Dissertations / Theses on the topic 'Energy sector; buildings sector; energy efficiency'

Climate change is one of the global challenges of our time. The energy sector is at the focus of the European efforts to combat climate change as it accounts for 80% of the total greenhouse gas emissions in the European Union. Buildings, on the other hand, represent 40% of the energy use and 33% of the total greenhouse gas emissions in the European Union, giving the buildings sector also a key role in the European climate strategy. There are, at the same time, strong interdependencies between the energy and buildings sectors due to the high amount of energy used by buildings and their rising importance as active components in the future energy systems. These interdependencies do not only influence the investment decisions in the energy and buildings sectors, but also the effectiveness of the European climate strategy. Cooperation between the energy and buildings sectors can create beneficial outcomes for the both sectors as well as the environment. It may also encourage innovation, improve the energy performance of buildings, and help achieve a higher penetration of renewable energy into the energy system. This licentiate thesis investigates the relationship between the energy and buildings sector at the inter-company level. Presenting the data collected from interviews and a web survey answered by the energy and buildings sectors in Sweden, this thesis examines the level of cooperation between these two sectors, discusses trust issues between stakeholders, presents the factors that negatively impact cooperation, and provides recommendations for the minimisation of these factors. The findings presented in this thesis indicate an insufficient level of cooperation between the energy and buildings sectors in Sweden, to which the following factors have been identified to contribute in a negative a way: district heating monopolies; energy efficiency in buildings; building regulations; self-generation of electricity; and energy use patterns. The emphasis on self-interest by stakeholders within the both sectors appears to create trust issues between stakeholders. Accordingly, shifting the focus from self-gains to mutual gains is deemed necessary to improve the cooperation between the energy and buildings sectors. This, however requires significant changes in current practices and business models. It has been identified that the development of smart energy systems that allow a closer interaction between the energy and buildings sectors through flexible energy supply and use would minimise many of the factors that negatively impact cooperation.<br>Klimatförändringen är en av de stora globala utmaningar vi står inför. I Europa läggs idag stort fokus på energisektorn, som står för 80 procent av det totala utsläppen av växthusgaser. Byggnader representerar 40 procent av energianvändningen och 33 procent av växthusutsläppen, vilket också ger byggsektorn en nyckelroll i den europeiska klimatstrategin. Samtidigt finns det starka beroendeförhållanden mellan energi- och byggsektorn på grund av den höga energianvändningen i byggnader och deras ökade betydelse som en aktiv komponent i det framtida energisystemet. Dessa beroendeförhållanden påverkar inte bara investeringsbeslut i de båda sektorerna, utan även effektiviteten i den europeiska klimatstrategin. Samarbete mellan energi- och byggsektorn kan få positiva effekter för både dem själva såväl som för miljön. Samarbete mellan sektorerna kan även uppmuntra innovation, förbättra energieffektiviteten i byggnader och tillåta en högre användning av förnyelsebar energi i energisystemet.  Denna licentiatavhandling utforskar förhållandet mellan energi- och byggsektorn på företagsnivå genom att analysera data som samlats in med hjälp av intervjuer och en webbaserad enkät.  Intervjuer och enkäter har besvarades av både energi- och byggsektorerna i Sverige. Denna avhandling studerar nivån av samarbete mellan de två sektorerna, diskuterar problem gällande förtroende mellan intressenter, presenterar de identifierade faktorer som försvårar samarbete och ger rekommendationer för att minimera dessa. Resultatet visar på en otillräcklig nivå av samarbete mellan energi- och byggsektorerna i Sverige. De faktorer som försvårar samarbetet är följande: fjärrvärmemonopol; energieffektivitet i byggnader; byggregler, egenproduktion av el och användarmönster. Naturligt finns ett egenintresse hos olika intressenter inom de båda sektorerna, och detta tycks ha skapat ett förtroendeproblem mellan de olika sektorerna Att byta fokus från egen vinning till gemensamma mål bedöms vara nödvändigt för att öka samarbetet mellan energi- och byggsektorerna. Detta fodrar dock stora förändringar både i nuvarande verksamhet samt i affärsmodellerna. Det har påvisats att utvecklandet av smarta energisystem som tillåter en större interaktion mellan energi- och byggsektorerna genom flexibel energiförsörjning och användning skulle minimera många av de faktorer som inverkar negativt på samarbetet.

This report discusses the ambition of EDF, a French electricity provider, to offer new services to its customers. With the emergence of the smart grid that will be operational in 2020 in France, there are several opportunities that have to be taken. One of them is to be able to offer a suitable monitoring system to its customer. This study tried to emphasize the important aspects and features that are required in such a system. Several solutions that are currently being commercialized in France have been analyzed. A grading has been made according to the technical functionalities and the business models have been analyzed.  Recommendations for EDF have also been made in order to help the company to choose the right monitoring system.

Today's energy policy has to be more stringent if the necessary decrease in energy use is to befulfilled. Considerable investments are needed and it is important to realize that this will eventually pay off in the economy although it will take longer time than usual. Instead o fcalculating on a two year return for a building complex, it could result in a ten year return but then the building most likely are more energy efficient and pays off in the long run.Energy efficiency measurements are the cheapest and most important way to reach the 50/50 goal but one of the biggest issues is the unawareness for energy efficiency options in the building sector. Energy efficiency measures must be carefully planned and performed way ahead of time because the right opportunity to improve a building seldom appears. The technology exists, the information is there and some of the financial support is also there. Still there are many who don't invest; or invest with poor results because of insufficient knowledge or understanding. Financial barrier is the most common obstacle when it comes to reducing energy usage and that's because energy savings isn't a clear investment or investors don't have the adequate understanding many opportunities are lost.It is very important to have clear goals and a support system that produce efficient investments. Property owners today do not invest enough in energy reducing measurements because they under-value the future energy price. The support systems and building regulations should only support refurbishment projects that intend to do deep refurbishment measurements. The policies and building regulations have to be adjusted to a necessary level as soon as possible so these few opportunities are seized. Cooperation, not only between companies, organizations and institutions but countries as well, contributes a lot in the pursuit of lowering the energy demand. This is probably the reason why the Nordic countries of Europe are well adjusted in the present building market. Clear and ambitious goals are the key to have good communication and effects in the building sector just as the Nordic countries have had throughout the twenties century. Sweden is raising awareness; cooperation and investing in both education and refurbishments that will help Sweden reach the energy efficiency targets of the year 2050. Although three factors are crucial; involving the whole building stock, applying an effective financial support system and creating clear goals of how the 50 / 50 target will be reached. The goal for the Swedish building stock is to reduce its total purchased energy demand,including household electricity by 50 % by the year of 2050 compared to the amount of 1995. To examine if the goal is reasonable, a detailed case study, that is limited to one hotel in Oslo, built 2009, was simulated in IDA ICE 4.7 and then virtually improved. The ventilation system was upgraded, the indoor temperature tolerance was adjusted and the lighting was upgraded.The result from the computer calculations indicates very significant possibilities for energy efficiency for this building. This also confirms the general impression of a significant general potential for increased energy efficiency within the building sector. It is possible to achieve the goal for a 50 % reduction for purchased energy for the building sector, but it will need incitement that creates a better economy for energy efficiency investments and very stringent energy requirements also for existing buildings.

Achieving sustainable consumption of energy is an important issue due to the increasing demand for energy and its environmental impact. One of the biggest consumers of the global energy production is the residential sector. Factors determining pattern of energy consumption in this sector are firstly, characteristics of the buildings and equipment and appliances which are used inside them and secondly, people who are using the buildings. The former could be approached by using efficiency strategies; i.e. designing and using materials and utilities which are low energy demanding or reducing consumption of energy. The latter could be reached by adoption of demand side management strategies which could improve pattern of energy consumption by the end users. Combining these strategies bring out energy-smart buildings with energy-smart people as the users. This project aims at introducing potential approaches to strategies of promoting sustainable behavior regarding energy consumption in individuals, with the focus on the students of Linköping University living in the properties of housing company of the city, Studentbostäder. For fulfilling this purpose, literature review has been done for finding influencing factors on and strategies for shaping of pro-environmental behavior. In the next step, two projects with focus on demand side management for changing energy consumption of individuals have been studied. Afterward, a questionnaire based on the results of the literature review was prepared and used to gain an understanding of first: attitude, values, knowledge, and awareness of students of Linköping University regarding environmental issues, and second: point of view of the students toward the strategies for shaping pro-environmental behavior. Results of the above mentioned methods were used for identifying characteristics of a demand side management project based on provision of feedback on energy consumption for the users. It has been proposed that designing and implementing such project has the potential of affecting pattern of energy consumption by people and lead to its reduction, especially among students accommodating at housing company of city of Linköping, Studentbostäder. More studies are needed for finding feasibility of implementing such project.

The purpose of this examination is to see how energy efficiency measures affect peak loads in multifamily buildings. In addition, how much of an energy share warm water has in peak loads. The Swedish building sector represents 40 % of all energy used. The thesis was restricted to multifamily buildings, which is dominated by district heating. The most common energy measures to save peak cost and reduce peak loads that are focus in this thesis work, e.g. changing windows, isolate walls and attics but also lowering indoor temperature. It was assumed in the thesis that the cost of peak loads will increase in the future and therefore the choice of energy efficiency measures is important. The calculations to determine the effectiveness of the energy measures where done by using hourly temperature data from the year 2014 in combination with, known investment costs for each energy measure. The only measures that went with profit over a 40-year period was the attics isolation and lower indoor temperature. The highest peak load savings in heating was the change of windows and wall isolation, but the investment cost was too high to gain a profit. The conclusion is that the best energy efficiency measures are attic isolation and lower indoor temperature because of its low investment cost and quick payback time, but also effective at lowering peak load by reducing the temperature difference between outdoor and indoor temperature in multifamily buildings. The analysis of warm water energy's share of the peak loads varied much between the 15 given multifamily buildings, where a base load and a peak load where compared. The result was between 10-50 % were the difference between the buildings warm water energy share off the peak loads. It where concluded that a standard value of 20 % would give much inaccuracy in determining the warm water share. It is therefore, suggested to use this method to determine the warm water share of the hourly peak load.<br>I detta arbete har syftet varit att hitta de vanligaste energieffektiviseringsåtgärderna som görs idag i det svenska bostadsbeståndet. Energieffektiviseringsåtgärderna påverkar effekttoppar i flerbostadshus och har undersökts. Om det antas att energiprisstrukturen går mot en mer effektbaserad taxa kan åtgärderna få större påverkan på energipriset i framtiden. I arbetet har varmvattnets andel av timeffekttoppar undersökts, med stöd av energianvändningsdata från 15 anonymiserade flerbostadshus med fjärrvärme. Energianvändningen i bostadsbeståndet står för ca 40 % av Sveriges energianvändning. Det ställs då krav på de lågenergihus som byggs idag och vid renovering av hus att möta Sveriges som såväl EU 2020 målet att minska energianvändningen i bostäder genom att implementera energieffektiviseringsåtgärder. De vanligaste energieffektiviseringsåtgärderna i flerbostadshus har varit isolering av väggar och vind, installation av energiglas och frånluftssystem med värmeåtervinning. En sänkt inomhus temperatur har även medtagits. För fastighetsägare av flerbostadshus, där energianvändning för uppvärmning och varmvatten domineras av fjärrvärme är prisutvecklingen viktig. Om i framtiden ett antagande görs att el och fjärrvärmepriset övergår från en energibaserad taxa kr/kWh till en mer effektbaserad taxa kr/kW där kunden betalar för de högsta effekttopparna under ett år. I denna studie redovisas det när effekttoppar uppstår och vilka energieffektiviseringsåtgärder som påverkar effekttopparna i flerbostadshus. De högsta effekttopparna uppstår oftast under vinterårstiden då uppvärmningsbehovet är störst. I ett framtaget typbostadshus där de valda energiåtgärderna beräknades, det visade sig att energiglas minskar effektbehovet och effektpriset mest, därefter väggisolering med mineralull. Emellertid ger energiglas och väggisolerings åtgärderna ger förluster i lönsamhetsberäkningen. Det skiljer sig från tilläggsisolering med mineralull av vinden och sänkt inomhus temperatur som har en investerings vinst över en 40 års period. I beräkningarna användes temperaturdata från år 2012 både på typhuset innan och efter implementerad åtgärd.En viktig parameter vid minskning av uppvärmningsbehovet är U-värdet. Tilläggsisolering av vind samt sänkt temperatur är de åtgärder som rekommenderas då båda påverkar effektbehovet och ger en lönsam investering. Åtgärd vid fönster och väggar minskar dock uppvärmningsbehovet mest men ger en olönsam ekonomisk investering. Varmvattenandelen av den högsta timeffekttoppen över året togs fram genom att jämföra baslasten och effekttoppen under dagen då effektbehovet är som högst. Resultatet visade att varmvattenandelen av effekttoppen tycks variera mellan ca 10- 50 %. Varmvattenandelen av effekttoppen varierar stort och därför föreslås användningen av metoden i detta examensarbete istället för ett schablonvärde på 20 % vid undersökning av varmvattenandelen av timeffekttoppen.

La réduction de la consommation énergétique du secteur résidentiel constitue un enjeu majeur dans un contexte de transition énergétique et de lutte contre le changement climatique. Pourtant, malgré les politiques publiques en place, la consommation énergétique sectorielle française peine à baisser. À travers quatre essais empiriques, cette thèse s’intéresse aux obstacles à la baisse des consommations énergétiques dans le secteur résidentiel français en se focalisant sur le rôle des facteurs individuels. Dans le premier chapitre, qui s’inscrit dans la littérature sur le les barrières à l’investissement en efficacité énergétique et le « paradoxe énergétique » (Jaffe and Stavins, 1994), nous utilisons la méthode des choix discrets pour mettre en évidence le rôle de l’incertitude sur la qualité des travaux de rénovation et le prix de l’énergie comme barrière à l’investissement en efficacité énergétique. Le second chapitre fournit un éclairage empirique sur le rôle des facteurs socio-économiques, des préférences individuelles pour le confort et de la performance énergétique du logement pour expliquer la consommation énergétique résidentielle. Le troisième chapitre est l’occasion d’étudier l’écart de performance énergétique à l’échelle du logement (consommation énergétique réelle vs théorique) et ses déterminants individuels et socio-économiques, via la régression quantile. Enfin, le quatrième chapitre s’intéresse aux interactions dynamiques entre efficacité énergétique et consommation énergétique en traitant la question de l’effet rebond direct pour l’usage de chauffage résidentiel en France<br>Reducing the energy consumption of the residential sector is a major stake in the context of the energy transition and the fight against climate change. However, despite the implementation of several dedicated public policies, the energy consumption of the sector has barely decreased in France. Through four empirical articles, this thesis aims to identify some of the barriers to the decrease of the French residential energy consumption with a focus on the role of individual determinants. In the first chapter, we wish to contribute to the literature on the barriers to energy efficiency investment (Sutherland, 1991) and the “energy efficiency gap” (Jaffe and Stavins, 1994). We use the methodology of the discrete choice experiment to assess the role of perceived risk and uncertainty on retrofit quality and energy price as barrier to the energy renovation decision. In the second chapter, we provide an empirical contribution on the role of individual preferences for comfort, other individual determinants and energy performance of dwellings in explaining energy consumption. In the third chapter, we study the energy performance gap (gap between theoretical and real energy consumption at dwelling level) and its drivers by using the quantile regression. Finally, in the fourth chapter, we test the assumption of the existence of a rebound effect for the heating energy consumption in France

A conjuntura nacional de crescimento econômico e populacional aliada aos programas habitacionais de combate ao déficit de moradias deixa antever o contínuo aumento da demanda energética no setor residencial, que deve ser alvo de políticas públicas de promoção de eficiência energética. O objetivo da presente dissertação é investigar o potencial do Código de Obras e Edificações (COE) do Município de São Paulo enquanto instrumento regulatório de promoção de eficiência energética e apresentar sugestões com vista à revisão do atual documento. Para tal dividiu-se a pesquisa em três temas: fatores que explicam o consumo energético (direto e indireto) das edificações e estratégias de minimização desse consumo; caracterização dos códigos de eficiência energética em edificações (CEEE), com destaque para o Código de Obras, e panorama internacional e brasileiro relativamente à sua adoção; caracterização do consumo energético do Município de São Paulo e análise dos requisitos de eficiência energética no atual COE. Atendendo à elevada taxa de novas construções e ao estoque de edifícios obsoletos com potencial de retrofitting defende-se que o Código de Obras, pela sua abrangência e obrigatoriedade, constitui um instrumento regulatório adequado à promoção da eficiência energética no setor de edificações no Município de São Paulo e sugere-se a revisão do atual COE com vista à introdução de requisitos de eficiência energética. Entre as sugestões apresentadas contam-se a segmentação das medidas dirigidas às moradias de interesse social e às chamadas edificações de mercado, definição de limites máximos para o valor de transmitância térmica dos elementos opacos da envoltória (paredes e cobertura) em ambientes condicionados e não condicionados e a exigência de um nível mínimo de eficiência energética para edificações e equipamentos instalados. Como contribuição da presente pesquisa cabe ainda destacar o cálculo da intensidade energética por unidade de área construída nos setores residencial e comercial no Município de São Paulo, indicador em falta na literatura e dados oficiais publicados.<br>The national economic and population growth in association with the housing programs to combat housing deficit are expected to result in future increase of energy demand in the residential sector. Considering the already high contribution of the building sector in the electricity consumption of Brazil, the development of policy measures aiming to promote energy efficiency in the sector should be encouraged. The main objective of this research is to investigate the potential of the Building Code (BC) of São Paulo municipality as a regulatory instrument to promote energy efficiency and make suggestions to revise it. To this end, the paper is divided in three parts: factors that explain the energy consumption (direct and indirect) of buildings and strategies to minimize it; characterization of Building Energy Efficiency Codes (BEEC) and the Brazilian and international panorama regarding its adoption; energy consumption of São Paulo municipality and analysis of energy efficiency requirements in the current BC. As a mandatory and comprehensive regulatory instrument, Building Codes are adequate do promote energy efficiency given the local reality of high annual rates of construction and the significant stock of old buildings which could benefit from retrofitting. Suggestions to a revision process of the BC of São Paulo Municipality include segmentation of energy efficient requirements according to social economic profile of buildings, definition of overall heat transfer coefficient values (U-factor) for building envelope components (walls and roof) of conditioned and non-conditioned areas, and definition of minimum energy efficiency levels for buildings and equipments. Additional contribution of this research includes estimation of electricity use per square meter of building floor area, for the residential and commercial sectors in São Paulo municipality.

Diplomová práce se zabývá energetickým sektorem v Ruské Federaci se zaměřením na sektor budov a jejich energetickou efektivnost. Je zde vytvořen základní přehled předpi-sů a norem týkajících se sektoru budov a dotační programy vytvořené Ruskou vládou na snížení energetické náročnosti. V praktické části je provedeno energetické hodnocení dané budovy v podmínkách Čr a Ruské Federace. Výpočty energetických bilancí budovy jsou prováděny pro klimatické podmínky daných zemí a v souladu s národními předpisy. Na základě energetických bilancí jsou navrženy opatření na úsporu energie. V závěru je provedeno ekonomické posouzení, s ohledem na rozdílné ceny energií a nákladů na provedení návrhových opat-ření v České republice a Ruské Federaci.

Abstract Achieving the objective of a decarbonised economy by 2050 will require massive efforts in the energy sector. Emissions from residential houses will have to be almost completely cut, by around 90% by 2050. Home automation is a potential tool for achieving this goal. However, the environmental and economic benefits of automation technologies first need to be assessed. This thesis evaluates the impact of home automation for electricity management in the residential sector using environmental and economic indicators. To this end, a life cycle assessment was performed to evaluate the impacts of the manufacturing, use and disposal phases. The influences of end-user behaviour, household size and multiple levels of technological deployment were also investigated. A Markov chain simulation tool, built on the MatLab platform, was developed to assess all possible combinations of impacting factors. Dynamic environmental indicators were developed based on the ReCiPe method for aggregating the impacts of processes. All these indicators were then combined to form a single index based on multi-criteria acceptability analysis. The results suggest that home automation can decrease peak load, but that overall electricity consumption may increase due to electricity use by the actual automation system. The effect of home automation was more noticeable in larger households than in one-person households. In addition, use of dynamic environmental indicators proved more relevant than fixed indicators to represent the environmental impact of home automation. Within the life cycle of automation technology, the manufacturing phase had the highest impact, but most of the CO2 emissions originated from the use phase. In conclusion, the most important environmental benefit of home automation is reducing CO2 emissions during peak time by load shifting<br>Tiivistelmä Vähähiilisen talouden saavuttaminen vuoteen 2050 mennessä edellyttää valtavia ponnisteluja energia-alalla. Rakennuksista aiheutuvia päästöjä on vähennettävä radikaalisti, jopa 90 % vuoteen 2050 mennessä. Rakennusten energiatehokkuutta edistävä automaatiotekniikka on yksi keino tämän päämäärän saavuttamiseen. Kotiautomaation kautta voidaan sekä vähentää energian kokonaiskulutusta että tasoittaa energiankäyttöprofiilia. On kuitenkin tutkittava myös, mitkä ovat automaatiotekniikan ympäristö- ja taloudelliset vaikutukset. Tässä työssä käsitellään kotiautomaation vaikutusta sähkön kulutuksen hallintaan asuinrakennuksissa käyttämällä ympäristö- ja talousindikaattoreita. Tätä varten suoritettiin kotiautomaation elinkaariarviointi selvittämällä laitteiden valmistus-, käyttö- ja hävittämisvaiheiden ympäristövaikutukset. Työssä tarkasteltiin myös asukkaiden käyttäytymisen, kotitalouden koon ja eri teknologiavaihtoehtojen vaikutuksia ympäristö- ja talousvaikutuksiin. Arviointi suoritettiin Markovin ketjun simulointityökalulla, joka rakennettiin Matlab-alustalle. Dynaamisia ympäristömittareita kehitettiin ReCiPe-menetelmää käyttäen. Indikaattorit on edelleen yhdistetty yhdeksi indeksiksi käyttäen monikriteeriarviointia. Tulokset viittaavat siihen, että huippukuormitusta voidaan vähentää käyttämällä kotiautomaatiota, mutta sähkön kokonaiskulutus voi kasvaa automaatiojärjestelmän sähkönkulutuksen takia. Kotiautomaation vaikutukset ovat eniten havaittavissa suurissa kotitalouksissa. Lisäksi, dynaamiset indikaattorit edustavat paremmin kotiautomaation vaikutusta ympäristöön kuin staattiset indikaattorit. Automaatioteknologian elinkaaressa suurimmat ympäristövaikutukset ovat valmistusvaiheessa, mutta CO2-päästöjä syntyy eniten käyttövaiheessa. Lopuksi voidaan todeta, että kotiautomaation merkittävin ympäristöhyöty on CO2-päästöjen vähentäminen huippukulutuksen aikana siirtämällä kuormitusta toiseen ajankohtaan

The thesis work is part of a larger project financed by the European Bank for Reconstruction and Development (EBRD) and awarded by RINA Consulting S.p.A.. Azeri Retail will receive the loan from EBRD in order to refurbish its six new acquisitions in Baku, Azerbaijan. Azeri Retail considers the current Fresco format store a good technological and structural level, therefore Azeri Retail would like to replicate this state also for the new acquisitions. The thesis objective is to understand and analyse the current energy efficiency state and consequently propose some resource efficiency measures in order to replicate this new format for the new acquisitions to have a lower carbon footprint compared to the existing supermarkets belonging to the same brand. The thesis project is an energy audit comprising analysis of historical data, site visit to current Azeri Retail’s stores and consequent proposal of energy saving measures to be applied to the new acquisitions. In order to do this, three case studies have been developed: ATL, Project and REM. The first step has been the literature review about the energy utilization and carbon footprint of the retails sector, past energy audits, current and future policy framework in Azerbaijan. During this phase, it turned out that Azerbaijan doesn’t have a dedicated law for energy efficiency and therefore the construction phase doesn’t consider energy efficiency a primary target. Furthermore, in average the refrigerators represent the 40% of the total energy consumption of the supermarket. The site visit in Baku highlighted huge differences between the two brands’ buildings owned by Azeri Retail: Fresco brand belongs to high structural and technological level supermarkets, while Sebet doesn’t have any insulation on the envelope and the technical equipment is rather old. Microsoft Excel have been used in order to create the tool to perform the calculations. The thermal losses considered are the transmission losses, due to the building envelope, and the ventilation losses, due to the temperature difference between the exhaust indoor air and outdoor air. The internal gains are included in the model, in particular occupancy and solar loads. Furthermore, every case study considers different technical equipment according to what it is representing. All three built case studies refer to the geometry of the Fresco 2 building, since the comparison is more valuable if the buildings considered have similar geometry and activity inside. The ultimate aim of the modelling phase is to achieve good savings through measures in the REM case, since it is supposed to represent a useful list of saving measures to carry out during the actual refurbishment of the new stores. The measures proposed are: refurbishment of the envelope, purchase of a heat recovery heat exchanger, the exploitation of daylight through solar tubes and installation of LED bulbs, the refurbishment of cold rooms and the installation of double air curtains in the open refrigerated display cabinets. Great and positive results have been achieved during the modelling phase: ➢ Fresco stores can show very good structural properties and technological equipment and for this reason, each saving measures is additional to the already existing Fresco’s buildings status. ➢ Although Fresco stores’ buildings are better than Sebet stores’ ones and better than average practice in Azerbaijan, huge savings have been identified and this means that the new acquisitions could perform even better than the existing ones, mostly considering medium-low cost measures. The report closes with the overall comparison between the three case studies’ energy consumption and international benchmarks about food driven retails.

Thesis (MCom)--Stellenbosch University, 2015.<br>ENGLISH ABSTRACT: Worldwide, energy has been, and continues to be, key to economic development. However, the current global consensus is that energy-related carbon dioxide emissions would, at current rates, put the world onto a potentially catastrophic trajectory which could lead to global warming of 5 degree Celsius or more compared to pre-industrial times. There is a critical need for a low-carbon development or a move away from conventional fossil fuels energy sources. This study explores impacts of policies that South Africa developed in order to champion sustainable energy strategies based on energy efficiency and non-conventional energy sources, including renewable energy. The mining sector, because of its energy-intensive nature, was chosen. In order to achieve this objective three approaches were carried out: (i) a critical review of literature on energy efficiency (EE) and renewable energy (RE) ; (ii) two case-studies that demonstrate the impacts of the policies; and (iii) action research on a sample of mines using survey questionnaire and interviewing. The research results show that the need to have security in energy and the need to be competitive and grow revenue are significant in deciding to carry out EE and RE initiatives in the mining sector. The results also show that safety followed by production are the priorities and are accompanied by a range of other demands, such as cost reduction and legislative requirements. It is, therefore, within this context that EE and RE initiative will always be carried out in the mining sector. The research concludes that, under the current market framework, South African EE and RE policies are not as effective as hoped they would be. The research, therefore, recommends that a percentage of the mines’ revenue could be dedicated to EE and RE initiatives. In addition, South Africa needs to come up with a new type of productive endeavour that would lead to less extractive industries, including mines.<br>AFRIKAANSE OPSOMMING: Energie is, was en sal wereldwyd altyd die sleutel wees tot ekonomiese ontwikkeling. Nieteenstaande, word dit wereldwyd aanvaar dat die huidige energie opwekking se koolstofdioksied vrystelling moontlik kan lei tot aardverwarming van 5 grade Celsius of meer wanneer vergelyk met word met pre-industriële tye. Daar is ‘n kritiese behoefte aan lae koolstofdioksied vrystelling ontwikkelings of ‘n beperking van konvensionele fossielbrandstof energiebronne. Hierdie studie analiseer die impak van die Suid Afrikaanse beleid wat ontwikkel is om volhoubare energie te bevorder wat effektief en onkonvensioneel is, insluitend hernubare energie. Die mynsektor, as ‘n groot verbruiker van energie, vorm die kern van die studie. Die studie is voltooi in drie fases naamlik: (1) kritiese oorsig van die literatuur oor energiedoeltreffendheid (EE) en hernubare energie (RE); (2) twee gevallestudies wat die impak van die beleid bevestig; en (3) praktiese navorsing deur middel van vraelyste en persoonlike onderhoude met seker myne. Die navorsing bevestig dat die behoefte aan bestendige energie teen kompeterende pryse wat die mynsektor in staat stel om inkomste te groei ,‘n beduidende invloed het op die besluit om EE of RE inisiatiewe te onderneem. Die resultate bevestig verder dat beroepsveiligheid en produksie uitsette die eerste prioriteite vir die myne is. Dit word verder beinvloed deur kostebesparings en wetlike vereistes. Enige EE en RE inisiatiewe wat onderneem word sal in hierdie konteks plaasvind. Die navorsing kom tot die slotsom dat, onder huidige marktoestande, Suid Afrika se EE en RE beleid nie so effektief is as waarop daar gehoop is nie. Die navorsing beveel derhalwe aan dat ‘n persentasie van myne se inkomste geoormerk moet word vir EE en RE inisiatiewe. Verder meer , Suid Afrika moet strewe na tipes produksie wat minder natuurlike grondstowwe onttrek, insluitend die myne.

A technique is presented for estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual taxlot or parcel. The method combines annual building energy simulations for cityspecific prototypical buildings and commonly available geospatial data in a Geographical Information System (GIS) framework. Hourly results can be extracted for any day and exported as a raster output at spatial scales as fine as an individual parcel (

Modern civilization has developed principally through man's harnessing of forces. For centuries man had to rely on wind, water and animal force as principal sources of power. The advent of the industrial revolution, electrification and the development of new technologies led to the application of wood, coal, gas, petroleum, and uranium to fuel new industries, produce goods and means of transportation, and generate the electrical energy which has become such an integral part of our lives. The geometric growth in energy consumption, coupled with the world's unrestricted growth in population, has caused a disproportionate use of these limited natural resources. The resulting energy predicament could have serious consequences within the next half century unless we commit ourselves to the philosophy of effective energy conservation and management. National legislation, along with the initiative of private industry and growing interest in the private sector has played a major role in stimulating the adoption of energy-conserving laws, technologies, measures, and practices. It is a matter of serious concern in the United States, where ninety-five percent of the commercial and industrial facilities which will be standing in the year 2000 - many in need of retrofit - are currently in place. To conserve energy, it is crucial to first understand how a facility consumes energy, how its users' needs are met, and how all internal and external elements interrelate. To this purpose, the major thrust of this report will be to emphasize the need to develop an energy conservation plan that incorporates energy auditing and surveying techniques. Numerous energy-saving measures and practices will be presented ranging from simple no-cost opportunities to capital intensive investments.

Development and enhancements in Information and Communication Technologies (ICTs) is following a high level trend promising many opportunities to the economy, environment and society. Utilizing ICTs to enable improvements in the field of energy efficiency is becoming a very hot topic across the globe in this context. In this study both the enabling role of the ICTs for ensuring energy efficiency and the carbon footprint of ICTs considering also the rebound effects was analyzed as a case study for Turkish consumer electronics sector. Desktop research and in depth interviews with representatives of the sector, aimed at assessing current situation and trends in the field, provided a basis for a qualitative analysis. In our assessment main focus was put on the enabling role of ICT in achieving energy efficiency gains and<br>thus, we intend to explore whether utilization of ICTs can help improving energy efficiency in consumer electronics sector in Turkey. Results of the analysis showed that there is a limited inclusion of ICT directly enabling energy efficiency in the sector. Moreover, there is a lack of awareness on the concept of ICT for energy efficiency concept in the sector. Discussion of the results was followed by policy recommendations for the enabling role of ICTs for achieving energy efficiency targets in Turkey. We argue that, by increasing the awareness on the topics, utilizing the potential strength of R&amp<br>D capacities of the firms and deployment of links between the sector and global context on the ICT for energy efficiency, ICT can help improving energy efficiency in Turkish consumer electronics sector.

Includes abstract.<br>Includes bibliographical references (p. 90-93).<br>Energy efficiency will help South Africa meet some of its socioeconomic goals whilst protecting the environment and using resources effectively. In light of the recent blackouts, South Africa has stepped up its energy efficiency initiatives in order to delay the need for new generation capacity, but human behavioural responses often tend to offset the beneficial effects of such initiatives. Such behavioural changes are called the rebound effects. Energy modelling using LEAP was carried out for the South African residential electricity sector. The results from the LEAP modelling suggest that reducing residential electricity demand by 10% in 2030 will require high penetration rates of efficient appliances and in order to mitigate the rebound effect, efficiency initiatives should be carried out in conjunction with awareness campaigns and price interventions.

Global environmental degradation is one of the most serious threats facing humankind as a result of the expansion of its activities around the globe. Scientific evidence is growing that greenhouse gas emissions are having a noticeable effect on the earth's climate. Sustainable development has become a global issue and its life cycle influences the life cycles of the whole planet dramatically. As widely accepted, CO2 emissions are the most significant impact on global climate caused by the amount of energy consumed (Kyoto Protocol, 1997). The UK Government has signed the United Nations Framework Convention on Climate Change in 1992 and is therefore committed to reducing the emission of six greenhouse gases with carbon dioxide being the most significant to 12.5% lower than the 1990 levels (DEFRA, 2000). The Government has also indicated that it has an aim of further reducing the emissions with an eventual target of 20% below the 1990 levels by 20 10. Energy consumed by the UK building stock approaches 50% of the total while transport is responsible for 28% (DETR, 2000). Accordingly the energy used in housing stock is responsible for about 30% of overall emissions (Shorrock and Walters, 1998), which is a major contributor to global warming and therefore, improving energy efficiency and reducing carbon dioxide emission within housing stock is a key factor for long term sustainability in the built environment. This research aims to study the energy efficiency standards, CO2 emissions and energy ratings of privately rented, university controlled and approved properties within Sheffield. In general, properties in this particular sector account for about 15% of the total housing stock and demonstrate one of the worst conditions of housing standards in the UK (Revell and Leather, 2000). In this research however, properties analysed have shown better characteristics regarding energy efficiency standards especially when compared to the worst housing examples in the country. This is mainly due to properties being controlled and approved by the university standards/requirements, and resulted in achieving higher energy efficiency standards within the privately rented sector. Case study analysis carried out includes over 200 privately rented properties, showing dwelling conditions and examining efficiency of both water and space heating systems. iii Abstract As a global matter, environmental issues and good building design have also been increasingly important in the UK. For that reason, energy and environmental assessment methods for buildings have been developed in order to accomplish good building design, which could contribute considerably to reducing pollution and improving the environment. These assessment methods identify criteria for a range of issues also concerning the global, national and indoor environments. Due to the importance of building energy and environmental assessment methods, many components have to be discussed for the future of buildings and more emphasis should be paid to encouraging property developers to utilise the appropriate methods in order to design energy conscious buildings. Some of the existing methods concerning 'Environment and Healthy Building' developed and used in the country have been reviewed and discussed in the perspective of global effects. In this study, having chosen university-controlled properties would therefore help to utilise the university authority to take action effectively and play a key role in guiding energy efficiency improvements within privately rented properties. With university authority, potential improvements in these properties can be encouraged and implemented much effectively, whilst existing legislation and policies are inoperative to enforce retrospective energy standards in existing housing. Furthermore, this has a negative impact on private rented sector and comes into being a major barrier for this particular sector. Therefore, this is an opportunity that will not only increase energy standards of the housing stock in Sheffield, but also help to achieve the rate of improvement required by the Home Energy Conservation Act 1995 and reduce the overall energy consumption caused by the existing housing stock in the country.

Au Maroc, le secteur de l’énergie se caractérise par la faiblesse des ressources nationales en énergies fossiles et une forte dépendance des approvisionnements énergétiques du reste du monde. Parallèlement, la demande en énergie primaire connait ces deux dernières décennies une forte expansion qui devrait se prolonger dans le futur. Du coup, la maîtrise de la demande énergétique (MDE), à travers la mise en place du programme national de l’efficacité énergétique (PNEE) et son déploiement dans tous les secteurs économiques, constitue l’un des axes prioritaires de sa politique énergétique. Dans le secteur bâtiment, le PNEE porte sur la mise en place des instruments de politique publique visant à inciter les usagers à investir dans les solutions d’efficacité énergétique (EE) et dans les énergies renouvelables (EnR) et adopter un comportement de sobriété et de lutte contre le gaspillage.L’objectif de cette thèse est de procéder à l’évaluation de l’efficacité des instruments de la politique de MDE dans le secteur bâtiment. La démarche adoptée consiste à combiner les deux dimensions de l’évaluation ex-post de l’action publique : 1) la dimension normative pour apprécier l’efficacité des mesures mises en oeuvre ; 2) la dimension instrumentale qui vise à comprendre les résultats obtenus et à identifier les pistes d’amélioration. Il est question, en fait, de voir si les dispositifs d’ordre réglementaire et incitatif en application au Maroc permettent-ils de contourner toutes les barrières à l’investissement dans des actions de la MDE dans ce secteur. Il s’avère qu’il existe un déficit d’adoption des solutions d’EE et des EnR de la part des usagers et que les différents instruments mis en oeuvre ne peuvent suffire à le réduire. D’abord, certaines barrières ne sont pas levées car aucun outil approprié n’existe. Ensuite, certains facteurs de blocages ne sont que partiellement traités car l’utilisation pratique des outils diffèrent de leur conception théorique. Enfin, la politique de la MDE se trouve la plus part des temps contrariée par d’autres politiques publiques en matière de logement ou par l’incapacité des pouvoirs publics à mobiliser les différents intervenants dans l’acte de bâtir.Ce travail de recherche essaye de répondre à un certain nombre d’interrogations : la mise en place d’une politique de MDE est-elle justifiée au Maroc sachant que la consommation énergétique par habitant est très faible par rapport à la moyenne mondiale ? En quoi cette politique consiste-t-elle ? En quoi est-elle bénéfique pour le pays et pour les citoyens ? Quels sont les instruments économiques mis en oeuvre par les pouvoirs publics en vue d’inciter les usagers à maîtriser leur consommation énergétique et donc à atteindre les objectifs de réduction de la demande en énergie fixés ? Après plusieurs années de mise en oeuvre, quel bilan peut-on dresser au regard de ces objectifs ? Quelle évaluation d’impacts économique, social et environnemental peut-on faire ? Et quels sont les freins qui limitent l’action publique pour réduire la consommation énergétique dans le secteur bâtiment ?L’élaboration d’un programme de rénovation thermique massive des bâtiments publics est de nature à contribuer à l’atteinte des objectifs fixés par les pouvoirs publics en matière de maîtrise de la demande énergétique et de réduction des émissions de gaz à effet de serre. De par son importance et les effets d'entraînements positifs qu'il peut induire, le parc bâti des collectivités publiques représente un enjeu énergétique considérable. Il mérite, par3conséquent, de faire l'objet d'actions profondes en faveur de l'économie d'énergie. Le développement de ce programme répond également au devoir d’exemplarité dont les pouvoirs publics doivent faire preuve<br>In Morocco, the energy sector is characterized by the weakness of national resources in fossil fuels and a strong dependence on energy supplies from the rest of the world. At the same time, demand for primary energy has grown rapidly in the last two decades and is expected to continue in the future. As a result, controlling energy demand, through the implementation of the national energy efficiency program and its deployment in all economic sectors, is one of the priority areas of its energy policy. In the building sector (residential and tertiary), this program focuses on the implementation of public policy instruments aimed at encouraging users to invest in energy efficiency and renewable energy solutions and adopt a sober and fight against waste. The aim of this thesis is to assess the effectiveness of energy demand management policy instruments in the building sector. The approach adopted is to combine the two dimensions of the ex-post evaluation of public action: 1) the normative dimension to assess the effectiveness of the measures implemented; 2) the instrumental dimension, which aims to understand the results obtained and to identify areas for improvement.The question is, in fact, to see if the regulatory and incentive mechanisms applied in Morocco allow to circumvent all the barriers to investment in the actions of the control of the energy demand in the building sector. It turns out that there is a lack of adoption of energy efficiency solutions and renewable energy from users and that the various instruments implemented can not be enough to reduce it. First, some barriers are not lifted because no appropriate tool exists (the case of the thermal renovation of existing buildings). Then, some blocking factors are only partially addressed because the practical use of the tools differs from their theoretical design. Finally, the energy control policy is most of the time thwarted and neutralized by other public housing policies or the inability of public authorities to mobilize the various stakeholders in the act of building.This research work attempts to answer a number of questions: Is the implementation of a policy to control energy demand in Morocco justified given that per capita energy consumption is very low compared to the world average? What does this policy consist of? How does it benefit the country and its citizens? What are the economic instruments used by the public authorities to encourage users to control their energy consumption and thus to achieve the targets for reducing demand? After several years of implementation, what is the assessment of these objectives? What impact evaluation of these economic instruments can be done? Moreover, what are the barriers that limit public action to reduce energy consumption in the building sector?The development of a massive thermal renovation program for public buildings is likely to contribute to achieving the objectives set by the authorities in terms of controlling energy demand and reducing greenhouse gas emissions. Because of its importance and the effects of5positive training that it can induce, the public built park represents a considerable energy stake. It deserves, therefore, to be the object of deep actions in favor of saving energy. The development of this program also responds to the duty of exemplarity that the public authorities must demonstrate

In this paper, we propose an adaptive and multi-sector-based user clustering algorithm which increases energy efficiency in a cellular network. Adaptive sectoring with dynamically changing sector angles is illustrated with a number of randomly distributed mobile stations. Transmitted power is equally shared by sectors before adaptive user clustering. The sector angles vary from 30 to 360 degrees by merging neighboring sectors and a sector is switched off till the user density exceeds a threshold (Td). The Td value is computed from the total number of users that the cell can accommodate over the area of the cell. The sectors with less than Td density exhibits transmit power which approaches to zero or sleeping state and so that the cumulative power is saved. Simulation results show that an average of 45% to 50% energy can be saved in 10 iterations.

Mestrado em Sistemas Energéticos Sustentáveis<br>In view of the current global scenery, in which several nations are striving against global warming, energy efficiency rises as a cost-effective prospect. As the building sector accounts for over one-fifth of the total delivered energy consumed worldwide, it has great potential for implementing rationalization and energy efficiency measures. Service buildings are expected to have the highest growth in energy consumption when compared to residential buildings and are therefore the focus of this thesis. Energy reduction efforts for service buildings are vast; however, they are concentrated mostly on technological opportunities. Behaviour changes represent a great potential for reducing energy consumption without significant financial costs, but still, they are commonly disregarded. Hence, the present dissertation aims to propose a quantitative methodology to analyze occupants’ behaviours and their impact on energy consumption in service buildings. Results are acquired through the use of dynamic simulation, namely DesignBuilder software. Energy consumption due to behaviour is determined by simulating the occupant interactions with equipment, lighting and HVAC systems. To that end, three occupancy profiles were fixed: standard occupants’ interactions are defined by Decree-Law nº 79/2006; efficient occupants have extreme efficient behaviours leading to energy savings; inefficient ones lead to extreme energy waste. Dynamic simulation results give evidence of the occupancy impact on energy consumption. Efficient behaviours were able to reduce energy consumption by over 34%. However, regardless of the rigorousness of efficient behaviours, waste potential by inefficient occupants was always higher than saving potential. This result highlights the importance of understanding occupant behaviours and its accurate consideration of dynamic simulation tools.<br>No atual cenário mundial, no qual diversas nações lutam contra o aquecimento global, a eficiência energética se destaca como uma opção viável. O setor de edifícios é responsável pelo consumo de mais de um quinto da energia total gerada, e por isso possui grande potencial para a implementação de medidas de racionalização e eficiência energética. Espera-se que os edifícios de serviços tenham o maior crescimento no consumo de energia quando comparados aos edifícios residenciais, e, portanto, são o foco desta tese. As possibilidades de redução de energia para os edifícios de serviços são vastas; no entanto, estas se concentram principalmente em oportunidades tecnológicas. As mudanças de comportamento representam um grande potencial para reduzir o consumo de energia sem custos financeiros significativos, no entanto ainda são geralmente desconsiderados. Dessa forma, a presente dissertação visa propor uma metodologia quantitativa para análise dos comportamentos dos ocupantes e seu impacto no consumo de energia em edifícios de serviços. Os resultados foram adquiridos através do uso da simulação dinâmica de edifícios, pelo software DesignBuilder. O consumo de energia devido ao comportamento foi determinado pela simulação das interações entre os ocupantes e os equipamentos, sistema de iluminação e de aquecimento, ar condicionado e ventilação. Para este fim, foram considerados três perfis de ocupação: o ocupante de referência teve por base as definições do Decreto-Lei nº 79/2006; os ocupantes eficientes possuem comportamentos extremos e eficientes que levam a economias de energia; ocupantes ineficientes causam um desperdício extremo de energia. Resultados da simulação dinâmica evidenciam o impacto da ocupação no consumo de energia. Comportamentos eficientes . foram capazes de reduzir o consumo em mais de 34%. No entanto, independentemente do rigor dos comportamentos eficientes, o potencial de desperdício de energia pelos ocupantes ineficientes foi, em todos os casos, superior ao potencial de economia energética pelos ocupantes eficientes.Este resultado destaca a importância de compreender os comportamentos dos ocupantes e assegurar sua análise de forma precisa sobre as ferramentas de simulação dinâmica.

Following established traditions in anthropology and sociology, where cross-border research helps to identify important themes which benefit from comparative study, this dissertation introduces cross-sector policy research as a new methodology for generating useful insights about public policy. The cross-sector method is applied to the study of the UK energy and transport sectors. A range of generic policy developments in the energy sector are identified including: the development of efficiency indicators, scenario analysis, and the establishment of energy efficiency programmes. Such developments have not, as yet, occurred in the transport sector. A structural analogy between energy and transport is developed which is used to generate a range of innovations for transport policy including: gross mass movements and intensities as indicators of the efficiency with which the economy uses transport; the projection of a quantitative scenario of sustainable mobility; and the outline of a transport efficiency programme. The insights from the analogy are generalised to consider the benefits of a wider application of cross-sector policy research to other policy areas.

The residential sector in England is often identified as having the largest potential for emissions reduction at some of the lowest costs when compared against other sectors. In spite of this, decarbonisation within the residential sector has not materialised. This thesis explores the complexities of decarbonising the residential sector in England using a whole systems approach. It is only when the interaction between social, psychological, regulatory, technical, material and economic factors are considered together that the behaviour of the system emerges and the relationships between different system components can be explained giving insight into the underlying issues of decarbonisation. Building regulations, assessments and certification standards are critical for motivating and driving innovation towards decarbonising the building stock. Many existing building performance and evaluation tools are shown to be ineffective and confound different policy objectives. Not only is the existing UK SAP standard shown to be a poor predictor of dwelling level energy demand but it perversely incentivises households to increase CO2 emissions. At the dwelling level, a structural equation model is developed to quantify direct, indirect and total effects on residential energy demand. Interestingly, building efficiency is shown to have reciprocal causality with a household’s propensity to consume energy. That is, dwellings with high-energy efficiency consume less energy, but homes with a propensity to consume more energy are also more likely to have higher energy efficiency. Internal dwelling temperature is one of the most important parameters for explaining residential energy demand over a heterogeneous building stock. Yet bottom up energy demand models inadequately incorporate internal temperature as a function of human behaviour. A panel model is developed to predict daily mean internal temperatures from individual dwellings. In this model, socio-demographic, behavioural, physical and environmental variables are combined to estimate the daily fluctuations of mean internal temperature demand. The internal temperature prediction model is then incorporated in a bottom-up engineering simulation model. The residential energy demand model is then used to project decarbonisation scenarios to 2050. Under the assumption of consistent energy demand fuel share allocation, modelling results suggest that emissions from the residential sector can be reduced from 125 MtCO2 to 44 MtCO2 after all major energy efficiency measures have been applied, the power sector is decarbonised and all newly constructed dwellings are zero carbon. Meeting future climate change targets will thus not only require extensive energy efficiency upgrades to all existing dwellings but also the complete decarbonisation of end use energy demand. Such a challenge can only be met through the transformation of existing building regulations, models that properly allow for the effects of human behaviour, and flexible policies capable of maximising impact from a heterogeneous residential building stock.

The ‘energy efficiency paradox’ poses a significant challenge to the UK Government on three fronts – behavioural failures, agency problems and affordability – inasmuch as failing to address these issues in the residential sector will crucially hinder the nation’s ability to fight against climate change and fuel poverty. This proposition is explored in a three-paper series. The first paper investigates the decision-making process leading residential consumers to adopt district-heating technology, a greener alternative to individual heating systems, contained within a specially designed quasi-experimental survey of 784 households. Exploiting the random variation in prices, the paper utilises an ordered probit model to estimate the discount rate implied by the consumers’ preferences. Nesting the neo-classical approach within a behavioural framework, the paper sheds new light on the prevalence of the energy efficiency paradox. The second paper explores the split-incentives in heterogeneous landlord-tenant arrangements, which may produce a sub-optimal level of energy efficiency in privately rented housing, from an objective and subjective perspective. The analysis is conducted using Ordinary Least Squares regression, applied to a nationally representative sample of households and housing stock. A pseudo-panel analysis with a fractional response is executed to investigate problems of endogeneity. Using the English Housing Survey, the final paper brings together two leading indicators of relative poverty to identify three dimensions of fuel poverty: income-poverty-high-cost, housing-induced-poverty-high-cost and fuel-induced-poverty-high-cost. In doing so an alternative empirical strategy is proposed, utilising a multinomial logit model that helps identify the households most in need of support from energy efficiency schemes. This thesis reveals that a largescale deployment of energy efficient technologies will be hampered if policy does not 1) target consumer inattention and heuristic decision making, 2) promote insulation in the private rented sector, while combatting landlords taking advantage of inattention and vulnerability and 3) adopt a more flexible fuel poverty framework that can pinpoint the socio-economic characteristics of those most in need as we move towards a low-carbon, distributed energy market.

Housing sectors have particular significance and impact on resource use, deployment and sustainability. Given this, they are inextricably enmeshed in a raft of conjoined issues, ranging from energy, production and consumption, through to effective governance structures and leveraged sustainable transformations. However, the real challenges facing the Housing sectors rest with the supportive societal structures which underpin the operationalisation of these issues. This includes such factors as consultation and engagement, and the identification of critical drivers and proven solutions – which are tangible barriers for sustainable transformations (particularly in the English housing system). This research presents a conceptual model – STRIDES (Strategic Tri-level Relational Interventions for Delivering Energy efficiency and Sustainability), which purposefully addresses the aforementioned barriers, and critically challenges thinking and engagement. STRIDES explicitly captures 5-INs, which embodies interrelated essential conditions needed for successful transformation. This conceptual model was developed using a mixed-method approach, engaging constructivism/interpretivism to guide the development and augmentation of this (to ensure maximum relevance and impact). The English housing system was used as the primary lens – which helped both shape and inform the research methodological approach. STRIDES was developed through: an online survey questionnaire (for systems-knowledge); Delphi questionnaires (for target-knowledge); and focus group discussions (for transformative-knowledge). The theoretical constructs and methods revealed exclusive hidden dialogue of composite correlated multi-perspective stakeholders, which highlighted tri-level influences on interdependent system-components for effective governance of sustainable transformations. Recognising and prioritising relationally responsive emerging strategies arising from STRIDES help stakeholders appreciate subtle nuances and forces across and beyond contexts. This helps positioning, especially to shape/tailor strategic interventions to deliver meaningful objectives of these sustainable transformations.

This thesis is an investigation of why and how homeowners decide to renovate their homes. Energy efficient renovations are of particular interest given their potential contribution to public policy goals including greenhouse gas emission reduction. Policies seeking to improve energy efficiency in existing homes have to influence homeowners’ decisions. This requires a psychologically and behaviourally realistic understanding of the renovation decision process. Different research traditions offer competing models. These are tested through a series of hypotheses on the form and content of the renovation decision. The empirical dataset used combines both stated and revealed preference data. 809 homeowners in British Columbia were surveyed at three different cross-sections of the renovation decision process. The sample included both energy efficient (e.g., windows, insulation) and amenity renovators (e.g., kitchens, bathrooms), and was broadly representative of the population of renovating homeowners in British Columbia. Survey responses were calibrated using actual energy consumption data, and a supplementary survey of realtors. Calibration allowed homeowners’ expectations of the financial costs and benefits of renovating to be evaluated. Firstly, sampled homeowners systematically over-estimated their energy costs. Secondly, these estimates were subject to common information processing and recall biases. Thirdly, even homeowners in the middle of energy efficient renovations had expectations of capital costs, energy cost savings, and property value impacts that were largely unknown or unreliable. More generally, sampled homeowners lacked the basic knowledge necessary to appraise energy efficient renovations as financial investments. Homeowners’ motivations for renovating were more likely to be emotional and aesthetic in the case of amenities, but related to functional outcomes like thermal comfort in the case of energy efficiency. Social norms were influential in both cases but were underreported by homeowners. This was consistent with rationalisation biases which help individuals maintain self-esteem by emphasizing instrumental explanations for their actions. This psychologically realistic characterisation of the renovation decision suggests a range of design criteria for policy, and questions the effectiveness of narrowly-targeted information and incentive policies in their current form. However, policy implications should be generalised with caution given the low energy price and appreciating real estate market characteristics of the study region.

Decarbonization of the power sector is of great importance for the transition to a sustainable and low-carbon world economy. Estimating carbon efficiency in the power sector is a key step to grasp the impact of demand-side usage changes and evaluate their potential environmental benefits. In order to quantify the environmental benefits of demand-side usage changes, Average Emission Factor (AEF) and Marginal Emission Factor (MEF) have been proposed in the electrical power sector. AEF is defined as the ratio of the total CO2 emitted in the system to the total electricity generated. It is an effective factor for reporting on CO2 emissions at system level and on an average basis, but the current AEF model lacks clarity on the factors actually affecting the estimation. MEF is defined as the incremental change in carbon emissions as a result of a change in demand. However, previous MEF assessments did not consider key technical limitations, such as ramp-rate constraint for generators and network constraints, and carbon trading mechanisms. This thesis improves the estimation for both AEF and MEF and key achievements can be summarized as: 1). A novel model of estimating AEF, with its application to GB, US and China’s electricity system. 2). Improvement on conventional MEF model by considering ramp-rate constraint in dispatch order. 3). Sensitivity studies on MEF using current fuel prices and future fuel prices. 4). A new model of estimating MEF considering both the utilization level of generators and the carbon costs when determining the dispatch order. 5). The effect of power network on MEF estimation, with a comparison of congested scenarios and non-congested scenario.

The UK Government has set an ambitious legislative goal of reducing greenhouse gas emissions by 80 % by 2050. Of the total energy used in the UK, 31 % is used in the domestic sector. In the domestic sector energy is used for space and hot water heating, lighting, appliances and cooking. Space and hot water heating make up 82 % of the total energy used in the UK domestic sector. Almost all of the energy used in the UK domestic sector originates from depletable resources. In order for the UK to reach its goal of decreasing greenhouse gas emissions by 80 % by 2050, the way energy is used in the UK domestic sector needs to change dramatically. The aim of this study is to identify opportunities for homeowners to be more sustainable without compromising their standard of living, by changing the way they use and supply energy. Homeowners’ ways of using and supplying energy today will be reviewed followed by an identification of measures that can be taken to create a more sustainable home from an energy perspective. Identified measures not only include usage of small-scale energy technologies but also application of energy efficiency measures and changes in behaviour that result in homeowners using energy in a more efficient way.   The aim has been achieved by conducting a literature review, collecting statistical data regarding energy use from the Department of Energy and Climate Change and the undertaking of a case study. The literature review revealed that air source and solar assisted heat pumps, solar photovoltaic (solar PV) and fuel cell micro combined heat and power (fuel cell mCHP) are the most promising and widely available microgeneration technologies on the market today. LED light bulbs, wall and loft insulation and energy efficient appliances are the energy efficiency measures identified as having the highest potential to decrease the amount of energy used. The literature review also proved that behaviour in relation to energy use is a key area to address in order to make homeowners use energy in a more efficient way.   The case study consisted of six case houses, based on the most common house types in the UK. The reference heating system used in the case study was a gas boiler connected to a central heating system of the house. 80 % of the homes in the UK are heated with a gas boiler and that is why it was chosen as a reference scenario. The case study showed that all of the microgeneration technologies use resources and energy in a more efficient way than the reference scenario. But despite the financial support of governmental subsidies none of the microgeneration technologies were financially viable options compared to a gas boiler. Energy efficiency measures, especially LED lighting, wall and loft insulation, significantly lowered the amount of energy used, they lowered the influence on greenhouse gas emissions and were financially viable options without the support of governmental subsidies.   It was identified that microgeneration technologies are impacted by behaviour and that they can enable demand-side management, especially as the number of supply-driven sources such as wind and solar PV increases.   In summation microgeneration technologies and energy efficiency measures have a large potential to help make homeowners become more sustainable from an energy perspective. Governmental support has a determining role in making them financially viable and therefore accessible to the public.

In the international context, this research analyzes the state of the art of scientific discussion, the action exerted by national and local governments through regulations, and the opinion of professionals in the field of construction of buildings in relation to the implementation of energy efficiency measures in buildings. In general, the interest in the different areas has been driven primarily by: 1) the worldwide increased energy consumption in buildings, emphasizes by an increasingly urbanized world and the resource scarcity for power generation, primarily fossil fuels; 2) the increase in greenhouse gas emissions related to the buildings' construction and operation; and 3) the thermal behaviour of the building's envelope, which determines the energy demand for thermal conditioning; mainly for heating in winter and cooling in summer. The foregoing has resulted in the implementation of different types of energy efficiency measures in the building sector around the world. On the one hand, through mandatory measures, driven by national and local governments through building codes; mandatory measures require that when building a new building or refurbishing an existing one, the architects, private developers, or builders must comply with building standards that govern the thermal performance of the different elements of the buildings' thermal envelope. On the other hand, by implementing voluntary measures, such as international certification systems, established by non-governmental institutions, aimed at legitimizing the efforts of building owners, design teams, and builders to design, build, and operate buildings in an environmentally friendly way. The latter has triggered an international trend and an increasing demand for certification of the so-called "green buildings". Such independent certification systems seek to reduce the environmental impact of activities in the construction sector. In the Chilean context, this research analyzes the relationship between two main pillars of the Chilean economy, the energy sector and the private housing sector. Particularly, this research focuses on the implementation of energy efficiency measures in the private housing market in Santiago, the Chilean capital. From the energy perspective, the high vulnerability for power generation by the dependence on the provision of gas from neighbouring countries and periods of drought affecting hydroelectric power generation, has led to the Chilean government intervention. Government intervention is centred on two main lines of action: 1) the diversification of the country's energy matrix, through the implementation of alternative systems for power generation based on non-conventional renewable energy sources; and 2) the implementation of energy efficiency measures. In the construction sector, the latter is expressed by the entry into force of the New Thermal Regulations for new residential buildings in three stages in the building code since 2000. With the implementation of new regulations in the construction sector in the Chilean context and the growing demand for green building in the international context, private real estate companies and construction companies, which are the backbone of the construction sector in Chile, have reacted by offering energy efficient real estate products in Santiago de Chile. Based on the foregoing, arises the main question leading this doctoral thesis: How do real estate developers apply energy efficiency in their housing offer in Santiago de Chile? The main research question is further refined by three sub questions: 1) who are the real estate developers that are adopting energy efficiency and why? This is a compound question, first it seeks to identify real estate companies adopting energy efficiency measures in Santiago de Chile’s private housing market; then it looks into the motivations for doing so; 2) what types of energy efficiency measures are real estate companies adopting? This sub-research question seeks to identify the adopted residential energy efficiency strategies; and 3) which barriers to further implementation of energy efficiency exist? It seeks to identify the setbacks found by energy efficiency adopters in the implementation process, in order to understand local issues in the adoption process. The Case Study and Selection of Sub-Cases for the Analysis The research focuses on the voluntary implementation of residential energy efficiency measures in the private housing market; moreover, it analyzes the case of Santiago de Chile. Therefore, the focus is set on real estate companies that offer energy efficient housing in their offer for real estate products in the metropolitan region. The selection of embedded sub-cases for the analysis, or sub-cases, was made by applying a criterion sampling strategy known as purposive sampling. For this, a thorough review of 568 private real estate companies' websites, offering different real estate products in the Metropolitan Region of Santiago de Chile between June and July 2011, was performed. Out of this group, a set of 45 companies that offering energy efficient homes mentioned were selected. Later on, personal interviews mainly with general managers of real estate development companies and other actors considered key informants because of their knowledge in the field, such as scholars, representatives from public institutions, other public and private research centres, and practitioners, were conducted between April and May 2012. Main Methods and Data Analysis Research is conducted under a qualitative approach, as it focuses primarily on the opinion of real estate companies’ CEOs and other key informants considered information rich when helping answering the research questions. The main tool for data analysis was the thematic content analysis. Main Findings The main results of this research are structured on the basis of the answering the secondary research questions or sub-questions. Who are the real estate developers that are adopting energy efficiency and why? As it was mentioned above, the first part of this compound sub-question seeks to identify the real estate companies that are implementing residential energy efficiency measures in their offer in the housing market in Santiago de Chile. A set of 45 real estate companies were identified because they mentioned to be applying some sort of energy efficiency measures. This was a rather small group since, at that time, 568 real estate companies were offering housing products. Based on the empirical findings, a categorization of real estate companies following the Roger’s model was conducted. Thus, real estate companies were categorized depending on when they began adopting residential energy efficiency measures in their housing offer. The three stages of the New Thermal Regulation issued for the housing sector in Chile were selected as time-milestones for defining the adopter categories. Accordingly, three main categories emerged following Roger’s model. 1) Innovators, includes real estate companies who adopted energy efficiency measures for the first time before the entry into force of the first stage of the NRT in 2000; 2) Early Adopters, groups real estate companies who adopted residential energy efficiency measures for the first time between the first and second stage of the New Thermal Regulation, that is to say between 2001 and 2007; and 3) Early Majority, includes real estate companies who began to apply residential energy efficiency measures starting in 2008, meaning after the second stage of New Thermal Regulation came into force. The empirical evidence suggests that the adoption process of energy efficiency measures has started following the normal development described by Rogers' innovation curve. Therefore, it is expected that the rest of the real estate developers operating in the private housing market in Santiago de Chile will eventually follow the Innovators, Early Adopters, and Early Majority categories. This is mainly due to the recent introduction of thermal regulation by the government and because the housing market is a highly competitive market, in which none of the players can risk to be left behind. The second part of the sub-research question, and probably the most important one, seeks to understand the motivations for real estate companies to offer and implement energy-efficient real estate products in Santiago de Chile’s private housing market. This research identifies the motivations of real estate development companies in the opinion of their managers collected in personal semi-structured interviews conducted during fieldwork. Based on the thematic analysis of the abovementioned interviews, four categories of motivations for offering and applying energy efficiency were identified based on the company managers’ opinion. These categories, in order of preference are: 1) Market Differentiation Strategies (Competitiveness and Trending); 2) Company Policies (Client-Oriented Policies, Innovation Policies, and Environmentally-friendly Policies); 3) Resource efficiency (Reduction of Household\'s Expenses and Concerns for Energy Scarcity); and 4) Government Incentive Schemes (Subsidies to the Use of Renewable Energy). Briefly, the main motivations for adopting energy efficiency measures in the private housing offer are related to marketing strategies. In general, real estate companies operating in Santiago de Chile are looking to distinguish themselves from their competitors by offering energy-efficient housing products. This is mainly because real estate companies are following a trend that is driven by several factors such as: local energy shortage periods, the international influence of green buildings in the real estate market, and the growing demand for international certifications in the Chilean context. What types of energy efficiency measures are real estate companies adopting? As mentioned earlier, this research identifies real estate companies offering energy-efficient housing in the private real estate market of Santiago de Chile who implemented a diversity of energy efficiency strategies in their housing supply, as the empirical evidence shows. Although the motivations for implementing energy efficiency measures are diverse (as described previously), energy efficiency measures are mainly implemented in order to reach a comfort temperature inside the dwelling, making all possible efforts to ensure that energy is used efficiently. In the case of the residential buildings, this means looking for the optimal use of energy for space heating or cooling, lighting, hot sanitary water, and ventilation. In general, depending on whether there is the need to make an additional energy effort in order to achieve optimum indoor comfort conditions, the energy efficiency measures implemented in the private housing sector in Santiago de Chile can be grouped into two main categories of energy efficiency strategies: passive design strategies and active design strategies. On the one hand, passive design strategies refer to what real estate developers are doing to reduce the energy consumption of their housing buildings. Such strategies include: 1) improving the overall thermal performance of the building envelope; 2) the use of renewable energy, mainly solar thermal and photovoltaic technology, for hot sanitary water and energy conversion respectively; and 3) bioclimatic design and construction principles. As it was mentioned in Section 6.1, a basic characteristic of passive design strategies, distinguishing them from active design strategies, is that in order to operate they rely on the building site and the inherited thermal properties of the building materials used in the different housing building typologies. On the other hand, active design strategies refer to the technological innovations implemented in order to maintain an optimal indoor thermal conditioning and to reduce the energy used in the different buildings’ systems; namely, 1) illumination systems; 2) heating systems; 3) centralized control systems; and 4) air conditioning systems. In general, real estate developers adopted active design strategies as a complement to the use of passive design strategies. Not surprisingly, real estate developers have mentioned the improvement of the thermal envelope as the most commonly used residential energy efficiency strategy. This results from the fact that internationally and in Chile, regulations in the housing sector were implemented in order to improve the thermal behaviour of dwellings, and therefore, their energy efficiency. Finally, a third type of energy efficiency strategy adopted by real estate developers in Santiago de Chile is the result of a public-private partnership between the Chilean Government and the Chilectra, the local electricity utility. The initiative is called “Chilectra – Full Electric Buildings” and it offers an optional electrical energy tariff for residential consumers. This strategy is further explained in Section 6.3. Which barriers to further implementation of energy efficiency exist? Based on the opinion of the various key stakeholder involved in this research, this research shows that most barriers to energy efficiency in the private housing sector in Santiago de Chile interact and strengthen each other. The classification of barriers to further implementation of energy efficiency is not straightforward. Nonetheless, in the opinion of real estate companies’ managers, the barriers to adopting energy efficiency measures in the private housing market in Santiago de Chile revolve around the specific characteristics of the local social system. These barriers are: 1) market barriers; 2) organizational barriers; 3) institutional barriers; and 4) behavioural barriers. In relation to the categorization of energy efficiency adopters identified in the first sub-question, the empirical evidence seems to indicate that, not all the barriers play the same role for all adopter categories. In general, market barriers are most relevant to the innovators group. Although most of the real estate developers mentioned that even today the local market and the local construction industry are not ready to provide adequate support (both in the availability of products and services) for further development of the market for energy efficient construction, the deficiency was greater 20 years ago, when the innovators first started to implement residential energy efficiency measures in the private housing sector. Moreover, the other barriers encountered (namely organizational and institutional barriers) are transversal to the adopter categories. This seems to drawn from the organizational and institutional characteristics of the context in which private real estate companies operate. The context remains constant over time and their internal relationships are also maintained, homogeneously affecting all adopter categories. Finally, barriers related to end users and/or clients’ behaviour are mainly listed by early majority adopters, which comprises developers who implement residential energy efficiency measures recently (after 2000). Apparently, this results mainly from the fact that end user are lacking information about the benefits (general and local) to be gained from implementing residential energy efficiency measures.

Climate change is an issue that has to be addressed since human activities cause significant environmental effects. Energy consumption in transportation, industry, commercial and residential buildings and agriculture are responsible for climate change and environmental effects. The main factor in reducing energy consumption and emissions is an appropriate energy policy framework that would be applied in each sector. Buildings are responsible for substantial energy consumption not only because several fuels are used in order to cover their energy requirements, but also because every building has its own various energy services and operations. The main focus of this research is the Greek hotel sector and its contribution to the country's efforts to meet the specified energy targets. In order for the country to meet these targets, it is essential to examine the effectiveness of the existing energy policy framework on this sector. Thus, the main aim of this project is to evaluate the existing national energy measures in the Greek hotel sector, by simultaneously identifying further options and alternatives for policy improvements. The methodology integrates the use of energy scenario development in the medium term and the owners' views in applying the proposed energy measures to their facilities. The data analysis focuses on the development of three energy scenarios that describe three different possible environments for a selected sample of Greek hotels. The findings of this research indicate that the existing energy measures could be very effective for Greek hotels, since significant reductions in final energy use could occur. In addition, the consideration of other hotels' practices could improve the existing measurements and provide further insights to both policymakers and end-users.

Reducing energy demand and carbon emissions from the UK housing stock through efficiency improvements is the focus of policy interest. The 2008 UK Climate Change Act set legally binding targets of an 80% reduction in greenhouse gas emissions against a 1990 baseline. The majority of emissions in the residential sector are carbon dioxide emissions arising from energy used for heating homes and water, cooking, lighting and electrical appliances. The sector s contribution to total UK emissions is significant and therefore reducing energy use in homes is an important factor if the UK is to meet its targets. In this research an initial survey of studies of the residential sector has been conducted to review factors considered to influence energy use and related emissions in UK housing. Further review identified energy and climate change policy instruments and structural change in the energy supply sector between 1970 and the present. A subsequent time-line of policy and events describes the changing, historical policy landscape related to energy efficiency improvements in the sector. As a result of these reviews, a need to better understand how householders have responded to technical energy efficiency improvements in housing, and the influence of social and economic factors, was identified as a research gap. In order to model householders historical behaviour Data Envelopment Analysis (DEA) was identified as an innovative approach for this field of research as a potential means to measure sector efficiency in a new way. The analysis has two stages. In the first, DEA is used to measure the relative efficiency with which the UK housing sector has managed its energy use and related emissions to deliver energy services such as space heating and lighting to householders. In the second stage, multiple regressions are used to examine whether the variability over time in the efficiency measure can be explained by policy interventions, energy market developments, and economic and social factors. DEA is a method for modelling the relative performance efficiency with which an observed sample converts measurable inputs to quantitative outputs. In this research, samples consist of annual observations of the UK housing stock, using data largely taken from DECC s UK housing energy fact file. An efficiency frontier of performance enveloping the observed sample points as closely as possible is constructed through DEA mathematical programming. The core of the analysis lies in identifying relevant quantitative input and output measures from available data. A range of measures of comfort and energy service levels to represent energy service outputs, and household energy and emissions data to represent inputs are examined in the analysis. The result is a timeline of efficiency performance that can be related to socio-economic change and the history of policy interventions. The analysis shows that the efficiency of the UK housing stock to manage its energy use and related emissions has not followed the steady upward trend that might have been expected from technical innovation. There is evidence of rebound effects over time, with householders behaviour in response to technical efficiency improvements acting to raise comfort levels rather than lower energy usage. Nevertheless, statistically significant roles can be identified for factors such as income, price and tenure which have implications for policy design and control and lead to a number of policy recommendations.

Within the UK, energy efficiency improvements within the existing housing stock is a key area in which governments have attempted to increase rates of activity to boost carbon reduction and end user cost savings. The most recent UK policy, the Green Deal, was a pay as you save scheme, linking the capital cost of improvements to ongoing energy bill payments. The success of this policy was limited, with minimal uptake in comparison to expectations. This research investigates the viewpoints of retrofit industry practitioners, to assess their experiences of working under the Green Deal, and evaluate what pathways could be available to move forward into the future. UK and German based individuals interviews were used to compare experiences, along with UK group interviews and focus groups to develop findings via a grounded theory approach, to illuminate possible future strategies for UK retrofit. Key findings suggest EERS expansion is most successful if policies are designed more holistically; UK policies show strategies which focus on simply the property and not the occupants have their disadvantages. Therefore, a move away from marginal financial incentives, such as the Green Deal's loan structure, to a wider consideration of how policy tools interact with supply chains and end users, would enable increased impact. Precise strategies identified to achieve this include; EERS sector members providing an attractive investment prospect to customers external to any government subsidy, linking of energy efficiency improvements with more standard property upgrades, and an increase in training levels to increase professionalism.

The European Union faces challenges related to climate change, security of energy supply, and competitiveness of European industries. Energy efficiency indicators are required for monitoring and controlling the effectiveness of policies such as the recently endorsed Energy Efficiency Directive. This thesis aims at assessing whether traditionally used energy efficiency indicators capture the development of energy efficiency in the iron and steel sector. The study is based on results from two statistical methods: a top-down, i.e. Malmquist productivity index, and a bottom-up, i.e. partial least squares regression. The specific energy consumption (the indicator representing the sector within the Odyssee energy efficiency index) was scrutinised together with associated indicators based on economic production using the aforementioned statistical methods. The results demonstrated the specific energy consumption does not capture the characteristics of the value chain of steel products. Therefore, it is not sufficient for capturing the energy efficiency of iron and steel industries. Previous studies suggest using indicators based on economic production (e.g. value added) since they represent the value chain to larger degree. However, the value creation process of companies belonging to larger international groups cannot be estimated reliably. Furthermore, the trends of both types of indicators tend to be highly influenced by structural changes, veiling the actual efficiency development. Energy use statistics published by international organisations were also compared for the Swedish case. The results demonstrated that international organisations use different methodologies for allocating energy use statistics between consumption and transformation sectors. The method has significant implications on the trends observed, if based on openly available statistics. This thesis complements previous research by reviewing implications of traditional energy efficiency indicators based on company data, national statistics or openly available statistics and contributes with insights essential for future efforts towards improving energy efficiency indicators for the steel industry.<br>Den europeiska unionen står inför utmaningar relaterade till minskad klimatpåverkan, säkerställd energitillgång samt konkurrenskraften hos europeisk industri. Energieffektiviseringsindikatorer krävs för att övervaka och kontrollera effektiviteten hos energipolicy såsom det nyligen antagna energieffektiviseringsdirektivet. Den här avhandlingen syftar till att bedöma om traditionellt använda energieffektiviserings-indikatorer fångar järn- och stålsektorns utveckling inom energi-effektivitet. Studien är baserad på resultat från två statistiska metoder: en top-down-metod, Malmquists produktivitetsindex, och en bottom-up-metod, partiella minsta kvadratmetoden. Den specifika energikonsumtionen – indikatorn som representerar sektorn i Odyssees energieffektiviseringsindex – granskades tillsammans med andra energieffektivitetsindikatorer med hjälp av de ovan nämnda statistiska metoderna. Resultaten visade att specifik energikonsumtion inte fångar karaktären av stålprodukternas värdekedjor. Indikatorn är därför inte tillräcklig för att fånga energieffektivitet inom järn- och stål-industrier. Tidigare studier föreslår att använda indikatorer baserade på ekonomisk produktion (exempelvis förädlingsvärdet) då de representerar värdekedjan till högre grad. Förädlingsvärdet kan dock inte uppskattas tillförlitligt för företag som tillhör större internationella grupper. Trend-erna hos båda typerna av indikatorer tenderar dessutom att påverkas av strukturella förändringar, vilka döljer den riktiga effektivitetsutvecklingen. En jämförelse gjordes även av energianvändningsstatistik publicerad av olika internationella organisationer för det svenska fallet. Resultaten demonstrerade att internationella organisationer använder olika metoder för att allokera energianvändning mellan konsumtions- och omvandlings-sektorer i statistiken. Metoden påverkar observerade trender signifikant om de baseras på öppet tillgänglig statistik. Avhandlingen kompletterar tidigare forskning genom att belysa innebörden av traditionella energieffektiviseringsindikatorer baserade på företagsdata, nationell statistik eller öppet tillgänglig statistik samt bidrar med insikter som kommer att vara väsentliga för framtida satsningar i att förbättra energieffektiviseringsindikatorer för stålindustrin.

Doutoramento em Economia<br>Neste trabalho, através de uma meta-análise, pretende-se integrar os resultados obtidos nos estudos sobre a eficiência, realizados no sector energético, e analisar se as decisões metodológicas influenciam os valores de eficiência estimados. Os dados são constituídos por 162 modelos reportados em 63 artigos científicos que analisaram empiricamente o nível de eficiência no sector energético no período de 1979 a 2013. Através de um modelo de meta- regressão, a investigação focaliza-se em tentar perceber que efeitos podem ter as diferentes especificações dos modelos nos valores estimados para a eficiência. Analisa-se o impacto que as variáveis - revista no qual o estudo é publicado, ano de publicação, método paramétrico versus não paramétrico, tipo de função, forma funcional aplicada, orientação input versus output, distribuição do erro, efeitos aleatórios versus efeitos fixos, dimensão da amostra, tipo de dados, ano a que se referem os dados e número de variáveis output incluídas - podem ter no nível de eficiência estimado para as unidades de produção e distribuição energética. Os resultados parecem demonstrar que o ano de publicação do artigo, opção pela função custo, a forma funcional translog, a distribuição semi-normal para o termo de erro, dados de painel e o número de variáveis output têm um impacto negativo no cálculo da estimativa da eficiência. Por outro lado, a opção pelo modelo de efeitos aleatórios tem um impacto positivo. Relativamente à média dos anos de observação e dimensão da amostra, os resultados demonstram que não existe qualquer efeito relevante. Existe evidência estatística, a um nível de significância de 5%, para afirmar que as variáveis Energy Economics journal, modelos paramétricos, orientação input e rendimentos variáveis à escala produzem efeito positivo na estimativa da eficiência. Por último, o modelo especificado neste trabalho e os resultados obtidos permitem acomodar outras variáveis que tenham como objectivo o aprofundamento e futuros desenvolvimentos deste trabalho.<br>In this paper, through a meta-analysis, we intend to integrate the results obtained in studies conducted on the efficiency in the energy sector and try to understand if indeed the methodological decisions influence the efficiency values estimated. The data consist of 162 models reported in 63 scientific articles that empirically analyzed the level of efficiency in the energy sector from 1979 to 2013. Through a meta-regression model, the research focuses on trying to understand what effects may have the different specifications of the models in the estimated values for efficiency. We analyze the impact of variables - journal in which the study is published, year of publication, parametric versus nonparametric method, type of function, functional form applied, input versus output orientation, error distribution, random effects versus fixed effects, sample size, data type, the year to which they relate data and number of output variables - can have on the estimated level of efficiency for units of energy production and distribution. The results demonstrate that the year of publication of the article, the option cost function, the translog functional form, the half-normal distribution for the error term, panel data and the number of output variables have a negative impact on the calculation of the estimate value of efficiency. Moreover, the choice of the random effects model has a positive impact. For the average of years of observation and sample size, the results demonstrate that there is no significant effect. There is statistical evidence, a 5% significance level, for asserting that the variables Journal Energy Economics, parametric method, input orientation and variables returns to scale produce positive effect on the estimation of efficiency. Finally the model specified in this study and the results indicate the possibility of integrating other variables that aim to deepen this work and future developments of this work are indicated.

Cette thèse de doctorat cherche à mieux comprendre certaines caractéristiques du marché de la performance énergétique des bâtiments dans le secteur résidentiel et à évaluer l'efficacité de trois interventions publiques visant à encourager la rénovation énergétique : Diagnostic de performance énergétique (DPE), crédit d'impôt pour le développement durable (CIDD) et taxation de l'énergie. Le premier chapitre de la thèse passe en revue la littérature sur la certification de la performance énergétique des bâtiments et conclut que les ménages la valorisent lorsqu'ils achètent ou louent un logement. Le deuxième chapitre présente une analyse théorique de l'impact du DPE et démontre que le DPE peut réduire ou augmenter la consommation d'énergie en fonction de l'horizon temporel et de l'hétérogénéité de la demande d'énergie dans la population. Le troisième chapitre développe une simulation basée sur le modèle susmentionné et suggère que le DPE doit être combiné avec d'autres interventions publiques pour être efficace. S'appuyant sur des données de panel françaises, le quatrième chapitre analyse économétriquement l'impact d'une augmentation du CIDD et montre qu’elle stimule significativement les dépenses pour les investissements éligibles. Le dernier chapitre analyse économétriquement comment les prix de l'énergie influent sur les décisions des ménages en rénovation énergétique et ne trouve pas de preuve statistique de l'effet d'une hausse des prix de l’énergie<br>This PhD dissertation aims at better understanding some features of the market for building energy performance in the residential sector and at evaluating the effectiveness of three policy interventions to encourage energy retrofit: Energy Performance Certificates (EPCs), tax credit for energy retrofit, and energy taxation. The first chapter of the thesis surveys the literature on building energy performance certification: there is strong evidence that households value building energy performance when buying or renting a dwelling. The second chapter provides a theoretical analysis of the impact of EPCs and shows that EPCs can decrease or increase energy consumption depending on the time horizon and the heterogeneity of energy demand in the population. The third chapter develops a simulation based on the aforementioned model and suggests that EPCs need to be supplemented by other policy instruments to reduce energy consumption. Relying on French micro-panel data, the fourth chapter econometrically analyzes the impact of a tax credit rate increase for energy retrofit and finds that it can substantially boost expenditures for investments targeted by the tax credit. The last chapter econometrically analyzes how energy prices affect households’ decisions to invest in building energy performance and does not find any statistical evidence of an effect of an increase in energy fuel price

Orientador: Luiz Antonio Rossi<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica<br>Made available in DSpace on 2018-08-17T20:55:25Z (GMT). No. of bitstreams: 1 Barros_RegianeSilvade_M.pdf: 4809578 bytes, checksum: 3c66513eb6c044f7320b1bc7da1bcdb9 (MD5) Previous issue date: 2011<br>Resumo: Durante boa parte de 2001 e o início de 2002, o Brasil enfrentou a crise do abastecimento de energia elétrica. Dada a necessidade de assegurar o abastecimento de energia, torna-se vantajoso investir em eficiência energética. Com tais medidas são postergados investimentos no setor elétrico, principalmente, sob a ótica da oferta, quando, a construção de novas usinas é minimizada e, conseqüentemente, os investimentos nos sistemas de transmissão. Especificamente no setor industrial, a eficiência energética tem importância fundamental, uma vez que, o setor é responsável por boa parte da demanda de energia do País, portanto, estudos sobre o consumo de eletricidade nesse segmento são importantes. Sendo assim, objetivando alcançar melhores resultados, nesse setor, quanto ao uso da energia elétrica, ressalta-se a importância da caracterização de seu uso. E em consonância, de uma análise mais detalhada das principais grandezas relativas à energia elétrica nas instalações industriais, pode-se apontar melhores práticas que levem ao uso eficiente desse insumo. Neste trabalho, especificamente, foram analisadas três empresas do segmento metalúrgico no Estado de São Paulo, quanto ao perfil do uso da energia elétrica. Analisaram-se as principais variáveis de energia elétrica (fator de carga, fator de potência, consumo de energia e demanda), bem como os indicadores de consumo específico e intensidade elétrica. Por meio das análises, notou-se que cabem medidas de uso racional de energia elétrica nessas empresas quanto à melhoria do fator de carga e modulação de carga, que, por sua vez, podem levar à melhores indicadores de consumo específico e intensidade energética<br>Abstract: During good part of 2001 and the beginning of 2002, Brazil faced the supplying crisis of electric energy. Given the necessity to assure the energy supply, it becomes advantageous to invest in energy efficiency. With such measures, investments in the electric sector are postponed, mainly under the optics of offer, when, the construction of new plants are minimized and, consequently the investments in transmission systems. Specifically in the industrial sector, the energy efficiency is very important, once, this sector is responsible for good part of energy demand in the country; therefore, studies related to the electric energy consumption in this sector are important. Being thus, objectifying itself to reach better results, in this segment, regarding the use of electric energy, the characterization of its use is necessary. A more detailed analysis of the main quantities related to electric energy at industrial plants, may point out the best practices that lead to a more efficient use of this input. In this work, specifically, three metallurgical companies in the State of Sao Paulo were evaluated, regarding the profile of the use of electric power. The main parameters of electric energy were examined (load factor, power factor, energy consumption and demand), as well as, the indicators of specific consumption and energy intensity. Based on this analysis it was noted that some measures of rational use of energy can be applied in these companies, such as, the improvement of load factor and load modulation that can lead best pointers of specific consumption and energy intensity<br>Mestrado<br>Engenharia Mecanica<br>Mestre em Planejamento de Sistemas Energéticos

Thesis (MPhil)--Stellenbosch University, 2012.<br>ENGLISH ABSTRACT: South Africa faces an energy crisis which presents itself in two forms; electricity generation dominated by coal fired power stations and current electricity supply capacity being unable to meet growth in demand. South Africa urgently requires new generation capacity: however, power stations take time to plan, construct and commission, meaning that South Africa has to consider other options to meet electricity demand. This necessitates quick and innovative ways of meeting future demand. Energy efficiency has been identified as “a low hanging fruit” on the energy tree to address supply constraints and reduce energy related greenhouse gas emissions. There are various energy efficiency programmes aimed at raising awareness of measures that households can take to reduce energy consumption. Some of South Africa’s key objectives of energy efficiency in the residential sector are to mitigate the effect of peak demand on power capacity and to introduce state of the art technologies. In terms of these technologies, there is an overlap between energy efficiency and renewable energy. The widespread installation of renewable energy technologies such as SWHs has the potential to delay the need to construct new power stations. SWHs are a viable renewable energy option for South Africa. It is a mature and proven technology with the potential to address South Africa’s electricity capacity problems. Not only does a SWH provide financial savings to the customer in the long run but it offers the additional benefit of a reduction in greenhouse gas emissions to society. Although awareness of the benefits of solar water heaters is increasing, SWH uptake remains low. However the uptake is increasing due to; a SWH rebate offered through Eskom, electricity price increases which are forcing consumers to seek alternatives and a national building code requiring energy efficient water heating in new buildings which is expected to come into effect in 2012. Liquid Petroleum Gas is a low carbon emitting source of fuel for cooking. In South Africa, middle–high income households rely on the electric stove for cooking. Cooking contributes to electricity peak demand. Reducing electricity demand by replacing the electric stove would help in reducing electricity peak demand from the grid. LPG use has been increasing due to the following reasons; electricity supply shortages, shifting government policy on LPG and increasing electricity tariffs forcing lifestyle changes. This case study sought to investigate the opportunities, as well as the barriers for a Stellenbosch municipality - initiated energy efficiency programme. In terms of energy supply and demand management, the municipality has identified energy efficiency and the introduction of renewable energy sources as options for achieving sustainability. One of the barriers facing energy efficient technologies is up-front costs in the case of SWHs and the cost of appropriate equipment such as gas stoves in the case LPG. The study sought to investigate financial mechanisms that the municipality could use to overcome these barriers and promote the use of SWH and gas stove in the residential sector. Data was collected through a combination of a mini Delphi – expert opinion technique, questionnaires, secondary data analysis, telephone and personal interviews with solar water heater industry stakeholders, LPG industry stakeholders and municipal officials. The conclusion drawn from this research is that Stellenbosch Municipality can initiate its own energy efficiency programme instead of waiting for national government. Although the municipality can initiate an energy efficiency programme, it needs to find another institution to fund the programme. Funding mechanisms however do overcome the barrier of high up -front costs and high gas equipment costs making energy efficient technologies affordable.<br>AFRIKAANSE OPSOMMING: Suid-Afrika staan voor ʼn energiekrisis wat op twee maniere gestalte kry: elektrisiteitsopwekking wat oorheers word deur steenkoolkragstasies en huidige elektrisiteitsvoorsieningsvermoë wat nie in die groeiende aanvraag kan voorsien nie. Suid-Afrika benodig dringend nuwe kragontwikkelingsvermoë. Dit neem egter tyd om kragstasies te beplan, op te rig en in diens te stel, wat beteken dat Suid-Afrika ander opsies moet oorweeg om in elektrisiteitsaanvraag te voorsien. Dit noodsaak vinnige en innoverende maniere om in toekomstige aanvraag te voorsien. Energierendement is as “ʼn laaghangende vrug” op die energieboom geïdentifiseer ten einde beperkings in kragvoorsiening die hoof te bied en kweekhuisgasuitlatings wat met energie verband hou te verminder. Daar is verskeie energiebesparingsprogramme wat ten doel het om die bewustheid te versterk van maatreëls wat huishoudings kan volg om energieverbruik te verminder. Van Suid-Afrika se vernaamste doelstellings ten opsigte van energierendement in die residensiële sektor is om die uitwerking van spitsaanvraag op kragvermoë te verlig en om die jongste tegnologie in te voer. Ingevolge hierdie tegnologieë is daar ʼn oorvleueling tussen energierendement en hernubare energie. Die algemene installering van hernubare energietegnologieë, soos sonkragwaterverwarming (SWV), het die potensiaal om die noodsaaklikheid van die oprigting van nuwe kragstasies uit te stel. SWV is ʼn lewensvatbare nuwe energieopsie vir Suid-Afrika. Dit is ʼn ontwikkelde en bewese tegnologie met die potensiaal om Suid-Afrika se probleme ten opsigte van elektrisiteitsvermoë die hoof te bied. SWV sorg nie slegs vir die kliënt vir finansiële besparing op die lang duur nie, maar dit bied ook vir die samelewing die bykomende voordeel van ʼn afname in kweekhuisgasuitlatings. Alhoewel die bewustheid van die voordele van sonkragwaterverwarming toeneem, bly die gebruik van SWV laag. Die gebruik is egter besig om toe te neem vanweë ʼn SWV-korting wat deur Eskom aangebied word, elektrisiteitsprysverhogings wat verbruikers dwing om alternatiewe te soek, en ʼn nasionale boureglement wat energiedoeltreffende waterverwarming in nuwe geboue vereis en wat na verwagting in 2012 in werking sal tree. Vloeibare petroleumgas is ʼn brandstofbron wat vir kook gebruik word en wat ʼn lae koolstofvrystelling het. In Suid-Afrika gebruik huishoudings met ʼn middelhoë inkomste die elektriese stoof om te kook. Kook dra by tot elektrisiteitspitsaanvraag. Die vermindering in elektrisiteitsaanvraag deur die vervanging van die elektriese stoof kan help om die elektrisiteitspitsaanvraag op die netwerk te verlaag. Die gebruik van VPG het toegeneem weens die volgende redes: elektrisiteitsvoorsieningstekorte, veranderende regeringsbeleid ten opsigte van VPG en die verhoging in elektrisiteitstariewe wat veranderinge in lewenstyl afdwing. Hierdie gevallestudie het gepoog om die geleenthede, sowel as die hindernisse vir ʼn energierendementprogram wat deur Stellenbosch Munisipaliteit geïnisieer is, te ondersoek. Ten opsigte van energievoorsiening en -aanvraagbestuur het die munisipaliteit energierendement geïdentifiseer en die ingebruikneming van hernubare-energiebronne as opsies om volhoubaarheid te bereik. Een van die hindernisse waarvoor energierenderende tegnologieë te staan kom, is voorkostes in die geval van SWV en die koste van toepaslike toerusting soos gasstowe in die geval VPG. Die studie het ondersoek ingestel na die finansiële meganismes wat die munisipaliteit sou kon gebruik om hierdie hindernisse te bowe te kom en die gebruik van SWV en gasstowe in die residensiële sektor te bevorder. Data is ingevorder deur middel van ʼn kombinasie van ʼn mini-Delphi – kennermeningtegniek, vraelyste, sekondêre data-ontleding, telefoon- en persoonlike onderhoude met belanghebbendes in die sonkragwaterverwarmingsbedryf, belanghebbendes in die VPG-bedryf en munisipale amptenare. Die gevolgtrekking wat uit hierdie navorsing gemaak word, is dat Stellenbosch Munisipaliteit sy eie energierendementprogram kan inisieer in plaas daarvan om vir nasionale regering te wag. Alhoewel die munisipaliteit ʼn energierendementprogram kan inisieer, moet dit ʼn ander instelling kry om die program te befonds. Befondsingsmeganismes oorkom egter die struikelblok van hoë voorkostes en hoë kostes van gastoerusting wat energierenderende tegnologieë bekostigbaar maak.

As questões ambientais, o aquecimento global e a escassez dos recursos naturais são temas cada vez mais relevantes nesse início de século XXI. No Brasil também está em discussão a necessidade da melhoria dos gastos públicos e maior eficiência do Estado. A gestão de energia pode ser um vetor nessas frentes, contribuindo ao mesmo tempo para redução de impactos ambientais, melhor aproveitamento dos recursos e reduzindo o dispêndio de gastos públicos com energia. A proposta deste trabalho é apresentar o Sistema Público de Gestão de Energia (SPGE) visando incrementar a eficiência energética em instituições públicas brasileiras. O SPGE tem como base o Modelo de Excelência em Gestão Pública (MEGP), um modelo de gestão moderno, conceitualmente adaptado ao setor público do Brasil. Valendo-se também do conhecimento adquirido pelo Programa Permanente para o Uso de Energia na Universidade São Paulo (PURE-USP), que pratica a gestão de energia na USP desde 1997, este trabalho também aplica o SPGE para sugerir melhorias ao programa uspiano. Conclui que a gestão de energia deve ser praticada pelo setor público brasileiro, e que os conceitos de eficiência energética devem ser divulgados ao cidadão até o ponto que ele tenha condições de requerer a gestão de energia em todas as instituições públicas que faça uso.<br>Environmental issues, global warming and scarcity of natural resources are themes even more relevant at the beginning of 21th century. In Brazil, it is also in discussion the need of improving public spending and bigger efficiency of the country. Energy management can be a vector in these fronts, at the same time contributing to reduce environmental impacts, better use of resources and reducing the waste of public spending with energy. The purpose of this paper is to present the Public System Power Management (known as SPGE) aiming increasing the energy efficiency in Brazilian public institutions. This System (SPGE) is based on the Model of Excellence in Public Management (known as MEGP), a model of modern management, conceptually adapted to Brazils public sector. Also taking advantage from the knowledge obtained by the Permanent Program to the Use of Energy from University of São Paulo (known as PURE-USP), that has exercised the energy management in USP since 1997, this paper also applies SPGE to suggest improves to USP program. It concludes that power management must be used by Brazilian public sector and the concept of energy efficiency has to be disseminated to the citizens up to the point where they are able to require the power management in all public institutions used by them.

The future energy supply is highly likely to be a mix of central and decentralised energy sources, therefore knowledge of on-site generation, such as photovoltaic systems, and energy consumption patterns with a good degree of certainty will be necessary to ensure the current quality of supply that we enjoy at present from non-renewable resources. This thesis describes the outcome of a detailed electric energy monitoring campaign on 5 different sites in a total number of 81 households predominantly undertaken in the social housing sector in the United Kingdom. The 5 minute data (and 1 minute short term) have been derived during the Department of Trade and Industry Photovoltaic Domestic Field Trial Program, where over a period of two years electric energy consumption by the households and electric energy generation by their photovoltaic systems were monitored by the author as part of this study. The consumption data obtained underwent a detailed analysis in order to give an understanding of the characteristics of the electric load in terms of base load, peak load, the load fluctuation and the energy consumption. The measured electric load profiles were separated into weekday and weekend profiles, and summer and winter profiles were also derived. The results are presented as overall load profiles for the entire set of dwellings as site specific load profiles and, for a smaller number of dwellings, as dwelling specific load profiles. Another outcome of this research is the development of several publicly available measured annual data sets suitable for use in modelling (5 minute interval data). The findings of this energy consumption analysis and the long term real data sets can be used for computer modelling purposes in general, but particular in the field of on-site generation, where the need for available realistic data sets is immense. In order to create a link between the energy consumption characteristics and socio-economic factors an occupant survey was undertaken among the people living in the monitored dwellings. The survey included questions regarding the following aspects: the number of tenants living in the household, tenant's age, ownership of electrical appliances and the general times of use of appliances and occupancy in the household. The results of this survey, carried out in 46 dwellings, can be applied to improve electric load models in general and especially the parts of the models that present the social housing sector. The findings will also help to investigate the options of load shifting, based on the time of use analysis of the 17 appliances. This study has investigated the options of reducing the electric load in the domestic sector by building integrated PV-systems. Therefore the influence of simulated PV-generation profiles on the recorded electric load profiles was analysed. The outcome can help to size PV-systems when the direct use of the PV-energy in order to reduce losses in the public grid is desired. The findings of this study are also of use when knowledge is required on the electric demand of small networks when connected to a large PV-generator as opposed to the connection of one dwelling to one small PV-system. The results can be used to size storage systems (e.g. batteries) if a self sustaining schedule of dwellings is needed. The findings of this study were used in the International Energy Agency Energy Conservation in Buildings and Community Systems Annex 42 to provide the profiles needed for modeling the performance of Fuel Cells and Cogeneration systems in residential properties.

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics<br>For a long period, energy has been seen as an invisible good. In the users' mind, choices and costs related to energy are not connected. However, for consumers to change their behavior these two may be connected and consumers should become aware of the consequences of their actions and motivated to adjust them. Through the development of Smart meters, the next generation of gas and electricity meters which offer a range of intelligent functions and provide consumers with more accurate information, Galp Energia created Smart Galp - a revolutionary service that allows the consumer to control, monitor and influence the energy consumption of his household and automobile. This work project studies the best strategy to implement and potentiate Smart Galp value proposition in the Portuguese Market. The objective is to launch the service in the market. Thus, after all the internal and external analysis, it was defined the business model and the competitive strategy. A risk assessment and recommendations were conducted in order to achieve a successful implementation.

Submitted by Haroudo Xavier Filho (haroudo.xavierfo@ufpe.br) on 2016-03-01T13:26:46Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) TESE DOUTORADO luiz filipe alves cordeiro.pdf: 3367412 bytes, checksum: bb375206b64e3d1952028cf594d8c86e (MD5)<br>Made available in DSpace on 2016-03-01T13:26:46Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) TESE DOUTORADO luiz filipe alves cordeiro.pdf: 3367412 bytes, checksum: bb375206b64e3d1952028cf594d8c86e (MD5) Previous issue date: 2015-08-20<br>O presente estudo, objetiva analisar o atual planejamento do sistema elétrico brasileiro e apontar propostas que visam diversificar a matriz energética brasileira, trazendo como benefícios um sistema robusto que proporcione a redução gradual dos custos de geração, confiabilidade no fornecimento pela tecnologia adequada e por está mais próximo dos centros de carga e por fim, a redução dos impactos ambientais através da redução das emissões de Gases de Efeito Estufa (GEE). Esse trabalho procura avaliar os potenciais do sistema elétrico e propor ações mitigadoras tanto no consumo de energia elétrica com o auxílio das redes neurais artificiais como na geração com a proposta de possibilitar ao Operador Nacional do Sistema (ONS) a otimização do planejamento minimizando CO2.<br>The present study aims to analyze the current planning of the Brazilian electrical system and point proposals to diversify the Brazilian energy matrix, bringing benefits as a robust system that provides a gradual reduction of generation costs, reliability of supply by appropriate technology and is more near the load centers and finally the reduction of environmental impacts by reducing emissions of Greenhouse Gases (GHGs). This study evaluates the potential of the electric system and propose mitigating actions in power consumption based in artificial neural networks and help to the generation with the proposal to enable the ONS (National Electric System Operator) to optimize the planning minimizing CO2.

This case study intends to understand and identify perceived barriers and drivers within the housing sector in Östergötland. By deeper understanding of the pre-existing conditions and the perceived barriers and drivers that both limit and enable development, the thesis contributes to the existing literature with extended knowledge. Previous literature within the field along with interviews make up the empirical material analysed in a qualitative exploratory way. This study finds that the importance of different barriers and drivers can vary depending on location and owner-category as well as culture and socio-economic factors. This means that policy and design of drivers also have to be customized accordingly with the different target groups. One can, based on this thesis also conclude that energy and climate development in the housing sector is a slow process that takes time. Regardless the measure or action, nothing changes overnight. This case study has on a regional level begun to identify decisive conditions, barriers and drivers as well as differences within Östergötland, pointing out the direction for future studies and for future policy and action plans.

O estudo visa investigar os impactos do abastecimento por águas subterrâneas no setor energético brasileiro, as dinâmicas das tomadas de decisões no gerenciamento hídrico e gerenciamento energético brasileiro, e apontar onde as ações para a sustentabilidade no bombeamento de águas subterrâneas devem ser tomadas. A geração, consumo e gestão de energia interagem de muitas formas com os recursos hídricos, contudo o gerenciamento das águas superficiais difere do gerenciamento das águas subterrâneas. Cerca de 2,6% do consumo energético brasileiro é utilizado para abastecimento por águas subterrâneas. Ações para eficiência energética neste setor podem trazer economia de energia.<br>The study aims to investigate the impacts of groundwater supply in the Brazilian energy sector, the dynamics of decision making in water management and Brazilian energy management, and to point out where actions for sustainability in pumping groundwater must be taken. Power generation, consumption and management interact in many ways with water resources, yet surface water management differs from groundwater management. About 2.6% of Brazilian energy consumption is used for groundwater supply. Actions for energy efficiency in this sector can bring energy savings.

Au cœur de cette thèse réside l'application des méthodes d'optimisation et d'études empiriques pour traiter des questions de développement durable dans le secteur de l'électricité du Vietnam pour les 30 prochaines années. On examine les moyens des options énergétiques durables pour le secteur de l'électricité. La thèse s'organise en deux parties. (i) Dans la première partie, nous développons le modèle " bottom-up " de planification intégrée des ressources (IRP) pour fournir une évaluation plus exhaustive de l'état actuel et des perspectives d'avenir pour le secteur de l'électricité du Vietnam dans les trois prochaines décennies. Puis, en utilisant une analyse comparative et une analyse de la vulnérabilité qui est basée sur la simulation IRP, nous analysons les vulnérabilités auxquelles le développement du secteur devra faire face, en termes de dimensions économiques et socio-environnementales. Nous avons en outre développé le modèle IRP, représentant les coûts marginaux de réduction des émissions de carbone de manière réaliste en tenant compte des valeurs non nulles de carbone et de limitation des émissions de carbone, afin de simuler des options d'approvisionnement énergétique soutenables pour le secteur de l'énergie. (ii) Dans la deuxième partie, nous étudions les principaux obstacles contre une adoption plus large des énergies soutenables à l'aide d'enquêtes formelles parmi les experts nationaux. Ensuite, nous utilisons une approche d'analyse empirique pour examiner les différents outils politiques appropriés, y compris des instruments d'incitation / régimes et la réforme du secteur pour une telle durabilité du secteur de l'énergie. Pour la fin, nous analysons l'accès aux sources de financement possibles pour le développement durable dans le secteur de l'électricité du Vietnam.

This thesis deals with the EU energy policy and its impact on the energy sector of the Czech Republic. The main objective is to analyze the implemantation and impact of the EU climate-energy package on the czech energy sector. The first part is devoted to describing the current state of the energy sector in the country.The second part is the theory of externalities due to the fact that carbon dioxid emissions are externalities, which the EU is trying tu reduce through its climate-energy measures. The third part delas with EU energy policy and the fourth one with its applications and implications in the Czech Republic.

Sweden has the goal of reaching a fossil independent transportation sector by 2030. Two ways to reach the goal is to increase the use of electric vehicles or produce more biofuels. Both alternatives could be powered by forest residue, which is an underutilized resource in the country. Electricity could be produced in a biomass fired Combined Heat and Power (CHP) plant, and biofuel could be produced in a biorefinery through gasification of biomass and Fischer-Tropsch process. When located in Stockholm County, both system can also distribute heat to the district heating system. It is however important to use the biomass in an energy-efficient way. The scope of this work has been to analyze the efficiency together with environmental and economic aspects of the two systems.  To assess the efficiency and environmental impact of the two systems a forest to wheel study was made of the systems where the product was studied from harvesting of forest residue to driving the vehicle. The studied functional units were: kilometers driven by vehicle, kWh of district heating, CO2-equivalents of greenhouse gases and MWh of forest residue. The system using CHP technology and electric vehicles outperformed the biorefinery system on the two first functional units. Using the same amount of forest residue more than twice as much district heating and almost twice as many driven kilometers were produced in this system. The study also showed that both systems avoids significant greenhouse gas emissions and can be part of the solution to decrease emissions from road transportation.  The profitability of investing in a CHP plant or a biorefinery was calculated through the net present value method. It showed that the expected energy prices are too low for the investments to be profitable. The CHP plant investment has a net present value of -1.6 billion SEK and the biorefinery investment has a net present value of -4.6 billion SEK. Furthermore, the biorefinery investment entails higher risk due to the high investment cost and uncommercialized technology. Both systems face barriers for implementation, these barriers have been studied qualitatively.<br>Sverige har som mål att skapa en fossiloberoende fordonsflotta till år 2030. Två vägar som pekats ut för att nå målet är att öka användningen av eldrivna fordon eller att producera mer biobränsle. Båda alternativen kan drivas av skogsavfall, en råvara som det finns gott om i Sverige. Elektricitet kan produceras av skogsavfallet i ett kraftvärmeverk, och biobränsle i ett bioraffinaderi genom användning av förgasning och Fischer-Tropschmetoden. I Stockholms län skulle båda systemen dessutom kunna producera värme till Stockholms fjärrvärmesystem. Det är dock viktigt att använda skogsavfallet på ett resurseffektivt sätt. Därför undersöker detta arbete effektiviteten av de två olika systemen tillsammans med en analys av växthusgasutsläpp och ekonomiska förutsättningar.  För att kunna utvärdera effektiviteten och klimatpåverkan av de två olika systemen utfördes en ”skog-till-hjul”-analys där produkten undersöktes från ursprunget, till drivandet av ett fordon. För att utföra studien definierades fyra funktionella enheter. De funktionella enheterna var: körsträcka med bil mätt i kilometer, kWh fjärrvärmeproduktion, CO2 ekvivalenter av växthusgasutsläpp och MWh skogsavfall. Studien visade att systemet där skogsavfallet används i ett kraftvärmeverk för att producera elektricitet och ladda elbilar hade bättre resultat i de två första funktionella enheterna. Systemet producerade nästan dubbelt så lång körsträcka och mer än dubbelt så mycket fjärrvärme som systemet där skogsavfallet används i ett bioraffinaderi och biobränslet används i dieselbilar. Studien visade även att båda system kan bidra till att sänka växthusgasutsläppen från transportsektorn.  Lönsamheten att investera i ett kraftvärmeverk eller bioraffinaderi beräknades med nuvärdesmetoden. Studien visade att de förväntade framtida energipriserna är för låga för att investeringarna ska bli lönsamma. Kraftvärmeanläggningen hade ett nuvärde på -1.6 miljarder kronor, och bioraffinaderiet ett nuvärde på -4.6 miljarder kronor. Dessutom ansågs investeringen i ett bioraffinaderi vara en hög risk på grund av den höga investeringskostnaden och att tekniken idag inte är kommersialiserad. Det finns även en rad andra barriär för att genomföra de två olika systemen, dessa barriärer har studerats kvalitativt i arbetet.

Este trabalho descreve o desenvolvimento e caracterização de uma máquina elétrica para aplicação em sistemas de tração automotiva. Compreende o estudo e a análise do perfil de carga e das grandezas eletromagnéticas e eletromecânicas através da construção de modelos analíticos, numéricos e experimentais. Através destes, são propostos critérios para o dimensionamento geométrico e para a escolha dos materiais. A topologia da máquina elétrica possui fluxo axial no entreferro, duplo rotor com ímãs permanentes setoriais, núcleo estator toroidal sem ranhuras e enrolamentos setoriais. Os modelos analíticos tridimensionais para a geometria e o volume dos enrolamentos são uma contribuição relevante em termos científicos. Experimentalmente, a máquina é acionada como gerador síncrono, com um rendimento interno de até 91,75%. Como gerador em regime de frenagem regenerativa obteve-se um rendimento interno de 78,61% no barramento CC. Ao final, utilizando o modelo automotivo de perdas, é feita uma análise em regime permanente do sistema acoplado, visando à caracterização da eficiência energética global do sistema. Os resultados obtidos permitem uma avaliação adequada da máquina no modo de operação proposto.<br>Este trabalho descreve o desenvolvimento e caracterização de uma máquina elétrica para aplicação em sistemas de tração automotiva. Compreende o estudo e a análise do perfil de carga e das grandezas eletromagnéticas e eletromecânicas através da construção de modelos analíticos, numéricos e experimentais. Através destes, são propostos critérios para o dimensionamento geométrico e para a escolha dos materiais. A topologia da máquina elétrica possui fluxo axial no entreferro, duplo rotor com ímãs permanentes setoriais, núcleo estator toroidal sem ranhuras e enrolamentos setoriais. Os modelos analíticos tridimensionais para a geometria e o volume dos enrolamentos são uma contribuição relevante em termos científicos. Experimentalmente, a máquina é acionada como gerador síncrono, com um rendimento interno de até 91,75%. Como gerador em regime de frenagem regenerativa obteve-se um rendimento interno de 78,61% no barramento CC. Ao final, utilizando o modelo automotivo de perdas, é feita uma análise em regime permanente do sistema acoplado, visando à caracterização da eficiência energética global do sistema. Os resultados obtidos permitem uma avaliação adequada da máquina no modo de operação proposto.

Deux fois plus de bien-être en consommant deux fois moins de ressources : visant à l'origine des objectifs d'efficience des modes de production, le concept de " facteur 4 " s'est peu à peu modifié au début du XXIème siècle pour se focaliser sur la division par 4 des émissions de gaz à effet de serre. De nos jours, le facteur 4 est un objectif fractal, faisant référence selon l'échelle étudiée à deux ensembles différents mais reliés : le facteur 4 climatique (à l'échelle nationale) et le facteur 4 énergétique (à l'échelle micro-économique). Le facteur 4 énergétique, transposition des questions climatiques (GES) aux aspects de maîtrise de l'énergie a largement été développé au sein d'un secteur économique : le bâtiment. Ce dernier, de par son gisement d'économies d'énergie, a fait l'objet d'un engouement important s'étant concrétisé par la mise en place de réglementations, labels et scénarios prospectifs dans le but d'orienter et de proposer des directions vers l'atteinte du facteur 4. Malgré tout, la transposition pratique d'objectifs théoriques se heurte à la complexité du système composant ce secteur. Cette complexité est due à la diversité du bâti mais aussi, et surtout, aux nombreux acteurs qu'il est nécessaire de mobiliser. L'enjeu de cette recherche est d'étudier le système complexe que représente le secteur du bâtiment et ses acteurs, face à l'atteinte du Facteur 4. Cette thèse propose notamment d'identifier les points de blocage, ainsi que les facteurs de succès lors d'opérations de rénovation et de construction ; objectif revenant à poser la question suivante : quels sont les freins et leviers d'action rencontrés par les acteurs pour l'atteinte du facteur 4 dans le bâtiment ? Pour ce faire, nous avons choisi d'étudier en détail le cas du département de la Loire et envisagé par la suite la transposition des enseignements tirés sur ce département à l'ensemble de la France. Une vingtaine d'entretiens couplés à un questionnaire semi-directif auprès de plus de 200 acteurs professionnels du bâtiment ont été réalisés. Ces enquêtes qualitatives et quantitatives ont permis d'identifier et classer 24 types de freins, relevant de problématiques financières, techniques, réglementaires et comportementales ainsi que les principaux leviers pouvant permettre de les contourner. Au travers des discours et résultats obtenus, les contraintes financières et comportementales apparaissent prépondérantes pour les acteurs interrogés. Malgré tout, l'enchevêtrement des freins et l'interrelation de ces derniers entre catégories imposent une conclusion : le système actuel, face aux contraintes du facteur 4, nécessite non pas une adaptation voire une évolution mais une refonte des modes de penser et de faire. Cette refonte, prônant les concepts de sobriété et d'efficacité, nécessite d'ordonnancer ces derniers : la sobriété de conception constitue alors une étape préalable à l'efficacité énergétique, elle-même précurseur de la sobriété d'utilisation. Une recherche-action menée sur 3 projets de rénovation sur le territoire de Saint-Etienne Métropole et couplant plus d'une centaine d'entretiens auprès de locataires de logement sociaux confirme cet agencement. Les utilisateurs, acteurs incontournables d'un projet, au travers d'une augmentation de leur niveau de confort conditionnent la sobriété à l'amélioration des niveaux de performances du logement. Cette sobriété, testée au travers de simulations thermiques dynamiques sur trois variables d'utilisation (température, taux d'occupation, fermeture des volets) pouvant permettre une division par deux des consommations du bâti.