Books on the topic 'Evaluation parameter'

Hoff, J. C. Initial evaluation of the modified stepwise regression procedure to estimate aircraft stability and control parameters from flight test data. Cranfield University, College of Aeronautics, 1993.

B, Gilyard Glenn, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Subsonic flight test evaluation of a propulsion system parameter estimation process for the F-10 engine. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1992.

Groschen, G. E. Evaluation of measurements collected with multi-parameter continuous water-quality monitors in selected Illinois streams, 2001-03. U.S. Geological Survey, 2005.

1941-, Rogers V. C., Holt Rodger B, and National Risk Management Research Laboratory (U.S.), eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project -- Florida radon research program: Project summary. U.S. Environmental Protection Agency, National Risk Management Research Laboratory, 1995.

1941-, Rogers V. C., Holt Rodger B, and National Risk Management Research Laboratory (U.S.), eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project -- Florida radon research program: Project summary. U.S. Environmental Protection Agency, National Risk Management Research Laboratory, 1995.

1941-, Rogers V. C., Holt Rodger B, and National Risk Management Research Laboratory (U.S.), eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project -- Florida radon research program: Project summary. U.S. Environmental Protection Agency, National Risk Management Research Laboratory, 1995.

1941-, Rogers V. C., Holt Rodger B, and National Risk Management Research Laboratory (U.S.), eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project -- Florida radon research program: Project summary. U.S. Environmental Protection Agency, National Risk Management Research Laboratory, 1995.

B, Holt Rodger, Rogers V. C. 1941-, Center for Environmental Research Information (U.S.), and Air and Energy Engineering Research Laboratory., eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project, Florida Radon Research Program: Final report. U.S. Environmental Protection Agency, Office of Research and Development, Center for Environmental Research Information, 1995.

B, Holt Rodger, Rogers V. C. 1941-, Center for Environmental Research Information (U.S.), and Air and Energy Engineering Research Laboratory, eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project, Florida Radon Research Program: Final report. U.S. Environmental Protection Agency, Office of Research and Development, Center for Environmental Research Information, 1995.

B, Holt Rodger, Rogers V. C. 1941-, Center for Environmental Research Information (U.S.), and Air and Energy Engineering Research Laboratory., eds. Lumped-parameter model analyses of data from the 1992 new house evaluation project, Florida Radon Research Program: Final report. U.S. Environmental Protection Agency, Office of Research and Development, Center for Environmental Research Information, 1995.

G, Natke H., Tomlinson Geoffrey R, Yao James Tsu-ping 1932-, and International Workshop on Safety Evaluation Based On Identification Approaches Related to Time-Variant and Nonlinear Structures (1992 : Lambrecht, Germany), eds. Safety evaluation based on system identification approaches related to time-variant and nonlinear structures. F. Vieweg, 1993.

Workshop on Structural Safety Evaluation Based on System Identification Approaches (1987 Lambrecht, Germany). Structural safety evaluation based on system identification approaches: Proceedings of the workshop at Lambrecht/Pfalz. F. Vieweg, 1988.

(Pakistan), Bankers Equity Limited, ed. National economic parameters. Bankers Equity, 1987.

Sjarief, I. S. Ismail. Evaluation of reliability parameters of distribution systems. UMIST, 1994.

Timko, Robert J. Evaluating ventilation parameters of three coal mine gobs. U.S. Dept. of the Interior, Bureau of Mines, 1986.

Beitelman, A. Evaluation of surface preparation and application parameters for arc-sprayed metal coatings. US Army Corps of Engineers, Construction Engineering Research Laboratory, 1999.

J, Georgiadis Nicholas, and NASA Glenn Research Center, eds. An evaluation of parameters influencing jet mixing using the WIND Navier-Stokes Code. National Aeronautics and Space Administration, Glenn Research Center, 2002.

Dembowski, Mary Ann. An evaluation of parameters influencing jet mixing using the WIND Navier-Stokes Code. National Aeronautics and Space Administration, Glenn Research Center, 2002.

Heckman, James J. Causal parameters and policy analysis in economics: A twentieth century retrospective. National Bureau of Economic Research, 1999.

Eskelin, Anthony Alexander. A qualitative evaluation of parameters used to assess Kenai River king salmon, 1986-2010. Alaska Dept. of Fish and Game, Division of Sport Fish, Research and Technical Services, 2010.

J, Fields R., Agulyansky A, and National Institute of Standards and Technology (U.S.), eds. Evaluation of press-and-sinter parameters for tantalum pentoxide by the diametral compression test. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

J, Fields R., Agulyansky A, and National Institute of Standards and Technology (U.S.), eds. Evaluation of press-and-sinter parameters for tantalum pentoxide by the diametral compression test. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

J, Fields R., Agulyansky A, and National Institute of Standards and Technology (U.S.), eds. Evaluation of press-and-sinter parameters for tantalum pentoxide by the diametral compression test. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

J, Fields R., Agulyansky A, and National Institute of Standards and Technology (U.S.), eds. Evaluation of press-and-sinter parameters for tantalum pentoxide by the diametral compression test. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

J, Fields R., Agulyansky A, and National Institute of Standards and Technology (U.S.), eds. Evaluation of press-and-sinter parameters for tantalum pentoxide by the diametral compression test. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

J, Fields R., Agulyansky A, and National Institute of Standards and Technology (U.S.), eds. Evaluation of press-and-sinter parameters for tantalum pentoxide by the diametral compression test. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1997.

Zuru, Abdullahi Abdu. Evaluation of kinetic parameters and investigation of reaction mechanisms using rising temperature thermogravimetric technique. University of Salford, 1991.

Teske, Milton E. Evaluation of the FSCBG aerial spray model's near-wake sensitivity to selected input parameters. USDA Forest Service, Forest Health Technology Enterprise Team, 1996.

N, Ghadiali, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology., and Battelle Memorial Institute, eds. Deterministic and probabilistic evaluations for uncertainty in pipe fracture parameters in leak-before-break and in-service flaw evaluations. Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1996.

Association, American Cleft Palate-Craniofacial, ed. Parameters for evaluation and treatment of patients with cleft lip/palate or other craniofacial anomalies. American Cleft Palate-Craniofacial Association, 1993.

Anselmi, Luca, and M. Vittoria Lupò Avagliano. L'efficienza della pubblica amministrazione: Misure e parametri. FrancoAngeli, 2001.

Mickan, Barbara. Parameters characterizing toxic and hazardous waste disposal sites: Management and monitoring : final report. Office for Official Publications of the European Communities, 1987.

Whitlock, Jim L. The Homestake wastewater treatment process: Biological removal of toxic parameters from cyanidation wastewaters and bioassay effluent evaluation. Elsevier Science Pub. Co, 1985.

Barringer, C. G. Evaluation of a heavy duty methanol engine with glow plug ignition: Effect of combustion parameters on emissions. Ortech International, 1992.

R, Mock Donald, and Jet Propulsion Laboratory (U.S.), eds. Evaluation of geophysical parameters measured by a Nimbus-7 microwave radiometer for the TOGA heat exchange project. National Aeronautics and Space Administration, Jet Propulsion Laboratory, California Institute of Technology, 1986.

Farmer, Stephen. Evaluation of some blood chemistry parameters as predictive indices of reproduction in captive Atlantic salmon (Salmo salar) brookstock. University of Prince Edward Island, 1988.

Hindley, Deborah. Evaluation of remote sensing to determine the catchment parameters for the Kennet drainage system: V and I project. National Remote Sensing Centre, 1992.

New Jersey. Legislature. Joint Committee on the Public Schools. School Choice Subcommittee. Committee meeting of Joint Committee on the Public Schools, School Choice Subcommittee: Information on the role, requirements, and parameters of charter school authorizers : [September 28, 2010, Trenton, New Jersey]. New Jersey Office of Legislative Services, Public Information Office, Hearing Unit, 2010.

IEEE Communications Society. Transmission Systems Committee., IEEE Standards Board, and American National Standards Institute, eds. IEEE standard methodologies for specifying voicegrade channel transmission parameters and evaluating connection transmission performance for speech telephony. Institute of Electrical and Electronics Engineers, 1990.

Luca, Luigi De. First evaluation of the main parameters in the dynamics of the Small Expendable Deployer System (SEDS) for a tethered satellite. Langley Research Center, 1990.

United States. National Aeronautics and Space Administration, ed. Quantitative non-destructive evaluation of composite materials based on ultrasonic parameters: Semiannual progress report, September 15, 1986 - March 15, 1987. Washington University, Dept. of Physics, Laboratory for Ultrasonics, 1987.

United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., ed. First evaluation of the main parameters in the dynamics of the Small Expendable Deployer System (SEDS) for a tethered satellite. National Aeronautics and Space Administration, Scientific and Technical Information Division, 1990.

United States. National Aeronautics and Space Administration., ed. Quantitative non-destructive evaluation of composite materials based on ultrasonic parameters: Semiannual progress report, September 15, 1986 - March 15, 1987. Washington University, Dept. of Physics, Laboratory for Ultrasonics, 1987.

United States. National Aeronautics and Space Administration., ed. Quantitative non-destructive evaluation of composite materials based on ultrasonic parameters: Semiannual progress report, September 15, 1986 - March 15, 1987. Washington University, Dept. of Physics, Laboratory for Ultrasonics, 1987.