Log in

Relevant bibliographies by topics / Explosive properties

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Explosive properties'

Author: Grafiati

Published: 4 June 2021

Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Explosive properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Explosive properties"

1

Liu, Lei, Yi Yang, Cheng Liang Zhang, and Guo Hua Wang. "Influence of Physical Sensitizing Agent on Compression Resistance of Deep Water of Emulsion Explosives." Applied Mechanics and Materials 295-298 (February 2013): 2869–73. http://dx.doi.org/10.4028/www.scientific.net/amm.295-298.2869.

Full text

Abstract:

A study of emulsion explosive of deep-water pressure performance can provide theoretical basis for underwater blasting, deep hole blasting and the design of emulsion explosive. The sensitizer is the heavier components of emulsion explosive, using reusable experimental device to simulate the environment of deep water charge, perlite and glass microspheres in two kinds of commonly used physical sensitizing agent content on properties of emulsion explosives with deep water pressure effect. The experimental results show that : with the increasing of the content of physical sensitizing agent, emuls

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Qing Tao, Jue Ding, Meng Kan Ying, and Bao Liang Zhang. "A Study on Damage Properties of Explosive Internal-Blast of Concrete." Advanced Materials Research 598 (November 2012): 420–24. http://dx.doi.org/10.4028/www.scientific.net/amr.598.420.

Full text

Abstract:

Blast can cause serious loss of people live and property，and heavy damage on building structures. So, a numerical study on internal-blast-field characteristics and dynamic response of concrete by aluminized explosive was conducted. Moreover, three energy release models of aluminized explosive with combustion effects were compared and analyzed. The numerical study shows that the ignition and growth model is one three-form equation of reaction rate, which can describe unsteady detonation process of non-ideal explosives well. So, in this paper, the energy release model of aluminized explosive bas

APA, Harvard, Vancouver, ISO, and other styles

3

Zlobin, B., V. Sil’Vestrov, A. Shtertser, A. Plastinin, and V. Kiselev. "Enhancement of Explosive Welding Possibilities by the Use of Emulsion Explosive/ Rozwój Mozliwości Łączenia Wybuchowego Przez Użycie Emulsji Wybuchowych." Archives of Metallurgy and Materials 59, no. 4 (2014): 1587–92. http://dx.doi.org/10.2478/amm-2014-0269.

Full text

Abstract:

Abstract Explosive welding is an effective method of joining of various metals and alloys. However, when the materials with very different strength and thermo-physical properties are welded or thin-layer cladding is performed, the difficulties occur which call for extra investigations. In the present paper, with the couples of steel / carbide composite and copper / hardened steel used as examples, under study were the peculiarities of bonding formation by the explosive welding of metals with highly differing properties. The experiments were carried out with emulsion explosive containing hollow

APA, Harvard, Vancouver, ISO, and other styles

4

Biegańska, Jolanta. "The Effect of the Reaction pH on Properties of Lead(II) Azide." Materials 14, no. 11 (2021): 2818. http://dx.doi.org/10.3390/ma14112818.

Full text

Abstract:

Lead(II) azide is an initiating explosive; even a small amount can trigger an explosion caused by simple external stimuli, such as sparks, flames, friction or pinpricks, and is able to initiate the explosive reaction of rock-crushing explosives. Due to the fact that this initiating explosive triggers further reactions, the effect of priming detonators depends on the properties of its material. Its sensitivity is associated with the size of its crystals. For instance, it is used for mining detonators in the form of fine crystals. The quality of the crystals is also correlated to the safety of t

APA, Harvard, Vancouver, ISO, and other styles

5

Itoh, S., Z. Liu, and Y. Nadamitsu. "An Investigation on the Properties of Underwater Shock Waves Generated in Underwater Explosions of High Explosives." Journal of Pressure Vessel Technology 119, no. 4 (1997): 498–502. http://dx.doi.org/10.1115/1.2842336.

Full text

Abstract:

A cylinder expansion test for high explosives was carried out to determine JWL parameters. Using the JWL parameters, we carried out numerical simulations of the underwater shock waves generated by the underwater explosion of the high explosives. Our results showed that the behavior of the underwater shock waves at the vicinity of the explosives differs greatly from that far from the explosives. Especially, the strength of the underwater shock wave nearby the explosive rapidly decreases due to the effect of the expansion of the gas products.

APA, Harvard, Vancouver, ISO, and other styles

6

Nykyforova, Valentyna, Ernest Yefremov, Ihor Kratkovskyi, and Volodymyr Kurinnyi. "Influence rocks mass and explosives properties on dissipative energy losses during blasting." E3S Web of Conferences 109 (2019): 00064. http://dx.doi.org/10.1051/e3sconf/201910900064.

Full text

Abstract:

The factors affecting the energy explosion loss on rock crushing on con-tact with explosives have been established. This makes it possible to substantiate ways to increase low explosion efficiency. Theoretical estimates of the explosion energy losses during the rocks destruction have been carried out taking into account the explosives properties and heterogeneities in the rocks structure. It has been established that homogeneities in the form of mineral grains of various strengths determine the mechanism of their destruction and crushing during blusting. A thermodynamic loss has been estimated

APA, Harvard, Vancouver, ISO, and other styles

7

Amir, Zh A., D. A. Bayseytov, S. E. Gizatova, Zh B. Kudyarova, and M. I. Tulepov. "Tests of Samples of Emulsion Explosive Senatel Magnum before and after Introduction of the Marking Composition for Explosive Properties and Safety Criteria." Occupational Safety in Industry, no. 6 (June 2021): 75–81. http://dx.doi.org/10.24000/0409-2961-2021-6-75-81.

Full text

Abstract:

The article is devoted to testing samples of the emulsion explosive Senatel Magnum before and after the introduction of the marking composition for explosive properties and safety criteria. It was established that the mixture of marking substances, which was introduced into the composition of the emulsion explosive Senatel Magnum, does not affect its explosive properties, as well as its safety in use during operation and conduct of blasting operations, since no inconsistencies were detected during tests by the specialists of explosive materials testing laboratory of the Expert Certification Ce

APA, Harvard, Vancouver, ISO, and other styles

8

Rao, Yun-zhang, Chang-shun Tian, Wei Xu, Chun-yu Xiao, Bo-yun Yuan, and Yao Yu. "Explosion Pressure and Minimum Explosible Concentration Properties of Metal Sulfide Ore Dust Clouds." Journal of Chemistry 2020 (January 30, 2020): 1–12. http://dx.doi.org/10.1155/2020/7980403.

Full text

Abstract:

The explosion pressure and minimum explosible concentration (MEC) properties of metal sulfide ore dust clouds are valuable for the prevention and control of metal sulfide ore dust explosions. In this study, a 20 L explosion sphere vessel was used to investigate the effect of sulfur content, particle size, and concentration on the explosion pressure and minimum explosible concentration of metal sulfide ore dust clouds. Four samples with different sulfur contents were selected (30%–40%, 20%–30%, 10%–20%, and 0%–10%). Before and after the explosion, samples were tested by X-ray diffraction. The r

APA, Harvard, Vancouver, ISO, and other styles

9

Kulivar, Viacheslav, Ihor Usyk, Nina Shepel, and Kostiantyn Kravchenko. "Features of initiating the light-sensitive explosive composites for safe blasting of borehole charges in coal mines." E3S Web of Conferences 123 (2019): 01009. http://dx.doi.org/10.1051/e3sconf/201912301009.

Full text

Abstract:

The purpose of paper is to study physical and chemical patterns for starting detonation in the explosive charges by means of laser pulse radiation. Studies of the physical and chemical properties of the mechanism for stimulating the detonation of explosives by pulse radiation of an optical quantum generator have been carried out. Methodology of experimental and theoretical studies as well as mathematical modeling, involving gas-dynamics equations, has been applied. Basic research results as for studying sensitivity of the explosives being initiated by pulse light radiation have been analyzed.

APA, Harvard, Vancouver, ISO, and other styles

10

Sinitsyn, Victor, Pavel Menshikov, and Vyacheslav Kutuev. "Estimation of Influence of Explosive Characteristics of Emulsion Explosives on Shotpile Width." E3S Web of Conferences 56 (2018): 01003. http://dx.doi.org/10.1051/e3sconf/20185601003.

Full text

Abstract:

The article deals with the question of the effect of explosive characteristics of emulsion explosives on the shotpile width. Currently, there are two main points of view to select an efficient type of explosive, which contributes to the qualitative destruction (fragmentation) of coarse clastic rocks. The first is based on the assumption that the detonation velocity of explosives must correspond to the break-down point of the rock (dynamic compression). Another point of view is that the detonation pressure of explosives determines only the head part of the pulse, on which the rock fragmentation

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Explosive properties"

1

Allum, J. "A Study of the behaviour of emulsion explosives." Thesis, Cranfield University, 2009. http://hdl.handle.net/1826/3976.

Full text

Abstract:

This study investigated the formulation and characterisation of emulsion explosives. This included the manufacture of more than 120kg of emulsion explosive of which around 105kg was used on the explosive ordnance range in over 350 individual firings. For each emulsion composition, an average of eight firings was undertaken with which to substantiate the explosive performance data. The formulation was varied to determine the effects of water content upon the physical characteristics of the emulsion. These physical effects included thermal conductivity, particle size, viscosity and the explosive

APA, Harvard, Vancouver, ISO, and other styles

2

Scholz, Philipp [Verfasser]. "Exploring statistical properties of nuclei for explosive stellar nucleosynthesis / Philipp Scholz." München : Verlag Dr. Hut, 2018. http://d-nb.info/1170473377/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lanza, Marcel Bahia. "Neuromechanics of maximum and explosive strength across knee-joint angles." Thesis, Loughborough University, 2018. https://dspace.lboro.ac.uk/2134/36229.

Full text

Abstract:

The primary purpose of this thesis was to assess the effect of knee-joint angle on the neuromechanics of maximal and explosive contractions, specifically torque and neuromuscular activation, as well as the influence of isometric resistance training (RT) on these variables and thus joint angle specificity of training adaptations. It was found that electrode location had a pronounced effect on surface electromyography (sEMG) amplitude during maximum isometric voluntary contractions (MVCs) and moderate relationship between subcutaneous tissue thickness and sEMG amplitude (R2=0.31 up to 0.38) was

APA, Harvard, Vancouver, ISO, and other styles

4

Tshilumbu, Nsenda Ngenda. "The effect of type and concentration of surfactant on stability and rheological properties of explosive emulsions." Thesis, [S.l. : s.n.], 2009. http://dk.cput.ac.za/cgi/viewcontent.cgi?article=1063&context=td_cput.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ciccarelli, Gaby. "Propagation of a vapor explosion through a linear array of tin droplets in water." Thesis, McGill University, 1988. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63964.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Davies, O. M. "Explosive decompression behaviour of elastomer seals and the influence of high pressure CO2 on their mechanical properties." Thesis, Swansea University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.636381.

Full text

Abstract:

A study has been completed investigating the elastomer seal failure phenomenon termed Explosive Decompression. In attempting to examine this phenomenon, a two pronged investigation strategy was initiated. The first of these was to develop a method for quantifying cavitation damage within elastomer materials as an attempt to differentiate the controlling parameters. The second strategy was to measure the effects on the mechanical properties caused by high pressure CO<SUB>2</SUB> swelling. These changes, if found to be significant, would have to be considered during any future developments of a

APA, Harvard, Vancouver, ISO, and other styles

7

Buckthorpe, Matthew. "Neural contributions to maximal muscle performance." Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/14772.

Full text

Abstract:

Neural activation is thought to be essential for the expression of maximal muscle performance, but the exact contribution of neural mechanisms such as the level of agonist, antagonist and stabiliser muscle activation to muscle strength is not fully understood. Explosive neuromuscular performance, including the ability to initiate (the electromechanical delay, EMD) and develop force rapidly (termed, rate of force development, RFD) are considered essential for the performance of explosive sporting tasks and joint stabilisation and thus injury avoidance. The thesis aimed to improve our understand

APA, Harvard, Vancouver, ISO, and other styles

8

Dionne, Jean-Philippe. "Chapman-Jouguet properties of heterogeneous explosives." Thesis, McGill University, 1996. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=24055.

Full text

Abstract:

The role of inert additives in the detonation characteristics of nitromethane-based heterogeneous explosives is investigated. Available experimental data on the detonation velocity are compared with theoretical CJ calculations using two different detonation codes (IDeX and Cheetah). IDeX uses the Theostar equation of state (EOS) for the fluid phase and the Murnaghan EOS for the solid phase while Cheetah uses the JCZ3-EOS for the fluid species and the OLD-EOS for the solid phase.<br>Large deviations are observed for heterogeneous explosives with a large mass fraction of inert material. This is

APA, Harvard, Vancouver, ISO, and other styles

9

Archer, Bernard. "Properties of concrete subjected to explosively generated impact and impulse loading." Thesis, University of Sheffield, 1986. http://etheses.whiterose.ac.uk/14620/.

Full text

Abstract:

The use of models to simulate full scale structural effects has long been attempted and various types of models have been developed. One type, the replica model, in which prototype materials are used was selected for this study. Much interest has been shown in the past on damage prediction based on extrapolation of the results from small explosive charge tests. In this study, scale model concrete ground slabs have been subjected to high rates of loading using explosively propelled copper and aluminium projectiles impacting on the concrete to air surface and explosive devices buried in the soil

APA, Harvard, Vancouver, ISO, and other styles

10

Wooldridge, Robyn Elaine. "The effects of explosives on the physical properties of snow." Thesis, Montana State University, 2013. http://etd.lib.montana.edu/etd/2013/wooldridge/WooldridgeR0513.pdf.

Full text

Abstract:

Explosives are a critically important component of avalanche control programs. They are used to both initiate avalanches and to test snowpack instability by ski areas, highway departments and other avalanche programs around the world. Current understanding of the effects of explosives on snow is mainly limited to shock wave behavior demonstrated through stress wave velocities, pressures and attenuation. This study seeks to enhance current knowledge of how explosives physically alter snow by providing data from field-based observations and analyses that quantify the effect of explosives on snow

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Explosive properties"

1

Janssen, Thomas J. Explosive materials: Classification, composition, and properties. Nova Science Publishers, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mader, Charles L. Numerical modeling of the effect of particle size of explosives on shock initiation properties. Los Alamos National Laboratory, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Glor, Martin. Electrostatic hazards in powder handling. Research Studies Press, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sax, N. Irving. Dangerous properties of industrial materials. 7th ed. Van Nostrand Reinhold, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sax, N. Irving. Dangerous properties of industrial materials. 7th ed. Van Nostrand Reinhold, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sax, N. Irving. Dangerous properties of industrial materials. 7th ed. Van Nostrand Reinhold, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Boddu, Veera. Energetic materials: Thermophysical properties, predictions, and experimental measurements. CRC Press, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

American Institute of Chemical Engineers. Energetic Materials Group, ed. Energetic materials: Thermophysical properties, predictions, and experimental measurements. CRC Press, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

International Symposium on Explosion, Shock Wave and Hypervelocity Phenomena (2nd 2007 Kumamoto, Japan). Explosion, shock wave and hypervelocity phenomena in materials II: Selected peer reviewed papers from the 2nd International Symposium on Explosion, Shock Wave and Hypervelocity Phenomena (ESHP-2), 6-9 March 2007, Kumamoto, Japan. Trans Tech Publications, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ghosh, Tushar K., Dabir S. Viswanath, and Veera M. Boddu. Emerging Energetic Materials: Synthesis, Physicochemical, and Detonation Properties. Springer, 2018.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Explosive properties"

1

Matyáš, Robert, and Jiří Pachman. "Explosive Properties of Primary Explosives." In Primary Explosives. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28436-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Blazynski, T. Z. "Explosive Welding Operations." In Dynamically Consolidated Composites: Manufacture and Properties. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2892-6_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Murr, Lawrence E. "Explosive Welding, Forming, and Powder Consolidation." In Handbook of Materials Structures, Properties, Processing and Performance. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-01815-7_50.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Murr, Lawrence E. "Explosive Welding, Forming, and Powder Consolidation." In Handbook of Materials Structures, Properties, Processing and Performance. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-01905-5_50-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Garwin, Richard L. "Explosive Properties of Various Types of Plutonium." In Managing the Plutonium Surplus: Applications and Technical Options. Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-0996-3_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jones, Peter G. E. F. "Explosive Properties of Various Types of Plutonium." In Managing the Plutonium Surplus: Applications and Technical Options. Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-0996-3_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Desai, Hemant J., Richard Lacey, Daniel O. Acheampong, et al. "Syntheses of ‘Hemtex’ Simulants of Energetic Materials and Millimetre Wave Characterisation Using the Teraview CW400 Spectrometer: Fundamental Studies for Detection Applications." In Security Informatics and Law Enforcement. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69460-9_11.

Full text

Abstract:

AbstractExplosives or energetic materials are hazardous, expensive and difficult to handle safely. As such there is a need for simulant explosive materials in order to conduct work without these issues being present. This chapter describes characterisation of a set of simulant materials with respect to millimetre wave and submillimetre wave threat detection technologies. The properties examined were the real and imaginary parts of the relative permittivity. The simulants are based on a modular approach to design appropriate chemical and physical properties which mimic explosives. Collectively, these materials are referred to as Hemtex and can be tailored to match various requirements. The subset of Hemtex materials used in this study were designed to reflect the properties of Semtex and the results of the characterisation showed promise for use as Semtex substitutes.

APA, Harvard, Vancouver, ISO, and other styles

8

Goldrein, H. T., P. J. Rae, S. J. P. Palmer, and A. L. Lewis. "Ageing Effects on the Mechanical Properties of a Polymer Bonded Explosive." In Ageing Studies and Lifetime Extension of Materials. Springer US, 2001. http://dx.doi.org/10.1007/978-1-4615-1215-8_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Thiéry, Régis, Sébastien Loock, and Lionel Mercury. "Explosive Properties of Superheated Aqueous Solutions in Volcanic and Hydrothermal Systems." In Metastable Systems under Pressure. Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-3408-3_21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Vasylkiv, Oleg, Yoshio Sakka, and Valeriy Skorokhod. "Synthesis and Properties of Multimetal Oxide Nanopowders via Nano-Explosive Technique." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.125.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Explosive properties"

1

Costain, Andrew, and Javid Bayandor. "On Topology Dependence of Explosive Shock Properties." In ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/fedsm2014-22046.

Full text

Abstract:

When explosive material is ignited, a detonation wave is generated causing a chemical reaction to take place. This chemical reaction results in the creation of a shockwave in the air surrounding the explosive material. The properties of this shockwave are dependent upon many different variables including but not limited to the type of explosive material used, the amount of material used, the surrounding fluid and the distance that the shockwave travels from the point of ignition. One variable that is not often considered is how the topology of the explosive material may affect the properties o

APA, Harvard, Vancouver, ISO, and other styles

2

Matsumoto, S., and S. Itoh. "Shock Analysis of Underwater Explosion Using Smoothed Particle Hydrodynamics." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-2864.

Full text

Abstract:

A blasting process includes large deformations and inhomogeneities caused by shock waves as well as the detonation gases generated by explosives. Smoothed Particle Hydrodynamics (SPH) is a meshless and complete Lagrangian method. The properties of SPH method can overcome the difficulty of a simulation in a blasting process. In this study, the simulation of an underwater explosion using SEP (Safety Explosives) as a cylindrical high explosive is carried out to confirm the advantage of SPH method for the analysis in a blasting process. The Euler equations are used for the governing equations of b

APA, Harvard, Vancouver, ISO, and other styles

3

Ge, Lei, Yantao Wang, Huipeng Hu, Lijun Li, and Yiben Zhang. "Numerical Study on Explosion Cutting Process of PMMA Plate and Key Factors Influence on Cutting Performance." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-86793.

Full text

Abstract:

Polymethylmethacrylate (PMMA) has been widely utilized to manufacture the covers of aircraft cockpits, naval vessels, car windows and so on, due to their high transmittance, low density, easy processing formability, high corrosion resistance and excellent mechanical properties. Under special conditions such as ejection lifesaving, the PMMA plate needs to be split precisely by explosion cutting technology. Hence, an accurate numerical simulation of PMMA structures is significantly important in engineering application. This paper aims to study the cutting behavior of PMMA plate numerically and i

APA, Harvard, Vancouver, ISO, and other styles

4

Neyer, Barry, Robert Tomasoski, Lloyd Cox, and Terry Stoutenborough. "HNS-IV Explosive Properties and Characterization Tests." In 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-5138.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zakaria, Mohd Syafiq, Ahmad Humaizi Hilmi, and Asna Rasyidah Abdul Hamid. "Review of mechanical properties: Materials being subjected by explosive compaction and explosive welding." In PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS ENGINEERING & TECHNOLOGY (ICAMET 2020). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0053697.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zakaria, Mohd Syafiq, Ahmad Humaizi Hilmi, and Asna Rasyidah Abdul Hamid. "Review of mechanical properties: Materials being subjected by explosive compaction and explosive welding." In PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS ENGINEERING & TECHNOLOGY (ICAMET 2020). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0051931.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mereghetti, S. "An introduction to the properties of Magnetars." In THE MULTICOLORED LANDSCAPE OF COMPACT OBJECTS AND THEIR EXPLOSIVE ORIGINS. American Institute of Physics, 2007. http://dx.doi.org/10.1063/1.2774853.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

McDougall, Michael O., Stephen Kelty, and Jose Lopez. "Computer Simulations For Modelling Explosive Properties Of Ball Lightning." In 2017 IEEE International Conference on Plasma Science (ICOPS). IEEE, 2017. http://dx.doi.org/10.1109/plasma.2017.8496111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wilson, W. H., J. W. Forbes, P. K. Gustavson, E. R. Lemar, and G. T. Sutherland. "Detonation properties of the non-ideal explosive PBXW-123." In Proceedings of the conference of the American Physical Society topical group on shock compression of condensed matter. AIP, 1996. http://dx.doi.org/10.1063/1.50606.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

de Martino, D. "X‐ray properties of new magnetic Cataclysmic Variables." In THE MULTICOLORED LANDSCAPE OF COMPACT OBJECTS AND THEIR EXPLOSIVE ORIGINS. American Institute of Physics, 2007. http://dx.doi.org/10.1063/1.2774905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Explosive properties"

1

Wilson, William S., Dan E. Bliss, Stephen L. Christian, and David J. Knight. Explosive Properties of Polynitroaromatics. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada229627.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yee, Rena Y., and E. C. Martin. Effects of Surface Interactions and Mechanical Properties of Plastic Bonded Explosives on Explosive Sensitivity. Part 2. Model Formulation. Defense Technical Information Center, 1985. http://dx.doi.org/10.21236/ada157900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Parmeter, John, Lori Montano-Martinez, James Barnett, Philip Rodacy, and Colin Pollard. Measurements of the Dielectric Properties of Thin High-Explosive Samples Using a. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1762981.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Billingsley, James P. Impact Shock Sensitivity of a TATB Based Explosive Relevant to Specific Heat Properties. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada444627.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Schmidt, R. D., G. S. Lee, P. F. Pagoria, A. R. Mitchell, and R. Gilardi. Synthesis and Properties of a New Explosive, 4-Amino-3,5-Dinitro-lH-Pyrazole (LLM-116). Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/15005359.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hooks, Daniel E., John D. Yeager, and Kyle J. Ramos. Constituent properties, process, and formulation effects contributing to functional characteristics in pharmaceutical and explosive composites. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1083097.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Dick, R. D., and W. L. Fourney. Effects of rock properties on explosive source modeling: Preliminary results. Los Alamos Source Region Project. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10182188.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Myers, L. C. Thermal properties of explosives. Quarterly report, April--June 1964. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/525062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wilson, A. L., and H. D. Johnson. Mechanical properties of explosives. Quarterly report, October--December 1971. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/531121.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Tasker, Douglas G. The Properties of Condensed Explosives for Electromagnetic Energy Coupling,. Defense Technical Information Center, 1985. http://dx.doi.org/10.21236/ada177885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!