Relevant bibliographies by topics / ENGINEERING, METALLURGY

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'ENGINEERING, METALLURGY'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'ENGINEERING, METALLURGY.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "ENGINEERING, METALLURGY"

1

Harris, J. "Engineering metallurgy: Part 1 Applied physical metallurgy." International Materials Reviews 39, no. 5 (January 1994): 213–14. http://dx.doi.org/10.1179/imr.1994.39.5.213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Preston, R. A. "Engineering in Process Metallurgy." Journal of Materials Processing Technology 23, no. 1 (October 1990): 73–74. http://dx.doi.org/10.1016/0924-0136(90)90125-e.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Abraham, Sunday, Rick Bodnar, Justin Raines, and Yufeng Wang. "Inclusion engineering and metallurgy of calcium treatment." Journal of Iron and Steel Research International 25, no. 2 (February 2018): 133–45. http://dx.doi.org/10.1007/s42243-018-0017-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Heimala, Seppo. "Extraction metallurgy." International Journal of Mineral Processing 35, no. 1-2 (June 1992): 147–48. http://dx.doi.org/10.1016/0301-7516(92)90010-t.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Thornber, Mike R. "Process metallurgy, vol. 8. Extractive metallurgy of vanadium." International Journal of Mineral Processing 38, no. 1-2 (May 1993): 153–54. http://dx.doi.org/10.1016/0301-7516(93)90071-h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kunanbaeva, Kymbat, Saule Rahimova, and Andrey Pigurin. "The role of metallurgical clusters in the development of environmental engineering: new opportunities." E3S Web of Conferences 164 (2020): 01031. http://dx.doi.org/10.1051/e3sconf/202016401031.

Full text
Abstract:
This paper discusses the place and role of metallurgical clusters in the development of environmental engineering. The paper is based on research materials on the development of environmental engineering and the features of the functioning of metallurgical clusters. The paper studies the development of ferrous metallurgy, development trends, and developmental features of city-forming organizations of ferrous metallurgy. The main existing areas for development of metallurgical clusters and the relevance of environmental engineering development are shown.
APA, Harvard, Vancouver, ISO, and other styles
7

Readey, D. W. "Specific Materials Science and Engineering Education." MRS Bulletin 12, no. 4 (June 1987): 30–33. http://dx.doi.org/10.1557/s0883769400067762.

Full text
Abstract:
Forty years ago there were essentially no academic departments with titles of “Materials Science” or “Materials Engineering.” There were, of course, many materials departments. They were called “Metallurgy,” “Metallurgical Engineering,” “Mining and Metallurgy,” and other permutations and combinations. There were also a small number of “Ceramic” or “Ceramic Engineering” departments. Essentially none included “polymers.” Over the years titles have evolved via a route that frequently followed “Mining and Metallurgy,” to “Metallurgical Engineering,” to “Materials Science and Metallurgical Engineering,” and finally to “Materials Science and Engineering.” The evolution was driven by recognition of the commonality of material structure-property correlations and the concomitant broadening of faculty interests to include other materials. However, the issue is not department titles but whether a single degree option in materials science and engineering best serves the needs of students.Few proponents of materials science and engineering dispute the necessity for understanding the relationships between processing (including synthesis), structure, and properties (including performance) of materials. However, can a single BS degree in materials science and engineering provide the background in these relationships for all materials and satisfy the entire market now served by several different materials degrees?The issue is not whether “Materials Science and Engineering” departments or some other academic grouping of individuals with common interests should or should not exist.
APA, Harvard, Vancouver, ISO, and other styles
8

Hueckel, Theodore, and Stefano Sacanna. "Colloidal metallurgy." Nature Chemistry 13, no. 6 (June 2021): 514–15. http://dx.doi.org/10.1038/s41557-021-00723-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Halasi, Tibor, Snezana Kalamkovic, and Stanko Cvjeticanin. "Academic roots of chemical engineering in XVIII and XIX century in middle Europe." Chemical Industry 64, no. 2 (2010): 157–63. http://dx.doi.org/10.2298/hemind091120004h.

Full text
Abstract:
Roots of chemical engineering in Middle Europe lead to the first mining and metallurgy academies, established in VIII century in Upper Hungaria and in Bohemian Kingdom. Chemical engineering skills originate from ancient Egyptian handicraft, alchemy, technical chemistry, pneumochemistry and phlogiston chemistry. Development of mining and metallurgy coincided with great scientific discoveries and industrial revolution. In Middle Europe, the first such academies were opened in St. Joachimstahl and in Schemnitz, and the first Serbian mining engineers Djordje Brankovic, Vasilije Bozic and Stevan Pavlovic studied, as well as the first chemistry professor of the High School in Belgrade, Mihajlo Raskovic. Eminent professors were employed by the Schemnitz academy, such as: Nicol Jacquin, Giovanni Scopoli, Ignaz von Born and Christian Doppler. It is important to emphasize that Shemnitz practiced the first modern, practical laboratory education. In VIII century, Schemnitz Mining and metallurgy academy was the most contemporary educational insistution for engineers. However, in XIX century, mining and metallurgy academies stagnated, due to the replacement of professional academies with polytechnic schools, technical universities and scientific research institutes.
APA, Harvard, Vancouver, ISO, and other styles
10

Warner, N. A. "Extraction metallurgy '89." Minerals Engineering 2, no. 3 (January 1989): 437. http://dx.doi.org/10.1016/0892-6875(89)90015-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "ENGINEERING, METALLURGY"

1

Govan, Premesh. "Manipulating aqueous chemistry environments in extractive metallurgy." Master's thesis, University of Cape Town, 2010. http://hdl.handle.net/11427/10529.

Full text
Abstract:
The Anglo Research Nickel (ArNi) process is a novel extractive metallurgical process that arose out of the need to develop a processing route for the recovery of nickel from lateritic ore deposits that is both economical and environmentally acceptable.
APA, Harvard, Vancouver, ISO, and other styles
2

Fei, Hong Tao. "Intercritical rolling of a Nb-bearing trip steel." Thesis, McGill University, 2003. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=19663.

Full text
Abstract:
Many engineering materials call for increasing strength and ductility. Unfortunately, the material properties of high ductility and high strength are usually mutually contradictory. These conflicting requirements have generated interest in transformation induced plasticity or TRIP steels, which mainly consist of a mixture bainite, ferrite and retained austenite. The superior strength and ductility of these types of steels is due to the strain induced transformation of retained austenite to martensite. Intercritical deformation (i.e. deformation in the austenite + ferrite two phase region) has been extensively studied on C-Mn and microalloyed steels, but not on TRIP steels. Intercritical rolling increases the volume fraction and decreases the grain size of ferrite. These characteristics may be beneficial to the ductility of TRIP steels, since the volume fraction of retained austenite may increase with ferrite volume fraction by increasing the level of C segregation to the untransformed austenite. As well, the size of the retained austenite may decrease with decreasing ferrite grain size, thus increasing the stability of retained austenite against strain induced transformation. The aim of this study was to investigate the effect of the intercritical deformation on the characteristics of retained austenite and resulting mechanical properties of a TRIP steel.
APA, Harvard, Vancouver, ISO, and other styles
3

Williams, Katherine E. (Katherine Edith). "An examination of Maya metallurgy, 1150 to 1544 A.D." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/32576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kilic, Arif Nesimi 1963. "A multi-region transient erosion model for concrete with time-dependent surface heat flux." Diss., The University of Arizona, 1996. http://hdl.handle.net/10150/290695.

Full text
Abstract:
A multi-region, transient concrete ablation and decomposition model is developed. The model consists of four regions of concrete containing a thermally affected region, a dry (evaporated and chemically dehydrated) region, and a gas-free (decarboxylated) region with ablated concrete at the melt/concrete interface. Each region has an interface where the latent heat of local decomposition reactions is taken into account as heat sinks due to endothermic characteristics of the reactions. The time dependent temperature profiles, and depth and growth rate of the regions are evaluated by use of the heat balance integral method. Solutions are obtained for surface heat fluxes in forms of constant, e ⁻(λ)ᵗ, t⁻(λ) and -At to analyze various melt cooldown schemes. The erosion front progresses with a constant rate proportional to the surface heat flux in case of constant heat flux, and terminates at a finite erosion depth that is logarithmically proportional to the cooldown rate for surface heat flux in forms of ⁻(λ)ᵗ and t⁻(λ). Sensitivity analyses are performed to investigate the effects of important thermophysical parameters. Larger erosion depth and rate is observed for higher thermal conductivity. Decomposition temperatures are found to be significant in ablation. Model results were compared with previous experiments and models, and determined to be valid and accurate for different types of melt/concrete interaction. The model presented in this study is simple yet very detailed and accurate in simulating the actual molten core/concrete interaction (MCCI) phenomena, and in investigating the concrete reaction to the molten core. It not only can be embodied into the MCCI codes currently being developed, but also can be used to determine the containment integrity, and fission products released into the environment and to the public as a stand alone code.
APA, Harvard, Vancouver, ISO, and other styles
5

Krishnaswamy, Sampath. "Weldability of a rapid solidification/powder metallurgy Al-8Fe-2Mo alloy /." The Ohio State University, 1989. http://rave.ohiolink.edu/etdc/view?acc_num=osu148759874801883.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sundaresh, Shlok. "A Mesoscopic Approach Towards Modeling of Compaction Process in Powder Metallurgy." The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1406225280.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bulpett, Robert. "The characterisation of white-etching layers formed on engineering steels." Thesis, Brunel University, 1991. http://bura.brunel.ac.uk/handle/2438/4326.

Full text
Abstract:
Metal surfaces, and particularly steels, may be modified by processes which include; plastic-deformation, chemical changes and heating. These layers are often characterised by high hardness and a pronounced resistance to chemical etching. This latter characteristic giving rise to the generically descriptive term "White Layer", which is often applied to such features. Processes which may result in the formation of "White Layer" can be broadly separated into three groups; thermal, chemical and mechanical. In practice, "White Layers" observed on materials removed from service environments have generally experienced a combination of these processes. In this work white-etching layers formed on engineering steels have been characterised, using a variety of electron beam and X-ray analytical techniques, to establish the chemical nature and structural properties of "white layer" material. Specimens drawn from such diverse service applications as; high-pressure tank gun barrels, digger-teeth from gravel extraction plant and adiabatically-sheared armour steel have been compared with samples produced in the laboratory by conventional pin-on-disc wear testing apparatus, specialised machining techniques and laser surface-hardening heat-treatment. The presence of a hard white-etching layer on each of the samples was first established using metallographic examination by light microscopy and microhardness testing to confirm the etch-resistance and high hardness of the white-layer. The chemical composition of the whiteetching layer was then compared with the bulk steel composition using scanning electron microscopy and conventional microprobe analysis ( Z > 11 ), and no significant differences were observed. Light element microprobe analysis and SIMS showed an increase in H, C, N, 0 in the white-etching layers formed within gun barrels, and on abusively turned steel. The levels detected were not considered to be significant in terms of white-layer formation but may well have an influence on strain aging and embrittlement phenomena. A technique for the preparation of cross-sectional thin foils was developed which allowed the structure of the white-etching layers to be compared with the underlying matrix by TEM and electron diffraction. The results of this study showed clear similarities between white-etching layers formed by wear and abusive machining and those formed by adiabatic shear. From these results it is concluded that " white layer " is a fine grain martensite which forms on steel as a result of thermo-mechanical transformation.
APA, Harvard, Vancouver, ISO, and other styles
8

Ero-Phillips, Olubayode Oladiran. "Development of bi- and multicomponent fibres for tissue engineering by electrospinning." Thesis, University of Birmingham, 2012. http://etheses.bham.ac.uk//id/eprint/3587/.

Full text
Abstract:
This project investigated the possibility of tailoring the crystallinity of electrospun fibres (crystallinity studies), and the electrospinning of bi- and multicomponent scaffolds of PLLA. During the crystallinity studies, the effects of various electrospinning process parameters on the crystallinity of electrospun poly(L-lactic acid) (PLLA) fibres were investigated. It was observed that the electrospun fibres had crystallinities between 23 and 46% while that for the as-received granule was 37%, suggesting that the crystallinity of electrospun fibres can be controlled by optimizing the electrospinning process. These results showed that the degree of crystallinity of the electrospun fibres decreased with increasing the polymer solution concentration. Furthermore, an optimum electrospinning voltage at which the maximum degree of crystallinity can be obtained was observed. Finally, bi-component scaffolds based on PLLA and gelatin were electrospun. Multicomponent scaffolds based on PLLA, gelatin and hydroxyapatite (HA) were electrospun followed by electrospraying of the HA phase. Blending gelatin with PLLA resulted in an approximate 50% decrease in fibre diameter. Biocompatibility studies revealed that all scaffolds permitted cell attachment with best results observed on the PLLAGel-HA scaffolds. This was attributed to the exposed HA particles on the surface of the PLLAGel-HA scaffolds which promoted better binding with integrins for osteoconductivity.
APA, Harvard, Vancouver, ISO, and other styles
9

Kim, Hyoungbae 1969. "Physical modelling of two phase flows in ladle-shroud systems." Thesis, McGill University, 1998. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=20914.

Full text
Abstract:
The onset of a 'late' rotating vortex over an off-centre drain nozzle at 2/3 radius was studied in an 1160-mm diameter tank. It was found that using a sloped bottom ladle could be beneficial in terms of steel yield, provided the exit nozzle is located 'centrically'.
Miner modification of the nozzle (skewed nozzle) to impart a radial component of velocity to the spinning vortex core was found to be effective in making AMEPA system sensitive to early slag entrainment phenomena by diverting the core away from the central vertical axis of the nozzle.
A 0.75 scale water model was constructed to simulate the flow of liquid steel through a ladle shroud in the presence of gas infiltration. It was found that the ladle shroud slag detector could be temporarily 'blinded' by gas bubbles or permanently blinded by a standing submerged gas jet.
APA, Harvard, Vancouver, ISO, and other styles
10

Sum, Maisie. "Variant selection during the austenite-to-martensite transformation." Thesis, McGill University, 1998. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=21328.

Full text
Abstract:
Variant selection rules are described that predict the austenite-to-mariensite transformation textures of an Fe-30% Ni alloy. The occurrence of variant selection is explained in detail using the crystal plasticity model of Bishop and Hill and the Kurdjumov-Sachs transformation relationship. A correlation is established between the slip systems of the former and the rotation axes of the latter. The selection criteria are based on a combination of slip activity, that is, active slip systems defined in terms of positive shears, and permissible dislocation reactions. Thus some of the variants selected are associated with slip systems that are active, while the remainder are accounted for by the in-plane reaction of active dislocations to form inactive or unstressed dislocations. The variant selection criteria are tested against two strain paths; plane strain rolling and axisymmetric compression. Extensive studies were conducted on the former strain path and revealed excellent agreement between the measured and predicted transformation textures. A more detailed analysis is still required for the axisymmetric compression strain path, although, the results obtained indicate that the variant selection model does indeed generate a transformation texture that is consistent with the experimental one.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "ENGINEERING, METALLURGY"

1

Engineering metallurgy. Sevenoaks: Edward Arnold, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Higgins, Raymond Aurelius. Engineering metallurgy. 6th ed. London: E. Arnold, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Engineering in process metallurgy. Oxford: Clarendon, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Guthrie, R. I. L. Engineering in process metallurgy. Oxford: Clarendon Press, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Guthrie, R. I. L. Engineering in process metallurgy. Oxford: Clarendon Press, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Doig, Alistair. Military metallurgy. London: IOM Communications, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

service), ScienceDirect (Online, ed. Wire technology: Process engineering and metallurgy. Amsterdam: Elsevier, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Welding Metallurgy of Stainless Steels. Vienna: Springer Vienna, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yin, Ruiyu. Metallurgical Process Engineering. Berlin, Heidelberg: Metallurgical Industry Press,Beijing and Springer-Verlag Berlin Heidelberg and Metallurgical Industry Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Smallman, R. E. Modern physical metallurgy and materials engineering: Science, process, applications. 6th ed. Oxford: Butterworth Heinemann, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "ENGINEERING, METALLURGY"

1

Post, Daniel, Bongtae Han, and Peter Ifju. "Metallurgy, Fracture, Dynamic Loading." In Mechanical Engineering Series, 369–89. New York, NY: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4612-4334-2_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jiang, Xun Xiong, and Linyong Feng. "Mineral Processing and Metallurgy." In Encyclopedia of Ocean Engineering, 1–11. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-10-6963-5_98-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dwivedi, Dheerendra Kumar. "Surface Engineering by Changing the Surface Metallurgy." In Surface Engineering, 73–90. New Delhi: Springer India, 2018. http://dx.doi.org/10.1007/978-81-322-3779-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lahiri, Amiya Kumar. "Classification of Metallic Engineering Materials." In Applied Metallurgy and Corrosion Control, 17–39. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4684-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ayers, Reed A., Evalina Levina Burger, Christopher J. Kleck, and Vikas Patel. "Metallurgy of Spinal Instrumentation." In Springer Series in Biomaterials Science and Engineering, 53–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46836-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Freese, Howard L., Michael G. Volas, and J. Randolph Wood. "Metallurgy and Technological Properties of Titanium and Titanium Alloys." In Engineering Materials, 25–51. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-56486-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yin, Ruiyu. "Analysis and Integration of Manufacturing Process of Metallurgy." In Metallurgical Process Engineering, 87–114. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-13956-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hwang, Chul Jin, Y. B. Ko, Hyung Pil Park, S. T. Chung, and Byung Ohk Rhee. "Computer Aided Engineering Design of Powder Injection Molding Process for a Dental Scaler Tip Mold Design." In Progress in Powder Metallurgy, 341–44. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.341.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rabenberg, L. "Metallurgy of Permanent Magnet Alloys: Recent Developments." In Advanced Topics in Materials Science and Engineering, 169–86. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2842-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wu, Yan Qing, Li Sha Niu, Ping An Shi, Jun Mo, and Hui Ji Shi. "Fatigue Property for the Powder Metallurgy Beryllium-Aluminum Composite Materials." In Key Engineering Materials, 207–10. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.207.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "ENGINEERING, METALLURGY"

1

"Mining production, mechanical engineering and metallurgy." In 2007 International Forum on Strategic Technology. IEEE, 2007. http://dx.doi.org/10.1109/ifost.2007.4798629.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Session 2: Mining production, mechanical engineering and metallurgy - I." In 2007 International Forum on Strategic Technology. IEEE, 2007. http://dx.doi.org/10.1109/ifost.2007.4798520.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Session 7: Mining production, mechanical engineering and metallurgy - II." In 2007 International Forum on Strategic Technology. IEEE, 2007. http://dx.doi.org/10.1109/ifost.2007.4798565.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Togwe, T., S. V. Atre, J. A. Thomas, A. J. Kuhar, J. Joys, and R. M. German. "Production Tooling from Powder Metallurgy: Opportunities and Limitations." In International Body Engineering Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-2729.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dhoka, Sahil, Scott W. Wagner, Himansshu Abhi, Nicholas V. Hendrickson, and William J. Emblom. "Integrating Friction-Stir Back Extrusion to Powder Metallurgy." In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-64052.

Full text
Abstract:
Abstract Reducing fuel consumption has been a driving factor for researchers and manufacturers to continually develop improved methods for reducing the weight of automobiles or lightweighting. These vehicle lightweighting demands have directed researchers to look to using materials that are typically more difficult to manufacture in their studies. As a result, friction stir processing techniques are being looked at more closely. There are advantages to using friction stir methods. Dissimilar metals can be welded and fine-grained products can be created using friction stir methods to name a few. It can be an ideal solution for manufacturing high-conductive metals and alloys. Foamed aluminum tube similar to the one shown by Yoshiko Hangai et al [1] can be formed using the proposed process which could be used to develop lightweight automobile components. This paper provides preliminary results and insights gained when fine metal powders were used in a friction stir back extrusion (FSBE) setup. The tooling consisted of a D2 tool steel die with an H13 rotating probe mounted in a CNC mill. Within the die, commercially pure aluminum powder was topped by an aluminum cap with a milled pocket in the center. This pocket was used to locate the spin tool in the center of the cap and reduce the potential for the tool to drift and deflect. The cap was also used for compacting the powdered aluminum. X-ray diffraction indicated that Al13Fe4 was formed, indicating that the temperature within the die reached a minimum of 800°C and also indicated that the powder had the potential to partially sinter and melt.
APA, Harvard, Vancouver, ISO, and other styles
6

Milligan, David, Ulf Engström, and Ryu Goto. "Powder Metallurgy for High Performance Engine and Transmission Applications." In SAE Commercial Vehicle Engineering Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2004. http://dx.doi.org/10.4271/2004-01-2677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hayka Vieira, Hayka Cristina, Thailler Machado Nunes da Silva, Sergio Soares, and Alexandra de Oliveira França Hayama. "EXPLORATORY STUDY OF Ti-35Nb OBTAINED BY POWDER METALLURGY." In 25th International Congress of Mechanical Engineering. ABCM, 2019. http://dx.doi.org/10.26678/abcm.cobem2019.cob2019-1904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Goh, C. S., J. Wei, and M. Gupta. "A Comparison of the Processing Routes on the Properties of Mg Reinforced With Nanosize MgO." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10570.

Full text
Abstract:
Powder metallurgy and liquid metallurgy techniques were used to fabricate Mg reinforced with different volume fraction of nano-size MgO particles. A higher volume fraction of MgO particles could be added into the Mg matrix when the liquid metallurgy technique was used. Microstructural analysis was carried out to examine the distribution of the nanoparticles in the Mg matrix when different processing routes were chosen. Individual particles together with sparsely distributed agglomerations could be discerned in the Mg matrix for both processing routes. Mechanical properties results revealed that a more substantial improvement in macrohardness and tensile properties could be achieved by using the liquid metallurgy route where a higher amount of nano-size MgO particles could be incorporated.
APA, Harvard, Vancouver, ISO, and other styles
9

Amal, M. Ikhlasul, Dhyah Annur, Franciska P. Lestari, Cahya Sutowo, and Ika Kartika. "Processing of porous Mg-Zn-Ca alloy via powder metallurgy." In PROCEEDINGS OF THE INTERNATIONAL MECHANICAL ENGINEERING AND ENGINEERING EDUCATION CONFERENCES (IMEEEC 2016). Author(s), 2016. http://dx.doi.org/10.1063/1.4965744.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Babaghorbani, P., and M. Gupta. "Effect of Processing Methodology on Microstructure and Mechanical Properties of Sn-3.5Ag Solder." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-66308.

Full text
Abstract:
The manufacturing techniques of powder metallurgy and casting were used to synthesize a Sn-3.5Ag followed by hot extrusion. In the sintering step of powder metallurgy, two routes of conventional and microwave sintering were investigated. Physical, microstructural, thermomechanical and mechanical properties of the developed solders were examined. These studies revealed that the best combination of the properties is realized from the Sn-3.5Ag synthesized using powder metallurgy incorporating microwave sintering route. An attempt is made to correlate processing-microstructure-properties relationship for Sn-3.5Ag.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "ENGINEERING, METALLURGY"

1

Pugh, E. N., and J. G. early. Institute for Materials Science and Engineering metallurgy :. Gaithersburg, MD: National Bureau of Standards, 1985. http://dx.doi.org/10.6028/nbs.ir.85-3191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'ENGINEERING, METALLURGY' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography