Log in

Relevant bibliographies by topics / Engineering design graphics / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Engineering design graphics.

Dissertations / Theses on the topic 'Engineering design graphics'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Engineering design graphics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Rust, Ciana. "Facilitating the implementation of Computer-Aided Design into the Engineering Graphics Design classroom." Diss., University of Pretoria, 2017. http://hdl.handle.net/2263/65464.

Full text

Abstract:

The purpose of this study was to investigate what the EGD teacher needed in order to facilitate the successful implementation of CAD as an education tool into the EGD classroom. The researcher aimed to understand how teachers perceive CAD with regard to its usefulness and ease of use in an EGD class. The primary research question was as follows: What is needed to facilitate the implementation of CAD into the EGD classroom? The secondary research questions were: ? What are the barriers that prevent teachers from implementing CAD in their EGD classes? ? What lessons can be learnt from those scho

APA, Harvard, Vancouver, ISO, and other styles

2

Bertoline, Gary R. "The effectiveness of using CADD (Computer-Aided Design Drafting) to learn engineering design graphics /." The Ohio State University, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487326511714672.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Grandhee, Ashok A. "Design of a computer graphics laboratory." Ohio : Ohio University, 1985. http://www.ohiolink.edu/etd/view.cgi?ohiou1184005646.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tolmie, Donald Francois. "Design of a low-resource 2D graphics engine for FPGAs." Master's thesis, Faculty of Engineering and the Built Environment, 2018. http://hdl.handle.net/11427/30042.

Full text

Abstract:

This study focused on the design and implementation of a low-resource graphics engine, MicroGE, which can be implemented on an FPGA. MicroGE uses a minimal amount of FPGA resources when compared to other graphics engines. After researching existing graphics engines, it was discovered that most make use of a memory space to store frame buffer data. Because of the restrictions that were imposed on the design of MicroGE, it could not incorporate a large enough memory space to store a frame buffer. It was specified that MicroGE should be able to fit on low-resource FPGAs, without any external memo

APA, Harvard, Vancouver, ISO, and other styles

5

Parborg, Sebastian, and Rasmus Holm. "Generative design of game graphics and levels." Thesis, Linköpings universitet, Interaktiva och kognitiva system, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-149036.

Full text

Abstract:

This thesis describes the implementation and evaluation of a modular approach for generating 2D side-scroller game levels from a procedurally generated 3D world. Manually generating large amounts of game levels can take considerable amounts of time, and it maybe desirable to automate this process, using procedural content generation. The problem with using procedural content generation is that it is hard to generate coherent game levels. We implement a modular pipeline which, given a set of heightmaps, generates a 3Dworld. From this world, 2D game levels are generated by pathing and extracting

APA, Harvard, Vancouver, ISO, and other styles

6

Mansey, Pradeep P. "A PHIGS based graphics interface for MECSYN." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/53139.

Full text

Abstract:

This thesis presents the development of an interactive graphics interface for MECSYN, a planar mechanism synthesis program. The purpose of this work is to produce a dynamic graphics interface, independent of a graphics device and providing a high level of user interaction. To achieve this, the proposed three-dimensional graphics standard PHIGS (Programmers Hierarchical Interactive Graphics System) is used for graphics support software. An overview of the synthesis theory is presented. The program structure is described and presented along with a listing of the graphics and interface routines o

APA, Harvard, Vancouver, ISO, and other styles

7

Han, Yiding. "Graphics Processing Unit-Based Computer-Aided Design Algorithms for Electronic Design Automation." DigitalCommons@USU, 2014. https://digitalcommons.usu.edu/etd/3868.

Full text

Abstract:

The electronic design automation (EDA) tools are a specific set of software that play important roles in modern integrated circuit (IC) design. These software automate the design processes of IC with various stages. Among these stages, two important EDA design tools are the focus of this research: floorplanning and global routing. Specifically, the goal of this study is to parallelize these two tools such that their execution time can be significantly shortened on modern multi-core and graphics processing unit (GPU) architectures. The GPU hardware is a massively parallel architecture, enabling

APA, Harvard, Vancouver, ISO, and other styles

8

Jones, Charlie Alan. "Operational extensions to a power distribution design workstation for enhanced emergency restoration." Thesis, This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-03042009-040652/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Chuang, Erika Shu-Ching. "Design and implementation of a real-time video and graphics scaler." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43499.

Full text

Abstract:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1997.<br>Includes bibliographical references (leaf 112).<br>by Erika Shu-Ching Chuang.<br>M.Eng.

APA, Harvard, Vancouver, ISO, and other styles

10

Kulik, Joanna L. "The design of a fast and flexible Internet subscription system using content graphics." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/32337.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, June 2004.<br>Includes bibliographical references (p. 137-142).<br>This dissertation describes the design and evaluation of the Fast, Flexible Forwarding system (F3), a distributed system for disseminating information to networked subscribers. It examines existing subscription approaches, proposes F3 as an alternative to these approaches, and presents results from comparisons of F3 and other subscription approaches. Existing subscription approaches examined in the dissertation fall int

APA, Harvard, Vancouver, ISO, and other styles

11

Taylor, Kenneth William 1980. "The design and implementation of a 3D graphics pipeline for the raw reconfigurable architecture." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28540.

Full text

Abstract:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2004.<br>Includes bibliographical references (p. 345-346).<br>This thesis presents the design and implementation of a 3D graphics pipeline, built on top of the "Raw" processor developed at MIT. The Raw processor consists of a tiled array of CPUs, caches, and routing processors connected by several high-speed networks, and can be treated as a coarse-grained reconfigurable architecture. The graphics pipeline has four stages, and four-way parallelism in each stage, and is mapped on to a 16-

APA, Harvard, Vancouver, ISO, and other styles

12

許健泉 and Kin-chuen Hui. "Solid modelling and its application in mould design: a sweep primitive approach." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1990. http://hub.hku.hk/bib/B31231822.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Hui, Kin-chuen. "Solid modelling and its application in mould design : a sweep primitive approach /." [Hong Kong : University of Hong Kong], 1990. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12747300.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Saha, Shamik. "SSAGA: Streaming Multiprocessors (SMs) Sculpted for Asymmetric General Purpose Graphics Processing Unit (GPGPU) Applications." DigitalCommons@USU, 2016. https://digitalcommons.usu.edu/etd/5196.

Full text

Abstract:

The evolution of the Graphics Processing Units (GPUs) over the last decade, has reinforced general purpose computing while sustaining a steady performance growth in graphics intensive applications. However, the immense performance improvement is generally associated with a steep rise in GPU power consumption. Consequently, GPUs are already close to the abominable power wall. With a massive popularity of the mobile devices running general-purpose GPU (GPGPU) applications, it is of utmost importance to ensure a high energy efficiency, while meeting the strict performance requirements. In this wo

APA, Harvard, Vancouver, ISO, and other styles

15

Uhorchak, R. Steven. "An object-oriented class library for the creation of engineering graphs." Thesis, Virginia Tech, 1993. http://hdl.handle.net/10919/42201.

Full text

Abstract:

Since the availability of the first PHIGS (Programmers Hierarchical Interactive Graphics System) implementation in the mid 1980’s, interest in the use of PHIGS has been steadily growing among the CAD applications developer’s community. Every year, more PHIGS-based CAD applications programs are being created to ensure portability and make use of the high-level support provided by PHIGS [JAYA93b]. One of the common uses of computer graphics in engineering is for the creation of graphs. Commonly used graphs, such as line graphs (two-dimensional or three-dimensional), bar charts, pie charts, sur

APA, Harvard, Vancouver, ISO, and other styles

16

McCrickard, D. Scott. "Maintaining information awareness in a dynamic environment : assessing animation as a communication mechanism." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/9125.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Ramachandruni, Radha Krishna. "Design of 3D Accelerator for Mobile Platform." Thesis, Linköping University, Department of Electrical Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7082.

Full text

Abstract:

<p>Implement a high-level model of computationally intensive part of 3D graphics pipe-line. Increasing popularity of handheld devices along with developments in hardware technology, 3D graphics on mobile devices is fast becoming a reality. Graphics processing is essentially complex and computationally demanding. In order to achieve scene realism and perception of motion, identifying and accelerating bottle necks is crucial. This thesis is about Open-GL graphics pipe-line in general. Software which implements computationally intensive part of graphics pipe-line is built. In essence a rasterizat

APA, Harvard, Vancouver, ISO, and other styles

18

Selldin, Håkan. "Design and Implementation of an Application. Programming Interface for Volume Rendering." Thesis, Linköping University, Department of Science and Technology, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1209.

Full text

Abstract:

<p>To efficiently examine volumetric data sets from CT or MRI scans good volume rendering applications are needed. This thesis describes the design and implementation of an application programming interface (API) to be used when developing volume-rendering applications. A complete application programming interface has been designed. The interface is designed so that it makes writing application programs containing volume rendering fast and easy. The interface also makes created application programs hardware independent. Volume rendering using 3d-textures is implemented on Windows and Unix plat

APA, Harvard, Vancouver, ISO, and other styles

19

Batsios, Nicholas. "Design and construction of a multi-segment snake-like wheeled vehicle." Ohio : Ohio University, 1997. http://www.ohiolink.edu/etd/view.cgi?ohiou1177610642.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Li, Jiyuan. "Construction Simulation of Wudian Using 3-D Graphics and Animations." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429212482.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Hilton, Michael. "Improving WebIDE through Delightful Design and Gamification." DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/931.

Full text

Abstract:

WebIDE is a web-based online learning environment. WebIDE has been used successfully to teach CS0 and CS1 students Java and C concepts and software engineering best practices, specically Test Driven Development. Previous Web- IDE development has concentrated on developing functionality. The main goal of this eort is to improve two non-functional aspects of WebIDE. The rst is to design a more delightful user interface. The second is to add a scoring mecha- nism that encourages students to develop best practices. The scoring mechanism rewards students who answer the question correctly on the rst

APA, Harvard, Vancouver, ISO, and other styles

22

Oh, Chang-Geun. "The Effects of Proximity Compatibility and Graphics on Spatio-Temporal SituationAwareness for Navigation." Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1453218915.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Rael, Joshua. "Colormoo: An Algorithmic Approach to Generating Color Palettes." Scholarship @ Claremont, 2014. http://scholarship.claremont.edu/cmc_theses/975.

Full text

Abstract:

Selecting one color can be done with relative ease, but this task becomes more difficult with each subsequent color. Colormoo is an online tool aimed at solving this problem. We implement three algorithms for generating color palettes based off of a starting color. Data is collected for each palette that is generated. Our analysis reveals two of the algorithms are preferred, but under different circumstances. Furthermore, we find that users prefer palettes containing colors that are compatible, but not too similar. With refined heuristics, we believe these techniques can be extended and applie

APA, Harvard, Vancouver, ISO, and other styles

24

Van, Huyssteen Salomon Stephanus. "Parallel paradigms in optimal structural design." Thesis, Stellenbosch : Stellenbosch University, 2011. http://hdl.handle.net/10019.1/18017.

Full text

Abstract:

Thesis (MScEng)--Stellenbosch University, 2011.<br>ENGLISH ABSTRACT: Modern-day processors are not getting any faster. Due to the power consumption limit of frequency scaling, parallel processing is increasingly being used to decrease computation time. In this thesis, several parallel paradigms are used to improve the performance of commonly serial SAO programs. Four novelties are discussed: First, replacing double precision solvers with single precision solvers. This is attempted in order to take advantage of the anticipated factor 2 speed increase that single precision computations hav

APA, Harvard, Vancouver, ISO, and other styles

25

Sabaliauskas, Vaidotas. "Tinklalapių grafikos kūrimo ir optimizavimo sistema." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_143749-33804.

Full text

Abstract:

Šiame darbe kalbama apie tinklalapių grafokos kūrimo problemas. Antrajame skyriuje aptariami pagrindiniai failų formatai, jų privalumai ir trūkumai. Aptariama tinkamo failo formato parinkimo reikšmė, tinklo pralaidumo reikalavimai, grafinė ir suglaudinimo programinė įranga, jos palyginimas. trečiame skyriuje analizuojama kuriama programinė įranga. Funkcianiams reikalavimams apibrėžti naudojamas panaudojimo atvejų modelis. Šiame skyriuje taip pat aprašoma sistemos architektūra, peteikiama sistemos klasių diagrama ir aprašomi jos metodai bei funkcijos. Taip pat aprašomos veiklos diagramos. Patei

APA, Harvard, Vancouver, ISO, and other styles

26

Basu, Prabal. "Toward Reliable, Secure, and Energy-Efficient Multi-Core System Design." DigitalCommons@USU, 2019. https://digitalcommons.usu.edu/etd/7517.

Full text

Abstract:

Computer hardware researchers have perennially focussed on improving the performance of computers while stipulating the energy consumption under a strict budget. While several innovations over the years have led to high performance and energy efficient computers, more challenges have also emerged as a fallout. For example, smaller transistor devices in modern multi-core systems are afflicted with several reliability and security concerns, which were inconceivable even a decade ago. Tackling these bottlenecks happens to negatively impact the power and performance of the computers. This disserta

APA, Harvard, Vancouver, ISO, and other styles

27

Seletsky, Ilya iseletsk. "Real Time Visibility Culling With Hardware Occlusion Queries and Uniform Grids." DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/975.

Full text

Abstract:

Culling out non-visible portions of 3D scenes is important for rendering large complex worlds at an interactive frame rate. Past 3D engines used static prebaked visibility data which was generated using complex algorithms. Hardware Occlusion Queries are a modern feature that allows engines to determine if objects are invisible on the fly. This allows for fully dynamic destructible and editable environments as opposed to static prebaked environments of the past. This paper presents an algorithm that uses Hardware Occlusion Queries to cull fully dynamic scenes in real-time. This algorithm is rel

APA, Harvard, Vancouver, ISO, and other styles

28

Tan, Adrian Hadipriono. "While Stands the Colosseum: A Ground-Up Exploration of Ancient Roman Construction Techniques using Virtual Reality." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429228335.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Nilsson, Jesper. "Mixed RTL and gate-level power estimation with low power design iteration." Thesis, Linköping University, Department of Electrical Engineering, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1685.

Full text

Abstract:

<p>In the last three decades we have witnessed a remarkable development in the area of integrated circuits. From small logic devices containing some hundred transistors to modern processors containing several tens of million transistors. However, power consumption has become a real problem and may very well be the limiting factor of future development. Designing for low power is therefore increasingly important. To accomplice an efficient low power design, accurate power estimation at early design stage is essential. The aim of this thesis was to set up a power estimation flow to estimate the

APA, Harvard, Vancouver, ISO, and other styles

30

Surangi, Vani Indrani. "Game design and development." CSUSB ScholarWorks, 2006. https://scholarworks.lib.csusb.edu/etd-project/3098.

Full text

Abstract:

The project focuses on computer tools suitable for particular game genres and how they are used to develop 3D computer games. As part of learning about the tools, the author developed a 3D computer adventure game called "Adventures of Smiley" using Macromedia Director MX and 3D Studio Max. The game's purpose is to engage children using a friendly interface while they learn about different topics in various subject areas through lessons and puzzles. The research gathered information about the current game industry, technologies and game genres, which can be used as a reference for the beginning

APA, Harvard, Vancouver, ISO, and other styles

31

Hung, Cheng-Yu. "Multi-user game development." CSUSB ScholarWorks, 2007. https://scholarworks.lib.csusb.edu/etd-project/3122.

Full text

Abstract:

This project included the development of a multi-user game that takes place in a 3 dimensional world of the computer science department. Basically, the game allows prospective students to meet existing students and faculty in a virtual open house that takes place within the third floor of Jack Brown Hall. Users can walk around Jack Brown Hall and type text messages to chat with each other.

APA, Harvard, Vancouver, ISO, and other styles

32

Andersson, Tom, and Hampus Strömsholm. "Immersion, Make and Break the Game - a Study on the Impact of Immersion." Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20496.

Full text

Abstract:

Att en spelare lever sig in i ett spel kan ses som en av de viktigaste delarna av ett bra spel och spelare vill ständigt ha spel där dom känner mer och mer inlevelse. Tidigare forskning visar på att inlevelse i digitala spel inte är ett enkelt område och för att kunna forska på det så krävs det att man delar upp det i mindre, mer hanterbara, delområden som kan undersökas både som enskilda områden och i relation till andra. Denna uppsats bryter ut tre delområden som alla bidrar till inlevelse i spel för att utforska, testa och utvärdera. De valda delområdena används för att skapa en artefakt i

APA, Harvard, Vancouver, ISO, and other styles

33

McCulloch, Thomas L. "Feasible Form Parameter Design of Complex Ship Hull Form Geometry." ScholarWorks@UNO, 2018. https://scholarworks.uno.edu/td/2552.

Full text

Abstract:

This thesis introduces a new methodology for robust form parameter design of complex hull form geometry via constraint programming, automatic differentiation, interval arithmetic, and truncated hierarchical B- splines. To date, there has been no clearly stated methodology for assuring consistency of general (equality and inequality) constraints across an entire geometric form parameter ship hull design space. In contrast, the method to be given here can be used to produce guaranteed narrowing of the design space, such that infeasible portions are eliminated. Furthermore, we can guarantee that

APA, Harvard, Vancouver, ISO, and other styles

34

Zhang, Cheng. "The Moon Experience: Designing Participatory Immersive Environments for Experiential Learning." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1366363049.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Mafalda, Rovilson. "Efeitos do uso de diferentes métodos de representação gráfica no desenvolvimento da habilidade de visualização espacial." Universidade de São Paulo, 2000. http://www.teses.usp.br/teses/disponiveis/3/3146/tde-25102001-091833/.

Full text

Abstract:

Neste estudo são avaliadas três atividades com relação a seus efeitos no desenvolvimento da habilidade de visualização espacial. Elas são baseadas respectivamente em aplicações de desenho técnico, modelos de arame e modelos de sólidos. Na terceira atividade há também exercícios em que são utilizadas máquinas com comando numérico. A avaliação foi realizada com base em ontuãções obtidas por estudantes no teste MRT, após a prática das atividades em mini cursos experimentais, os quais foram aplicados segundo o método de planejamento experimental chamado Julgamentos Cruzados, e os dados obtidos, an

APA, Harvard, Vancouver, ISO, and other styles

36

Duval, Thierry. "Models for design, implementation and deployment of 3D Collaborative Virtual Environments." Habilitation à diriger des recherches, Université Rennes 1, 2012. http://tel.archives-ouvertes.fr/tel-00764830.

Full text

Abstract:

This work aims at providing some cues in order to address the essential requirements about the design of 3D Collaborative Virtual Environments (CVE). We have identified six essential topics that must be addressed when designing a CVE. For each of them, we present a state of the art about the solutions that can address this topic, then we show our own contributions: how we improve existing solutions and what are our new propositions. 1 - Choosing a model for the distribution of a CVE We need a distribution model to distribute as efficiently as possible the content of a CVE among all the nodes i

APA, Harvard, Vancouver, ISO, and other styles

37

Bhattacharya, Paromita. "A Case Study of the Effects of a Web Interface Redesign Based on Usability Guidelines." Digital Commons @ East Tennessee State University, 2011. https://dc.etsu.edu/etd/1320.

Full text

Abstract:

Usability guidelines for user interface (UI) design formulated by Nielsen and other authorities were used to redesign the web interface for a web based distance education course. The website's original UI, as judged by a group of web design professionals, violated standard guidelines for usability, readability, learnability, consistency, efficiency of use and flexibility. The original and redesigned UIs were tested using thinking aloud testing, a user satisfaction survey, and usability inspection. The results of user testing and heuristic evaluation suggest that the use of these guidelines in

APA, Harvard, Vancouver, ISO, and other styles

38

Dickens, Erik. "Towards automatic detection and visualization of tissues in medical volume rendering." Thesis, Linköping University, Department of Science and Technology, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-9800.

Full text

Abstract:

<p>The technique of volume rendering can be a powerful tool when visualizing 3D medical data sets. Its characteristic of capturing 3D internal structures within a 2D rendered image makes it attractive in the analysis. However, the applications that implement this technique fail to reach out to most of the supposed end-users at the clinics and radiology departments of today. This is primarily due to problems centered on the design of the Transfer Function (TF), the tool that makes tissues visually appear in the rendered image. The interaction with the TF is too complex for a supposed end-user a

APA, Harvard, Vancouver, ISO, and other styles

39

Kim, Leejin. "Analysis and Construction of Engaging Facial Forms and Expressions: Interdisciplinary Approaches from Art, Anatomy, Engineering, Cultural Studies, and Psychology." VCU Scholars Compass, 2013. http://scholarscompass.vcu.edu/etd/567.

Full text

Abstract:

The topic of this dissertation is the anatomical, psychological, and cultural examination of a human face in order to effectively construct an anatomy-driven 3D virtual face customization and action model. In order to gain a broad perspective of all aspects of a face, theories and methodology from the fields of art, engineering, anatomy, psychology, and cultural studies have been analyzed and implemented. The computer generated facial customization and action model were designed based on the collected data. Using this customization system, culturally-specific attractive face in Korean popular

APA, Harvard, Vancouver, ISO, and other styles

40

Supiratana, Panon. "Graphical visualization and analysis tool of data entities in embedded systems engineering." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-10428.

Full text

Abstract:

Several decades ago, computer control systems known as Electric Control Units (ECUs) were introduced to the automotive industry. Mechanical hardware units have since then increasingly been replaced by computer controlled systems to manage complex tasks such as airbag, ABS, cruise control and so forth. This has lead to a massive increase of software functions and data which all needs to be managed. There are several tools and techniques for this, however, current tools and techniques for developing real-time embedded system are mostly focusing on software functions, not data. Those tools do not

APA, Harvard, Vancouver, ISO, and other styles

41

Serim, Baris. "Designing for Engagement: Using indirect manipulation to support form exploration in 3D modeling." Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-22790.

Full text

Abstract:

This thesis aims to study the design possibilities for supporting explorative form-finding in 3D modeling applications. For today’s many design professions, 3D forms are achieved partly in engagement with digital environments. Use of software has far exceeded final idea execution, extending to the early phases of design work in which the outcome is not predetermined. This insight led designers of interactive systems support sketching and ideating activities by reducing the risk of experimentation and cognitive effort demanded from user. Yet, there has been less emphasis on traditional design a

APA, Harvard, Vancouver, ISO, and other styles

42

Kamili, Hermawan 1977. "Collaborative Graphical User Interface Design." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/80936.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Shahdad, Mir Abubakr. "Engineering innovation (TRIZ based computer aided innovation)." Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3317.

Full text

Abstract:

This thesis describes the approach and results of the research to create a TRIZ based computer aided innovation tools (AEGIS and Design for Wow). This research has mainly been based around two tools created under this research: called AEGIS (Accelerated Evolutionary Graphics Interface System), and Design for Wow. Both of these tools are discussed in this thesis in detail, along with the test data, design methodology, test cases, and research. Design for Wow (http://www.designforwow.com) is an attempt to summarize the successful inventions/ designs from all over the world on a web portal which

APA, Harvard, Vancouver, ISO, and other styles

44

Samarakoon, Mudiyanselage Buddhika. "Design evolution of engineering systems using bond graphs and genetic programming." Thesis, University of British Columbia, 2012. http://hdl.handle.net/2429/41900.

Full text

Abstract:

Engineering design is a complex task, which typically involves multiple physical domains. It can benefit from a modeling tool that can represent different domains in a unified manner. For complex designs, optimization by traditional techniques (such as gradient-based methods) may not be appropriate. Evolutionary methodologies may be used in design optimization of complex engineering systems. This research is based on a framework for evolutionary design system consisting of a machine health monitoring system, model-based evolutionary design optimization system, and a design expert system. The d

APA, Harvard, Vancouver, ISO, and other styles

45

De, Cino Thomas James. "A Usability and Learnability Case Study of Glass Flight Deck Interfaces and Pilot Interactions through Scenario-based Training." NSUWorks, 2016. http://nsuworks.nova.edu/gscis_etd/948.

Full text

Abstract:

In the aviation industry, digitally produced and presented flight, navigation, and aircraft information is commonly referred to as glass flight decks. Glass flight decks are driven by computer-based subsystems and have long been a part of military and commercial aviation sectors. Over the past 15 years, the General Aviation (GA) sector of the aviation industry has become a recent beneficiary of the rapid advancement of computer-based glass flight deck (GFD) systems. While providing the GA pilot considerable enhancements in the quality of information about the status and operations of the aircr

APA, Harvard, Vancouver, ISO, and other styles

46

Lau, Kevin Keung. "The use of graphical techniques in component selection systems." Thesis, University of Bath, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334701.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Morris, Taylor Javier. "A software automation framework for image-typeface matching in graphic design." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/85480.

Full text

Abstract:

Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 43-44).<br>This research proposes the framework for an automation tool that facilitates the graphic design process of image-font pairing or matching. Considering traditional graphic design principles, a multi-step software algorithm was developed to emulate the process of determining proportions and visual axes of both images and fonts. The algorithm then matches these visual markers using a decision hierarchy to

APA, Harvard, Vancouver, ISO, and other styles

48

Kiss, Steven Brent. "The Effectiveness of Pilot Response to Generate Concatenated Downlink Messages after Evaluation of Hybrid Graphic-Text Clearances." Wright State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=wright1369499745.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Gallagher, J. B. Seamus. "In search of paradigms in multimedia systems design : an analysis of software engineering and graphic design approaches using the Kuhnian model." Thesis, Queen's University Belfast, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287613.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Lee, Juney M. Arch Massachusetts Institute of Technology. "Grammatical design with graphic statics : rule-based generation of diverse equilibrium structures." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/99605.

Full text

Abstract:

Thesis: M. Eng., Massachusetts Institute of Technology, Department of Civil and Environmental Engineering, 2015.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 129-131).<br>During early stages of design, an architect tries to control space by "finding a form" among countless possible forms, while an engineer tries to control forces by "form-finding" an optimized solution of that particular form. Most commonly used parametric tools in architectural design provide the user with extensive geometric freedom in absence of performance, while engineering analys

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!