Relevant bibliographies by topics / Film insert injection molding

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Film insert injection molding'

Author: Grafiati
Published: 4 June 2021
Last updated: 5 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Film insert injection molding.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Film insert injection molding"

1

Lee, Ho Sang, Young Gil Yoo, and Tae An Kim. "Film Insert Molding of Automotive Door Grip Using Injection-Compression Molding." Transactions of the Korean Society of Mechanical Engineers A 38, no. 7 (2014): 771–77. http://dx.doi.org/10.3795/ksme-a.2014.38.7.771.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Ho-Sang, and Jong-Rak Park. "Experimental study of injection-compression molding of film insert molded plates." International Journal of Precision Engineering and Manufacturing 15, no. 3 (2014): 455–61. http://dx.doi.org/10.1007/s12541-014-0357-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nugay, Isik Isil, and Miko Cakmak. "Instrumented film-insert injection compression molding for lens encapsulation of liquid crystal displays." Displays 38 (July 2015): 20–31. http://dx.doi.org/10.1016/j.displa.2015.01.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, Jung-Ho, Ji-Hun Mun, and Hong-Seok Park. "Development of Film Fixing System for Improving Overlap Defects in the Film Insert Injection Molding Process." Journal of manufacturing engineering & technology 22, no. 3 (2013): 472–79. http://dx.doi.org/10.7735/ksmte.2013.22.3.472.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Oliveira, Eva, João Paulo Silva, Jorge Laranjeira, et al. "Fabrication, Characterization and Implementation of Thermo Resistive TiCu(N,O) Thin Films in a Polymer Injection Mold." Materials 13, no. 6 (2020): 1423. http://dx.doi.org/10.3390/ma13061423.

Full text
Abstract:
This paper presents the development of metallic thermoresistive thin film, providing an innovative solution to dynamically control the temperature during the injection molding process of polymeric parts. The general idea was to tailor the signal response of the nitrogen- and oxygen-doped titanium-copper thin film (TiCu(N,O))-based transducers, in order to optimize their use in temperature sensor devices. The results reveal that the nitrogen or oxygen doping level has an evident effect on the thermoresistive response of TiCu(N,O) films. The temperature coefficient of resistance values reached 2
APA, Harvard, Vancouver, ISO, and other styles
6

Solorza-Nicolas, Omar, Hilario Hernandez-Moreno, Orlando Susarrey-Huerta, and Nestor Romero-Partida. "Film-insert injection compression molding for reinforced polycarbonate with woven glass fiber oriented 90/0°, ± 45°." Polymer Engineering & Science 59, s2 (2019): E372—E379. http://dx.doi.org/10.1002/pen.25068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

NISHIYABU, Kazuaki, Kenichi KAKISHITA, and Shigeo TANAKA. "Fabrication of Micro-Structured Parts by Resist-Film Insert Metal Injection Molding and Effects of Particle Size." TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 76, no. 761 (2010): 75–80. http://dx.doi.org/10.1299/kikaia.76.75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

JANG, JIN MAN, WONSIK LEE, SEONG-HO SON, SE-HYUN KO, and IL-HO KIM. "FABRICATION OF MICRO GEARS BY MICRO-POWDER INJECTION–COMPRESSION MOLDING." Surface Review and Letters 17, no. 02 (2010): 235–40. http://dx.doi.org/10.1142/s0218625x10013941.

Full text
Abstract:
Micro-spur gears were fabricated by powder injection–compression molding and micro-two-step gears were produced through stacking and sintering of the green parts. Shrinkage of micro-gears by sintering was larger in teeth and with increase of compression pressure, shrinkage was decreased due to increase of density in green parts. Surface roughness of sintered body was reduced to a few hundreds of nanometers by ultrasonic micro-polishing. The joining of green bodies by stacking and sintering was achieved using the pressurized sintering and insert of feedstock powders between both green bodies.
APA, Harvard, Vancouver, ISO, and other styles
9

Giang, Nguyen Truong, Pham Son Minh, Tran Anh Son, Tran Minh The Uyen, Thanh-Hai Nguyen, and Hung-Son Dang. "Study on External Gas-Assisted Mold Temperature Control with the Assistance of a Flow Focusing Device in the Injection Molding Process." Materials 14, no. 4 (2021): 965. http://dx.doi.org/10.3390/ma14040965.

Full text
Abstract:
In the injection molding field, the flow of plastic material is one of the most important issues, especially regarding the ability of melted plastic to fill the thin walls of products. To improve the melt flow length, a high mold temperature was applied with pre-heating of the cavity surface. In this paper, we present our research on the injection molding process with pre-heating by external gas-assisted mold temperature control. After this, we observed an improvement in the melt flow length into thin-walled products due to the high mold temperature during the filling step. In addition, to dev
APA, Harvard, Vancouver, ISO, and other styles
10

Leong, Y. W., S. Yamaguchi, M. Mizoguchi, H. Hamada, U. S. Ishiaku, and T. Tsujii. "The effect of molding conditions on mechanical and morphological properties at the interface of film insert injection molded polypropylene-film/polypropylene matrix." Polymer Engineering and Science 44, no. 12 (2004): 2327–34. http://dx.doi.org/10.1002/pen.20260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Film insert injection molding"

1

Nugay, Isik Isil. "POLYURETHANES in RIGID and FLEXIBLE ELECTRONICSNOVEL HYBRID PROCESSING TECHNIQUES and REAL-TIME MONITORING OF MATERIAL PROPERTIES." University of Akron / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=akron1406633847.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Weigelt, Karin. "Integration gedruckter Elektronik in Kunststoffe durch Folienhinterspritzen." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-132550.

Full text
Abstract:
Ausgehend von der Anwendung von Folienhinterspritzprozessen für dekorative Zwecke wurde deren Nutzung für die Integration elektronischer Strukturen in Kunststoffbauteile untersucht. Die Herstellung der elektronischen Bauelemente erfolgte mittels verschiedener Druckverfahren mit elektrisch leitfähigen und dielektrischen Materialien auf Polycarbonatfolien. Im Fokus standen zum einen kapazitiv auslesbare Speicherstrukturen und zum anderen Elektrolumineszenzleuchten. Nach dem Druck wurden die bedruckten Folien z. T. verformt und hinterspritzt. In der Arbeit wird auf die Auswirkungen der Verform- u
APA, Harvard, Vancouver, ISO, and other styles
3

Stavárek, Václav. "Optimalizace jádra formy na vstřikování plastů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400449.

Full text
Abstract:
Diplomová práce vznikla ve spolupráci s průmyslovým partnerem, který vyrábí elektrické komponenty pro automobilový průmysl. Tato firma se potýká s problémy často se porušujících jader v některých jejich formách na vstřikování plastů, vyrábějících převážně housingy pro konektory. Firma disponuje licencemi na komerční software pro simulaci injekčního vstřikování Moldflow a Moldex3D a také pro simulaci metodou konečných prvků Ansys. Nejprve jsou shrnuty teoretické poznatky ohledně injekčního vstřikování a jeho simulace, řešení problémů interakce těles s tekutinou a únavy materiálu. Poté je popsán
APA, Harvard, Vancouver, ISO, and other styles
4

Franc, Vladimír. "Návrh robotické buňky pro obsluhu vstřikolisů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400976.

Full text
Abstract:
The aim of this thesis is to design a robotic cell for automated injection molding operation. At the beginning of this paper, the input parameters and the assignment are analyzed. This is then followed up by the layout of the workplace, design of its equipment, selection of robots and the design of their end effectors and peripherals with regard to the specified boundary conditions and operator’s safety. The output of this work is a 3D cell model and its simulation model in PLM software Siemens Process Simulate, which verifies the production cycle time.
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Tzu-Chien, and 黃子健. "Direct Si-Mold Insert of Micro Grooves With Injection Molding." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/55673903623113585735.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>機械工程系<br>92<br>This research is to develop a Direct Si-Molding (DSM) of Silicon insert with micro-grooves by injection molding process and to investigate the effects of injection parameters with Design of Experiment (DOE). A closed-loop mold cavity temperature control system (CLMCTCS) has been designed and developed to evaluate the effects of injection parameters to the formability of thin parts with micro-grooves. Conventional LIGA process uses the electro-forming process to pattern transfer the silicon dies obtained by lithography into Nickel metal mold insert. In this r
APA, Harvard, Vancouver, ISO, and other styles
6

LU, SHIN-JYUN, and 盧欣君. "Study on Residual Stress in Contact Interface of Insert Injection Molding." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/72429343180451031351.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>模具工程系<br>105<br>Abstract The car tail light is combined with various lights, such as driving light, brake and light, turn signal. It needs different colors of transparent plastic combination. Most of materials used PMMA. But different color products need to multi-color injection molding. Multi-color injection, after the first shot becomes solidification, second shot injects into mold. Contact interface of two plastics will produce uneven heat conduction, temperature distribution and volume shrinkage. It causes product with residual stress, and product prone to warp and c
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Zhi-Feng, and 林志峰. "Research on Injection Molding of Silicon Mold Insert with Micro Grooves." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/34643426057364213198.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>機械工程系<br>91<br>This research is to investigate the feasibility of Direct Si-Molding (DSM) using the single crystal silicon as mold insert in injection molding and also the formability of micro grooves by DSM. Due to increasing demand of micro features or structures in many industrial products, DSM can reduce the difficulties of pattern transfer and increase the precision of molding process as well as cost down of mold fabrication. Moreover, the silicon material has excellent heat conduction rate to enhance micro groove molding. In this research, the operation parameter win
APA, Harvard, Vancouver, ISO, and other styles
8

Yu, Chia-Wei, and 游嘉瑋. "Study of Insert Injection Molding of Heterogeneous Bonding of PC on Glass Insert with Sub-Micron Structures." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/fn4n8q.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>機械工程系<br>106<br>This study aims to develop a novel heterogeneous bonding method by using mechanical adhesion mechanism to combine polymer and glass by submicron pores structure of anodic aluminum oxide (AAO). This research is to fabricate heterogeneous bonding products like Plano lens, Aspherical lens, and Aspherical lens array by insert injection molding (IIM). An AAO film has been fabricated on Al plate and then back etching to single AAO film. The optical performance shows that the light transmittance of AAO film with thickness 390 nm is around 75 %. Then, the 6" AAO/Glass
APA, Harvard, Vancouver, ISO, and other styles
9

Tsai, Yueh-Lin, and 蔡岳霖. "Application of carbon coating of the mold insert in micro injection molding." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/61261387746935236427.

Full text
Abstract:
碩士<br>國立成功大學<br>航空太空工程學系專班<br>95<br>Due to the improvement of injection molding technology, a lot of products become smaller and more delicate.The micro-injection molding gradually plays a major role in the mass production. This study utilized the surface rapid heating system to understand the heating effect on the micro-injection molding. A graphite thin film (0.1μm thickness) was coated onto the surface of insert the mold by ion sputtering to enhance the heat absorption during the infrared heating.Space the result shows that the injection process was enhanced by the graphite coating as well
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Tzu-Yi, and 王子怡. "The experiment and simulation of plastic injection molding product with metal insert." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/33155262768953453070.

Full text
Abstract:
碩士<br>國立高雄應用科技大學<br>模具系碩士在職專班<br>101<br>In my in-depth study of metal embedded in plastic injection molding and structural design of relationship. This research results provide the latest embedded product design basis. First use ABAQS finite element analysis software to analyze the different structures of the flexural deformation capacity and further analysis using Moldflow software in the same injection molding process parameters to analyzed the difference in structures. This verifies the reliability and practical control deformation to obtain the most stable structure condition. The origi
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Film insert injection molding"

1

Han, Chang Dae. Rheology and Processing of Polymeric Materials: Volume 2: Polymer Processing. Oxford University Press, 2006. http://dx.doi.org/10.1093/oso/9780195187830.001.0001.

Full text
Abstract:
Volume 2 presents the fundamental principles related to polymer processign operations including the processing of thermoplastic polymers and thermosets. The objective of this volume is not to provide recipies that necessarily guarantee better product quality. Rather, emphasis is placed on presenting a fundamental approach to effectively analyze processing operations. The specific polymer processing operations for thermoplastics include plasticating single-screw extrusion, morphology evolution during compounding of polymer blends, compatibilization of immiscible polymer blends, wire coating ext
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Film insert injection molding"

1

Wang, Jung-Chang, Tien-Li Chang, and Ya-Wei Lee. "Insert Molding Process Employing Vapour Chamber." In Some Critical Issues for Injection Molding. InTech, 2012. http://dx.doi.org/10.5772/35621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Borg, A., and A. Rochman. "Design, manufacture and testing of titanium EBM insert for injection molding." In High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping. CRC Press, 2013. http://dx.doi.org/10.1201/b15961-68.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Film insert injection molding"

1

Fujii, Shoko, Hideki Aoyama, Yukio Mori, Youichi Azagami, and Syouji Harada. "Method for Producing Three-Dimensional Designs in Film Insert Molding." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70636.

Full text
Abstract:
Plastic is an important material in product design because it easily transforms, is very light, and has multifarious structural characteristics. Nevertheless, it gives the customer the impression of a cheap product. Therefore, decorative techniques are often applied to plastic products. Decorative techniques can improve the appearance of a plastic product while making use of its beneficial characteristics. At present, film insert molding method is predominantly used in decorating plastic products. In general, a designer creates a three-dimensional design but the film insert molding method uses
APA, Harvard, Vancouver, ISO, and other styles
2

Hofstätter, Thomas, Sina Baier, Camilla H. Trinderup, et al. "Internal fiber structure of a high-performing, additively manufactured injection molding insert." In MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5088312.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wimmer, Annette, Herbert Reichel, and Klaus Schmidt. "New standards for 3D-userinterfaces-manufactured by a Film Insert Molding process." In 2018 13th International Congress Molded Interconnect Devices (MID). IEEE, 2018. http://dx.doi.org/10.1109/icmid.2018.8526978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hong-Seok Park and Xuan-Phuong Dang. "Development of a retention mechanism for minimizing defective overlap in film-insert molding." In 2010 International Forum on Strategic Technology (IFOST). IEEE, 2010. http://dx.doi.org/10.1109/ifost.2010.5667922.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nalawade, Rajvardhan, Nihar Patwardhan, and Chinmay Purohit. "Flashless plastic injection molding using rubber film and extruded die combination." In 1ST INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY (ICAMEN 2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5123981.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wöhner, Timo, Ben R. Whiteside, Guido Tosello, Hans Nørgaard Hansen, and Aminul Islam. "Influence of Process Temperatures on Blister Creation in Micro Film Insert Molding of a Dual Layer Membrane." In 4M/IWMF2016 The Global Conference on Micro Manufacture : Incorporating the 11th International Conference on Multi-Material Micro Manufacture (4M) and the 10th International Workshop on Microfactories (IWMF). Research Publishing Services, 2016. http://dx.doi.org/10.3850/978-981-11-0749-8_715.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ge, Xiaohong, Shaolan Wu, Hui Li, and Hongwu Huang. "Research on General Model of Hot Runner Mould for Transparent and Complex Plastic Knobs." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-12113.

Full text
Abstract:
In order to improve the manufacturing efficiency and product quality of transparent and complex plastic knobs, a hot runner injection mold is introduced in this paper. Based on a shared hot runner system and a module combination of the mold holders, inserts and the beryllium-copper cored cooling components, an effective general model for hot runner injection molding is developed. The beryllium copper insert extrusion process is employed to copy with the requirements of great variety, high quality, low price and short producing cycle for knob products. The results of CAE analysis and production
APA, Harvard, Vancouver, ISO, and other styles
8

Chailly, Mikae¨l, Vincent Gilbert, Jean-Yves Charmeau, and Yves Bereaux. "Study of the Influence of Surface Mold Deposits on the Demolding Stage of the Injection Molding Process of Thermoplastics." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15628.

Full text
Abstract:
Due to increasing expectings from the market, the aspect of molded parts has to be improved. Some of the defects observed such as scratches on these parts is related to the demolding stage. To limit this, we investigated the influence on demolding forces using various surface deposits on the mold surface, mainly PVD and PACVD deposits : Chromium nitrium (CrN), Titane nitrium (TiN), Diamond like Carbon (DLC), glassy deposit (SiOx), Chromium and polished steel on an cube-shaped insert in an instrumented mold (with force sensors). Injection campaign was led on three polymers which differ in terms
APA, Harvard, Vancouver, ISO, and other styles
9

Annette, Wimmer, Schirmer Julian, Reichel Herbert, and Reichenberger Marcus. "Numerical and experimental analysis of high pressure forming and injection molding processes with assembled film electronics." In 2021 14th International Congress Molded Interconnect Devices (MID). IEEE, 2021. http://dx.doi.org/10.1109/mid50463.2021.9361623.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yoon, Jonghyuk, Nahmkeon Hur, Ah-Hyun Bae, and Taehee Lee. "A Numerical Analysis on the Behaviors of Polymer Film and Resin in an In-Mold Decoration Process." In ASME 2013 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fedsm2013-16399.

Full text
Abstract:
In various manufacturing industries, an in-mold decoration (IMD) process for plastic objects is widely utilized because a film forming and an injection molding process run simultaneously. In the present study, the deformation of polymer film and resin in the IMD process were numerically investigated to evaluate the quality of the plastic object formed by the IMD process, which consists of vacuum suction and injection molding. To obtain the initial shape of the polymer film during the injection molding process, the deformation of the polymer film in the vacuum suction process was pre-formed usi
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Film insert injection molding' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography