Academic literature on the topic 'Fibra WLS'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Fibra WLS.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Fibra WLS"

1

Beck, M., K. H. Brenzinger, W. Brückner, et al. "A scintillating tile hodoscope with WLS fibre readout." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 355, no. 2-3 (1995): 351–58. http://dx.doi.org/10.1016/0168-9002(94)01141-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

De Blas, J. Carlos, Pablo Ferrer, Carlos Alberto Rodríguez, et al. "Nutritive value of citrus co-products in rabbit feeding." World Rabbit Science 26, no. 1 (2018): 7. http://dx.doi.org/10.4995/wrs.2018.7699.

Full text
Abstract:
Pulps from different citrus fruits are relevant agro-industrial co-products in the Mediterranean area in terms of amounts produced and availability. Moreover, part of the product is dehydrated, which increases its interest in monogastric species such as rabbits. Seventy eight samples from various Spanish producers using several types of fresh fruits (orange, tangerine, lemon and pomelo) and different processing methods of orange and tangerine samples (either fresh or dried after adding Ca(OH)<sub>2</sub>) were analysed for their chemical composition and <em>in vitro</em&gt
APA, Harvard, Vancouver, ISO, and other styles
3

Kadi, S. A., M. Ouendi, C. Bannelier, M. Berchiche, and T. Gidenne. "Nutritive value of sun-dried common reed (Phragmites australis) leaves and its effect on performance and carcass characteristics of the growing rabbit." World Rabbit Science 26, no. 2 (2018): 113. http://dx.doi.org/10.4995/wrs.2018.5217.

Full text
Abstract:
The nutritive value and potential use of sun-dried common reed (<em>Phragmites australis</em>) leaves (CRL), for growing rabbits was studied by comparing 3 diets (regression method) containing an increasing incorporation rate of CRL: 0% (control, CRL0), 15% (CRL15) and 30% (CRL30) in substitution for the control diet (356 g neutral detergent fibre (NDF) and 197 g crude protein (CP)/kg). Three groups of 37 rabbits (individually caged) were fed the 3 diets <em>ad libitum</em> from weaning (35 d, mean weight: 722±142 g) to 77 d of age. The faecal digestibility of the diets
APA, Harvard, Vancouver, ISO, and other styles
4

Ayodele, S. O., O. D. Oloruntola, and J. O. Agbede. "Effect of Alchornea cordifolia leaf meal inclusion and enzyme supplementation on performance and digestibility of rabbits." World Rabbit Science 24, no. 3 (2016): 201. http://dx.doi.org/10.4995/wrs.2016.3933.

Full text
Abstract:
<p>A feeding trial was conducted to study the performance, digestibility and health status of weaner rabbits fed diets including Alchornea cordifolia leaf meal (ALM: 18% crude protein [CP] and 12.9% crude fibre) and supplemented with a multi-enzyme additive (cellulase, xylanase, β-glucanase, α-amylase, protease, lipase). Six experimental diets were arranged factorially: 3 levels of ALM (0, 5 and 10% substituting palm kernel cake: 16.3% CP and 39.1% neutral detergent fibre) combined with 2 levels of enzyme supplementation (0 and 0.35 g/kg). One hundred and eighty healthy, 5-wk-old weaner
APA, Harvard, Vancouver, ISO, and other styles
5

Dorbane, Zahia, Si Ammar Kadi, Dalila Boudouma, et al. "Nutritive value of two types of olive cake (Olea europaea l.) for growing rabbit." World Rabbit Science 27, no. 2 (2019): 69. http://dx.doi.org/10.4995/wrs.2019.11499.

Full text
Abstract:
<p>The nutritive value of 2 types of sun-dried olive cake (OC), extracted traditionally (COC) or with a 3-phase olive cake (TPOC), was studied for the growing rabbit. Four diets containing 10 or 20% of COC (COC10 and COC20) or of TPOC (TPOC10 and TPOC20) in substitution for a basal diet were compared to a control diet without OC (OC0). Five groups of 12 rabbits were fed one of the 5 diets ad libitum from weaning (35 d) to 46 d of age. The faecal digestibility was individually measured between 42 and 46 d of age. COC and TPOC are high fibre and lignin sources, with 707 and 787 g/kg dry ma
APA, Harvard, Vancouver, ISO, and other styles
6

Paiva, Francisco Italo Gomes, Marcelo Tavares Gurgel, Francisco De Assis de Oliveira, Lucas Ramos Da Costa, Andygley Fernandes Mota, and Herminio Sabino de Oliveira Junior. "QUALIDADE DA FIBRA DO ALGODOEIRO BRS VERDE IRRIGADO COM ÁGUAS DE DIFERENTES NÍVEIS SALINOS." IRRIGA 1, no. 1 (2018): 209. http://dx.doi.org/10.15809/irriga.2016v1n1p209-220.

Full text
Abstract:
QUALIDADE DA FIBRA DO ALGODOEIRO BRS VERDE IRRIGADO COM ÁGUAS DE DIFERENTES NÍVEIS SALINOS FRANCISCO ITALO GOME PAIVA1; MARCELO TAVARES GURGEL2; FRANCISCO DE ASSIS DE OLIVEIRA3 ANDYGLEY FERNANDES MOTA4;LUCAS RAMOS DA COSTA 5; HERMINIO SABINO DE OLIVEIRA JUNIOR6 1Engenheiro Agrônomo, Mestrando em Manejo de solo e agua – UFERSA/RN, italo-gp@hotmail.com;2 Engenheiro Agrônomo, Prof. Doutor, Manejo solo e agua – UFERSA/RN, marcelo.tavares@ufersa.edu.br;3Engenheiro Agrônomo, Prof. Doutor, Manejo solo e agua – UFERSA/RN, thikaoamigao@ufersa.edu.br;4Engenheiro Agrônomo, Mestre, Doutorando, UFCG – Camp
APA, Harvard, Vancouver, ISO, and other styles
7

De Blas, J. C., C. A. Rodriguez, F. Bacha, R. Fernandez, and R. Abad-Guamán. "Nutritive value of co-products derived from olivecake in rabbit feeding." World Rabbit Science 23, no. 4 (2015): 255. http://dx.doi.org/10.4995/wrs.2015.4036.

Full text
Abstract:
<p>Olive cake is one of the main agro-industrial co-products in the Mediterranean area of Spain, with high availability almost all year round. In addition, most of the product is dehydrated, which increases its interest in monogastric species such as rabbits. Nineteen samples from various Spanish oil mills using different processing methods were analysed for their chemical composition and in vitro digestibility. The average composition was [in dry matter (DM) basis]: ash (9.64%), neutral detergent fibre (52.0%), acid detergent fibre (36.8%), acid detergent lignin (19.1%), crude protein (
APA, Harvard, Vancouver, ISO, and other styles
8

Quilhó, Teresa, Jorge Gominho, and Helena Pereira. "ANATOMICAL CHARACTERISATION AND VARIABILITY OF THE THISTLE CYNARA CARDUNCULUS IN VIEW OF PULPING POTENTIAL." IAWA Journal 25, no. 2 (2004): 217–30. http://dx.doi.org/10.1163/22941932-90000362.

Full text
Abstract:
The thistle Cynara cardunculus L. is an herbaceous perennial with high productivity that is harvested annually and is a potential fibre crop for paper pulp production. The anatomical variation within stalks was studied (base, middle and top) and compared in C. cardunculus plants at different development phases. The stalk of C. cardunculus includes an epidermis, cortex and a central cylinder with fibro-vascular bundles with phloem, xylem and a fibrous sheath that is variable in arrangement and size within and between plants.At harvest, the pith represents 37% of the stalk transectional area and
APA, Harvard, Vancouver, ISO, and other styles
9

Taha, Emad, Samia Hekal, and Ahmed Ibrahim Nasr. "Evaluating skin quality of some rabbit breeds under Egyptian conditions." World Rabbit Science 25, no. 2 (2017): 193. http://dx.doi.org/10.4995/wrs.2017.6652.

Full text
Abstract:
Histological skin parameters in addition to mechanical and chemical properties of chrome tanned rabbits’ furs were determined in this study to evaluate and compare the quality of some rabbit breeds. Seventy-nine male rabbits aged 3 mo of New Zealand White (NZW, n=27), Rex (RX, n=24) and Gabaly (GB, n=28) were used. Results showed that GB skins had the highest values in skin weight (P<0.01) and area (P<0.05) followed by NZW and RX skins, respectively. Moreover, NZW skins differed in histological structure from the other 2 breeds, as total thickness and thickness of papillary and h
APA, Harvard, Vancouver, ISO, and other styles
10

Guermah, H., L. Maertens, and M. Berchiche. "Nutritive value of brewers’ grain and maize silage for fattening rabbits." World Rabbit Science 24, no. 3 (2016): 183. http://dx.doi.org/10.4995/wrs.2016.4353.

Full text
Abstract:
<p>Specific knowledge of the nutritive value of raw materials is fundamental to formulate balanced diets for rabbits and allows greater use of by-products and non-conventional feedstuffs. This paper examines the feeding value of sun-dried brewers’ grain and maize silage (whole plant) for fattening rabbits. Twenty-four individually caged 8-wk-old rabbits were used to determine the digestibility. Both wet products were sun-dried and ground before being incorporated into a basal diet. The inclusion level at the expense of all basal ingredients amounted to 30%. Basal diet and both experiment
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Fibra WLS"

1

Spurio, Eleonora. "Misura della raccolta di luce in una striscia di scintillatore plastico letta con fotomoltiplicatori al silicio." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amslaurea.unibo.it/14091/.

Full text
Abstract:
In questo lavoro è stata studiata la risposta a particelle al minimo di ionizzazione di un rivelatore, che sarà utilizzato per l'identificazione di muoni in SHIP (Search for HIdden Particles), esperimento proposto al CERN e ancora in fase di approvazione. Il rivelatore è basato su una striscia di scintillatore lunga tre metri accoppiata ad una fibra ottica Wave Lenght Shifter (WLS) e letta da due fotomoltiplicatori al Silicio (SiPM), posti ad entrambi i capi. Lo scopo principale del lavoro è la misura della raccolta di luce del rivelatore e la valutazione della lunghezza di attenuazione della
APA, Harvard, Vancouver, ISO, and other styles
2

Paladino, Mattia. "Test su un prototipo di rivelatore per la misura di sezione d’urto del neutrino elettronico." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/16826/.

Full text
Abstract:
Il neutrino è una particella fondamentale del Modello Standard, è stata scoperta nel 1956 e col passare degli anni si venne a conoscenza del fatto che questi sono caratterizzati da una rispettiva antiparticella e da tre tipi di sapore. La fisica dei neutrini è tuttavia ancora ricca di incomprensioni: molte delle proprietà che descrivono queste particelle risultano ancora sconosciute. Il progetto ENUBET propone un’iniziativa con lo scopo di far luce su alcuni dei misteri che circondano le nostre conoscenze sui neutrini e sarà il protagonista di questo elaborato. Nel primo capitolo si farà un’
APA, Harvard, Vancouver, ISO, and other styles
3

Aitomäki, Yvonne. "Online fibre property measurements : foundations for a method based on ultrasound attenuation /." Luleå : Luleå University of Technology, 2009. http://pure.ltu.se/ws/fbspretrieve/2743474.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Meisterjahn, Rainer Josef. "“Everything Was Different”: An Existential Phenomenological Investigation of US Professional Basketball Players’ Experiences Overseas." 2011. http://trace.tennessee.edu/utk_graddiss/1001.

Full text
Abstract:
Globalization in the sports world is a phenomenon that has received considerable attention in the sport studies literature (Maguire, 1994, 2004). A significant aspect of globalization is labor migration in professional sports, which has been investigated extensively in recent years (e.g., Magee & Sugden, 2002; Takahashi & Horne, 2006). Basketball is one sport that has been discussed in this context (Falcous & Maguire, 2005). The sports encounters of athletes in foreign cultures are often diverse and entail differing pressures, rewards, and interdependencies (Falcous & Maguire, 2005). Players m
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Fibra WLS"

1

Fitzer, Erich. Carbon Fibres and Their Composites: Based on papers presented at the International Conference on Carbon Fibre Applications, Sāo José dos Campos (SP), Brazil, 5-9 December 1983, which was jointly sponsored by the Centro Técnico Aerospacial, the United Nations Industrial Development Organization and the United Nations Financing System for Science and Technology for Development. Springer Berlin Heidelberg, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Parthasarathi, Prasannan, and Giorgio Riello. From India to the World: Cotton and Fashionability. Edited by Frank Trentmann. Oxford University Press, 2012. http://dx.doi.org/10.1093/oxfordhb/9780199561216.013.0008.

Full text
Abstract:
Since at least the nineteenth century, cotton has been the most important textile fibre in the world. In 1913, cotton accounted for 80 per cent of global fibre consumption: cotton consumption for textile uses was about 4 billion kilograms, while that of wool, the second most important fibre, was about 700 million kilograms. In 1990, even after the rise of synthetic fibres, which accounted for 38 per cent of global fibre use in textiles, cotton accounted for 48 per cent of world fibre share and wool had slumped to the low proportion of 4.9 per cent. The appeal of cotton lay in its fashionabilit
APA, Harvard, Vancouver, ISO, and other styles
3

Downes, GM, IL Hudson, CA Raymond, et al. Sampling Plantation Eucalypts for Wood and Fibre Properties. CSIRO Publishing, 1997. http://dx.doi.org/10.1071/9780643105287.

Full text
Abstract:
This book was written to help the forest industry assess wood quality by using non-destructive samples taken from specific points within a tree. It is the first compilation of research data on sampling of eucalypts, describing new methods and tools for rapid and cost-effective analysis.
 The book provides information needed to design a sampling program, obtain and process wood samples, and shows how to relate the data to an average tree value.
APA, Harvard, Vancouver, ISO, and other styles
4

Gerard, McMeel. Part IV Standards of Conduct, 12 Standards of Conduct for Investment Advice, Stockbroking, and Portfolio Management. Oxford University Press, 2014. http://dx.doi.org/10.1093/law/9780198705956.003.0012.

Full text
Abstract:
This chapter discusses the development of investor protection rules. Since the implementation of the Financial Services Act 1986 (the 1986 Act) there have been four major phases of regulatory rules for investor protection in the retail financial sector. First, under the 1986 Act (from 1988-1994) there was the regime comprising the regulatory rules of various self-regulation organisations, principally the Life Assurance and Unit Trust Regulatory Organisation (LAUTRO) and the Financial Intermediaries, Managers, and Brokers Regulatory Association (FIMBRA). Secondly, under the same legislation (fr
APA, Harvard, Vancouver, ISO, and other styles
5

Luckhurst, Roger, ed. Late Victorian Gothic Tales. Oxford University Press, 2009. http://dx.doi.org/10.1093/owc/9780199538874.001.0001.

Full text
Abstract:
He was a man of fairly firm fibre, but there was something in this sudden, uncontrollable shriek of horror which chilled his blood and pringled in his skin. Coming in such a place and at such an hour, it brought a thousand fantastic possibilities into his head...' The Victorian fin de siècle: the era of Decadence, The Yellow Book, the New Woman, the scandalous Oscar Wilde, the Empire on which the sun never set. This heady brew was caught nowhere better than in the revival of the Gothic tale in the late Victorian age, where the undead walked and evil curses, foul murder, doomed inheritance and
APA, Harvard, Vancouver, ISO, and other styles
6

Swash, Michael. Myology. Oxford University Press, 2015. http://dx.doi.org/10.1093/med/9780199658602.003.0012.

Full text
Abstract:
Diseases of muscle have become better understood by careful clinical observations, resulting in a clinically useful classification of the different groups of disorders e.g. inherited muscular dystrophies such as Duchenne muscular dystrophy, limb-girdle and metabolic myopathies, and myotonic disorders. A number of scientific approaches have determined the directions taken by this evolving classification. Understanding of the anatomy of the motor unit’s distribution in muscle transformed muscle pathology and muscle electrophysiology, and key to these pathological advances was the use of the hist
APA, Harvard, Vancouver, ISO, and other styles
7

Bocquet, Lydéric, David Quéré, Thomas A. Witten, and Leticia F. Cugliandolo, eds. Soft Interfaces. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198789352.001.0001.

Full text
Abstract:
Many of the distinctive and useful phenomena of soft matter come from its interaction with interfaces. Examples are the peeling of a strip of adhesive tape or the coating of a surface or the curling of a fibre via capillary forces or the electrically driven ow along a microchannel, or the collapse of a porous sponge. These interfacial phenomena are distinct from the intrinsic behaviour of a soft material like a gel or a microemulsion. Yet many forms of interfacial phenomena can be understood via common principles valid for many forms of soft matter. Our goal in organizing this school was to gi
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Fibra WLS"

1

Dritsos, Stephanos, and Dimitrios Baros. "Modification and Strengthening of a Characteristic Reinforced Concrete Building in Patras, Greece." In Case Studies on Conservation and Seismic Strengthening/Retrofitting of Existing Structures. International Association for Bridge and Structural Engineering (IABSE), 2020. http://dx.doi.org/10.2749/cs002.021.

Full text
Abstract:
<p>The design and application of strengthening measures aiming to effectively counter possible weaknesses related to the extensive architectural modification of a characteristic reinforced concrete building is discussed in this chapter. Several balconies were removed as part of the architectural interventions. Externally bonded reinforcement consisting of steel and fibre reinforced polymer laminates was applied as an “answer” to possible changes in flexural stress of selected structural elements in the immediate area of the demolitions. A unique anchorage system was also designed and applied as an answer to the loss of development length of the main reinforcement bars of selected beams due to the removal of their cantilever parts.</p>
APA, Harvard, Vancouver, ISO, and other styles
2

Kaur, Taranjit. "Fibro-osseous Lesions in the Maxillofacial Region." In Oral and Maxillofacial Surgery for the Clinician. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-1346-6_30.

Full text
Abstract:
AbstractFibro-osseous lesions have posed a diagnostic dilemma since the beginning when the first case was reported in the late nineteenth century. Since then, various lesions are included in this group, yet the understanding of the lesions remains obscure for the clinician/surgeon. The main reason for this is their histological resemblance with one another, where they all show varying degrees of healthy bone replaced by fibrous tissue and some amount of bone/cementum-like tissue intermingled in between. This chapter is written with the aim of simplifying these groups of bony lesions for its readers and highlighting the key idea of interdisciplinary approach in the management of these lesions where the oral pathologist along with radiologist and clinician plays a pivotal role in differentially diagnosing these lesions, for the maxillofacial surgeon to choose and perform her/his duty of managing them, rightfully, for their patients. The spectrum of these lesions has seen several changes during the course of history yet there is still ample scope for ambiguity in identification and classification of the lesions, hence the authors have chosen few most commonly encountered lesions in the Indian subcontinent, for the description and discussion.
APA, Harvard, Vancouver, ISO, and other styles
3

Riel, Stefanie, Mohammad Bashiri, Werner Hemmert, and Siwei Bai. "Computational Models of Brain Stimulation with Tractography Analysis." In Brain and Human Body Modeling 2020. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45623-8_6.

Full text
Abstract:
AbstractComputational human head models have been used in studies of brain stimulation. These models have been able to provide useful information that can’t be acquired or difficult to acquire from experimental or imaging studies. However, most of these models are purely volume conductor models that overlooked the electric excitability of axons in the white matter of the brain. We hereby combined a finite element (FE) model of electroconvulsive therapy (ECT) with a whole-brain tractography analysis as well as the cable theory of neuronal excitation. We have reconstructed a whole-brain tractogram with 2000 neural fibres from diffusion-weighted magnetic resonance scans and extracted the information on electrical potential from the FE ECT model of the same head. Two different electrode placements and three different white matter conductivity settings were simulated and compared. We calculated the electric field and second spatial derivatives of the electrical potential along the fibre direction, which describes the activating function for homogenous axons, and investigated sensitive regions of white matter activation. Models with anisotropic white matter conductivity yielded the most distinctive electric field and activating function distribution. Activation was most likely to appear in regions between the electrodes where the electric potential gradient is most pronounced.
APA, Harvard, Vancouver, ISO, and other styles
4

Solymar, Laszlo. "Optical Communications: The Beginning." In Getting the Message. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198863007.003.0012.

Full text
Abstract:
The first efforts by Alexander Graham Bell at optical communications by incoherent light are discussed. Those were very inefficient at the time but after the invention of the laser it was only a question of time when coherent optical communication will dominate the communications scene The beginning was slow because propagation both in air and in fibre waveguide was too large. Enormous efforts by the Corning Glass Works brought down the attenuation to a figure as low as a few dbs per kilometre making some further applications feasible. The next break-through was the invention of the fibre amplifier enabling the erection of long relay-free lines (maybe up to 10,000 km) possible range of applications was greatly extended by the invention of the fibre amplifier. Coherent light propagation in thin, single-mode fibres is discussed a very thin fibre is discussed. It is shown that an optical fibre can carry an enormous number of communication channels. The laser was invented just in time to help produce the signals, and it also became possible to produce pure enough glass fibres in which an optical signal could propagate with low attenuation. The invention of erbium-doped fibre amplifiers allowed them to be spread all over the world, including large number of lines under the oceans.
APA, Harvard, Vancouver, ISO, and other styles
5

Rast-Eicher, Antoinette. "In the Beginning was the Fibre." In Considering Creativity: Creativity, Knowledge and Practice in Bronze Age Europe. Archaeopress Publishing Ltd, 2018. http://dx.doi.org/10.2307/j.ctvndv8rw.13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sanguigno, Luigi, Marcello Antonio Lepore, and Angelo Rosario Maligno. "Characterization of Titanium Metal Matrix Composites (Ti-MMC) Made Using Different Manufacturing Routes." In Advances in Transdisciplinary Engineering. IOS Press, 2021. http://dx.doi.org/10.3233/atde210030.

Full text
Abstract:
The mechanical and morphological properties of the unidirectional metal matrix composite (MMC) in titanium alloy reinforced with continuous silicon carbide (SiC) fibres are investigated. The lay-up manufacturing process known as the Foil / Fibre (FF) lay-up was compared with the matrix-coated-fibre (CF) method which promises a better final shape of the reinforcing fibre net. Tensile tests were performed to measure mechanical performance of the manufactured MMCs both longitudinally and transversely respect to the direction of SiC fibres. Elastic behaviour of the investigated MMCs was assumed orthotropic and related to mechanical properties and spatial distribution of the MMC constituents: SiC fibres and Titanium (Ti) matrix. This was achieved using micromechanical modelling based on Finite Element (FE) calculations. FE micromechanical modelling was carried out on the Representative Elementary Volume (REV) of the MMC microstructure resolved by non-destructive analysis such as X-Ray tomography. The analysis carried out highlighted and justified mechanical performance difference between composite laminates containing the same amount of SiC reinforcement fibres for unit of volume but made following different manufacturing routes. To compute overall orthotropic behaviour of the MMC laminate, each constituent was assumed as an elastic isotropic heterogeneity during the averaging. This simplify assumption was validated by comparison with experimental data during the mechanical characterization of the investigated MMC composites.
APA, Harvard, Vancouver, ISO, and other styles
7

Wallace, Daniel J., and Janice Brock Wallace. "What is Fibromyalgia?" In All About Fibromyalgia. Oxford University Press, 2002. http://dx.doi.org/10.1093/oso/9780195147537.003.0007.

Full text
Abstract:
When the Arthritis Foundation tried to categorize the 150 different forms of musculoskeletal conditions in 1963, it created a classification known as soft tissue rheumatism. Included in this listing are conditions in which joints are not involved. Soft tissue rheumatism encompasses the supporting structures of joints (e.g., ligaments, bursae, and tendons), muscles, and other soft tissues. Fibromyalgia is a form of soft tissue rheumatism. A combination of three terms—fibro (from the Latin fibra, or fibrous tissue), myo- (the Greek prefix myos, for muscles), and algia (from the Greek algos, which denotes pain)—fibromyalgia replaces earlier names for the syndrome that are still used by doctors and other health professionals such as myofibrositis, myofascitis, muscular rheumatism, fibrositis, and gener­alized musculoligamentous strain. Fibromyalgia is not a form of arthritis, since it is not associated with joint inflammation. In the late 1980s, a Multicenter Criteria Committee under the direction of Dr. Frederick Wolfe at the University of Kansas was formed to define fibromyalgia. In their study, 293 patients with presumed fibromyalgia were compared with 265 patients who had other rheumatic diseases in 16 centers throughout North America. The groups were evaluated for a variety of symptoms, signs, and laboratory abnormalities in an effort to ascertain which factors were the most sensitive and specific for defining the disorder. In other words, the investigators wanted to identify the most frequently found features of fibromyalgia (sensitivity) that could help doctors differentiate it from other disorders (specificity). The list in Table 1 was 88.4 percent sensitive and 81.1 percent specific in identifying fibromyalgia patients. As a result, these criteria were endorsed in 1990 by the American College of Rheumatology (ACR), the association to which nearly all 5,000 rheumatologists in the United States and Canada belong. Focusing on Table 1 and Figure 3, fibromyalgia essentially is: 1. Widespread pain of at least 3 months’ duration (this rules out viruses or traumatic insults which resolve on their own). 2. Pain in all four quadrants of the body (picture cutting the body into quarters, as in a pie): right side, left side, above the waist, below the waist.
APA, Harvard, Vancouver, ISO, and other styles
8

Wurster, Charles F. "Time to Go After the Feds." In DDT Wars. Oxford University Press, 2015. http://dx.doi.org/10.1093/oso/9780190219413.003.0012.

Full text
Abstract:
By the fall of 1969 we knew we had to challenge pesticide regulation by the federal government if we were to ultimately prevail against DDT, but we did not know how to do it. We had the science well in hand and knew how to present it, with literally hundreds of scientists prepared to testify within their areas of expertise. We did not have the organizational structure to launch such an effort at the federal level, however, and we were certainly short of money. At about that time Joseph L. Sax, then the leading proponent of the development of environmental law at the University of Michigan Law School, suggested that we contact the newly founded Center for Law and Social Policy (CLASP), a public-interest law firm in Washington, DC. Joe was a member of the CLASP board. He insisted that DDT was in violation of the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA) and that the U.S. Department of Agriculture (USDA) was not enforcing FIFRA. I therefore called and talked at length with James W. Moorman (Fig. 7.1), attorney for CLASP, describing the DDT problem and proposed action against USDA. “If we are going to do this, then you are going to come down here and help me put the case together,” said Jim firmly. That was not music to my ears: I had other things I needed to do, but shortly I was on my way to Washington. CLASP was in a rundown part of Washington, and my “housing” consisted of sleeping on an old mattress in their dusty attic. But we got to work and wrote a petition to USDA in about a week. The petition was a formal legal request that the FIFRA registrations for DDT be canceled. The petition also requested that USDA suspend the registrations while it was considering their cancellation. We had no illusions that USDA would grant our request, but it was Jim’s advice that we go to USDA for administrative relief before seeking cancellation and suspension from the courts.
APA, Harvard, Vancouver, ISO, and other styles
9

"Effect of High-Volume Oil Palm Biomass Waste in Mortar." In Recycled Waste Materials in Concrete Construction. IGI Global, 2019. http://dx.doi.org/10.4018/978-1-5225-8325-7.ch002.

Full text
Abstract:
This chapter discusses the utilization of wastes in the form of palm oil fuel ash, oil palm kernel shell, and oil palm fibre in the production of mortar mixes as a part of new and innovative materials in construction industry. Detailed introduction is provided followed by a clear description of each waste and its effect when added to mortar mixes. Furthermore, a research study on the effect of palm oil fuel ash, palm oil kernel shell, palm oil fibre on mortar properties was carried out and the experimental program details are given under four subtitles. Splitting tensile strength and flexural strength were performed to test the engineering properties of mortar containing different types of waste. Results and discussion are provided for additional grasp. It is concluded that the inclusion of high-volume palm oil biomass waste can produce sustainable mortars with high strength and with more durability performance.
APA, Harvard, Vancouver, ISO, and other styles
10

Hassan, Mohamad Zaki, Siti Amni Roslan, Zainudin A. Rasid, Mohd Zuhri Mohamed Yusoff, S. M. Sapuan, and Firdaus Muhammad-Sukki. "Optimizing the Mercerisation Effect on the Mode I Fracture Toughness of Bambusa Vulgaris Bamboo Using Surface Response Method." In Advances in Environmental Engineering and Green Technologies. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-1374-3.ch006.

Full text
Abstract:
Alkaline treatment is widely being promoted to treat natural fibres and improves the fibre bundle surface for better interlocking with the polymer matrix. The aim of this study is to optimize the merceration parameter including natrium hydroxide (NaOH) concentration, soaking and drying time for Bambusa Vulgaris bamboo using response surface methodology (RSM). Here, the treatment conditions were employed by the Box-Behnken design (BBD). The comparative study of the treated and untreated fibre on crack propagation behaviour, Mode I interlaminar fracture toughness (GIC) of the bamboo along the longitudinal direction test was carried out. Through the statistical analysis approach (ANOVA), it is suggested that bamboo treated with 1.5 wt.% concentration of NaOH is capable to reach the fracture toughness value up to 367.25 J/m2. It is also shown that all proposed variables for treatment in this study (i.e., the concentration of the NaOH is highly significant with the 2.85 hours of soaking and drying for 72.5 hours).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Fibra WLS"

1

Santos, Josemir C., José C. J. Almeida, and Luiz P. C. da Silva. "WLI high voltage optical fiber sensor systems with compensation for optical power fluctuations." In Third European Workshop on Optical Fibre Sensors. SPIE, 2007. http://dx.doi.org/10.1117/12.738667.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Santos, J. C., J. Rubini, L. P. C. Silva, and R. E. Caetano. "Low voltage integrated optics electro-optical modulator applied to optical voltage transformer based on WLI technique." In International Conference on Optical Fibre Sensors (OFS24), edited by Hypolito J. Kalinowski, José Luís Fabris, and Wojtek J. Bock. SPIE, 2015. http://dx.doi.org/10.1117/12.2195275.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Amal, R., J. Narendra, M. Sivakumar, and M. V. L. R. Anjaneyulu. "Performance Evaluation of Cold Bituminous Mix Reinforced with Coir Fibre." In International Web Conference in Civil Engineering for a Sustainable Planet. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.112.67.

Full text
Abstract:
Cold bituminous mix (CBM), which is a mixture of bitumen emulsion and aggregate that is mixed together at ambient temperature, has several advantages like energy savings, easiness in preparation, environmental benefits, and high production at low investment. But there are certain limitations of CBMs like inferior mechanical properties, high air voids, weak early life strength, long curing time and poor coating that hinder its extensive usage. The possibility of improving mechanical performance of CBMs by the addition of coir fibre is attempted in this study. The objectives of the study are to
APA, Harvard, Vancouver, ISO, and other styles
4

Gisario, A., F. Quadrini, and V. Tagliaferri. "Influence of Fibre Heating in PMC Production Technology." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95619.

Full text
Abstract:
Fibre heating can be employed to optimise composite fabrication in hand lamination. In order to show the fibre heating effect on the properties of hand laminated composites, dynamical and mechanical tests were performed on simply cured glass fibre reinforced laminates and on treated ones. In this second case the fibre content was heated before composite lamination by means of a hot parallel plate press. All the specimens were room temperature cured. A significant increase in storage modulus was observed as an effect of fibre heating as well as a data dispersion reduction. Additionally a lower
APA, Harvard, Vancouver, ISO, and other styles
5

Zeng, Pingying, Kang Wang, Ryan Leon Falkenstein-Smith, and Jeongmin Ahn. "Single-Phase Ceramic Membranes Integrated With Combustion Processes." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62351.

Full text
Abstract:
La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF6428) hollow fibre oxygen-permeable membranes were fabricated by extrusion technique. The oxygen permeability of a blank hollow fibre membrane was investigated with helium as sweeping gas. The oxygen permeation flux result was reported, agreeing very well with previous work. Then the hollow fibre membrane was packed with LSCF6428 catalyst and assembled as hollow fibre membrane reactor for methane combustion, aiming to separate the CO2 in the combustion exhaust from the nitrogen in air. The CO2 selectivity at various conditions was studied.
APA, Harvard, Vancouver, ISO, and other styles
6

Tapanes, E. "Dual-Purpose Fibre Optic System Providing Simultaneous, Real-Time Communications and Distributed Vibration Sensing for Pipeline Applications." In 1998 2nd International Pipeline Conference. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/ipc1998-2013.

Full text
Abstract:
A proprietary fibre optic sensing technology has been developed and is capable of simultaneously utilising an existing fibre optic communication cable as an integrity-testing sensing cable, thus providing continuous, real-time monitoring of the fibre cable and any structure near the cable (ie., ground, tunnels, ducts, pipes, buildings, equipment, vessels, etc.). With this system, simultaneous fibre optic communications and real-time vibration monitoring was demonstrated using a wavelength multiplexed fibre system for a channel bandwidth of 500 MHz over 18 km of standard singlemode fibre. Real-
APA, Harvard, Vancouver, ISO, and other styles
7

Mondal, Sabyasachi, Puja Agarwala, Suvankar Dutta, Vishvas Naik-Nimbalkar, Pratik Pande, and Sunil Dhumal. "Cellulosic fibre drying: fundamental understanding and process modeling." In 21st International Drying Symposium. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7384.

Full text
Abstract:
Process modeling of conveyer dryer for cellulosic fibre drying demands many fundamental insights. Present study highlights detailed cellulosic fibre drying aspects like mass transfer correlation relating mass transfer rate with process conditions, normalized drying curve and critical moisture content. Cellulosic fibre drying follows falling rate period, where rate of mass transfer decreases with moisture content. Conveyer dryer process model for commercial cellulosic fibre drying was developed and validated successfully. Moderate drying strategy derived based on developed process model and dry
APA, Harvard, Vancouver, ISO, and other styles
8

Baik, K. H., P. S. Grant, A. R. Bhatti, and R. A. Shatwell. "Fabrication of SiC Fibre Reinforced MoSi2 Based Composites by Low Pressure Plasm a Spraying." In ITSC 2000, edited by Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0821.

Full text
Abstract:
Abstract SiC fibre reinforced SiAlON-MoSi2 composites have been manufactured by concurrent fibre winding and low pressure plasma spraying (LPPS), producing multi-layer, circumferentially fibre-reinforced composite rings. LPPS parameters for the powder used were optimised by a two-level experimental design method followed by additional tuning, achieving smooth sprayed surfaces with low matrix porosity and good deposition efficiency. The microstructure of the SiAlON-MoSi2 matrix consisted of a lamellar structure and uniformly distributed SiAlON splats throughout the MoSi2 matrix. The spray/wind
APA, Harvard, Vancouver, ISO, and other styles
9

Yousif, B. F., K. J. Wong, and N. S. M. El-Tayeb. "An Investigation on Tensile, Compression and Flexural Properties of Natural Fibre Reinforced Polyester Composites." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-44012.

Full text
Abstract:
In the present work, effects of two types of natural fibres on mechanical properties of polyester composites were investigated at different volume fractions of fibre. Tensile, compression, and flexural properties of oil palm bunch and oil palm fruit fibres reinforced polyester composites were investigated. Additionally, tensile strength of the selected composites was calculated theoretically. Scanning electron microscope was used to observe the fracture mechanism of the specimens. Single fiber pull-out tests were carried out to determine the interfacial shear strength between polyester resin a
APA, Harvard, Vancouver, ISO, and other styles
10

Berg, Arne, and Niels Jo̸rgen Risho̸j-Nielsen. "Integrity Monitoring of Flexible Risers by Optical Fibres." In ASME 2002 21st International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/omae2002-28088.

Full text
Abstract:
The use of fibre optic sensing technology for integrity monitoring of flexible risers has been demonstrated. A technique for integration of the sensors along the tensile armouring has been developed and used in testing of a full-scale riser where the strain in the tensile armour was measured. The integration technique is also applicable to fibre optic sensors for other measurands. The test riser was exposed to a fatigue test of 612 000 bending cycles. The strain measurements provided new and important data about the conditions in the annulus of a riser during operation. The small diameter of o
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!