Log in

Relevant bibliographies by topics / Factory CAD / Journal articles

To see the other types of publications on this topic, follow the link: Factory CAD.

Journal articles on the topic 'Factory CAD'

Author: Grafiati

Published: 4 June 2021

Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Factory CAD.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Modrak, Vladimir, Pavol Semančo, and Martin Straka. "Applying RFID for Synchronization of Factory Floor Documentation in Robotic Manufacturing Cells." Applied Mechanics and Materials 718 (December 2014): 137–42. http://dx.doi.org/10.4028/www.scientific.net/amm.718.137.

Full text

Abstract:

The goal of this article is to present the conceptual model of RFID technology integration with manufacturing information and control system. Offered ideas are motivated to achieve seamless connection between automatic identification of parts on the shop floor level and CAD/CAM/MES and ERP system. The mentioned connection could be accomplished by use of RFID technology to transfer data from shop floor level into MES environment. Modern CAD/CAM systems such as NX provide wide possibilities for generating electronic reports, such as operation lists, setup instruction, tool report, according to o

APA, Harvard, Vancouver, ISO, and other styles

2

Adam, Andrei, Cristian Cosma, Danut Sosdean, and Andrei Filip. "Designing an Injection Mould Using Advance CAD-CAM Programs." Solid State Phenomena 254 (August 2016): 267–71. http://dx.doi.org/10.4028/www.scientific.net/ssp.254.267.

Full text

Abstract:

This paper presents the design of plastic injection mould for producing a plastic product. The plastic part was designed into two different types of product, but in the same usage function. The mould was designed using the CAD program ProEngeneering Wildfire 3.0 and the DepoCam software was used to simulate the manufacturing time. The execution of the mould and the experiments were done at a private factory. Designing and simulating an injection mould before actually producing it is very useful in order to save time and cut manufacturing costs

APA, Harvard, Vancouver, ISO, and other styles

3

Buxey, Geoff. "The Nexus between CAD‐CAM and Quality." International Journal of Operations & Production Management 11, no. 10 (1991): 19–32. http://dx.doi.org/10.1108/01443579110007107.

Full text

Abstract:

The paper highlights some Australian businesses where CAD‐CAM has ramifications for the quality of goods produced. Since this technology constitutes the core of flexible automation, it eliminates direct human involvement with certain aspects of product and process design, and production. Therefore, the outcomes are more predictable. Reviews are presented of the various dimensions of quality and the potential benefits of CAD‐CAM. There is also some discussion of TQM and the tendency to focus on shopfloor (consistent) conformance to given product specifications, in contrast to recent attempts to

APA, Harvard, Vancouver, ISO, and other styles

4

Weck, M., F. Klein, R. Mertens, and C. Wenk. "New Approaches in Human-Oriented CNC-CAD-CAM: Machine Tool Control and Factory-Wide Integration." IFAC Proceedings Volumes 28, no. 23 (1995): 275–80. http://dx.doi.org/10.1016/s1474-6670(17)46631-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Caño‐Ochoa, Francisco, and Santiago Ramón‐Maiques. "Deciphering CAD : Structure and function of a mega‐enzymatic pyrimidine factory in health and disease." Protein Science 30, no. 10 (2021): 1995–2008. http://dx.doi.org/10.1002/pro.4158.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

FUJII, Susumu, Toshiya KAIHARA, and Kentarou SASHIO. "201 A Development of Distributed Virtual Factory : Integration of Area Simulators Modeled by Various Simulation Softwares." Proceedings of The Manufacturing & Machine Tool Conference 2001.3 (2001): 37–38. http://dx.doi.org/10.1299/jsmemmt.2001.3.37.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bodzás, Sándor. "Computer Aided Geomemtric Modelling of Cylindrical Worm Gear Drive Having Arched Profile." Analecta Technica Szegedinensia 9, no. 1 (2015): 1–6. http://dx.doi.org/10.14232/analecta.2015.1.1-6.

Full text

Abstract:

The objective of this publication is creation of computer geometric models (CAD) of developed in Diósgyőri Machine Factory and using exact production geometry first produced (grinded) cylindrical worm gear drive having arched profile by Illés Dudás for connection analysis, Finite Element Method analysis, etc. Since the worm and worm gear wrap each other, that is why the worm gear has to be produced by a tool geometry of which is similar to the worm geometry. Knowing of the Connection I. Statement tooth surface of driven element which is wrapped by driver element is defined by numerical calcula

APA, Harvard, Vancouver, ISO, and other styles

8

CAI, JING, MICHAEL WEYRICH, and ULRICH BERGER. "ONTOLOGICAL MACHINING PROCESS DATA MODELLING FOR POWERTRAIN PRODUCTION IN EXTENDED ENTERPRISE." Journal of Advanced Manufacturing Systems 04, no. 01 (2005): 69–82. http://dx.doi.org/10.1142/s0219686705000588.

Full text

Abstract:

As a new CAx concept, Digital Factory points out digital design of product & virtual planning of production. In this context, feature technology builds up the entire CAx process chain in Digital Factory, and facilitates STEP based engineering data generation and exchange. The collaborative computer-aided machining process planning of a transfer line is an element in process chain of extended enterprises Automotive Engineering. In practice, it is an approach engaged by both OEMs and their long-term machine suppliers. Application of a CAD-based Digital Factory planning system to design a vir

APA, Harvard, Vancouver, ISO, and other styles

9

Lin, Chen-Jiann, Tseng-Hsiang Tse, Liu-Cheng Che, and Liang-Ming Tsai. "Computer aided design and analysis on distributors in DAC columns." MATEC Web of Conferences 185 (2018): 00024. http://dx.doi.org/10.1051/matecconf/201818500024.

Full text

Abstract:

Dynamic axial compression (DAC) columns are key elements in simulated moving bed, which is a chromatography process in drug industry and chemical engineering. In this study, rules for designing distributors are proposed based on mass conservation and validated by experiments, the computer aided design (CAD) and the computational fluid dynamics (CFD). Experimental works are conducted to choose feasible numerical parameters for simulations. In CFD, the transient laminar flow fields are governed by the momentum and species transport equations with Darcy's law to model the porous zone in the packe

APA, Harvard, Vancouver, ISO, and other styles

10

Jeong, Hwa Young, and Bong Hwa Hong. "The System Software for Automatic Jam Detection and Recovery on Manufacturing System." Applied Mechanics and Materials 271-272 (December 2012): 575–79. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.575.

Full text

Abstract:

In manufacturing system, around the year 1950’s, computer aided design (CAD) and developments of NC resulted which led to the evolution of systems like computer numerical control (CNC) and direct numerical control (DNC). Today, computer integrated manufacturing is a reality. The advent of computer integrated manufacturing system has got an efficiency and high performance for production. And manufacturing system operating ratio was related by cost-efficiency of the factory operation and increasing good production. However it has still problem that the system engineer who is in the factory hard

APA, Harvard, Vancouver, ISO, and other styles

11

Kaldashev, Tsvetan. "DEVELOPMENT OF A POSTPROCESSOR FOR TURNING CENTER AND MULTI-TASK MACHINE WITH MULTI-CHANNEL CNC SYSTEMS." Proceedings of CBU in Natural Sciences and ICT 1 (November 16, 2020): 28–32. http://dx.doi.org/10.12955/pns.v1.117.

Full text

Abstract:

This article discusses the possibility of developing a postprocessor for turning center with 2 turrets and a multi-channel CNC system with NC program format characteristic of machine Mazak Integrex I series. Typical for these CNCs is the usage of two support programs - one for each turret. The CAD / CAM system PTC Creo is used to solve the problem, where tool transitions are developed for machining the workpieces. The postprocessor is software that translates the CL Data file i.e. turns it into a NC program with preparatory, technological, and supplementary commands to control the machine. G-P

APA, Harvard, Vancouver, ISO, and other styles

12

Hua, Bin Bin, Ji Sheng Ma, and Da Lin Wu. "Strength Analysis of a Naval Gun Bracket in Marine Combat Conditions." Applied Mechanics and Materials 120 (October 2011): 393–96. http://dx.doi.org/10.4028/www.scientific.net/amm.120.393.

Full text

Abstract:

In order to check the strength of a naval gun bracket, the model was established in CAD software firstly, and then exported into finite element software to establish the FEM model of the bracket. Loading inertia force simulated gun swing situation in the ocean, then the simulation process was calculated loading dynamic force. The stress curves of dangerous positions in bracket have been got and analyzed, indicating that the gun bracket design is reasonable. This research has some significance for designing and improving gun bracket, and it provides a reference to the factory strength test.

APA, Harvard, Vancouver, ISO, and other styles

13

Salehi, Vahid, and Shirui Wang. "Web-Based Visualization of 3D Factory Layout from Hybrid Modeling of CAD and Point Cloud on Virtual Globe DTX Solution." Computer-Aided Design and Applications 16, no. 2 (2018): 243–55. http://dx.doi.org/10.14733/cadaps.2019.243-255.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Rodriguez-Conde, Ivan, and Celso Campos. "Towards Customer-Centric Additive Manufacturing: Making Human-Centered 3D Design Tools through a Handheld-Based Multi-Touch User Interface." Sensors 20, no. 15 (2020): 4255. http://dx.doi.org/10.3390/s20154255.

Full text

Abstract:

Seeking a more flexible and efficient production, additive manufacturing (AM) has emerged as a major player in the industrial field, streamlining the fabrication of custom tangible assets by directly 3D printing them. However, production still takes too long due to printing, but also due to the product design stage, in which the customer works together with an expert to create a 3D model of the targeted product by means of computer-aided design (CAD) software. Skipping intermediate agents and making customers responsible for the design process will reduce waiting times and speed up the manufac

APA, Harvard, Vancouver, ISO, and other styles

15

Hutchinson, Harry. "Design in Virtual Space." Mechanical Engineering 129, no. 08 (2007): 30–34. http://dx.doi.org/10.1115/1.2007-aug-4.

Full text

Abstract:

This article illustrates features of virtual tools and their increased use in the aerospace industry. According to engineers at Dema Group, a company based in Naples, Italy, there, virtual tools are giving them greater control over the development of composite parts. The company uses a software application called FiberSIM when it designs composite parts. FiberSIM works with computer-aided design (CAD) systems to include non-geometric data in models. Like FiberSIM, ADE software contains more than the geometry of the CAD model. As described by the company in its promotional literature, the softw

APA, Harvard, Vancouver, ISO, and other styles

16

Braganca, C. A. J., and P. Sholl. "VAL-II, a language for hierarchical control of a robot-based automated factory." Robotica 3, no. 4 (1985): 265–72. http://dx.doi.org/10.1017/s026357470000237x.

Full text

Abstract:

SUMMARYThe goal of manufacturing system development today is the integration of basic production elements to suit a variety of industrial and shop floor requirements. This may seem an awesome goal, but the authors suggest that careful assessment of requirement at each level and an appreciation of the true level of complexity needed at each level for control purposes, systematic integration will be possible as products become commercially available.Six levels of integration can be defined for robot-based applications: Level 1 - the single robot application level Level 2 - the system with robots

APA, Harvard, Vancouver, ISO, and other styles

17

RYNIEWICZ, Wojciech, Łukasz BOJKO, Anna M. RYNIEWICZ, Małgorzata PIHUT, and Paweł PAŁKA. "TRI BOLOGICAL STUDIES OF LAYERED BIOMATERIALS FOR PROSTHETIC STRUCTURES BASED ON SUBSTRUCTURES MADE OF DIGITAL TECHNOLOGIES." Tribologia 287, no. 5 (2019): 87–99. http://dx.doi.org/10.5604/01.3001.0013.6566.

Full text

Abstract:

Modern dental prosthetics uses CAD/CAM in the Computer Aided Design (CAD) of substructures and its Computer Aided Manufacturing (CAM) process. The substructure is subject to appropriate veneering, which determines the functional cooperation. The aim of this study is to investigate the friction coefficient and wear resistance of the veneering layers of the substructures of prosthetic structures. The test materials are dedicated veneering layers on substructures made of factory-made CoCr, TiCP, and Ti6Al4V metal fittings as well as the glass-ceramic material LiSi2 and the ceramic ZrO2. The study

APA, Harvard, Vancouver, ISO, and other styles

18

Krisnawati, Dian, and Cahyoadi Bowo. "APLIKASI KAPUR PERTANIAN UNTUK PENINGKATAN PRODUKSI TANAMAN PADI DI TANAH SAWAH ALUVIAL." Berkala Ilmiah Pertanian 2, no. 1 (2019): 13. http://dx.doi.org/10.19184/bip.v2i1.15777.

Full text

Abstract:

ABSTRACT This research was aimed a) to find out the right calcium dose to increase aluvial agricultural land pH, and b) to find out the influence of calcification on rice plants growth and production. This research was conducted on July 2018 until January 2019 in Agricultural Faculty, University of Jember. The research design used was Completely Randomized Design (RAL) with one factor that has 6 standard and 4 repetition. Calcium dose treatment included to: Ca0 (0 ton/ha), Ca1 (1 ton/ha), Ca2 (1,3 ton/ha), Ca3 (2 ton/ha), Ca4 (2,6 ton/ha) and Ca5 (3 ton/ha). The data was statically analy

APA, Harvard, Vancouver, ISO, and other styles

19

Ayyagari, A., and A. Ray. "A Fiber-Optic-Based Protocol for Manufacturing System Networks: Part I—Conceptual Development and Architecture." Journal of Dynamic Systems, Measurement, and Control 114, no. 1 (1992): 113–20. http://dx.doi.org/10.1115/1.2896492.

Full text

Abstract:

The goal of Computer Integrated Manufacturing (CIM) is to put together the diverse areas of engineering, design and production processes, material inventory, sales and purchasing, and accounting and administration into a single interactive closed loop control system [1]. Essential to this distributed total manufacturing system is the integrated communications network over which the information leading to process interactions, and plant management and control will flow. Such a network must be capable of handling heterogeneous real-time (e.g., data packets for inter-machine communications at the

APA, Harvard, Vancouver, ISO, and other styles

20

Vajna, István, and Anita Tangl. "THE UPGRADED ROLE OF THE VALUE STREAM DESIGN FOR REDESIGNING THE FACTORY LAYOUT." Journal of Management Vol. 36, No. 2 (2020): 49–57. http://dx.doi.org/10.38104/vadyba.2020.2.08.

Full text

Abstract:

The case study shows the re-optimization of an initial new factory layout design with Value Stream Design (VSD). The VSD is a quantitative method and its’ final goal is to make a waste free optimized material flow. The primary goal of arrangement is to reduce transportation distances and frequencies, optimize human load. Initially the whole factory shop floor layout design was already made in push concept. The plans were made by production management, logistics, engineering department at the headquarter of the multinational automotive company with based on VDI2870 holistic concept linking stra

APA, Harvard, Vancouver, ISO, and other styles

21

Meidow, Jochen, Thomas Usländer, and Karsten Schulz. "Obtaining as-built models of manufacturing plants from point clouds." at - Automatisierungstechnik 66, no. 5 (2018): 397–405. http://dx.doi.org/10.1515/auto-2017-0133.

Full text

Abstract:

Abstract The capability to adapt a manufacturing plant to changing requirements gains increasing importance in industrial production environments, e. g., triggered by Industrie 4.0 scenarios. A virtual as-built model of a manufacturing plant and its surrounding factory building provides important decision support and relevant information for digital twins, e. g., to trace assets and asset types across their whole lifetime, planning of renovations, plant and machine topology changes, or the simulation-based analysis of production processes. Based on point clouds obtained by terrestrial laser sc

APA, Harvard, Vancouver, ISO, and other styles

22

Blom, Kim, Huiberdina L. Koek, Maarten H. T. Zwartbol, et al. "Vascular Risk Factors of Hippocampal Subfield Volumes in Persons without Dementia: The Medea 7T Study." Journal of Alzheimer's Disease 77, no. 3 (2020): 1223–39. http://dx.doi.org/10.3233/jad-200159.

Full text

Abstract:

Background: Vascular risk factors have been associated with risk of Alzheimer’s disease (AD) and volume loss of the hippocampus, but the associations with subfields of the hippocampus are understudied. Knowing if vascular risk factors contribute to hippocampal subfield atrophy may improve our understanding of vascular contributions to neurodegenerative diseases. Objective: To investigate the associations between age, sex, and vascular risk factors with hippocampal subfields volumes on 7T MRI in older persons without dementia. Methods: From the Medea 7T study, 283 participants (67±9 years, 68%

APA, Harvard, Vancouver, ISO, and other styles

23

Nakamura, Kengo, Tetsuo Yamada, and Kim Hua Tan. "The impact of Brexit on designing a material-based global supply chain network for Asian manufacturers." Management of Environmental Quality: An International Journal 30, no. 5 (2019): 980–1000. http://dx.doi.org/10.1108/meq-12-2018-0206.

Full text

Abstract:

Purpose The purpose of this paper is to investigate effects on global supply chain reconfigured in the customs duty rate of parts and specific material types brought about by Brexit and the Trans-Pacific Partnership (TPP). Design/methodology/approach The supply chain network is modeled and formulated using mixed integer programming. Numerical experiments are conducted using bill of materials with information such as the procurement cost of each part, 3D-CAD and an industry census. Findings The experiments indicates that if the customs duty rate increases by Brexit, manufacturers would be neces

APA, Harvard, Vancouver, ISO, and other styles

24

Michalski, Piotr, and Mariusz Piotr Hetmańczyk. "Validation Process of the Automatic Poka-Yoke Systems in Case of Symmetrical Objects." Advanced Materials Research 1036 (October 2014): 806–10. http://dx.doi.org/10.4028/www.scientific.net/amr.1036.806.

Full text

Abstract:

Steps of validation of the testing device which integrate two quality testing channels (symmetrical Poka-Yoke system) have been described in this article. System was required for testing correctness of the welds of sheet metal stampings, which can be produced as two different, evenly balanced objects (left right pieces). Authors attempted to develop the concept and the implementation of double channel Poka-Yoke system in one housing. Main reason for this integration was requirements for saving space and minimizing changeover time. The goal was reached. However the adverse condition that causes

APA, Harvard, Vancouver, ISO, and other styles

25

Chiang, Yu Cheng, Chumpol Yuangyai, and Chen yang Cheng. "Intelligent robot of inclined assembly sequence planning in Industrial 4.0." MATEC Web of Conferences 192 (2018): 01006. http://dx.doi.org/10.1051/matecconf/201819201006.

Full text

Abstract:

In the industry 4.0, the Cyber-physical system (CPS) is one of the most important core which makes the manufacturing process more intelligent. Intelligent assembly operation is an important key in intelligent manufacturing of CPS. To complete the intelligent assembly operation, the cooperation between assembly robotic arm and assembly sequence planning (ASP) is necessary. However, the ASP and writing robotic codes manually is time consuming and requires professional knowledge and experience. Because the Local Coordinate System (LCS) is often ignored when checking for interference. If product h

APA, Harvard, Vancouver, ISO, and other styles

26

Nishida, Isamu, Ryo Tsuyama, Ryuta Sato, and Keiichi Shirase. "Customized End Milling Operation of Dental Artificial Crown Without CAM Operation." International Journal of Automation Technology 12, no. 6 (2018): 947–54. http://dx.doi.org/10.20965/ijat.2018.p0947.

Full text

Abstract:

A new methodology to generate instruction commands for real-time machine control instead of preparing NC programs is developed under the CAM-CNC integration concept. A machine tool based on this methodology can eliminate NC program preparation, achieve cutting process control, reduce production lead time, and realize an autonomous distributed factory. The special feature of this methodology is the generation of instruction commands in real time for the prompt machine control instead of NC programs. Digital Copy Milling (DCM), which digitalizes copy milling, is realized by referring only to the

APA, Harvard, Vancouver, ISO, and other styles

27

MIHRIBAN, KALKANCI, and ÖZER İHSAN. "Developing a software calculating fabric consumption of various bathrobe models." Industria Textila 69, no. 05 (2018): 406–11. http://dx.doi.org/10.35530/it.069.05.1550.

Full text

Abstract:

Considering the customer requests and speed in the textile sector, very fast and accurate pricing should be done when the customers ask for very urgent prices for different styles. Customers often ask for sample pricing from apparel manufacturers. In this case, the garment manufacturer has to move quickly and accurately in determining the unit consumption of the garment. It is very important to know the correct fabric cost in pricing the garment to be produced. In general, the cost of fabric in garments accounts for 60–70% of the total cost. Manufacturers take risks when pricing the garment wi

APA, Harvard, Vancouver, ISO, and other styles

28

Alpala, Luis Omar, Maria Del Mar eva Alemany, DIego Hernán Peluffo, Fabio Andres Bolaños, Aura Maria Rosero, and Juan Carlos Torres. "Methodology for the design and simulation of industrial facilities and production systems based on a modular approach in an "industry 4.0" context." DYNA 85, no. 207 (2018): 243–52. http://dx.doi.org/10.15446/dyna.v85n207.68545.

Full text

Abstract:

The design of the industrial facilities distribution is one of the most important decisions to be made, as it will condition the operation thereof. The concept of industrial installation as it is known today has evolved to the point that it integrates automation and information systems. Indeed, such evolution has given rise to the so-called intelligent factory. At present, in order to produce customized mass products according to customers' requirements, it is become an important issue the distribution of facilities with the generation of successful layout designs, based on the flexibility, mo

APA, Harvard, Vancouver, ISO, and other styles

29

Merrell, D. Scott, and Andrew Camilli. "Regulation of Vibrio cholerae Genes Required for Acid Tolerance by a Member of the “ToxR-Like” Family of Transcriptional Regulators." Journal of Bacteriology 182, no. 19 (2000): 5342–50. http://dx.doi.org/10.1128/jb.182.19.5342-5350.2000.

Full text

Abstract:

ABSTRACT The ability of the intestinal pathogen Vibrio choleraeto undergo an adaptive stress response, known as the acid tolerance response (ATR), was previously shown to enhance virulence. An essential component of the ATR is CadA-mediated lysine decarboxylation. CadA is encoded by the acid- and infection-induced gene cadA. Herein, cadA is shown to be the second gene in an operon with cadB, encoding a lysine/cadaverine antiporter.cadC, which is 5′ of cadB, encodes an acid-responsive, positive transcriptional regulator ofcadBA. Unlike in Escherichia coli, V. cholerae cadB and cadA are also tra

APA, Harvard, Vancouver, ISO, and other styles

30

Pattnaik, Sudhanshu. "An Empirical Investigation into the Factors Influencing While Purchasing Car in India-A Confirmatory Factor Analysis." Journal of Advanced Research in Dynamical and Control Systems 11, no. 10-SPECIAL ISSUE (2019): 404–10. http://dx.doi.org/10.5373/jardcs/v11sp10/20192821.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Sejor, Eric, Tarek Debs, Niccolo Petrucciani, et al. "Feasibility and Efficiency of Sutureless End Enterostomy by Means of a 3D-Printed Device in a Porcine Model." Surgical Innovation 27, no. 2 (2020): 203–10. http://dx.doi.org/10.1177/1553350619895631.

Full text

Abstract:

Objective. The aim of this study is to present a 3-dimensional (3D)-printed device to simply perform abdominal enterostomy and colostomy. Summary Background Data. Enterostomy and colostomy are frequently performed during abdominal surgery. 3D-printed devices may permit the creation of enterostomy easily. Methods. The device was designed by means of a CAD (computer-aided design) software, Rhinoceros 6 by MC Neel, and manufactured using 3D printers, Factory 2.0 by Omni 3D and Raise 3D N2 Dual Plus by Raise 3D. Colostomy was scheduled on a human cadaver and on 6 Pietrain pigs to test the device a

APA, Harvard, Vancouver, ISO, and other styles

32

Luo, Haitao, Bingyun Li, Zhaoliang Li, Stephen J. Cutler, Gary O. Rankin та Yi C. Chen. "Chaetoglobosin K inhibits tumor angiogenesis through downregulation of vascular epithelial growth factor-binding hypoxia-inducible factor 1α". Anti-Cancer Drugs 24, № 7 (2013): 715–24. http://dx.doi.org/10.1097/cad.0b013e3283627a0b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Ferrari, Daris, Carla Codecà, Barbara Bocci, et al. "Anti-epidermal growth factor receptor skin toxicity." Anti-Cancer Drugs 27, no. 2 (2016): 144–46. http://dx.doi.org/10.1097/cad.0000000000000306.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Gao, Xingchun, Na Guo, Hao Xu, et al. "Ibuprofen induces ferroptosis of glioblastoma cells via downregulation of nuclear factor erythroid 2-related factor 2 signaling pathway." Anti-Cancer Drugs 31, no. 1 (2020): 27–34. http://dx.doi.org/10.1097/cad.0000000000000825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Glynne-Jones, Robert, Suzy Mawdsley, and Mark Harrison. "Antiepidermal growth factor receptor radiosensitizers in rectal cancer." Anti-Cancer Drugs 22, no. 4 (2011): 330–40. http://dx.doi.org/10.1097/cad.0b013e3283421290.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Pedersen, Jens, Narendrakrishnan Neythalath, Jay Hesslink, Asbjørn Søndergaard, and Dagmar Reinhardt. "Augmented drawn construction symbols: A method for ad hoc robotic fabrication." International Journal of Architectural Computing 18, no. 3 (2020): 254–69. http://dx.doi.org/10.1177/1478077120943163.

Full text

Abstract:

The global construction industry is one the least productive sectors over a 30-year period, which arguably could be related to virtually no implementation of digital and automation technologies within the construction industry. Construction processes arguably consist of expensive manual labor or manual operation of mechanized processes, where hand-drawn markings on work-objects or partly build structures are used to inform and steer the construction process or allows for ad hoc adjustments of elements. As such, the use of on-object, hand-drawn information is considered integral to the modus op

APA, Harvard, Vancouver, ISO, and other styles

37

Che Hassan, Hamat Hamdi. "Screening for Premature Coronary Artery Disease (CAD) using Coronary Artery Calcium (CAC) Score: A Primary Prevention Pilot Study." Medicine & Health 16, no. 1 (2021): 134–49. http://dx.doi.org/10.17576/mh.2021.1601.12.

Full text

Abstract:

Acute Coronary Syndrome (ACS) events can be accelerated by positive family history of young coronary artery disease (CAD). Risk factors assessment sometimes fail to predict ACS occurrence. Additional investigations with coronary artery calcium (CAC) score can be used independently in screening for primary prevention in some population. This was a cross-sectional study in asymptomatic population with first degree relatives (FDR) having premature CAD compared with a matched population with no family history of CAD from September 2017 to March 2018 at the Cardiology Clinic of Univeristi Kebangsaa

APA, Harvard, Vancouver, ISO, and other styles

38

Rogers, Jane E., Aki Ohinata, Ninoska N. Silva, Amir Mehdizadeh, and Cathy Eng. "Epidermal growth factor receptor inhibition in metastatic anal cancer." Anti-Cancer Drugs 27, no. 8 (2016): 804–8. http://dx.doi.org/10.1097/cad.0000000000000383.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Iwańczyk, Sylwia, Tomasz Lehmann, Artur Cieślewicz, et al. "Involvement of Angiogenesis in the Pathogenesis of Coronary Aneurysms." Biomedicines 9, no. 9 (2021): 1269. http://dx.doi.org/10.3390/biomedicines9091269.

Full text

Abstract:

The present study aimed to evaluate the plasma concentration of pro and antiangiogenic factors and their role in the pathogenesis of coronary artery abnormal dilation (CAAD). We measured the plasma concentration of matrix metalloproteinase-8 (MMP-8), transforming growth factor beta 1 (TGF-β1), Angiopoietin-2, vascular endothelial growth factor (VEGF), and fibroblast growth factor (FGF) using a sandwich ELISA technique in the plasma of patients with coronary artery abnormal dilation (CAAD, Group 1), coronary artery disease (CAD, Group 2), and normal coronary arteries (NCA, Group 3). Patients su

APA, Harvard, Vancouver, ISO, and other styles

40

Li, Xiaoping, Weiliang Zhu, Zhenzhu Chen та ін. "Fibroblast growth factor-inducible 14 regulates cell growth and multidrug resistance of small-cell lung cancer through the nuclear factor-κB pathway". Anti-Cancer Drugs 25, № 10 (2014): 1152–64. http://dx.doi.org/10.1097/cad.0000000000000153.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Yang, Xiao Xia, Xiao Ping Zhang, and Min Yan. "Fuzzy Comprehensive Evaluation of the Garment CAD." Advanced Materials Research 267 (June 2011): 843–47. http://dx.doi.org/10.4028/www.scientific.net/amr.267.843.

Full text

Abstract:

The fuzzy synthesis judgment is a very effective multi-factor decision method to make the comprehensive appraisal to the things affected by many factors. Affected by many uncertain factors, the garment CAD is suited with the fuzzy synthesis judgment theory to carry on the quality synthetic evaluation. Based on the fuzzy comprehensive evaluation theory and step, it is established that the second-level fuzzy synthesis judgment model of garment CAD, by carrying on the questionnaire survey to the educational circles, the garment CAD software developer, the enterprise's experts, and the rich experi

APA, Harvard, Vancouver, ISO, and other styles

42

Meng, Fanying, Xuan-Thao Nguyen, Xiaohong Cai, Jianxin Duan, Mark Matteucci, and Charles P. Hart. "ARC-111 inhibits hypoxia-mediated hypoxia-inducible factor-1?? accumulation." Anti-Cancer Drugs 18, no. 4 (2007): 435–45. http://dx.doi.org/10.1097/cad.0b013e328013ffed.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Fan, Saijun, Qinghui Meng, John J. Laterra, and Eliot M. Rosen. "Scatter factor protects tumor cells against apoptosis caused by TRAIL." Anti-Cancer Drugs 21, no. 1 (2010): 10–24. http://dx.doi.org/10.1097/cad.0b013e32832afc3b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Rukazenkov, Yuri, Georgina Speake, Gayle Marshall, et al. "Epidermal growth factor receptor tyrosine kinase inhibitors: similar but different?" Anti-Cancer Drugs 20, no. 10 (2009): 856–66. http://dx.doi.org/10.1097/cad.0b013e32833034e1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Chian, Song, Yanna Zhao, Ming Xu, et al. "Ginsenoside Rd reverses cisplatin resistance in non-small-cell lung cancer A549 cells by downregulating the nuclear factor erythroid 2-related factor 2 pathway." Anti-Cancer Drugs 30, no. 8 (2019): 838–45. http://dx.doi.org/10.1097/cad.0000000000000781.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Chauhan, Puja, Ajit Sodhi, and Shikha Tarang. "Cisplatin-treated murine peritoneal macrophages induce apoptosis in L929 cells: role of Fas???Fas ligand and tumor necrosis factor???tumor necrosis factor receptor 1." Anti-Cancer Drugs 18, no. 2 (2007): 187–96. http://dx.doi.org/10.1097/cad.0b013e3280104b11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Park, Yoon Hee, Soyeon Cho, Jeong Yee, Jae Youn Kim, Sandy Jeong Rhie, and Hye Sun Gwak. "Factors affecting time to reach and recover from gefitinib-induced hepatotoxicity." Anti-Cancer Drugs 29, no. 5 (2018): 471–76. http://dx.doi.org/10.1097/cad.0000000000000622.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Sarwal, G., A. F. Ayyobi, C. Taraboanta, and J. Frohlich. "CAD RISK FACTORS IN HYPERALPHALIPOPROTEINEMIA." Atherosclerosis Supplements 9, no. 1 (2008): 84. http://dx.doi.org/10.1016/s1567-5688(08)70335-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Joung, Youn-Kyoung, and Sang Do Noh. "Intelligent 3D packing using a grouping algorithm for automotive container engineering." Journal of Computational Design and Engineering 1, no. 2 (2014): 140–51. http://dx.doi.org/10.7315/jcde.2014.014.

Full text

Abstract:

Abstract Storing, and the loading and unloading of materials at production sites in the manufacturing sector for mass production is a critical problem that affects various aspects: the layout of the factory, line-side space, logistics, workers' work paths and ease of work, automatic procurement of components, and transfer and supply. Traditionally, the nesting problem has been an issue to improve the efficiency of raw materials; further, research into mainly 2D optimization has progressed. Also, recently, research into the expanded usage of 3D models to implement packing optimization has been

APA, Harvard, Vancouver, ISO, and other styles

50

Stomel, Robert J. "Hyperinsulinemia: Risk factor for CAD?" Journal of the American Osteopathic Association 96, no. 10 (1996): 590. http://dx.doi.org/10.7556/jaoa.1996.96.10.590.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!