Books on the topic 'Enzyme structure/function'

All other things being equal, physiological reaction rate increases roughly exponentially with temperature. Organisms that have adapted over evolutionary time to live at different temperatures can have enzyme variants that exhibit similar kinetics at the temperatures to which they have adapted to operate. Within species whose distribution covers a range of temperatures, there may be differential expression of enzyme variants with different kinetics across the distribution. Enzymes adapted to different optimum temperatures differ in their amino acid sequence and thermal stability. The Gibbs energy of activation tends to be slightly lower in enzyme variants adapted to lower temperatures, but the big change is a decrease in the enthalpy of activation, with a corresponding change in the entropy of activation, both associated with a more open, flexible structure. Despite evolutionary adjustments to individual enzymes involved in intermediary metabolism (ATP regeneration), many whole-organism processes operate faster in tropical ectotherms compared with temperate or polar ectotherms. Examples include locomotion (muscle power output), ATP regeneration (mitochondrial function), nervous conduction and growth.

This chapter focuses on myocardial remodelling, a process that affects the heart’s shape, structure, and function, following myocardial injury (MI). Post-MI remodelling can be divided into three phases, with the first phase 0–72 hours beginning at the time of ischaemic injury, the second phase 72 hours to 6 weeks, and the third and last phase 6 weeks and beyond. During post-infarction remodelling, hypertrophy is an adaptive response that compensates for the increased load, reduces the effect of progressive dilatation, and balances contractile function. The chapter discusses the factors involved in ventricular remodelling and its association with heart failure progression. The effects of therapies designed to prevent or attenuate post-infarction left ventricular remodelling, with reference to the pathophysiological mechanisms involved, are then considered. Therapies specifically discussed include angiotensin-converting enzyme (ACE) inhibitors, angiotensin receptor blockers (ARBs), β‎-adrenoreceptor blockers, and aldosterone receptor antagonists.

Lipids are carried in plasma as microparticles, lipoproteins, composed of a core of hydrophobic lipids and a surface of amphipathic lipids. In addition, the particles carry proteins (i.e. apolipoproteins). The proteins have key functions in the metabolism as receptor ligands, enzymes or activators. Lipoproteins are classified based on density into: chylomicrons, VLDL, IDL, LDL, and HDL. Retention of apoB-containing lipoproteins (LDL, IDL, and VLDL) in the arterial intima is the initiating event in the development of atherosclerosis. Retention is mediated by binding of apoB to structural proteoglycans in the intima. Increased plasma concentration of apoB-containing lipoproteins is the main risk factor for atherosclerotic cardiovascular disease (CVD) and the causative role of LDL has been demonstrated in several studies. Lp(a) is a subclass of LDL and elevated Lp(a) is an independent risk-factor, primarily genetically mediated. Genetic data support that high Lp(a) causes atherosclerosis. Elevated triglycerides in plasma are associated with increased risk for CVD. Whether triglycerides directly induce atherogenesis is still unclear, but current data strongly support that remnant particles from triglyceride-rich lipoproteins are causal. HDL are lipoproteins that have been considered to be important for reversed cholesterol transport. Low HDL is a strong risk-factor for CVD. However, the causative role of HDL is debated and intervention studies to raise HDL have not been successful. Reduction of LDL is the main target for prevention and treatment, using drugs that inhibit the enzyme HMG-CoA reductase, i.e. statins. Other drugs for LDL reduction and to modify other lipoproteins may further reduce risk, and new therapeutic targets are explored.

The advent of recombinant human erythropoietin (epoetin) in the late 1980s transformed the management of renal anaemia, liberating many dialysis patients from lifelong regular blood transfusions, in turn causing severe iron overload and human leucocyte antigen sensitization. Epoetin can be administered either intravenously or subcutaneously, but the half-life of the drug is fairly short at around 6–8 hours, necessitating frequent injections. To circumvent this problem, two manipulations to the erythropoietin molecule were engineered. The first of these was to attach an extra two carbohydrate chains to the therapeutic protein hormone (to make darbepoetin alfa), and the second was to attach a large pegylation chain to make continuous erythropoietin receptor activator. Both of these strategies prolonged the circulating half-life of the erythropoietin analogue. The next erythropoietic agent to be produced was peginesatide, a peptide-based agent which had no structural homology with native or recombinant erythropoietin, but shared the same biological and functional characteristics. Future strategies include stabilization of hypoxia-inducible factor, by orally active inhibitors of the prolyl hydroxylase enzyme, and advanced clinical trials are underway. In the meantime, several large randomized controlled trials have highlighted the potential harm in targeting a near normal haemoglobin of 13–14 g/dL (with an increased risk of cardiovascular complications), and sub-normal correction of anaemia is now advised. Some patients may show mild or severe resistance to erythropoiesis-stimulating agent (ESA) therapy, and common causes include iron insufficiency, infection, and underlying inflammation. Very rarely, patients may produce antibodies against their ESA, which neutralize not only the ESA, but also endogenous erythropoietin, causing pure red cell aplasia.

Bones are multifunctional passive organs of movement that supports soft tissue and directly attached muscles. They also protect internal organs and are a reserve of calcium, phosphorus and magnesium. Each bone is covered with periosteum, and the adjacent bone surfaces are covered by articular cartilage. Histologically, the bone is an organ composed of many different tissues. The main component is bone tissue (cortical and spongy) composed of a set of bone cells and intercellular substance (mineral and organic), it also contains fat, hematopoietic (bone marrow) and cartilaginous tissue. Bones are a tissue that even in adult life retains the ability to change shape and structure depending on changes in their mechanical and hormonal environment, as well as self-renewal and repair capabilities. This process is called bone turnover. The basic processes of bone turnover are: • bone modeling (incessantly changes in bone shape during individual growth) following resorption and tissue formation at various locations (e.g. bone marrow formation) to increase mass and skeletal morphology. This process occurs in the bones of growing individuals and stops after reaching puberty • bone remodeling (processes involve in maintaining bone tissue by resorbing and replacing old bone tissue with new tissue in the same place, e.g. repairing micro fractures). It is a process involving the removal and internal remodeling of existing bone and is responsible for maintaining tissue mass and architecture of mature bones. Bone turnover is regulated by two types of transformation: • osteoclastogenesis, i.e. formation of cells responsible for bone resorption • osteoblastogenesis, i.e. formation of cells responsible for bone formation (bone matrix synthesis and mineralization) Bone maturity can be defined as the completion of basic structural development and mineralization leading to maximum mass and optimal mechanical strength. The highest rate of increase in pig bone mass is observed in the first twelve weeks after birth. This period of growth is considered crucial for optimizing the growth of the skeleton of pigs, because the degree of bone mineralization in later life stages (adulthood) depends largely on the amount of bone minerals accumulated in the early stages of their growth. The development of the technique allows to determine the condition of the skeletal system (or individual bones) in living animals by methods used in human medicine, or after their slaughter. For in vivo determination of bone properties, Abstract 10 double energy X-ray absorptiometry or computed tomography scanning techniques are used. Both methods allow the quantification of mineral content and bone mineral density. The most important property from a practical point of view is the bone’s bending strength, which is directly determined by the maximum bending force. The most important factors affecting bone strength are: • age (growth period), • gender and the associated hormonal balance, • genotype and modification of genes responsible for bone growth • chemical composition of the body (protein and fat content, and the proportion between these components), • physical activity and related bone load, • nutritional factors: – protein intake influencing synthesis of organic matrix of bone, – content of minerals in the feed (CA, P, Zn, Ca/P, Mg, Mn, Na, Cl, K, Cu ratio) influencing synthesis of the inorganic matrix of bone, – mineral/protein ratio in the diet (Ca/protein, P/protein, Zn/protein) – feed energy concentration, – energy source (content of saturated fatty acids - SFA, content of polyun saturated fatty acids - PUFA, in particular ALA, EPA, DPA, DHA), – feed additives, in particular: enzymes (e.g. phytase releasing of minerals bounded in phytin complexes), probiotics and prebiotics (e.g. inulin improving the function of the digestive tract by increasing absorption of nutrients), – vitamin content that regulate metabolism and biochemical changes occurring in bone tissue (e.g. vitamin D3, B6, C and K). This study was based on the results of research experiments from available literature, and studies on growing pigs carried out at the Kielanowski Institute of Animal Physiology and Nutrition, Polish Academy of Sciences. The tests were performed in total on 300 pigs of Duroc, Pietrain, Puławska breeds, line 990 and hybrids (Great White × Duroc, Great White × Landrace), PIC pigs, slaughtered at different body weight during the growth period from 15 to 130 kg. Bones for biomechanical tests were collected after slaughter from each pig. Their length, mass and volume were determined. Based on these measurements, the specific weight (density, g/cm3) was calculated. Then each bone was cut in the middle of the shaft and the outer and inner diameters were measured both horizontally and vertically. Based on these measurements, the following indicators were calculated: • cortical thickness, • cortical surface, • cortical index. Abstract 11 Bone strength was tested by a three-point bending test. The obtained data enabled the determination of: • bending force (the magnitude of the maximum force at which disintegration and disruption of bone structure occurs), • strength (the amount of maximum force needed to break/crack of bone), • stiffness (quotient of the force acting on the bone and the amount of displacement occurring under the influence of this force). Investigation of changes in physical and biomechanical features of bones during growth was performed on pigs of the synthetic 990 line growing from 15 to 130 kg body weight. The animals were slaughtered successively at a body weight of 15, 30, 40, 50, 70, 90, 110 and 130 kg. After slaughter, the following bones were separated from the right half-carcass: humerus, 3rd and 4th metatarsal bone, femur, tibia and fibula as well as 3rd and 4th metatarsal bone. The features of bones were determined using methods described in the methodology. Describing bone growth with the Gompertz equation, it was found that the earliest slowdown of bone growth curve was observed for metacarpal and metatarsal bones. This means that these bones matured the most quickly. The established data also indicate that the rib is the slowest maturing bone. The femur, humerus, tibia and fibula were between the values of these features for the metatarsal, metacarpal and rib bones. The rate of increase in bone mass and length differed significantly between the examined bones, but in all cases it was lower (coefficient b <1) than the growth rate of the whole body of the animal. The fastest growth rate was estimated for the rib mass (coefficient b = 0.93). Among the long bones, the humerus (coefficient b = 0.81) was characterized by the fastest rate of weight gain, however femur the smallest (coefficient b = 0.71). The lowest rate of bone mass increase was observed in the foot bones, with the metacarpal bones having a slightly higher value of coefficient b than the metatarsal bones (0.67 vs 0.62). The third bone had a lower growth rate than the fourth bone, regardless of whether they were metatarsal or metacarpal. The value of the bending force increased as the animals grew. Regardless of the growth point tested, the highest values were observed for the humerus, tibia and femur, smaller for the metatarsal and metacarpal bone, and the lowest for the fibula and rib. The rate of change in the value of this indicator increased at a similar rate as the body weight changes of the animals in the case of the fibula and the fourth metacarpal bone (b value = 0.98), and more slowly in the case of the metatarsal bone, the third metacarpal bone, and the tibia bone (values of the b ratio 0.81–0.85), and the slowest femur, humerus and rib (value of b = 0.60–0.66). Bone stiffness increased as animals grew. Regardless of the growth point tested, the highest values were observed for the humerus, tibia and femur, smaller for the metatarsal and metacarpal bone, and the lowest for the fibula and rib. Abstract 12 The rate of change in the value of this indicator changed at a faster rate than the increase in weight of pigs in the case of metacarpal and metatarsal bones (coefficient b = 1.01–1.22), slightly slower in the case of fibula (coefficient b = 0.92), definitely slower in the case of the tibia (b = 0.73), ribs (b = 0.66), femur (b = 0.59) and humerus (b = 0.50). Bone strength increased as animals grew. Regardless of the growth point tested, bone strength was as follows femur > tibia > humerus > 4 metacarpal> 3 metacarpal> 3 metatarsal > 4 metatarsal > rib> fibula. The rate of increase in strength of all examined bones was greater than the rate of weight gain of pigs (value of the coefficient b = 2.04–3.26). As the animals grew, the bone density increased. However, the growth rate of this indicator for the majority of bones was slower than the rate of weight gain (the value of the coefficient b ranged from 0.37 – humerus to 0.84 – fibula). The exception was the rib, whose density increased at a similar pace increasing the body weight of animals (value of the coefficient b = 0.97). The study on the influence of the breed and the feeding intensity on bone characteristics (physical and biomechanical) was performed on pigs of the breeds Duroc, Pietrain, and synthetic 990 during a growth period of 15 to 70 kg body weight. Animals were fed ad libitum or dosed system. After slaughter at a body weight of 70 kg, three bones were taken from the right half-carcass: femur, three metatarsal, and three metacarpal and subjected to the determinations described in the methodology. The weight of bones of animals fed aa libitum was significantly lower than in pigs fed restrictively All bones of Duroc breed were significantly heavier and longer than Pietrain and 990 pig bones. The average values of bending force for the examined bones took the following order: III metatarsal bone (63.5 kg) <III metacarpal bone (77.9 kg) <femur (271.5 kg). The feeding system and breed of pigs had no significant effect on the value of this indicator. The average values of the bones strength took the following order: III metatarsal bone (92.6 kg) <III metacarpal (107.2 kg) <femur (353.1 kg). Feeding intensity and breed of animals had no significant effect on the value of this feature of the bones tested. The average bone density took the following order: femur (1.23 g/cm3) <III metatarsal bone (1.26 g/cm3) <III metacarpal bone (1.34 g / cm3). The density of bones of animals fed aa libitum was higher (P<0.01) than in animals fed with a dosing system. The density of examined bones within the breeds took the following order: Pietrain race> line 990> Duroc race. The differences between the “extreme” breeds were: 7.2% (III metatarsal bone), 8.3% (III metacarpal bone), 8.4% (femur). Abstract 13 The average bone stiffness took the following order: III metatarsal bone (35.1 kg/mm) <III metacarpus (41.5 kg/mm) <femur (60.5 kg/mm). This indicator did not differ between the groups of pigs fed at different intensity, except for the metacarpal bone, which was more stiffer in pigs fed aa libitum (P<0.05). The femur of animals fed ad libitum showed a tendency (P<0.09) to be more stiffer and a force of 4.5 kg required for its displacement by 1 mm. Breed differences in stiffness were found for the femur (P <0.05) and III metacarpal bone (P <0.05). For femur, the highest value of this indicator was found in Pietrain pigs (64.5 kg/mm), lower in pigs of 990 line (61.6 kg/mm) and the lowest in Duroc pigs (55.3 kg/mm). In turn, the 3rd metacarpal bone of Duroc and Pietrain pigs had similar stiffness (39.0 and 40.0 kg/mm respectively) and was smaller than that of line 990 pigs (45.4 kg/mm). The thickness of the cortical bone layer took the following order: III metatarsal bone (2.25 mm) <III metacarpal bone (2.41 mm) <femur (5.12 mm). The feeding system did not affect this indicator. Breed differences (P <0.05) for this trait were found only for the femur bone: Duroc (5.42 mm)> line 990 (5.13 mm)> Pietrain (4.81 mm). The cross sectional area of the examined bones was arranged in the following order: III metatarsal bone (84 mm2) <III metacarpal bone (90 mm2) <femur (286 mm2). The feeding system had no effect on the value of this bone trait, with the exception of the femur, which in animals fed the dosing system was 4.7% higher (P<0.05) than in pigs fed ad libitum. Breed differences (P<0.01) in the coross sectional area were found only in femur and III metatarsal bone. The value of this indicator was the highest in Duroc pigs, lower in 990 animals and the lowest in Pietrain pigs. The cortical index of individual bones was in the following order: III metatarsal bone (31.86) <III metacarpal bone (33.86) <femur (44.75). However, its value did not significantly depend on the intensity of feeding or the breed of pigs.