Relevant bibliographies by topics / Energy–flat morphism

Contents

  1. Journal articles
  2. Conference papers

Academic literature on the topic 'Energy–flat morphism'

Author: Grafiati
Published: 2 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Energy–flat morphism.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Energy–flat morphism"

1

Chillara, Venkata Siva C., Leon M. Headings, Ryohei Tsuruta, Eiji Itakura, Umesh Gandhi, and Marcelo J. Dapino. "Shape memory alloy–actuated prestressed composites with application to morphing automotive fender skirts." Journal of Intelligent Material Systems and Structures 30, no. 3 (2018): 479–94. http://dx.doi.org/10.1177/1045389x18812702.

Full text
Abstract:
This work presents smart laminated composites that enable morphing vehicle structures. Morphing panels can be effective for drag reduction, for example, adaptive fender skirts. Mechanical prestress provides tailored curvature in composites without the drawbacks of thermally induced residual stress. When driven by smart materials such as shape memory alloys, mechanically-prestressed composites can serve as building blocks for morphing structures. An analytical energy-based model is presented to calculate the curved shape of a composite as a function of force applied by an embedded actuator. Sha
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Changlei, Zirong Luo, Zhongyue Lu, Jianzhong Shang, Mangkuan Wang, and Yiming Zhu. "Design and CFD Analysis of the Energy Efficiency of a Point Wave Energy Converter Using Passive Morphing Blades." Energies 16, no. 1 (2022): 204. http://dx.doi.org/10.3390/en16010204.

Full text
Abstract:
A wave energy converter features the ability to convert wave energy into the electrical energy required by unmanned devices, and its energy-conversion efficiency is an essential aspect in practical applications. This paper proposes a novel point-absorption wave energy converter with passive morphing blades to meet the demand for improved energy-conversion efficiency. We first introduce its concept and design, with its blades forming their shape by adaptive changes with the direction of the water flow. Next, the three-dimensional geometrical-morphing model, energy-conversion model, and energy-c
APA, Harvard, Vancouver, ISO, and other styles
3

Liao, Feng-Chi, Ming-Jen Cheng, and Ruey-Lung Hwang. "Influence of Urban Microclimate on Air-Conditioning Energy Needs and Indoor Thermal Comfort in Houses." Advances in Meteorology 2015 (2015): 1–9. http://dx.doi.org/10.1155/2015/585623.

Full text
Abstract:
A long-term climate measurement was implemented in the third largest city of Taiwan, for the check of accuracy of morphing approach on generating the hourly data of urban local climate. Based on observed and morphed meteorological data, building energy simulation software EnergyPlus was used to simulate the cooling energy consumption of an air-conditioned typical flat and the thermal comfort level of a naturally ventilated typical flat. The simulated results were used to quantitatively discuss the effect of urban microclimate on the energy consumption as well as thermal comfort of residential
APA, Harvard, Vancouver, ISO, and other styles
4

Abdessemed, Chawki, Abdessalem Bouferrouk, and Yufeng Yao. "Effects of an Unsteady Morphing Wing with Seamless Side-Edge Transition on Aerodynamic Performance." Energies 15, no. 3 (2022): 1093. http://dx.doi.org/10.3390/en15031093.

Full text
Abstract:
This paper presents an unsteady flow analysis of a 3D wing with a morphing trailing edge flap (TEF) and a seamless side-edge transition between the morphed and static parts of a wing by introducing an unsteady parametrization method. First, a 3D steady Reynolds-averaged Navier–Stokes (RANS) analysis of a statically morphed TEF with seamless transition is performed and the results are compared with both a baseline clean wing and a wing with a traditional hinged flap configuration at a Reynolds number of 0.7 × 106 for a range of angles of attack (AoA), from 4° to 15°. This study extends some pre
APA, Harvard, Vancouver, ISO, and other styles
5

Joshi, Aditya. "Twist Morphing: A Simulation Approach to Compare Twist Morphed Wing and Flap Configuration." International Journal for Research in Applied Science and Engineering Technology 9, no. 10 (2021): 353–59. http://dx.doi.org/10.22214/ijraset.2021.38418.

Full text
Abstract:
Abstract: The aim of the work is to explore and justify an innovative concept in the niche of aerospace industry called as Wing Morphing. To narrow down the study, specifically twist morphing is taken into consideration. Wings with twist and their flap counterparts are compared in similar conditions and their aerodynamic efficiency is observed. The project implementation is done with XFLR5, a VLM solver software. The results show that this concept brings about an improvement in the aerodynamic efficiency without adding much to the drag penalty. Keywords: Wing Morphing, Twist Morphing, Cl (coef
APA, Harvard, Vancouver, ISO, and other styles
6

Leonard, Christian, Erwan Eko Prasetiyo, and Ikbal Rizki Putra. "Design and implementation of electrical system morphing wing flight control on prototype light aircraft." International Journal of Power Electronics and Drive Systems (IJPEDS) 14, no. 2 (2023): 781. http://dx.doi.org/10.11591/ijpeds.v14.i2.pp781-788.

Full text
Abstract:
This journal discusses the implementation and testing of the electrical morphing wing system on light aircraft prototypes, namely technology on the wing to increase the value of aerodynamic efficiency on the wing surface with experimental methods based on knowledge obtained from various literature sources. Using a configuration of eight servo actuators arranged in parallel for the aileron and flap functions as well as setting and control with a six-channel Flysky-FSi6 remote to control the movement of the master and slave aileron actuators as well as the flap function on the morphing wing. The
APA, Harvard, Vancouver, ISO, and other styles
7

Akhter, Md Zishan, Farag Khalifa Omar, and Emad Elnajjar. "Aerodynamic and aeroacoustic characteristics of a bionic morphing flap." Energy Reports 9 (November 2023): 310–15. http://dx.doi.org/10.1016/j.egyr.2023.10.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Akhter, Md Zishan, Ahmed Riyadh Ali, and Farag Khalifa Omar. "Aerodynamics of a three-dimensional bionic morphing flap." Sustainable Energy Technologies and Assessments 52 (August 2022): 102286. http://dx.doi.org/10.1016/j.seta.2022.102286.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Saparova, Ulbosin, Klara Iniyatova, Qabilbay Toqsanbaev, and Kundizay Joldasova. "Construction of smart actuators brakes for smart city using geoinformation technologies." BIO Web of Conferences 140 (2024): 01009. http://dx.doi.org/10.1051/bioconf/202414001009.

Full text
Abstract:
Actuator manufacturers are presently developing cutting-edge technologies, such as GIS technologies, that fulfill the necessary standards for performance, weight, and power consumption. Historically, manufacturers have selected actuators based on their ability to manipulate and regulate loads. This conceals the dynamic components of certain action solutions. Metrics of significant importance include the duration required to generate this mechanical energy and the amount of work the mechanism performs per unit mass. We utilized these values to establish a selection methodology. Considering the
APA, Harvard, Vancouver, ISO, and other styles
10

Schutzeichel, Maximilian Otto Heinrich, Thorben Strübing, Ozan Tamer, Thomas Kletschkowski, Hans Peter Monner, and Michael Sinapius. "Experimental and Numerical Investigation of a Multifunctional CFRP towards Heat Convection under Aircraft Icing Conditions." Applied Mechanics 3, no. 3 (2022): 995–1018. http://dx.doi.org/10.3390/applmech3030056.

Full text
Abstract:
A combined experimental and numerical approach for the analysis of convective heat transfer from a multifunctional flat plate specimen under aircraft icing conditions is presented. The experimental setup including a heat control and measurement system that is installed in a de-icing test bed. The ambient temperature (θa=[253,283]K), air velocity (va={0,15,30}ms), and angle of attack (α={10,30}∘) are varied, and their influence on heat transfer during local Joule heating is discussed. The numerical approach utilises the results to compute the convective heat transfer coefficients (HTC) based on
APA, Harvard, Vancouver, ISO, and other styles
More sources

Conference papers on the topic "Energy–flat morphism"

1

Daynes, Stephen, and Paul M. Weaver. "A Morphing Wind Turbine Blade Control Surface." In ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/smasis2011-4961.

Full text
Abstract:
The loads on wind turbine components are primarily from the blades. It is important to control these blade loads in order to avoid damaging the wind turbine. Rotor control technology is currently limited to controlling the rotor speed and the pitch of the blades. As blades increase in length it becomes less desirable to pitch the entire blade as a single rigid body, but instead there is a requirement to control loads more precisely along the length of the blade. This can be achieved with aerodynamic control devices such as flaps. Morphing technologies are good candidates for wind turbine flaps
APA, Harvard, Vancouver, ISO, and other styles
2

Vidyarthi, Kushagra, Mark Voskuijl, Roeland Breuker, Marilena Pavel, and Yasir Zahoor. "Active and Passive Camber Morphing for Helicopter Rotors towards Performance Improvements in Hover and Vertical Flight." In Vertical Flight Society 76th Annual Forum & Technology Display. The Vertical Flight Society, 2020. http://dx.doi.org/10.4050/f-0076-2020-16446.

Full text
Abstract:
Rotor morphing has been investigated in the past for improvement of rotor performance, either for reduction of rotor power demand or for vibratory load alleviation. The present study investigates the application of camber morphing for improvement of rotor performance in hover and vertical flight conditions, with a particular focus on the combination of camber morphing systems and variable RPM rotors. Camber morphing utilizes a smooth flap at the trailing edge of the rotor blade to modify the camber of blade airfoil sections without excessive drag penalties. Two different camber morphing system
APA, Harvard, Vancouver, ISO, and other styles
3

Alfattani, Rami, and Craig Lusk. "Shape-Morphing Using Bistable Triangles With Dwell-Enhanced Stability." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-86235.

Full text
Abstract:
This paper presents a new design concept for a morphing triangle-shaped compliant mechanism. The novel design is a bistable mechanism that has one changeable side. These morphing triangles may be arrayed to create shapemorphing structures. The mechanism was based on a six-bar dwell mechanism that can fit in a triangle shape and has stable positions at the motion-limit (dead-center) positions. An example of the triangle-shaped compliant mechanism was designed and prototyped: an isosceles triangle with a vertex that changes from 120 degrees to 90 degrees and vice versa. Three of these in the 120
APA, Harvard, Vancouver, ISO, and other styles
4

Puttmann, John, Richard Beblo, James Joo, Brian Smyers, and Gregory Reich. "Design of a Morphing Skin by Optimizing a Honeycomb Structure With a Two-Phase Material Infill." In ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8131.

Full text
Abstract:
For morphing wing skin applications, low in-plane stiffness is advantageous to reduce the cost of actuation and high out-of-plane stiffness is required to withstand the aerodynamic loads. A proposed solution is to engineer a composite material made of a honeycomb support combined with a multi-state infill that can reduce the Young’s modulus for a low in-plane stiffness. Assuming thin beam theory and using the potential energy formulation, equivalent in-plane Young’s moduli can be calculated for a range of honeycomb cell geometries. The out-of-plane deflection of a representative plate fixed on
APA, Harvard, Vancouver, ISO, and other styles
5

Paternoster, Alexandre, Andre de Boer, Richard Loendersloot, and Remko Akkerman. "Actuators for Smart Applications." In ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2010. http://dx.doi.org/10.1115/smasis2010-3905.

Full text
Abstract:
Actuator manufacturers are developing promising technologies which meet high requirements in performance, weight and power consumption. Conventionally, actuators are characterized by their displacement and load performance. This hides the dynamic aspects of those actuation solutions. Work per weight performed by an actuation mechanism and the time needed to develop this mechanical energy are by far more relevant figures. Based on these figures, a selection process was developed. With time and energy constraints, it highlights the most weight efficient actuators. This process has been applied t
APA, Harvard, Vancouver, ISO, and other styles
6

Rea, Francesco, Francesco Amoroso, Rosario Pecora, and Markus Kintscher. "Design of an Adaptive Twist Trailing Edge for Large Commercial Aircraft Applications." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-7939.

Full text
Abstract:
Researchers and engineers design modern aircraft wings to reach high levels of efficiency with the main outcome of weight saving and airplane lift-to-drag ratio increasing. Future commercial aircraft need to be mission-adaptive to improve their operational efficiency. Twistable trailing edge could be used to improve aircraft performances during climb and off-design cruise conditions in response to variations in speed, altitude, air temperature, and other flight parameters. Indeed, “continuous” span-wise twist of the wing trailing edge could provide significant reduction of the wing root bendin
APA, Harvard, Vancouver, ISO, and other styles
7

Pohl, Martin, Johannes Riemenschneider, and Hans Peter Monner. "Design and Experimental Investigation of a Flexible Trailing Edge for Wind Energy Turbine Blades." In ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/smasis2020-2256.

Full text
Abstract:
Abstract The demand of affordable, renewable electric energy is still increasing. Wind energy is seen as one of the most promising resources for future electric energy supply. To reduce the cost of wind energy the dimensions of wind energy turbines are still increasing. This leads to higher power output due to the larger rotor diameters, but also due to the higher wind speeds above the boundary layer. This increase in rotor diameter is achieved at the expense of much higher structural loads especially in the rotor blade root. These loads consist of bending moments, that are mainly caused by gr
APA, Harvard, Vancouver, ISO, and other styles
8

Harnett, C. K., and C. J. Kimmer. "Digital Origami From Geometrically Frustrated Tiles." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-13477.

Full text
Abstract:
This paper describes “digital origami” from geometrically frustrated tiles: arrays of structures that cannot attain an energetically favorable flat state because of internal constraints. Each tile can typically snap between two symmetric energy-minimizing states, and neighboring tiles are coupled so that a collection of binary tile states determines the local curvature of the entire sheet. Modular structures like these tiles give great advantages in manufacturing and in predictive simulation, and their discrete nature is a good match for digital readout and control of self-folding systems. The
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Energy–flat morphism' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography