Relevant bibliographies by topics / Engineering, Industrial / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Engineering, Industrial.

Dissertations / Theses on the topic 'Engineering, Industrial'

Author: Grafiati
Published: 4 June 2021
Last updated: 27 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Engineering, Industrial.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Affaticati, P. E. "Engineering transketolase for industrial biotechnology." Thesis, University College London (University of London), 2017. http://discovery.ucl.ac.uk/1557943/.

Full text
Abstract:
Transketolase is a ubiquitous enzyme of the thiamine diphosphate-dependent (TPP) family involved in the Calvin cycle and the pentose phosphate pathway. Substrate-walking of E. coli transketolase progressively shifted the target acceptor substrate from phosphorylated aldehydes to non-polar aromatic aldehydes. However, its applicability as an industrial biocatalyst is limited by the lack of combination mutants exhibiting satisfactory substrate breadth and stability. The S385Y/D469T/R520Q variant, which had previously been thought to exhibit differential binding to aromatic substrates, was analys
APA, Harvard, Vancouver, ISO, and other styles
2

Pask, Frederick. "Systematic engineering of industrial ovens." Thesis, University of Surrey, 2017. http://epubs.surrey.ac.uk/813216/.

Full text
Abstract:
This research is aimed at improving low-grade industrial ovens (less than 250°C) in the manufacturing industry. Industrial ovens have a significant bearing on the environmental and economic impacts of a manufacturing factory due to their excessive fossil fuel consumption and influence on product quality. Therefore, this thesis’ research question is: 'How can manufacturers improve the environmental and economic performance of industrial ovens?' Research on industrial oven improvement is under-developed and there are significant improvement opportunities within many industrial-heating processes.
APA, Harvard, Vancouver, ISO, and other styles
3

Lindved, Erik, and Jakob Rolén. "Cost Engineering Strategies for Industrial Sourcing." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264049.

Full text
Abstract:
The art of estimating and managing costs is commonly referred to as cost engineering which is a vital tool to counteract cost uncertainty. Current research within the area mainly focuses on the cost estimation techniques themselves and the strategic implications have not yet been studied in-depth, nor been set into relation to traditional sourcing strategies. This study investigates how cost engineering should be used strategically within industrial sourcing. The research is conducted as a three-staged case study at a manufacturing company, including a qualitative part consisting of a literatu
APA, Harvard, Vancouver, ISO, and other styles
4

Mazzuto, Giovanni. "Fuzzy Cognitive Maps tools for Industrial Engineering." Doctoral thesis, Università Politecnica delle Marche, 2014. http://hdl.handle.net/11566/242871.

Full text
Abstract:
La tesi "Fuzzy Cognitive Maps tools for Industrial Engineering", riguarda la valutazione dell'applicazione di uno strumento quale la Mappa Cognitiva Fuzzy nell'ambito industriale. Ciò risiede nel fatto che, il suddetto strumento, nato nel settore delle scienze sociale, considera rilevante l'aspetto sociale ed umano associato ad un particolare problema. In tutti i problemi di ottimizzazione di un processo, o di risoluzione di un particolare problema, è possibile scegliere macchine che lavorino di più e meglio, oppure compiere azioni di correzione svariate, ma è necessario considerare che, chi
APA, Harvard, Vancouver, ISO, and other styles
5

Legner, Samuel, and Joel Ringbom. "Improving the Conventional Industrial WheelbarrowConventional Industrial Wheelbarrow." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-20108.

Full text
Abstract:
In collaboration with the construction company Skanska, a product intended to facilitate waste material transportation at construction sites was developed. The current solution, known as an industrial wheelbarrow, specializes in storing, transporting and disposing waste material. However, due to improper adaptation to human or machine use, this is frequently a problematic procedure causing time consuming countermeasures. The result of the development was therefore a solution adapted for both human and machine use in order to reduce resources required, which is uncommon on the current market.
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Xiao Qi. "Value optimization for engineering tasks." Thesis, McGill University, 2012. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=107913.

Full text
Abstract:
Great competition drives the widespread application of lean value in many industries. Value identification and product delivery is challenging due to the various concerns of shareholders, the large number of disparate tasks, and the complex resource allocation process. The overall goal of this research, then, is to develop a value focused optimization process adopting an enterprise perspective by investigating value identification, decision support and resource allocation. Firstly, a multiple-attribute model is proposed to identify value covering all the important aspects of the decision objec
APA, Harvard, Vancouver, ISO, and other styles
7

Hensel-Unger, Ralph. "Entwicklung einer Gestaltungssystematik für das Industrial Engineering (IE)." Doctoral thesis, Universitätsbibliothek Chemnitz, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-73876.

Full text
Abstract:
Unternehmen stehen vor der Herausforderung, effizient und kostengünstig zu produzieren. In diesem Zusammenhang kommt dem Industrial Engineering (IE) eine hohe Bedeutung zu, denn es besitzt das Potenzial zum ganzheitlichen Produktivitätsmanagement über den gesamten Produktentstehungs- und herstellungsrozess sowie alle Unternehmensbereiche. Dieses Potenzial wird zwar mittlerweile von einer Vielzahl von Unternehmen erkannt, jedoch kaum genutzt, was insbesondere in einem fehlenden Konzept für das ganzheitliche Industrial Engineering im Unternehmen begründet liegt. Daher wird ein fundamentales „Ree
APA, Harvard, Vancouver, ISO, and other styles
8

Wiberg, Anders. "Industrial design engineering study of PCM power plant." Thesis, KTH, Maskinkonstruktion (Inst.), 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-99317.

Full text
Abstract:
En studie av en mindre kraftstation har gjorts i samarbete med Exencotech som forskar inom energi-återvinning. Deras kraftstation behandlar återvinning av värme från uppvärmt vatten som annars inte hade använts utan ansetts som ren förlust. Den studie som genomförts har gjorts på ett 100kW system med en så stor möjlighet till modularitet som är möjligt för anpassning och flexibel installation. Studien har även innefattat en 5kW prototyp och en modulär version av 100kW systemet upp till 0,5MW. Applikationen har som krav att framför allt minska volymen och storleken på systemet. Studien innefatt
APA, Harvard, Vancouver, ISO, and other styles
9

Dimitriv, D., B. S. Deez, and A. E. Sonn. "Reverse engineering in industrial applications. A comparative study." Journal for New Generation Sciences, Vol 7, Issue 3: Central University of Technology, Free State, Bloemfontein, 2009. http://hdl.handle.net/11462/539.

Full text
Abstract:
Published Article<br>The development of innovative products and their realisation by means of advanced manufacturing methods and process combinations is more becoming a key issue in international competitiveness. The industrial production is subsequently influenced ever more by the possibilities that Rapid Technologies -Rapid Modelling and Reverse Engineering, Rapid Prototyping and Tooling, Rapid Manufacturing can offer. Reverse Engineering (RE) is the process of digitising a physical object to obtain computerised data for further development as opposed to manufacturing a product from a digita
APA, Harvard, Vancouver, ISO, and other styles
10

Eigner, Martin. "Das Industrial Internet – Engineering Prozesse und IT-Lösungen." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-214588.

Full text
Abstract:
Das Engineering unterliegt derzeit einem massiven Wandel. Smarte Systeme und Technologien, Cybertronische Produkte, Big Data und Cloud Computing im Kontext des Internet der Dinge und Dienste sowie Industrie 4.0. Der amerikanische Ansatz des „Industrial Internet“ beschreibt diese (R)evolution jedoch weitaus besser als der eingeschränkte und stark deutsch geprägte Begriff Industrie 4.0. Industrial Internet berücksichtigt den gesamten Produktlebenszyklus und adressiert sowohl Konsum- und Investitionsgüter als auch Dienstleistungen. Dieser Beitrag beleuchtet das zukunftsträchtige Trendthema und bi
APA, Harvard, Vancouver, ISO, and other styles
11

Morgan, Heather Dawn. "Industrial case study-driven innovative optimised engineering design." Thesis, Swansea University, 2015. https://cronfa.swan.ac.uk/Record/cronfa42659.

Full text
Abstract:
Optimisation research is a vast and comprehensive field of study in academia, but its application to complex real life problems is much more limited. This thesis presents an exploration into the use of optimisation in the weight reduction problems of three industrial case studies. The work sought to find robust and practical solutions that could be exploited in the current commercial environment. The three case studies comprised the housing of a vertical axis wind turbine, a titanium jet engine lifting bracket and a casing for an aircraft cargo release system. The latter two were to be built u
APA, Harvard, Vancouver, ISO, and other styles
12

Bjelkemyr, Marcus. "System of Systems Characteristics in Production System Engineering." Doctoral thesis, Stockholm : Skolan för industriell teknik och management, Kungliga Tekniska högskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10617.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Gorschek, Tony. "Software Process Assessment & Improvement in Industrial Requirements Engineering." Licentiate thesis, Ronneby : School of Engineering, Department of Systems and Software Engineering, Blekinge Institute of Technology, 2004. http://www.bth.se/fou/Forskinfo.nsf/allfirst2/d99bfd9efd34ee37c1256fac0038d53b?OpenDocument.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Phadke, Atul Arvind. "Introduction of programmable logic controller in industrial engineering curriculum." Morgantown, W. Va. : [West Virginia University Libraries], 2009. http://hdl.handle.net/10450/10318.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2009.<br>Title from document title page. Document formatted into pages; contains xi, 102 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 77-79). WVU users: Also available in print for a fee.
APA, Harvard, Vancouver, ISO, and other styles
15

CRISTOFARO, ANDREA. "Some Constrained Control Problems with Applications in Industrial Engineering." Doctoral thesis, Università degli Studi di Camerino, 2010. http://hdl.handle.net/11581/401924.

Full text
Abstract:
Handling constraints in control system design is an important issue in most, if not all, real world problems. On the other hand, it is generally true that higher levels of performance are associated with operating on, or near, constraint boundaries. Thus, a designer really cannot ignore constraints without incurring a performance penalty. Several constrained control problems have been treated in this thesis. In the framework of linear systems with saturating actuators three issues have been considered: unbounded invariant strips and stabilization by means of linear feedbacks, robust stabilizat
APA, Harvard, Vancouver, ISO, and other styles
16

RONDINI, ALICE. "Engineering and assessing Industrial Product-Service System (IPSS) solutions." Doctoral thesis, Università degli studi di Pavia, 2018. http://hdl.handle.net/11571/1227775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Mac, Garrigle Ellen F. "A validation of the enterprise management engineering approach to knowledge management systems engineering." Thesis, The George Washington University, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3614805.

Full text
Abstract:
<p> Knowledge management is one of the current "buzzwords" gaining popularity on an almost-daily basis within the business world. Much attention has been paid to the theory and justification of knowledge management (KM) as an effective business and organizational practice. However, much less attention has been paid to the more specific issues of effective <u>implementation</u> of knowledge management, or to the potential financial benefit or payoff that could potentially result from an effective system implementation. As the concept of KM becomes more generally accepted, knowledge management s
APA, Harvard, Vancouver, ISO, and other styles
18

Brusoni, Stefano. "The division of labour and the division of knowledge : the organisation of engineering design in the chemical industry." Thesis, University of Sussex, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.340829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Oltikar, Akhil Manohar. "Computer-Aided Engineering of Plywood Upholstered Furniture Frames." NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20001221-130641.

Full text
Abstract:
<p>Until the early 1900s, furniture was built by hand, one piece at a time. The industrial revolution and modern manufacturing technology has changed all of that. Today, as the furniture industry moves firmly into the next century, computerized systems and automated manufacturing have become more common to the industry. This thesis represents an effort to analyze the current practices in computer-aided design of upholstered furniture, specifically plywood frame furniture, and to develop new procedures for reducing the lead-time in upholstery product development. Different 3-D modeling techniqu
APA, Harvard, Vancouver, ISO, and other styles
20

Wagner, Thomas. "Agentenunterstütztes Engineering von Automatisierungsanlagen." [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-35254.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Panokarren, Clifford L. "Information model for engineering change management." FIU Digital Commons, 2004. https://digitalcommons.fiu.edu/etd/3949.

Full text
Abstract:
Managing engineering changes is a critical task for organizations to remain competitive. In a manufacturing organization there are innumerable engineering change requests. This thesis is focused on the development of an information model that defines the engineering change process. This research developed an activity model in IDEF0, an object model in IDEF1X and a dynamic model using state diagrams. The activity model captures the business process for executing an engineering change in terms of its constituting activities and sub-activities. The object model defines each object and its attribu
APA, Harvard, Vancouver, ISO, and other styles
22

Kyle, Stephen Alexander. "Triangulation methods in engineering measurement." Thesis, University College London (University of London), 1988. http://discovery.ucl.ac.uk/1318061/.

Full text
Abstract:
Industrial surveying and photogrammetry are being increasingly applied to the measurement of engineering objects which have typical dimensions in the range 2-100 metres. Both techniques are examples of the principle of triangulation. By applying photocrammetric concepts to surveying methods and vice-versa, a general approach is established which has a number of advantages. In particular. alternative strategies for constructing and analysing measurement networks are developed. These should help to strengthen the geometry and simplify the analysis. The primary results concern the use of non-leve
APA, Harvard, Vancouver, ISO, and other styles
23

May, John Hendy Robert. "Knowledge-based systems in engineering safety." Thesis, University of Bristol, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.327937.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Tran, Cong Thanh. "Network learning in global engineering services." Thesis, University of Birmingham, 2019. http://etheses.bham.ac.uk//id/eprint/8877/.

Full text
Abstract:
This study develops an integrated framework to improve understanding of network learning and value creation in global engineering services (GES). Network learning is the process that enhances firm performance through better knowledge and understanding. Prior research has developed GES network learning and value creation as a set of independent processes with customers, suppliers or intra-firm engineering units. Their practices have been fragmented, facilitating either inter- or intra-firm network learning and focusing on either GES efficiency or innovation. The absence of an integrated approac
APA, Harvard, Vancouver, ISO, and other styles
25

Rantanen, E. (Eetu). "Requirements engineering in agile software projects." Bachelor's thesis, University of Oulu, 2017. http://urn.fi/URN:NBN:fi:oulu-201705091721.

Full text
Abstract:
Many software projects are failed due to the delivery decisions that were made without adequate requirements information. In addition, the project management process including agile-oriented requirement management process has been identified as one of the four success factors in the agile software projects. Having the clear rules for requirements engineering is, therefore, an important thing for agile software projects from their success point of view. In this study, the objective is to analyze agile requirements engineering and to find out practices that are used in it. The goal is to define
APA, Harvard, Vancouver, ISO, and other styles
26

Nyman, Pontus, and Stefan Sand. "Industrial WLAN." Thesis, Malmö högskola, Fakulteten för teknik och samhälle (TS), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20340.

Full text
Abstract:
WLAN i form av standarden IEEE 802.11 används inte i större utsträckning i industriell miljö. Vi undersöker hur pass protokollet kan användas för datakommunikation i sådan miljö med avseende på störningskänslighet och datorkraftsbehov, i form av en empirisk undersökning. Dessa undersökningar har utförts på en industri med de tre vanligaste standarderna IEEE 802.11b/g/n. Syftet med denna uppsats är att kontrollera vad som stör signalerna samt om den nyaste standarden 802.11n har något nytt som kan revolutionera inriktningen. Tester och undersökningar har visat att 802.11b och 802.11n är bäst nä
APA, Harvard, Vancouver, ISO, and other styles
27

Espinoza-Gonzales, Javier-Jesús-Rolando, and Marco-Andrés Plasencia-Castro. "Estudio de prefactibilidad para la instalación de una planta procesadora de snacks rellenos y fritos." Bachelor's thesis, Universidad de Lima, 2017. http://repositorio.ulima.edu.pe/handle/ulima/4471.

Full text
Abstract:
El presente trabajo plantea la fabricación de snacks rellenos y fritos para ser comercializados en el actual mercado limeño a través de un proyecto de vida útil de seis años, desde 2017 hasta 2022. Como tal, se justifica técnicamente por la disponibilidad en el mercado de su materia prima, la masa tipo wantan, y sus principales insumos, jamonada y queso.. Económicamente, se justifica también, ya que estudios de productos similares presentan resultados favorables. Socialmente, contempla la importancia del trabajador, del consumidor final y del rol que, como empresa, cumple en la sociedad.<br>Tr
APA, Harvard, Vancouver, ISO, and other styles
28

Liu, Yun 1969. "A study of key mechanisms for concurrent engineering processes /." Thesis, McGill University, 2005. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=83872.

Full text
Abstract:
Previous studies (Bhuiyan, 2001; Bhuiyan et al., 2003; Jaafar, 2001) used stochastic computer models to study concurrent engineering (CE) processes. This thesis used the same models, but modified the two main mechanisms used in CE, that is, functional interaction and overlap, in order to better understand how they contribute to process performance, i.e., how they affect product development effort and span time. The present study used more realistic development processes over previous research in addition to using the same uncertainty conditions, rework, learning, and communication techn
APA, Harvard, Vancouver, ISO, and other styles
29

Dawson, Donald Wight 1956. "Maximizing customer satisfaction by optimal specification of engineering characteristics." Diss., The University of Arizona, 1997. http://hdl.handle.net/10150/282557.

Full text
Abstract:
The House of Quality (HOQ) has been widely discussed as a mechanism for capturing the Voice of the Customer and guiding the process of converting the customer's voice into internal engineering specifications. However, the discussion of this process to date has tended to be qualitative rather than quantitative. Various heuristic practices have evolved with little substantiation of their value or evaluation of their impact other than illustration in a few case studies. Examples of practices promoted by several authors and practitioners include the inclusion of the relative magnitude of effects,
APA, Harvard, Vancouver, ISO, and other styles
30

Gopinath, Varun. "Industrial Silo Optimization." Thesis, Linköpings universitet, Maskinkonstruktion, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-67645.

Full text
Abstract:
This thesis aims to build a working design-analyze-optimize methodology for Alstom Power Sweden AB at Växjö, Sweden. In order to be profitable in today’s competitive industrial product market, it is necessary to engineer optimized products fast. This involves CAD design and FEA analysis to work within an optimization routine in a seamless fashion which will result in a more profitable product. This approach can be understood as a model-based design, where the 3D CAD data is central to the product life cycle. The present approach provides many benefits to a company because of the use of a centr
APA, Harvard, Vancouver, ISO, and other styles
31

Garcia, Marelys L. "Autonomous Interpretation of Statistical Analysis For Engineering Decision Making." FIU Digital Commons, 1999. https://digitalcommons.fiu.edu/etd/3834.

Full text
Abstract:
Existing statistical software fails to explain the meaning of their output. Practicing engineers, in areas of application where statistics is heavily used, have to deal not only with the nuances of different statistical packages but also with learning what the results from their analyses mean. An Architecture and a prototype for a knowledge-based statistical output interpreter has been designed. CLIENS integrates different heterogeneous components and it uses object oriented design principles to enable modularity and package independence. Outputs from several statistical packages were analyzed
APA, Harvard, Vancouver, ISO, and other styles
32

TANKERSLEY, KARLA. "AN INDUSTRIAL ENGINEERING MODEL APPLYING THE BEHAVIOR-BASED SAFETY APPROACH." University of Cincinnati / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1196094394.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Hales, C. "Analysis of the engineering design process in an industrial context." Thesis, University of Cambridge, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.377194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Hinrichsen, Sven [Verfasser]. "Arbeitsrationalisierung mittels Methoden des Industrial Engineering in Dienstleistungsbetrieben / Sven Hinrichsen." Aachen : Shaker, 2007. http://d-nb.info/1164338994/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Queirós, Diogo Cerqueira. "Valorization of industrial residues through mixed microbial cultures eco-engineering." Doctoral thesis, Universidade de Aveiro, 2017. http://hdl.handle.net/10773/22465.

Full text
Abstract:
Doutoramento em Engenharia Química - Bioengenharia<br>Hoje em dia, há uma necessidade urgente de reinventar os processos industriais a partir dos quais a nossa sociedade subsiste, tornando-os mais sustentáveis. A União Europeia (UE) estabeleceu um conjunto de pacotes com medidas que abrangem todo o ciclo: desde a produção ao consumo e à gestão de resíduos, e quanto ao mercado de matérias-primas secundárias. Pretende-se, com isto, caminhar em direção a uma economia circular, dando um destino diferente a todos os resíduos gerados. Em Portugal, umas das maiores e principais atividades económicas
APA, Harvard, Vancouver, ISO, and other styles
36

Benjuma, Nuria Mahmud. "An educational framework to support industrial control system security engineering." Thesis, De Montfort University, 2017. http://hdl.handle.net/2086/15494.

Full text
Abstract:
Industrial Control Systems (ICSs) are used to monitor and control critical infrastructure such as electricity and water. ICS were originally stand-alone systems, but are now widely being connected to corporate national IT networks, making remote monitoring and more timely control possible. While this connectivity has brought multiple benefits to ICS, such as cost reductions and an increase in redundancy and flexibility, ICS were not designed for open connectivity and therefore are more prone to security threats, creating a greater requirement for adequate security engineering approaches. The c
APA, Harvard, Vancouver, ISO, and other styles
37

Zibi, Lindizwe Mthanjiswa. "Industrial brine characterisation and modelling." Master's thesis, University of Cape Town, 2010. http://hdl.handle.net/11427/11279.

Full text
Abstract:
Includes abstract.<br>Includes bibliographical references.<br>Industrial wastewater contains many soluble inorganic and organic components and solid particles. This study focused on inorganic industrial hypersaline brines. Chemical engineering presents a variety of mechanical, thermal, biological and chemical processes capable of treating hypersaline brines to the standard required by legislation. However, some of these technologies are inefficient, costly and outdated and are not applicable in solving modern brine accumulation problems.
APA, Harvard, Vancouver, ISO, and other styles
38

Hayden, Torrey Rahe Schenkenberger. "Wavelength Modulation Spectroscopy of Industrial Flame Systems." Thesis, University of Colorado at Boulder, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10928017.

Full text
Abstract:
<p> Combustion is widely used for materials processing, propulsion, and power production. Understanding the temporal and spatial variations within practical combustion systems can help to optimize their stability, uniformity, emissions, and/or efficiency. Wavelength modulation spectroscopy (WMS) provides quantitative, non-intrusive, time-resolved measurements of line-of-sight thermodynamic properties in a gas sample. This dissertation describes the development and application of novel WMS sensors for measurements in industrial flame environments. After an overview of WMS, we describe the deve
APA, Harvard, Vancouver, ISO, and other styles
39

Grice, Steven J. "Optical fibre sensors and their applications in the industrial weighing and aerospace industries." Thesis, Aston University, 2010. http://publications.aston.ac.uk/15208/.

Full text
Abstract:
This thesis presents the design, fabrication and testing of novel grating based Optical Fibre Sensor (OFS) systems being interrogated using “off the shelf” interrogation systems, with the eventual development of marketable commercial systems at the forefront of the research. Both in the industrial weighing and aerospace industries, there has been a drive to investigate the feasibility of using optical fibre sensors being deployed where traditionally their electrical or mechanical counterparts would traditionally have been. Already, in the industrial weighing industry, commercial operators are
APA, Harvard, Vancouver, ISO, and other styles
40

Puñal, Pereira Pablo. "Efficient IoT Framework for Industrial Applications." Doctoral thesis, Luleå tekniska universitet, EISLAB, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-95.

Full text
Abstract:
The use of low-power wireless sensors and actuators with networking support in in-dustry has increased over the past decade. New generations of microcontrollers, new hardware for communication, and the use of standardized protocols such as the Internet Protocol have resulted in more possibilities for interoperability than ever before. This in-creasing interoperability allows sensors and actuator nodes to exchange information with large numbers of peers, which is beneficial for creating advanced, flexible and reusable systems.The increase in interoperability has resulted in an increase in the num
APA, Harvard, Vancouver, ISO, and other styles
41

Ras, Cornelia. "An industrial ecology approach to salt-related environmental sustainability issues in a large industrial complex." Master's thesis, University of Cape Town, 2011. http://hdl.handle.net/11427/10737.

Full text
Abstract:
Includes sysnopsis.<br>Includes bibliographical references (p.93-106).<br>This thesis aims to demonstrate the application of industrial ecology (IE) theory to understand environmental sustainability problems relating to the accumulation of saline wastes and to study the potential for integrated technology interventions which take multi-party engagements and effects into account.
APA, Harvard, Vancouver, ISO, and other styles
42

Naboulsi, Samir K. "Modeling the manufacturing of industrial heterofilaments /." The Ohio State University, 1995. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487864485230503.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Coral, Melissa Patricia. "Analyzing Cognitive Workload Through Eye-related Measurements: A Meta-Analysis." Wright State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=wright1464209028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Bhuiyan, Farina. "Dynamic models of concurrent engineering processes and performance." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=38153.

Full text
Abstract:
Mathematical and stochastic computer models were built to simulate concurrent engineering processes (CE) in order to study how different process mechanisms contribute to new product development (NPD) performance. Micro-models of various phenomena which occur in concurrent engineering processes, such as functional participation, overlapping, decision-making, rework, and learning, were included, and their effects on the overall NPD process were related to process span time and effort. The study focused on determining under what conditions CE processes are more favorable than sequential processes
APA, Harvard, Vancouver, ISO, and other styles
45

Hedberg, Erik. "Control, Models and Industrial Manipulators." Licentiate thesis, Linköpings universitet, Reglerteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-171560.

Full text
Abstract:
The two topics at the heart of this thesis are how to improve control of industrial manipulators and how to reason about the role of models in automatic control. On industrial manipulators, two case studies are presented. The first investigates estimation with inertial sensors, and the second compares control by feedback linearization to control based on gain-scheduling. The contributions on the second topic illustrate the close connection between control and estimation in different ways. A conceptual model of control is introduced, which can be used to emphasize the role of models as well as
APA, Harvard, Vancouver, ISO, and other styles
46

Darlington, Mansur. "Cognition and the engineering design requirement." Thesis, University of Bath, 2002. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250822.

Full text
Abstract:
This thesis is concerned with the engineering design requirement and the process by which it is elicited, evolved and recorded. The purpose of the research reported in the work is to achieve a more complete understanding of the engineering design requirement, and to apply that understanding to the better support of designers during the design requirement capture phases of the design process. Two perspectives dominate the approach to the research. The first concerns the relation between the design process and human cognition. The research subject is seen as being fundamentally a product of the
APA, Harvard, Vancouver, ISO, and other styles
47

Mowrey, Corinne H. "An exploratory study of mixed-width aisle layouts for order picking in distribution centers." Wright State University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=wright1319334135.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Paul, Tiffany M. "Application of the Augmented Operator Function Model for Developing Performance Metrics in Persistent Surveillance." Wright State University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=wright1389657226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Ward, Kerry Kathleen. "A Framework for Centralizing Inventory in Pharmaceutical Supply Chains." Wright State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=wright1496159158415396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Conde, Ortiz Daniel. "Ethical Hacking Of An Industrial Control System." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-285573.

Full text
Abstract:
Almost no software is exempt of vulnerabilities. Penetration testing or ethicalhacking can be used to identify them. This thesis conducts a series of testsfollowing the penetration testing method on a large scale industrial controlsystem. The goal is to discover which kind of vulnerabilities exist in thesesystems, focusing on attacks from inside of their network. Several approacheswere taken in relation on how to attack the servers and services that form thenetwork, both from outside and inside the machines. Critical vulnerabilitieswere found in relation to using services unauthenticated and d
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography