Log in

Relevant bibliographies by topics / Evaluation of control loops

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Evaluation of control loops'

Author: Grafiati

Published: 4 June 2021

Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Evaluation of control loops.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Evaluation of control loops"

1

Alagoz, Baris Baykant, Aleksei Tepljakov, Eduard Petlenkov, and Celaleddin Yeroglu. "Multi-Loop Model Reference Proportional Integral Derivative Controls: Design and Performance Evaluations." Algorithms 13, no. 2 (2020): 38. http://dx.doi.org/10.3390/a13020038.

Full text

Abstract:

Due to unpredictable and fluctuating conditions in real-world control system applications, disturbance rejection is a substantial factor in robust control performance. The inherent disturbance rejection capacity of classical closed loop control systems is limited, and an increase in disturbance rejection performance of single-loop control systems affects the set-point control performance. Multi-loop control structures, which involve model reference control loops, can enhance the inherent disturbance rejection capacity of classical control loops without degrading set-point control performance;

APA, Harvard, Vancouver, ISO, and other styles

2

Mossa, Mahmoud A., Hamdi Echeikh, Ziad M. Ali, Mahrous Ahmed, Saad F. Al-Gahtani, and Hamdy M. Sultan. "Design and Modeling of a Robust Sensorless Control System for a Linear Permanent Magnet Synchronous Motor." Electronics 10, no. 8 (2021): 966. http://dx.doi.org/10.3390/electronics10080966.

Full text

Abstract:

The paper is concerned with designing an effective controller for a linear tubular homopolar (LT-H) motor type. The construction and operation of the LT-H motor are first described in detail. Then, the motor model is represented in the direct-quadrature (d-q) axes in order to facilitate the design of the control loops. The designed control system consists of two main loops: the current control loop and velocity adaptation loop. The determination of the regulator’s gains is accomplished through deriving and analyzing the transfer functions of the loops. To enhance the system’s robustness, a rob

APA, Harvard, Vancouver, ISO, and other styles

3

Drevetskyi, Volodymyr, Ivan Kovela, and Vitalii Kutia. "A METHOD OF COMPARATIVE EVALUATION OF CONTROL SYSTEMS BY THE SET OF PERFORMANCE MEASURES." Informatics Control Measurement in Economy and Environment Protection 7, no. 3 (2017): 8–10. http://dx.doi.org/10.5604/01.3001.0010.5205.

Full text

Abstract:

It was proposed a method of comparative estimation of process control loops based on a complex of direct and indirect performance measurers taking into account stability margins. It was presented a comparison algorithm for complex performance parameter considering the influence of stability margins of a control loop on its properties. Features of the method of comparative estimation of process control systems performance have been considered as an example for the closed loop feedback control system with PI controller (4 variations) and the second order plus transport delay plant.

APA, Harvard, Vancouver, ISO, and other styles

4

Sen, A. K. "Quantitative analysis of metabolic regulation. A graph-theoretic approach using spanning trees." Biochemical Journal 275, no. 1 (1991): 253–58. http://dx.doi.org/10.1042/bj2750253.

Full text

Abstract:

A graph-theoretic technique using spanning trees is described for the evaluation of Flux Control Coefficients of metabolic pathways. The technique is illustrated by investigating a linear pathway (a) in the absence of feedback and feedforward regulation. (b) with its first enzyme inhibited by the end product and (c) with multiple feedback loops. It is shown that the Flux Control Coefficients of a linear pathway with one or more feedback loops can be derived in a systematic manner by superimposing the effect of the feedback loop(s) on the expressions pertaining to the Flux Control Coefficients

APA, Harvard, Vancouver, ISO, and other styles

5

Cortés, Iñigo, Johannes Rossouw van der Merwe, Jari Nurmi, Alexander Rügamer, and Wolfgang Felber. "Evaluation of Adaptive Loop-Bandwidth Tracking Techniques in GNSS Receivers." Sensors 21, no. 2 (2021): 502. http://dx.doi.org/10.3390/s21020502.

Full text

Abstract:

Global navigation satellite system (GNSS) receivers use tracking loops to lock onto GNSS signals. Fixed loop settings limit the tracking performance against noise, receiver dynamics, and the current scenario. Adaptive tracking loops adjust these settings to achieve optimal performance for a given scenario. This paper evaluates the performance and complexity of state-of-the-art adaptive scalar tracking techniques used in modern digital GNSS receivers. Ideally, a tracking channel should be adjusted to both noisy and dynamic environments for optimal performance, defined by tracking precision and

APA, Harvard, Vancouver, ISO, and other styles

6

Boulvin, M., C. Renotte, A. Vande Wouwer, M. Remy, S. Tarasiewicz, and P. César. "Modelling, Simulation and Evaluation of Control Loops for a Cement Grinding Process." European Journal of Control 5, no. 1 (1999): 10–18. http://dx.doi.org/10.1016/s0947-3580(99)70133-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ji, Xiaoming, and Zihui Cai. "Disturbance Rejection Trajectory Tracking Control for an Unmanned Quadrotor Based on Hybrid Controllers." Journal of Robotics 2021 (July 9, 2021): 1–12. http://dx.doi.org/10.1155/2021/5216472.

Full text

Abstract:

The purpose of this article is to explore a dual-loop problem regarding the trajectory tracking control of a quadrotor unmanned aerial vehicle, applying a linear active disturbance rejection and conditional integrator sliding mode controller, namely, LARC-CISMC. The quadrotor system model is derived through Newton–Euler method and consists of two subsystems. The hybrid controller for position and attitude loops is constructed. An evaluation of the proposed controller is presented in comparison with the linear active disturbance rejection controller. Simulation comparisons and experimental test

APA, Harvard, Vancouver, ISO, and other styles

8

Liou, Luen-Woei, and Asok Ray. "A Stochastic Regulator for Integrated Communication and Control Systems: Part I—Formulation of Control Law." Journal of Dynamic Systems, Measurement, and Control 113, no. 4 (1991): 604–11. http://dx.doi.org/10.1115/1.2896464.

Full text

Abstract:

Integrated Communication and Control Systems (ICCS), recently introduced and analyzed in a series of papers [1–7], are applicable to complex dynamical processes like advanced aircraft, spacecraft, automotive, and manufacturing processes. Time-division-multiplexed computer networks are employed in ICCS for exchange of information between spatially distributed plant components as well as for coordination of the diverse control and decision-making functions. Unfortunately, an ICCS network introduces randomly varying, distributed delays within the feedback loops in addition to the digital sampling

APA, Harvard, Vancouver, ISO, and other styles

9

Xu, Dong, Yuanlin Zhang, Hongjie Fan, and Cai Meng. "High-Efficiency Closed-Loop Control of a Robotic Fish via Virtual Musculoskeletal Methodology." Applied Sciences 11, no. 18 (2021): 8602. http://dx.doi.org/10.3390/app11188602.

Full text

Abstract:

Improving propulsion efficiency holds the promise of enabling the robotic fish to work for a long time with a limited battery in its small body. In this paper, for the swimming of a bionic robotic fish, we present a virtual musculoskeletal control method from the bionic model of the joint driven by agonist muscle and antagonist muscle. A closed-loop method composed of two loops is proposed as a rule of thumb for the speed control of the robotic fish. The outer loop adjusts the swimming speed using the speed deviation; the inner loop regulates the stiffness according to the virtual muscle spind

APA, Harvard, Vancouver, ISO, and other styles

10

Murmu, Rajendra, and Arvind Kumar Singh. "Performance evaluation of PI and PI-fuzzy logic controller FPGA based permanent magnet synchronous motor drive." International Journal of Engineering & Technology 9, no. 2 (2020): 410. http://dx.doi.org/10.14419/ijet.v9i2.30471.

Full text

Abstract:

This paper depicts an experimental validation and simulation for speed control under load and no load conditions. It delineates the detail study of a closed loop vector controlled permanent magnet synchronous motor drive. This system consists of two loops for smooth speed tracking as well as reduced torque undulation. PMSM drives facilitate better dynamic responses during both steady state and dynamic conditions by monitoring the component of torque current. The resistive loads are varied and resultant speed and torque are studied. Experimental work has been performed on PMSM drives under diff

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Evaluation of control loops"

1

Skillsäter, Calle. "Evaluation and Configuration of a Control Loop Asset Monitoring Tool." Thesis, Linköpings universitet, Reglerteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-67855.

Full text

Abstract:

In this thesis, an automatic control performance monitoring tool is analyzed and evaluated. The tool is called Control Loop Asset Monitor (CLAM) and is a part of the Asset Optimization extension to the ABB platform System 800xA. CLAM calculates and combines a number of performance indices into diagnoses. The functionality, choice of configuration parameters and the quality of the result from CLAM have been analyzed using data from the pulp mill Södra Cell Mörrum. In order to get reliable diagnoses from CLAM, it is important that it is correctly configured. It was found that some of the default

APA, Harvard, Vancouver, ISO, and other styles

2

Bunn, Jason Chrisotopher. "Evaluation of assembly simulators used in closed loop attitude control system testing." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/47403.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Farenzena, Marcelo. "Novel methodologies for assessment and diagnostics in control loop management." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2008. http://hdl.handle.net/10183/13943.

Full text

Abstract:

Na literatura há vários trabalhos elucidando a importância de ferramentas para auditar malhas de controle. Na indústria, o interesse por esse tipo de software é crescente, devido ao benefício trazido: garantir o exato desempenho para cada controlador significa atingir pontos de operação mais lucrativos. Todavia, as metodologias disponíveis na literatura e nas ferramentas comerciais não provêm medidas conclusivas das características da malha. Conseqüentemente, a análise muitas vezes é confusa e difícil, acarretando um diagnóstico difícil. Reduzir a distância entre a auditoria e o diagnóstico, p

APA, Harvard, Vancouver, ISO, and other styles

4

Roslund, Anton. "Evaluation of Automated Test Generation for Simulink : A Case Study in the Context of Propulsion Control Software." Thesis, Mälardalens högskola, Akademin för innovation, design och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-48426.

Full text

Abstract:

Automated Test Generation (ATG) has been successfully applied in many domains. For the modeling and simulation language Simulink, there has been research on developing tools for ATG with promising results. However, most tools developed as part of academic research and are not publicly available, or severely limited in their ability to be integrated into an industrial workflow. There are commercial ATG tools for Simulink, with Simulink Design Verifier (SLDV) as the de-facto standard tool. For this thesis, we perform an empirical comparison of manual tests to those generated by SLDV. For the com

APA, Harvard, Vancouver, ISO, and other styles

5

Horch, Alexander. "Condition Monitoring of Control Loops." Doctoral thesis, Stockholm : Tekniska högsk, 2000. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ro, Kyoungsoo. "Two-Loop Controller for Maximizing Performance of a Grid-Connected Photovoltaic-Fuel Cell Hybrid Power Plant." Diss., Virginia Tech, 1997. http://hdl.handle.net/10919/30378.

Full text

Abstract:

The study started with the requirement that a photovoltaic (PV) power source should be integrated with other supplementary power sources whether it operates in a stand-alone or grid-connected mode. First, fuel cells for a backup of varying PV power were compared in detail with batteries and were found to have more operational benefits. Next, maximizing performance of a grid-connected PV-fuel cell hybrid system by use of a two-loop controller was discussed. One loop is a neural network controller for maximum power point tracking, which extracts maximum available solar power from PV arrays under

APA, Harvard, Vancouver, ISO, and other styles

7

Pinto, Jan Erik Mont Gomery. "Aplica??o pr?tica do m?todo de sintonia de controladores PID utilizando o m?todo do rel? com histerese." Universidade Federal do Rio Grande do Norte, 2014. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15507.

Full text

Abstract:

Made available in DSpace on 2014-12-17T14:56:19Z (GMT). No. of bitstreams: 1 JanEMGP_DISSERT.pdf: 3028317 bytes, checksum: 5eeb8ec6954b59f2853f263ffa4c4d9c (MD5) Previous issue date: 2014-05-16<br>Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico<br>The area of research and development involving the PID tune of controllers is an active area in the academic and industrial sectors yet. All this due to the wide use of PID controllers in the industry (96% of all controllers in the industry is still PID). Controllers well tuned and tools to monitor their performance over time with the

APA, Harvard, Vancouver, ISO, and other styles

8

Terlemez, Bortecene. "Oscillation Control in CMOS Phase-Locked Loops." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4841.

Full text

Abstract:

Recent advances in voltage-controlled oscillator (VCO) design and the trend of CMOS processing indicate that the oscillator control is quickly becoming one of the forefront problems in high-frequency and low-phase-noise phase-locked loop (PLL) design. This control centric study explores the limitations and challenges in high-performance analog charge-pump PLLs when they are extended to multiple gigahertz applications. Several problems with performance enhancement and precise oscillator control using analog circuits in low-voltage submicron CMOS processes, coupled with the fact that analo

APA, Harvard, Vancouver, ISO, and other styles

9

Berndtsson, Magnus. "Fault detection in lambda-tuned control loops." Licentiate thesis, Luleå : Luleå University of Technology, 2006. http://epubl.ltu.se/1402-1757/2006/47/LTU-LIC-0647-SE.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ko, Byung-su. "On performance assessment of feedback control loops /." Digital version accessible at:, 2000. http://wwwlib.umi.com/cr/utexas/main.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Evaluation of control loops"

1

Murphy, Patrick C. Closed-loop system identification experience for flight control law and flying qualities evaluation of a high performance fighter aircraft. National Aeronautics and Space Administration, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

C, Murphy Patrick. Closed-loop system identification experience for flight control law and flying qualities evaluation of a high performance fighter aircraft. National Aeronautics and Space Administration, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

C, Murphy Patrick. Closed-loop system identification experience for flight control law and flying qualities evaluation of a high performance fighter aircraft. National Aeronautics and Space Administration, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Huang, Biao, and Sirish L. Shah. Performance Assessment of Control Loops. Springer London, 1999. http://dx.doi.org/10.1007/978-1-4471-0415-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Shinskey, F. Greg. Simulating process control loops using BASIC. Instrument Society of America, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shinskey, F. Greg. Simulating process control loops using BASIC. Instrument Society of America, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Huang, Biao. Performance Assessment of Control Loops: Theory and Applications. Springer London, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Analog automatic control loops in radar and EW. Artech House, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Jelali, Mohieddine, and Biao Huang, eds. Detection and Diagnosis of Stiction in Control Loops. Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-775-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Christensen, Derald. Evaluation of induction loop installation procedures in flexible pavements. Washington State Dept. of Transportation, Planning, Research and Public Transportation Division in cooperation with United States Dept. of Transportation, Federal Highway Administration, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Evaluation of control loops"

1

Rokhlin, S. I., A. C. Guu, and K. Cho. "Closed-Loop Radiographic Process Control of ARC Welding." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0817-1_276.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Benes, Peter, and Ivo Bukovsky. "An Input to State Stability Approach for Evaluation of Nonlinear Control Loops with Linear Plant Model." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91192-2_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Buxbaum, Arne, Klaus Schierau, Alan Straughen, and R. Bonert. "Closed Control Loops." In Design of Control Systems for DC Drives. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-84006-7_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Luan, Zhen-Hua, Zong-Wei Yang, Peng Liu, and Jun Liang. "Development and Application of Closed-Loop Control Performance Evaluation System for Nuclear Power Plant." In Lecture Notes in Electrical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1876-8_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jungck, Peder, Ralph Duncan, and Dwight Mulcahy. "Loops and Flow Control." In packetC Programming. Apress, 2011. http://dx.doi.org/10.1007/978-1-4302-4159-1_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Platzer, André. "Control Loops & Invariants." In Logical Foundations of Cyber-Physical Systems. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-63588-0_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Yodaiken, Victor, Matt Sherer, and Edgar Hilton. "Control Loops in RTLinux." In Handbook of Networked and Embedded Control Systems. Birkhäuser Boston, 2005. http://dx.doi.org/10.1007/0-8176-4404-0_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Jones, Robin, and Ian Stewart. "Loops and Control Constructs." In The Art of C Programming. Springer US, 1987. http://dx.doi.org/10.1007/978-1-4613-8685-8_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Papadopoulos, Konstantinos G. "Type-I Control Loops." In PID Controller Tuning Using the Magnitude Optimum Criterion. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07263-0_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Papadopoulos, Konstantinos G. "Type-II Control Loops." In PID Controller Tuning Using the Magnitude Optimum Criterion. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07263-0_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Evaluation of control loops"

1

Boulvin, M., C. Renotte, A. Vande Wouwer, M. Remy, S. Tarasiewicz, and P. Cesar. "Modeling, simulation and evaluation of control loops for a cement grinding process." In 1997 European Control Conference (ECC). IEEE, 1997. http://dx.doi.org/10.23919/ecc.1997.7082285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wiora, Jozef, and Alicja Wiora. "Measurement Uncertainty Evaluation of Results Provided by Transducers Working in Control Loops." In 2018 23rd International Conference on Methods & Models in Automation & Robotics (MMAR). IEEE, 2018. http://dx.doi.org/10.1109/mmar.2018.8486028.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Guillermo Ramirez, A., M. Anibal Valenzuela, Steve Pittman, and Robert D. Lorenz. "Modeling and Evaluation of Paper Machine Coater Sections - Part 2: 2-Coater Section and Control Loops Bandwidths." In 2018 IEEE IAS Pulp, Paper and Forest Industries Conference (PPFIC). IEEE, 2018. http://dx.doi.org/10.1109/ppic.2018.8502188.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Skarda, Radek, Martin Cech, and Milos Schlegel. "Minimally invasive control loop performance evaluation." In 2014 IEEE Conference on Control Applications (CCA). IEEE, 2014. http://dx.doi.org/10.1109/cca.2014.6981390.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Haghighi, Payam, Prashant Mohan, Jami J. Shah, and Joseph K. Davidson. "Automatic Detection and Extraction of Tolerance Stacks in Mechanical Assemblies." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-35315.

Full text

Abstract:

Tolerances are specified by a designer to allow reasonable freedom by a manufacturer for imperfections and inherent variability without compromising performance. It takes knowledge and experience to create a good tolerance scheme. It is a tedious process driven by the type of parts, their features and controls needed for each one of them. In this paper, we investigate the extent to which GD&T schema development can be automated. Automated tolerance schema generation, requires identifying critical tolerance loops. The tolerance loop is a loop of dimensions between faces of features governin

APA, Harvard, Vancouver, ISO, and other styles

6

Gisby, Todd A., Benjamin M. O'Brien, Sheng Q. Xie, Emilio P. Calius, and Iain A. Anderson. "Closed loop control of dielectric elastomer actuators." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Yoseph Bar-Cohen and Federico Carpi. SPIE, 2011. http://dx.doi.org/10.1117/12.880711.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Low, Chang Boon. "Implementation and experimental evaluation of flexible formation tracking controllers for car-like mobile robots with velocity and steering controllers in the loops." In 2017 IEEE Conference on Control Technology and Applications (CCTA). IEEE, 2017. http://dx.doi.org/10.1109/ccta.2017.8062717.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Dong, Roy, and Xiaobo Tan. "Open-loop control of IPMC actuators under varying temperatures." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Yoseph Bar-Cohen and Federico Carpi. SPIE, 2011. http://dx.doi.org/10.1117/12.881864.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mead, B., S. Ruiz, and W. Yim. "Closed-loop control of a tube-type cylindrical IPMC." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Yoseph Bar-Cohen. SPIE, 2013. http://dx.doi.org/10.1117/12.2009395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fukuda, Shuichi, and Ping-Yu Jiang. "An Infrastructure to Support Closed Loop Product Development Practice Coupled With Rapid Prototyping." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/eim-5685.

Full text

Abstract:

Abstract This paper deals with a methodology to use rapid prototyping and tooling to aid the product development practice. Under the support of the distributive activity scheduling mechanism and the unified product data model, a closed loop is described, which consists of design-phase-oriented requirement analysis of RP/RT applications, multi-criterion decision-making mechanism for selecting the combination of materials, RP method, and RP process chain, process planning for rapid prototyping and tooling, data collections from RP manufacturing, design evaluations based on manufactured prototype

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Evaluation of control loops"

1

Cottingham J. G. The design of voltage control feedback loops for multi-phase rectifier systems. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/1150443.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Crisp, J. Temperature control feedback loops for the linac upgrade side coupled cavities at Fermilab. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6374155.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hasanul Basher, A. M. A short report on voltage-to-frequency conversion for HISTRAP RF system tuning control loops. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/10106000.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hasanul Basher, A. M. A short report on voltage-to-frequency conversion for HISTRAP RF system tuning control loops. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/6166951.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

DOE. REPOSITORY GROUND CONTROL EVALUATION. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/778902.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Williams, M. Evaluation of profile control. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/7120870.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mestha, L. K., C. M. Kwan, and K. S. Yeung. Interaction between beam control and rf feedback loops for high Q cavities an heavy beam loading. Revision A. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/67464.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Long, Robert Michael. Evaluation of TCP congestion control algorithms. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/918389.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sharon Sjostrom. Evaluation of Sorbent Injection for Mercury Control. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/902845.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sharon Sjostrom. Evaluation of Sorbent Injection for Mercury Control. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/903181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!