Log in

Relevant bibliographies by topics / Feeding roller / Journal articles

To see the other types of publications on this topic, follow the link: Feeding roller.

Journal articles on the topic 'Feeding roller'

Author: Grafiati

Published: 28 June 2021

Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Feeding roller.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Xu, Xiao Jing, Zhen Dan Fei, Cheng Cheng, Zeng Lei Zhang, Zi Hao Zhao, and Xin Dong Zhu. "Study on Rollers’ Angular Velocity Matching of Rolling Driven Equal Channel Angular Deformation Technology." Advanced Materials Research 189-193 (February 2011): 974–78. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.974.

Full text

Abstract:

Rollers’angular velocity matching of rolling driven equal channel angular deformation technology was investigated numerically by using finite element code DEFORM-3D. The results show that as the angular velocity of primary feeding roller is constant, the rollers’ angular velocity matching had only small influences on effective strain and output velocity, but had significant influence on torque of feeding rollers. With the decrease of angular velocity ratio of primary feeding roller to secondary feeding roller from 1.37 to 0.073, the torque of feeding rollers tend to become uniform. It was foun

APA, Harvard, Vancouver, ISO, and other styles

2

Honma, Katsumi, and Shin-ichi Nakajima. "Development of a Liquid Packaging Machine Positioning Control on Moving Film." International Journal of Automation Technology 5, no. 1 (2011): 61–65. http://dx.doi.org/10.20965/ijat.2011.p0061.

Full text

Abstract:

A liquid packaging machine produces liquid packaging bags from roll film by cooperatively controlling the vertical seal roller, horizontal seal roller, and cut roller. These rollers are driven separately by servomotors as a multi-axis servo mechanism. Positioning control on the moving film is essential to make bags of accurate size. To achieve accurate positioning without lowering productivity, we propose two control methods. One is a two-step velocity control of the horizontal seal roller. This method enables continuous and high speed production of bags of arbitrary size. The second is phase

APA, Harvard, Vancouver, ISO, and other styles

3

Ebrahimi, Seyed Mohammad, Seyed Ali Asghar Akbari Mousavi, Mostafa Soltan Bayazidi, and Mohammad Mastoori. "Numerical Study of the Flow Forming Process of AISI 630 Stainless Steel." Advanced Materials Research 264-265 (June 2011): 24–29. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.24.

Full text

Abstract:

Flow forming is one of the cold forming process which is used for hollow symmetrical shapes. In this paper, the forward flow forming process is simulated using the finite element method and its results are compared with the experimental process. The variation of thickness of the sample is examined by the ultrasonic tests for the five locations of the tubes. To simulate the process, the ABAQUS explicit is used. The effects of flow forming variables such as the angle of rollers and rate of feeding of rollers, on the external variables such as internal diameter, thickness of tube and roller force

APA, Harvard, Vancouver, ISO, and other styles

4

Zhao, Ming Lei. "The Dynamic Property Analysis of Ink System in Offset Press." Advanced Materials Research 199-200 (February 2011): 132–36. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.132.

Full text

Abstract:

The printing quality is decided by the ink system, which is heavy and complicated in offset press. Structure optimization and parameter modification is the key step of seeking better performance in the ink system. In this paper, the ink system of modern offset press was the research object, seeking the discrepancy of different structures and parameters. The surfaces of ink rollers and cylinders were discreted by computer simulation,based on this,established the math model of steady time in batch and continuous ink feeding system, then analysised the feeding system and vibration system. The sim

APA, Harvard, Vancouver, ISO, and other styles

5

Choct, M., E. A. D. Selby, D. J. Cadogan, and R. G. Campbell. "Effects of particle size, processing, and dry or liquid feeding on performance of piglets." Australian Journal of Agricultural Research 55, no. 2 (2004): 237. http://dx.doi.org/10.1071/ar03105.

Full text

Abstract:

Currently, most feed grains are processed by either hammer mill or roller mill before the inclusion in pig diets. However, the effect of these two types of milling and particle size on the performance and feed utilisation has not been adequately examined. The effect of milling processing (hammer mill v. roller mill), particle size, and feeding method (liquid v. dry) was assessed in a factorial design with 120 weaner pigs over 21 days. These pigs had been weaned for 7 days when the experiment commenced. The results revealed that pigs fed on hammer-milled diets had a better performance than thos

APA, Harvard, Vancouver, ISO, and other styles

6

Liu, Xue Jiang, Hai Sheng Liu, Jing Liu, and Hui Gang Wang. "Numerical Simulation of Plate Bender Bending Process." Advanced Materials Research 189-193 (February 2011): 2228–32. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.2228.

Full text

Abstract:

The plate’s mechanical behavior of three-roller plate bending machine had been analyzed in case of upper roller feeding based on ANSYS. Strain and stress distribution of the plate and its changes are gained. The influence of upper roller’s feeding location and bending velocity to bending process are researched. The results are valuable to bending process optimization and practical technique of plate bending.

APA, Harvard, Vancouver, ISO, and other styles

7

Peng, Wen Fei, Jing Jing Liang, Xue Dao Shu, Bao Shou Sun, and Min Xiao. "The Rolling Force Analysis of Closed Ring Rolling High-Neck Flange." Applied Mechanics and Materials 201-202 (October 2012): 1130–34. http://dx.doi.org/10.4028/www.scientific.net/amm.201-202.1130.

Full text

Abstract:

The rolling force will directly have influence on the size of high-neck flange and whether the rolled part will be shaped successfully. Finite element model of closed ring rolling high-neck flange was established, the effect of process parameters on rolling force and its reasons are analyzed. The results show that, the higher feeding speed is, the larger the amplification of rolling force will be, in addition, rolling force will be reduced slightly with the increase of rotational speed of driving roller, and the influence on the rolling force of compressing roller’s feeding speed is much large

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Xin Ping. "Study on Relationship of Feeding Form and Threshing-Cleaning Rate of Corn Ears." Advanced Materials Research 753-755 (August 2013): 1462–66. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.1462.

Full text

Abstract:

For improving threshing-cleaning rate of corn ears in the process of threshing and mastering relationship of threshing-cleaning rate of corn ears and moisture content of kernel, feeding form of corn ears, threshing roller speeds, the experiments of corn ears threshed under different feeding form of corn ear and different threshing roller speeds and different moisture content of kernels was proceeded on the threshing device with dual-feeding entrances. Experiment indicate : when the value of moisture content of kernel is 25%, threshing-cleaning rate of corn ears is lower than the value of 13.5%

APA, Harvard, Vancouver, ISO, and other styles

9

Berson, R. E., and G. Friederichs. "A Self-Feeding Roller Bottle for Continuous Cell Culture." Biotechnology Progress 24, no. 1 (2008): 154–57. http://dx.doi.org/10.1021/bp070122w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

OKAMOTO, Noriaki. "Characteristic analysis of paper feeding with rubber-covered roller." Proceedings of the Conference on Information, Intelligence and Precision Equipment : IIP 2004 (2004): 5–10. http://dx.doi.org/10.1299/jsmeiip.2004.5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Burlakov, Yu V. "Using the roller threshing device for threshing fiber flax." Siberian Herald of Agricultural Science 50, no. 6 (2020): 115–23. http://dx.doi.org/10.26898/0370-8799-2020-6-13.

Full text

Abstract:

The ways of increasing efficiency of the factory technology for harvesting fiber flax with threshing stem band from the rolls were studied. The experiment was carried out in stationary conditions with a moisture content of the source material of no more than 16%. A roller threshing device was proposed for separating the seed part of the crop from the stem before feeding stems into the fiber production line. The device ensures threshing of the fiber flax stem band over its entire width without using a separate clamping conveyor. The places where the seed heap descends from the roller threshing

APA, Harvard, Vancouver, ISO, and other styles

12

Ruan, Jing Lan, and Le Le Jia. "The Numerical Simulation and Optimization of Feeding Velocity in Rubber Roller Husker Vibrating Feeder." Applied Mechanics and Materials 635-637 (September 2014): 233–36. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.233.

Full text

Abstract:

Establish the mathematical model of feeding velocity in Rubber Roller Husker vibrating feeder through analyzing the material movement, and determine the relational expression according to the theory analysis of material movement in the feeder. Analyzing the influence of groove obliquity angle , vibrating direction angle, frequencyand amplitude, which are simulated numerically by using the MATLAB software, and optimizing the material theoretical speed are the main objective. The optimal parameters of transmission and the experimental verification can provide more reference for the design of the

APA, Harvard, Vancouver, ISO, and other styles

13

Wu, Yin Feng, Jian Wei Liang, and Ling Liang. "Design of Single Roller Scutcher Control System Based on PLC." Advanced Materials Research 546-547 (July 2012): 795–99. http://dx.doi.org/10.4028/www.scientific.net/amr.546-547.795.

Full text

Abstract:

This paper analyzes the control requirements of scutcher and introduces the control system scheme which is composed of programmable logic controller, touch panel and inverter. And it emphasizes the hardware constitution of S7-200 PLC control system, the pressure detection and display of cotton feeding pipeline, together with the principles of the beater speed test program and the control program of cotton feeding motor.The scutcher control system can feed cotton continuously and equably and ensure the pressure stability of the cotton feeding pipeline. In this way, it can adjust process conveni

APA, Harvard, Vancouver, ISO, and other styles

14

Zhang, R. Y., S. W. Yu, K. H. Zhang, and F. C. Wang. "Spinnability of Semi-Continuous Casting 7A09 Aluminum Alloy." Advanced Materials Research 97-101 (March 2010): 361–64. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.361.

Full text

Abstract:

7A09 aluminum alloy is served as an important structural material in many fields. In this paper, power spinning of semi-continuous casting 7A09 aluminum alloy tube blank was carried out, and the effects of process parameters, such as spinning temperature and roller feeding ratio, on spinnability were analyzed, further the mechanical property was tested on a tensile testing machine. The results show that: at 300°C and 1.2mm/r roller feeding ratio, semi-continuous casting 7A09 aluminum alloy tube blank has good spinnability; after spun, the yield strength is increased 44%, and elongation is incr

APA, Harvard, Vancouver, ISO, and other styles

15

Okada, Masato, Makoto Shinke, Takuya Kitagawa, et al. "Influence of Tool Feed Conditions on Surface Integrity in Roller Burnishing with Rolling and Sliding Effects." Key Engineering Materials 825 (October 2019): 13–18. http://dx.doi.org/10.4028/www.scientific.net/kem.825.13.

Full text

Abstract:

The influence of tool feed conditions on the burnished-surface integrity obtained by roller burnishing, which can generate the sliding effect, adding to the rolling effect at burnishing point, is addressed. A JIS SCM420 steel round bar was used as the workpiece. The surface integrity was improved by feeding the roller in the same direction with the sliding effect and by decreasing the tool feed rate. A better surface was achieved when the roller was fed in the opposite direction to the feed direction of the turning tool in a preceding process of the burnishing.

APA, Harvard, Vancouver, ISO, and other styles

16

Michalak, Andrzej, Maciej Kuchar, and Zbigniew Mikołajczyk. "Impact of Whip Roller Parameters on Warp Dynamic Loads for 3D Fabrics Made on a Four-Comb Warp-Knitting Machine." Autex Research Journal 20, no. 1 (2020): 73–77. http://dx.doi.org/10.2478/aut-2019-0025.

Full text

Abstract:

AbstractThe most advantageous geometry of the warp feeding system was determined from the viewpoint of compensating temporary changes in the warp length during the technological cycle of a four-comb warp-knitting machine. Dynamic simulations of the feeding system were carried out for 3 different lengths of the shift of the slider with a guide bar – designating variants (series) of the cross-sectional sizes of the 3D knitted fabrics. The courses of instantaneous warp tensions during the operating cycle of the warp-knitting machine were presented. Limit dynamic loads of the warp were determined

APA, Harvard, Vancouver, ISO, and other styles

17

Coulson, Caitlin A., Nicole Woita, Tyler Spore, Hannah Wilson, Kylie Butterfield, and Galen E. Erickson. "255 Evaluation of Different Corn Milling Methods for High-moisture and Dry Corn on Nutrient Digestion." Journal of Animal Science 99, Supplement_1 (2021): 124–25. http://dx.doi.org/10.1093/jas/skab054.207.

Full text

Abstract:

Abstract A 2 × 2 factorial digestion study using seven ruminally cannulated steers evaluated the effect of feeding diets containing 70% (dry matter-basis) high-moisture (HMC) or dry corn (DC), processed with either a hammer mill or Automatic Ag Roller Mill (Pender, NE), on nutrient digestion. Feeding HMC decreased the amount of excreted dry matter (DM) and organic matter (OM; P ≤ 0.01) regardless of mill type, but there was a tendency (P ≤ 0.13) for an interaction between corn type and mill type for DM and OM digestibility. There was no difference between either milling treatments fed as HMC (

APA, Harvard, Vancouver, ISO, and other styles

18

Wang, Jiawei, Zhiwei Li, Saddam Hussain, Qi Lu, Haiyan Song, and Decong Zheng. "DESIGN AND THRESHING OUTPUTS STUDY OF INTERNAL AND EXTERNAL ROTARY ROLLER BUCKWHEAT THRESHER." INMATEH Agricultural Engineering 60, no. 1 (2020): 173–82. http://dx.doi.org/10.35633/inmateh-60-20.

Full text

Abstract:

In order to study the distribution of buckwheat threshing outputs, on the self-designed internal and external rotary roller buckwheat threshing device test bench, the feeding amount was 0.5 kg/s, the internal roller speed was 380 r/min, and the external roller speed was +50 r/min (same direction as the internal roller), 0 r/min and -50 r/min (reverse direction compared to the internal roller) for threshing test. By analysing the overall condition of the threshing outputs, the content of each component in the threshing outputs, and the axial distribution of the threshing roller, it was found th

APA, Harvard, Vancouver, ISO, and other styles

19

TSUJIUCHI, Nobutaka, Takayuki kOIZUMI, and Toru KAWAMURA. "Analysis of Slip-Phenomenon of Paper Feeding System with Protrusion Roller." Transactions of the Japan Society of Mechanical Engineers Series C 69, no. 680 (2003): 1058–64. http://dx.doi.org/10.1299/kikaic.69.1058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

MISAWA, Keiichiro, Noriaki OKAMOTO, Kenji YOSHIDA, and Masayuki KOMORI. "424 Dynamic Study on Mechanism of Paper Feeding with Rubber Roller." Proceedings of Conference of Kanto Branch 2001.7 (2001): 393–94. http://dx.doi.org/10.1299/jsmekanto.2001.7.393.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

OKAYAMA, Masao, Shigenori SATOU, Yutaka NAGASAWA, and Yutaka KAKO. "Mechanism of Double Sheet Feeding on the Roller Overlapping Friction Feeder." Transactions of the Japan Society of Mechanical Engineers Series C 62, no. 600 (1996): 3153–58. http://dx.doi.org/10.1299/kikaic.62.3153.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Ali, Khaled Abdeen Mous, Wangyuan Zong, Hafiz Md-Tahir, Lina Ma, and Liu Yang. "Design, Simulation and Experimentation of an Axial Flow Sunflower-Threshing Machine with an Attached Screw Conveyor." Applied Sciences 11, no. 14 (2021): 6312. http://dx.doi.org/10.3390/app11146312.

Full text

Abstract:

Sunflower threshing is one of the most interesting field processes for making the sunflower ready for seed handling, drying, cleaning and oil extraction. One of the biggest problems observed during the sunflower threshing process is the accumulation of threshed crop on the first third of the threshing roller and passing off some unthreshed parts of sunflower heads. To solve the aforementioned problem and optimize the efficiency of the sunflower threshing process, this research was focused on devising and testing a sunflower threshing machine with a close threshing box system equipped with a sc

APA, Harvard, Vancouver, ISO, and other styles

23

Sun, Bao Shou, Geng Feng, Xue Dao Shu, Liang Tao Qi, and Shuo Pang. "The Research on Diameter Growth of Deep Groove Ball Bearing Inner Ring in Cold Rolling Process." Advanced Materials Research 1095 (March 2015): 883–87. http://dx.doi.org/10.4028/www.scientific.net/amr.1095.883.

Full text

Abstract:

There is a close relationship between cold ring rolling product quality and ring diameter growth rate in cold rolling process, but the technological parameters are main factors in influencing ring diameter growth. The paper used both numerical simulation and experimental verification to study the effect of the core roller speed and wide-diameter ratio on increment of ring diameter in cold rolling process of deep groove ball bearing inner ring. It is found that the core roller has greater influence on diameter growth, and the faster the feeding speed of core roller is , the greater the incremen

APA, Harvard, Vancouver, ISO, and other styles

24

Lin, Jia Horng, Wen Hao Hsing, Ching Wen Lin, Chien Teng Hsieh, Wen Tai Cho, and Ching Wen Lou. "Manufacturing Design of the Novel Multi-Layer Blending Machine." Advanced Materials Research 233-235 (May 2011): 3023–26. http://dx.doi.org/10.4028/www.scientific.net/amr.233-235.3023.

Full text

Abstract:

In this study, a multi-layer blending machine was designed to mix cotton evenly. Being put inside via the feeding port, cotton was spread evenly by the oscillator which moves from left to right back and forth successively. Subsequently, cotton was stored as the multi-layer fibrous cotton in the rear reserve tank. Delivered by the first and the second conveyer belt, the fibrous cotton was sent to the front storage chamber to be cut by a lattice which pulled and dragged the marching cotton vertically. Finally, the processed cotton was rolled out by a striper roller, falling at a certain spot as

APA, Harvard, Vancouver, ISO, and other styles

25

Liu, Yao, Xin Yue Liu, and Bai Yuan Lv. "Research on Spiral Engagement Cold Feeding Rubber Extruder." Key Engineering Materials 501 (January 2012): 283–88. http://dx.doi.org/10.4028/www.scientific.net/kem.501.283.

Full text

Abstract:

Through the experimental comparison of free feeding technology, roller feeding technology and spiral engagement feeding technology, it can be seen that the spiral engagement feeding technology has significantly increased production capacity, improved extrusion stability, reduced the energy consumption and does not hold shaft, not leak rubber, etc; at the same time, industrial application research on spiral engagement cold feeding extruder was carried out, as well as expanding its application research on this extruder with short fiber compound and environmental protection plate compound which i

APA, Harvard, Vancouver, ISO, and other styles

26

Xue, Kemin, Chao Wu, Weizheng Yang, Guangxu Dai, Ping Li, and Siliang Yan. "Study on Rotary Bending Forming Process of Torsional Damper Shell Pulley." Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 37, no. 5 (2019): 1053–59. http://dx.doi.org/10.1051/jnwpu/20193751053.

Full text

Abstract:

To study the integral forming process of torsion damper shell pulley with characteristic structure is of great significance for producing and developing of the rotational part such as shell pulley. A processing way was proposed by combining plate bending forming and roller structure design, to integral forming torsion damper shell pulley. A model for two-step bending forming was establishedvia finite element method. Under the radial feeding of roller, the outer edge of plate was subjected to compress thickening and secondary thickened after bending, and effective stress and metal flow in the d

APA, Harvard, Vancouver, ISO, and other styles

27

Liu, Xue Qiang, Jian Chun Zhang, Hao Zhang, and Xin Hu. "Dynamic Load Simulation Analysis of Hemp Stalk." Applied Mechanics and Materials 303-306 (February 2013): 2724–26. http://dx.doi.org/10.4028/www.scientific.net/amm.303-306.2724.

Full text

Abstract:

The distribution of maximum equivalent stress on hemp stalks at different roller speeds were scavenged by LS-PREPOST function. The stress and strain distributions of hemp stalk under the transversely even-distributed load are analyzed through ANSYS software. The results show that hemp decortication largely depended on the rotation speed of separation roller and the feeding rate. In addition, the failure degree of bast fiber, the maturity and the water content of the stalk, and the difference in mechanical properties and geometrical size should be also taken into account.

APA, Harvard, Vancouver, ISO, and other styles

28

Bahar, Mohammad, and Michael Sinapius. "Adaptive Feeding Roller with An Integrated Cutting System for Automated Fiber Placement (AFP)." Journal of Composites Science 4, no. 3 (2020): 92. http://dx.doi.org/10.3390/jcs4030092.

Full text

Abstract:

Automated Fiber Placement (AFP) has been used for more than 30 years as a manufacturing process for large components such as aircraft fuselage or nose made of composite materials. As the literature research showed, 85% of efficient AFP head process time is used for the cutting process, accelerating, decelerating and necessary directional changes of the AFP head. The AFP head consists of various modules that synchronize the complete process. In recent years, scientists tried to extend the advantages of this technique and optimize the process. The aim of this article is to show the integration o

APA, Harvard, Vancouver, ISO, and other styles

29

Ju, Jiang, Yang Zhou, Maodong Kang, and Jun Wang. "Optimization of Process Parameters, Microstructure, and Properties of Laser Cladding Fe-Based Alloy on 42CrMo Steel Roller." Materials 11, no. 10 (2018): 2061. http://dx.doi.org/10.3390/ma11102061.

Full text

Abstract:

The mould foot roller is a key component of a continuous casting machine. In order to investigate the possibility of using laser cladding to repair mould foot roller, Fe-based powders and 42CrMo steel are used in this work. The laser cladding process parameters were optimized by orthogonal experiments. The chemical compositions, microstructure, properties of the cladding layer under the optimum process parameters, and substrate were systematically investigated by using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), mi

APA, Harvard, Vancouver, ISO, and other styles

30

Wu, Jun Hui, Quan Zhou, Jie Chen, Hui Ping Si, and Chi Bin Zhang. "Structural Design for Dynamic Roller Device in Transporting Unit of Biomass Pyrolytic System." Applied Mechanics and Materials 157-158 (February 2012): 361–66. http://dx.doi.org/10.4028/www.scientific.net/amm.157-158.361.

Full text

Abstract:

With the full study of industrial process control technology for thermal, chemical industry, the application process, the FCS system of biomass pyrolysis unit was development combined with the actual. Feeding system uses the weighing system of dynamic belt with an advanced embedded technology. The computing speed and accuracy, data processing compared with traditional electronic belt scale, information exchange, integration, reliability and stability will be greatly improved. The technology shall be constantly upgraded and vigorously promoted. The frame structures of dynamic roller were variou

APA, Harvard, Vancouver, ISO, and other styles

31

MORI, Seiichi, Noriaki OKAMOTO, Takeshi SAKAI, and Akihiro URAOKA. "Effect of flexible media property on velocity of feeding with rubber roller." Proceedings of the JSME annual meeting 2003.4 (2003): 223–24. http://dx.doi.org/10.1299/jsmemecjo.2003.4.0_223.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Yu, Mingzhe, Chalak Omar, Alexander Schmidt, James D. Litster, and Agba D. Salman. "Improving feeding powder distribution to the compaction zone in the roller compaction." European Journal of Pharmaceutics and Biopharmaceutics 128 (July 2018): 57–68. http://dx.doi.org/10.1016/j.ejpb.2018.04.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

EXPÓSITO-GRANADOS, MÓNICA, DESEADA PAREJO, OLIVIER CHASTEL, and JESÚS M. AVILÉS. "Physiological stress and behavioural responses of European Rollers and Eurasian Scops Owls to human disturbance differ in farming habitats in the south of Spain." Bird Conservation International 30, no. 2 (2019): 220–35. http://dx.doi.org/10.1017/s0959270919000388.

Full text

Abstract:

SummaryHuman activities are altering ecosystems and threatening the well-being of wildlife. The study of the stressful effects of human disturbances on animal distribution, physiology and behaviour can provide fundamental insights for wildlife conservation. Here, we assess how two declining birds, the European Roller Coracias garrulus and the European Scops Owl Otus scops, cope with alteration by human activities in farming habitats of the south of Spain. We studied nest distribution, quantified nestling physiology (corticosterone levels in plasma and feathers and body weight close to fledglin

APA, Harvard, Vancouver, ISO, and other styles

34

Sun, Jing Rui, and Jin Cheng Wu. "Research and Implementation of Folding Machine Control System Based on MPU." Advanced Materials Research 383-390 (November 2011): 5838–43. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.5838.

Full text

Abstract:

The purpose of this paper is to analyze the working principle of folding machine and it also explains the working mode of the stepper motor. Basing on these, the control-system of folding machine is designed. It is through the AT89C52 MPU and the corresponding circuit of periphery to control the two stepper motors. So it can drive the feeding roller and the paper roller to overlay in accordance with the predefined size. The system achieves the automation of folding. It not only reduces the labor, but also improves the efficiency and accuracy of folding. It has a very broad application prospect

APA, Harvard, Vancouver, ISO, and other styles

35

Chen, Guang Feng, Wei Bin Wang, Hao Chun Sun, and Qing Qing Li. "Yarn Feeding Compensation Algorithm and Implementation for Needbar Transverse Shifting of Carpet Tufting Machine." Advanced Materials Research 179-180 (January 2011): 150–55. http://dx.doi.org/10.4028/www.scientific.net/amr.179-180.150.

Full text

Abstract:

The needle bar transverse shifting will likely form the stop mark liked gap on the tufted carpet. This paper proposed the yarn feeding compensation scheme and illustrate implement method in detail. Through analysis the change in yarn feeding path and loop pile forming of carpet tufting machine, construct the mathematical model of length change of yarn feeding in path and usage of loop pile forming while needle bar shifting. According to the mathematical model for yarn feeding compensation, calculate the additional yarn feeding requirement. Base on jacquard control principle, dynamic control th

APA, Harvard, Vancouver, ISO, and other styles

36

Liu, Yong Xia, Shu Liang Zou, Tao Tang, and Qi Wang Zhou. "Study on Simulation of the Chain Transmission Mechanism." Advanced Materials Research 591-593 (November 2012): 797–800. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.797.

Full text

Abstract:

The chain transmission’s feature, the main failure form of roller chain and the research for the simulation of the chain transmission mechanism are introduced. Taking the simulation of the chain transmission mechanism in feeding system of a mechanical equipment as the research object, the kinematical properties and the affecting factors are analysed in this paper. It adopts the advanced connection pair to establish relationship between the sprocket-wheel and rollers, and realistically simulates the kinematical characteristics of the chain transmission mechanism. It provides a reference for the

APA, Harvard, Vancouver, ISO, and other styles

37

Zhu, X. D., Xiao Jing Xu, Z. H. Zhao, K. Chong, C. Cheng, and Xiao Nong Cheng. "The Novel Continuous Large Deformation Technology Integrating Conventional Rolling with Equal-Channel Angular Technology." Materials Science Forum 667-669 (December 2010): 127–32. http://dx.doi.org/10.4028/www.scientific.net/msf.667-669.127.

Full text

Abstract:

A new continuous severe plastic deformation (SPD) procedure integrating conventional rolling with equal-channel angular deformation (designated CR-ECA deformation procedure) was investigated. Experimental results show that the SPD procedure has the capacity of realizing continuous SPD processing of long-size work-pieces with good surface qualities. Numerical simulations by using finite element code DEFORM-3D show that the number of roller pairs had significant influences on the the CR-ECA deformation procedure. As the number of roller pairs changed from 1 to 2, 3 and 4, the effective strain in

APA, Harvard, Vancouver, ISO, and other styles

38

Karim, Md Rejaul, Muhammad Arshadul Hoque, Alamgir Chawdhury, et al. "Design, Development, and Performance Evaluation of a Power-Operated Jute Fiber Extraction Machine." AgriEngineering 3, no. 2 (2021): 403–22. http://dx.doi.org/10.3390/agriengineering3020027.

Full text

Abstract:

Jute is the golden fiber of Bangladesh, but its production is declining due to the involvement of higher production and processing costs, where a major portion of the cost is needed for fiber extraction. Labor unavailability and increasing labor cost have led to higher jute fiber production cost. To address these issues, this study looks at the development of a power-operated and cost-effective fiber extraction machine aiming at reducing the production cost. The study was conducted at the Rangpur regional office premises of Practical Action in Bangladesh, and the developed machine was branded

APA, Harvard, Vancouver, ISO, and other styles

39

Abhiram, G., S. Jinthushayi, and N. S. Withanage. "Optimization of feeding rate and pressure of Orthodox Roller in Black Tea production." AGRIEAST: Journal of Agricultural Sciences 12, no. 1 (2018): 16. http://dx.doi.org/10.4038/agrieast.v12i1.48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Pryshchepau, M. A., V. A. Daineko, and A. M. Pryshchepava. "Substantiation of the algorithm for controlling the adjustable electric drive of roller crusher-grinders of forage grain." Agricultural Science Euro-North-East 21, no. 2 (2020): 183–98. http://dx.doi.org/10.30766/2072-9081.2020.21.2.183-198.

Full text

Abstract:

In recent years, along with the traditional technology of dry grain storage and grinding before feeding, the technology of preserving crushed grain at an early stage of ripeness is widely used. These technologies do not replace each other, but objectively complement each other, that is, they exist in parallel and require appropriate equipment for their implementation. To do this, it is necessary to use universal energy-efficient equipment for crushing feed grain with a high annual load. As such equipment, it is advisable to use roller crusher-grinders with individual electric drive of the roll

APA, Harvard, Vancouver, ISO, and other styles

41

Zhao, Qun, and Jin Fang Zhao. "Designs of Material Compactor Based on Vibration Theory." Advanced Materials Research 700 (May 2013): 187–90. http://dx.doi.org/10.4028/www.scientific.net/amr.700.187.

Full text

Abstract:

In this paper, a kind of material compactor was designed beginning with the recognition of energy conservation and low cost. Through the study of the influence factors and the mechanization of the material compaction at normal temperature, the author found out better parameters of influencing factors. The improved material compactor consists of a compression roller, backspin rolls, supporting device and other auxiliary devices. The eccentric block inside the compression is driven by the motor to generate exciting force. After the material enters the feeding inlet, it will be squeezed between t

APA, Harvard, Vancouver, ISO, and other styles

42

Dawes, Jason, John F. Gamble, Richard Greenwood, Phil Robbins, and Mike Tobyn. "An investigation into the impact of magnesium stearate on powder feeding during roller compaction." Drug Development and Industrial Pharmacy 38, no. 1 (2011): 111–22. http://dx.doi.org/10.3109/03639045.2011.594802.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

OKAMOTO, Noriaki, Kazuhiro OHTANI, Keiichirou MISAWA, and Kenji YOSHIDA. "Study on Velocity Characteristics and Mechanics of Paper Feeding with Rubber-Covered Roller Drive." Transactions of the Japan Society of Mechanical Engineers Series C 67, no. 654 (2001): 475–82. http://dx.doi.org/10.1299/kikaic.67.475.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Liu, Shi Biao, Ke Lu Wang, Shi Qiang Lu, Xin Li, and Xian Juan Dong. "Feed Speed Design and Optimization in Radial-Axial Ring Rolling Process by FEM." Advanced Materials Research 421 (December 2011): 513–21. http://dx.doi.org/10.4028/www.scientific.net/amr.421.513.

Full text

Abstract:

Radial-axial ring rolling is an important component of advanced manufacturing technology, but it has characteristics of high nonlinear on geometry and physics, so the radial-axial ring rolling process becomes very complex. In addition, the feeding mode of core roller has enormous influence on the quality of the rolled ring as well as the stability of the process. In this paper, a 3D rigid-plastic FE model of radial-axial ring rolling process is established, then three kinds of feed speed design ((1)constant of feed speed; (2)constant of feed in one rotary; (3)variation of feed speed)are offere

APA, Harvard, Vancouver, ISO, and other styles

45

Fedotov, V. A., P. V. Medvedev, and S. Yu Solovykh. "Application of the information measuring system to improve the feeding mechanism of a roller machine." Journal of Physics: Conference Series 1353 (November 2019): 012079. http://dx.doi.org/10.1088/1742-6596/1353/1/012079.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Sivakumaran, N., and K. Thiyagesan. "Population, diurnal activity patterns and feeding ecology of the Indian Roller Coracias benghalensis (Linnaeus, 1758)." Zoos' Print Journal 18, no. 5 (2003): 1091–95. http://dx.doi.org/10.11609/jott.zpj.18.5.1091-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

UMANO, Hiroshi, and Hiroshi YAMAURA. "FMF-07 CHARACTERISTICS OF PAPER FEEDING MECHANISM WITH A SHORT-RUBBER ROLLER AND A FLAT PLATE(Flexible Media Feeding and Handling Machines II,Technical Program of Oral Presentations)." Proceedings of JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment : IIP/ISPS joint MIPE 2009 (2009): 143–44. http://dx.doi.org/10.1299/jsmemipe.2009.143.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Luo, Ya Lan, and Chun Hua Zhao. "Design and Experimental Study of a Mower Conditioner Drive System." Applied Mechanics and Materials 488-489 (January 2014): 1169–72. http://dx.doi.org/10.4028/www.scientific.net/amm.488-489.1169.

Full text

Abstract:

According to the forage of mountain region harvesting requirements, a transmission of montanic mower conditioner was designed. The drive system was combined with automatic tension sprocket and double chain wheel of upper and lower crushers, firstly, to realize the automatic regulation and relative motion of two flattening roller, secondly, the power was passed to reel device and achieved forage feeding function; the off-center slider crank mechanism drove the horizontal header to realize the grass cutting function. Through the theoretical analysis and experimental study of the system working p

APA, Harvard, Vancouver, ISO, and other styles

49

Stack, K. D., and R. C. Benson. "A Study of Friction Feed Paper Separation." Journal of Engineering for Industry 115, no. 2 (1993): 236–41. http://dx.doi.org/10.1115/1.2901655.

Full text

Abstract:

An understanding of the mechanics of paper separation is very important to the design of reliable photocopiers, and in this paper a model is developed to simulate friction feed paper separation. The importance of such system parameters as roller acceleration and compressive load is demonstrated. The variability of friction coefficients is shown to have a significant effect on feeding reliability. Experimental data are shown to be in good agreement with predicted results. Recommendations are made for the design of reliable friction feed paper separators.

APA, Harvard, Vancouver, ISO, and other styles

50

UMANO, Hiroshi, and Hiroshi YAMAURA. "Characteristics of Paper Feeding Mechanism with a Short Rubber-Roller and a Flat Plate(Mechanical Systems)." Transactions of the Japan Society of Mechanical Engineers Series C 75, no. 755 (2009): 1965–73. http://dx.doi.org/10.1299/kikaic.75.1965.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!