Log in

Relevant bibliographies by topics / Fabry-Perot sensor

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Fabry-Perot sensor'

Author: Grafiati

Published: 4 June 2021

Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fabry-Perot sensor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Fabry-Perot sensor"

1

Padron, Ivan, Anthony T. Fiory, and Nuggehalli M. Ravindra. "Novel MEMS Fabry-Perot Interferometric Pressure Sensors." Materials Science Forum 638-642 (January 2010): 1009–14. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.1009.

Full text

Abstract:

A novel design for a Fabry-Perot Interferometric Sensor (FPIS) consisting of a Fabry-Perot cavity formed between two bonded surfaces is discussed. The Fabry-Perot cavity and the optical fiber to which it is coupled are used as the sensing element and interconnect, respectively. The Fabry-Perot cavity is fabricated using the Micro Electro Mechanical Systems (MEMS) technology. The introduction of a center rigid body diaphragm gives this sensor considerable advantage when compared with previous Fabry-Perot cavity based sensors.

APA, Harvard, Vancouver, ISO, and other styles

2

Zhang, Xiongxing, Wei Wang, Haibin Chen, Ying Tang, Zhibo Ma, and Kening Wang. "Two-Parameter Elliptical Fitting Method for Short-Cavity Fiber Fabry–Perot Sensor Interrogation." Sensors 19, no. 1 (2018): 36. http://dx.doi.org/10.3390/s19010036.

Full text

Abstract:

To solve the cavity interrogation problem of short cavity fiber Fabry–Perot sensors in white light spectral interrogation with amplified spontaneous emissions (ASEs) as the white light sources, a data processing method, using an improved elliptical fitting equation with only two undetermined coefficients, is proposed. Based on the method, the cavity length of a fiber Fabry–Perot sensor without a complete reflection spectrum period in the frequency domain can be interrogated with relatively high resolution. Extrinsic fiber Fabry–Perot air-gap sensors with cavity lengths less than 30 μm are used

APA, Harvard, Vancouver, ISO, and other styles

3

Ma, Cheng, Evan M. Lally, and Anbo Wang. "Toward Eliminating Signal Demodulation Jumps in Optical Fiber Intrinsic Fabry–Perot Interferometric Sensors." Journal of Lightwave Technology 29, no. 13 (2011): 1913–19. http://dx.doi.org/10.1109/jlt.2011.2144957.

Full text

Abstract:

Fiber optic Fabry-Perot sensors are commonly interrogated by spectral interferometric measurement of optical path difference (OPD). Spurious jumps in sensor output, previously attributed to noise, are often observed in OPD-based measurements. Through analysis and experimentation based on intrinsic Fabry-Perot interferometric (IFPI) sensors, we show that these discontinuities are actually caused by a time-varying interferogram phase term. We identify several physical causes for varying initial phase and derive a threshold value at which it begins to cause errors in the sensor output. Finally, w

APA, Harvard, Vancouver, ISO, and other styles

4

Budinski, Vedran, and Denis Donlagic. "Miniature Twist/Rotation Fabry Perot Sensor Based on a Four-Core Fiber." Proceedings 2, no. 13 (2018): 1091. http://dx.doi.org/10.3390/proceedings2131091.

Full text

Abstract:

This paper presents a miniature Fabry Perot twist/rotation sensor. The presented sensor consists of a single lead-in multicore fiber, which has four eccentrically positioned cores, a special asymmetrical microstructure, similar to a truncated cylinder, and an inline semi reflective mirror, all packed in a glass capillary housing. The perpendicular cut lead-in multicore fiber and the inline semi reflective mirror form four Fabry-Perot cavities. The optical path length of each Fabry-Perot interferometer is defined by the distance between mirrors, refractive index and twist/rotation angle of the

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, Yung Cheng, Lih Horng Shyu, Wen Yuh Jywe, and Bean Yin Lee. "Compensation of Tilt Angles and Verification of Displacement Measurements with a Fabry-Perot Interferometer." Key Engineering Materials 437 (May 2010): 95–97. http://dx.doi.org/10.4028/www.scientific.net/kem.437.95.

Full text

Abstract:

The construction of Fabry-Perot interferometer is very simple and it has been already utilized in different measurement systems. The result of displacement measurement is obviously influenced by the tilt angles of measurement mirror, if a Fabry-Perot interferometer is utilized for displacement measurement. Hence, the measuring range of current systems is rather small (less than 1 mm). The goal of this investigation is to develop a Fabry-Perot interferometer for large travelling range (till 60 mm) by aid of compensation of tilt angles with an angular sensor, piezo translators, control mechanism

APA, Harvard, Vancouver, ISO, and other styles

6

Feng, Fei, Pinggang Jia, Jiang Qian, Zhengpeng Hu, Guowen An, and Li Qin. "High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment." Micromachines 12, no. 6 (2021): 623. http://dx.doi.org/10.3390/mi12060623.

Full text

Abstract:

This paper proposes a high-temperature optical fiber Fabry–Perot pressure sensor based on the micro-electro-mechanical system (MEMS). The sensing structure of the sensor is composed of Pyrex glass wafer and silicon wafer manufactured by mass micromachining through anodic bonding process. The separated sensing head and the gold-plated fiber are welded together by a carbon dioxide laser to form a fiber-optic Fabry–Perot high temperature pressure sensor, which uses a four-layer bonding technology to improve the sealing performance of the Fabry–Perot cavity. The test system of high temperature pre

APA, Harvard, Vancouver, ISO, and other styles

7

Chin, Ken K., Yan Sun, Guanhua Feng, et al. "Fabry-Perot diaphragm fiber-optic sensor." Applied Optics 46, no. 31 (2007): 7614. http://dx.doi.org/10.1364/ao.46.007614.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Fang, J. X., H. F. Taylor, and H. S. Choi. "Fiber-optic Fabry-Perot flow sensor." Microwave and Optical Technology Letters 18, no. 3 (1998): 209–11. http://dx.doi.org/10.1002/(sici)1098-2760(19980620)18:3<209::aid-mop14>3.0.co;2-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lee, C. E., A. M. Markus, E. Udd, and H. F. Taylor. "Optical-fiber Fabry–Perot embedded sensor." Optics Letters 14, no. 21 (1989): 1225. http://dx.doi.org/10.1364/ol.14.001225.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Cheng, Jin, Yu Zhou, and Xiaoping Zou. "Fabry–Perot Cavity Sensing Probe with High Thermal Stability for an Acoustic Sensor by Structure Compensation." Sensors 18, no. 10 (2018): 3393. http://dx.doi.org/10.3390/s18103393.

Full text

Abstract:

Fiber Fabry–Perot cavity sensing probes with high thermal stability for dynamic signal detection which are based on a new method of structure compensation by a proposed thermal expansion model, are presented here. The model reveals that the change of static cavity length with temperature only depends on the thermal expansion coefficient of the materials and the structure parameters. So, fiber Fabry–Perot cavity sensing probes with inherent temperature insensitivity can be obtained by structure compensation. To verify the method, detailed experiments were carried out. The experimental results r

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Fabry-Perot sensor"

1

Zeakes, Jason S. "Extrinsic Fabry-Perot Interferometric hydrogen gas sensor." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06162009-063525/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Xie, Zhaoxia. "Two applications of the Fabry-Perot interferometric sensor." [College Station, Tex. : Texas A&M University, 2006. http://hdl.handle.net/1969.1/ETD-TAMU-1019.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ivanov, Georgi Pavlov. "Fabry-Perot Sapphire Temperature Sensor for Use in Coal Gasification." Thesis, Virginia Tech, 2011. http://hdl.handle.net/10919/32931.

Full text

Abstract:

Sapphire fiber based temperature sensors are exceptional in their ability to operate at temperatures above 1000ÂºC and as high as 1800ÂºC. Sapphire fiber technology is emerging and the fiber is available commercially. Sapphire fiber has a high loss, is highly multi-mode and does not have a solid cladding, but it is nonetheless very useful in high temperature applications. Of the available interferometer configurations, Fabry-Perot interferometers are distinguished in their high accuracy and great isolation from sources of error. In this thesis, improvements are reported to an existing design

APA, Harvard, Vancouver, ISO, and other styles

4

Zhao, Xin. "Study of Multimode Extrinsic Fabry-Perot Interferometric Fiber Optic Sensor on Biosensing." Thesis, Virginia Tech, 2006. http://hdl.handle.net/10919/34534.

Full text

Abstract:

The electrostatic self-assembly (ESA) method presents an effective application in the field of biosensing due to the uniform nanoscale structure. In previous research, a single mode fiber (SMF) sensor system had been investigated for the thin-film measurement due to the high fringe visibility. However, compared with a SMF sensor system, a multimode fiber (MMF) sensor system is lower-cost and has larger sensing area (the fiber core), providing the potential for higher sensing efficiency. <p> In this thesis, a multimode fiber-optic sensor has been developed based on extrinsic Fabry-Perot in

APA, Harvard, Vancouver, ISO, and other styles

5

Lee, Kyung-Woo. "Fiber Fabry-Perot interferometer (FFPI) sensor using vertical cavity surface emitting laser (VCSEL)." Diss., Texas A&M University, 2005. http://hdl.handle.net/1969.1/4221.

Full text

Abstract:

This research represents the first effort to apply vertical cavity surface emitting lasers (VCSELs) to the monitoring of interferometric fiber optic sensors. Modulation of the drive current causes thermal tuning of the laser light frequency. Reflection of this frequency-modulated light from a fiber Fabry-Perot interferometer (FFPI) sensor produces fringe patterns which can be used to measure the optical path difference of the sensor. Spectral characteristics were measured for 850nm VCSELs to determine the combination of dc bias current, modulation current amplitude and modulation frequency for

APA, Harvard, Vancouver, ISO, and other styles

6

Huang, Zhengyu. "Quasi-Distributed Intrinsic Fabry-Perot Interferometric Fiber Sensor for Temperature and Strain Sensing." Diss., Virginia Tech, 2006. http://hdl.handle.net/10919/26247.

Full text

Abstract:

The motivation of this research is to meet the growing demand for the measurand high-resolution, high-spatial resolution, attenuation insensitive and low-cost quasi-distributed temperature and strain sensors that can reliably work under harsh environment or in extended structures. There are two main drives for distributed fiber sensor research. The first is to lower cost-per-sensor so that the fiber sensors may become price-competitive against electrical sensors in order to gain widespread acceptance. The second is to obtain spatial distribution of the measurand. This dissertation presents det

APA, Harvard, Vancouver, ISO, and other styles

7

Wang, Xingwei. "Optical Fiber Tip Pressure Sensor." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/35490.

Full text

Abstract:

<p> Miniature pressure sensors which can endure harsh environments are a highly sought after goal in industrial, medical and research fields. Microelectromechanical systems (MEMS) are the current methods to fabricate such small sensors. However, they suffer from low sensitivity and poor mechanical properties. </p><p> To fulfill the need for robust and reliable miniature pressure sensors that can operate under high temperatures, a novel type of optical fiber tip sensor only 125Î¼m in diameter is presented in this thesis. The essential element is a piece of hollow fiber which connects the fiber

APA, Harvard, Vancouver, ISO, and other styles

8

Oh, Ki Dong. "Optical Fiber Fabry-Perot Interferometer based Sensor Instrumentation System for Low Magnetic Field Measurement." Diss., Virginia Tech, 1997. http://hdl.handle.net/10919/29687.

Full text

Abstract:

This dissertation proposes a miniaturized optical fiber based sensor system for the measurement of 3-dimensional vector magnetic fields. The operation of the sensor system is based on the detection of magnetostrictive dimensional changes in the sensor gage using a modified extrinsic Fabry-Perot Interferometer configuration. Because of the magnetostrictive reflector the gap length depends on the magnetic fields applied to the sensor. Since the diameter of the magnetostrictive sensor gage is 125 micrometer which is the same as that of the input/output fiber, the sensor is simply constructed b

APA, Harvard, Vancouver, ISO, and other styles

9

Abeysinghe, Don Chandana. "Novel MEMS Pressure and Temperature Sensors Fabricated on Optical Fibers." University of Cincinnati / OhioLINK, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=ucin997987327.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wavering, Thomas A. "Optical Path Length Multiplexing of Optical Fiber Sensors." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36037.

Full text

Abstract:

Optical fiber sensor multiplexing reduces cost per sensor by designing a system that minimizes the expensive system components (sources, spectrometers, etc.) needed for a set number of sensors. The market for multiplexed optical sensors is growing as fiberoptic sensors are finding application in automated factories, mines, offshore platforms, air, sea, land, and space vehicles, energy distribution systems, medical patient surveillance systems, etc. Optical path length multiplexing (OPLM) is a modification to traditional white-light interferometry techniques to multiplex extrinsic Fabry-Perot i

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Fabry-Perot sensor"

1

Janzen, Douglas D. A pseudo-heterodyne demodulation system for remote fiber-optic strain sensors. University of Toronto, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Zuliani, Gary Louis. Demodulation of a fiber Fabry-Perot strain rosette using white light interferometry. University of Toronto, Graduate Dept. of Aerospace Science and Engineering, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Schindler, Paul. Optical fiber sensors for damage analysis in aerospace materials: Final report. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

L, Tuma Margaret, and United States. National Aeronautics and Space Administration., eds. Fabry-Perot fiber-optic temperature sensor system. National Aeronautics and Space Administration, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

L, Tuma Margaret, and United States. National Aeronautics and Space Administration., eds. Fabry-Perot fiber-optic temperature sensor system. National Aeronautics and Space Administration, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

L, Tuma Margaret, and United States. National Aeronautics and Space Administration., eds. Fabry-Perot fiber-optic temperature sensor system. National Aeronautics and Space Administration, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fiber-optic temperature sensor using a thin-film Fabry-Perot interferometer. Dept. of Electrical Engineering and Applied Physics, Case Western Reserve University, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

United States. National Aeronautics and Space Administration., ed. Fiber-optic temperature sensor using a thin-film Fabry-Perot interferometer. Dept. of Electrical Engineering and Applied Physics, Case Western Reserve University, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

United States. National Aeronautics and Space Administration., ed. Fiber-optic temperature sensor using a thin-film Fabry-Perot interferometer. Dept. of Electrical Engineering and Applied Physics, Case Western Reserve University, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fiber-optic temperature sensor using a thin-film Fabry-Perot interferometer. Dept. of Electrical Engineering and Applied Physics, Case Western Reserve University, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Fabry-Perot sensor"

1

Claus, R. O., M. F. Gunther, A. B. Wang, K. A. Murphy, and D. Sun. "Extrinsic Fabry-Perot Sensor for Structural Evaluation." In Applications of Fiber Optic Sensors in Engineering Mechanics. American Society of Civil Engineers, 1993. http://dx.doi.org/10.1061/9780872628953.ch04.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Hui, Qingchao Zhao, Jiasheng Ni, Long Ma, Faxiang Zhang, and Chang Wang. "Fabry-Perot Cavity-Based Optical Fiber Pressure Sensor." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8595-7_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Zhenyu, Li, Shao Jie, Wu Zhizong, and Chen Jianyong. "Micro Machined Diaphragm Based Fiber Fabry-Perot Acoustic Sensor." In Informatics in Control, Automation and Robotics. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25899-2_64.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Paulicka, I., V. Sochor, and J. Stulpa. "Fibre-Optic Fabry-Perot Sensor for Vibration and Profile Measurements." In Trends in Optical Fibre Metrology and Standards. Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0035-9_58.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

George, H., U. Hollenbach, J. Söchtig, and W. Sohler. "Sensor Applications of Low Finesse Integrated Optical Fabry-Perot Resonators." In Springer Series in Optical Sciences. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-540-39452-5_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Maystre, F., and A. Bertholds. "Magneto-optic Current Sensor Using a Helical Fiber Fabry-Perot Resonator." In Springer Proceedings in Physics. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-75088-5_41.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Murphy, K. A., C. E. Koob, A. J. Plante, M. F. Gunther, A. M. Vengsarkar, and R. O. Claus. "High Temperature Fabry-Perot Based Strain Sensor for Ceramic Cross Flow Filters." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3344-3_145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Su, Hao, Michael Zervas, Cosme Furlong, and Gregory S. Fischer. "A Miniature MRI-Compatible Fiber-optic Force Sensor Utilizing Fabry-Perot Interferometer." In MEMS and Nanotechnology, Volume 4. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0210-7_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bai, X. H., M. L. Hu, T. T. Gang, J. Wang, and L. G. Dong. "An optical fiber ultrasonic sensor based on cascaded Fiber Bragg Grating Fabry-Perot probe." In Frontier Research and Innovation in Optoelectronics Technology and Industry. CRC Press, 2018. http://dx.doi.org/10.1201/9780429447082-36.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Song, Ningfang, Yujie Yang, Ying Chen, and Jingming Song. "Fiber-Optic Extrinsic Fabry–Perot Interferometer Pressure Sensor Demodulation System with Three Quadrature Signals." In Proceedings of the Second International Conference on Mechatronics and Automatic Control. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-13707-0_121.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Fabry-Perot sensor"

1

Manjunath, Vinay Kanive, and Anisur Rahman. "MEMS Based Fabry-Perot Sensor for Measuring Flow Velocity." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39375.

Full text

Abstract:

New MEMS based Fabry–Perot sensor has been proposed to measure the flow of a fluid.. The flow velocity will cause the oscillatory strain on the optical waveguide which will be detected by the Fabry-Perot Interferometer principle. The velocity of flow is found to be varied with the frequency induced by the vortex shedding of the fluid flow.

APA, Harvard, Vancouver, ISO, and other styles

2

James, Kenneth A., and William H. Quick. "Fiber-optic Fabry-Perot temperature sensor." In Optical Fiber Sensors. OSA, 1985. http://dx.doi.org/10.1364/ofs.1985.thgg3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Murphy, Kent A., Michael F. Gunther, Anbo Wang, Richard O. Claus, and Ashish M. Vengsarkar. "Extrinsic Fabry-Perot Optical Fiber Sensor." In Optical Fiber Sensors. OSA, 1992. http://dx.doi.org/10.1364/ofs.1992.p30.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Uribe, Beatriz Argumedo, Violeta A. Márquez Cruz, and Juan Hernández-Cordero. "Polymer Microbubble Fabry-Perot Temperature Sensor." In Latin America Optics and Photonics Conference. OSA, 2012. http://dx.doi.org/10.1364/laop.2012.ls3b.5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Janssens, Stefaan, Adam Swanson, and Sebastiampillai Raymond. "Polyimide coated Fabry-Perot humidity sensor." In 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2019. http://dx.doi.org/10.1109/i2mtc.2019.8826834.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kale, Pramodini A., S. G. Hate, and Nitin Kawade. "Fabry Perot Etalon Based Wavelength Sensor." In 2014 International Conference on Electronic Systems, Signal Processing and Computing Technologies (ICESC). IEEE, 2014. http://dx.doi.org/10.1109/icesc.2014.25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Cibula, Edvard, and Denis Donlagic. "All-fiber Fabry-Perot strain sensor." In Second European Workshop on Optical Fibre Sensors. SPIE, 2004. http://dx.doi.org/10.1117/12.566620.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Rao, Y. J., and M. Deng. "PCF-based Fabry-Perot refractive-index sensor." In Advanced Sensor Systems and Applications III. SPIE, 2008. http://dx.doi.org/10.1117/12.756299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Testa, Genni, Gianluca Persichetti, and Romeo Bernini. "Polymer-based Fabry Perot refractive index sensor." In Optical Sensors 2021, edited by Robert A. Lieberman, Francesco Baldini, and Jiri Homola. SPIE, 2021. http://dx.doi.org/10.1117/12.2589979.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Choi, Hae Young, Kwan Seob Park, Young Ho Kim, and Byeong Ha Lee. "Dual-cavity fiber Fabry-Perot interferometric sensor." In 2009 14th OptoElectronics and Communications Conference (OECC). IEEE, 2009. http://dx.doi.org/10.1109/oecc.2009.5218331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Fabry-Perot sensor"

1

Lee, S. B., C. M. Yu, D. R. Ciarlo, and S. K. Sheem. Micromachined Fabry-Perot interferometric pressure sensor for automotive combustion engine. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/212541.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!