Academic literature on the topic 'Energy System Optimisation Modelling'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Energy System Optimisation Modelling.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Energy System Optimisation Modelling"

1

Rasku, Topi, Toni Lastusilta, Ala Hasan, Rakesh Ramesh, and Juha Kiviluoma. "Economic Model-Predictive Control of Building Heating Systems Using Backbone Energy System Modelling Framework." Buildings 13, no. 12 (2023): 3089. http://dx.doi.org/10.3390/buildings13123089.

Full text
Abstract:
Accessing the demand-side management potential of the residential heating sector requires sophisticated control capable of predicting buildings’ response to changes in heating and cooling power, e.g., model-predictive control. However, while studies exploring its impacts both for individual buildings as well as energy markets exist, building-level control in large-scale energy system models has not been properly examined. In this work, we demonstrate the feasibility of the open-source energy system modelling framework Backbone for simplified model-predictive control of buildings, helping addre
APA, Harvard, Vancouver, ISO, and other styles
2

Lund, Henrik, Finn Arler, Poul Østergaard, et al. "Simulation versus Optimisation: Theoretical Positions in Energy System Modelling." Energies 10, no. 7 (2017): 840. http://dx.doi.org/10.3390/en10070840.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ocłoń, Paweł, Maciej Ławryńczuk, and Marek Czamara. "A New Solar Assisted Heat Pump System with Underground Energy Storage: Modelling and Optimisation." Energies 14, no. 16 (2021): 5137. http://dx.doi.org/10.3390/en14165137.

Full text
Abstract:
The objectives of this work are: (a) to present a new system for building heating which is based on underground energy storage, (b) to develop a mathematical model of the system, and (c) to optimise the energy performance of the system. The system includes Photovoltaic Thermal Hybrid Solar Panels (PVT) panels with cooling, an evacuated solar collector and a water-to-water heat pump. Additionally, storage tanks, placed underground, are used to store the waste heat from PVT panels cooling. The thermal energy produced by the solar collectors is used for both domestic hot water preparation and the
APA, Harvard, Vancouver, ISO, and other styles
4

Muller, Cornelius J., and Ian K. Craig. "Cooling Water System Modelling for Control and Energy Optimisation Purposes." IFAC Proceedings Volumes 47, no. 3 (2014): 3973–78. http://dx.doi.org/10.3182/20140824-6-za-1003.01030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Akparibo, Awingot Richard, and Erwin Normanyo. "Application of resistance energy model to optimising electric power consumption of a belt conveyor system." International Journal of Electrical and Computer Engineering (IJECE) 10, no. 3 (2020): 2861. http://dx.doi.org/10.11591/ijece.v10i3.pp2861-2873.

Full text
Abstract:
Driven by constantly increasing energy demands, prices, environmental impact caused by carbon dioxide emissions and global warming, efficient use of energy is gaining grounds in both public and private enterprises. The energy consumption of belt conveyors can be lowered using energy modelling techniques. In this research, 
 a resistance-based mathematical energy model was utilised in 
 the electrical energy efficiency optimisation of the troughed, inclined belt conveyor system taking into account indentation rolling resistance, bulk solid flexure resistance and secondary resistance a
APA, Harvard, Vancouver, ISO, and other styles
6

Awingot, Richard Akparibo, and Normanyo Erwin. "Application of resistance energy model to optimising electric power consumption of a belt conveyor system." International Journal of Electrical and Computer Engineering (IJECE) 10, no. 3 (2020): 2861–73. https://doi.org/10.11591/ijece.v10i3.pp2861-2873.

Full text
Abstract:
Driven by constantly increasing energy demands, prices, environmental impact caused by carbon dioxide emissions and global warming, efficient use of energy is gaining grounds in both public and private enterprises. The energy consumption of belt conveyors can be lowered using energy modelling techniques. In this research, a resistance-based mathematical energy model was utilised in the electrical energy efficiency optimisation of the troughed, inclined belt conveyor system taking into account indentation rolling resistance, bulk solid flexure resistance and secondary resistance as they togethe
APA, Harvard, Vancouver, ISO, and other styles
7

Eyere, Emagbetere and Idowu Temitope Adeleye. "Modelling and Optimisation of Levilised-Cost-of-Energy Optimisation for Plant Selection in an Off-Grid Hybrid Energy System." Journal of Energy Technology and Environment 6, no. 4 (2024): 81–92. https://doi.org/10.5281/zenodo.14525374.

Full text
Abstract:
<em>This study aims to develop a selection tool that would optimise levelized-cost-of-energy (LCOE) for a hybrid energy generating and distribution systems using FUPRE as a case study. The research begins with a detailed LCOE modelling process, dissecting the cost components of the hybrid energy system. A sensitivity analysis is conducted to identify and assess the impact of various factors such as capital costs, operational expenses, and energy output on the LCOE. Optimum solutions for selecting a suitable plant for 9 different supply areas with various energy sources, including, diesel gener
APA, Harvard, Vancouver, ISO, and other styles
8

Fan, Yee Van, Zorka Novak Pintarič, and Jiří Jaromír Klemeš. "Emerging Tools for Energy System Design Increasing Economic and Environmental Sustainability." Energies 13, no. 16 (2020): 4062. http://dx.doi.org/10.3390/en13164062.

Full text
Abstract:
Energy is a fundamental element supporting societal development, particularly with the increasing dependency on the Internet of Things. It is also the main contributor to environmental impacts and subsequently, a potential sector for mitigation. Sustainable energy system design considers energy savings and energy efficiency, waste and consumption reduction, process efficiency enhancement, waste heat recovery, and integration of renewable energy. Emerging tools range from advanced Process Integration, modelling, simulation, and optimisation, to system analysis and assessment. This review covers
APA, Harvard, Vancouver, ISO, and other styles
9

KALAY, Altan, Ali AĞÇAL, and Koray ULGEN. "YATAĞAN-MUĞLA TÜRKİYE’ DE KURULU OLAN 1 MW ŞEBEKE BAĞLANTILI BİR PV GÜÇ SANTRALİNDE MATLAB-SIMULINK PORTALINDA STATCOM YOLUYLA PERFORMANS İYİLEŞTİRİLMESİ." Mühendislik Bilimleri ve Tasarım Dergisi 11, no. 1 (2023): 113–25. http://dx.doi.org/10.21923/jesd.1168233.

Full text
Abstract:
A grid-connected power system's performance depends on the produced energy's power quality and power coefficient. The higher the power quality of the energy transferred to the grid, the more critical it is for power plants, energy distribution systems and end-users. This study investigated the optimisation possibilities obtained by applying STATCOM (Static VAR Compensation) for a 1 MW PV-based Solar Power Plant (PV-SPP) in the Muğla-Türkiye province. First, the data of components such as the inverter and PV panel that make up the plant were obtained, and the raw MATLAB-Simulink modelling of th
APA, Harvard, Vancouver, ISO, and other styles
10

Christian, Ndayishimiye, Ling Lu, Chunyu Li, and Frenelus Wadslin. "Modelling and Optimisation Study of DIES Taking into Account IDR (Integrated Demand Response)." International Journal of Innovative Science and Research Technology 8, no. 1 (2023): 703–17. https://doi.org/10.5281/zenodo.7588032.

Full text
Abstract:
- The work presented here collects and synthesises technical requirements, implementation and optimisation methods for modelling grid-level matrix models, with particular reference to renewable energy access and controllable loads. The work presents the controlled connected load modelling approach and places it in the same economic modelling and control framework as the interconnection planning measurement generation facility. The paper uses system parameters to test model performance. The test results are used to illustrate and validate the described approach. This work will improve energy ef
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Energy System Optimisation Modelling"

1

Renaldi, Renaldi. "Modelling and optimisation of energy systems with thermal energy storage." Thesis, University of Edinburgh, 2018. http://hdl.handle.net/1842/31214.

Full text
Abstract:
One of the main challenges in the implementation of renewable energy is the mismatch between supply and demand. Energy storage has been identified as one of the solutions to the mismatch problem. Among various storage technologies, thermal energy storage (TES) is foreseen to have a significant role to achieve a low carbon energy systems because of the large share of thermal energy demand and its relatively low cost. However, integrating TES into energy systems requires careful design and implementation since otherwise potential financial and environmental savings may not be achieved. Computati
APA, Harvard, Vancouver, ISO, and other styles
2

Swanepoel, Jan Adriaan. "Modelling for integrated energy optimisation in cement production plants / J.A. Swanepoel." Thesis, North-West University, 2013. http://hdl.handle.net/10394/9701.

Full text
Abstract:
Cement production is an energy intensive process. In South Africa the cost of energy increased since 2006, while cement sales have dropped dramatically. It has become important to focus on methods to optimise energy consumption to achieve cost savings in the cement industry. Various methods of reducing production cost by improving energy efficiency are available, but require extended installation periods and high initial capital expenditure. Other methods such as operational optimisation can reduce production cost, but offer limited savings. The aim of this study is to integrate the optimisat
APA, Harvard, Vancouver, ISO, and other styles
3

Sarban, Singh Ranjit Singh. "A design scheme of energy management, control, optimisation system for hybrid solar-wind and battery energy storages system." Thesis, Brunel University, 2016. http://bura.brunel.ac.uk/handle/2438/13788.

Full text
Abstract:
Hybrid renewable energy system was introduced to improve the individual renewable energy power system’s productivity and operation-ability. This circumstance has led towards an extensive technological study and analysis on the hybrid renewable energy system. The extensive technological study is conducted using many different approaches, but in this research the linear programming, artificial intelligence and smart grid approaches are studied. This thesis proposed a complete hardware system development, implementation and construction of real-time DC Hybrid Renewable Energy System for solar-win
APA, Harvard, Vancouver, ISO, and other styles
4

Ortiga, Guillén Jordi. "Modelling environment for the design and optimisation of energy polygeneration systems." Doctoral thesis, Universitat Rovira i Virgili, 2010. http://hdl.handle.net/10803/8498.

Full text
Abstract:
The optimal design and operation of an energy supply system is very important for the matching of the energy production and consumption especially in the residential-tertiary sector characterized by an energy demand with a high variability. The main objective of this thesis is to develop an optimisation environment for the preliminary design and analysis of polygeneration plants. The optimisation models are organized in different units represented by blocks that can be connected between each other to create the flowsheet of the polygeneration system. To characterize the energy demand in the re
APA, Harvard, Vancouver, ISO, and other styles
5

Biberacher, Markus. "Modelling and optimisation of future energy systems : using spatial and temporal methods /." Saarbrücken : VDM Verlag Dr. Müller, 2007. http://deposit.d-nb.de/cgi-bin/dokserv?id=2995456&prov=M&dok_var=1&dok_ext=htm.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Biberacher, Markus. "Modelling and optimisation of future energy systems using spatial and temporal methods." Saarbrücken VDM Verlag Dr. Müller, 2004. http://d-nb.info/985380772/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

McDowell, Alastair Kieran Joel. "Thermal modelling and optimisation of building-integrated photo-voltaic thermal systems." Thesis, University of Canterbury. Electrical & Computer Engineering, 2015. http://hdl.handle.net/10092/11079.

Full text
Abstract:
This Masters project has involved detailed thermal analysis of a unique renewable energies building. A TRNSYS model of this building has been developed and validated by real measurements and has shown to be capable of accurately predicting room temperatures and total heat gain from a solar-thermal roofing system. Supporting experiments were conducted experimentally and numerically. An experimental solar thermal testing unit constructed for the purpose of validating the solar-thermal roof concept. This experimental apparatus has been used to evaluate the effect of various operating procedures o
APA, Harvard, Vancouver, ISO, and other styles
8

BARALIS, MATTEO. "Optimisation of geothermal resources in urban areas." Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2842491.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gong, Jindan. "Optimisation of charging strategies and energy storage operation for a solar driven charging station." Thesis, KTH, Energiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-272006.

Full text
Abstract:
The Swedish energy sector is undergoing transformational changes. Along with a rapid growth of renewables and a shift towards electromobility, the transformation is expected to bring challenges to the power system in terms of grid instability and capacity deficiency. Integrating distributed renewable electricity production into the electric vehicle (EV) charging infrastructure is a promising solution to overcome those challenges. The feasibility of implementing such a charging infrastructure system in northern Sweden is however uncertain, as the solar resources are scarce in the long winter pe
APA, Harvard, Vancouver, ISO, and other styles
10

Coelho, Bernardete. "Energy efficiency of water supply systems using optimisation techniques and micro-hydroturbines." Doctoral thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/21255.

Full text
Abstract:
Doutoramento em Engenharia Mecânica<br>A eficiência energética representa um papel significativo no esforço para a sustentabilidade por parte das empresas das águas, uma vez que, mundialmente, 35% dos custos totais com a produção de água (12 mil milhões de euros) estão a ser gastos em energia. Os principais obstáculos à melhoria da eficiência energética dos sistemas de abastecimento de água estão essencialmente relacionados com a complexidade dos sistemas e também com os baixos níveis de resiliência a nível operacional. O principal objectivo desta tese é o desenvolvimento de uma metodol
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Energy System Optimisation Modelling"

1

Ning, Dezhi, and Boyin Ding. Modelling and Optimisation of Wave Energy Converters. CRC Press, 2022. http://dx.doi.org/10.1201/9781003198956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Min, Kyung-Shik. Optimisation of the performance of a passive vehicle suspension system using experimental and theoretical modelling techniques. University of Birmingham, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fiengo, Giovanni. Common Rail System for GDI Engines: Modelling, Identification, and Control. Springer London, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Giannakidis, George, Kenneth Karlsson, Maryse Labriet, and Brian Ó. Gallachóir, eds. Limiting Global Warming to Well Below 2 °C: Energy System Modelling and Policy Development. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74424-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Golling, Christiane. A cost-efficient expansion of renewable energy sources in the European electricity system: An integrated modelling approach with a particular emphasis on diurnal and seasonal patterns. Oldenbourg Industrieverlag, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

J, Nawrocki Maciej, Dohler Mischa, and Aghvami A. Hamid, eds. Understanding UMTS radio network modelling, planning and automated optimisation: Theory and practice / edited by Maciej J. Nawrocki, Mischa Dohler, A. Hamid Aghvami. John Wiley & Sons, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Robyns, Benoit. Vector Control of Induction Machines: Desensitisation and Optimisation Through Fuzzy Logic. Springer London, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bardazzi, Rossella, and Leonardo Ghezzi, eds. Macroeconomic modelling for policy analysis. Firenze University Press, 2013. http://dx.doi.org/10.36253/978-88-6655-396-0.

Full text
Abstract:
Over the last 30 years, the Inforum approach to macro modelling has been shared by economists worldwide. Researchers have focussed much of their efforts to developing a linked system of international interindustry models with a consistent methodology. A world-wide network of research associates use the same methods and software obtaining comparable results. The XXth Inforum World Conference was held in Florence in September 2012 and this book contains a selection of papers presented during that Conference. All these contributions are aimed at policymakers, stakeholders, and applied economists.
APA, Harvard, Vancouver, ISO, and other styles
9

Desideri, Umberto, Giampaolo Manfrida, and Enrico Sciubba, eds. ECOS 2012. Firenze University Press, 2012. http://dx.doi.org/10.36253/978-88-6655-322-9.

Full text
Abstract:
The 8-volume set contains the Proceedings of the 25th ECOS 2012 International Conference, Perugia, Italy, June 26th to June 29th, 2012. ECOS is an acronym for Efficiency, Cost, Optimization and Simulation (of energy conversion systems and processes), summarizing the topics covered in ECOS: Thermodynamics, Heat and Mass Transfer, Exergy and Second Law Analysis, Process Integration and Heat Exchanger Networks, Fluid Dynamics and Power Plant Components, Fuel Cells, Simulation of Energy Conversion Systems, Renewable Energies, Thermo-Economic Analysis and Optimisation, Combustion, Chemical Reactors
APA, Harvard, Vancouver, ISO, and other styles
10

Biberacher, Markus. Modelling and optimisation of future energy systems. VDM Verlag Dr. Mueller e.K., 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Energy System Optimisation Modelling"

1

Mayon, Robert, Dezhi Ning, Boyin Ding, and Nataliia Y. Sergiienko. "Wave energy converter systems – status and perspectives." In Modelling and Optimisation of Wave Energy Converters. CRC Press, 2022. http://dx.doi.org/10.1201/9781003198956-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sciacovelli, A., Y. Li, A. Vecchi, G. Humbert, and R. Fisher. "Chapter 14. Modelling and Optimisation of Thermal Energy Storage Systems." In Thermal Energy Storage. Royal Society of Chemistry, 2021. http://dx.doi.org/10.1039/9781788019842-00480.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kázmierski, Tom J., and Leran Wang. "Modelling, Performance Optimisation and Automated Design of Mixed-Technology Energy Harvester Systems." In Energy Harvesting Systems. Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-7566-9_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mozdzynski, George. "Code Optimisation." In Earth System Modelling - Volume 2. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23831-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Biedermann, Jochen, Ludwig Cromme, and Stephan Würll. "Process Optimisation in the Packaging Industry of the Energy Industry: Optimisation of Weight Limits." In Process Modelling. Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-60120-0_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Göteman, Malin. "Optimisation of wave farms." In Modelling and Optimisation of Wave Energy Converters. CRC Press, 2022. http://dx.doi.org/10.1201/9781003198956-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zheng, Siming. "Attenuator wave energy converters." In Modelling and Optimisation of Wave Energy Converters. CRC Press, 2022. http://dx.doi.org/10.1201/9781003198956-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guo, Bingyong. "Point absorber wave energy converters." In Modelling and Optimisation of Wave Energy Converters. CRC Press, 2022. http://dx.doi.org/10.1201/9781003198956-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sergiienko, Nataliia Y., and Boyin Ding. "Multi-mode wave energy converters." In Modelling and Optimisation of Wave Energy Converters. CRC Press, 2022. http://dx.doi.org/10.1201/9781003198956-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Albano, Michele, Arne Skou, Luis L. Ferreira, et al. "7 Application system design - energy optimisation." In IoT Automation. CRC Press, 2017. http://dx.doi.org/10.1201/9781315367897-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Energy System Optimisation Modelling"

1

Strobel, Michael, and Uli Jakob. "Modelling and Analysis of Building Optimisation and Solar thermal Cooling System in Nepal." In EuroSun 2024: 15th International Conference on Solar Energy for Buildings and Industry. International Solar Energy Society, 2024. https://doi.org/10.18086/eurosun.2024.08.03.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aldren, Cameron, Nilay Shah, and Adam Hawkes. "Optimisation Under Uncertain Meteorology: Stochastic Modelling of Hydrogen Export Systems." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.191427.

Full text
Abstract:
Deriving accurate cost projections associated with producing hydrogen within the context of an energy-export paradigm is a challenging feat due to non-deterministic nature of weather systems. Many research efforts employ deterministic models to estimate costs, which could be biased by the innate ability of these models to �see the future�. To this end we present the findings of a multistage stochastic model of hydrogen production for energy export (using liquid hydrogen or ammonia as energy vectors), the findings of which are compared to that of a deterministic programme. Our modelling found t
APA, Harvard, Vancouver, ISO, and other styles
3

Costa-Dilmé, Sergi, J. Carlos Olives-Camps, Paula Muñoz-Peña, Pau García-Motilla, Oriol Gomis-Bellmunt, and Eduardo Prieto-Araujo. "Multi-physics operation and sizing optimisation in Pyomo: Application to large irrigation systems." In 2024 Open Source Modelling and Simulation of Energy Systems (OSMSES). IEEE, 2024. http://dx.doi.org/10.1109/osmses62085.2024.10668997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sousa, Daniel, Miguel Castro Oliveira, and Maria Cristina Fernandes. "Modelling of a Heat Recovery System (HRS) Integrated with Steam Turbine Combined Heat and Power (CHP) Unit in a Petrochemical Plant." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.115540.

Full text
Abstract:
This study models a Heat Recovery System (HRS) within a petrochemical plant, assessing its economic and environmental viability. The system integrates four combustion processes and a condensing steam turbine combined heat and power (ST-CHP) generation unit, along with waste heat recovery technologies to reduce the plant�s energy use. The developed system-based approach extends a previous methodology, initially focused on reducing energy consumption in production processes, to encompass energy supply systems (in which CHP is included) as well. Simulation models were developed for two improvemen
APA, Harvard, Vancouver, ISO, and other styles
5

Dolat, Meshkat, Andrew D. Wright, Mohammadamin Zarei, Melis S. Duyar, and Michael Short. "Kinetic Modelling and Optimisation of Co2 Capture and Utilisation to Methane on Dual Function Material." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.187825.

Full text
Abstract:
Dual function materials (DFMs) integrate CO2 capture and conversion, offering a streamlined approach to Power-to-Gas (PtG) processes. This study develops a cyclic steady-state model for the DFM-based methanation of CO2 using the finite difference method. The model captures the adsorption, purge, and methanation stages and incorporates a semi-implicit numerical scheme for stability and accuracy. Bayesian optimisation is used to explore operational and design parameters to maximise methane productivity, CO2 conversion, and product purity. Multi-objective optimisation reveals key trade-offs among
APA, Harvard, Vancouver, ISO, and other styles
6

Zarei, Mohammadamin, Meshkat Dolat, Rohit Murali, et al. "Real-time dynamic optimisation for sustainable biogas production through anaerobic co-digestion with hybrid models." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.130144.

Full text
Abstract:
Renewable energy and energy efficiency are increasingly recognised as crucial for creating new economic opportunities and mitigating environmental impacts. Anaerobic digestion (AD) transforms organic materials into a clean, renewable energy source. Co-digestion of various organic wastes and energy crops addresses the disadvantages of single-substrate digestion, increasing production flexibility yet adding process complexity and sensitivity. This study employs a two-pronged approach to optimise biogas production while considering global warming potential: a nonlinear programming (NLP) model for
APA, Harvard, Vancouver, ISO, and other styles
7

Kay, Harry, Fernando Vega-Ramon, and Dongda Zhang. "Hybrid Modelling for Reaction Network Simulation in Syngas Methanol Production." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.172680.

Full text
Abstract:
Sustainability is a thriving global topic of concern and following the advancement of technological progress and increased standards of living, the demands for energy, fuels, chemicals and other requirements have increased significantly. Methanol is one such chemical which has seen increases in demand due to its importance as a precursor in the development of widely used chemicals such as formaldehyde. In order to gain insight into the reaction mechanisms driving the process, it is beneficial to develop kinetic models that accurately describe the system for several reasons: (i) to develop proc
APA, Harvard, Vancouver, ISO, and other styles
8

Papadopoulos, Georgios, Florian Krismer, and Jürgen Biela. "Electro-Mechanical Switching Cell Modelling Framework for Converter Design Optimisation." In 2024 Energy Conversion Congress & Expo Europe (ECCE Europe). IEEE, 2024. http://dx.doi.org/10.1109/ecceeurope62508.2024.10751910.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ewald, Thomas, Florian Krismer, and Jürgen Biela. "Modelling Framework Architecture for Converter Optimisation and Virtual Component Prototyping." In 2024 Energy Conversion Congress & Expo Europe (ECCE Europe). IEEE, 2024. http://dx.doi.org/10.1109/ecceeurope62508.2024.10751872.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Srivastava, Yashi, Anurag Shrivastava, Zaid Alsalami, et al. "Fuel Economy Optimisation by Utilising Hybrid Energy Storage System." In 2024 1st International Conference on Sustainable Computing and Integrated Communication in Changing Landscape of AI (ICSCAI). IEEE, 2024. https://doi.org/10.1109/icscai61790.2024.10866143.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Energy System Optimisation Modelling"

1

McCormick, Benjamin, Nick Roxburgh, Jennifer Macdiarmid, and Gary Polhill. Large Scale Modelling: Government Influence On The Rural Social-environmental System. University of Aberdeen, 2024. http://dx.doi.org/10.57064/2164/24533.

Full text
Abstract:
This project is split into two interacting components 1. A business-to-business simulation of nutrient production and supply 2. An optimisation model of nutrient supply given different subsidy scenarios with the objectives of: - understanding the alignment of subsidies and nutrient production - balancing domestic nutrient supply and greenhouse gas emissions - understanding how domestic and international nutrient supply may be impacted by changes in government policies
APA, Harvard, Vancouver, ISO, and other styles
2

English, B. C., R. R. Alexander, K. H. Loewen, S. A. Coady, G. V. Cole, and W. R. Goodman. Development of a farm-firm modelling system for evaluation of herbaceous energy crops. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5995038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Leaver, Jonathan, Kenneth Gillingham, and A. Baglino. System Dynamics Modelling of Pathways to a Hydrogen Economy in New Zealand: Final Report. Unitec ePress, 2012. http://dx.doi.org/10.34074/rsrp.12012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Leaver, Jonathan, Kenneth Gillingham, and A. Baglino. System Dynamics Modelling of Pathways to a Hydrogen Economy in New Zealand: Final Report. Unitec ePress, 2012. http://dx.doi.org/10.34074/rsrp.12012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gurieiev, Viktor, Yulii Kutsan, Anna Iatsyshyn, et al. Simulating Systems for Advanced Training and Professional Development of Energy Specialists in Power Sector. [б. в.], 2020. http://dx.doi.org/10.31812/123456789/4456.

Full text
Abstract:
The crisis of the system of professional development and personnel training in the energy sector exists not only in Ukraine but also all over the world. The article describes the concept of development and functioning of the industry system of personnel training in the energy sector of Ukraine. The importance of using modern web-oriented technologies to improve the skills of operational and dispatching personnel in the energy sector of Ukraine is substantiated. The meth- ods of distributed power system operating modes modelling are presented. De- velopment and software tools for the constructi
APA, Harvard, Vancouver, ISO, and other styles
6

Melanie, Haupt, and Hellweg Stefanie. Synthesis of the NRP 70 joint project “Waste management to support the energy turnaround (wastEturn)”. Swiss National Science Foundation (SNSF), 2020. http://dx.doi.org/10.46446/publication_nrp70_nrp71.2020.2.en.

Full text
Abstract:
A great deal of energy can be sourced both directly and indirectly from waste. For example, municipal waste with an energy content of around 60 petajoules is incinerated in Switzerland every year. The energy recovered directly from this waste covers around 4 % of the Swiss energy demand. However, the greatest potential offered by waste management lies in the recovery of secondary raw materials during the recycling process, thus indirectly avoiding the energy-intensive production of primary raw materials. In order to optimise the contribution to the energy turnaround made by waste management, a
APA, Harvard, Vancouver, ISO, and other styles
7

Kober, Tom, Evangelos Panos, Yi Wan, Russell McKenna, Alexander Fuchs, and Turhan Demiray. Long-term integration of large-scale gas storage in Switzerland. Paul Scherrer Institute, PSI, 2024. http://dx.doi.org/10.55402/psi:63482.

Full text
Abstract:
This study was mandated by Gaznat and is an associated case study to the SWEET project "Sustainable and Resilient Energy for Switzerland" (SURE). It analyses the role of large-scale gas storage in the Swiss energy system taking into consideration the Swiss energy strategy and climate goals as well as the security of supply objectives within a quantitative model-based scenario framework. Related to largescale gas storages, the study particularly focuses on potentially new gas storage options for Switzerland, such as Lined Rock Cavern – LRC storages and Liquefied Natural Gas – LNG storages. In o
APA, Harvard, Vancouver, ISO, and other styles
8

You, Siming, Ondřej Mašek, Bauyrzhan Biakhmetov, et al. Feasibility and impacts of Bioenergy Trigeneration systems (BioTrig) in disadvantaged rural areas in India. University of Glasgow, 2023. http://dx.doi.org/10.36399/gla.pubs.305660.

Full text
Abstract:
This project aims to evaluate the techno-economic and social feasibility, and socio-environmental impacts of bioenergy trigeneration (electricity, clean cooking fuel, and green soil conditioner) systems that tackle the triple crisis of poor electrification, household air pollution, and farmland contamination in rural India. This system is called BioTrig. A project workshop has been held in November in India to discuss and finalise action plans. A questionnaire has been developed to understand the energy, resource, and new technology acceptance of rural households in India. Chemical process mod
APA, Harvard, Vancouver, ISO, and other styles
9

Perdigão, Rui A. P. Strengthening Multi-Hazard Resilience with Quantum Aerospace Systems Intelligence. Synergistic Manifolds, 2024. http://dx.doi.org/10.46337/240301.

Full text
Abstract:
The present work further enhances and deploys our Quantum Aerospace Systems Intelligence technologies (DOI: 10.46337/quasi.230901) onto Multi-Hazard risk assessment and action, from sensing and prediction to modelling, decision support and active response, towards strengthening its fundamental knowledge, awareness and resilience in the face of multi-domain challenges. Moreover, it introduces our updated post-quantum aerospace engineering ecosystem for empowering active system dynamic capabilities to mitigate or even counter multi-hazard threats from space, leveraging our high energy technologi
APA, Harvard, Vancouver, ISO, and other styles
10

Corriveau, L., and E. G. Potter. Advancing exploration for iron oxide-copper-gold and affiliated deposits in Canada: context, scientific overview, outcomes, and impacts. Natural Resources Canada/CMSS/Information Management, 2024. http://dx.doi.org/10.4095/332495.

Full text
Abstract:
The Geo-mapping for Energy and Minerals (GEM) and Targeted Geoscience Initiative (TGI) programs conducted extensive collaborative research on mineral systems with iron oxide-copper-gold (IOCG) and affiliated deposits in prospective settings of Canada. Regional alteration mapping as well as geochemical and geophysical modelling undertaken under the GEM program documented the evolution of polymetallic metasomatic systems with iron-oxide and alkali-calcic alteration and led to an increased recognition of the mineral potential of poorly explored areas and historic deposits of the Great Bear magmat
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!