Relevant bibliographies by topics / Enhanced heat transfer

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Enhanced heat transfer'

Author: Grafiati
Published: 4 June 2021
Last updated: 16 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Enhanced heat transfer.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Enhanced heat transfer"

1

Qian, H., S. Kudashev, and V. Plotnikov. "Pulsating Enhanced Heat Transfer." Bulletin of Science and Practice 5, no. 8 (2019): 70–80. http://dx.doi.org/10.33619/2414-2948/45/08.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

ROSE, John Winston. "Enhanced Condensation Heat Transfer." JSME International Journal Series B 49, no. 3 (2006): 626–35. http://dx.doi.org/10.1299/jsmeb.49.626.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gorenflo, D. "Enhanced boiling heat transfer." International Journal of Refrigeration 14, no. 4 (1991): 246. http://dx.doi.org/10.1016/0140-7007(91)90011-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Reay, D. A. "Enhanced boiling heat transfer." Heat Recovery Systems and CHP 11, no. 1 (1991): 99. http://dx.doi.org/10.1016/0890-4332(91)90192-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gorentio, D. "Enhanced boiling heat transfer." Chemical Engineering and Processing: Process Intensification 29, no. 1 (1991): 62–63. http://dx.doi.org/10.1016/0255-2701(91)87011-q.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Qian, H., S. Kudashev, and V. Plotnikov. "Plotnikov V. Pulsating Enhanced Heat Transfer." Bulletin of Science and Practice 5, no. 8 (2019): 70–80. https://doi.org/10.33619/2414-2948/45/08.

Full text
Abstract:
The paper mainly introduces the mechanism of turbulent fluid heat transfer enhancement and the factors affecting heat transfer. The physical parameters of pulsating fluid mainly include pulsation frequency and amplitude. The factors affecting heat transfer are the physical properties of the pulsating fluid and the installation of a pulsation generator. The position, the type of pulsation occurrence, the natural frequency of the heat exchange system, etc.; the methods for strengthening the pulsating heat transfer characteristics mainly include disturbing flow elements, changing the size of the flow channel structure, compound heat transfer enhancement, and setting the induction vibration device in the flow channel.
APA, Harvard, Vancouver, ISO, and other styles
7

Kukulka, David J., and Rick Smith. "Heat transfer evaluation of an enhanced heat transfer tube bundle." Energy 75 (October 2014): 97–103. http://dx.doi.org/10.1016/j.energy.2014.04.113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Douglas, Zachary, Thomas R. Boziuk, Marc K. Smith, and Ari Glezer. "Acoustically enhanced boiling heat transfer." Physics of Fluids 24, no. 5 (2012): 052105. http://dx.doi.org/10.1063/1.4721669.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Auracher, H. "Principles of Enhanced Heat Transfer." International Journal of Refrigeration 18, no. 8 (1995): 565. http://dx.doi.org/10.1016/0140-7007(95)90013-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lightfoot, E. N. "Principles of enhanced heat transfer." Chemical Engineering Science 50, no. 18 (1995): 3007. http://dx.doi.org/10.1016/0009-2509(95)90009-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Enhanced heat transfer"

1

Douglas, Zachary W. "Acoustically Enhanced Boiling Heat Transfer." Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/16325.

Full text
Abstract:
An acoustic field is used to increase the critical heat flux of a copper boiling heat transfer surface. The increase is a result of the acoustic effects on the vapor bubbles. Experiments are being performed to explore the effects of an acoustic field on vapor bubbles in the vicinity of a rigid heated wall. Work includes the construction of a novel heater used to produce a single vapor bubble of a prescribed size and at a prescribed location on a flat boiling surface for better study of an individual vapor bubble s reaction to the acoustic field. Work also includes application of the results from the single bubble heater to a calibrated copper heater used for quantifying the improvements in critical heat flux.
APA, Harvard, Vancouver, ISO, and other styles
2

Pathak, Sayali V. "Enhanced Heat Transfer in Composite Materials." Ohio University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1368105955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Paxson, Adam Taylor. "Advanced materials for enhanced condensation heat transfer." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/92168.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2014.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 147-164).<br>This thesis investigates the use of three classes advanced materials for promoting dropwise condensation: 1. robust hydrophobic functionalizations 2. superhydrophobic textures 3. lubricant-imbibed textures We first define the functional requirements of a hydrophobic functionalization for promoting dropwise condensation and use these guidelines to investigate two subclasses of materials: rare-earth ceramics and fluoropolymer films deposited via initiated chemical vapor deposition (iCVD). We show how both materials exhibit robust dropwise behavior, and further subject an iCVD film to an accelerated endurance trial to show how it sustains dropwise condensation throughout a 3-month equivalent trial. Next we combine hydrophobic functionalization with rough texture to obtain superhydrophobic surfaces and identify a self-similar depinning mechanism governing adhesion on surfaces with multiple roughness length scales. We introduce the metric of pinned fraction to show how these surfaces must be designed to minimize adhesion. We then show how dropwise condensation on superhydrophobic surfaces and the ensuing "jumping" behavior consists of not only binary coalescences, but multiple-drop coalescences with tangential departure that result in increased departing mass flux. However, we find that although this mode of condensation is readily achievable when condensing working fluids with high surface tension, such as water, even re-entrant structures that are known to support millimetric droplets of low-surface tension liquids in a superhydrophobic state are not sufficient to promote the dropwise mode of condensation for working fluids with low surface tension. Finally, we extend the applicability of textured surfaces by imbibing solid textures with a lubricant stabilized by capillary wicking. We show how these surfaces, when both solid texture and lubricant are properly designed, can promote dropwise condensation and reduce departing diameter of not only steam, but also of low-surface tension working fluids. In summary, we find that all three classes of surfaces provide significant increases in vapor-side heat transfer coefficient. However, when considering the overall heat transfer coefficient of a surface condenser, we find that most of the benefits of dropwise condensation can be realized by hydrophobic functionalization.<br>by Adam T. Paxson.<br>Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
4

Cooper, Paul. "Electrically enhanced heat transfer in the shell/tube heat exchanger." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/37978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Glober, S. "Flow and heat transfer inside enhanced performance tubes." Thesis, University of Brighton, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373908.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cho, Han-Jae Jeremy. "Physicochernical mechanics of surfactant-enhanced boiling heat transfer." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/110890.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2017.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 175-185).<br>Boiling-employed in a variety of industrial and domestic processes such as in power stations, heating/cooling systems, and desalination plants-is involved with a major portion of the world's energy usage. Its substantial utility can be attributed to moving a large quantity of heat over small temperature differences. However, even these small temperature differences can have implications on energy efficiency, device lifetime, and performance. Surfactants, which are molecules that have hydrophobic and hydrophilic components, are known to enhance boiling by changing the way bubbles nucleate on the surface, grow, and depart from the surface. This thesis provides a mechanistic understanding of surfactant enhanced boiling from molecular and macroscopic perspectives with theory and experiments. First, a statistical mechanical model to predict equilibrium and dynamic surface tension from molecular parameters is introduced and experimentally verified. Then, models of bubble nucleation, growth, and departure are developed, taking into account the time-dependent nature of surfactant adsorption processes. From there, models are combined so as to predict the enhancement in boiling performance based primarily on molecular information of the surfactant. Pool boiling experiments conducted with a variety of surfactants have shown agreement with model predictions. With the framework presented in this thesis, large-head and long-tail surfactants were found to be desirable. However, suitable surfactants for specific needs can now be identified, which can aid in the further adoption of surfactants in practice. Finally, using insights gained about the importance of solid-liquid adsorption over liquid-vapor adsorption, a novel method of using electric fields to control surfactant adsorption wherein bubbles can be turned "on" and "off" is demonstrated. Furthermore, an ability to control boiling spatially in addition to temporally is shown. This active control of boiling can improve performance and flexibility in existing boiling technologies as well as enable emerging or unprecedented thermal applications.<br>by Han-Jae Jeremy Cho.<br>Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Xiaolin. "A numerical study of vorticity-enhanced heat transfer." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/54017.

Full text
Abstract:
In this work, we have numerically studied the effect of the vorticity on the enhancement of heat transfer in a channel flow. In the first part of the work, we focus on the investigation of a channel flow with a vortex street as the incoming flow. We propose a model to simulate the fluid dynamics. We find that the flow exhibits different properties depending on the value of four dimensionless parameters. In particularly, we can classify the flows into two types, active and passive vibration, based on the sign of the incoming vortices. In the second part of the work, we discuss the heat transfer process due to the flows just described and investigate how the vorticity in the flow improves the efficiency of the heat transfer. The temperature shows different characteristics corresponding to the active and passive vibration cases. In active vibration cases, the vortex blob improves the heat transfer by disrupting the thermal boundary layer and preventing the decay of the wall temperature gradient throughout the channel, and by enhancing the forced convection to cool down the wall temperature. The heat transxfer performance is directly related to the strength of the vortex blobs and the background flow. In passive vibration cases, the corresponding heat transfer process is complicated and varies dramatically as the flow changes its properties. We also studied the effect of thermal parameters on heat transfer performance. Finally, we propose a more realistic optimization problem which is to minimize the maximum temperature of the solids with a given input energy. We find that the best heat transfer performance is obtained in the active vibration case with zero background flow.
APA, Harvard, Vancouver, ISO, and other styles
8

Glavin, Nicholas R. "Photonically Enhanced and Controlled Pool Boiling Heat Transfer." University of Dayton / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1343401685.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Huzayyin, Omar A. "Computational Modeling of Convective Heat Transfer in Compact and Enhanced Heat Exchangers." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1313754781.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rastan, Hamidreza. "Investigation of the heat transfer of enhanced additively manufactured minichannel heat exchangers." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264278.

Full text
Abstract:
Mini-/microchannel components have received attention over the past few decades owing to their compactness and superior thermal performance. Microchannel heat sinks are typically manufactured through traditional manufacturing practices (milling and sawing, electrodischarge machining, and water jet cutting) by changing their components to work in microscale environments or microfabrication techniques (etching and lost wax molding), which have emerged from the semiconductor industry. An extrusion process is used to produce multiport minichannel-based heat exchangers (HXs). However, geometric manufacturing limitations can be considered as drawbacks for all of these techniques. For example, a complex out-of-plane geometry is extremely difficult to fabricate, if not impossible. Such imposed design constraints can be eliminated using additive manufacturing (AM), generally known as three-dimensional (3D) printing. AM is a new and growing technique that has received attention in recent years. The inherent design freedom that it provides to the designer can result in sophisticated geometries that are impossible to produce by traditional technologies and all for the redesign and optimization of existing models. The work presented in this thesis aims to investigate the thermal performance of enhanced minichannel HXs manufactured via metal 3D printing both numerically and experimentally. Rectangular winglet vortex generators (VGs) have been chosen as the thermal enhancement method embedded inside the flat tube. COMSOL Multiphysics, a commercial software package using a finite element method (FEM), has been used as a numerical tool. The influence of the geometric VG parameters on the heat transfer and flow friction characteristics was studied by solving a 3D conjugate heat transfer and laminar flow. The ranges of studied parameters utilized in simulation section were obtained from our previous interaction with various AM technologies including direct metal laser sintering (DMLS) and electron-beam melting (EBM). For the simulation setup, distilled water was chosen as the working fluid with temperaturedependent thermal properties. The minichannel HX was assumed to be made of AlSi10Mg with a hydraulic diameter of 2.86 mm. The minichannel was heated by a constant heat flux of 5 Wcm−2 , and the Reynolds number was varied from 230 to 950. A sensitivity analysis showed that the angle of attack, VG height, VG length, and longitudinal pitch have notable effects on the heat transfer and flow friction characteristics. In contrast, the VG thickness and the distance from the sidewalls do not have a significant influence on the HX performance over the studied range. On the basis of the simulation results, four different prototypes including a smooth channel as a reference were manufactured with AlSi10Mg via DMLS technology owing to the better surface roughness and greater design uniformity. A test rig was developed to test the prototypes. Owing to the experimental facility and working fluid (distilled water), the experiment was categorized as either a simultaneously developing flow or a hydrodynamically developed but thermally developing flow. The Reynolds number ranged from 175 to 1370, and the HX was tested with two different heat fluxes of 1.5 kWm−2 and 3 kWm−2 . The experimental results for the smooth channel were compared to widely accepted correlations in the literature. It was found that 79% of the experimental data were within a range of ±10% of the values from existing correlations developed for the thermal entry length. However, a formula developed for the simultaneously developing flow overpredicted the Nusselt number. Furthermore, the results for the enhanced channels showed that embedding VGs can considerably boost the thermal performance up to three times within the parameters of the printed parts. Finally, the thermal performance of the 3D-printed channel showed that AM is a promising solution for the development of minichannel HXs. The generation of 3D vortices caused by the presence of VGs ii can notably boost the thermal performance, thereby reducing the HX size for a given heat duty.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Enhanced heat transfer"

1

Thome, John R. Enhanced boiling heat transfer. Hemisphere Pub. Corp., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. Introduction to Enhanced Heat Transfer. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-20740-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Glober, Stefan. Flow and heat transfer inside enhanced performance tubes. S. Glober], 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

1935-, Bergles A. E., Manglik R. M, Kraus Allan D, and Arthur E. Bergles Symposium (1996 : Georgia Institute of Technology), eds. Process, enhanced, and multiphase heat transfer: A festschrift for A.E. Bergles. Begell House, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

William, Brown. Orbit transfer rocket engine technology program: Enhanced heat transfer combustor technology : final report. NASA-Lewis Research Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

J, Rabas T., Webb Ralph L. 1934-, American Society of Mechanical Engineers. Heat Transfer Division., and National Heat Transfer Conference (29th : 1993 : Atlanta, Ga.), eds. Turbulent enhanced heat transfer: Presented at the 29th National Heat Transfer Conference, Atlanta, Georgia, August 8-11, 1993. American Society of Mechanical Engineers, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Narumanchi, S. Single-phase self-oscillating jets for enhanced heat transfer: Preprint. National Renewable Energy Laboratory, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zebrowski, David Stephen. Condensation heat-transfer measurements of refrigerants on externally enhanced tubes. Naval Postgraduate School, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

National Heat Transfer Conference (23rd 1985 Denver, Colo.). Advances in enhanced heat transfer--1985: Presented at the 23rd National Heat Transfer Conference, Denver, Colorado, August 4-7, 1985. American Society of Mechanical Engineers, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

K, Jensen M., Carey V. P, American Society of Mechanical Engineers. Heat Transfer in Energy Systems Committee (K-6), American Society of Mechanical Engineers. Technical Committee on Unfired Heat Transfer Equipment., and National Heat Transfer Conference (24th : 1987 : Pittsburgh, Pa.), eds. Advances in enhanced heat transfer, 1987: Presented at the 24th National Heat Transfer Conference and Exhibition, Pittsburgh, Pennsylvania, August 9-12, 1987. American Society of Mechanical Engineers, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Enhanced heat transfer"

1

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. "Heat Transfer Fundamentals for Design of Heat Transfer Enhancement Devices." In Introduction to Enhanced Heat Transfer. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20740-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Groll, Manfred, Stefan Rösler, Christophe Marvillet, John E. Hesselgreaves, Keith Cornwell, and Peter A. Kew. "Enhanced Evaporation Heat Transfer Surfaces." In Energy Efficiency in Process Technology. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1454-7_54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. "Active and Passive Techniques: Their Applications." In Introduction to Enhanced Heat Transfer. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20740-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. "Heat Exchanger Design Theory, Fin Efficiency, Variation of Fluid Properties." In Introduction to Enhanced Heat Transfer. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20740-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. "Fouling on Various Types of Enhanced Heat Transfer Surfaces." In Introduction to Enhanced Heat Transfer. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20740-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Saha, Sujoy Kumar, Hrishiraj Ranjan, Madhu Sruthi Emani, and Anand Kumar Bharti. "Conclusions." In Introduction to Enhanced Heat Transfer. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20740-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Thome, John R. "Flow Boiling of Refrigerant-Oil Mixtures in Plain and Enhanced Tubes." In Heat Transfer Enhancement of Heat Exchangers. Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-015-9159-1_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ding, Wenfeng, Guolong Zhao, Biao Zhao, et al. "Enhanced Heat Transfer Technology of Sustainable Cutting." In Hybrid-Energy Cutting of Aerospace Alloys. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5265-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ji, Jiadong, Baojun Shi, and Haishun Deng. "Research on Vibration-Enhanced Heat Transfer of IETB Heat Exchanger." In Vibration and Heat Transfer of Elastic Tube Bundles in Heat Exchangers. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-2875-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nakayama, W., K. Takahashi, and H. Kuwahara. "Enhanced Heat Transfer Tubes for the Evaporator of Refrigeration Machines." In Heat Transfer Enhancement And Energy Conservation. CRC Press, 2024. http://dx.doi.org/10.1201/9781003575726-48.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Enhanced heat transfer"

1

Chyu, M. K., B. V. K. Reddy, M. Barry, and J. Li. "Enhanced heat transfer characteristics and performance of composite thermoelectric devices." In HEAT TRANSFER 2012. WIT Press, 2012. http://dx.doi.org/10.2495/ht120021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Douglas, Z. W., M. K. Smith, and A. Glezer. "Acoustically enhanced boiling heat transfer." In 2007 13th International Workshop on Thermal Investigation of ICs and Systems (THERMINIC). IEEE, 2007. http://dx.doi.org/10.1109/therminic.2007.4451767.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cheng, H. B. "Carbon nanotubes suspended in ethylene glycol yield nanofluids with enhanced heat transfer properties." In HEAT TRANSFER 2014, edited by W. T. Ma, W. Hu, J. F. Wu, et al. WIT Press, 2014. http://dx.doi.org/10.2495/ht140071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pavlík, Z. "The thermal and mechanical performance of cement-based composites with enhanced thermal insulation properties." In HEAT TRANSFER 2014, edited by M. Záleská, M. Pavlíková, and R. Černý. WIT Press, 2014. http://dx.doi.org/10.2495/ht140231.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sukhatme, S. P. "CONDENSATION ON ENHANCED SURFACE HORIZONTAL TUBES." In International Heat Transfer Conference 9. Begellhouse, 1990. http://dx.doi.org/10.1615/ihtc9.1970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xiang, G. M., H. Y. Hu, X. F. Peng, and B. X. Wang. "Flow Boiling Inside Enhanced Heat Transfer Tubes." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0104.

Full text
Abstract:
Abstract A tube with longitudinal microchannels on inside wall was developed to enhance flow boiling heat transfer. The experimental investigation was conducted to identify the flow boiling heat transfer performance of liquid through the enhanced tubes. The flow boiling heat transfer in the enhanced tubes is greatly intensified, especially for the fully-developed nucleate boiling regime. The heat transfer coefficient in microchanneled tubes with smaller diameter is increased with a magnitude of 170% compared with the identical smooth tubes. The geometric configuration of microchannels and tubes would have significant effect of the flow boiling inside microchanneled tubes. The heat transfer performance of the microchanneled tubes is as good as or even better than that of other existing enhanced tubes.
APA, Harvard, Vancouver, ISO, and other styles
7

Shi, Weiwei, Joshua R. Vieitez, Austin S. Berrier, Matthew W. Roseveare, and Jonathan B. Boreyko. "ENHANCED WATER EVAPORATION WITH FLOATING SYNTHETIC LEAVES." In International Heat Transfer Conference 16. Begellhouse, 2018. http://dx.doi.org/10.1615/ihtc16.bae.023736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Webb, Ralph L. "ADVANCES IN MODELING ENHANCED HEAT TRANSFER SURFACES." In International Heat Transfer Conference 10. Begellhouse, 1994. http://dx.doi.org/10.1615/ihtc10.1980.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kukulka, David J., Wei Li, and Rick Smith. "Comparison of Heat Transfer Performance Between Smooth and Enhanced Heat Transfer Tubes." In ASME 2019 6th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/mnhmt2019-4044.

Full text
Abstract:
Abstract Heat transfer enhancement is an important factor in obtaining energy efficiency improvements in all heat transfer applications. A numeric study was performed that compares the performance of heat exchangers using the Vipertex enhanced heat transfer tubes (model 1EHT) to the performance of heat exchangers that use smooth surface tubes and other enhanced tubes. Surface enhancement of the 1EHT tube is accomplished through the use of the primary dimple enhancement and a secondary background pattern made up of petal arrays. Utilization of enhanced heat transfer tubes is an effective method that is utilized in the development of high performance thermal systems. Vipertex™ tubes, have been designed and produced through material surface modifications that produce flow optimized heat transfer tubes that increase heat transfer performance. Current energy demands and the desire to increase efficiencies of systems have prompted the development of optimized enhanced heat transfer surfaces. Enhanced heat transfer tubes are widely used in many areas (refrigeration, air-conditioning, process, petrochemical, chemical, etc.) in order to reduce cost, create a smaller application footprint or increase production. A new type of enhanced heat transfer tube has been created; therefore it is important to investigate relevant heat exchanger designs using the Vipertex enhanced surface tube in industrial applications and compare that performance to smooth tubes and other enhanced tubes. Results include design characteristics and performance predictions using the design simulations produced using HTRI Exchanger Suite (2016). Performance for all cases considered using the Vipertex tube predicted over design when compared to a smooth tube design. Vipertex 1EHT tubes produced enhanced heat transfer and cost efficient designs. In some of the case studies the 1EHT tubes produce an overdesign that is more than 35%, while smooth tubes produce an underdesign and other low fin tubes produce overdesign but not as large as the 1EHT tubes.
APA, Harvard, Vancouver, ISO, and other styles
10

Mertz, Rainer, Rudi Kulenovic, Yuming Chen, and Manfred Groll. "Pool Boiling of Butane from Enhanced Evaporator Tubes." In International Heat Transfer Conference 12. Begellhouse, 2002. http://dx.doi.org/10.1615/ihtc12.4560.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Enhanced heat transfer"

1

Shen, D. S., R. T. Mitchell, D. Dobranich, D. R. Adkins, and M. R. Tuck. Micro heat spreader enhanced heat transfer in MCMs. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10107765.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rodriguez, Salvador. Dimpled fractal fins for enhanced heat transfer. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1888357.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Trewin, R. R., M. K. Jensen, and A. E. Bergles. Enhanced boiling heat transfer in horizontal test bundles. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10176553.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Obot, N. T., E. B. Esen, and L. Das. Experimental studies of friction and heat transfer in enhanced passages. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5568530.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Duignan, M. R., G. A. Greene, and T. F. ,. Jr Irvine. Enhanced convective and film boiling heat transfer by surface gas injection. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/5050866.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Duignan, M. R., G. A. Greene, and T. F. ,. Jr Irvine. Enhanced convective and film boiling heat transfer by surface gas injection. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10158111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Obot, N. T., and E. B. Esen. Heat transfer and pressure drop for air flow through enhanced passages. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7069468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Obot, N. T., and E. B. Esen. Heat transfer and pressure drop for air flow through enhanced passages. Final report. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10155982.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eastman, Alan D. Low-Temperature Enhanced Geothermal System using Carbon Dioxide as the Heat-Transfer Fluid. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1164240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

White, T. L. Heat transfer enhanced microwave process for stabilization of liquid radioactive waste slurry. Final report. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/113758.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Enhanced heat transfer' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography