Log in

Relevant bibliographies by topics / Face packing seal / Journal articles

To see the other types of publications on this topic, follow the link: Face packing seal.

Journal articles on the topic 'Face packing seal'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 26 journal articles for your research on the topic 'Face packing seal.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Shevchenko, Serhii S. "Physical Model and Calculation of Face Packing Seals." Journal of Mechanical Engineering 23, no. 4 (2020): 45–51. http://dx.doi.org/10.15407/pmach2020.04.045.

Full text

Abstract:

Increasing the reliability and service life of dynamic-pump shaft seals is the most important requirement for their creation. The most common type of seals is still traditional stuffing box seals, which are controlled leakage assemblies that are periodically restored during operation. A radical change in the design of standard stuffing box seals is the transition to face packing seals with a constant pressure against the packing. It is shown that face packing seals can successfully combine the advantages of mechanical face seals and the simplicity and relatively low cost of traditional stuffin

APA, Harvard, Vancouver, ISO, and other styles

2

Gudkov, Sergii, Volodymyr Martsynkovskyy, and Czeslaw Kundera. "An Analysis of Axial Vibration in Face Packing Seals." Solid State Phenomena 248 (March 2016): 142–51. http://dx.doi.org/10.4028/www.scientific.net/ssp.248.142.

Full text

Abstract:

This paper deals with the dynamics of face packing seals, in which one of the sealing rings is made of elastic sealant. The study involved analyzing the axial vibration of the flexible ring for two configurations of its housing in the seal and determining the frequency characteristics and the condition of maintaining face-to-face contact between the sealing rings with considerably different elastic properties subjected to two types of external excitations. The derived analytical relationships were verified using a calculation example for real operating conditions of face packing seals in two p

APA, Harvard, Vancouver, ISO, and other styles

3

Martsynkowskyy, Volodymyr, Czeslaw Kundera, and Sergii Gudkov. "Selected Dynamic Problems of the Face Packing Seal." Procedia Engineering 136 (2016): 150–56. http://dx.doi.org/10.1016/j.proeng.2016.01.189.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kirk, R. Gordon. "A Method for Calculating Labyrinth Seal Inlet Swirl Velocity." Journal of Vibration and Acoustics 112, no. 3 (1990): 380–83. http://dx.doi.org/10.1115/1.2930519.

Full text

Abstract:

The results of numerous investigators have shown the importance of inlet swirl on the calculated dynamic stiffness and stability of labyrinth seals. These results have not included any calculation of inlet leakage of swirl as a function of complex disk geometry including the sealing conditions of the given seal. This paper outlines a method of calculating the inlet swirl at the entrance of the labyrinth seal by introducing a radial chamber which when added to the axial flow solution allows the prediction of the gas swirl as it flows radially from the stage tip along the disk face inward to the

APA, Harvard, Vancouver, ISO, and other styles

5

Sapozhnykov, Y., A. Zahorulko, and G. Peczkis. "Numerical Simulation of 2-Way FSI Problem of Face Packing Seal: Impact of Parameters Change." Journal of Engineering Sciences 9, no. 2 (2022): E12—E27. http://dx.doi.org/10.21272/jes.2022.9(2).e3.

Full text

Abstract:

The article is devoted to creating a refined computer model of the face packing seal (FPS) based on the solution of the two-way fluid-structure interaction (2-way FSI) problem. An approach to the average gap was proposed based on the micro-space’s working medium leakage between the friction pair’s roughness elements. Three FPS designs were studied, in which the following operating parameters were alternately changed: inlet pressure, load factor, stuffing box parameters, and friction coefficient. Young’s modulus, Poisson’s ratio, and the thickness of the annular plate at the bottom of the stuff

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Ze-Sheng, Fu-Qin Yang, Xin-Lan Zhao, and Jin-Tao Jiang. "Study on the Performance of the Composite Textured End-Face Seal of a Mixer Based on Multiphase Flow Model." Journal of Nanoelectronics and Optoelectronics 19, no. 9 (2024): 957–70. http://dx.doi.org/10.1166/jno.2024.3644.

Full text

Abstract:

To improve the performance of the mixer’s end-face sealing device, TV-SG composite textures composed of Tesla valve and spiral groove were designed on its moving ring. A gas-liquid-solid multiphase flow model was established using the Mixture and DPM models on the Fluent platform to investigate the effects of inlet pressure, moving ring speed, oil film thickness, and lubricant viscosity on its performance and particle deposition characteristics in the presence of packing leakage particles. The study indicates that as the inlet pressure increases, both the opening force and average oil film pre

APA, Harvard, Vancouver, ISO, and other styles

7

Kumar, Dileep. "AN INNOVATIVE USE OF LARYNGEAL MASK AIRWAY IN PATIENTS UNDERGOING FOR NASAL SURGERY." Journal of Ayub Medical College Abbottabad 34, no. 3 (2022): 585. http://dx.doi.org/10.55519/jamc-03-10251.

Full text

Abstract:

Emergence from general anaesthesia after nasal surgery offers several challenges, especially if there is presence of blood and secretion in pharynx. This may provoke bucking, coughing and laryngospasm. Some of these patients may require high concentration of oxygen through the anaesthesia mask, however, this may be difficult due to presence of nasal packs and/or splints (1). Various methods have been advocated to overcome emergence challenges in these patients for example patient involvement by recalling mouth breathing at the time of extubation, avoidance of nasal splints and packing and allo

APA, Harvard, Vancouver, ISO, and other styles

8

Гудков, Сергей Николаевич, and Андрей Васильевич Загорулько. "Resource tests of face packing seals with reversible grooves." Technology audit and production reserves 1, no. 1(21) (2015): 11. http://dx.doi.org/10.15587/2312-8372.2015.37319.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Emzain, Zakki Fuadi, Agus Harijono, AM Mufarrih, et al. "THE UTILIZATION OF AUTOMATIC PLASTIC SEAL PRESS MACHINES TO IMPROVE PRODUCT PACKAGING QUALITY OF BREAD ENTREPRENEURS IN SINGOSARI, MALANG." Abdi Dosen : Jurnal Pengabdian Pada Masyarakat 7, no. 3 (2023): 802. http://dx.doi.org/10.32832/abdidos.v7i3.1730.

Full text

Abstract:

Micro, Small, and Medium Enterprises (UMKM) are one of the driving forces of the economy in a local area and a booster for the community's welfare. One of the obstacles often faced by the bread entrepreneurs in Singosari District, Malang Regency, is the lack of quality product packaging that still uses manual tools and is not optimal in creating marketing content. This community service aims to provide automatic plastic seal press machines and training on marketing content creation for micro-business actors in the bread entrepreneurs so that it is expected to increase partners' competitiveness

APA, Harvard, Vancouver, ISO, and other styles

10

Emzain, Zakki Fuadi, Nanang Qosim, Ahmad Hanif Firdaus, Lisa Agustriyana, and Muhammad Akhlis Rizza. "Peningkatan Kualitas Kemasan Produk menggunakan Mesin Pres Segel Plastik Otomatis di Komunitas UMKM Shingkara Kecamatan Singosari Kabupaten Malang." Prima Abdika : Jurnal Pengabdian Masyarakat 2, no. 4 (2022): 343–51. http://dx.doi.org/10.37478/abdika.v2i4.2161.

Full text

Abstract:

Micro, Small, and Medium Enterprises (UMKM) are one of the driving forces of the economy in a local area as well as a booster for the community's welfare. One of the obstacles often faced by the Shingkara UMKM community in Singosari District, Malang Regency is the lack of quality product packaging that still uses manual tools and is not optimal in creating marketing content. This community service aims to provide automatic plastic seal press machines and training on marketing content creation for micro-business actors in the Shingkara UMKM community so that it is expected to increase partners'

APA, Harvard, Vancouver, ISO, and other styles

11

Ratnakumar, Marlish. "Innovative packaging design enhances vaccine accessibility for developing countries." Open Access Government 44, no. 1 (2024): 26–27. http://dx.doi.org/10.56367/oag-044-11478.

Full text

Abstract:

Innovative packaging design enhances vaccine accessibility for developing countries Unither Pharmaceuticals is dedicated to innovating and expanding capacity to provide equitable vaccine accessibility in developing countries and enhance preparedness for future pandemics. Here, they explain how the Euroject® device can support their goals.The SARS-CoV-2 pandemic has had a devastating impact worldwide, causing seven million deaths and infecting more than 775 million people. (1) Despite the rapid development and approval of vaccines, their distribution faced significant hurdles due to shortages o

APA, Harvard, Vancouver, ISO, and other styles

12

Naranjo-Guevara, Natalia, Bastian Stroh, and Sonja Floto-Stammen. "Packaging Communication as a Tool to Reduce Disgust with Insect-Based Foods: Effect of Informative and Visual Elements." Foods 12, no. 19 (2023): 3606. http://dx.doi.org/10.3390/foods12193606.

Full text

Abstract:

Disgust associated with insect consumption is a significant challenge faced by the insect-based food industry. One cost-effective approach that managers can employ to increase consumer acceptance is by enhancing packaging design. The packaging represents a cheap and effective means of communication. It is also referred to as a silent seller. This study investigates the potential of packaging communication in reducing disgust towards insect-based products in Germany. In a survey, 422 participants were confronted with packaging designs representing different visual and informative elements. The

APA, Harvard, Vancouver, ISO, and other styles

13

Leal, Anna Karolyne Lages, Ricardo Santos Silva, Elis Cristina de Sousa Ferreira, Raissa Soares Penha Ferreira, and Maria do Socorro Nahuz Lourenço. "The quality of roasted and ground brazilian coffee: Chemical analysis of the effect of fixed mineral residue e different types of packaging on moisture content." Research, Society and Development 10, no. 5 (2021): e11810514630. http://dx.doi.org/10.33448/rsd-v10i5.14630.

Full text

Abstract:

The agricultural production of national coffee faces controversy regarding the quality of roasted and ground coffee, being susceptible to quality loss because of oxygen and humidity exposure and high storage temperatures. In light of the importance of coffee to the Brazilian economy and consumption, a survey was made of the main brands of coffee sold in establishments in the city of São Luís, observing the presence or absence of the ABIC quality seal, the category (traditional, extra-strong, superior, gourmet), and the most common packaging types (pillow and vacuum-sealed bags). Then, two puri

APA, Harvard, Vancouver, ISO, and other styles

14

Zetterer, Th, J. Herzberg, J. Baehr, and K. Waxman. "When Failure is not an Option – Packaging Materials and Technologies for the Reliable Protection of Medical Electronics." International Symposium on Microelectronics 2018, no. 1 (2018): 000512–16. http://dx.doi.org/10.4071/2380-4505-2018.1.000512.

Full text

Abstract:

Abstract Enabling high-level electrical performance and smooth optical signal transmission is a key requirement for microelectronics packaging materials. This becomes even more relevant for biomedical applications, in which protection requirements must be met alongside standard performance and signal transmission benchmarks. The major challenge: medical packaging must to provide absolute reliability. Microelectronic components face potentially damaging working environment hazards such as high humidity, extreme temperatures, corrosive chemicals, and bodily fluid – especially in the application

APA, Harvard, Vancouver, ISO, and other styles

15

Sumantika, Arsyad, Elsya Paskaria Lodya Tarigan, and Bahariandi Aji Prasetyo. "Analisis Pengendalian Kualitas Produk Keripik Tempe di Batam Menggunakan Pendekatan Metode FMEA dan RCA." JURNAL SURYA TEKNIKA 12, no. 1 (2025): 100–108. https://doi.org/10.37859/jst.v12i1.9262.

Full text

Abstract:

This study aims to analyze the quality control of tempeh chips products in Batam using the Failure Mode and Effect Analysis (FMEA) and Root Cause Analysis (RCA) approaches. Tempeh chips are processed food products that have significant economic value for MSMEs in Batam, but often face various challenges related to quality control. The research method used is a combined qualitative and quantitative approach with a sample of 3 MSMEs producing tempeh chips in Batam. The results of the study identified several major quality problems in the tempeh chips production process, including non-uniform thi

APA, Harvard, Vancouver, ISO, and other styles

16

Julyaningsih, A. H., I. M. Hamdani, and T. Binalopa. "Development of sago-based edible plastic as primary packaging for instant food products." IOP Conference Series: Earth and Environmental Science 1471, no. 1 (2025): 012056. https://doi.org/10.1088/1755-1315/1471/1/012056.

Full text

Abstract:

Abstract Waste has become a major problem faced by humanity in the 20th century. The use of plastic in various industrial sectors as the cheapest container option for packaging their products and the improper waste management practices have led to the accumulation of plastic waste. These plastic wastes have even begun to contaminate soil and water sources in the form of microplastics. Micro plastic particles have been found in various crucial ecosystems on Earth, such as soil, seas, lakes, rivers, and even groundwater. This poses a significant threat if micro plastics contaminate food and beve

APA, Harvard, Vancouver, ISO, and other styles

17

Nurliza, Nurliza, Eva Dolorosa, and Lucky Hartanti. "Kelompok Nelayan dan Wanita Nelayan di Selakau dan Pemangkat dalam Pengolahan Udang Rebon Menjadi Bubuk Terasi Kering." Jurnal Pengabdi 1, no. 1 (2018): 26. http://dx.doi.org/10.26418/jplp2km.v1i1.25468.

Full text

Abstract:

In Selakau and Pemangkat, Sambas district, has the largest shrimp carts, particularly as Togok season, February to May. Everyday, each group of fishermen caught the shrimp for 50 kg to 1 tons. However, they faced some obstacles. In the rainy season, the catch was quickly decompose due to the absence of cool storage so that the shrimp are processed into solid pasta and pack it in a piece of newspaper, leaves or ordinary plastic. As the result, the durability and the quality of products are limited and had poor quality. Thus, the stakeholders, especially the local government be worried about the

APA, Harvard, Vancouver, ISO, and other styles

18

Knechtel, Roy, Micaela Wenig, Stefan Svoboda, et al. "Investigation of the Processing Behavior and Stability of Different Glass Frit Materials." ECS Meeting Abstracts MA2023-02, no. 33 (2023): 1618. http://dx.doi.org/10.1149/ma2023-02331618mtgabs.

Full text

Abstract:

Although glass frit bonding has long been a well-established process in the industry, research and development efforts are continuously improving it for application in modern MEMS products. First, it should be mentioned that the main advantage of the glass frit bonding is easily integration of this process module into even the most complex technologies. Using screen printing, the glass frit paste can be applied in a structured manner to one of the two wafers to be bonded, no subsequent structuring (e.g., by lithography and etching) is necessary. Subsequently, the paste is transformed into a co

APA, Harvard, Vancouver, ISO, and other styles

19

Varsan, Evhen. "Features of organization of medico-legal expert researches in the cases of the mass injuring of victims in the salon of bus." Forensic-medical examination, no. 1 (May 29, 2017): 31–37. http://dx.doi.org/10.24061/2707-8728.1.2017.7.

Full text

Abstract:

The article deals with certain medico-legal aspects of trauma in the salon of bus as one of the types of road traffic accidents with a large number of dead and injured. Are shown the typical causes of such incidents and the nature of the victims injury. Was developed and proposed a modern approach to optimization of expert research in case of appearance a large number of victims in the bus. Circumstances of injury in case of personal injury people in the bus are very diverse:− rollover of the bus when transporting a large number of people while driving;− bus falling from height;− a massi

APA, Harvard, Vancouver, ISO, and other styles

20

Zhao, Ziqian, Wenting Yu, Wenshuai Yang, et al. "Dual‐Protection Inorganic‐Protein Coating on Mg‐Based Biomaterials through Tooth‐Enamel‐Inspired Biomineralization." Advanced Materials, February 10, 2024. http://dx.doi.org/10.1002/adma.202313211.

Full text

Abstract:

AbstractBiocompatible magnesium alloys represent revolutionary implantable materials in dentistry and orthopedics but face challenges due to rapid bio‐corrosion, necessitating protective coatings to mitigate dysfunction. Directly integrating durable protective coatings onto Mg surfaces is challenging because of intrinsic low coating compactness. Herein, inspired by tooth enamel, a novel highly compact dual‐protection inorganic‐protein (inorganicPro) coating is in‐situ constructed on Mg surfaces through bovine serum albumin (BSA) protein‐boosted reaction between sodium fluoride (NaF) and Mg sub

APA, Harvard, Vancouver, ISO, and other styles

21

Kusano, Yukihiro, Alexander Leo Bardenstein, Claus Bischoff, Stanislav Landa, and Anders Ask Carton. "Polyethylene Terephthalate‐Based Heat Sealable Packaging Film Without Heat Sealing Layer." Packaging Technology and Science, April 9, 2025. https://doi.org/10.1002/pts.2901.

Full text

Abstract:

ABSTRACTThe food packaging industry is evolving to meet demands for circularity, cost‐effectiveness, lower carbon footprint and higher production efficiency with polyethylene terephthalate (PET) emerging as a preferred material for packaging. Despite its advantages, PET faces two main challenges in flexible barrier packaging applications, such as flow packs or form‐fill‐seal pouches. First, PET films for flexible packaging often lack adequate moisture and oxygen barriers, limiting their range of applications. Second, the high melting temperature of PET of around 250°C complicates the sealing p

APA, Harvard, Vancouver, ISO, and other styles

22

Tekman, Mine B., Lars Gutow, and Melanie Bergmann. "Marine Debris Floating in Arctic and Temperate Northeast Atlantic Waters." Frontiers in Marine Science 9 (July 14, 2022). http://dx.doi.org/10.3389/fmars.2022.933768.

Full text

Abstract:

Floating marine debris is ubiquitous in marine environments but knowledge about quantities in remote regions is still limited. Here, we present the results of an extensive survey of floating marine debris by experts, trained scientists from fields other than pollution or non-professional citizen scientists. A total of 276 visual ship-based surveys were conducted between 2015 and 2020 in the Northeast (NE) Atlantic from waters off the Iberian Peninsula to the Central Arctic, however, with a focus on Arctic waters. Spatiotemporal variations among regional seas (Central Arctic, Barents Sea, Green

APA, Harvard, Vancouver, ISO, and other styles

23

Loon, Julienne van. "An Excerpt from the Novella Moving." M/C Journal 6, no. 1 (2003). http://dx.doi.org/10.5204/mcj.2132.

Full text

Abstract:

“Di? Di? Come on, Di. I know you’re in there.” It would have been better if she had just said nothing, just lay there. The voice would have gone away eventually. She did attempt a small silence, leaning back on her pillow and listened to the rattling of the door handle, then a sigh, and an ongoing tapping. “Di?” Finally, she couldn’t help herself. “Fuck off, Nic.” “Come on, Di. What’s up?” “Why don’t you go and find someone else to rip off?” “What do you mean?” “You know what I mean.” “What’s wrong? Come on, let me in, Di. Please?” The door to Diana’s King Street bed-sit was pink, the paint ch

APA, Harvard, Vancouver, ISO, and other styles

24

Cruikshank, Lauren. "Synaestheory: Fleshing Out a Coalition of Senses." M/C Journal 13, no. 6 (2010). http://dx.doi.org/10.5204/mcj.310.

Full text

Abstract:

Everyone thinks I named my cat Mango because of his orange eyes but that’s not the case. I named him Mango because the sounds of his purrs and his wheezes and his meows are all various shades of yellow-orange. (Mass 3) Synaesthesia, a condition where stimulus in one sense is perceived in that sense as well as in another, is thought to be a neurological fluke, marked by cross-sensory reactions. Mia, a character in the children’s book A Mango-Shaped Space, has audition colorée or coloured hearing, the most common form of synaesthesia where sounds create dynamic coloured photisms in the visual fi

APA, Harvard, Vancouver, ISO, and other styles

25

Rushkoff, Douglas. "Coercion." M/C Journal 6, no. 3 (2003). http://dx.doi.org/10.5204/mcj.2193.

Full text

Abstract:

The brand began, quite literally, as a method for ranchers to identify their cattle. By burning a distinct symbol into the hide of a baby calf, the owner could insure that if it one day wandered off his property or was stolen by a competitor, he’d be able to point to that logo and claim the animal as his rightful property. When the manufacturers of products adopted the brand as a way of guaranteeing the quality of their goods, its function remained pretty much the same. Buying a package of oats with the Quaker label meant the customer could trace back these otherwise generic oats to their sour

APA, Harvard, Vancouver, ISO, and other styles

26

Kaur, Jasleen. "Allure of the Abroad: Tiffany & Co., Its Cultural Influence, and Consumers." M/C Journal 19, no. 5 (2016). http://dx.doi.org/10.5204/mcj.1153.

Full text

Abstract:

Introduction Tiffany and Co. is an American luxury jewellery and specialty retailer with its headquarters in New York City. Each piece of jewellery, symbolically packaged in a blue box and tied with a white bow, encapsulates the brand’s unique diamond pieces, symbolic origin story, branded historical contributions and representations in culture. Cultural brands are those that live and thrive in the minds of consumers (Holt). Their brand promise inspires loyalty and trust. These brands offer experiences, products, and personalities and spark emotional connotations within consumers (Arvidsson).

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!