Journal articles: 'Equipment and accessories'

1

&NA;. "The MOBILIZES Equipment Carrier Accessories." Orthopaedic Nursing 5, no. 1 (January 1986): 46. http://dx.doi.org/10.1097/00006416-198601000-00011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wander, P., and P. Gordon. "Setting up: equipment, lighting and accessories." British Dental Journal 162, no. 7 (April 1987): 268–80. http://dx.doi.org/10.1038/sj.bdj.4806104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Liu, Yong Rui. "Recognition of Mechanical and Electrical Accessories in Monitoring Equipment in Nursing Work." Applied Mechanics and Materials 416-417 (September 2013): 2045–49. http://dx.doi.org/10.4028/www.scientific.net/amm.416-417.2045.

Full text

Abstract:

The monitor accessories are of vital importance to determine whether monitors could accurately display real-time data, which has a direct impact on the correct diagnosis of clinical personnel. The author has engaged in nursing work for more than a decade, and is now Director of Nursing Department, fully aware of the importance of care for patients at all times in nursing. A great many medical problems now in particular make me feel a great sense of responsibility. Mindray care accounts for more than 80% of the total care in this hospital. With the example of Mindray care accessories, it gives an introduction of the way to recognize accessories to assist clinical in judging whether monitor accessories are genuine; in case of the current use speed of administrative office in using accessories, it generally needs to reserve a certain amount of dynamic volume. Reserve standard of nursing work in our hospital is basically to utilize consumption material numbering date combined with recipient date to determine accessories warranty period and give full play to the equipment, so as to make our clinical nursing work better.

APA, Harvard, Vancouver, ISO, and other styles

4

Santos, Zipora Morgana Quinteiro dos, Gabriela de Campos Severo, Maiara Krebs Segatto, and Jéssica dos Reis Lohmann Monteiro. "GUIDELINES FOR THE CLEANING OF EQUIPMENT AND ACCESSORIES USED IN THE BEAUTY INDUSTRY." International Journal for Innovation Education and Research 9, no. 5 (May 1, 2021): 576–86. http://dx.doi.org/10.31686/ijier.vol9.iss5.3127.

Full text

Abstract:

In the current scenario caused by Coronavirus Disease 2019 (COVID-19) pandemic, biosafety practices in the cleaning of surfaces, equipment and accessories used in aesthetic care are essential to ensure the health of professionals and clients who attend the health, beauty, and wellness segments. In view of the importance of preserving and preparing the work environment for safe attendance, issues related to procedures, materials and processes for cleaning, disinfecting and sterilizing equipment and accessories used in aesthetic environments according to the degree of criticality have been elucidated.

APA, Harvard, Vancouver, ISO, and other styles

5

Jiang, Wei, Yan Ling Han, Wei Dong, and Qiang Zhou. "Analysis for the Large Precise Equipment Assembly." Applied Mechanics and Materials 670-671 (October 2014): 915–19. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.915.

Full text

Abstract:

In industrial and construction process, some precise equipments should be assembled on site. The assembly requirement is very high, and it is hard to assemble the accessories together. The paper is based on a real situation in construction to study the precise equipment assembly method. First, it introduces the situation on site and the parameter of the parts of equipment need to be assembled. Then show the cost for the traditional assembly method. Put forward a new method to do the work. At last, compare the advantage and disadvantage of the two methods. The new method mentioned in the paper will greatly improve the installation efficiency in the construction.

APA, Harvard, Vancouver, ISO, and other styles

6

Skurotyany, Yurii, M. O. Stuchinsky, and Yuliya Ponomareva. "Voluntary certification of wheeled vehicle parts and equipment." Avtoshliakhovyk Ukrayiny, no. 2(254)’2018 (June 20, 2018): 22–27. http://dx.doi.org/10.33868/0365-8392-2018-2-254-22-27.

Full text

Abstract:

The article describes the procedure of voluntary certification of spare parts and accessories for wheeled vehicles in certification system of State Enterprise “State Road Transport Research Institute”. Keywords: application, the applicant, voluntary certification, certificate of conformity, quality management certificate, voluntary certification mark, marking, testing

APA, Harvard, Vancouver, ISO, and other styles

7

Sapon, Serhii, and Oleksandr Kosmach. "FUNCTIONAL ASSIGNMENT OF TECHNOLOGICAL ACCESSORIESFOR WOODWORKING." Technical Sciences and Technologies, no. 4(22) (2020): 57–64. http://dx.doi.org/10.25140/2411-5363-2020-4(22)-57-64.

Full text

Abstract:

Urgency of the research. The use of modern technological accessories allows increasing the productivity of woodworking pro-cesses, the accuracy and quality of wood products and furniture. Also, technological accessories allows to expand the technological capabilities of woodworking accessories, tools, to ensure safe working conditions during mechanical processing of wood.Target setting. When designing technological processes for woodworking and furniture production, the task of choosing or designing technological accessories always exists. For a reasonable choice or design of technological accessories in the woodworking industry, an analysis of the functional purpose is important.Actual scientific researches and issues analysisis devoted to works on the functional analysis of technical systems and the choice of technological accessories.Uninvestigated parts of general matters defining. At the moment, little attention has been paid to the issues of selection and design of technological accessories for woodworking and furniture production in the scientific literature. Analysis and systemati-zation of the functions of technological accessories for woodworking will allow for a more informed choice and design.The purpose of the articleis to determine the functions of technological accessories for woodworking and furniture pro-duction for a more informed choice and design.The statement of basic materials. based on the principles and approaches of the functional analysis of technical systems, the method of formulating the functional assignment of technological equipment for woodworking and furniture production is presented in the work. the main and auxiliary functions are formulated as an example of a conductor with an adjustable center distance. an example of the formulation of the functional assignment of a device for mechanical processing of a wooden blank is given.Conclusions. In this work, for the first time, a general approach to the functional analysis of technological accessories for woodworking is proposed. The functions of the technological accessories are determined and their applied application is demonstrated. The presented materials can be used for an informed choice or design of technological equipment for wood-working and furniture production.

APA, Harvard, Vancouver, ISO, and other styles

8

Matveev, V. I. "HEALTHCARE 2019." Kontrol'. Diagnostika, no. 262 (April 2020): 52–60. http://dx.doi.org/10.14489/td.2020.04.pp.052-060.

Full text

Abstract:

The article provides a brief description of the exhibition "Healthcare 2019", which was attended by 630 companies from 30 countries and 71 cities in Russia. It was possible to get acquainted with the modern system of health care organization, the necessary simple and complex medical equipment, numerous accessories and consumables. The exhibition presented: medical x-ray equipment of wide application (computer tomographs, mammographs, mobile devices), magnetic resonance imaging, ultrasound medical equipment, microscopes, endoscopic equipment, surgical navigation systems, as well as magnetic therapy, thermography and radiothermometry. The companies showed the best examples of modern medical equipment.

APA, Harvard, Vancouver, ISO, and other styles

9

Matveev, V. I. "HEALTHCARE 2019." Kontrol'. Diagnostika, no. 262 (April 2020): 52–60. http://dx.doi.org/10.14489/td.2020.04.pp.052-060.

Full text

Abstract:

The article provides a brief description of the exhibition "Healthcare 2019", which was attended by 630 companies from 30 countries and 71 cities in Russia. It was possible to get acquainted with the modern system of health care organization, the necessary simple and complex medical equipment, numerous accessories and consumables. The exhibition presented: medical x-ray equipment of wide application (computer tomographs, mammographs, mobile devices), magnetic resonance imaging, ultrasound medical equipment, microscopes, endoscopic equipment, surgical navigation systems, as well as magnetic therapy, thermography and radiothermometry. The companies showed the best examples of modern medical equipment.

APA, Harvard, Vancouver, ISO, and other styles

10

Zhang, Lei. "Application of New Materials in the Field of Sports Apparel." Advanced Materials Research 978 (June 2014): 31–35. http://dx.doi.org/10.4028/www.scientific.net/amr.978.31.

Full text

Abstract:

As a sports apparel clothing categories overall, in the broadest sense can be divided into professional sports apparel, sports everyday wear and sports accessories three categories. Professional sports apparel mainly athletes to participate in various sports competitions at the time of wearing apparel, the sport has its own characteristics, in order to adapt to the development of sports, professional sports apparel in the production process, new technologies, new processes, new fabrics should continue to appear, in order to make professional sportswear meet the requirements. Casual sports tend to be fashionable, but it retains the unique features part of sportswear. Sports accessories mainly involved in a number of areas of protective equipment and the use of equipment. The new thermal wicking fabrics, including fabrics, super-elastic fabric, waterproof and breathable fabrics, three-dimensional fabric composites, carbon fiber materials. These new materials for professional sports clothing, casual sportswear and sports equipment and sports goggles have a positive and practical impact. This paper studies the application of new fabrics in professional sports apparel, casual sportswear and sports protective appliances.

APA, Harvard, Vancouver, ISO, and other styles

11

Zhang, Xian Chao, and Jian Ping Xu. "Equipment Design of the Ship Sewage Treatment." Advanced Materials Research 201-203 (February 2011): 1486–91. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.1486.

Full text

Abstract:

A set of equipments for ship sewage treatment, which has been designed according to the characteristics of ship sewage with the advanced sewage treatment technique and the modern automatic control technique, makes ship sewage treatment miniaturized and automatized. The device takes biological method, + MBR Membrane Bioreactor, as the main treatment technique. After the reliability of the technique was justified through the simulation experiment, the mechanical structure of the equipment, including the detailed dimensions and relevant accessories, was designed according to the number of people. Besides, through PLC programmable controller the automatic operation and the automatic alarm have been achieved. As the result of the sewage treatment testing of the prototype, COD removal rate was above 92% , BOD5 removal rate above 98%, SS removal rate above 97%, the test value of heat-resistant Escherichia coli zero, totally meeting the IMO emission standards.

APA, Harvard, Vancouver, ISO, and other styles

12

Wijayanto, Danang Wijayanto, Yohanes Jhony Kurniawan, and Hariyatno Hariyatno Hariyatno. "ANALYSIS OF FACTORS AFFECTING CELLULAR BUSINESS INCOME IN SUKABUMI CITY 2019." Jurnal USAHA 2, no. 1 (June 30, 2021): 43–57. http://dx.doi.org/10.30998/juuk.v2i1.643.

Full text

Abstract:

This research was conducted to determine the influence of mobile phone sales, sales of credit vouchers and sales of handphone accessories to the revenue of cellular entrepreneurs in the City of Sukabumi. Data collection in research carried out by interview, observation and literature study. Test equipment used with multiple regression analysis, regression coefficient analysis, coefficient of determination with testing partial and simultaneous testing. This study used quantitative research methods aimed at testing predetermined hypotheses. The sample used in this study amounted to 40 respondents. Analysis of the data used is the multiple regression analysis test and the classic assumption test. From the results of the significance test, there is a significant simultaneous influence (together) of the variables of mobile phone sales, sales of credit vouchers and sales handphone accessories to the revenue of cellular entrepreneurs. While based on partial testing, there is a significant influence of mobile phone sales, sales of credit vouchers and sales of handphone accessories to the revenue of cellular entrepreneurs. And the order of variable contribution that influences the revenue of cellular entrepreneurs is the variable of sales of the credit vouchers, sales of handphone accessories and mobile phone sales.

APA, Harvard, Vancouver, ISO, and other styles

13

Oance, Ionuț-Sergiu, Sunai Gelmambet, and Andreea-Ramona Popa. "Tension and Compression Testing Machine for Friction Dampers." Ovidius University Annals of Constanta - Series Civil Engineering 21, no. 1 (December 1, 2019): 105–8. http://dx.doi.org/10.2478/ouacsce-2019-0012.

Full text

Abstract:

Abstract The present paper shows the advantages in using this prototype of tension and compression test machine proposed by the authors. The mechanical behaviour of different materials and components can be easily obtained by using this type of device. The equipment enables a simplified change between the types of testing performed. The operators can quickly and easily change elements and accessories used in testing. This equipment is the suitable choice for evaluating different types of friction dampers.

APA, Harvard, Vancouver, ISO, and other styles

14

Kitamura, Masatoshi. "Cultural-Grant Aid in Astronomy for Developing Countries from the Japanese Government." Transactions of the International Astronomical Union 24, no. 3 (2001): 312–13. http://dx.doi.org/10.1017/s0251107x00000997.

Full text

Abstract:

AbstractIn order to promote education and research in developing countries, the Japanese Government began in 1982 providing high-grade equipment within the scheme of its ODA (Official Development Assistance). Since then, for astronomical development, twelve planetaria have been donated to eleven countries and seven reflecting telescopes, with accessories, have been installed in Asian and Latin-American countries.

APA, Harvard, Vancouver, ISO, and other styles

15

Zaraś-Szydłowska, Agnieszka, Jan Badziak, Marcin Rosiński, Józef Makowski, Piotr Parys, Marek Piotrowski, Leszek Ryć, and Jerzy Wołowski. "High Power Laser Laboratory at the Institute of Plasma Physics and Laser Microfusion: equipment and preliminary research." Nukleonika 60, no. 2 (June 1, 2015): 245–48. http://dx.doi.org/10.1515/nuka-2015-0054.

Full text

Abstract:

Abstract The purpose of this paper is to present the newly-opened High Power Laser Laboratory (HPLL) at the Institute of Plasma Physics and Laser Microfusion (IPPLM). This article describes the laser, the main laboratory accessories and the diagnostic instruments. We also present preliminary results of the first experiment on ion and X-ray generation from laser-produced plasma that has been already performed at the HPLL.

APA, Harvard, Vancouver, ISO, and other styles

16

Rai, Praveer. "Disinfection of Endoscopy and Reusability of Accessories." Journal of Digestive Endoscopy 11, no. 01 (March 2020): 61–66. http://dx.doi.org/10.1055/s-0040-1712238.

Full text

Abstract:

AbstractCorona viruses are a group of medium-sized positive-sense single-stranded RNA viruses with crown-like structure due to projections noted over the surface of the virus. The infection has been declared as a pandemic by the world health organization (WHO) in March 2020. Health care professionals in endoscopy are at high risk of infection by novel corona virus disease 2019 (COVID-19) from inhalation of droplets, conjunctival contact, feces, and touch contamination. Upper gastrointestinal (GI) endoscopy is considered to be a high-risk aerosol-generating procedures (AGPs) and the live virus has been found in patient stool. Flexible endoscopes when contaminated have been considered as the vector for transmission of infections. Infections related to the side viewing endoscopes and endoscopic ultrasound scopes are more frequent than upper GI scope and colonoscopes. Stratifying patients needing endoscopy and deferral of elective procedures will help to decrease the virus spread. Planning and revision of workflows is necessary for safety of patient and staff and to successfully provide infection prevention and control measures, for this a “three zones and two passages” concept should be followed. Manual cleaning followed by high-level disinfection (HLD), effectively eliminates nearly all microorganisms from endoscopes during reprocessing. Transmission of viral infections during endoscopy is quite rare and, it is usually the result of noncompliance from the essential steps of reprocessing. Reuse of any disposable GI endoscopic device is strongly discouraged. Environmental decontamination is essential to reduce the risk of fomite transmission. Noncritical environmental surfaces frequently touched by hands (e.g., bedside tables and bed rails) and endoscopy furniture and floor should be considered heavily contaminated in patients with intermediate or high risk of COVID-19 and should be thoroughly disinfected at the end of each procedure. If available, negative pressure rooms are preferred for endoscopy, as has been advised by Centers for Disease Control and Prevention (CDC). Staff involved in reprocessing and the cleaning of endoscopy rooms should utilize personal protective equipment (PPE) including N95 mask. Reprocessing staff should undergo necessary training and ongoing annual assessment of competency.

APA, Harvard, Vancouver, ISO, and other styles

17

Ahmed, Md Kawser. "Multimedia Aided Language Teaching: An Ideal Pedagogy in the English Language Teaching of Bangladesh." American International Journal of Social Science Research 3, no. 1 (December 20, 2018): 39–47. http://dx.doi.org/10.46281/aijssr.v3i1.220.

Full text

Abstract:

Teaching English language around the globe is not only concentrated on grammars, series of writings and face to face interviews through conventional style but also centralized on the modern equipment, information and technology. Day to day updated accessories have made a tremendous progress in the pedagogy of English and ensured maximum benefits and acceptability among teachers and learners simultaneously. Observing the global usability and frequency, English language has appeared as a technology-but not as a language only but also as a channel of communication and language teaching. Application of multimedia in teaching-learning of English has earned best appreciation at any level of education and students have found English as an easy means of communication, conversation and interact with teachers with the blessing of multimedia and updated materials of language teaching. On the contrary, it is pitiful to observe that unavailability of modern accessories and elements in teaching English shows the namesake picture of multimedia used in third world countries especially in Bangladesh. This paper will focus on the significant progresses in the application of multimedia; take up of class with the aid of modern equipment and practical scenario of the use of multimedia in schools, colleges and universities of Bangladesh where multimedia based classroom is getting popular between teachers and students equally.

APA, Harvard, Vancouver, ISO, and other styles

18

Brogan, J. A. "Thermal-Spraying of Polymers and Polymer Blends." MRS Bulletin 25, no. 7 (July 2000): 48–53. http://dx.doi.org/10.1557/mrs2000.124.

Full text

Abstract:

Thermal-spraying of polymers can be traced back to the 1940s, when polyethylene (PE) was first produced by E.I. du Pont de Nemours & Company. Early work with flame-spraying guns was unsuccessful because the equipment, designed for spraying metals, produced a flame that was both too hot and too short to melt the PE without degradation. The technology has advanced considerably in the past 20 years. Flame-spray equipment and hardware accessories have been designed by numerous companies (PFS Thermoplastics, Alamo, Eutectic + Castolin, etc.) specifically for polymeric materials. The new equipment provides either a lower flame temperature or uses special cooling shrouds to cool the center of the flame, providing a longer residence time at a lower temperature. Many plastics can now be completely melted in-flight and allow heat-sensitive components to be coated with plastic.

APA, Harvard, Vancouver, ISO, and other styles

19

Burduhos-Nergis, Diana-Petronela, Gabriel Dragos Vasilescu, Dumitru-Doru Burduhos-Nergis, Ramona Cimpoesu, and Costica Bejinariu. "Phosphate Coatings: EIS and SEM Applied to Evaluate the Corrosion Behavior of Steel in Fire Extinguishing Solution." Applied Sciences 11, no. 17 (August 25, 2021): 7802. http://dx.doi.org/10.3390/app11177802.

Full text

Abstract:

Phosphate coatings are one of the most important methods in preventing metal corrosion, especially iron alloys. The high interest in this method for industrial applications is mainly due to the low costs associated with the phosphating solution component and technological process. Considering this aspect and the advantages offered to the materials (corrosion resistance, good adhesion, wear resistance), this study evaluates the potential of using the phosphate coating method in health and safety applications. Therefore, the deposition of a layer of zinc phosphate on the steel surface used in the manufacture of components for personal protective equipment was approached. Firefighters, during rescue/evacuation operations, use protective equipment for fall arrest, whose accessories (hooks, carabiners) are made of steel. Due to the low corrosion resistance property of carbon steel, these accessories must be replaced frequently. This paper aims to analyze the possibility of improving the corrosion resistance of carbon steel in a fire extinguishing solution. Accordingly, the electrochemical behavior of two different types of coatings was studied by electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM). In the literature, different corrosion evaluating methods or systems have been considered, and up until now, there has been no previous study to have approached the corrosive behavior of C45, phosphate C45, and painted phosphate C45 immersed in fire extinguishing solution.

APA, Harvard, Vancouver, ISO, and other styles

20

Redmon, D. T., W. C. Boyle, and B. G. Hellstrom. "Experiences in Field Testing a Variety of Aeration Equipment in Sweden and in the U.S.A. by Offgas Analysis." Water Science and Technology 21, no. 10-11 (October 1, 1989): 1421–29. http://dx.doi.org/10.2166/wst.1989.0338.

Full text

Abstract:

The background and theory of the offgas analysis procedure used in oxygen transfer testing of diffused aeration tanks is reviewed. Correlation of this method with other applicable procedures in parallel tests is reported. State-of-the-art equipment and accessories are described. Advantages of the procedure are identified, as are precautionary considerations regarding its use. Applications considered appropriate for its employment are delineated. Experience and test results in both Sweden and the U.S.A. on a variety of aeration devices are disclosed.

APA, Harvard, Vancouver, ISO, and other styles

21

Nurhalim, Riski, Gunarto Gunarto, Eko Sarwono, and Fuazen Fuazen. "Analisis Tingkat Efisiensi pada Sistem Pengkondisian Udara Gedung Auditorium di Universitas Muhammadiyah Pontianak." Creative Research in Engineering 1, no. 1 (January 17, 2021): 19. http://dx.doi.org/10.30595/cerie.v1i1.9215.

Full text

Abstract:

Observing various events such as the angle of sunlight, measuring the temperature of the outer wall, various accessories available and the types of activities carried out. Then do the calculations with CLTD (Cooling Load Temperature Difference) method based on ASHRAE 1997. The results obtained are cooling loads from such as brick walls with plaster layers, glass, aluminum alloy roofs, concrete and ceramic floors, lamps, occupants, electronic equipment. and 1,500 maximum number of people in the Pontianak Muhammadiyah Auditorium Building was 349.772,358 Watt or 132,60 PK. The current installed air conditioner has a capacity of 40 PK, so it needs 92,6 PK PK more or 19 units of cooling equipment, each of which has a capacity of 5 PK so that cooling in the room is more efficient.

APA, Harvard, Vancouver, ISO, and other styles

22

Mirowski, Zbigniew. "REQUIREMENTS FOR TRANSPORTATION OF DANGEROUS GOODS AND TASKS OF SAFETY ADVISERS." PROBLEMY TECHNIKI UZBROJENIA 145, no. 1 (May 15, 2018): 83–104. http://dx.doi.org/10.5604/01.3001.0012.1327.

Full text

Abstract:

The paper dwells on qualifications and obligations needed for persons responsible for transportation, packing, loading, filling or unloading of goods, concerning especially the importance and tasks of advisers on transportation safety of dangerous goods. Many factors influence the safe and smooth transport of dangerous articles. Regulations specify only general requirements for preparing documentation of shipment and marking the vehicle for carriage. The paper describes some faults which happen most often with documentation, marking, equipment and accessories of vehicles. The paper deals mainly with the road transport.

APA, Harvard, Vancouver, ISO, and other styles

23

Malko, José Adriano Cardoso, Rubens Brazetti, Michéle D. T. Casagrande, and Ben Hur de Albuquerque e Silva. "Application of Enzymes for Stabilization of Soils in Paving." Key Engineering Materials 668 (October 2015): 150–59. http://dx.doi.org/10.4028/www.scientific.net/kem.668.150.

Full text

Abstract:

In recent years, there was a great offer of patented additives (enzymes) to the road market as solution to soil stabilization. However, they are many times rejected because there are no theoretical foundation to prove such uses, and also because researches themselves don’t see research opportunities. Anyway, these products has been marketed, and frequently municipalities and states waste resources by choosing for a solution that is not yet well studied. This study aims to present a methodology to solve the problems that affects the use of additives in laboratory, because his use in conventional tests do not shown efficient for these purposes. For this, it was used a portable traffic simulator, easy handling and common in pavement laboratories. It is a standardized equipment, used to assess the effect of compression and the strain characteristics of asphaltic coating layers. It was developed a set with several accessories to mold samples in the shape of tablets (380 x 50 x 10 mm), may be easily adapted to the equipment selected as simulator. The soils used for the production of the tested tablets were lateritic soils from Rio de Janeiro–RJ, and the enzymatic products were imported. A rigorous care was followed in the production of each tablet to ensure equality and, after, compare results each other. These tablets were molded and tested in order to obtain a series of experimental results, comparing the soil treated with enzymes with the soil without any kind of treatment. The study concludes, in principle, that the equipment used and the developed accessories are appropriate for this purpose and that the use of enzymes showed effective for some applications, but lacks more studies, including with the use of other types of soil to prove such effectiveness.

APA, Harvard, Vancouver, ISO, and other styles

24

Mu, Lixiao, Xiaobing Xu, Zhanran Xia, Bin Yang, Haoran Guo, Wenjun Zhou, and Chengke Zhou. "Autonomous Analysis of Infrared Images for Condition Diagnosis of HV Cable Accessories." Energies 14, no. 14 (July 17, 2021): 4316. http://dx.doi.org/10.3390/en14144316.

Full text

Abstract:

Infrared thermography has been used as a key means for the identification of overheating defects in power cable accessories. At present, analysis of thermal imaging pictures relies on human visual inspections, which is time-consuming and laborious and requires engineering expertise. In order to realize intelligent, autonomous recognition of infrared images taken from electrical equipment, previous studies reported preliminary work in preprocessing of infrared images and in the extraction of key feature parameters, which were then used to train neural networks. However, the key features required manual selection, and previous reports showed no practical implementations. In this contribution, an autonomous diagnosis method, which is based on the Faster RCNN network and the Mean-Shift algorithm, is proposed. Firstly, the Faster RCNN network is trained to implement the autonomous identification and positioning of the objects to be diagnosed in the infrared images. Then, the Mean-Shift algorithm is used for image segmentation to extract the area of overheating. Next, the parameters determining the temperature of the overheating parts of cable accessories are calculated, based on which the diagnosis are then made by following the relevant cable condition assessment criteria. Case studies are carried out in the paper, and results show that the cable accessories and their overheating regions can be located and assessed at different camera angles and under various background conditions via the autonomous processing and diagnosis methods proposed in the paper.

APA, Harvard, Vancouver, ISO, and other styles

25

Gross, U., and P. Hagemann. "Modern TEM systems architecture." Proceedings, annual meeting, Electron Microscopy Society of America 44 (August 1986): 602–5. http://dx.doi.org/10.1017/s0424820100144486.

Full text

Abstract:

By addition of analytical equipment, scanning transmission accessories and data processing equipment the basic transmission electron microscope (TEM) has evolved into a comprehensive information gathering system. This extension has led to increased complexity of the instrument as compared with the straightforward imaging microscope, since in general new information capacity has required the addition of new control hardware. The increased operational complexity is reflected in a proliferation of knobs and buttons.In the conventional electron microscope design the operating panel of the instrument has distinct control elements to alter optical conditions of the microscope column in different modes. As a consequence a multiplicity of control functions has been inevitable. Examples of this are the three pairs of focus and magnification controls needed for TEM imaging, diffraction patterns, and STEM images.

APA, Harvard, Vancouver, ISO, and other styles

26

Kissiková, Lenka, and Ivan Dlugoš. "COMPREHENSIVE EVALUATION OF THE WORK AT HEIGHT." Acta Metallurgica Slovaca 24, no. 1 (March 22, 2018): 100. http://dx.doi.org/10.12776/ams.v24i1.1006.

Full text

Abstract:

The article evaluates the issue of work at heights in industry and reports statistics on fatal accidents at work, the source of which is a fall from above. It also deals with the assessment of the state of personal protective equipment already in use - for example, safety and working ropes and other accessories contaminated with facade paints, lyes, acids or mineral oils and their misuse and dangerous use. The state of the assessed personal protective equipment used was assessed in a test facility on test machines, where the safety of these devices was verified under certain conditions. The article also mentions the issue of inadequate training and training of high-level workers and the lack of training centers that carry out such training.

APA, Harvard, Vancouver, ISO, and other styles

27

Paccos, José Luiz, Ivandro Paulo de Lima, Viviane Rissio Borba de Lima, and Natália Sayuri Mukai. "Ventilation mask adapted for endoscopy during the COVID-19 pandemic." Revista da Associação Médica Brasileira 66, suppl 2 (2020): 55–57. http://dx.doi.org/10.1590/1806-9282.66.s2.55.

Full text

Abstract:

SUMMARY In the context of the COVID-19 pandemic, endoscopy services must adopt preventive measures to maintain proper functioning due to a high risk of disease contagion. Triage protocols before and after the procedure, personal protective equipment, and environmental contamination control are some of the endoscopy society’s recommendations. However, the risk of infection may remain high due to poor control over the source of contamination.Using a combination of standardized supplies and accessories in a hospital, a ventilation mask adapted to be used in endoscopic procedures is proposed to reduce COVID-19 contamination.

APA, Harvard, Vancouver, ISO, and other styles

28

Korol, Elena, and Oleg Korol. "Modelling of energy consumption at construction of high-rise buildings." E3S Web of Conferences 33 (2018): 02076. http://dx.doi.org/10.1051/e3sconf/20183302076.

Full text

Abstract:

High-rise building structures in the course of its erection suppose primary use of methods provided for erection, concrete and external finishing works. Erection works do not differ significantly from usual ones: traditional equipment, accessories and techniques are used which are based on erection of structures in project position using a crane. Structures to be assembled in building frame include steel columns and beams, wall panels, form elements of columns, walls and floor structures. We can note heightened attention to operational control for quality of erection, but it is attributable to all works in the course of high-rise construction. During high-rise erection by means of cast in-situ reinforced concrete all formworks to be used do not have any special differences except systems specially designed for high-rise erection using sliding formwork or vertical traveling forms. In these systems special attention is paid to safety of elevated works. Working methods of placement and curing of concrete and structures as a whole remain traditional – the requirements for controlling such operations become toughened. The most evident differences in high-rise erection with regard to equipment, machinery and accessories used are in means provided for load transportation and safety of works at heights. Particularity of internal finishing works which are also obligatory during construction of skyscrapers allows not considering them in as technological differences from usual construction as far as the «height» of its execution is limited by height of particular floor and determined by price and building class.

APA, Harvard, Vancouver, ISO, and other styles

29

Huang, Dongping, Yingke Zhuang, and Shaojie Lin. "Optimal design of nozzle for filter bag cleaning device of combined air-conditioning based on fluid mechanics." Thermal Science 24, no. 3 Part A (2020): 1601–7. http://dx.doi.org/10.2298/tsci190705027h.

Full text

Abstract:

Nozzles are terminal accessories and important parts of equipment for spraying high speed water flow. The shape of nozzle is the main reason that affects the change of pressure and velocity field. For this reason, this paper uses ANSYS software to monitor the pressure and velocity distribution of the internal flow field of nozzle and the high-speed flow field outside the nozzle. In the paper are compared and analyzed the flow field changes due to different nozzle shapes and the influences of various parameters on the nozzle flow field, providing a reference for the rational use of the structural parameters of nozzle.

APA, Harvard, Vancouver, ISO, and other styles

30

Chang, Paul, Diana Kaledina, Anatoly Popovich, and Andrey Volkov. "Factories of the future: operation and perspectives of development." SHS Web of Conferences 44 (2018): 00022. http://dx.doi.org/10.1051/shsconf/20184400022.

Full text

Abstract:

The role of automation in industrial development was highlighted. We discussed the significance of automation for creating the factory of the future. We presented the basic criteria of efficiency of automated factories. We analyzed the experience of creating automated factories, indicated the basic scientific-technical problems related to automation of production and suggested the ways to overcome them. We listed the basic factors of scientific-technical progress that should be the basis for automation of production and indicated its basic elements. We showed the role of technological equipment, tools and accessories. We analyzed the results of state support of industry.

APA, Harvard, Vancouver, ISO, and other styles

31

Wang, X. M., T. L. Huang, X. C. Guo, and F. L. Wang. "An In Situ Acid Wastewater Treatment Equipment for Laboratory." Applied Mechanics and Materials 178-181 (May 2012): 437–40. http://dx.doi.org/10.4028/www.scientific.net/amm.178-181.437.

Full text

Abstract:

The random discharge status of acid wastewater in laboratory is a potential hazard to the municipal drainage system, wastewater treatment system and water resources. In this paper, an in-situ acid wastewater treatment equipment for laboratory is suggested. It is composed of an acid wastewater tank, an alkali wastewater tank, a neutralization tank, a washing gas box, pipes and other accessories. It can make the best use of the alkali wastewater produced in the laboratory to deal with the acid wastewater on site. The neutralization reaction takes place in the neutralization tank, and the solution reacted couldn’t be discharged into the indoor drainage pipeline until its pH qualifies the standard. Through the sludge discharge pipe, the deposits can be collected individually, and then be hurtlessly treated and reused. Meanwhile, through the washing gas box the waste gas is decontaminated and discharged into atmosphere. So it can not only reduce the environmental pollution but also lower the treatment cost which corresponds with the idea of green laboratory. This equipment has the economical, practical, and workable property. Not only that, through a reasonable transformation, it is also suitable for other kinds of wastewater, so it has a certain technical populization value.

APA, Harvard, Vancouver, ISO, and other styles

32

Beroun, Stanislav, Pavel Brabec, Ondřej Dráb, and Robert Voženílek. "Influence of the Mean Friction Pressure on the Temperatures of the Combustion Engine." Applied Mechanics and Materials 390 (August 2013): 350–54. http://dx.doi.org/10.4028/www.scientific.net/amm.390.350.

Full text

Abstract:

The development of a new combustion engines is connected with endeavor for escalation of the total efficiency. Escalation of the total efficiency can be: minimization of the mechanical losses in the combustion engines or minimization of the unsuitable equipment capacity of accessories. Now research and development programs of a manufacturer of the combustion engines search effectual equipment and method for this escalation of the total efficiency. The escalation of the total efficiency is important for a minimization fuel consumption and consequently for lower emissions. The paper deals with the problem of frictional losses in internal combustion engines. It is described by measuring station built and further are shown measured values for a small car. Furthermore, in the paper presented to the selected function to approximate the measured values of friction losses, depending on the temperatures of the work fluids for a concrete RPM mode.

APA, Harvard, Vancouver, ISO, and other styles

33

Wang, Jia, Dao Hua Lu, and Song Lian Xie. "Exploit of Shipping Auxiliary Swing Test Platform." Advanced Materials Research 815 (October 2013): 821–26. http://dx.doi.org/10.4028/www.scientific.net/amr.815.821.

Full text

Abstract:

Shipping auxiliary swing test Platform is a kind of test device which can complete performance tests of the ship auxiliary equipment by simulating the motion of ships in the laboratory environment. This article presented a swing test-bed with high torque dynamic load of three-degree of freedom (3-DOF), simulated mainly the motion of rolling, pitching and heaving in a specific sea state. Put forward some comparison and design of the structure schemes against the requirement of high torque load, choose the best scheme according to the test requirement, and introduce some key accessories design of the made reliability accounting on the key mechanical structure of the swing test-bed.

APA, Harvard, Vancouver, ISO, and other styles

34

Gonzatti, Frank, Vinícius Nizolli, Fredi Zancan Ferrigolo, Felix Alberto Farret, and Marcos Augusto Silva de Mello. "Experimental Hydrogen Plant with Metal Hydrides to Store and Generate Electrical Power." International Journal of Emerging Electric Power Systems 17, no. 1 (February 1, 2016): 59–67. http://dx.doi.org/10.1515/ijeeps-2015-0081.

Full text

Abstract:

Abstract Generation of electrical energy with renewable sources is interruptible due to the primary energy characteristics (sun, wind, hydro, etc.). In these cases, it is necessary to use energy storage so increasing penetrability of these sources connected to the distribution system. This paper discusses in details some equipment and accessories of an integrated power plant using fuel cell stack, electrolyzer and metal hydrides. During the plant operation were collected the power consumption data and established the efficiency of each plant component. These data demonstrated an overall efficiency of about 11% due to the low efficiencies of the commercial electrolyzers and power inverters used in the experiments.

APA, Harvard, Vancouver, ISO, and other styles

35

Setio Aji, Nugroho. "Pengenalan Produk dan Promosi Alat Berat Hydraulic Excavator." Bulletin of Management and Business 1, no. 1 (March 2, 2020): 36–43. http://dx.doi.org/10.31328/bmb.v1i1.32.

Full text

Abstract:

This research explains 320D2 GC Hydraulic Excavators. This study uses a qualitativemethod with a literature approach. Data collection was obtained from several sourcesfrom scientific books, research reports, scientific essays, theses and dissertations,regulations, provisions, yearbooks, encyclopedias, and sources which cannot bediscussed accurately electronically.The results showed that the product features possessed by Hydraulic Excavators type320D2 GC are technology, perceived usability, and convenience of use. As for productquality, brand utility, accessories, and guarantees. In the promotion of 320D2 HydraulicExcavators heavy equipment there are special offers, support, joint ventures, andcampaigns.Limitations / Implications for research are limited to product introduction andpromotion so further research needs to follow up on this research using differentresearch methods.

APA, Harvard, Vancouver, ISO, and other styles

36

Sun, Yong Sheng, Xiao Qiang Yang, Li Pei, and Sun Yan. "Fault Diagnosis of Mechanized Bridge’s Electrical System Based on I²C-bus and Virtual Instrument Technology." Applied Mechanics and Materials 597 (July 2014): 444–49. http://dx.doi.org/10.4028/www.scientific.net/amm.597.444.

Full text

Abstract:

The electrical system fault testing and diagnosis system based on I2C-bus and embedded equipment is proposed. This system is accomplished with the integration of PXI-based computer, field fault testing platform, dedicated interface adapter unit and accessories with software program of virtual instrument and database management and fault guidance system. It can obtain various state parameters of the heavy mechanized bridge by interface adapter unit and corresponding sensors. The dedicated interface adapter unit, that is the core of the hardware platform is composed of chassis, embedded microcomputer controller, I2C-bus data acquisition modules, VPC connection package and military aviation sockets. Because of its flexibility and modular design, it can support different data conversion, for example, analog, digital, and serial, while functioning as an intelligent conversion bridge between field fault testing platform or PXI computer and electrical system of heavy mechanized bridge electrical system. The fault diagnosis software is of hierarchical modular structure with integration of system management control, fault detection and circuit hardware driver modules together with fault repair and diagnosis database. Therefore it provides functions of human-machine interaction, equipment fault detection, fault diagnosis and analysis, as well as repair and maintenance guidance The fault testing and diagnosis system in this work is also featured with handy structure, lightweight, low consumption, large storage capacity, excellent expandability and intelligent inference capability. The system can be used in the online fault testing and diagnosis of similar engineering equipments. So it has important engineering and military application value to the rapid fault testing and fault diagnosis of engineering equipments.

APA, Harvard, Vancouver, ISO, and other styles

37

Sunarta, Sunarta, Alexander Victor Bukit, Arie Marbandi, and Kusdianto Kusdianto. "DESIGN OF INDONESIAN NAVY PERSONAL EQUIPMENT MONITORING SYSTEM BASED ON ANDROID MODEL." JOURNAL ASRO 11, no. 2 (April 20, 2020): 90. http://dx.doi.org/10.37875/asro.v11i2.272.

Full text

Abstract:

Kaporlap is individual equipment that is attached to the body of a soldier, including all accessories, ranging from headgear, body cover to leg cover. These individual equipment were distributed so that each soldier could carry out basic tasks or routine daily tasks and the additional tasks provided could run well. Design and Development of the Navy-based College of Technology Kaporlap Monitoring System (STTAL) Android-based is an information system designed to make it easier for Kaur warehouse to make a report to the Kadeprenalog to find out stock information available at Renalog warehouse when it will distribute Kaporlap to Personnel and Students. Data collection methods used in the preparation of this final project are field studies and literature. After being identified, the authors designed the Kaporlap inventory system with systems development models such as context diagrams, Data Flow Diagrams (DFD), Entity Relationship Diagrams (ERD) through to Input and Output designs, then proceed with the making of its web program and after that it can uploaded to the android system. After the whole system process is complete, it can be seen that the inventory system can produce information for official needs accurately and quickly.Keywords : Kaporlap Inventory System, Web Data, Android Applications.

APA, Harvard, Vancouver, ISO, and other styles

38

Huang, Juan Ru, Chang Chun Xu, Yong Li Sun, Zhen Yan Cao, Ji Gang Wang, and Ke Jian Yang. "The Process to Recover Soda Ash from Mining Solution in a Pilot Plant." Advanced Materials Research 322 (August 2011): 224–29. http://dx.doi.org/10.4028/www.scientific.net/amr.322.224.

Full text

Abstract:

The process to recover soda ash from mining solution is combined CO2stripping with falling film evaporation, and the stripping operation is the key step in the process, the processing installations include a CO2stripping tower, falling film evaporators and other accessories. The stripping and combined operation(linking CO2stripping with falling film evaporation) are implemented to examine tower operational conditions and ascertain how to efficiently concentrate mining solution, respectively. As a result, after the better design scheme(17-meter height packing) is evidently proposed and the process design is also favorably optimized, such as diminishing equipment sizes in a following industrial scale. Besides, the work also analyzes the solubility of Na2CO3and NaHCO3in H2O and discusses its probable equilibrium in the operation.

APA, Harvard, Vancouver, ISO, and other styles

39

Ma, Li Qiang, Dong Sheng Zhang, Jin Long Jia, and Yong Sheng Li. "Development and Application of ZY6400/25/53 Two-Leg High Cutting Hydraulic Shield Supports." Applied Mechanics and Materials 121-126 (October 2011): 3220–24. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.3220.

Full text

Abstract:

We have independent developed ZY6400/25/53 two-leg high cutting hydraulic shield supports firstly, which width was 1.5 m could adapt to much complicated geological conditions, reduced the hydraulic support and accessories costs, and solved the problems of supports’ stability efficiently. Industrial tests showed that the supports application were successful and effective. We realize the high efficient production, the average yield reach to the level of 10000 t/d, if mine system have working conditions, the coalface have the ability produce 5Mt coal annually. This hydraulic support greatly improve the coal resources mining rate, broaden the application range of the high cutting fully mechanized mining technology in China, and led the upgrade of mechanized equipment.

APA, Harvard, Vancouver, ISO, and other styles

40

Willey, Thomas, and Douglas Robideaux. "The National Golf Foundation Top 100 Businesses in Golf: Investigating the Portfolio Returns vs the Market Portfolio." Archives of Business Research 9, no. 4 (April 23, 2021): 96–100. http://dx.doi.org/10.14738/abr.94.10039.

Full text

Abstract:

In early 2018, the National Golf Foundation (NGF) presented their inaugural list of the top 100 businesses in the approximately $70 billion golf industry. Six sectors of the U.S. Economy are represented by the following breakdown of companies: Equipment (22 firms); Turf and Course Supplies (18); Apparel and Accessories (13); Course Management (13); Media/Technology and Associations, Retail and Other (23). The purpose of our research is to determine if an investor could generate above-market returns by investing in a portfolio of the publicly traded firms that are part of this initial list. Our results, indicate that over the entire sample period, three golf related stocks outperformed the overall market index after adjusting for risk.

APA, Harvard, Vancouver, ISO, and other styles

41

Pandey, Rudresh, L. Sudershan Reddy, Vidush Chaudary, Venny Tezaryning Widyawati, Liem Gai Sin, Muhammad Khairul Amali Bin Mohd Ghazali, Daisy Mui Hung Kee, Muhammad Firdaus Bin Ibrahim, Muhammad Zulhusni Bin Ahmad Fadzeil, and Nur Azwanie Binti Mohamed. "Analysis the Effect of Product Quality and Price on Purchase Decision (Case Study of Adidas India, Indonesia, and Malaysia)." International Journal of Accounting & Finance in Asia Pasific 4, no. 1 (February 27, 2021): 71–85. http://dx.doi.org/10.32535/ijafap.v4i1.1034.

Full text

Abstract:

Exercising can be an activity to maintain human health. Adidas is a company providing sports equipment and accessories with high quality located in more than 100 countries around the world. This research aims to understand and analyze the effect of product quality and price on the purchase decision of Adidas India, Indonesia, and Malaysia. This research uses a quantitative method, which is Ordinary Least Square (OLS) based on the data collected from the questionnaires with 100 respondents. The results of this research show product quality and price partially affect purchase decision, product quality and price simultaneously or collectively affect purchase decision. The contribution proportion of Adidas product quality and price on the customers' purchase decision is 50.1%.

APA, Harvard, Vancouver, ISO, and other styles

42

Melodi, Adegoke Oladipo, and Sola Richard Famakin. "A Review of Solar PV-Grid Parity in Akure, South-West Nigeria." International Journal of Electrical and Computer Engineering (IJECE) 5, no. 5 (October 1, 2015): 879. http://dx.doi.org/10.11591/ijece.v5i5.pp879-886.

Full text

Abstract:

The abundance of solar energy in Akure, South-West Nigeria and its feasibility as an alternative energy source has been proven. However, cheap, Government subsidized but unreliable grid electricity and high cost of solar equipment are considered the major hindrances to deployment of solar energy for improved power supply and environmental sustainability. An earlier work pointed out realistic pricing of electricity, reduced cost of solar equipment and reduction in solar cell degradation factor as major factors capable of speeding up parity hence, motivating solar energy consumption. It showed that parity is attainable within 14 years. Documented significant improvements in these factors in recent times are the motivations for this review. This review cost-comparatively re-assesses both sources of energy under the prevailing National electricity policy and market realities using simple mathematical and graphical modeling techniques. This is with a view to determining a new timing for parity of solar energy with grid supply. Results showed that solar PV-grid energy cost parity is now attainable within 6 years in the study region. It was also observed that sustained improvement in grid energy unit cost and reduction in cost of solar equipment and accessories may accelerate solar-grid energy parity to less than three years.

APA, Harvard, Vancouver, ISO, and other styles

43

Fengfan, Ju. "Present Situation and Future Development Trend of Smart Clothing." Journal of Arts and Humanities 6, no. 8 (September 7, 2017): 54. http://dx.doi.org/10.18533/journal.v6i8.1232.

Full text

Abstract:

With the rapid development of science and technology, our daily clothes are changing quietly. Wearable smart clothing has gradually the leading role in the clothing market. This article first explains the concept of wearable intelligent clothing in china, and then I analyze the various types of wearable smart clothing that is currently facing problems, and summarized about the key points and future directions of wearable intelligent clothing design. From the beginning of 2013, smart watches, bracelets, glasses have entered the public vision, become a "trendsetter who sought the object", this year the industry was identified as "the first year of wearable equipment". In simple terms, a wearable device is a portable device that can be worn directly on the body, or integrated into the user's clothing or accessories. However, with the development of wireless sensor technology, kinds of wearable smart clothing gradually appeared in people's life, the smart clothing is made up of small chip, electronic components, power equipment, embedded into clothing, can achieve a specific function, in order to facilitate people's life.

APA, Harvard, Vancouver, ISO, and other styles

44

Suleiman Al Maktoumi, Iman, Firdouse Rahman Khan, and Ahmed Rashid Suwied Al Maktoumi. "ASSESSING THE FACTORS CAUSING PROJECT COMPLETION DELAYS IN THE CONSTRUCTION SECTOR OF OMAN USING SEM-PLS." Humanities & Social Sciences Reviews 8, no. 3 (June 16, 2020): 900–912. http://dx.doi.org/10.18510/hssr.2020.8394.

Full text

Abstract:

Purpose: The objectives of the study were to investigate the causes of the delays to analyze the factors causing the construction delay in Oman and to investigate the effects of such delays. Design/methodology/approach: To carry out this study 210 samples were collected through a well-defined questionnaire from the construction stakeholders viz. the consultants, contractors, and the clients who were selected on a random sampling basis. Smart PLS for Structural Equation Modeling (SEM) technique was used to analyze the data to obtain the formative measurement models, the structured model, and the goodness of fit. Findings: The results of the study reveal that the client-related factors, equipment-related factors, and material related factors have a significant impact on the completion delay in construction projects. The findings of the study also revealed that the Client related factors were – Delay in providing services, Delayed decision-making process, Allocation of insufficient time. Equipment related factors were – Existing low productive equipment, Unskillful Equipment operator, Breakdown of equipment and Outdated equipment; Material related factors were – Delay in supply of raw materials, Non-availability of materials, Change of materials during construction, Non-availability of accessories and Damaged materials. Research limitations/Implications: The present study covers the stakeholders of the construction projects from selected regions only. The future studies can be extended to other projects and other regions as well. Social implications: The study suggested that the clients’ cooperation especially in providing the contractors with the necessary equipment, facilities, and sufficient time will avoid such delays of the construction projects in Oman. Originality/Value: Only very few have examined the completion delay of the construction projects in Oman using SEM-PLS and it is a first-hand study of its kind and the results will be useful to the stakeholders.

APA, Harvard, Vancouver, ISO, and other styles

45

CHEN, QIONG, and YUAN-JUN LV. "RESEARCH ON A NEW HARDNESS TESTING DEVICE BASED ON VIRTUAL DESIGN." Journal of Advanced Manufacturing Systems 09, no. 02 (December 2010): 161–63. http://dx.doi.org/10.1142/s0219686710001879.

Full text

Abstract:

Structure optimization of Hardness Testing Device (HTD) based on virtual design is proposed here. The purpose of the HTD is to obtain hardness properties of accessories. Since the creation of the previous HTD, a few problems have been experienced during testing. In the present work, improvements in both equipment design and automation control have been made. A realistic digital analysis is generated by combining automated and interactive approaches to evaluate the capability of the device with simulation software ADAMS and AMESim. Theoretical analysis is taken into account to obtain numerical results close to reality. The approach and the conclusions should be useful for composite structures design. The improved design of HTD reduces the number of costly physical prototypes, improves design quality and reduces product development time.

APA, Harvard, Vancouver, ISO, and other styles

46

Sinev, Andrey Y., Roman A. Panasenko, Vlada S. Shamkova, Gennady K. Baryshev, and Aleksandr Vasilievich Berestov. "Sample Printing Device for Additive Manufacturing of Electronic Housings." Materials Science Forum 1037 (July 6, 2021): 105–10. http://dx.doi.org/10.4028/www.scientific.net/msf.1037.105.

Full text

Abstract:

This work presents the results of work on a 3D printing device with a non-standard arrangement of the table and nozzle, which is necessary for the additive production of plastic cases for electronic devices. The non-standard arrangement of the table is caused by the need to use special accessories to hold third-party embedded elements of the case. A metal part - a contactor - is used as an embedded element. Due to the specific mortgage they made, as well as the experimental equipment, the authors came to the conclusion that it is economically more expedient to design and manufacture a prototype 3D printer than to modify the existing device. A sample of the FDM printing device was designed, manufactured and tested.

APA, Harvard, Vancouver, ISO, and other styles

47

Lamarche, Alain, and Pierre Samson. "DEVELOPMENT OF AN EQUIPMENT MAINTENANCE MANAGEMENT SUPPORT SYSTEM." International Oil Spill Conference Proceedings 2008, no. 1 (May 1, 2008): 453–57. http://dx.doi.org/10.7901/2169-3358-2008-1-453.

Full text

Abstract:

ABSTRACT The effectiveness of spill response organizations to handle incidents much depends on the use of well trained personnel and specialized equipment. Knowing where equipment is located, and ensuring that it is ready to use and in good working order are both vital to the planning and management of a response. It is with these goals and concerns that the Eastern Canada Response Corporation (ECRC) recently decided to update its computerized equipment inventory and maintenance system. An analysis showed that commercially equipment maintenance support systems were not well adapted to the general maintenance processes and tasks used within the organization, were too complex and were not flexible enough. For this reason, an entirely new system was created to support the management of equipment maintenance. The system was developed using Microsoft Access, with a file server architecture allowing many users to access each of 6 regionally maintained equipment databases. A simple internet based mechanism was developed to enable merging of each of the database for consultation for inventory purposes. Some of the functions included:– Support for the planning of each of 4 types of maintenance, including preventive, license renewal, safety inspections and enhancements or repairs;– A simple mechanism allowing the user to indicate that a piece of equipment is located within another piece of equipment.– The capacity to associate lists of accessories to pieces of equipment– Storage and retrieval of predefined maintenance processes description Support was also provided to the planning of equipment repair or enhancements through the production of itemized and dated tasks lists. Some other additional features included: the management of equipment names, to prevent proliferation of names for essentially similar pieces of equipment; the inclusion of a “query-by-example” mechanism for equipment search; and the capacity to export any or all data to a spreadsheet, in order to enable flexible analysis and planning. The system was also designed in a way to make it easy to upgrade to a database server architecture, should the need arise. The approach used for the system development and implementation would be applicable to any small to medium size response organization.

APA, Harvard, Vancouver, ISO, and other styles

48

Krivolapov, V. L., A. F. Strakhov, and M. V. Komarov. "SELECTION OF REPAIR OPTIONS FOR FAULTY REPLACEABLE COMPONENTS AND AGGREGATES INCORPORATED IN AD WME FROM THE PERSPECTIVE OF MILITARY ECONOMIC AND TECHNICAL FEASIBILITY." Issues of radio electronics, no. 6 (June 20, 2018): 49–53. http://dx.doi.org/10.21778/2218-5453-2018-6-49-53.

Full text

Abstract:

A main number of AD WME failures is caused by replaceable components (RCs) failures of radio-electronic equipment (REE). However, a significant part of the RCs is repairable, i.e. their operability can be restored by means of repair. The repaired RCs and aggregates from the AD WME component parts can be further returned to form a part of spare tools and accessories and used as intended to repair the AD WME component parts by an aggregate method. Until recently, a main option of faulty RCs and aggregates repair arrangement has been their delivery to industrial enterprises for repair. It resulted in delivery delays of the repaired RCs and aggregates incorporated in the AD WME pieces, a necessity to increase a number of the RCs in spare tools and accessories kits, as well as in value appreciation of the AD WME operation. Owing to creation of unified mobile organizational repair systems in JSC Principle Production and Technical Company Granit, now there is an opportunity of current repair of the faulty RCs and aggregates delivered for these purposes to deployment sites of the maintainable AD WME within the unified mobile organizational repair systems. The article considers the issues related to military technical and economic feasibility of implementing the options of RCs and aggregates repair organization: in the field environment (applying the unified and mobile organizational repair systems), at fixed-site maintenance organizations, and at manufacturing facilities.

APA, Harvard, Vancouver, ISO, and other styles

49

BONIFACIO, MATTEO, ANTONIA DONÀ, ALESSANDRA MOLANI, and LUCIANO SERAFINI. "Context matching for electronic marketplaces: a case study." Knowledge Engineering Review 18, no. 4 (December 2003): 317–28. http://dx.doi.org/10.1017/s0269888904000128.

Full text

Abstract:

Matching algorithms automatically discover semantic relations between two autonomously developed conceptual representations of two overlapping domains. Typical examples of such conceptualisations are electronic market catalogues (e.g., unspsc and eCl@ss) and Web directories (e.g., google and yahoo). The objective of this paper is the description of a use case in which the matching algorithm CtxMatch, developed at ITC-IRST and the University of Trento, has been used to re-classify into the Universal Standard Products and Services Classification (unspsc) the catalogue of office equipment and accessories used by a worldwide telecommunication company to classify its suppliers. On the basis of this experience we are envisaging new applications of the algorithm in the area of demand aggregation. We conclude the paper by briefly describing a future application in this area.

APA, Harvard, Vancouver, ISO, and other styles

50

Klemp, Marianne, Sophie Cros, and Mitchell Sugarman. "TRANSCATHETER AORTIC VALVE IMPLANTATION AND ADAPTIVE / PROGRESSIVE COVERAGE." International Journal of Technology Assessment in Health Care 30, no. 3 (July 2014): 250–51. http://dx.doi.org/10.1017/s0266462314000312.

Full text

Abstract:

Transcatheter aortic valve implantation (TAVI or TAVR) is a newly introduced medical procedure enabled by a new device. Although its introduction does not represent that of all medical devices, it does illustrate a situation in which a device provides a new alternative to standard care in a specific group of patients. Unlike drugs, the medical device category is highly heterogeneous and includes both diagnostic and treatment (accessories, implantable, enablers) and capital equipment. The TAVI- case was discussed as one of the examples in the Policy Forum Meeting and the authors were acting as facilitators that summed up both the case as presented and the discussion between the members that followed. We wish to give a special thanks to the participants of the group work for their input to the discussion.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Equipment and accessories'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles