Log in

Relevant bibliographies by topics / Excitation volume

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Excitation volume'

Author: Grafiati

Published: 4 June 2021

Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Excitation volume.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Excitation volume"

1

Steendijk, P., E. T. Van der Velde, and J. Baan. "Left ventricular stroke volume by single and dual excitation of conductance catheter in dogs." American Journal of Physiology-Heart and Circulatory Physiology 264, no. 6 (June 1, 1993): H2198—H2207. http://dx.doi.org/10.1152/ajpheart.1993.264.6.h2198.

Full text

Abstract:

The conductance method employs a multielectrode catheter to measure intracavitary electric conductance from which left ventricular volume is estimated. A dual-excitation method introduced by us uses a more homogeneous electric field and thereby should enable more accurate volume estimation. In six anesthetized open-chest dogs we compared stroke volume obtained from electromagnetic flow probes with the conventional single-excitation method and with the new dual-excitation conductance method. Caval occlusion and left atrial hemorrhage were used to obtain a wide range of stroke volumes. The slope of the relation between stroke volume calculated from the flow probes and from the conductance catheter increased significantly (P < 0.001) from 0.635 with single excitation to 0.835 with dual excitation, but the interanimal variability was not reduced. The linearity of the relation was substantially improved.

APA, Harvard, Vancouver, ISO, and other styles

2

FRANZONE, PIERO COLLI, LUCIANO GUERRI, and BRUNO TACCARDI. "Spread of Excitation in a Myocardial Volume:." Journal of Cardiovascular Electrophysiology 4, no. 2 (April 1993): 144–60. http://dx.doi.org/10.1111/j.1540-8167.1993.tb01219.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Jensen, Dye J., Jean L. Delayre, and Ponnada A. Narayana. "Localized T1 measurements using volume-selective excitation." Journal of Magnetic Resonance (1969) 69, no. 3 (October 1986): 552–58. http://dx.doi.org/10.1016/0022-2364(86)90175-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

SELG, M., M. KINK, R. KINK, J. MAKSIMOV, and I. MARTINSON. "TEMPERATURE DEPENDENCE OF LASER-INDUCED HOT LUMINESCENCE OF SELF-TRAPPED EXCITONS IN SOLID XENON." Surface Review and Letters 09, no. 01 (February 2002): 609–13. http://dx.doi.org/10.1142/s0218625x02002713.

Full text

Abstract:

Hot luminescence of self-trapped excitons in solid xenon has been investigated in a wide temperature range (from LHeT to 100 K), using X-ray and two-photon excimer laser (ArF and KrF) excitation. Hot luminescence of bulk Xe crystals of volume 2 cm 3 appears to be very sensitive to both the temperature and the quality of the samples, while its highest intensity has been registered under KrF laser excitation. The experimental results are in good accordance with a recent nonperturbative quantum relaxation theory of strong local vibrational excitations.

APA, Harvard, Vancouver, ISO, and other styles

5

Ediger, M. D., and M. D. Fayer. "Electronic excitation transport in disordered infinite volume systems." International Reviews in Physical Chemistry 4, no. 3 (January 1985): 207–35. http://dx.doi.org/10.1080/01442358509353360.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Aoki, Kohei, Atsushi Okamoto, Yuta Wakayama, Akihisa Tomita, and Satoshi Honma. "Selective multimode excitation using volume holographic mode multiplexer." Optics Letters 38, no. 5 (February 28, 2013): 769. http://dx.doi.org/10.1364/ol.38.000769.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fiebig, Wiesław. "Influence of the Inter Teeth Volumes on the Noise Generation in External Gear Pumps." Archives of Acoustics 39, no. 2 (March 1, 2015): 261–66. http://dx.doi.org/10.2478/aoa-2014-0030.

Full text

Abstract:

Abstract The paper shows the new method for noise reduction in external gear pumps based on the analysis of the pressure in inter teeth volumes. The simulation model and measurement results of pressure changes in the inter teeth volume has been presented. Based on simulation results an additional volume has been obtained, which is connected to the inter teeth volume (decompression filter volume). Due this additional volume the build down processes in the pump are longer and the pressure overdue in the inter teeth volumes are smaller. This leads to the reduction of the dynamical excitation forces inside the pump and noise, especially in the higher frequency rangeI.

APA, Harvard, Vancouver, ISO, and other styles

8

White, John, Victoria Centonze, David Wokosin, and William Mohler. "Using Multiphoton Microscopy for the Study of Embryogenesis." Microscopy and Microanalysis 3, S2 (August 1997): 307–8. http://dx.doi.org/10.1017/s1431927600008424.

Full text

Abstract:

Multiphoton fluorescence excitation imaging is an optical sectioning technique for fluorescence microscopy. At very high photon densities, two or more photons may coordinately excite an energy transition in a fluorophore that corresponds to the sum of the energies of the individual photons. by this means, a fluorophore may be excited by a wavelength that is considerably longer than its single photon excitation wavelength. Ultra-fast pulsed (femtosecond) lasers can produce the peak power densities in the focal volume of an objective lens needed to provide sufficient 2- or 3- photon excitation events for imaging. The use of short-pulse lasers provides the high peak powers necessary for imaging yet with modest mean power levels that do not thermally damage biological specimens. Production of multiphoton events depends on the square of photon density for 2-photon excitation and the cube of photon density for 3-photon excitation. The power density therefore rapidly falls off away from the focal volume of an objective lens, thereby confining fluorescence excitation to the focal volume.

APA, Harvard, Vancouver, ISO, and other styles

9

Danton, Mark H. D., Gerald F. Greil, John G. Byrne, Michael Hsin, Lawrence Cohn, and Stephan E. Maier. "Right ventricular volume measurement by conductance catheter." American Journal of Physiology-Heart and Circulatory Physiology 285, no. 4 (October 2003): H1774—H1785. http://dx.doi.org/10.1152/ajpheart.00048.2003.

Full text

Abstract:

Continuous ventricular volume measurement by the conductance method assumes a homogeneous electrical field dispersed throughout and contained within the ventricle. Because of dense trabeculation and complex geometry, right ventricular (RV) volume description by this method may be seriously compromised. This study sought to determine the accuracy and limitations of RV volume measurement by conductance, with magnetic resonance (MR) imaging (MRI) used as a reference, in the porcine RV. Anesthetized pigs ( n = 5, 45–55 kg) were placed in a 1.5-T magnet, and ECG-gated transverse MR images (5-mm slices) were acquired during the complete cardiac cycle. RV cavity volumes were subsequently determined by Simpson's technique. Animals were then instrumented with an RV conductance catheter and an ultrasonic pulmonary artery flow probe. Conductance catheter signals were recorded using single- and dual-field (SF and DF) excitation, and the saline-dilution technique was used to correct volumes for parallel conductance. The gain factor (α) was calculated as the ratio of conductance- to MRI-derived stroke volume (αSV). Variation of α during the cardiac cycle was computed by comparing RV conductance volumes with 1) MRI volumes at isochronal time points within the cardiac cycle [α( t)] and 2) the pulmonary flow integral during ejection. After calibration, the conductance-MRI volume relation was modeled linearly with good correlation [ r = 0.96 (SF) and r = 0.94 (DF)], close to the line of identity. Individual conductance-MRI plots displayed a slight curvilinear relation that was concave toward the MRI axis. Consistent with this finding, α( t) varied significantly during the cardiac cycle (0.49 and 0.39 by SF for end systole and end diastole, respectively, P = 0.011). DF excitation resulted in improved volume measurement [αSV = 0.41 (SF) and 0.96 (DF)], with less variation in α( t) (1.0 and 0.92 by DF for end systole and end diastole, respectively, P = 0.66). These results indicate that, with calibration, the conductance method can measure absolute RV volume under steady-state conditions. However, the curvilinearity and α( t) variation would indicate the potential for nonlinearity when RV volumes are varied over a wider range.

APA, Harvard, Vancouver, ISO, and other styles

10

Zhou, Kun, Jian Tian, Qiushi Zhang, Xiangxi Meng, Kun Yang, and Qiushi Ren. "Simulation and quantitative analysis of fluorescence intensity distribution based on the Monte Carlo method." Journal of Innovative Optical Health Sciences 08, no. 06 (October 27, 2015): 1550038. http://dx.doi.org/10.1142/s1793545815500388.

Full text

Abstract:

The Monte Carlo method is a versatile simulation algorithm to model the propagation of photons inside the biological tissues. It has been applied to the reconstruction of the fluorescence molecular tomography (FMT). However, such method suffers from low computational efficiency, and the time consumption is not desirable. One way to solve this problem is to introduce a priori knowledge which will facilitate iterative convergence. We presented an in vivo simulation environment for fluorescence molecular tomography (ISEFMT) using the Monte Carlo method to simulate the photon distribution of fluorescent objects and their sectional view in any direction quantitatively. A series of simulation experiments were carried out on different phantoms each with two fluorescent volumes to investigate the relationship among fluorescence intensity distribution and the excitation photon number, the locations and sizes of the fluorescence volumes, and the anisotropy coefficient. A significant principle was discovered, that along the direction of the excitation light, the fluorescent volume near the excitation point will provide shelter effect so that the energy of the fluorescent volume farther away from the excitation point is relatively lower. Through quantitative analysis, it was discovered that both the photon energy distribution on every cross section and the fluorescence intensity distributed in the two volumes exhibit exponential relationships. The two maximum positions in this distribution correspond to the centers of fluorescent volumes. Finally, we also explored the effect of the phantom coefficients on the exponential rule, and found out that the exponential rule still exists, only the coefficient of the exponential rule changed. Such results can be utilized in locating the positions of multiple fluorescent volumes in complicated FMT reconstruction involving multiple fluorescent volumes. Thus, a priori knowledge can be generalized, which would accelerate the reconstruction of FMT and even other images.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Excitation volume"

1

Soukup, Darin J. "A coupled local mode approach to laterally heterogeneous anisotropic media, volume scattering, and T-wave excitation /." Thesis, Connect to this title online; UW restricted, 2004. http://hdl.handle.net/1773/6847.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fleischer, Mario, Alexander Mainka, Steffen Kürbis, and Peter Birkholz. "How to precisely measure the volume velocity transfer function of physical vocal tract models by external excitation." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-234483.

Full text

Abstract:

Recently, 3D printing has been increasingly used to create physical models of the vocal tract with geometries obtained from magnetic resonance imaging. These printed models allow measuring the vocal tract transfer function, which is not reliably possible in vivo for the vocal tract of living humans. The transfer functions enable the detailed examination of the acoustic effects of specific articulatory strategies in speaking and singing, and the validation of acoustic plane-wave models for realistic vocal tract geometries in articulatory speech synthesis. To measure the acoustic transfer function of 3D-printed models, two techniques have been described: (1) excitation of the models with a broadband sound source at the glottis and measurement of the sound pressure radiated from the lips, and (2) excitation of the models with an external source in front of the lips and measurement of the sound pressure inside the models at the glottal end. The former method is more frequently used and more intuitive due to its similarity to speech production. However, the latter method avoids the intricate problem of constructing a suitable broadband glottal source and is therefore more effective. It has been shown to yield a transfer function similar, but not exactly equal to the volume velocity transfer function between the glottis and the lips, which is usually used to characterize vocal tract acoustics. Here, we revisit this method and show both, theoretically and experimentally, how it can be extended to yield the precise volume velocity transfer function of the vocal tract.

APA, Harvard, Vancouver, ISO, and other styles

3

Hincelin, Gérard. "Renforcement des effets photoélectriques de surface et de volume par excitation de plasmons de surface dans des films minces d'argent ou aluminium." Paris 11, 1985. http://www.theses.fr/1985PA112010.

Full text

Abstract:

Des films minces d’Aluminium ou d’Argent ont été formés par évaporation sous ultravide (p<5. 10⁻¹¹ Torr), sur l’une des faces d’un prisme utilisé pour exciter une Onde de Plasma de Surface (OPS) à l’interface plane film/vide, par la méthode de Réflexion Totale Atténuée (RTA). En déposant à la surface du film métallique une couche superficielle de Cs, puis de Cs oxydé, le travail de sortie électronique peut être abaissé jusqu’à une valeur voisine de 1 eV. Cette technique a permis d’étudier le renforcement très important de l’Emission Photoélectrique par l’OPS, aux fréquences inférieures à la fréquence de plasma de surface. Les propriétés optiques du système film métallique/couche superficielle, sont déterminées en mettant à profit la très grande précision de la méthode RTA. Nous montrons que dans le domaine spectral étudié, l’Emission Photoélectrique peut s’interpréter à partir des modèles classiques d’effet de volume et d’effet de surface.

APA, Harvard, Vancouver, ISO, and other styles

4

Ivan, Michaela. "Résonateurs à haute fréquence à ondes de volume en réalisatin MEMS sur tranche silicium." Phd thesis, Université de Franche-Comté, 2012. http://tel.archives-ouvertes.fr/tel-00803165.

Full text

Abstract:

Le domaine des résonateurs MEMS (Micro-Electro-Mechanical Systems) est aujourd'hui le siège de diverses compétitions entre les producteurs afin d'améliorer les performances en terme de miniaturisation, intégrabilité, coûts de production etc. Ce travail de thèse s'inscrit dans un projet global de développement de résonateurs MEMS à ondes de volume compatibles avec la technologie des circuits intégrées. L'objectif est de valider le principe d'excitation des ondes acoustiques de volume en extension-compression par voie électrostatique dans des substrats monocristallins et aussi d'explorer les possibilités offertes par ces modes pour le confinement de l'énergie acoustique, technique plus largement exploitée dans le domaine des résonateurs à quartz que dans celui des MEMS. En ce sens, une nouvelle structure mono-port en silicium, fixée sur un support en verre, a été étudiée et modélisée analytiquement en vue de son implémentation dans une chaine de fabrication. Les modèles originaux développés dans ce cadre nous ont permis d'estimer les paramètres électriques du circuit équivalent, les déplacements mécaniques statique et dynamique propres au fonctionnement de la structure, autant en mode vibratoire d'extension-compression qu'en mode de flexion. Une étude théorique bidimensionnelle basée sur l'évaluation des courbes de dispersion d'une plaque en silicium a été menée afin d'évaluer les moyens de piégeage de l'énergie au centre de la structure fonctionnant en mode de volume. Tout en exploitant les microtechniques disponibles au sein de la Centrale MIMENTO de l'Institut FEMTO-ST, plusieurs séries de résonateurs ont été fabriquées sur substrat silicium pleine plaque. La fréquence fondamentale de vibration se situe aux alentours de 10 MHz pour le mode d'extension compression et de 70 kHz pour le mode de flexion. On détaille la caractérisation par voie mécanique et électrique. L'intégration des dispositifs fonctionnant en mode de flexion en boucle d'oscillation à l'aide d'un montage à base de point Wien est démontrée ainsi qu'une application de type capteur gravimétrique.

APA, Harvard, Vancouver, ISO, and other styles

5

Paul, Uchenna Prince. "Fluorescence Detectors for Proteins and Toxic Heavy Metals." Diss., CLICK HERE for online access, 2004. http://contentdm.lib.byu.edu/ETD/image/etd416.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Belkadi, Nesrine. "Nouveaux MEMS C-BAR : résonateurs capacitifs à ondes élastiques de volume piégées sur substrat Silicium." Thesis, Besançon, 2016. http://www.theses.fr/2016BESA2088.

Full text

Abstract:

Ces travaux de thèse décrivent l’étude et la réalisation de résonateurs MEMS (Micro-ElectroMechanical Systems) acoustiques à couplage capacitif dits C-BAR (Capacitive Bulk Acoustic Resonator). Les C-BAR exploitent les modes d’extension-compression d’épaisseur en mode fondamental à 9, 45MHz. L’élément vibrant est constitué de Si-monocristallin purement résistif et d’orientation (100). Notre but consiste à transposer au monde des MEMS a` excitation capacitive les caractéristiques de stabilité des résonateurs piézoélectriques BAW utilisés dans les sources de fréquences embarquées. Notre stratégie de développement s’est fondée sur l’exploitation de deux concepts originaux dans les domaines respectifs électrique et acoustique : l’intérêt immédiat des résonateurs MEMS-Si capacitifs tient à la disponibilité du matériau, au faible coût unitaire, à la produire à grande échelle, ainsi qu’à la robustesse. A plus longue échéance, cet intérêt tient au potentiel d’intégration avec l’électronique de commande ; Cette recherche est motivée par la nécessité d’éliminer les pertes structurelles dans les résonateurs MEMS. Grâce à l’étude de la dispersion acoustique des ondes élastiques guidées dans une plaque de Si, nous avons pu contrôler les bandes d’arrêt par modification locale des caractéristiques de la propagation afin de confiner l’énergie acoustique au centre du résonateur. Une première partie de ces travaux est consacrée à la modélisation du C-BAR. Grâce à des simulations FEM appuyées sur des calculs analytiques, nous avons défini les limites imposées aux paramètres constructifs pour l’obtention de performances satisfaisantes pour les applications visées. Nous avons notamment quantifié le nécessaire compromis entre les quantités antagonistes constituées par le k2, limité par la rigidité statique de la plaque, et le Q, limité par les constantes de dispersion des modes exploités et le facteur d’aspect de la plaque. La deuxième partie est consacrée à la micro-fabrication du C-BAR exploitant les micro techniques disponibles au sein de la Centrale MIMENTO
This PhD work describes the study and realization of capacitive Bulk Acoustic Waves MEMS resonators (C-BAR) exploiting the thicknessextensional vibration modes at 9, 45MHz of a mono-crystalline silicon plate (100). The aim of this research consists in translated to the domain of capacitive MEMS the good performances of BAW resonators for embedded frequency sources. The proposed work proposes new resonant structures bearing some originality from electric and acoustic viewpoints : capacitive full Si-MEMS have some immediate interest in the field of material availability, low cost per item, volume production and robustness, notwithstanding their know ability for electronic integration ; This research was motivated by the need to eliminate structural losses to reach the limits imposed by the material itself. With help of a study of dispersion curves, we managed a control of acoustic confinement by means of a local patterning of the surface of the vibrating element. By a proper mastering of the stop band of guided elastic waves in the structure, we can overcome the intrinsic limitations of structural MEMS. The first lock of this work is dedicated to the modeling of the C-BARs. It uses a combination of analytic and FEA calculations to frame the actual design of the resonators. This permits us to determine the limits imposed to the performances of such structures. This part especially points out the contradictory requirements of the C-BARs in terms of electromechanical coupling factor and of surtension coefficient. The second lock describes the issues of the micro-fabrication of the C-BARs at MIMENTO clean room facility

APA, Harvard, Vancouver, ISO, and other styles

7

Beckstein, Pascal. "Methodenentwicklung zur Simulation von Strömungen mit freier Oberfläche unter dem Einfluss elektromagnetischer Wechselfelder." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-232474.

Full text

Abstract:

Im Bereich der industriellen Metallurgie und Kristallzüchtung treten bei zahlreichen Anwendungen, wo magnetische Wechselfelder zur induktiven Beeinflussung von leitfähigen Werkstoffen eingesetzt werden, auch Strömungen mit freier Oberfläche auf. Das Anwendungsspektrum reicht dabei vom einfachen Aufschmelzen eines Metalls in einem offenen Tiegel bis hin zur vollständigen Levitation. Auch der sogenannte RGS-Prozess, ein substratbasiertes Kristallisationsverfahren zur Herstellung siliziumbasierter Dünnschichtmaterialien, ist dafür ein Beispiel. Um bei solchen Prozessen die Interaktion von Magnetfeld und Strömung zu untersuchen, ist die numerische Simulationen ein wertvolles Hilfsmittel. Für beliebige dreidimensionale Probleme werden entsprechende Berechnungen bisher durch eine externe Kopplung kommerzieller Programme realisiert, die für Magnetfeld und Strömung jeweils unterschiedliche numerische Techniken nutzen. Diese Vorgehensweise ist jedoch im Allgemeinen mit unnötigem Rechenaufwand verbunden. In dieser Arbeit wird ein neu entwickelter Methodenapparat auf Basis der FVM vorgestellt, mit welchem sich diese Art von Berechnungen effizient durchführen lassen. Mit der Implementierung dieser Methoden in foam-extend, einer erweiterten Version der quelloffenen Software OpenFOAM, ist daraus ein leistungsfähiges Werkzeug in Form einer freien Simulationsplattform entstanden, welches sich durch einen modularen Aufbau leicht erweitern lässt. Mit dieser Plattform wurden in foam-extend auch erstmalig dreidimensionale Induktionsprozesse im Frequenzraum gelöst.

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Guifang. "Stability and excitation of nonlinear guided waves." 1991. http://catalog.hathitrust.org/api/volumes/oclc/27666592.html.

Full text

Abstract:

Thesis (Ph. D.)--University of Wisconsin--Madison, 1991.
Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

9

Piech, Garrett Andrew. "Electron excitation of metastable rare-gas atoms." 1998. http://catalog.hathitrust.org/api/volumes/oclc/42590343.html.

Full text

Abstract:

Thesis (Ph. D.)--University of Wisconsin--Madison, 1998.
Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 152-156).

APA, Harvard, Vancouver, ISO, and other styles

10

Lockwood, Ronald B. "Experimental investigation of electron impact excitation of metastable helium." 1994. http://catalog.hathitrust.org/api/volumes/oclc/32027491.html.

Full text

Abstract:

Thesis (Ph. D.)--University of Wisconsin--Madison, 1994.
Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 75-76).

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Excitation volume"

1

1927-, Balkanski Minko, Birman Joseph Leon 1927-, Sébenne C. A, and Wallis R. F. 1924-, eds. Elementary excitations in solids: A special volume in honour of Professor Minko Balkanski on the occasion of his 65th birthday. Amsterdam: North-Holland, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

(Editor), Vladimir M. Agranovich, and G. Franco Bassani (Editor), eds. Electronic Excitations in Organic Based Nanostructures, Volume 31 (Thin Films and Nanostructures). Academic Press, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

(Editor), Vladimir M. Agranovich, and G. Franco Bassani (Editor), eds. Electronic Excitations in Organic Based Nanostructures, Volume 31 (Thin Films and Nanostructures). Academic Press, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Birman, Joseph L., and Claude Sebenne. Elementary Excitations in Solids: A Special Volume in Honour of Professor Minko Balkanski on the Occasion of His 65th Birthday. North-Holland, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Excitation volume"

1

Nilsson, Anders, and Bilong Liu. "Random Excitation of Structures." In Vibro-Acoustics, Volume 2, 339–78. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47934-6_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jerome, Trevor W., Micah R. Shepherd, and Stephen A. Hambric. "Acoustic Excitation of a Flanged Joint." In Nonlinear Dynamics, Volume 1, 211–24. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74280-9_23.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Osgood, Richard, Gunjit Bir, Heena Mutha, Bart Peeters, Marcin Luczak, and Gert Sablon. "Full-scale modal wind turbine tests: comparing shaker excitation with wind excitation." In Structural Dynamics and Renewable Energy, Volume 1, 113–24. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9716-6_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Daborn, P. M., P. R. Ind, and D. J. Ewins. "Replicating Aerodynamic Excitation in the Laboratory." In Topics in Modal Analysis, Volume 7, 259–72. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-6585-0_24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Peeters, Bart, Alex Carrella, Jenny Lau, Mauro Gatto, and Giuliano Coppotelli. "Advanced shaker excitation signals for aerospace testing." In Advanced Aerospace Applications, Volume 1, 229–41. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9302-1_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Brandt, Anders, and Rune Brincker. "Impact Excitation Processing for Improved Frequency Response Quality." In Structural Dynamics, Volume 3, 89–95. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9834-7_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Manson, G., K. Worden, and P. I. Reed. "Analysis of Nonlinear System Response to an Impulse Excitation." In Nonlinear Dynamics, Volume 2, 297–308. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-04522-1_28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Nagesh, Mahesh, Akhil Sharma, Randall J. Allemang, and Allyn W. Phillips. "Excitation Techniques for Nonlinear Dynamic Systems: A Summary." In Nonlinear Structures & Systems, Volume 1, 157–73. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47626-7_25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Piraccini, M., D. Di Maio, and R. Di Sante. "Nonlinear Modal Testing Performed by Pulsed-Air Jet Excitation System." In Nonlinear Dynamics, Volume 1, 155–70. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29739-2_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Philp, R., P. Reynolds, and D. S. Nyawako. "Semi-Active Control of Staircase Vibration Under Human Excitation." In Civil Engineering Topics, Volume 4, 263–72. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9316-8_24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Excitation volume"

1

Van Woerkom, L. D., and W. E. Cooke. "Complementary branching ratios by satellite excitation." In AIP Conference Proceedings Volume 147. AIP, 1986. http://dx.doi.org/10.1063/1.35973.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bobb, L. C., M. B. Rankin, and J. P. Davis. "Two-photon excitation studies in xenon." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35767.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Goldsmith, J. E. M. "Multiphoton excitation techniques for combustion diagnostics." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35772.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Rinker, George. "Nuclear excitation through the dynamic hyperfine effect." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35921.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bron, W. E. "Picosecond laser induced nonlinear excitation of semiconductors." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35853.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rhodes, Charles K. "Atomic inner-shell excitation by nonlinear processes." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35805.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Biedenharn, L. C., K. Boyer, and Johndale C. Solem. "Possibility of grasing by laser-driven nuclear excitation." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35928.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Cantrell, C. D. "Theoretical approaches to understanding molecular multiple-photon excitation." In AIP Conference Proceedings Volume 146. AIP, 1986. http://dx.doi.org/10.1063/1.35719.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bhatia, A. K., Richard J. Drachman, and Lali Chatterjee. "De-excitation of muonic molecules by internal conversion." In AIP Conference Proceedings Volume 181. AIP, 1988. http://dx.doi.org/10.1063/1.37916.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

O’Connell, J. S. "Electromagnetic excitation of the delta resonance in nuclei." In AIP Conference Proceedings Volume 163. AIP, 1987. http://dx.doi.org/10.1063/1.36936.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!