Log in

Relevant bibliographies by topics / Equipment load / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Equipment load.

Dissertations / Theses on the topic 'Equipment load'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Equipment load.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Erwin, James William. "Rooftop equipment wind load and mitigation techniques." FIU Digital Commons, 2008. http://digitalcommons.fiu.edu/etd/3149.

Full text

Abstract:

Rooftop equipment failures pose significant threats during tropical cyclones because detached equipment may hinder post-storm recovery efforts, delay building re occupancy, and become windbore debris. The objectives of this study were to measure the wind loads exerted on a full scale rooftop equipment specimen, and to develop mitigation techniques that would alleviate severe rooftop equipment wind loads. A test building was outfitted with a/c condenser units, which were instrumented with force and pressure transducers to measure the aerodynamic loading effects. The study found that lateral fo

APA, Harvard, Vancouver, ISO, and other styles

2

Ahmed, Toqeer. "Load balancing solution and evaluation of F5 content switch equipment." Thesis, Högskolan Dalarna, Datateknik, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:du-2356.

Full text

Abstract:

The Thesis focused on hardware based Load balancing solution of web traffic through a load balancer F5 content switch. In this project, the implemented scenario for distributing HTTPtraffic load is based on different CPU usages (processing speed) of multiple member servers.Two widely used load balancing algorithms Round Robin (RR) and Ratio model (weighted Round Robin) are implemented through F5 load balancer. For evaluating the performance of F5 content switch, some experimental tests has been taken on implemented scenarios using RR and Ratio model load balancing algorithms. The performance i

APA, Harvard, Vancouver, ISO, and other styles

3

Ramsey, Jack S. "Shipboard applications of non-intrusive load monitoring." Thesis, Monterey, California. Naval Postgraduate School, 2004. http://hdl.handle.net/10945/1475.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tutton, William M. "Exploring, evaluating and improving the development process for Military Load Carrying Equipment." Thesis, Loughborough University, 2009. https://dspace.lboro.ac.uk/2134/6032.

Full text

Abstract:

This work sought to explore, evaluate and then improve the process of development for personal Military Load Carriage Equipment (MLCE), such as rucksacks. It was suspected that current MLCE had a number of user interaction deficiencies which should have been addressed during development. Three research questions were posed to determine: the influences on MLCE development, what needed improvement in MLCE development and how MLCE development could be improved. The work was based on eight studies conducted in three phases: the first to explore MLCE development and the observed deficiencies, the s

APA, Harvard, Vancouver, ISO, and other styles

5

Obermayr, Martin [Verfasser]. "Prediction of Load Data for Construction Equipment using the Discrete Element Method / Martin Obermayr." Aachen : Shaker, 2013. http://d-nb.info/1049382684/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Lesniak, Ashley Y. "THE EFFECT OF PERSONAL PROTECTIVE EQUIPMENT ON FIREFIGHTER OCCUPATIONAL PERFORMANCE." UKnowledge, 2017. https://uknowledge.uky.edu/khp_etds/45.

Full text

Abstract:

Firefighting is a strenuous occupation that requires high-intensity work, resulting in prolonged periods of stress and physical exertion. The physical demand of performing firefighting tasks is augmented by the weight of personal protective equipment (PPE) worn (i.e., load carriage: LC) and the use of a self-contained breathing apparatus (SCBA). These factors have been shown to increase metabolic demand at submaximal workloads and decrease maximal aerobic capacity in laboratory settings. However, there is limited research evaluating the effects of these factors on occupational performance. The

APA, Harvard, Vancouver, ISO, and other styles

7

Karlsson, Klas. "Load flow control and optimization using phase shifting equipment in combination with Banverkets rotating converters." Thesis, KTH, Elektriska energisystem, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-118933.

Full text

Abstract:

The purpose of the thesis was to further investigate the possibility to complement the rotary converters with a phase shifting device as a continuation of the work done in the master thesis; Load flow control and optimization of Banverkets 132 kV 16 2/3 Hz high voltage grid. With this modification, rotating converters can be used almost as flexible as static converters. The earlier thesis has come to the conclusion that the best way of compensating the phase displacement is with a series inductance. In this thesis the possibility to use capacitors instead of or in combination with inductors wa

APA, Harvard, Vancouver, ISO, and other styles

8

Hardy, Raymond J. "Selection criteria for loading and hauling equipment - open pit mining applications." Thesis, Curtin University, 2007. http://hdl.handle.net/20.500.11937/1812.

Full text

Abstract:

Methods for estimating productivity and costs, and dependent equipment selection process, have needed to be increasingly reliable. Estimated productivity and costs must be as accurate as possible in reflecting actual productivity and costs experienced by mining operations to accommodate the long-term trend for diminishing commodity prices, For loading and hauling equipment operating in open pit mines, some of the interrelated estimating criteria have been investigated for better understanding; and, consequently, more reliable estimates of production and costs, also more effective equipment sel

APA, Harvard, Vancouver, ISO, and other styles

9

Lehmann, Frederick Denis, University of Western Sydney, of Science Technology and Environment College, and School of Environment and Agriculture. "Weight load carry : a review of the efficiency and effectiveness of the army backpack." THESIS_CSTE_EAG_Lehmann_F.xml, 2000. http://handle.uws.edu.au:8081/1959.7/663.

Full text

Abstract:

Military load carrying has occupied the attention of military developers, researchers and commanders over centuries. The Army backpack remains the means of carriage for ammunition and rations for the soldier in the field. The traditional rationale for its use has been that the infantry soldier must be able to sustain himself in combat and live independently for days at a time without resupply. At the Royal Military College, Duntroon (RMC), the mission is to produce men and women who are capable and effective officers and soldiers. The weight of the pack with the items required at RMC is often

APA, Harvard, Vancouver, ISO, and other styles

10

Meunier, Pierre. "Psychophysical assessment of load-carrying in internal and external-frame backpacks." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-05022009-040630/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Hardy, Raymond J. "Selection criteria for loading and hauling equipment - open pit mining applications." Curtin University of Technology, Western Australian School of Mines, 2007. http://espace.library.curtin.edu.au:80/R/?func=dbin-jump-full&object_id=118304.

Full text

Abstract:

Methods for estimating productivity and costs, and dependent equipment selection process, have needed to be increasingly reliable. Estimated productivity and costs must be as accurate as possible in reflecting actual productivity and costs experienced by mining operations to accommodate the long-term trend for diminishing commodity prices, For loading and hauling equipment operating in open pit mines, some of the interrelated estimating criteria have been investigated for better understanding; and, consequently, more reliable estimates of production and costs, also more effective equipment sel

APA, Harvard, Vancouver, ISO, and other styles

12

Thuresson, Marcus. "On neck load among helicopter pilots : effects of head-worn equipment, whole-body vibration and neck position /." Stockholm, 2005. http://diss.kib.ki.se/2005/91-7140-472-4/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Ramsey, Todd R. "The Effects of Load-Positioning Material Handling Equipment on Spinal Loading During Manual Handling of Bulk Bags." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1368027435.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Zhou, Limin. "ASSESSING AND MITIGATING AIRBORNE NOISE FROM POWER GENERATION EQUIPMENT." UKnowledge, 2013. http://uknowledge.uky.edu/me_etds/22.

Full text

Abstract:

This dissertation examines the assessment and mitigation of airborne noise from power generation equipment. The first half of the dissertation investigates the diagnosis and treatment of combustion oscillations in boilers. Sound is produced by the flame and is reflected downstream from the combustion chamber. The reflected sound waves perturb the mixture flow or equivalence ratio increasing the heat release pulsations and the accompanying sound produced by the flame. A feedback loop model for determining the likelihood of and diagnosing combustion oscillations was reviewed, enhanced, and then

APA, Harvard, Vancouver, ISO, and other styles

15

Zimmerman, Nicole P. "Time-Variant Load Models of Electric Vehicle Chargers." PDXScholar, 2015. https://pdxscholar.library.pdx.edu/open_access_etds/2297.

Full text

Abstract:

In power distribution system planning, it is essential to understand the impacts that electric vehicles (EVs), and the non-linear, time-variant loading profiles associated with their charging units, may have on power distribution networks. This research presents a design methodology for the creation of both analytical and behavioral models for EV charging units within a VHDL-AMS simulation environment. Voltage and current data collected from Electric Avenue, located on the Portland State University campus, were used to create harmonic profiles of the EV charging units at the site. From these p

APA, Harvard, Vancouver, ISO, and other styles

16

Lindgren, Magnus. "Engine exhaust gas emissions from non-road mobile machinery : effects of transient load conditions /." Uppsala : Dept. of Biometry and Engineering, Swedish Univ. of Agricultural Sciences, 2004. http://epsilon.slu.se/a481.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Torén, Anna. "Twisted trunk postures during tractor driving : with special reference to low-back load and exposure /." Uppsala : Swedish Univ. of Agricultural Sciences (Sveriges lantbruksuniv.), 1999. http://epsilon.slu.se/avh/1999/91-576-5498-0.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Aurand, Alexander M. "Dynamic Moments on the Cervical Spine Imposed by Head-Mounted Equipment." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1430747355.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Trindade, Júnnia Pires de Amorim. "A Influência do tempo de armazenamento, após a limpeza, na carga microbiana de tubos de silicone utilizados na assistência a pacientes cirúrgicos." Universidade Federal de Goiás, 2016. http://repositorio.bc.ufg.br/tede/handle/tede/5960.

Full text

Abstract:

Submitted by Erika Demachki (erikademachki@gmail.com) on 2016-08-17T19:44:43Z No. of bitstreams: 2 Dissertação - Júnnia Pires de Amorim Trindade - 2016.pdf: 4029550 bytes, checksum: 8273cd9d0a5907d8dd17702921026096 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)<br>Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2016-08-18T12:56:44Z (GMT) No. of bitstreams: 2 Dissertação - Júnnia Pires de Amorim Trindade - 2016.pdf: 4029550 bytes, checksum: 8273cd9d0a5907d8dd17702921026096 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf

APA, Harvard, Vancouver, ISO, and other styles

20

Andersson, Patrik, and Morgan Wallin. "Low Loss Articulated Hauler Axle : A Conceptual Study." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-63842.

Full text

Abstract:

Volvo Construction Equipment is highly regarded for robust products, but with an increasing competition in their market, development of the product portfolio is more important than ever. One step being carried out is to reduce losses in powertrains and increase the fuel efficiency for solutions such as articulated haulers and wheel loaders. This would eventually lower the fuel costs and emissions for the end customer. With this development, Volvo CE could strengthen their position in the market while also contributing to reducing the construction industry's environmental impact. By investigati

APA, Harvard, Vancouver, ISO, and other styles

21

Šváb, Štěpán. "Diagnostika stavu malých kuličkových ložisek." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400673.

Full text

Abstract:

The aim of this thesis was to build equipment for testing bearing condition analysis during its life. The theory of bearing parameter and diagnostics methodology for their analysis are discussed. Hardware used for device design and data collection. Finally, the course of measurement and software evaluating the end of the test are discussed.

APA, Harvard, Vancouver, ISO, and other styles

22

Abrantes, Catarina Isabel Neto Gavião. "Para idêndicas frequências cardíacas, a magnitude das adaptações agudas metabólicas, cárdio-respiratórias e perceptuais é variável em função do modo de exercício." Master's thesis, Instituições portuguesas -- UP-Universidade do Porto -- -Faculdade de Ciências do Desporto e de Educação Física, 2001. http://dited.bn.pt:80/29474.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Малишко, А. В. "Формування стратегії технічного розвитку як основа створення конкурентних переваг підприємства (на прикладі «Телекарт-прилад»)". Thesis, Одеський національний економічний університет, 2020. http://dspace.oneu.edu.ua/jspui/handle/123456789/12462.

Full text

Abstract:

У роботі розглядаються теоретичні аспекти що стосуються поняття категорії конкурентна перевага. Виявлені дискусійні підходи щодо видів та чинників формування конкурентних переваг Проаналізовані характерні ознаки технічного розвитку як потужної складової формування конкурентних переваг підприємства. Проаналізовано рівень та динаміка найбільш важливих техніко-економічних показників діяльності досліджуваного підприємства, представлено ступінь забезпеченості підприємства основними засобами та рівень їх морального та фізичного стану, досліджено вплив факторів на динаміку фондовіддачі на основі вик

APA, Harvard, Vancouver, ISO, and other styles

24

Brychta, Ondřej. "Pension ve Špindlerově Mlýně - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371867.

Full text

Abstract:

THE OBJECTIVE OF THIS DIPLOMA WORK IS THE BUILDING-TECHNOLOGICAL PROJECT OF THE PENSION IN SPINDLER MILL. DIPLOMA WORK REALIZING GROWING LOWER BUILDINGS AND GROSS TOP STAYS OF THE PENSION OBJECT. DETAILS ARE DETAILED FOR THE MOST DEMANDED DESIGN OF MACHINERY, BUDGET BUDGET, TIME SCHEME, CONTROL AND TEST PLANS, BUILDING EQUIPMENT, DESIGNATION OF MOVING MECHANISM AND WIDER RELATIONSHIPS. THE DIPLOMA WORK IS PROCESSED ON THE BASIS OF THE TECHNICAL SIGNS PROVIDED BY THE PROJECTANT

APA, Harvard, Vancouver, ISO, and other styles

25

Huang, I.-Cheng. "The Christian holistic equipment in the redemption of Jesus Christ our Lord." Theological Research Exchange Network (TREN), 2000. http://www.tren.com.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Michler, Le. "Entwicklung eines Versuchsstandes zur zweiaxialen Beanspruchung von textilbewehrtem Beton." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2009. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-25129.

Full text

Abstract:

Im Rahmen der vorliegenden Arbeit wird das Versuchskonzept für zweiaxiale Zug-Zug-Versuche an textilbewehrten Betonscheiben behandelt. Diese Arbeit soll einen Beitrag leisten, die Kenntnisse aus dem Maschinenbau, der Mechanik in den Bereich der Bauingenieure und Baustoffe umzusetzen, um alle Effekte, die vom Versuchstand verursacht werden, öffentlich zu machen. Es ist ein Versuchskonzept zu erarbeiten, wie ein experimenteller Zug-Zug-Versuch optimal zu gestalten ist, um das Tragverhalten des textilbewehrten Betons genau zu ermitteln. Die Arbeit ist hauptsächlich in zwei Teile gegliedert. Der e

APA, Harvard, Vancouver, ISO, and other styles

27

Michler, Le. "Entwicklung eines Versuchsstandes zur zweiaxialen Beanspruchung von textilbewehrtem Beton." Doctoral thesis, Technische Universität Dresden, 2008. https://tud.qucosa.de/id/qucosa%3A25142.

Full text

Abstract:

Im Rahmen der vorliegenden Arbeit wird das Versuchskonzept für zweiaxiale Zug-Zug-Versuche an textilbewehrten Betonscheiben behandelt. Diese Arbeit soll einen Beitrag leisten, die Kenntnisse aus dem Maschinenbau, der Mechanik in den Bereich der Bauingenieure und Baustoffe umzusetzen, um alle Effekte, die vom Versuchstand verursacht werden, öffentlich zu machen. Es ist ein Versuchskonzept zu erarbeiten, wie ein experimenteller Zug-Zug-Versuch optimal zu gestalten ist, um das Tragverhalten des textilbewehrten Betons genau zu ermitteln. Die Arbeit ist hauptsächlich in zwei Teile gegliedert. Der e

APA, Harvard, Vancouver, ISO, and other styles

28

Hradečný, Štěpán. "Stavebně technologický projekt polyfunkčního domu, Staré Brno." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372235.

Full text

Abstract:

The diploma thesis deals with the technological stage of the lower structure, namely laying on piled foundations, including laying of a building pit with pilot reinforced concrete walls, and a rough top structure made of reinforced concrete walls, cores and reinforced concrete ceiling structure. The content is a technical report, solutions of wider transport relations, time and financial planning, studies of the main technological stages, equipment of the construction site of solved stages, design of the main building machines and mechanisms, technological regulations, control and test plans,

APA, Harvard, Vancouver, ISO, and other styles

29

Kaczyński, Marek. "Vliv změny požárně technických charakteristik na požárně bezpečnostní řešení stavby gymnázia." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226392.

Full text

Abstract:

This thesis examines how the changes of fire technical characteristics could affect the fire safety solution of gymnasium. The fire safety solution was developed for this object. The idea is to prove, that this object, which was designed in 1995, meets current requirements for fire safety of buildings. The method and principles of this solution are described in the introductory part of this thesis. For unsuitable solution was designed modification of this solution, which meets the requirements of fire safety solution of gymnasium. This modification is focused on designing new escape routes. In

APA, Harvard, Vancouver, ISO, and other styles

30

Růžička, Radek. "Příprava realizace bytového domu v Brně - Modřicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391883.

Full text

Abstract:

The diploma thesis deals with the lower and upper rough building of a apartment building. It includes a technical report, broader transport routes, a study of the implementation of the main technological stages, a technical report of the construction site equipment, the design of the main building machines and mechanisms, a plan for providing material resources for a reinforced concrete ceiling, a technological regulation for the rough bottom and top structure, work and monolithic constructions, gross building budget, risk plan and their measures, statement of the dimension and network graph f

APA, Harvard, Vancouver, ISO, and other styles

31

Balachowski, Lech. "Différents aspects de la modélisation physique du comportement des pieux : chambre d'étalonnage et centrifugeuse." Grenoble INPG, 1995. http://www.theses.fr/1995INPG0067.

Full text

Abstract:

Ce travail de recherche a ete effectue au sein du groupe geomecanique et ouvrages du laboratoire sols, solides, structures. Il concerne l'etude du comportement des pieux de grande dimension utilises comme fondations de structures en mer dans des sables denses. Cette etude a ete menee a l'aide de deux grands outils de modelisation physique: la chambre d'etalonnage du laboratoire 3s et la centrifugeuse du l. C. P. C de nantes. Les pieux installes pour des plates-formes petrolieres sont en general des pieux battus a base ouverte. Les essais de pieux realises en chambre d'etalonnage du laboratoire

APA, Harvard, Vancouver, ISO, and other styles

32

Jurigová, Karolína. "Hodnocení rizik práce s těžkými břemeny." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-414112.

Full text

Abstract:

The diploma thesis is focused on the issues of handling heavy loads using a crane. The thesis tries to identify threats in the process. Analysis of the current state evaluates the issue from the perspective of OHS not only in the Czech Republic but also in selected states of the European Union. Furthermore, the analysis discusses the obligations of employees and employers in the field of safety and clarifies the basic concepts of the issue. Based on a model example, the analyzes are performed to that identify the threats with the highest level of risk Subsequently, there are presented measures

APA, Harvard, Vancouver, ISO, and other styles

33

Рикованова, Ірина Сергіївна. "Логістика постачання виробничого обладнання на підприємство". Diss., Національний університет «Львівська політехніка», 2021. https://ena.lpnu.ua/handle/ntb/56674.

Full text

Abstract:

Дисертаційна робота присвячена обґрунтуванню теоретичних та методичних засад логістики постачання виробничого обладнання на підприємство та розробленню практичні рекомендації щодо їх реалізації. В роботі розвинута дефініція «логістика постачання», виділено класифікаційні ознаки виробничого обладнання. Удосконалено процес логістики постачання виробничого обладнання на підприємство, який враховує особливості елементів виробничого обладнання, а також визначення найбільш вигідних способів постачання. Розроблено та запропоновано базову платформу логістики постачання виробничого обладнання на підпр

APA, Harvard, Vancouver, ISO, and other styles

34

Boora, Arash Abbasalizadeh. "Flexible high-power multi DC-DC converters for train systems." Thesis, Queensland University of Technology, 2010. https://eprints.qut.edu.au/33208/1/Arash_Boora_Thesis.pdf.

Full text

Abstract:

This thesis reports on the investigations, simulations and analyses of novel power electronics topologies and control strategies. The research is financed by an Australian Research Council (ARC) Linkage (07-09) grant. Therefore, in addition to developing original research and contributing to the available knowledge of power electronics, it also contributes to the design of a DC-DC converter for specific application to the auxiliary power supply in electric trains. Specifically, in this regard, it contributes to the design of a 7.5 kW DC-DC converter for the industrial partner (Schaffler and As

APA, Harvard, Vancouver, ISO, and other styles

35

Kandaz, Murat. "Computer Aided Design And Structural Analysis Of Pressure Vessels." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607261/index.pdf.

Full text

Abstract:

This study is conducted for the design and analysis of pressure vessels and associated pressurized equipment using various codes and methods. A computer software is developed as the main outcome of this study, which provides a quick and comprehensive analysis by using various methods utilized in codes and standards together with theoretical and empirical methods which are widely accepted throughout the world. Pressure vessels are analyzed using ASME Boiler and Pressure Vessel Code, whereas auxiliary codes, especially ASCE and AISC codes are utilized for structural analyses of these equipment.

APA, Harvard, Vancouver, ISO, and other styles

36

Sviták, Marek. "Stavebně technologický projekt podnikatelského inkubátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372041.

Full text

Abstract:

The content of the diploma thesis is the processing of a constructive technological project of a business incubator. The objective of this constructive technological project is to approach the construction process in the framework of the study of the implementation of the main technological stages, which closely follows the project of the site construction equipment with suitable layout of its construction, as well as the design of suitable machinery mechanisms for realization of the main building. Part of the project is also to determine the timeliness of work, financial and material manageme

APA, Harvard, Vancouver, ISO, and other styles

37

Ковальчук, Володимир Іванович, та Volodymyr Kovalchuk. "Забезпечення надійності роботи системи електропостачання підприємства виготовлення будівельних матеріалів". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, кафедра електричної інженерії,Тернопіль, Україна, 2020. http://elartu.tntu.edu.ua/handle/lib/33190.

Full text

Abstract:

Розраховані МСЗ і захист від перевантаження генераторів із застосуванням автоматичних вимикачів серії ВА07 виробництва компанії IEK. Для захисту трансформатора були розраховані МСЗ, СВ і захист від перевантаження із застосуванням мікропроцесорного пристрою Sepam Т-20. Для захисту живлячої кабельної лінії був розрахований МСЗ на пристрої Sepam S-20, також для кабельної лінії передбачили захист від замикань на землю. Для керування автоматичним введенням резерву прийняли до встановлення 2 незалежні блоки управління БУАВР.<br>У кваліфікаційній роботі магістра здійснено розробку заходів для забезпе

APA, Harvard, Vancouver, ISO, and other styles

38

Kondáš, Ondřej. "Polyfunkční dům Brno, Černovice - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265233.

Full text

Abstract:

The aim of this master's thesis is the construction-technological project of the entire building focusing on major construction building - Multifunctional house, which is based on large-diameter piles. The main part of thesis are budget of object and time schedules of construction. Part of the thesis is organization of construction and design of the site eguipment, technological regulation of selected work, quality control and solving transport relations including oversize cargo. It also deals with the design of mechanical assemblies, health and safety, safety of environment and design of inst

APA, Harvard, Vancouver, ISO, and other styles

39

Oliveira, Yuri Calil Loures de. "Alimentação de cargas hospitalares críticas utilizando conversores estáticos." Universidade Federal de Juiz de Fora, 2016. https://repositorio.ufjf.br/jspui/handle/ufjf/1398.

Full text

Abstract:

Submitted by Renata Lopes (renatasil82@gmail.com) on 2016-05-05T18:23:07Z No. of bitstreams: 1 yuricalillouresdeoliveira.pdf: 2613361 bytes, checksum: b14d216c9e91ffe085e35724d58bc704 (MD5)<br>Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-06-07T15:42:11Z (GMT) No. of bitstreams: 1 yuricalillouresdeoliveira.pdf: 2613361 bytes, checksum: b14d216c9e91ffe085e35724d58bc704 (MD5)<br>Made available in DSpace on 2016-06-07T15:42:11Z (GMT). No. of bitstreams: 1 yuricalillouresdeoliveira.pdf: 2613361 bytes, checksum: b14d216c9e91ffe085e35724d58bc704 (MD5)

APA, Harvard, Vancouver, ISO, and other styles

40

WANG, HSIANG-HSU, and 王祥旭. "Modular application of Printed Circuit Board Unload/Load equipment." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/38498061893160265396.

Full text

Abstract:

碩士<br>中原大學<br>機械工程研究所<br>103<br>How to modularize the mechanism of PCB manufacturing equipment is investigated in this article. According to the present already built PCB equipment, an attempt is to search for the mechanism modules of common use. In reference to the various requirement of the PCB equipment from the majority of customers, matching with the assigned modules is carried out. By using the matched modular mechanisms, the unmatched mechanism is the only effort needs further design. Thus, it is instrumental and cost-effective to satisfy miscellaneous demands of the customers. In other

APA, Harvard, Vancouver, ISO, and other styles

41

Ghaffarpour, Jahromi Mohsen. "DC microgrid for mobile mining equipment." Thesis, 2017. http://hdl.handle.net/1959.13/1351338.

Full text

Abstract:

Research Doctorate - Doctor of Philosophy (PhD)<br>Electric mining excavators (rope shovels and draglines) represent a larger and the most dynamic part of the electric load at an open cut mine site. These excavators are currently undergoing an upgrade to the newly adopted high power IGBT-based AC drive technology. Such an upgrade requires that essentially every component inside an excavator is replaced by a new one. In this project an alternative upgrade solution is proposed, which is based on a transition from AC to DC form of power delivery, across the mine and to individual motors inside an

APA, Harvard, Vancouver, ISO, and other styles

42

(9593063), Li Cheng. "Laboratory Load-Based Testing, Performance Mapping and Rating of Residential Cooling Equipment." Thesis, 2020.

Find full text

Abstract:

<div>In the U.S., unitary residential air conditioners are rated using standard AHRI 210/240 that is inadequate to credit equipment with advanced controls and variable-speed components since the ratings are based on results of steady-state laboratory tests. Contrarily, a load-based testing and rating approach is presented in this work that can capture equipment performance with its integrated controls and thermostat responses that is more representative of the field. In this approach, representative building sensible and latent loads are emulated in a psychrometric test facility at different i

APA, Harvard, Vancouver, ISO, and other styles

43

Minnaar, Ulrich John. "Development of a programmable load." Thesis, 2006. http://hdl.handle.net/10539/1696.

Full text

Abstract:

Student Number : 0400486V - MSc (Eng) dissertation - School of Electrical and Information Engineering - Faculty of Engineering and the Built Environment<br>The Voltage Dip Test Facility at the University of the Witwatersrand utilises a resistive load during testing of variable speed drives. This method produces valuable results regarding the performance of drives under dip conditions. It has been shown that load type does influence the performance of drives and this variation cannot be tested under current conditions as only linear loading is attainable with resistive loads. This thesis pro

APA, Harvard, Vancouver, ISO, and other styles

44

Tseng, Yi-Yen, and 曾義嚴. "Research on the Improvement of Electricity Supply and the Load of Personal Equipment." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/gpa48d.

Full text

Abstract:

博士<br>中原大學<br>工業與系統工程研究所<br>107<br>Modern warfare is characterized by precise strikes, prompt reaction and high efficiency, for which militarily advanced countries around the world have begun to develop better equipment and weapon systems for the individual soldier. The main problem is that the more advanced the equipment and intelligent systems are, the heavier the weight of the load is, consequently decreasing the degree of mobility of the person carrying them. Thus, how to reduce the soldiers’ load while still maintaining equipment functions has become one of the major topics of interest i

APA, Harvard, Vancouver, ISO, and other styles

45

Chen, Ying-Ying, and 陳盈螢. "An FE-Based Approach for the Limit Load of Pressure Equipment with a Localized Thinning Defect." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/04688426759486760532.

Full text

Abstract:

碩士<br>國立高雄第一科技大學<br>環境與安全衛生工程研究所<br>99<br>Nowadays, the design and construction of pressure vessels often require that some sort of engineering standards or codes, such as CNS 9788 or ASME BPVC be followed. However, in these design codes, one of the key assumptions is that its thickness is uniformly distributed over the entire structure, which implies that defects due to long term effects of corrosion are not considered. In other words, the same formula that was used in the design stage is no longer applicable for assessing the fitness of equipment. API RP 579 Fitness-for-service (FFS) is pub

APA, Harvard, Vancouver, ISO, and other styles

46

Yan-HoWu and 吳彥和. "Design and Implementation of Alarm Equipment for Auxiliary System of On-Load Tap Changer of Transformers." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/33914542361552363341.

Full text

Abstract:

碩士<br>國立成功大學<br>電機工程學系碩士在職專班<br>104<br>This thesis proposes alarm equipment for auxiliary system of on-load tap changer of transformers. The proposed system is capable of filtering the abnormal signal and delivering the alarming signal. This design is motivated because the occurrence of abnormal operation of on-load tap changer often results in the abnormal increment or decrement of voltage at the secondary side of transformers. Therefore, the thesis is devoted to designing the alarm equipment for auxiliary system of on-load tap changer based on the number of times of signal changes. From the

APA, Harvard, Vancouver, ISO, and other styles

47

BENVENUTI, Paolo. "Innovative equipment and exercise modalities for anterior cruciate ligament rehabilitation." Doctoral thesis, 2014. http://hdl.handle.net/11562/715764.

Full text

Abstract:

Background. Numerosi studi dimostrano che durante gli esercizi di estensione del ginocchio in catena cinetica aperta, la tensione sul legamento crociato anteriore (LCA) può essere ridotta considerevolmente con la co-contrazione intenzionale dei muscoli femorali, così come, attraverso l’utilizzo di una leg-extension che implementi o una compressione assiale esterna sul ginocchio, o una spostamento controllato del rullo mobile lungo la parte inferiore della gamba durante l’esercizio. Obiettivi. Gli obiettivi principali di questo studio sono: 1) determinare il possibile aumento della co-attivazi

APA, Harvard, Vancouver, ISO, and other styles

48

Lehmann, Frederick Denis. "Weight load carry : a review of the efficiency and effectiveness of the army backpack." Thesis, 2000. http://handle.uws.edu.au:8081/1959.7/663.

Full text

Abstract:

Military load carrying has occupied the attention of military developers, researchers and commanders over centuries. The Army backpack remains the means of carriage for ammunition and rations for the soldier in the field. The traditional rationale for its use has been that the infantry soldier must be able to sustain himself in combat and live independently for days at a time without resupply. At the Royal Military College, Duntroon (RMC), the mission is to produce men and women who are capable and effective officers and soldiers. The weight of the pack with the items required at RMC is often

APA, Harvard, Vancouver, ISO, and other styles

49

Yu, Tsungchien, and 游聰建. "New product introduction phase with the new and old equipment load tools demand - to the panel industry case companies." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/36038773349402052051.

Full text

Abstract:

碩士<br>國立中央大學<br>工業管理研究所碩士在職專班<br>100<br>The 3D-LCD (3 dimensions-Liquid Crystal Display) was officially entered into a new era in 2010. The new products of 3D-LCD in an early phase , In order to save the plant and equipment costs , The production of 3D-LCD equipment build factories in the original production of TFT-LCD (Thin Film Transistor - Liquid Crystal Display), But the process is different, The output of the old equipment capacity has reduced by 20 percent as compared with new equipment .The influence of output on product plan are serious. This research in the direction of the bottleneck

APA, Harvard, Vancouver, ISO, and other styles

50

Chu, Min-Tan, and 朱敏丹. "Semiconductor equipment of discussion on product performance model (300mm Load Port Purge SubSystem Retrofit Proposal) – A Case Study on One Company." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/3yz8ya.

Full text

Abstract:

碩士<br>國立中央大學<br>工業管理研究所在職專班<br>107<br>We provide total solution to retrofit the current 300mm load ports and enables them to have automated purge function. The retrofit plan proposes achievable mechanical and controlling schemes which requires minimum modification to the existing host equipment and load ports, meanwhile, keeps the functions flexible and expandable.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!