Relevant bibliographies by topics / ESEM-EDX

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'ESEM-EDX'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'ESEM-EDX.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "ESEM-EDX"

1

WANG, S., L. BAXTER, and F. FONSECA. "Biomass fly ash in concrete: SEM, EDX and ESEM analysis." Fuel 87, no. 3 (2008): 372–79. http://dx.doi.org/10.1016/j.fuel.2007.05.024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Souto, Jorge, Javier Pinto, Ángel Carmelo Prieto, Mercedes Barrera, Manuel Carlos Jiménez, and Alma Salinas. "Archaeometric Study of Pictorial Stratigraphies from a Togatus Roman Sculpture found in Salamanca (Spain)." Zephyrvs 88 (January 27, 2022): 193–207. http://dx.doi.org/10.14201/zephyrus202188193207.

Full text
Abstract:
The decoration of a togatus Roman sculpture found in Salamanca in 2015 has been examined to identify the applied pigments. The study was performed using environmental scanning electron microscopy –ESEM– with an energy-dispersive X-ray analyser –ESEM-EDX– and Raman spectroscopy –RS– in microscopic mode. The ESEM-EDX analyser allowed the elemental chemical composition of the samples to be established, the concentration and distribution of each element in areas and cross-sections to be determined, and predefined concentration profiles in the pictorial stratum to be obtained. The ionic or molecula
APA, Harvard, Vancouver, ISO, and other styles
3

Xue, Qing-feng, and Sheng-gao Lu. "Microstructure of ferrospheres in fly ashes: SEM, EDX and ESEM analysis." Journal of Zhejiang University-SCIENCE A 9, no. 11 (2008): 1595–600. http://dx.doi.org/10.1631/jzus.a0820051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rumberger, Michael D., Peter Lentzsch, Babette Münzenberger, and Reinhard F. Hüttl. "Nutrient amounts of ectomycorrhizae analysed by EDX using ESEM and ICP." Mycorrhiza 15, no. 4 (2005): 307–12. http://dx.doi.org/10.1007/s00572-005-0350-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Spinelli, Andrea, Fausto Zamparini, Alessio Buonavoglia, Paolo Pisi, Maria Giovanna Gandolfi, and Carlo Prati. "Reciprocating System for Secondary Root Canal Treatment of Oval Canals: CBCT, X-rays for Remnant Detection and Their Identification with ESEM and EDX." Applied Sciences 12, no. 22 (2022): 11671. http://dx.doi.org/10.3390/app122211671.

Full text
Abstract:
Aim of the study: to evaluate root filling remnants after secondary root canal treatments (SRCTs) of oval-shaped canals with X-rays and cone beam computed tomography (CBCT). The SRCTs were performed using reciprocating NiTi instruments. Methods: Single-rooted teeth (N = 64) were randomly treated with Reciproc Blue (RB) and filled with AH Plus/single cone (SC group) or AH Plus/Guttafusion (GF group). After seven days of storage in HBSS (Hanks balanced salt solution), Gates Glidden burs #2/3 and RB #25 and #40 were used for the SRCTs. The time to complete the procedure was measured. X-rays and C
APA, Harvard, Vancouver, ISO, and other styles
6

Prati, Carlo, Fausto Zamparini, Daniele Botticelli, et al. "The Use of ESEM-EDX as an Innovative Tool to Analyze the Mineral Structure of Peri-Implant Human Bone." Materials 13, no. 7 (2020): 1671. http://dx.doi.org/10.3390/ma13071671.

Full text
Abstract:
This study aimed to investigate the mineralization and chemical composition of the bone–implant interface and peri-implant tissues on human histological samples using an environmental scanning electron microscope as well as energy-dispersive x-ray spectroscopy (ESEM-EDX) as an innovative method. Eight unloaded implants with marginal bone tissue were retrieved after four months from eight patients and were histologically processed and analyzed. Histological samples were observed under optical microscopy (OM) to identify the microarchitecture of the sample and bone morphology. Then, all samples
APA, Harvard, Vancouver, ISO, and other styles
7

Romanos, Georgios, Fausto Zamparini, Andrea Spinelli, Carlo Prati, and Maria Gandolfi. "ESEM-EDX Microanalysis at Bone-Implant Region on Immediately Loaded Implants Retrieved Postmortem." International Journal of Oral & Maxillofacial Implants 37, no. 3 (2022): e51-e60. http://dx.doi.org/10.11607/jomi.9228.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Iordanidis, Andreas, Jim Buckman, Athanasios G. Triantafyllou, and Argyro Asvesta. "ESEM–EDX characterisation of airborne particles from an industrialised area of northern Greece." Environmental Geochemistry and Health 30, no. 5 (2007): 391–405. http://dx.doi.org/10.1007/s10653-007-9124-y.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Prati, Carlo, Fausto Zamparini, Andrea Spinelli, Gian Andrea Pelliccioni, Chiara Pirani, and Maria Giovanna Gandolfi. "Secondary Root Canal Treatment with Reciproc Blue and K-File: Radiographic and ESEM-EDX Analysis of Dentin and Root Canal Filling Remnants." Journal of Clinical Medicine 9, no. 6 (2020): 1902. http://dx.doi.org/10.3390/jcm9061902.

Full text
Abstract:
Secondary root canal treatment requires the complete removal of filling materials with different chemical-physical properties. A newly developed single-use NiTi instrument (Reciproc Blue, RB) may be more effective in root canal retreatment. The aim of the present study was to evaluate morphology and composition of remnants after retreatment with RB compared to traditional K-File technique, in canals obturated with Thermafil/AH Plus. Twenty-four single-rooted human teeth were shaped with NiTi obturated with AH-Plus/Thermafil and retreated using RB NiTi instruments or manual K-Files. Radiographs
APA, Harvard, Vancouver, ISO, and other styles
10

Nygren, Håkan, Per Malmberg, and Yang Liu. "MgO Implanted in Rat Tibia Bone Marrow is Osteoinductive through the Formation of a Matrix, Containing Hydroxyapatite." Materials Science Forum 879 (November 2016): 1404–7. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1404.

Full text
Abstract:
Healing of rat tibia after intramedullary implantation of MgO was analysed by Environmental Scanning Electron Microscopy (ESEM) and Energy-Dispersive X-ray spectroscopy (EDX). The results indicated the formation of hydroxyl-apatite (HA) in the entire intramedullary space after 1 week of healing. Then, corroded Mg, MgO and MgCO3 were incubated with DMEM in vitro for 24 h and the surface of the material was analysed by EDX and Time-of-Flight Secondary Ion Mass (ToF-SIMS). The chemical analysis of the Mg corrosion products indicate that HA is formed at the material surface and that MgCO3 was an e
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "ESEM-EDX"

1

Goodall, Rosemary Anne. "Spectroscopic studies of Maya pigments." Thesis, Queensland University of Technology, 2007. https://eprints.qut.edu.au/16958/1/Rosemary_Goodall_Thesis.pdf.

Full text
Abstract:
The Maya of Central America developed a complex society: among their many achievements they developed a writing system, complex calendar and were prolific builders. The buildings of their large urban centres, such as Copan in Honduras, were decorated with painted stucco, moulded masks, carving and elaborate murals, using a range of coloured pigments. In this study the paints used on the buildings of Copan and some ceramic sherds have been investigated, non-destructively, using micro-Raman spectroscopy, micro-ATR infrared spectroscopy, environmental scanning electron microscopy with energy di
APA, Harvard, Vancouver, ISO, and other styles
2

Goodall, Rosemary Anne. "Spectroscopic studies of Maya pigments." Queensland University of Technology, 2007. http://eprints.qut.edu.au/16958/.

Full text
Abstract:
The Maya of Central America developed a complex society: among their many achievements they developed a writing system, complex calendar and were prolific builders. The buildings of their large urban centres, such as Copan in Honduras, were decorated with painted stucco, moulded masks, carving and elaborate murals, using a range of coloured pigments. In this study the paints used on the buildings of Copan and some ceramic sherds have been investigated, non-destructively, using micro-Raman spectroscopy, micro-ATR infrared spectroscopy, environmental scanning electron microscopy with energy di
APA, Harvard, Vancouver, ISO, and other styles
3

Moon, Seong-Gi. "Chemical and Physical Properties of Atmospheric Aerosols (a) A Case Study in the Unique Properties of Agricultural Aerosols (b) The Role of Chemical Composition in Ice Nucleation during the Arctic Spring." Thesis, 2010. http://hdl.handle.net/1969.1/ETD-TAMU-2010-05-7814.

Full text
Abstract:
This study focuses on the analysis of atmospheric particles sampled from two different field campaigns: the field study at a cattle feeding facility in the summer from 2005 to 2008 and the Indirect and Semi-Direct Aerosol Campaign (ISDAC) in 2008. A ground site field study at a representative large cattle feeding facility in the Texas Panhandle was conducted to characterize the particle size distributions, hygroscopicity, and chemical composition of agricultural aerosols. Here, a first comprehensive dataset is reported for these physical and chemical properties of agricultural aerosols appropr
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "ESEM-EDX"

1

Islam, Omar, Clive R. Siviour, and Kalin I. Dragnevski. "An ESEM/EDX Methodology for the Study of Additive Adsorption at the Polymer-Air Interface." In Springer Proceedings in Physics. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-16919-4_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Marey Mahmoud, Hussein. "Painting on Fibers." In Preservation and Restoration Techniques for Ancient Egyptian Textiles. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-4811-0.ch004.

Full text
Abstract:
In ancient Egypt, color expressed both symbolic and aesthetic value. For decorating purposes, the ancient Egyptians used an intensive chromatic palette based on a broad source of natural and artificial origins. Beside dyeing, decorating textiles in ancient Egypt had different forms, such as embroidery or the painting of a smooth coating applied on the textile matrix. Physical analytical approaches are an essential request prior any restoration project. In this chapter, the benefits of a wide range of non- or micro-destructive methods to study the physiochemical behavior of pigments used in ancient Egyptian painted textiles are presented. To garner data concerning the ancient materials, special techniques are used, such as the environmental scanning electron microscopy with energy dispersive X-ray spectroscopy (ESEM-EDX), X-ray fluorescence (XRF), laser-induced breakdown spectroscopy (LIBS), micro-Raman spectroscopy (µ-Raman), Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR), colorimetry, and visible reflectance spectroscopy (vis-RS).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "ESEM-EDX"

1

Mukherjee, Subhasis, Abhijit Dasgupta, Julie Silk, and Lay-ling Ong. "Inhibiting the Re-Deposition of AuSn4 on Au/Ni Metallization Pads by Varying the Accessibility of Cu in Isothermally Aged SAC305 Solder Joints." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-66803.

Full text
Abstract:
Electroplated Ni/Au over Cu is a popular metallization for printed circuit board (PCB) finish as well as for component leads, especially for wire-bondable high frequency packages, where the gold thickness (≥ 20 μinches) requirement is high for wire bonding. Redeposition of bulk AuSn4 intermetallic compound (IMC) at Au/Ni contact pads of isothermally conditioned SnAgCu (SAC) solder joints is a critical reliability concern in these packages because the interfacial layer between redeposited AuSn4 IMC and initially formed IMC during reflow at the contact pad after reflow is brittle in nature. Rede
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'ESEM-EDX' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography