Log in

Relevant bibliographies by topics / Fiberglass shell

Contents

Journal articles
Dissertations / Theses
Conference papers

Academic literature on the topic 'Fiberglass shell'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fiberglass shell.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Fiberglass shell"

1

Pustovoitova, O. M., О. А. Gvozdiuk, S. M. Kamchatna, L. V. Trykoz, and A. S. Zvierieva. "RESEARCH OF DEFORMATION AND STRENGTH CHARACTERISTICS OF CONCRETE COLUMNS WITH COMPOSITE REINFORCEMENT." Modern construction and architecture, no. 11 (March 26, 2025): 68–76. https://doi.org/10.31650/2786-6696-2025-11-68-76.

Full text

Abstract:

The article presents the results of experimental studies on the load-bearing capacity of concrete specimens reinforced with a fiberglass shell under axial loading. Cylindrical concrete specimens were reinforced with strip fiberglass reinforcement (SFRP) using a developed winding technology and layer-by-layer bonding with a polymer binder. The main focus is on studying the influence of lateral pressure, created by the fiberglass shell, on the strength and deformation characteristics of concrete. The experiments demonstrated that the use of a fiberglass shell significantly increases the failure

APA, Harvard, Vancouver, ISO, and other styles

2

Paska, Adhi, Yusrizal Yusrizal, Maman Hermawan, and Mochamad Idnillah. "Tensile and Flexural Strength Fiberglass Mixed Green Mussel Shell Powder for Fishing Vessel Size below 5 GT." Journal La Lifesci 6, no. 2 (2025): 118–29. https://doi.org/10.37899/journallalifesci.v6i2.2163.

Full text

Abstract:

Green mussel (Perna viridis) is a marine organism that is widely cultivated and considered a leading commodity in the fisheries sector. The increase in mussel production has resulted in a significant amount of shell waste. Improperly managed mussel shell waste can have a negative impact on the environment. However, green mussel shell waste has great potential for reuse, one of which is as a composite material in fiberglass manufacturing. The high calcium content in mussel shells can serve as an additional reinforcement in fiberglass composites. The wood crisis as a raw material for boat constr

APA, Harvard, Vancouver, ISO, and other styles

3

Avramov, Kostiantyn V., Maryna V. Chernobryvko, Volodymyr V. Kombarov, Sergiy I. Plankovskyy, and Yevgen V. Tsegelnyk. "Deformation of Threaded Metal – Composite Couplings Under the Action of Gas-Dynamic Loads." Journal of Mechanical Engineering 27, no. 4 (2024): 31–39. https://doi.org/10.15407/pmach2024.04.031.

Full text

Abstract:

The combination of metal and composite in threaded couplings increases the reliability of the structure operating under conditions of intensive internal pressure. Strength analysis of threaded metal – composite couplings based on the application of modern finite element modeling methods at the stage of design documentation development allows to create more efficient structures that better meet the operational requirements. The strength of threaded couplings of cylindrical shells made of composite material and metal under the action of gas-dynamic internal pressure is analyzed in this paper. A

APA, Harvard, Vancouver, ISO, and other styles

4

Mosiyuk, Victoriya, Sergei Bukharov, and Aleksey Baranov. "Manufacture of Molding Tooling Based on TEIS-53 Heat-Resistant Resin." Key Engineering Materials 910 (February 15, 2022): 351–56. http://dx.doi.org/10.4028/p-st7n2q.

Full text

Abstract:

The present paper considers the manufacturability of polymer composite material tooling intended for molding and bonding of complex curvature honeycomb sandwich structures. The tooling structure consists of inner and outer shells and glass-fiber-reinforced honeycomb core placed between them. The inner shell is glass-fiber-reinforced plastic based on TEIS-53 molten heat-resistant epoxy-bismaleimide resin and Т-10-14 structural fiberglass.

APA, Harvard, Vancouver, ISO, and other styles

5

Abdulla, Fadhel Abbas, M. S. Qasim, and Ahmed Ali Farhan Ogaili. "Influence Eggshells powder additive on thermal stress of fiberglass/polyester composite tubes." IOP Conference Series: Earth and Environmental Science 877, no. 1 (2021): 012039. http://dx.doi.org/10.1088/1755-1315/877/1/012039.

Full text

Abstract:

Abstract In this study, the influences of eggshell powder application on random fiberglass/polyester composite pipes thermal stresses were investigated experimentally and numerically. The experimental part involved industrializing tube samples which are Egg Shell Powder with Polyester at 50% volume fraction.(E50), Random Fiberglass with plyester at 50% volume fraction (F50) and Egg Shell Powder with Random Fiberglass with Polyester at 50% volume fraction (E25F25). Resin molding procedure and experimental rig design to study how tube samples are faced with thermal loads. Pipes are made with (95

APA, Harvard, Vancouver, ISO, and other styles

6

Shendrik, V. A. "RESEARCH OF GFRP SHELL CONFINED CONCRETE COLUMNS BEHAVIOR UNDER AXIAL COMPRESSION." Russian Journal of Building Construction and Architecture, no. 2(54) (May 11, 2022): 50–60. http://dx.doi.org/10.36622/vstu.2022.54.2.005.

Full text

Abstract:

Statement of the problem. The influence of external GFRP (glass-fiber-reinforced-plastic) shell, with different physicomechanical longitudinal and transverse properties on increasing the strength of the concrete core is investigated.Results. The article presents the results of experimental investigations of the load-bearing capacity to evaluate the effectiveness of using a solid fiberglass outer shell as a reinforcement of a concrete column. The results of the study has allowed us to establish the major factor that significantly affects the load-bearing capacity of a hybrid column with a compo

APA, Harvard, Vancouver, ISO, and other styles

7

Knotek, V., J. Červinka, and Z. Křenková. "Survey and restoration of outdoor glass reinforced polyester sculptures." Koroze a ochrana materialu 63, no. 3 (2019): 130–37. http://dx.doi.org/10.2478/kom-2019-0017.

Full text

Abstract:

Abstract The beginning of the use of polyester resins for artistic work date back to the late 1950s. Initially, resins were supposed to temporarily replace and imitate traditional but more expensive sculptural materials (stone, bronze). Later, original, especially fiberglass works were created, where the laminate formed a shell connected to the internal supporting steel structure. Until now, only part of the exterior works of art made of polyester resins have been survived. Although polyester resins are considered to have good weather resistance, most exterior sculptures exhibit more or less s

APA, Harvard, Vancouver, ISO, and other styles

8

Barry, Christopher D. "CNC Enabled Wood/Metal Composite Construction of (Relatively) High Performance Sailing Yachts." Journal of Sailing Technology 7, no. 01 (2022): 152–85. http://dx.doi.org/10.5957/jst/2022.7.8.152.

Full text

Abstract:

One problem for high performance yachts is to produce a light enough, strong enough structure. Modern fiberglass “composite” construction achieves this, but at substantial cost for the molds so fiberglass is expensive for limited construction. However, “composite” is a combination of any two materials. Before fiberglass, “composite” comprised wood planking over metal framing. Prince Edward’s, (King Edward VII) yacht Britannia was pine over steel and was a very successful racer. This system is used by a few builders of large, mainly “revival” design yachts, but it is feasible for many boat type

APA, Harvard, Vancouver, ISO, and other styles

9

Tärno, Ülo A., Ernest Z. Zhukovski, and Olga V. Shevtshenko. "Composite Suspended Shells on Cyclical Plan." International Journal of Space Structures 10, no. 4 (1995): 243–48. http://dx.doi.org/10.1177/026635119501000407.

Full text

Abstract:

The problems connected with the research of rational types of reinforced concrete shell roofs satisfying the demands of city-planning, functional, economic and technological requirements were under investigation during the last decades in TTU and MNIITEP. This paper suggests the use of composite suspended polygonal shells. The structures consist of the curvilinear plates and systems of radial two-level supporting elements. 5 and 12 angle structures were created for the investigations of stress-strain conditions of the complex roofs. The experiments were carried out on fiberglass plastic models

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, Zhi Wei, Yan Fu Wang, and Bai Qin. "Analysis of Fiberglass Winding Angle on Natural Frequency of Cylindrical Shell with Symmetric Boundary Conditions." Advanced Materials Research 765-767 (September 2013): 106–9. http://dx.doi.org/10.4028/www.scientific.net/amr.765-767.106.

Full text

Abstract:

In order to obtain approximate solution of natural frequencies for the free vibration of anisotropic circular cylindrical shells made of GFRP (glass fiber-reinforced plastic) with symmetric boundary conditions, Loves theory and energy method are used. Computation results show that the fundamental natural frequency comes from different vibration modes while the winding angle varies, the effect of number of axial half waves is stronger than number of circumferential waves on natural frequency of free vibration of anisotropic circular cylindrical shell.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Fiberglass shell"

1

Стрелец, Ганна Володимирівна, Анна Владимировна Стрелец, Hanna Volodymyrivna Strelets та Д. А. Фишер. "Программа расчета несущей способности стеклопластиковой оболочки". Thesis, Изд-во СумГУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/6341.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lee, Chien-Hsing, and 李建興. "Polyurethane coatings and application skills-Fiberglass shell." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/222smg.

Full text

Abstract:

碩士<br>東方設計學院<br>文化創意設計研究所<br>103<br>The purpose of this study is to analyze the three-dimensional works, such as glass fiber. In the surface covering material of a typical application is applied to the difference compared to polyurethane coating is applied to the replacement of reference.Research focuses on the benefits and show a significant impact during the experiment. The effect of a systematic approach, and continue to accumulate knowledge, summed up the organization to collect and analyze empirical research methods, the formation of an effective description.Experiments and applications m

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Fiberglass shell"

1

Wells, Hardin T. "An End-User’S Failure Analysis of a Dual Laminate Steam Stripping Column." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06547.

Full text

Abstract:

Abstract This paper presents an end-user’s root cause failure analysis of a fluorinated ethylene propylene (FEP) lined fiberglass reinforced plastic (FRP) steam-stripping column. The column stripped low levels of organics from an acidic aluminum chloride stream, and failed via through-wall weeping at a nozzle-to-shell joint in less than 18 months of service. In-depth visual and microscopic examination identified several root causes, the most significant of which were lack of fusion and improper weld technique at the FEP lining butt welds. Corrective recommendations for addressing the deficienc

APA, Harvard, Vancouver, ISO, and other styles

2

DeCola, Dale W., and Jeffrey Eisenman. "An Investigation of FRP Tank Stiffness for Nozzle Load Evaluation." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01715.

Full text

Abstract:

Abstract The definition of equipment connections for pipe flexibility analysis can be a challenge for many design engineers. Some typical assumptions for the stiffness of connections can be extremely conservative. There are some established design methods for determining steel tank nozzle stiffness, which are based on the assumptions of typical homogeneous materials. Due to the varied shell construction of Fiberglass Reinforced Plastic (FRP), these established design methods are not readily applicable for FRP tanks. This paper investigates the modification of these design methods for FRP tanks

APA, Harvard, Vancouver, ISO, and other styles

3

Julius, William H., John G. Johnson, and Severino Bigante. "Placement of Thermocouples for Post Curing Operations." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00547.

Full text

Abstract:

Abstract This paper describes the application and design of thermocouple placement for post curing operations which require elevated cure temperature, such as some fiberglass reinforced plastic (FRP) process equipment. The principles of thermocouples, such as the Seebeck Effect, the Peltier Effect, and the Thomson Effect, are discussed in detail. The advantages and disadvantages of thermocouples will be reviewed. In order to achieve good control over the temperature during the post curing process, the sensor must be correctly placed with respect to the work and heat source. Thermocouples shoul

APA, Harvard, Vancouver, ISO, and other styles

4

Cowley, Terry W., and Duane W. Poland. "Repair of a 50 Foot Diameter FRP Hydrochloric Acid Storage Tank." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10041.

Full text

Abstract:

Abstract A 50 foot (15.2 m) diameter by 36 foot (11 m) straight shell field erected fiberglass reinforced plastic (FRP) tank containing 37% hydrochloric acid developed a leak at its third module seam, approximately 18 feet (5.5 m) off the ground. The tank is made up of four filament wound horizontal sections or modules that are 50 feet (15.2 m) in diameter by 8 feet (2.4 m) high. The leak occurred in a vertical crack at the joint between the second and third modules. This paper discusses interesting findings, fabrication issues, and describes the repair techniques used to successfully return t

APA, Harvard, Vancouver, ISO, and other styles

5

Cowley, Terry W. "A Case History of a Large FRP Tank Fabricated in a TIGHT Place." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11368.

Full text

Abstract:

Abstract A primary neutralization tank made of FRP (fiberglass reinforced plastic) was 30 years old and leaking from somewhere at the bottom. The vessel was open top with an 18 foot (5.5 m) diameter and 20.5 foot (6.25 m) straight shell. The vessel was surrounded by a metal structure, which supports the vessel's agitator, as well as, housing covering equipment used for the primary and secondary neutralization vessels. The vessel had to be replaced, but since the vessel was the first one to neutralize the waste stream, it could not be out of service for too long. The cost of removing the metal

APA, Harvard, Vancouver, ISO, and other styles

6

Newberry, Alfred L. "A Case History of the Use of Advanced Software for the Design of a Large FRP Vessel." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00541.

Full text

Abstract:

Abstract The dramatic increase in the power of desk top personal computers coupled with advances in relatively low priced software (as compared to similar software for mainframes) has made it possible for the designer of fiberglass reinforced plastic (FRP) vessels to use advanced techniques which at one time were restricted to aircraft, spacecraft and military projects. A large FRP scrubber vessel 25 ft 7 inch (7.8 m) in diameter, a shell length of 79 ft 5 inch (24.2 m) and a skirt length of 14 ft 9 inch (4.5 m) was designed in accordance with ASME RTP- 1 Subpart 3B with advanced computer soft

APA, Harvard, Vancouver, ISO, and other styles

7

Granderson, David. "Endurance Regression Testing Method to Obtain a Hydrostatic Design Basis for Fiberglass Pipe." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09208.

Full text

Abstract:

Abstract After decades of use, it is becoming evident that the standard practice ASTM D2992 and referenced Standard test Method ASTM D1598 may not be producing the intended results.(1) 1 2 Like the current ASTM practices, the goal of “Endurance Regression testing” is to obtain the Hydrostatic Design Basis for “Fiberglass” (Glass Reinforced Thermosetting Resin Pipe, Fittings, and Joints). “Endurance Regression Testing” will similarly measure, plot, and extrapolate the long term hydrostatic strength (LTHS) of fiberglass components upon exposure to a controlled and constant set of aging condition

APA, Harvard, Vancouver, ISO, and other styles

8

Fonda, A. F. "The Professional Use of Design Fundamentals for FRP Applications." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88173.

Full text

Abstract:

Abstract Fiberglass Reinforced Plastics (FRP) is slowly taking its place with other traditional materials of construction for corrosion service. Specifications written for the industry have standardized much of what is required to produce good FRP products with longevity and safety as their main criteria. They still leave fabrication techniques to the supplier and his ingenuity. Design requirements for critical equipment are being advanced with equations and data which will standardize most critical areas. As research unravels more of the secrets of FRP laminates, equations specifically design

APA, Harvard, Vancouver, ISO, and other styles

9

Santoso, Deri Teguh, Iwan Nugraha Gusniar, Rianita Puspa Sari, and Galih Haryudwitomo. "Optimizing mechanical properties of helmet shell base materials through the integration of fiberglass, carbon fiber, and aramid composites." In INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND EMERGING TECHNOLOGIES (ICOMEET2023). AIP Publishing, 2025. https://doi.org/10.1063/5.0243071.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ali, A., G. Radhakrishnan, and A. AlKhouly. "Worldwide's First Time Successful Hydraulic Fracture Operation Through GRE Composite Fiberglass Lined API 5CT Carbon Steel String." In ADIPEC. SPE, 2023. http://dx.doi.org/10.2118/216979-ms.

Full text

Abstract:

Abstract In an attempt that is considered the first in well stimulation techniques by means of Hydraulic Fracture practice in GRE lined tubing, Badr Petroleum Company, BAPETCO (A SHELL Joint Venture in Egypt) has a successful experience to report. The company performed a hydraulic fracture operation through one of its water injection well installations completed with GRE (fiberglass) lining. The need for fiberglass tubular lining raised from the fact that the injected water in Neag-1 field is saturated with 1000 ppb of oxygen content and a range between 60,000 to 80,000 of salinity which led t

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!