Sirois, Cherilyn M. "Nucleic Acid Sensing by the Immune System: Roles For the Receptor For Advanced Glycation End Products (RAGE) and Intracellular Receptor Proteins: A Dissertation." eScholarship@UMMS, 2011. https://escholarship.umassmed.edu/gsbs_diss/551.

Full text

Abstract:

As humans, we inhabit an environment shared with many microorganisms, some of which are harmless or beneficial, and others which represent a threat to our health. A complex network of organs, cells and their protein products form our bodies’ immune system, tasked with detecting these potentially harmful agents and eliminating them. This same system also serves to detect changes in the healthy balance of normal functions in the body, and for repairing tissue damage caused by injury. Immune recognition of nucleic acids, DNA and RNA, is one way that the body detects invading pathogens and initiat

APA, Harvard, Vancouver, ISO, and other styles

28

Савчук, Володимир Іванович, Владимир Иванович Савчук, Volodymyr Ivanovych Savchuk та Ю. В. Пузік. "Підвищення якості торцевих поверхонь корпусних деталей шляхом вдосконалення процесу притирання". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/39637.

Full text

Abstract:

Багато корпусних деталей мають торцеві поверхні, до яких висуваються підвищені вимоги щодо шорсткості й точності форми. Зокрема корпус 195-05-1873, який входить до складу торцевого ущільнення насоса ГЦН-195М, має торцеву поверхню, шорсткість якої не повинна перевищувати Ra = 0,2 мкм, а відхилення від площинності – 0,002 мм.

APA, Harvard, Vancouver, ISO, and other styles

29

Zhang, Xiujuan. "Improvements in the Mechanical Properties of Some Biodegradable Polymers and Bimodal Poly(dimethylsiloxane) Hydrogels and Surface Hydrophilic Treatments." University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1240666875.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Oudini, Noureddine. "Modélisation d'une source d'ions à effet Hall pour des applications de traitement de surface." Phd thesis, Toulouse 3, 2011. http://thesesups.ups-tlse.fr/1368/.

Full text

Abstract:

Dans les sources d'ions de type EHIS " End-Hall Ion Source " un faisceau ionique est extrait d'un plasma magnétisé sans l'utilisation d'un système de grilles d'extraction. Les sources EHIS sont essentiellement utilisées dans des procédés de traitement de surface. Dans ce type de sources, le plasma est généré par l'application d'une tension entre les électrodes afin de créer une décharge DC. La présence, dans le plasma, d'un champ magnétique parallèle à une anode conique réduit la mobilité électronique dans la direction perpendiculaire aux lignes de champ magnétique. La chute de conductivité él

APA, Harvard, Vancouver, ISO, and other styles

31

Guan, Yanlin. "Interactive and immersive surface interrogation techniques over triangulated surfaces." Diss., Mississippi State : Mississippi State University, 2003. http://library.msstate.edu/etd/show.asp?etd=etd-04142003-173417.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Kleinfehn, Alex Patrick. "Scale-Up of Modifiable Poly(propylene fumarate) and Surface Functionalization of Additive Manufactured Scaffolds for Bone Tissue Regeneration." University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron1562679460809562.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Ratzkin, Jesse. "An end-to-end gluing construction for surfaces of constant mean curvature /." Thesis, Connect to this title online; UW restricted, 2001. http://hdl.handle.net/1773/5798.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Oudini, Noureddine. "Modélisation d'une source d'ions à effet Hall pour des applications de traitement de surface." Phd thesis, Université Paul Sabatier - Toulouse III, 2011. http://tel.archives-ouvertes.fr/tel-00641383.

Full text

Abstract:

Dans les sources d'ions de type EHIS " End-Hall Ion Source " un faisceau ionique est extrait d'un plasma magnétisé sans l'utilisation d'un système de grilles d'extraction. Les sources EHIS sont essentiellement utilisées dans des procédés de traitement de surface. Dans ce type de sources, le plasma est généré par l'application d'une tension entre les électrodes afin de créer une décharge DC. La présence, dans le plasma, d'un champ magnétique parallèle à une anode conique réduit la mobilité électronique dans la direction perpendiculaire aux lignes de champ magnétique. La chute de conductivité él

APA, Harvard, Vancouver, ISO, and other styles

35

Chakrabarty, Souvik. "NOVEL SOFT SURFACES WITH INTERESTING SURFACE AND BULK MORPHOLOGY." VCU Scholars Compass, 2012. http://scholarscompass.vcu.edu/etd/397.

Full text

Abstract:

The goal of this research is to cover a broad set of scientific investigations of elastomeric materials based on polydimethylsiloxane (PDMS) and poly((3,3,3-trifluoroethoxymethyl)methyloxetane) diol. The scope of study covers five areas, well correlated with each other. The first study investigates the near surface morphology of condensation cured PDMS as a function of increasing the amount of siliceous phase. The appearance, disappearance and reappearance of untreated fumed silica nanoparticles at the PDMS near surface and their correlation with the volume fraction of siliceous phase have bee

APA, Harvard, Vancouver, ISO, and other styles

36

Assis, Cleiton Lazaro Fazolo de. "Microfresamento de aços com grãos ultrafinos." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/18/18145/tde-13082014-152804/.

Full text

Abstract:

A micromanufatura via usinagem apresenta algumas dificuldades, principalmente aquelas relacionadas à formação do cavaco, pois a espessura de corte passa a ter a dimensão do tamanho de grão do material da peça e da microgeometria da aresta de corte. Em operações de microcorte, a microestrutura do material é um fator importante no controle da geração da superfície da peça, mecanismo de formação de cavaco, etc. Este trabalho de pesquisa avaliou o efeito do tamanho ultrafino dos grãos do material da peça sobre os fenômenos inerentes ao corte no microfresamento. As variáveis de usinagem investigada

APA, Harvard, Vancouver, ISO, and other styles

37

Ayadi, Yosri. "3D integration of single electron transistors in the Back-End-Of-Line of 28 nm CMOS technology for the development of ultra-low power sensors." Thèse, Université de Sherbrooke, 2016. http://hdl.handle.net/11143/10122.

Full text

Abstract:

La forte demande et le besoin d’intégration hétérogène de nouvelles fonctionnalités dans les systèmes mobiles et autonomes, tels que les mémoires, capteurs, et interfaces de communication doit prendre en compte les problématiques d’hétérogénéité, de consommation d’énergie et de dissipation de chaleur. Les systèmes mobiles intelligents sont déjà dotés de plusieurs composants de type capteur comme les accéléromètres, les thermomètres et les détecteurs infrarouge. Cependant, jusqu’à aujourd’hui l’intégration de capteurs chimiques dans des systèmes compacts sur puce reste limitée pour des raisons

APA, Harvard, Vancouver, ISO, and other styles

38

Schaub, Thomas Francis. "Chain end segregation at polymer thin film surfaces." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/32664.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Lee, Ivan H. (Ivan Hao) 1967. "Covalent end-immobilization of oligonucleotides onto solid surfaces." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8202.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, 2001.<br>Includes bibliographical references.<br>With the completion of the Human Genome Project, the focus of genetics research has shifted towards functional genomics, with emphasis on gene expression and polymorphism studies. To this end, there is rapidly increasing interest in solid-phase, high-throughput, combinatorial microarrays for DNA assays. For this purpose I synthesized oligonucleotides (oligos) stepwise onto derivatized SiO2 surfaces. Then double-stranded (ds)DNA molecules with "dangling end" ol

APA, Harvard, Vancouver, ISO, and other styles

40

Stella, Federico. "Learning a Local Reference Frame for Point Clouds using Spherical CNNs." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20197/.

Full text

Abstract:

Uno dei problemi più importanti della 3D Computer Vision è il cosiddetto surface matching, che consiste nel trovare corrispondenze tra oggetti tridimensionali. Attualmente il problema viene affrontato calcolando delle feature locali e compatte, chiamate descrittori, che devono essere riconosciute e messe in corrispondenza al mutare della posa dell'oggetto nello spazio, e devono quindi essere invarianti rispetto all'orientazione. Il metodo più usato per ottenere questa proprietà consiste nell'utilizzare dei Local Reference Frame (LRF): sistemi di coordinate locali che forniscono un'orientazione

APA, Harvard, Vancouver, ISO, and other styles

41

Lawson, Glenn E. "The effects of evaporation rate, solvent, and substrate on the surface segregation of block copolymers." Thesis, This resource online, 1985. http://scholar.lib.vt.edu/theses/available/etd-03042009-041008/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Guillemot, Nicolas. "Prise en compte de l'intégrité de surface pour la prévision de la tenue en fatigue de pièces usinées en fraisage." Phd thesis, École normale supérieure de Cachan - ENS Cachan, 2010. http://tel.archives-ouvertes.fr/tel-00610030.

Full text

Abstract:

Cette étude est dédiée à l'influence du fraisage de finition avec outil à extrémité hémisphérique sur l'intégrité de surface et la durée de vie en fatigue de pièces en acier bainitique à haute limite d'élasticité. L'intégrité de surface - microgéométrie, contraintes résiduelles et écrouissage - est caractérisée expérimentalement pour différentes valeurs des paramètres d'usinage, dont l'angle d'inclinaison de l'outil. L'hétérogénéité du champ de contraintes résiduelles perpendiculairement aux sillons générés par l'outil est mise en évidence à différentes profondeurs. Des essais de fatigue en fl

APA, Harvard, Vancouver, ISO, and other styles

43

Standingford, David William Fin. "Optimal lifting surfaces, including end plates, ground effect & thickness /." Title page, contents and abstract only, 1997. http://web4.library.adelaide.edu.au/theses/09PH/09phs785.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Souza, Adilson Pacheco de 1982. "Evoluções, frações e estimativas das irradiações global, direta e difusa em superfícies inclinadas /." Botucatu : [s.n.], 2009. http://hdl.handle.net/11449/93773.

Full text

Abstract:

Orientador: João Francisco Escobedo<br>Banca: Dinival Martins<br>Banca: Alexandre Dal Pai<br>Resumo: Este trabalho objetivou apresentar a evolução anual das irradiações global ( d ) G H b , direta ( d ) B H b e difusa de referência ( d ) DR H b média mensal com medidas diárias incidentes sobre superfícies inclinadas a 12,85º L − 10º , 22,85º L e 32,85º L + 10º com a face voltada para o Norte e as estimativas das três irradiações com base em medidas da irradiação global na horizontal e da razão de insolação. O periodo de dados considerado no estudo foi de 1998 a 2007, com medidas realizadas ent

APA, Harvard, Vancouver, ISO, and other styles

45

Mercure, Jean-François. "The de Haas van Alphen effect near a quantum critical end point in Sr₃Ru₂O₇ /." St Andrews, 2008. http://hdl.handle.net/10023/683.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Verma, Poonam Santosh. "Large Scale Computer Investigations of Non-Equilibrium Surface Growth for Surfaces From Parallel Discrete Event Simulations." MSSTATE, 2004. http://sun.library.msstate.edu/ETD-db/theses/available/etd-04192004-140532/.

Full text

Abstract:

The asymptotic scaling properties of conservative algorithms for parallel discrete-event simulations (e.g.: for spatially distributed parallel simulations of dynamic Monte Carlo for spin systems) of one-dimensional systems with system size $L$ is studied. The particular case studied here is the case of one or two elements assigned to each processor element. The previously studied case of one element per processor is reviewed, and the two elements per processor case is presented. The key concept is a simulated time horizon which is an evolving non equilibrium surface, specific for the particula

APA, Harvard, Vancouver, ISO, and other styles

47

Wang, Nan. "Tool path generation method for 5-axis NC machining with flat-end cutter /." View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?MECH%202009%20WANG.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Bernstein, Jacob Ph D. Massachusetts Institute of Technology. "Conformal and asymptotic properties of embedded genus-g minimal surfaces with one end." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/50592.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mathematics, 2009.<br>Includes bibliographical references (p. 79-82).<br>Using the tools developed by Colding and Minicozzi in their study of the structure of embedded minimal surfaces in R3 [12, 19-22], we investigate the conformal and asymptotic properties of complete, embedded minimal surfaces of finite genus and one end. We first present a more geometric proof of the uniqueness of the helicoid than the original, due to Meeks and Rosenberg [45]. That is, the only properly embedded and complete minimal disks in R3 are the plane

APA, Harvard, Vancouver, ISO, and other styles

49

Murphy, Sherry M. "SURFACE." Digital Commons @ East Tennessee State University, 2013. https://dc.etsu.edu/etd/1152.

Full text

Abstract:

This thesis paper supports the Master of Fine Arts exhibition at the Tipton Gallery, East Tennessee State University, from January 28th through February 8th, 2013. The exhibit is comprised of two hundred fifty-three porcelain objects and lines created with naturally colored porcelain slips used as paint. SURFACE presents my exploration of the natural world; the experiences and memories created during this process compelled this exhibition. Topics discussed are the influences, concepts, techniques, and methods used to create the work. Included are process images, detail images, and images of se

APA, Harvard, Vancouver, ISO, and other styles

50

Khire, Vaibhav S. "Surface modification using thiol-ene and thiol-acrylate polymerizations." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3303897.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!