Relevant bibliographies by topics / Fiber Composite Materials

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Fiber Composite Materials'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fiber Composite Materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Fiber Composite Materials"

1

Sathish, S., T. Ganapathy, and Thiyagarajan Bhoopathy. "Experimental Testing on Hybrid Composite Materials." Applied Mechanics and Materials 592-594 (July 2014): 339–43. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.339.

Full text
Abstract:
In recent trend, the most used fiber reinforced composite is the glass fiber composite. The glass-fiber composites have high strength and mechanical properties but it is costlier than sisal and jute fiber. Though the availability of the sisal and jute fiber is more, it cannot be used for high strength applications. A high strength-low cost fiber may serve the purpose. This project focuses on the experimental testing of hybrid composite materials. The hybrid composite materials are manufactured using three different fibers - sisal, glass and jute with epoxy resin with weight ratio of fiber to resin as 30:70. Four combinations of composite materials viz., sisal-epoxy, jute-epoxy, sisal-glass-epoxy and sisal-jute-epoxy are manufactured to the ASTM (American Society for Testing and Materials) standards. The specimens are tested for their mechanical properties such as tensile and impact strength in Universal Testing machine. The results are compared with that of the individual properties of the glass fiber, sisal fiber, jute fiber composite and improvements in the strength-weight ratio and mechanical properties are studied.
APA, Harvard, Vancouver, ISO, and other styles
2

Öztaş, Saniye Karaman. "Fiber Reinforced Composite Materials in Architecture." Applied Mechanics and Materials 789-790 (September 2015): 1171–75. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.1171.

Full text
Abstract:
Composite materials are made from two or more constituent materials with significantly different physical or chemical properties. The materials work together to give the composite more excellent properties than its components.Fiber reinforced composite materials constitute a widely used group of the composites. There are many researches about fiber reinforced composites. This study focused on fiber reinforced composite materials used in architecture unlike other researches. It was aimed to specify the benefits of the fiber composite materials for architecture and discussed several recent developments related to these materials. A literature review was made by grouping composites materials. The study reported that more research is needed for fiber reinforced composites to improve their technical performance, environmental and economic properties.
APA, Harvard, Vancouver, ISO, and other styles
3

Gerezgiher, Alula Gebresas, Halefom Aregay Bsrat, Andrea Simon, and Tamás Szabó. "Development and Characterization of Sisal Fiber Reinforced Polypropylene Composite Materials." International Journal of Engineering and Management Sciences 4, no. 1 (March 3, 2019): 348–58. http://dx.doi.org/10.21791/ijems.2019.1.43.

Full text
Abstract:
In most of the developing countries, plastic polypropylene is not fully recycled and converted in-to use after it is once used. Sisal fiber is also widely available in different developing countries like Ethiopia. Adding this two materials and developing automotive interior part was taken as a primary motive for it reduces cost and is environmentally friendly. Thus, the main purpose of this research is to develop composite material from natural fibre (sisal fiber) reinforced with recycled plastic waste (polypropylene) for interior automobile accessories specifically for internal door trim panel application. This research examines effect of fiber length, fiber loading and chemical treatment of fiber on the physical and chemical properties of the sisal fiber reinforced polypropylene (SFRPP) composite material. The waste polypropylene and the treated and untreated sisal fiber with variable length and weight ratio (fiber/matrix ratio) were mixed. Flammability of sisal fiber reinforced Polypropylene (SFRPP) composites material was examined by a horizontal burning test according to ASTM D635 and chemical resistance of the sisal fibre reinforced PP composites was studied using ASTM D543 testing method. The result on the flammability test shows that treated fiber has lower burning rate than untreated fiber and decreases with increase in fiber length and fiber loading. The resistance of the composites to water has increased as the fiber length increases and decreased as the fiber loading increase. Generally, SFRPP composite is found to have better resistance to water than NaOH and H2SO4 and treating the fiber has brought considerable improvement on chemical resistance of the composite. Fiber loading and fiber length has positive and negative effect on the flammability of the SFRPP composite respectively.
APA, Harvard, Vancouver, ISO, and other styles
4

Lim, Jae Kyoo, Jun Hee Song, Jun Yong Choi, and Hyo Jin Kim. "Effects of Matrix on Mechanical Property Test Bamboo Fiber Composite Materials." Key Engineering Materials 297-300 (November 2005): 1529–33. http://dx.doi.org/10.4028/www.scientific.net/kem.297-300.1529.

Full text
Abstract:
In recent years, the use of natural fibers as reinforcements in polymer composites to replace synthetic fibers like glass is presently receiving increasing attention. Because of their increasing use combined with high demand, the cost of thermosetting resin has increased rapidly over the past decades. However the widely used synthetic fillers such as glass fiber are very expensive compared to natural fibers. Natural fiber-reinforced thermosetting composites are more economized to produce than the original thermosetting. Moreover the use of natural fiber in thermosetting composites is highly beneficial, because the use of natural fibers will be increased. In this study, a bamboo fiber-reinforced thermoplastic composite that made the RTM was evaluated to mechanical properties.
APA, Harvard, Vancouver, ISO, and other styles
5

MASAO, SUMITA. "Composite Materials." Sen'i Gakkaishi 45, no. 12 (1989): P556—P563. http://dx.doi.org/10.2115/fiber.45.12_p556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Chun Hua, Jin Bao Zhang, Mu Chao Qu, and Jian Nan Zhang. "Toughness Properties of Basalt/Carbon Fiber Hybrid Composites." Advanced Materials Research 150-151 (October 2010): 732–35. http://dx.doi.org/10.4028/www.scientific.net/amr.150-151.732.

Full text
Abstract:
Basalt fiber and carbon fiber hybrid with alternate stacking sequences reinforced epoxy composites have been developed to improve the toughness properties of conventional carbon fiber reinforced composite materials. For comparison, plain carbon fiber laminate composite and plain basalt fiber laminate composite have also been fabricated. The toughness properties of each laminate have been studied by an open hole compression test. The experimental results confirm that hybrid composites containing basalt fibers display 46% higher open hole compression strength than that of plain carbon fiber composites. It is indicated that the hybrid composite laminates are less sensitive to open hole compared with plain carbon fiber composite laminate and high toughness properties can be prepared by fibers' hybrid.
APA, Harvard, Vancouver, ISO, and other styles
7

Rajak, Dipen, Durgesh Pagar, Pradeep Menezes, and Emanoil Linul. "Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications." Polymers 11, no. 10 (October 12, 2019): 1667. http://dx.doi.org/10.3390/polym11101667.

Full text
Abstract:
Composites have been found to be the most promising and discerning material available in this century. Presently, composites reinforced with fibers of synthetic or natural materials are gaining more importance as demands for lightweight materials with high strength for specific applications are growing in the market. Fiber-reinforced polymer composite offers not only high strength to weight ratio, but also reveals exceptional properties such as high durability; stiffness; damping property; flexural strength; and resistance to corrosion, wear, impact, and fire. These wide ranges of diverse features have led composite materials to find applications in mechanical, construction, aerospace, automobile, biomedical, marine, and many other manufacturing industries. Performance of composite materials predominantly depends on their constituent elements and manufacturing techniques, therefore, functional properties of various fibers available worldwide, their classifications, and the manufacturing techniques used to fabricate the composite materials need to be studied in order to figure out the optimized characteristic of the material for the desired application. An overview of a diverse range of fibers, their properties, functionality, classification, and various fiber composite manufacturing techniques is presented to discover the optimized fiber-reinforced composite material for significant applications. Their exceptional performance in the numerous fields of applications have made fiber-reinforced composite materials a promising alternative over solitary metals or alloys.
APA, Harvard, Vancouver, ISO, and other styles
8

Lopena, Jerome D., and Jeremiah C. Millare. "Mechanical Properties and Thermal Analysis of Salago and Coir Hybrid Fiber Reinforced Epoxy Resin Composites." Key Engineering Materials 889 (June 16, 2021): 3–8. http://dx.doi.org/10.4028/www.scientific.net/kem.889.3.

Full text
Abstract:
The utilization of natural fibers in composites continues to increase due to their advantages over the synthetic fiber materials especially in terms of environmental impact and costs. One of the techniques that can be used to further enhance the properties of these natural fiber reinforced composites is through fiber hybridization. In this study, salago and coir fibers were reinforced in the epoxy resin to form a new hybrid composite. The salago to coir fiber weight ratios considered in the fiber hybridization were 3:1, 1:1 and 1:3. The performance of these hybrid fiber composites were compared to pure coir fiber composite and salago fiber composite in terms of impact strength, tensile properties and flexural properties. Among the hybrid fiber composites, the fiber weight ratio of 3:1 has the highest tensile strength (33.8 MPa), tensile modulus (3.57 GPa), flexural strength (44.2 MPa) and impact strength (42.3 J/m). It was found out that the addition of coir to this hybrid fiber composite improves the tensile strength by about 21.1 % as compared to the salago fiber composite. On the other hand, the addition of salago fiber to this hybrid fiber composite resulted to a higher tensile modulus (43.4 %) and impact strength (25.5 %) than the coir fiber composite. Moreover, the thermal analysis of the composites revealed a peak degradation temperature at around 370 °C which is associated to the decomposition of cellulose, hemicellulose and epoxy resin.
APA, Harvard, Vancouver, ISO, and other styles
9

Sloan, Forrest, and Huy Nguyen. "Mechanical Characterization of Extended-Chain Polyethylene (ECPE) Fiber-Reinforced Composites." Journal of Composite Materials 29, no. 16 (November 1995): 2092–107. http://dx.doi.org/10.1177/002199839502901601.

Full text
Abstract:
Composite materials reinforced with extended-chain polyethylene (ECPE) fibers are unlike typical stiff and brittle composite materials such as graphite/epoxy or fiberglass. The high ductility and energy absorption capacity of the ECPE reinforcing fibers gives these composites a unique mechanical response which makes them ideally suited for a variety of applications. However, this dissimilarity with more common materials requires special consideration of mechanical properties testing. In this paper, the mechanical behavior of ECPE-fiber-reinforced composites is investigated using standard composite test methods. Results of these tests are presented and discussed based on the properties of the ECPE reinforcing fibers and on the assumptions inherent in the test methods. ECPE/epoxy composites are characterized by high ultimate tensile strength, high tensile modulus, low shear modulus and strength, and viscoelastic response to loading. The highest available combination of fiber strength and strain-to-failure gives this material ductility and energy absorption capacity significantly higher than other common composite materials. Applications of ECPE composites are discussed.
APA, Harvard, Vancouver, ISO, and other styles
10

Mohan, TP, and K. Kanny. "Processing of high weight fraction banana fiber reinforced epoxy composites using pressure induced dip casting method." Journal of Composite Materials 55, no. 17 (January 20, 2021): 2301–13. http://dx.doi.org/10.1177/0021998320988044.

Full text
Abstract:
The objective of this work is to realize new polymer composite material containing high amount of natural fibers as a bio-based reinforcement phase. Short banana fiber is chosen as a reinforcement material and epoxy polymer as a matrix material. About 77 wt.% of banana fibers were reinforced in the epoxy polymer matrix composite, using pressure induced fiber dipping method. Nanoclay particles were infused into the banana fibers to improve the fiber matrix interface properties. The nanoclay infused banana fiber were used to reinforce epoxy composite and its properties were compared with untreated banana fiber reinforced epoxy composite and banana fiber reinforced epoxy filled with nanoclay matrix composite. The surface characteristics of these composites were examined by electron microscope and the result shows well dispersed fibers in epoxy matrix. Thermal (thermogravimetry analysis and dynamic mechanical analysis), mechanical (tensile and fiber pullout) and water barrier properties of these composites were examined and the result showed that the nanoclay infused banana fiber reinforced epoxy composite shows better and improved properties. Improved surface finish composite was also obtained by this processing technique.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Fiber Composite Materials"

1

Bulsara, Vatsal N. "Effects of fiber spatial distribution and interphase on transverse damage in fiber-reinforced ceramic matrix composites." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/21429.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Xiang. "Thermoforming continuous fiber reinforced thermoplastic composites." Diss., Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/9383.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Enemuoh, Emmanuel Ugochukwu. "Smart drilling of advanced fiber reinforced composite materials /." free to MU campus, to others for purchase, 2000. http://wwwlib.umi.com/cr/mo/fullcit?p9998482.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Veazie, David R. "Modeling of fiber reinforced composites incorporating distinct interface properties." Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/17385.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Perkins, Holly Lyn. "Air knife fiber spreading in composites manufacturing." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/19068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pathak, Sayali V. "Enhanced Heat Transfer in Composite Materials." Ohio University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1368105955.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Razvan, Ahmad. "Fiber fracture in continuous-fiber reinforced composite materials during cyclic loading." Diss., This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-05042006-164536/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lin, Shih-Yung. "Feasibility of fiber reinforced composite materials used in highway bridge superstructures." Thesis, Virginia Tech, 1988. http://hdl.handle.net/10919/45894.

Full text
Abstract:

Composite materials are considered here as structural materials of highway bridge superstructures. Bridge deck designs can be done according to AASHTO1 specification and elastic design concepts.

In order to evaluate the feasibility of composites as structural materials of highway bridge superstructures, composite materials are compared not only to composite materials themselves but also to the most popular bridge structural materials, which are reinforced concrete and structural steel.

The AASHTO1 HS2O-44 truck load is selected as the standard loading condition of all designs. Loads other than dead load and live load are not considered. Configurations of the bridges are different. Appropriate cross-section of girders are selected according to the material types. For fiber reinforced composite materials, box girder is used, for reinforced concrete, T-beam is selected; in addition, steel concrete composite section is another case.

Design methods are different from material to material. Reinforced concrete T-beam design is based on the 'Ultimate Strength Design' method. Steel concrete composite sections are designed according to the 'Load & Resistance Factor Design'. For composite materials, 'Elastic Design' is selected.

The results derived are as expected. Substantial weight saving is achieved by simply replacing concrete or steel with composite materials. This also results in many other advantages such as construction time, cost, foundation settlement and support requirements.


Master of Science
APA, Harvard, Vancouver, ISO, and other styles
9

Na, Gwang-Seok. "Load-displacement behavior of frame structures composed of fiber reinforced polymeric composite materials." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26699.

Full text
Abstract:
Thesis (Ph.D)--Civil and Environmental Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Dr. Leroy Z. Emkin; Committee Co-Chair: Dr. Abdul-Hamid Zureick; Committee Member: Dr. Dewey H. Hodges; Committee Member: Dr. Kenneth M. Will; Committee Member: Dr. Rami M. Haj-ali. Part of the SMARTech Electronic Thesis and Dissertation Collection.
APA, Harvard, Vancouver, ISO, and other styles
10

Hsu, Sheng-yuan. "On the prediction of compressive strength and propagation stress of aligned fiber-matrix composites /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Fiber Composite Materials"

1

International Inorganic Bonded Wood Fiber Composite Materials Conference (2nd 1990 University of Idaho). Inorganic Bonded Wood and Fiber Composite Materials. Edited by Moslemi Al. Madison, Wis: Forest Products Research Society, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

R, White S., ed. Stress analysis of fiber-reinforced composite materials. Boston, Mass: WCB McGraw-Hill, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fundamental principles of fiber reinforced composites. 2nd ed. Lancaster, PA: Technomic Pub. Co., 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fundamental principles of fiber reinforced composites. Lancaster: Technomic Pub. Co., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

M, Gammon Luther, ed. Optical microscopy of fiber reinforced composites. Materials Park, Ohio: ASM International, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hyer, Michael. Stress analysis of fiber-reinforced composite materials. Boston, Mass: McGraw-Hill, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Buckley, John D. Fiber-Tex 1992: The Sixth Conference on Advanced Engineering Fibers and Textile Structures for Composites : proceedings of a conference sponsored by the National Aeronautics and Space Administration ... [et al.] and held in Philadelphia, Pennsylvania, October 27-29, 1992. Hampton, Va: Langley Research Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Adams, Donald Frederick. Polymer matrix and graphite fiber interface study. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tredway, W. K. Carbon fiber reinforced glass matrix composites for satellite applications. East Hartford, Ct: United Technologies Research Center, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chern, E. James. Assessment of probability of detection of delaminations in fiber-reinforced composites. Greenbelt, Md: National Aeronautics and Space Administration, Goddard Space Flight Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Fiber Composite Materials"

1

Chawla, Krishan Kumar. "Carbon Fiber Composites." In Composite Materials, 150–63. New York, NY: Springer New York, 1987. http://dx.doi.org/10.1007/978-1-4757-3912-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chawla, Krishan K. "Carbon Fiber Composites." In Composite Materials, 252–77. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4757-2966-5_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chawla, Krishan K. "Carbon Fiber/Carbon Matrix Composites." In Composite Materials, 293–307. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-0-387-74365-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Das, Mahuya. "Bamboo Fiber-Based Polymer Composites." In Composite Materials, 627–45. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49514-8_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chawla, Krishan K. "Carbon Fiber/Carbon Matrix Composites." In Composite Materials, 297–311. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-28983-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sharma, Raghunandan, Kamal K. Kar, Malay K. Das, Gaurav K. Gupta, and Sudhir Kumar. "Short Carbon Fiber-Reinforced Polycarbonate Composites." In Composite Materials, 199–221. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49514-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Feng, Chunxiang, and Zengyong Chu. "Fiber Reinforcement." In Composite Materials Engineering, Volume 1, 63–150. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-5696-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sarath, P. S., Rakesh Reghunath, Józef T. Haponiuk, Sabu Thomas, and Soney C. George. "Tribology of Fiber Reinforced Polymer Composites: Effect of Fiber Length, Fiber Orientation, and Fiber Size." In Tribological Applications of Composite Materials, 99–117. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9635-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

El Messiry, Magdi. "Testing Methods for Composite Materials." In Natural Fiber Textile Composite Engineering, 283–352. Toronto : Apple Academic Press, 2017.: Apple Academic Press, 2017. http://dx.doi.org/10.1201/9781315207513-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Garoushi, Sufyan. "Fiber-Reinforced Composites." In Dental Composite Materials for Direct Restorations, 119–28. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60961-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Fiber Composite Materials"

1

Zhang, Dongdong, Douglas E. Smith, David A. Jack, and Stephen Montgomery-Smith. "Rheological Study on Multiple Fiber Suspensions for Fiber Reinforced Composite Materials Processing." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64498.

Full text
Abstract:
This paper studies the rheological properties of a semi-dilute fiber suspension for short fiber reinforced composite materials processing. For industrial applications, the volume fraction of short fibers could be large for semi-dilute and concentrated fiber suspensions. Therefore, fiber-fiber interactions consisting of hydrodynamic interactions and direct mechanical contacts could affect fiber orientations and thus the rate of fiber alignment in the manufacturing processing. In this paper, we study the semi-dilute fiber suspensions, i.e. the gap between fibers becomes closer, and hydrodynamic interactions becomes stronger, but the physical/mechanical contacts are still rare. We develop a three-dimensional finite element approach for simulating the motions of multiple fibers in low-Reynolds-number flows typical of polymer melt flow. We extend our earlier single fiber model to consider hydrodynamic interactions between fibers. This approach computes the hydrodynamic forces and torques on fibers by solving governing equations of motion in fluid. The hydrodynamic forces and torques result from two scenarios: gross fluid motion and hydrodynamic interactions from other fibers. Our approach seeks fibers’ velocities that zero the hydrodynamic torques and forces acting on the fibers by the surrounding fluid. Fiber motions are then computed using a Runge-Kutta approach to update fiber positions and orientations as a function of time. This method is quite general and allows for solving multiple fiber suspensions in complex fluids. Examples with fibers having various starting positions and orientations are considered and compared with Jeffery’s single fiber solution (1922). Meanwhile, we study the effect of the presence of a bounded wall on fiber motions, which is ignored in Jeffery’s original work. The possible reasons why fiber motions observed in experiments align slower than those predicted by Jeffery’s theory are discussed in this paper.
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Xiang, Sara Shonkwiler, and Sara McMains. "Fiber Recognition In Composite Materials." In 2021 IEEE International Conference on Image Processing (ICIP). IEEE, 2021. http://dx.doi.org/10.1109/icip42928.2021.9506571.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bocquet, Jean Claud, Pierre Lecoy, and Didier Baptiste. "Optical sensors embedded in composite materials." In OE Fiber - DL tentative, edited by Richard O. Claus and Eric Udd. SPIE, 1991. http://dx.doi.org/10.1117/12.50180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Philen, Michael. "Bio-Inspired Active Fiber Composite Pumps." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-8077.

Full text
Abstract:
Squid are the fastest aquatic invertebrates through jetting locomotion. This done through a mantle that quickly compresses an internal fluid, forcing fluid out through a funnel. The squid mantle has a complex collagen fiber and muscular system and squid propulsion is primarily done through circumferential muscles (90°) contracting around the mantel, forcing fluid out of the mantel. However, jetting is also increased through elastic energy stored in the helically-wound IM-1 collagen fibers, which have been measured between 28° to 32° in different species of squid. Inspired by the muscular and collagen fiber configuration found in the squid mantel, new composite pumps with active fibers oriented at precise angles around a cylindrical tube are proposed. An analytical model of the active fiber composite pump is developed. Results show that maximum pumping power and efficiency is achieved with a wind angle of 90° and a matrix modulus that is equal to the fiber modulus.
APA, Harvard, Vancouver, ISO, and other styles
5

Casalotti, Arnaldo, Krishna C. Chinnam, and Giulia Lanzara. "Self-Adaptable Carbon Fiber Composite." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-8058.

Full text
Abstract:
This article illustrates an approach to develop innovative smart materials based on carbon fiber composites. The proposed approach relies on the use of ultra-light strain sensors that are embedded into the composite and are adopted to monitor in real-time the actual material configuration. Such sensors are composed of electrospun PVDF fibers that exploit piezoelectricity to identify strain and thanks to their extreme lightweight can easily be embedded within the composite layers without affecting the structural integrity. On the other hand, the composite is equipped with a system of internal distributed heaters that can locally and globally vary the composite temperature. Since the adopted epoxy has a considerable temperature-dependent behaviour, it is possible to control its stiffness and thus to control the structural frequencies and damping. By coupling the sensing system with the control system, the structural properties are tuned to match prescribed working conditions, thus optimizing the performance of the proposed smart system. The proposed approach is investigated experimentally by manufacturing prototypes of the smart composite and by performing multiple tests to study the material response and evaluate the obtained performance.
APA, Harvard, Vancouver, ISO, and other styles
6

Naaman, Antoine E. "Fiber reinforced concrete: five decades of progress." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.02.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Xin, Anyong Qing, Yeow Beng Gan, and Yuan Ping Feng. "Effective Parameters of Fiber Composite Materials." In Proceedings of the Symposium F. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812704344_0006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Alford, Lorenleyn de L. H., Sidnei Paciornik, José R. M. d’Almeida, Marcos H. de P. Mauricio, and Haimon D. L. Alves. "Tridimensional characterization of epoxy matrix glass-fiber reinforced composites." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.05.05.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Braver, Chad, Matthew Tumey, Adam Harlow, and Qingyou Han. "The Effects of Ultrasonic Treatment on Fiber-Reinforced Composite Materials." In ASME 2009 International Manufacturing Science and Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/msec2009-84149.

Full text
Abstract:
The mechanical properties of fiber-reinforced composite materials are highly dependent on proper saturation of the resin within the reinforcement fibers. The research evaluates the effect of ultrasonic treatment during composite curing, in an effort to increase interlaminar bonding strength, lower void content, and improve the matrices ability to transfer stresses to the reinforcement fiber. The testing methods that were performed evaluated the effects or the ultrasonic treatment on the specimen in three point bending, and shear between layers of the matrix. The mechanical properties and the microstructure of the test specimen are discussed.
APA, Harvard, Vancouver, ISO, and other styles
10

Datta, Saurabh, Goutham R. Kirikera, Mark J. Schulz, and Mannur J. Sundaresan. "Active fiber composite continuous sensors." In Smart Materials, Structures, and Systems, edited by S. Mohan, B. Dattaguru, and S. Gopalakrishnan. SPIE, 2003. http://dx.doi.org/10.1117/12.514679.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Fiber Composite Materials"

1

Norris, Jr., Robert E., and Hendrik Mainka. Carbon Fiber Composite Materials for Automotive Applications. Office of Scientific and Technical Information (OSTI), June 2017. http://dx.doi.org/10.2172/1394272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Reyes, Karla Rosa, Karla Rosa Reyes, Adriana Pavia Sanders, Lee Taylor Massey, Corinne Hagan, Donald Ward, Elizabeth Ann Withey, Jeffery M. Chames, and Timothy Briggs. Investigations into Moisture Diffusion of Fiber Reinforced Composite Materials. Office of Scientific and Technical Information (OSTI), August 2018. http://dx.doi.org/10.2172/1466893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Haberman, K. S., J. G. Bennett, and Cheng Liu. The dynamic inelastic behavior in fiber reinforced composite materials. Office of Scientific and Technical Information (OSTI), March 1997. http://dx.doi.org/10.2172/464153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Udd, Eric, Mike Winz, Stephen Kreger, and Dirk Heider. Failure Mechanisms of Fiber Optic Sensors Placed in Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, January 2005. http://dx.doi.org/10.21236/ada444111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rudd, R., A. van Buuren, J. Florando, H. Ishii, E. Withey, P. Wozniakiewicz, K. Fisher, and B. Macintosh. Microcracking Study of Carbon Fiber Composite Materials for Starshade Petals. Office of Scientific and Technical Information (OSTI), June 2012. http://dx.doi.org/10.2172/1077194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

R.G. Quinn. Thermal Diffusivity and Conductivity in Ceramic Matrix Fiber Composite Materials - Literature Study. Office of Scientific and Technical Information (OSTI), May 2000. http://dx.doi.org/10.2172/821297.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lawrence, C. M., D. V. Nelson, J. R. Spingarn, and T. E. Bennett. Measurement of process-induced strains in composite materials using embedded fiber optic sensors. Office of Scientific and Technical Information (OSTI), May 1996. http://dx.doi.org/10.2172/226060.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bank, Lawrence C., Anthony J. Lamanna, James C. Ray, and Gerardo I. Velazquez. Rapid Strengthening of Reinforced Concrete Beams with Mechanically Fastened, Fiber-Reinforced Polymeric Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, March 2002. http://dx.doi.org/10.21236/ada400415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Janke, C. J. Structure-Processing-Property Relationships at the Fiber-Matrix Interface in Electron-Beam Cured Composite Materials. Office of Scientific and Technical Information (OSTI), November 1998. http://dx.doi.org/10.2172/2732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Simunovic, S., and T. Zacharia. Application of high performance computing to automotive design and manufacturing: Composite materials modeling task technical manual for constitutive models for glass fiber-polymer matrix composites. Office of Scientific and Technical Information (OSTI), November 1997. http://dx.doi.org/10.2172/10115294.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Fiber Composite Materials' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography