Relevant bibliographies by topics / Epoxide composites

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Epoxide composites'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Epoxide composites.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Epoxide composites"

1

Lu, Yan Yan, Hua Li, and He Zhou Liu. "Electron Beam Curing of Epoxide Modified MWNTs/Epoxy Composites." Materials Science Forum 688 (June 2011): 69–73. http://dx.doi.org/10.4028/www.scientific.net/msf.688.69.

Full text
Abstract:
Electron beam (EB) has been used in curing of polymers in view of its advantages over conventional curing processes including short curing time, lower thermal stress, reduction of hazardous chemical volatiles, higher production flexibility. Carbon nanotubes have been recognized as promising filler that can be used to change the mechanical, thermal and electrical properties of the polymer matrix composites. In this paper, EB curing of epoxide modified multi-walled carbon nanotubes (MWNTs)/epoxy composite has been investigated, and a bisphenol-A epoxy resin was used as matrix. MWNTs were chemica
APA, Harvard, Vancouver, ISO, and other styles
2

Sabino-Netto, Aurélio C., Gean V. Salmoria, Carlos H. Ahrens, and António Sergio Pouzada. "Friction Properties of Steel Fibre Reinforced Epoxy Composites Used in Moulding Blocks of Hybrid Moulds." Materials Science Forum 587-588 (June 2008): 217–21. http://dx.doi.org/10.4028/www.scientific.net/msf.587-588.217.

Full text
Abstract:
Rapid tools for injection moulding are often produced by casting of epoxide filled composites. The moulding blocks obtained in this way are likely to undergo wear especially at the surfaces of the moulding cores during the ejection phase. In this study, tribological properties of epoxide composites containing different volume fractions of short steel fibres used in moulding blocks were assessed. Friction tests with the composites and moulded polypropylene were carried out with a prototype equipment that reproduces the actual ejection phase of injection moulding. The friction data were interpre
APA, Harvard, Vancouver, ISO, and other styles
3

Gallyamov, A. R., I. D. Ibatullin, and A. Y. Murzin. "Improvement of Electrical Insulating and Anti-Wear Properties of Composites Used in Telemetry Systems." Applied Mechanics and Materials 792 (September 2015): 578–81. http://dx.doi.org/10.4028/www.scientific.net/amm.792.578.

Full text
Abstract:
This article deals with the research results of electroinsulated and tribotechnical properties of composite materials on the basis of epoxide resin. The effect of fillers — micro-and nanopowders of various materials - on the properties of composites is examined. The use of composites in the manufacture of separators for telemetry systems is demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
4

Quadflieg, Till, Sebastian Leimbrink, Thomas Gries, and Oleg Stolyarov. "Effect of coating type on the mechanical performance of warp-knitted fabrics and cement-based composites." Journal of Composite Materials 52, no. 19 (2018): 2563–76. http://dx.doi.org/10.1177/0021998317750003.

Full text
Abstract:
High-performance textiles are used for reinforcing concrete structural parts. This paper presents a technique for producing coated weft-inserted warp-knitted fabrics for concrete applications. Three types of reinforced fabrics differing in coating type and composed of alkali-resistant-glass rovings resulting in a cement composite matrix were produced. The investigated coatings include potassium silicate, carboxylated styrene butadiene rubber and epoxide. The mechanical properties of the developed fabrics and cement composites were determined according to the coating type. Thereafter, the mecha
APA, Harvard, Vancouver, ISO, and other styles
5

Mostovoy, Anton, Amirbek Bekeshev, Andrey Shcherbakov, Arai Zhumabekova, Zhadira Nurtai, and Marina Lopukhova. "Preparation and Characteristics of Fire-Safe Foamed Epoxy Composites Filled with Technogenic Waste from Ceramic Brick Production." Journal of Composites Science 9, no. 1 (2025): 15. https://doi.org/10.3390/jcs9010015.

Full text
Abstract:
As a result of the conducted studies, the method of combining components and foaming parameters for obtaining foam epoxides has been selected. The relationship between the structure of the foam epoxide and the amount of the added blowing agent—ammonium carbonate—has been established. This study explores the development of fire-safe foamed epoxy composites by incorporating technogenic waste from ceramic brick production. The optimized composites demonstrated improved compressive strength, enhanced fire resistance (the LOI—35–44%—and successful UL-94 V-0 testing) through the use of flame retarda
APA, Harvard, Vancouver, ISO, and other styles
6

Lu, Yan Yan, Hua Li, and He Zhou Liu. "Study on Electron Beam Curing of APTES Functionalized MWNTs/ Epoxy Composites." Advanced Materials Research 194-196 (February 2011): 1607–10. http://dx.doi.org/10.4028/www.scientific.net/amr.194-196.1607.

Full text
Abstract:
In this study, we prepared the 3-aminopropyltriethoxysilane (APTES) functionalized MWNTs/epoxy composites by electron beam (EB) irradiation process. The modified MWNTs were characterized with SEM-EDS and FTIR. The gel content and conversion rate of epoxide groups of the EB cured pure epoxy resin and the APTES functionalized MWNTs/epoxy composites were measured and discussed. And the mechanical properties of the EB cured composites were also characterized. With addition of 0.25wt% APTES functionalized MWNTs, the Vicker’s hardness of the EB cured composite increased 100.02% compared with pure ep
APA, Harvard, Vancouver, ISO, and other styles
7

Bok, Goseong, Gayoung Lim, Mingi Kwak, and Youngmin Kim. "Super-Toughened Fumed-Silica-Reinforced Thiol-Epoxy Composites Containing Epoxide-Terminated Polydimethylsiloxanes." International Journal of Molecular Sciences 22, no. 15 (2021): 8097. http://dx.doi.org/10.3390/ijms22158097.

Full text
Abstract:
In response to the demand for high-performance materials, epoxy thermosetting and its composites are widely used in various industries. However, their poor toughness, resulting from the high crosslinking density of the epoxy network, must be improved to expand their application to the manufacturing of flexible products. In this study, ductile epoxy thermosetting was produced using thiol compounds with functionalities of 2 and 3 as curing agents. The mechanical properties of the epoxy were further enhanced by incorporating fumed silica into it. To increase the filler dispersion, epoxide-termina
APA, Harvard, Vancouver, ISO, and other styles
8

Sabino-Netto, Aurélio C., Gean V. Salmoria, Carlos H. Ahrens, and António Sergio Pouzada. "Mechanical Properties of Epoxy Composites Filled with Short Steel Fibres for Hybrid Injection Moulds." Materials Science Forum 587-588 (June 2008): 222–26. http://dx.doi.org/10.4028/www.scientific.net/msf.587-588.222.

Full text
Abstract:
Epoxide filled composites are being increasingly used for mouldings blocks of hybrid injection moulds. The filling is sought for improving both mechanical and thermal properties that are relevant for the mould performance. In spite of several works investigating the particulate filling of resins, there are only a few reports on fibre reinforcement. Composites based on an epoxy system with varying volume fractions of short steel fibres (SSF) were investigated. The mechanical properties were determined for each composite, and the topography of the fracture surfaces was analyzed by SEM. The mecha
APA, Harvard, Vancouver, ISO, and other styles
9

Roy, Kumarjyoti, Subhas Chandra Debnath, Aphiwat Pongwisuthiruchte, and Pranut Potiyaraj. "NATURAL RUBBER/MICROCRYSTALLINE CELLULOSE COMPOSITES WITH EPOXIDIZED NATURAL RUBBER AS COMPATIBILIZER." Rubber Chemistry and Technology 92, no. 2 (2019): 378–87. http://dx.doi.org/10.5254/rct.19.81533.

Full text
Abstract:
ABSTRACT An exploration of the effect of epoxidized NR with 50 mole% epoxide groups (ENR-50) as compatibilizer on the rubber–filler interaction of microcrystalline cellulose (MCC)-filled NR composites was conducted. The compatibilizing efficiency of ENR-50 was systematically examined in terms of cure and mechanical and thermal properties of NR/MCC composites. ENR-50 compatibilized NR/MCC composites showed moderate enhancement in the maximum rheometric torque and tensile properties compared to either uncompatibilized NR/MCC composite or unfilled NR system. The solvent uptake measurements indica
APA, Harvard, Vancouver, ISO, and other styles
10

YAMAZAKI, Toshiharu, and Kazuo CHIBA. "Fatigue strength of alumina particulate filled epoxide composites." Journal of the Society of Materials Science, Japan 35, no. 393 (1986): 629–35. http://dx.doi.org/10.2472/jsms.35.629.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Epoxide composites"

1

CORBEL, CHRISTINE. "Generation thermoelastique d'ondes acoustiques dans les materiaux composites carbone-epoxide. Mise en evidence du phenomene d'autofocalisation." Paris 7, 1993. http://www.theses.fr/1993PA077238.

Full text
Abstract:
Nous presentons dans cette these une etude de la generation d'ondes elastiques par impact laser dans les materiaux composites de type carbone epoxyde. Deux sortes de drapage ont ete examinees: l'unidirectionnel et le croise 0/45/90/45. Dans le premier chapitre nous decrivons leur mode de fabrication ainsi que leurs proprietes caracteristiques intervenant dans le mecanisme de la generation thermoelastique. Dans le second chapitre nous rappelons le principe de la generation photoacoustique. Nous nous attachons en particulier a determiner la distribution de temperature dans le materiau et l'aniso
APA, Harvard, Vancouver, ISO, and other styles
2

Долгов, Н. А., Н. Н. Букетова та А. А. Сапронов. "Исследование остаточных напряжений в эпоксидных композитах, наполненных нанодисперсным алмазом". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/47312.

Full text
Abstract:
Наиболее высокие характеристики прочности среди полимерных матриц имеют эпоксидные смолы. Для повышения эксплуатационных свойств эпоксидной матрицы в нее вводят различные модификаторы. Одними из наиболее перспективных наполнителей являются нанодисперсные алмазы.
APA, Harvard, Vancouver, ISO, and other styles
3

Milanese, Andressa Cecília [UNESP]. "Processamento e caracterização de compósito fibra de sisal/resina epóxi via RTM." Universidade Estadual Paulista (UNESP), 2012. http://hdl.handle.net/11449/115652.

Full text
Abstract:
Made available in DSpace on 2015-03-03T11:52:25Z (GMT). No. of bitstreams: 0 Previous issue date: 2012-11-26Bitstream added on 2015-03-03T12:07:17Z : No. of bitstreams: 1 000706554.pdf: 2183734 bytes, checksum: 9c69fb93433a041adafed9efedc0ee91 (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>O desenvolvimento de compósitos formados por matrizes poliméricas e reforçados com fibras naturais ganhou notável interesse na pesquisa, a partir da década de 90. A elevada demanda por compósitos, aliada à regulamentação das leis ambientais, tornou indispensável o aperfeiço
APA, Harvard, Vancouver, ISO, and other styles
4

Beldjoudi, Nadir. "Interaction ondes electromagnetiques-polymeres : comportement des resines epoxydes sous rayonnement micro-onde continu ou pulse, application aux composites epoxyde/poudre d'argent." Toulouse 3, 1988. http://www.theses.fr/1988TOU30006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Faria, Maria Cândida Magalhães de [UNESP]. "Estudo das intempéries nas propriedades mecânicas e viscoelásticas de compósitos PPS/Fibras de carbono e EPOXI/Fibras de carbono de uso aeronaútico." Universidade Estadual Paulista (UNESP), 2012. http://hdl.handle.net/11449/103726.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:32:50Z (GMT). No. of bitstreams: 0 Previous issue date: 2012-10-03Bitstream added on 2014-06-13T21:04:59Z : No. of bitstreams: 1 faria_mcm_dr_guara.pdf: 2691005 bytes, checksum: a507bf57757d62ae4ad112e4aeb41c2e (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>Durante o século XX os materiais compósitos estruturais receberam especial atenção dos pesquisadores, o que levou a uma rápida evolução tecnológica acarretando uma intensa procura e posterior obtenção de materiais com características mecânicas cada vez mais elevada
APA, Harvard, Vancouver, ISO, and other styles
6

Jensen, Robert Eric. "Investigation of Waterborne Epoxies for E-Glass Composites." Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/28225.

Full text
Abstract:
Research is presented which encompasses a study of epoxies based on diglycidyl ether of bisphenol A (DGEBA) cured with 2-ethyl-4-methylimidazole (EMI-24) in the presence of the nonionic surfactant Triton X-100. Interest in this epoxy system is due partially to the potential application as a waterborne replacement for solvent cast epoxies in E-glass laminated printed circuit boards. This research has revealed that the viscoelastic behavior of the cured epoxy is altered when serving as the matrix in a glass composite. The additional constraining and coupling of the E-glass fibers to the segme
APA, Harvard, Vancouver, ISO, and other styles
7

Durin, Christian. "Contribution à l'étude du vieillissement de matériaux composites carbone/epoxyde sous ambiance spatiale." Toulouse, ENSAE, 1988. http://www.theses.fr/1988ESAE0008.

Full text
Abstract:
Dégradation des matrices, caractérisation des matériaux apres irradiation et cycles thermiques. Essais mécaniques pour étudier l'influence des dégradations sur les températures de transition des matériaux et sur leurs caractéristiques mécaniques dynamiques. Variation de la stabilité dimensionnelle des matériaux fissures.
APA, Harvard, Vancouver, ISO, and other styles
8

LIU, ZENG-GANG. "Comportement et modelisation des materiaux composites carbone/epoxyde en cisaillement a grande vitesse." Nantes, 1987. http://www.theses.fr/1987NANT2011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, Jung Ju. "The fracture behaviour of bead-filled epoxies and hybrid composites." Thesis, University of Surrey, 1992. http://epubs.surrey.ac.uk/844186/.

Full text
Abstract:
The plane strain fracture toughness of seven different particle-filled epoxies has been measured using compact tension specimens. These toughened epoxies were based on 828 epoxy resin filled with three types of phenolic beads and four types of carbon beads. Significant increases in toughness were observed (up to about 50% with 30% volume fraction of bead) and the mechanisms of toughening have been studied using scanning electron microscopy. The suggested major toughening mechanisms are crack pinning, localized plastic deformation associated with particle-matrix debonding and transparticle frac
APA, Harvard, Vancouver, ISO, and other styles
10

Ek, Fliesberg Linda, and Beatrice Linné. "Framställning av magnetisk polymerkomposit : Stålpulverfylld epoxi med magnetiska egenskaper." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-448092.

Full text
Abstract:
To compete with other manufacturing companies in the market, product design and manufacturing methods need to be improved constantly. To save time and money, there is an advantage if there is a manufacturing plan in place before designing the final product. Composites have been used worldwide for over 6,000 years and their use is expected to increase in the future. Composites offer advantages in product design and manufacturing since it can be adapted to the intended purpose.  The purpose of the project is to determine whether it is possible to produce a magnetic polymer composite with a suffi
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Epoxide composites"

1

Jin, Henghua, Kevin R. Hart, Anthony M. Coppola, et al. "Self-Healing Epoxies and Their Composites." In Self-Healing Polymers. Wiley-VCH Verlag GmbH & Co. KGaA, 2013. http://dx.doi.org/10.1002/9783527670185.ch15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Xiawa, and Jaafar A. El-Awady. "Multiscale Modeling of Epoxies and Epoxy-Based Composites." In Integrated Computational Materials Engineering (ICME). Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-40562-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Morgan, R. J. "Structure-property relations of epoxies used as composite matrices." In Advances in Polymer Science. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-15546-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pluvinage, G., C. Schmitt, and M. Abisroft. "Etude de la Fissuration D’Un Materiau Composite Verre-Epoxyde Unidirectionnel Sollicite en Traction." In Developments in the Science and Technology of Composite Materials. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1123-9_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dovgualo, Vladimir, Elena Pisanova, Larisa Zaborskaya, Rimma Krotova, Valentin Lapitski, and Oleg Yurkevich. "Hybrid Matrices Based on Polysulfone and Epoxies Used in Structural Composites." In MICC 90. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3676-1_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rohen, Lázaro A., Frederieo M. Margem, Anna C. C. Neves, et al. "Izod Impact Test in Epoxi Matrix Composites Reinforced with Hemp Fiber." In Characterization of Minerals, Metals, and Materials 2015. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093404.ch69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rohen, Lázaro A., Frederico M. Margem, Anna C. C. Neves, et al. "Izod Impact Test in Epoxi Matrix Composites Reinforced with Hemp Fiber." In Characterization of Minerals, Metals, and Materials 2015. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48191-3_69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chervin, Christopher N., Hsiang Wei Chiu, Susan M. Kauzlarich, Brady J. Clapsaddle, Robert S. Glass, and Joe H. Satcher. "Y2O3-Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Solgel Synthesis for Use in SOFC Composite Cathodes." In Ceramic Engineering and Science Proceedings. John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470291245.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"MECHANICAL PROPERTIES OF EPOXY/QUARTZ COMPOSITES." In Crosslinked Epoxies. De Gruyter, 1987. http://dx.doi.org/10.1515/9783110867381-053.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"EPOXY/ARAMID-FIBRE-BASED HIGH-GRADE COMPOSITES." In Crosslinked Epoxies. De Gruyter, 1987. http://dx.doi.org/10.1515/9783110867381-044.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Epoxide composites"

1

Vokshi, Eri, Venkat Minnikanti, and Davie Peguero. "Performance of Epoxies Used in Non-Metallic Composite Repair Systems in Aggressive Environments." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05827.

Full text
Abstract:
Abstract Samples of three types of epoxies exposed to aggressive environments in the repair of leaking pipelines were subjected to 1000hr chemical immersion tests. The chemicals used for testing are hydrochloric acid (HCl), sodium hydroxide (NaOH), sulfuric acid (H2SO4), acetic acid (AcOH), MEK, and Ethylene Dichloride (EDC). Changes to the chemical structure and material properties of the epoxies were analyzed via Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), shore D hardness, and change in weight. Correlations between different types of tests performed on the ep
APA, Harvard, Vancouver, ISO, and other styles
2

Stesikova, Elvira, Tammy L. Metroke, Perry L. Reed, Vinod S. Agarwala, and Edward T. Knobbe. "Impact of Trivalent Chromium Conversion Layers and Hybrid Silicate Coatings on Corrosion Resistance of Aluminum Alloys." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00287.

Full text
Abstract:
Abstract Trivalent chromium conversion coatings have been deposited onto aluminum 2024-T3 alloy by immersion into or by spraying on a solution of chromic sulfate and hexafluorozirconate for periods of time varying from 3 minutes to 5 days. This treatment was followed by the deposition of hybrid silicate materials containing different organic modifiers [vinyl, methacrylate, epoxide functionalities and poly(2-ethyl-2-oxazoline)] to produce composite coatings. Aluminum alloys coated with the composite films, as well as single-layer coated aluminum alloys, i.e. coated with the conversion coating o
APA, Harvard, Vancouver, ISO, and other styles
3

Sugerman, Gerald, and Salvatore J. Monte. "Alkoxy Titanates and Zirconates as Corrosion Inhibitors in Clear Coats and Unfilled Polymers." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88341.

Full text
Abstract:
Abstract Usage of organometallic (zirconium/titanium based) anticorrosive vehicle soluble additives will be shown to combat corrosion in clear and translucent coatings and thick film polymer matrices. Said performance upgrade is a composite effect engendered by a combination of effects including base resin(s), repolymerization, substrate adhesion promotion/passivation and/or product permeability minimization. Applications in epoxies, acrylics, polyurethanes and PVC will be detailed.
APA, Harvard, Vancouver, ISO, and other styles
4

Bibber, John W. "A Chrome-Free Conversion Coating for Aluminum with the Corrosion Resistance of Chrome." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95392.

Full text
Abstract:
Abstract The cleaning, deoxidization, and conversion coating of automotive aluminum alloys with a commercial non-toxic and chrome-free pretreatment sytem is described in detail. The results of paint adhesion and filiform testing with powder coatings, solvent and water borne epoxies and various urethane coatings is presented along with comparison data for chrome and other non-chrome systems. Neutral salt-spray data is presented. In addition, scanning electron micrographs of treated surfaces are shown along with data on the physical and chemical compositon of the surfaces.
APA, Harvard, Vancouver, ISO, and other styles
5

Krissa, Len J., Christophe Baeté, and Jerry DeWitt. "CP Management of Multiple Pipeline Right-of-Ways." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05795.

Full text
Abstract:
Abstract The report discusses cathodic protection (CP) experiences on the world’s longest, most complex crude oil and liquid hydrocarbon transportation system; having 24,738 kilometers (15,372 miles) of pipeline throughout North America. Since initial construction of the first pipeline in 1949, infrastructure has continually been enhanced and improved to meet the needs of the Company’s shippers. The expansion has resulted in areas of the mainline corridor where up to seven (7) parallel pipelines are contained within the same right-of-way (ROW). The evolution of construction materials over the
APA, Harvard, Vancouver, ISO, and other styles
6

Everitt, Daniel, Richard Trask, Duncan Wass, and Ian Bond. "Embedded Catalytic Healing Agents for the Repair of Fibre-Reinforced Composites." In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/smasis2014-7504.

Full text
Abstract:
The inclusion of latent catalytic healing agents (CHAs) during layup of fibre-reinforced polymer (FRP) composite specimens yields a functionalised composite material with the capability to self-repair. Strategies for preventing the reaction of CHAs with prepreg resins during curing of the host material are explored. The inclusion of catalyst as an interleave on the composite mid-plane was found to be detrimental to the fracture toughness of the double cantilever beam (DCB) specimens. A potential application for this effect includes damage redirection, whereby propagating damage is steered into
APA, Harvard, Vancouver, ISO, and other styles
7

Bian, Dakai, Jason C. Tsui, Robert R. Kydd, D. J. Shim, Marshall Jones, and Y. Lawrence Yao. "Interlaminar Toughening of Fiber Reinforced Polymers by Synergistic Modification of Resin and Fiber." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6528.

Full text
Abstract:
The synergistic effect of combining different modification methods was investigated in this study to improve the interlaminar toughness and delamination resistance of fiber reinforced polymers (FRP). Epoxy-compatible polysulfone (PSU) was end-capped with epoxide group through functionalization, and the fiber surface was chemically grafted with amino functional group to form a micron-size rough surface. Consequently, the long chain of PSU entangles into crosslinked thermoset epoxy network, additionally, epoxide group on PSU further improves the bonding through chemical connection to the epoxy n
APA, Harvard, Vancouver, ISO, and other styles
8

Chian, K. S., and S. Yi. "Development and Characterisation of a Oxazolidone-Isocyanurate-Urethane Modified Diglycidyl Ether of Bisphenol A Epoxy Resin." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-1204.

Full text
Abstract:
Abstract Epoxy resins are very versatile polymers generally known not only for their adhesive and mechanical strengths but also their inherent thermo-oxidative stability. These properties have been widely exploited in many applications ranging from composites used aerospace components to electronics packaging. However neat epoxy materials suffer from relatively poor strain bearing ability and attempts to improve this brittle behaviour have been an area of many research interests. Toughening of epoxy using elastomers is not new and this is reflected in numerous publications and some have been s
APA, Harvard, Vancouver, ISO, and other styles
9

VASHISTH, ANIRUDDH, TODD HENRY, and CHARLES BAKIS. "Quantitative Microscopic Investigation of Mode I Fracture Surfaces of Nanosilica-Filled Epoxies." In American Society for Composites 2018. DEStech Publications, Inc., 2018. http://dx.doi.org/10.12783/asc33/26014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Brown, Alexander L. "Discriminating Composite Panels by Use of a Spectral Reflectometer." In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17614.

Full text
Abstract:
Carbon fibers are being increasingly used in composites for aircraft. They are bound together with a binder, often an epoxy. There are many grades of binders, and many different types of composites sold on the market. They are expensive. We have some donated materials of unknown type, and would like to be able to be cost-effective and use them without incurring a large cost to analyze the materials using laboratory methods. Visual inspection is not normally sufficiently accurate to be able to tell one composite from another. Optical methods that involve a broader spectrum have commonly been us
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Epoxide composites' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography