Log in

Relevant bibliographies by topics / Experimental Stress Analysis / Journal articles

To see the other types of publications on this topic, follow the link: Experimental Stress Analysis.

Journal articles on the topic 'Experimental Stress Analysis'

Author: Grafiati

Published: 4 June 2021

Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Experimental Stress Analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Patterson, Eann, Richard Greene, Manuel Heredia, and Jon Lesniak. "OS03W0354 Hybrid thermal methods in experimental stress analysis." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2003.2 (2003): _OS03W0354. http://dx.doi.org/10.1299/jsmeatem.2003.2._os03w0354.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lee, Ho Beom. "Evaluation of Residual Stress using IITC of Experimental Stress Analysis on Concrete Structure." Journal of the Korean Society of Civil Engineers 34, no. 2 (2014): 415. http://dx.doi.org/10.12652/ksce.2014.34.2.0415.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Altuntas, Mehmet, Ozlem Salman, and Cevat Erdem Imrak. "Experimental Stress Analysis of Elevator Guiding Equipment." Key Engineering Materials 572 (September 2013): 177–80. http://dx.doi.org/10.4028/www.scientific.net/kem.572.177.

Full text

Abstract:

Guide rails which take place in structure of elevator, are the important elements for safety of elevator systems. They have attached together end to end with the fishplates and bolts, and are anchored to wall with brackets. Connections between guide rails and brackets are provided by clips. To ensure the safe operation of elevators, the guide rails, fishplates, brackets, bolts, clips have enough strength against to loads and forces which affect these elements. In this study, shear tests are performed to examine mechanical properties of bolts and clips which are used guide rail anchor element. The results which are gained from stress calculations and experiments are compared and interpreted.

APA, Harvard, Vancouver, ISO, and other styles

4

Erklig, Ahmet, and M. Akif Kütük. "Experimental Finite Element Approach for Stress Analysis." Journal of Engineering 2014 (2014): 1–7. http://dx.doi.org/10.1155/2014/643051.

Full text

Abstract:

This study aims to determining the strain gauge location points in the problems of stress concentration, and it includes both experimental and numerical results. Strain gauges were proposed to be positioned to corresponding locations on beam and blocks to related node of elements of finite element models. Linear and nonlinear cases were studied. Cantilever beam problem was selected as the linear case to approve the approach and conforming contact problem was selected as the nonlinear case. An identical mesh structure was prepared for the finite element and the experimental models. The finite element analysis was carried out with ANSYS. It was shown that the results of the experimental and the numerical studies were in good agreement.

APA, Harvard, Vancouver, ISO, and other styles

5

Berghaus, D. G. "EXPERIMENTAL STRESS ANALYSIS AND THE PERSONAL COMPUTER." Experimental Techniques 10, no. 12 (December 1986): 28–29. http://dx.doi.org/10.1111/j.1747-1567.1986.tb00597.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

KURIMURA, Akinobu. "105 Experimental Analysis of Stress Intensity Factor." Proceedings of Conference of Hokkaido Branch 2001.41 (2001): 10–11. http://dx.doi.org/10.1299/jsmehokkaido.2001.41.10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Tran, Hong Quan, and Tan Thanh Nguyen. "Stress strain experimental analysis of geopolymer concrete." IOP Conference Series: Materials Science and Engineering 1088, no. 1 (February 1, 2021): 012066. http://dx.doi.org/10.1088/1757-899x/1088/1/012066.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

ALMALEH, Ahmad, Yutaka SAWAKI, and Kiyoshi ISOGIMI. "OS01W0077 Fundamental study of caustic experimental method in thermal stress analysis : Investigation for one or two dimensional stress field in circular disk." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2003.2 (2003): _OS01W0077. http://dx.doi.org/10.1299/jsmeatem.2003.2._os01w0077.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hashimoto, Hiromu, and Yuta Sunami. "MoC-1-2 INTERNAL STRESS ANALYSIS OF WOUND ROLL CONSIDERING THERMAL-VISCOELASTIC PROPERTY AND EXPERIMENTAL VERIFICATION." Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE 2015 (2015): _MoC—1–2–1—_MoC—1–2–3. http://dx.doi.org/10.1299/jsmemipe.2015._moc-1-2-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Candas, Adem, Serpil Kurt, Ismail Gerdemeli, and Eren Kayaoglu. "An Experimental Stress Analysis of a Jib Crane." Key Engineering Materials 572 (September 2013): 173–76. http://dx.doi.org/10.4028/www.scientific.net/kem.572.173.

Full text

Abstract:

Jib cranes are a kind of material handlingmachines using in the industry such as factories, shipyards, constructionareas, and storages. Standards and regulations about them are published by API(American Petroleum Institute), FEM (The Federation Europeen de la Manutention)et al. In this study a jib crane designed by an engineering work group, were examinedin terms of static structural test analysis before put it into use according tothe API Spec 2. Firstly, critical areas, which have the highest stress values,were determined by finite element method in a commercial analysis program. The nextstep is the application of strain gages on the structure and initial referencetest values are obtained just before the assembling. Two tests were done afterthe jib crane was assembled under circumstances with no load and test load.Finally, strain and stress values were calculated and the resulting stressobtained from tests and finite element method analysis results were comparedwith each other.

APA, Harvard, Vancouver, ISO, and other styles

11

jain, Yash. "Experimental Analysis of Thermal Stress Using Alternative Polariscope." International Journal for Research in Applied Science and Engineering Technology V, no. IX (September 30, 2017): 601–7. http://dx.doi.org/10.22214/ijraset.2017.9088.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

., S. P. Gosavi. "EXPERIMENTAL STRESS ANALYSIS AND FEA OF DENTAL IMPLANTS." International Journal of Research in Engineering and Technology 05, no. 03 (March 25, 2016): 328–31. http://dx.doi.org/10.15623/ijret.2016.0503061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Vigneshwaran, K., Dinesh Shanmugam, and C. Balasuthagar. "Experimental and analytical stress analysis of spur gear." IOP Conference Series: Materials Science and Engineering 912 (September 12, 2020): 022043. http://dx.doi.org/10.1088/1757-899x/912/2/022043.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Pang, H. L. J. "EXPERIMENTAL STRESS ANALYSIS OF FATIGUE CRACKS RY SPATE." Experimental Techniques 17, no. 2 (March 1993): 20–22. http://dx.doi.org/10.1111/j.1747-1567.1993.tb00734.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Laermann, Karl-Hans. "Photoviscoelasticity—An experimental method in viscoelastic stress analysis." Applied Mathematics and Mechanics 8, no. 11 (November 1987): 1019–26. http://dx.doi.org/10.1007/bf02482687.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Sapieta, Milan, Vladimir Dekys, and Milan Uhríčik. "Experimental Measurement of Stress Distribution." Applied Mechanics and Materials 816 (November 2015): 416–20. http://dx.doi.org/10.4028/www.scientific.net/amm.816.416.

Full text

Abstract:

The main purpose of this paper is to made experimental stress analysis of flat specimen. Specimens were cycles with constant amplitude loaded in order to maintain adiabatic conditions. Whole loading process of specimens was recorded by infrared camera with high sensitivity. Subsequently values of stress were according to equations for thermoelastic analysis evaluated on the face of specimens. Evaluate values of stress are equal to the sum of the principal stresses thus it is the first stress invariant.

APA, Harvard, Vancouver, ISO, and other styles

17

Mirzayeva, Intizar Kahraman. "The Scopes of Experimental-phonetic Analysis." Theory and Practice in Language Studies 6, no. 10 (October 1, 2016): 1912. http://dx.doi.org/10.17507/tpls.0610.03.

Full text

Abstract:

The article investigates the nature of prosodic features of speech. The discussed problem has always been interested the linguists for many years. The prosodic features such as length, accent and stress, tone, intonation and others are analysesd in the article. The article states that from the beginning of the investigation of these features were based primarily on segments – vowels and consonants and prosodic features were either ignored or forced into an inappropriate segmental mould. The author explains the meaning of the term of ‘prosodic means’. She writes that ‘prosodic means’ is derived from the Greek ‘prosodia’ meaning a musical term which appears to signify something like ‘song sung to music’ or ‘sung accompaniment’. It implies that prosody is the musical accompaniment to the words themselves. Recently, the term covers such things as rhythmical patterns, rhyming schemes and verse structure. It is necessary to stress that in linguistic contexts it encounters with a different meaning such as characteristics of utterances as stress and intonation.

APA, Harvard, Vancouver, ISO, and other styles

18

Chu, Tai-Ming, and Rang Feng. "Determination of Stress Distribution In Various Ankle-Foot Orthoses: Experimental Stress Analysis." JPO Journal of Prosthetics and Orthotics 10, no. 1 (1998): 11–16. http://dx.doi.org/10.1097/00008526-199801010-00004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Tait, R. B. "Failure analysis and experimental stress analysis of a threaded rotating shaft." Engineering Failure Analysis 5, no. 2 (June 1998): 79–89. http://dx.doi.org/10.1016/s1350-6307(98)00004-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Zhao, Chun Feng, Bao Lai Yu, and Cheng Zhao. "Experimental Analysis on Shear Behavior of Sand-Concrete Interface." Applied Mechanics and Materials 204-208 (October 2012): 893–98. http://dx.doi.org/10.4028/www.scientific.net/amm.204-208.893.

Full text

Abstract:

In order to study the shear behavior of sand-concrete structure interface, shear stress and relative displacement curves were obtained through a series of direct shear tests, in the procedure of which the roughness of interfaces was quantified into 3 grades and the stress history can be achieved by loading the sand to an initial normal stress and then unloading to a normal stress to shear. Through analyzing the curves, several conclusions can be obtained as follows: Shear stress increases with the initial normal stress and roughness at the same tangential displacement. The initial shear modulus can be improved in case of the increase of initial normal stress and roughness. The friction coefficient can be obtained by fitting the curve of the maximum shear stress and normal stress corresponded to Mohr-Coulomb Criterion linearly. The friction coefficient of sand-concrete interface increases with roughness as well as its increase range.

APA, Harvard, Vancouver, ISO, and other styles

21

Mohd Nor, Mohd Khir, Rade Vignjevic, and James Campbell. "Plane-Stress Analysis of the New Stress Tensor Decomposition." Applied Mechanics and Materials 315 (April 2013): 635–39. http://dx.doi.org/10.4028/www.scientific.net/amm.315.635.

Full text

Abstract:

The accuracy and reliability of the new stress tensor decomposition to capture the plasticity behaviour of orthotropic materials under plane-stress conditions was examined in this paper. No experiment was required to perform this work. Therefore, the suitable, published paper which provides a relevant test result and sufficient material properties to characterise the new stress tensor decomposition, was used. This new stress tensor decomposition was used to presents a new yield criterion for orthotropic sheet metals under plane-stress conditions in this work. This was done by assuming the yield surface to be circular in the new deviatoric plane. The predictions of the new effectice stress expression were then compared with the experimental data of 6000 series aluminium alloy sheet (A6XXX-T4) and Al-killed cold-rolled steel sheet SPCE. The predicted new yield surfaces are in good agreement with respect to the experimental data for two materials (A6XXX-T4 and SPCE).

APA, Harvard, Vancouver, ISO, and other styles

22

Qureshi, Sajid Ahmed, and Alhayat Getu Temesgen. "An Experimental Analysis of Stress Relaxation in Nonwoven Fabrics." Research Journal of Textile and Apparel 18, no. 4 (November 1, 2014): 38–43. http://dx.doi.org/10.1108/rjta-18-04-2014-b004.

Full text

Abstract:

The current research deals with an analysis of stress relaxation in nonwoven fabrics with different gsm values with a view to understand how these nonwovens behave under an applied stress for a given load over a constant period of time. An electronic stress relaxation tester is indigenously designed for this purpose which works on the strain gauge principle of measuring loads applied to the specimen at any given instant of time during the experiment. The respective stress values are calculated for corresponding load values for each specimen with every thirty seconds passage of time. The results obtained are graphically analyzed and it is revealed that the stress relaxation percentage is significantly different for the same nonwoven materials, but with different gsm values. It is observed that nonwovens do possess the property of decaying the stress generated due to external loads and the extent to which this happens depends to a considerable extent on the gsm of the structure along with other factors, like type of fiber and bonding.

APA, Harvard, Vancouver, ISO, and other styles

23

Candas, Adem, and Eren Kayaoğlu. "FEM and Experimental Stress Analysis of a Jib Crane." Applied Mechanics and Materials 395-396 (September 2013): 877–80. http://dx.doi.org/10.4028/www.scientific.net/amm.395-396.877.

Full text

Abstract:

Finite Element Method (FEM) and strain gage technique are used for analysing strain and stresses values on a jib cranes according to the standards. API and SAE J987 standards describe the test procedure and state the stress limits for cranes. The crane is constructed on a petroleum platform on the Caspian Sea. FEM was used to determine the critical points, which have high stress on the structure. Strain gages applied on these points are used to measure the strain and then stresses were calculated for each point. FEM and experiments’ results were compered to determine the differences and errors.

APA, Harvard, Vancouver, ISO, and other styles

24

Mitishita, Rodrigo S., Gabriel M. Oliveira, Tainan G. M. Santos, and Cezar O. R. Negrão. "Pressure transmission in yield stress fluids - An experimental analysis." Journal of Non-Newtonian Fluid Mechanics 261 (November 2018): 50–59. http://dx.doi.org/10.1016/j.jnnfm.2018.08.007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Morin, D. L., W. H. Douglas, M. Cross, and R. Delong. "Biophysical stress analysis of restored teeth: experimental strain measurement." Dental Materials 4, no. 1 (February 1988): 41–48. http://dx.doi.org/10.1016/s0109-5641(88)80087-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Harwood, N. "Relative assessment of full field experimental stress analysis techniques." Strain 21, no. 3 (August 1985): 119–21. http://dx.doi.org/10.1111/j.1475-1305.1985.tb00575.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

O'Brien, E. W. "Progress in experimental stress analysis for Airbus aircraft design." Strain 31, no. 4 (November 1995): 131–34. http://dx.doi.org/10.1111/j.1475-1305.1995.tb00976.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Müller, W. H. "Mathematical vs. Experimental Stress Analysis of Inhomogeneities in Solids." Le Journal de Physique IV 06, no. C1 (January 1996): C1–139—C1–148. http://dx.doi.org/10.1051/jp4:1996114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Shukla, A., and H. Nigam. "A numerical-experimental analysis of the contact stress problem." Journal of Strain Analysis for Engineering Design 20, no. 4 (October 1985): 241–45. http://dx.doi.org/10.1243/03093247v204241.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

KURIMURA, Akinobu, and Seiichi OHTAKI. "121 Experimental Analysis of Stress Intensity Factor of FRP." Proceedings of Conference of Hokkaido Branch 2000.40 (2000): 42–43. http://dx.doi.org/10.1299/jsmehokkaido.2000.40.42.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Pirner, Miros, and Ondrej Fischer. "Experimental analysis of aerodynamic stability of stress-ribbon footbridges." Wind and Structures 2, no. 2 (June 25, 1999): 95–104. http://dx.doi.org/10.12989/was.1999.2.2.095.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Saigh, Philip A. "An Experimental Analysis of Chronic Posttraumatic Stress Among Adolescents." Journal of Genetic Psychology 146, no. 1 (March 1985): 125–31. http://dx.doi.org/10.1080/00221325.1985.9923455.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Nogueira, Carnot L., and Kevin L. Rens. "Experimental analysis of cement-based materials under shear stress." Construction and Building Materials 170 (May 2018): 392–401. http://dx.doi.org/10.1016/j.conbuildmat.2018.03.050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Kang, Yilan, Qianjun Xu, and Shouwen Yu. "Experimental analysis for thermal stress in functionally gradient material." Chinese Science Bulletin 43, no. 10 (May 1998): 827–29. http://dx.doi.org/10.1007/bf03182746.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Kunčická, Lenka, Radim Halama, and Martin Fusek. "Special Issue: Selected Papers from Experimental Stress Analysis 2020." Materials 14, no. 5 (February 28, 2021): 1136. http://dx.doi.org/10.3390/ma14051136.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Waghmare, G. S., and R. R. Arakerimath. "Experimental and Finite Element Analysis of Single Dimple Sheet for Stress Analysis." International Review of Mechanical Engineering (IREME) 11, no. 10 (October 31, 2017): 730. http://dx.doi.org/10.15866/ireme.v11i10.13123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Zhang, Li, Min Quan Feng, and Xiao Bin Zhang. "Experimental Analysis of the Slip Phenomenon of Sewage Sludge." Advanced Materials Research 243-249 (May 2011): 41–44. http://dx.doi.org/10.4028/www.scientific.net/amr.243-249.41.

Full text

Abstract:

Wall slip of sweage sludge and affect slip possible factors were studied experimentally by using a rotational rheometer with parallel plate fixtures and by means high speed camera. In the steady shearing flow, the technique involves placing a straight line marker monitoring of wall slip,checking the gap dependence of the stress/ strain data. For sweage sludge of water content 80%, in the shearing flow it was found that, as the strain amplitude increasing, the stress data obtained at different gaps, then, at the certain strain amplitude, started to diverge, indicating that wall slip occurred. But for sweage sludge of water content 90%, these curves are superimpose, indicating no slip occurred. In the dynamic oscillatory shear flow, we analyze the total wave. While strain, stress amplitude decreases with the time, while strain, the stress amplitude remains constant.

APA, Harvard, Vancouver, ISO, and other styles

38

Djebli, A., A. Aid, M. Bendouba, A. Talha, N. Benseddiq, M. Benguediab, and S. Zengah. "Uniaxial Fatigue of HDPE-100 Pipe. Experimental Analysis." Engineering, Technology & Applied Science Research 4, no. 2 (April 17, 2014): 600–604. http://dx.doi.org/10.48084/etasr.422.

Full text

Abstract:

In this paper, an experimental analysis for determining the fatigue strength of PE-100, one of the most used High Density Polyethylene (HDPE) materials for pipes, under cyclic axial loadings is presented. HDPE is a thermoplastic material used for piping systems, such as natural gas distribution systems, sewer systems and cold water systems, which provides a good alternative to metals such as cast iron or carbon steel. One of the causes for failures of HDPE pipes is fatigue which is the result of pipes being subjected to cyclic loading, such as internal pressure, weight loads or external loadings on buried pipes, which generate stress in different directions: circumferential, longitudinal and radial. HDPE pipes are fabricated using an extrusion process, which generates anisotropic properties. By testing in the Laboratory a series of identical specimens obtained directly from PE-100 HDPE pipes in longitudinal directions, the relationships between amplitude stress and number of cycles (S-N curve) test frequency 2 Hz and stress ratio R = 0.0 are established.

APA, Harvard, Vancouver, ISO, and other styles

39

Lopez-Crespo, Pablo, Daniel Camas, Antonio González-Herrera, J. R. Yates, Eann A. Patterson, and Jose Zapatero. "Numerical and Experimental Analysis of Crack Closure." Key Engineering Materials 385-387 (July 2008): 369–72. http://dx.doi.org/10.4028/www.scientific.net/kem.385-387.369.

Full text

Abstract:

The fatigue life of metallic materials is strongly influenced by crack closure effects. Finite element (FE) methods allow the study of crack closure with great detail and can provide valuable information about phenomena occurring in the bulk of the material. In this work the distribution of stresses through the thickness of a cracked specimen has been studied using 3D FE simulations. It was found that the transition between the interior of the specimen (plane strain) and the surface (plane stress) differs from that predicted by 2D plane stress models. In addition, an attempt is presented to experimentally validate the results at the surface level. For this purpose full-field image correlation technique was utilized. This allowed direct comparison between the displacement field predicted by the numerical simulations and the experimental results measured by digital image correlation.

APA, Harvard, Vancouver, ISO, and other styles

40

Hajdarević, Seid, Murčo Obućina, Elmedin Mešić, and Sandra Martinović. "Stress and Strain Analysis of Plywood Seat Shell." Drvna industrija 70, no. 1 (March 26, 2019): 51–59. http://dx.doi.org/10.5552/drvind.2019.1825.

Full text

Abstract:

In this paper, the stress and strain analysis of common laminated wood seat shell is performed. Experimental stiffness evaluation is conducted by measuring displacement of the point on the backrest, and experimental stress analysis is carried out by tensometric measuring at the critical transition area from the seat to the backrest. Finite element analysis is carried out layer by layer with a “2D linear elastic model” for orthotropic materials. Good matching is found between numerical and experimental results of displacement. It is also shown that the results of the principal stress in the measurement points of the seat shell compare favourably with experimental data. The applied in-plane stress analysis of each individual veneer is not applicable for interlaminar stress calculations that are a significant factor in curved forms of laminated wood. Curved forms of laminated wood products require more complex numerical analysis, but the method can be used to achieve approximate data in early phase of product design.

APA, Harvard, Vancouver, ISO, and other styles

41

Astarita, Antonello, Luca Giorleo, Fabio Scherillo, Antonino Squillace, Elisabetta Ceretti, and Luigi Carrino. "Titanium Hot Stretch Forming: Experimental and Modeling Residual Stress Analysis." Key Engineering Materials 611-612 (May 2014): 149–61. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.149.

Full text

Abstract:

Titanium alloys, due to their high mechanical properties coupled with light weight and high corrosion resistance, are finding a widespread use in the aeronautic industry. The use of titanium in replacing the conventional alloys, such as aluminum alloys and steel, is reduced by both the high cost of the raw material (it costs anywhere from 3 to 10 times as much as steel or aluminium) and the machining costs (at least 10 times that to machine aluminium). For such a reason new technologies have been studied and developed. In particular many researchers are searching for technologies, such as the precision hot forming, that allows to obtain components with a low buy to fly ratio. Many of the airframe component structures are designed to fit against the inside radius of the fuselage curvature. By combining traditional stretch forming technology with hot titanium forming techniques, the HSF guarantees a saving in material and machining time, which are two serious cost issues for todays aircraft manufacturers. In addition, the process allows for consistent quality in a productively efficient manner, assuring the sustainable attainment of delivery and build schedules. In order to develop and improve the HSF process a modeling of the process itself was executed in order to study the stresses and strains undergone by the material among the deformation. The FEM model was validated through the residual stresses, and in particular the residual stresses provided by the model were compared with the ones experimentally measured using the hole drilling technique. Good agreement, in terms of stress range, was recorded both for the maximum and the minimum stress.

APA, Harvard, Vancouver, ISO, and other styles

42

Fujiyama, Masanao. "The Review on Experimental Stress and Strain Analysis. (Vol. 1)." Journal of the Japan Welding Society 61, no. 6 (1992): 478–84. http://dx.doi.org/10.2207/qjjws1943.61.6_478.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Fujiyama, Masanao. "The Review on Experimental Stress and Strain Analysis. (Vol. 2)." Journal of the Japan Welding Society 61, no. 7 (1992): 560–66. http://dx.doi.org/10.2207/qjjws1943.61.7_560.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Gavali, S. L., H. V. Vankudre, and K. N. Vijayakumar. "Numerical and Experimental Studies on Stress Analysis of Customized Implant." International Review of Mechanical Engineering (IREME) 11, no. 6 (June 30, 2017): 400. http://dx.doi.org/10.15866/ireme.v11i6.12848.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Maerky, C., J. L. Henshall, R. M. Hooper, and M. O. Guillou. "Cyclic contact fatigue of CaF2: Stress analysis and experimental results." Journal of the European Ceramic Society 17, no. 1 (January 1997): 61–70. http://dx.doi.org/10.1016/s0955-2219(96)00078-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Chen, Yu. "Experimental study and stress analysis of rock bolt anchorage performance." Journal of Rock Mechanics and Geotechnical Engineering 6, no. 5 (October 2014): 428–37. http://dx.doi.org/10.1016/j.jrmge.2014.06.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Van Raaij, M. T. M., and M. Oortgiesen. "Noise stress and airway toxicity: A prospect for experimental analysis." Food and Chemical Toxicology 34, no. 11-12 (November 1996): 1159–61. http://dx.doi.org/10.1016/s0278-6915(97)00089-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Buchmann, M., R. Gadow, and J. Tabellion. "Experimental and numerical residual stress analysis of layer coated composites." Materials Science and Engineering: A 288, no. 2 (September 2000): 154–59. http://dx.doi.org/10.1016/s0921-5093(00)00862-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

ALMALEH, Ahmad, Eitoku NAKANISHI, Yutaka SAWAKI, and kiyoshi ISOGIMI. "106 Application of Caustics Experimental Method to Thermal Stress Analysis." Proceedings of Conference of Tokai Branch 2002.51 (2002): 11–12. http://dx.doi.org/10.1299/jsmetokai.2002.51.11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Katake, Kaveri A., Sham H. Mankar, Sandip A. Kale, Prakash S. Dabeer, and Deshmukh S. J. "Numerical and Experimental Stress Analysis of a Composite Leaf Spring." International Journal of Engineering and Technology 8, no. 5 (October 31, 2016): 2098–104. http://dx.doi.org/10.21817/ijet/2016/v8i5/160805428.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!