Relevant bibliographies by topics / Film samples

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Film samples'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Film samples.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Film samples"

1

Mirmohammad-Hosseini-Oushani, Seyedeh-Niousha, and Nasser Zare-Dehnavi. "Effect of annealing on the morphology and the optical characterization of the AZO:Co thin film prepared by Sol–Gel process." International Journal of Modern Physics B 33, no. 29 (2019): 1950345. http://dx.doi.org/10.1142/s0217979219503454.

Full text
Abstract:
In this work, the ZnO thin film, the Al-doped ZnO (AZO) thin film (0.98M ZnO, 0.02M Al) and the (Al,Co) co-doped ZnO thin film (AZO:Co) (0.95M ZnO, 0.02M Al, 0.03M Co) were deposited on the glass substrate by the Sol–Gel method. We fabricated a sample of the ZnO thin film, a sample of the AZO thin film and three samples of AZO:Co thin films. The spin-coating was used to deposit thin film on the glass substrate. The ZnO and the AZO thin films were annealed at 450[Formula: see text]C while three samples of the AZO:Co thin films were annealed at 300[Formula: see text]C, 450[Formula: see text]C an
APA, Harvard, Vancouver, ISO, and other styles
2

Šuput, Danijela, Senka Popović, Nevena Hromiš, Jovana Pantić, Biljana Lončar, and Lato Pezo. "Shellac resin effect on the properties of zein film." Journal on Processing and Energy in Agriculture 27, no. 2 (2023): 53–57. http://dx.doi.org/10.5937/jpea26-47221.

Full text
Abstract:
In this paper, zein-based films with the addition of shellac were synthesized by lamination on the existing dry zein film (L samples) and by adding shellac alcohol solution during the synthesis of zein film in a ratio of 50-50 by casting process (M samples). Zein films without the addition of shellac were designated as control samples. Physico-chemical (thickness, moisture content and solubility), mechanical (tensile strength and elongation at break) and barrier characteristics (water vapor permeability) were examined for all samples. The resulting films were transparent, glossy, light yellow
APA, Harvard, Vancouver, ISO, and other styles
3

Banerjee, S., and K. A. Cook-Chennault. "Polarization Parameters and Scaling Matter—How Processing Environment and Shape Factor Influence Electroactive Nanocomposite Characteristics." Journal of Composites Science 4, no. 3 (2020): 141. http://dx.doi.org/10.3390/jcs4030141.

Full text
Abstract:
Polymeric-ceramic smart nanocomposite piezoelectric and dielectric materials are of interest due to their superior mechanical flexibility and ability to leverage characteristics of constituent materials. A great deal of work has centered on development of processes for manufacturing 0–3 continuity composite piezoelectric materials that vary in scale ranging from bulk, thick and thin film to nanostructured films. Less is known about how material scaling effects the effectiveness of polarization and electromechanical properties. This study elucidates how polarization parameters: contact versus c
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Chao, Wenxin Li, Guangqin Wu, et al. "Design and Study of Composite Film Preparation Platform." Crystals 14, no. 5 (2024): 389. http://dx.doi.org/10.3390/cryst14050389.

Full text
Abstract:
This study aims to develop equipment for the preparation of composite films and successfully implement a film thickness prediction function. During the research process, we segmented the mechanical structure of the composite thin film preparation equipment into distinct modules, completed the structural design of the core module, and validated the stability of the process chamber, as well as the reasonableness of the strength and stiffness through simulation. Additionally, we devised a regression model for predicting the film thickness of composite films. The input features for the model inclu
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Hyeongyu, Phuoc-Cao Van, Hyeonjung Jung, et al. "Deposition of Crystalline GdIG Samples Using Metal Organic Decomposition Method." Magnetochemistry 8, no. 3 (2022): 28. http://dx.doi.org/10.3390/magnetochemistry8030028.

Full text
Abstract:
Fabrication of high quality ferrimagnetic insulators is an essential step for ultrafast magnonics, which utilizes antiferromagnetic exchange of the ferrimagnetic materials. In this work, we deposit high-quality GdIG thin films on a (111)-oriented GGG substrate using the Metal Organic Decomposition (MOD) method, a simple and high throughput method for depositing thin film materials. We postannealed samples at various temperatures and examined the effect on structural properties such as crystallinity and surface morphology. We found a transition in the growth mode that radically changes the morp
APA, Harvard, Vancouver, ISO, and other styles
6

Singh, Soram Bobby, Ng Boinis Singh, and H. Basantakumar Sharma. "Study on the Effect of Thickness on Structural and Optical Properties of Nanocrystalline Bismuth Ferrite (BiFeO3) Thin Films." Advanced Materials Research 410 (November 2011): 142–47. http://dx.doi.org/10.4028/www.scientific.net/amr.410.142.

Full text
Abstract:
Nanocrystalline Bismuth ferrite (BiFeO3) thin films of different thickness were deposited on glass substrates using sol-gel processing technique. The effect of thickness on structural and optical properties of BiFeO3thin films has been studied. The as-fired films were found to be amorphous that crystallized to hexagonal structure after annealing at 500°C for 2hr in air. The XRD pattern shows that the samples are polycrystalline in structure. At low annealing temperature (400°C), the thick film samples show amorphous in nature while thinner film shows some crystallinity with the presences of im
APA, Harvard, Vancouver, ISO, and other styles
7

Ranasinghe, Rusiraka, Panchali Dias, and Bazlul Mobin Siddique. "Development and characterization of nanocellulose-incorporated Chitosan-starch-based composite films for sustainable packaging for food." Future Sustainability 3, no. 3 (2025): 12–17. https://doi.org/10.55670/fpll.fusus.3.3.2.

Full text
Abstract:
A series of edible chitosan-starch (CS-S) biocomposite films were developed by simple integration of monomers and casting process, which was tested for its physicochemical integrity through tensile strength, FTIR analysis, TGA analysis, water vapor permeability, and opacity. Microcrystalline cellulose (MCC) and cellulose nanofiber (CNF) were used to improve the film's properties. The film with the highest tensile strength was 2:3 (CS:S) - CNF, which had a value of 8.99 MPa. According to the FTIR data, all nine types of film samples produced were found to have good integration of the added mate
APA, Harvard, Vancouver, ISO, and other styles
8

STRANTZ, A. A., and E. A. ZOTTOLA. "Bacterial Survival on Lean Beef and Bologna Wrapped With Cornstarch-Containing Polyethylene Film." Journal of Food Protection 55, no. 10 (1992): 782–86. http://dx.doi.org/10.4315/0362-028x-55.10.782.

Full text
Abstract:
Cornstarch-containing plastic films could be used to package foods if the presence of cornstarch had no adverse effect on food safety. The survival of pathogenic bacteria on meat samples that had been wrapped with cornstarch-containing plastic film was evaluated. Cornstarch-containing polyethylene film and control polyethylene film were used to cover lean beef and bologna that had been inoculated with Salmonella typhimurium, Staphylococcus aureus, and Bacillus cereus. Additional samples were prepared in which inoculum was applied to the outer surface of plastic-covered meat. Samples were store
APA, Harvard, Vancouver, ISO, and other styles
9

Rossi Albertini, V., B. Paci, S. Meloni, R. Caminiti, and L. Bencivenni. "Energy-dispersive X-ray diffraction on thin films and its application to superconducting samples." Journal of Applied Crystallography 36, no. 1 (2003): 43–47. http://dx.doi.org/10.1107/s0021889802018319.

Full text
Abstract:
Energy-dispersive X-ray diffraction is applied to investigate double-layer PBCO/YBCO thin films deposited by laser ablation. The merits of this technique for the structural study of films are discussed. It is shown that the rocking curves of the Bragg reflections of a film along thecdirection can be simultaneously collected, allowing the accurate evaluation of its angular spread. A systematic displacement of the rocking curves of the film with respect to those of the substrate was found, revealing a slight divergence of the growth direction from the normal to the substrate surface.
APA, Harvard, Vancouver, ISO, and other styles
10

Dong, Bing Hui, Chen Zhang, Zafer Alajmi, Ke Yong Wang, and Tao Fu. "Sol-Gel Derived TiO2 Coating on Hydrothermally Roughened NiTi Alloy." Advanced Materials Research 668 (March 2013): 830–34. http://dx.doi.org/10.4028/www.scientific.net/amr.668.830.

Full text
Abstract:
Nearly equiatomic NiTi alloy is hydrothermally treated in a urea solution at 150°C to form nanostructures at the surface, with the aim to improve the structural quality of sol-gel deposited TiO2 film. Nanosheets film of ammonium titanate is formed on NiTi alloy after 8 h hydrothermal treatment, and the sol-gel TiO2 film on it is smooth and crack-free. Anatase TiO2 films consisting of nanoparticles and granular deposits are formed on the NiTi samples hydrothermally treated for 16 h and 24 h. The subsequently deposited TiO2 films have short cracks, because the nanostructured films can not comple
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Film samples"

1

THACHERY, JUGUL RAVINDRAN. "SYNTHESIS AND CHARACTERIZATION OF NEODYMIUM SULFIDE BULK SAMPLES AND THIN FILMS." University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1012424793.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Al-Hammad, Muneerah Saleh. "A study of the structures of some thin film samples by X-ray and neutron reflectometry." Thesis, University of Sheffield, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.408372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pokpas, Keagan William. "Graphene-modified pencil graphite bismuth-film electrodes for the determination of heavy metals in water samples using anodic stripping voltammetry." University of the Western Cape, 2013. http://hdl.handle.net/11394/4829.

Full text
Abstract:
>Magister Scientiae - MSc<br>Electrochemical platforms were developed based on pencil graphite electrodes (PGEs) modified with electrochemically deposited graphene (EG) sheets and Nafion-graphene (NG) nanocomposites in conjunction with an in situ plated bismuth-film (EG-PG-BiE and NG-PG-BiE). The EG- and NG-PG-BiEs were used as sensing platforms for determining Zn2+, Cd2+ and Pb2+ by square wave anodic stripping voltammetry (SWASV). EG sheets were deposited onto pencil graphite electrodes by cyclic voltammetric reduction from a graphene oxide (GO) solution, while a dip coating method was used
APA, Harvard, Vancouver, ISO, and other styles
4

Кузнецова, А. О., та О. Л. Волкова. "Тензо- і магніторезистивні властивості плівкових зразків на основі Pd/Fe". Thesis, Видавництво СумДУ, 2012. http://essuir.sumdu.edu.ua/handle/123456789/27668.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mondaca, Fernandez Iram. "Spectroscopy Techniques for quantification of Microorganisms in Environmental Samples." Tucson, Arizona : University of Arizona, 2006. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu%5Fetd%5F1416%5F1%5Fm.pdf&type=application/pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mikhailov, I. F., A. A. Baturin, Ye A. Bugaev, A. I. Mikhailov, and S. S. Borisova. "Metal Films as Mass Standard Samples in the Nano-Gram Range." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35167.

Full text
Abstract:
Attestation of magnetron sputtered films as mass standards is presented. Homogeneous, long-lived metal films were measured by different methods for comparison. The accuracy of the order 1 ng was found to be provided by application of the metal film standards for element analysis by X-ray fluorescent method. Keywords: Thin Films, Nano-Standards, Magnetron Sputtering, X-ray Reflectometry, X-ray Fluorescent When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35167
APA, Harvard, Vancouver, ISO, and other styles
7

Minault, Christophe S. "Filtered vacuum arc deposition of diamond like carbon films on sharp edged samples." Thesis, University of Reading, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.298488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Burkhard, Michael A. "Sample fabrication and experimental approach for studying interfacial sliding in thin film-substrate systems." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2006. http://library.nps.navy.mil/uhtbin/hyperion/06Sep%5FBurkhard.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Thornell, Mark E. "Sample fabrication and experimental design for studying interfacial creep at thin film/silicon interfaces." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2004. http://library.nps.navy.mil/uhtbin/hyperion/04Mar%5FThornell.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Svensson, Sjöbom Ludvig. "Channeling of MeV ion beams : Improving sample alignment at the tandem accelerator, Ångström laboratory." Thesis, Uppsala universitet, Tillämpad kärnfysik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-230962.

Full text
Abstract:
At the Tandem accelerator in the Ångström laboratory, Uppsala, Rutherford backscattering spectrometry (RBS) is one of the methods used for thin film analysis, providing information on thickness and composition. The films are commonly grown on silicon substrates, whose crystal structure gives rise to channelling effects (a strong angular dependence in the intensity of the signal), which can cause faulty results. For other samples, channelling may also be used to get information on crystal structure and quality. This work demonstrates new functions to the existing software, aiming at minimizing
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Film samples"

1

(Firm), Knovel, ed. Knovel sample book. Knovel, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Truesdell, Cliff. Introducing Reason 4. Wiley, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

W, Childs G. Using Reason onstage: Skill pack. Course Technology, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Miller, Webb. A software tools sampler. Prentice-Hall, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Project, Paper Industry Education, ed. Paper matters fact file: Samples and facts on paper and board. Paper Publications, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Eisele, Andrew. The power of Reason 5. Hal Leonard Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Eisele, Andrew. Power tools for Reason 6. Hal Leonard Books, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Eisele, Andrew. Sound design and mixing in Reason. Hal Leonard Books, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eisele, Andrew. The power in Reason. Hal Leonard Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prager, Michael. Reason 5 power!: The comprehensive guide. Course Technology PTR, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Film samples"

1

Cocco, Federica, Marzia Fantauzzi, Bernhard Elsener, and Antonella Rossi. "How Surface Analysis Can Contribute to an Understanding of the Preventive Conservation of Brass Instruments." In Musikforschung der Hochschule der Künste Bern. Edition Argus, 2022. http://dx.doi.org/10.26045/kp64-6179-006.

Full text
Abstract:
Historical brass instruments can suffer corrosion during and after playing due to the high degree of humidity inside – but the surface chemistry inside the tuning slides remains essentially unknown. Based on a series of previously published works of the present authors, this paper describes in a comprehensive way how ex-situ XPS surface analytical measurements can shed light on this topic. On freshly polished brass samples exposed to model solutions such as artificial saliva, a thick, polycrystalline surface film composed of copper-thiocyanate and zinc phosphate is formed, whereas in a phospha
APA, Harvard, Vancouver, ISO, and other styles
2

Cross, B. J., and J. E. Augenstine. "Trace Analysis Using EDS: Applications to Thin-Film and Heterogeneous Samples." In Advances in X-Ray Analysis. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3744-1_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Reichling, M., Z. L. Wu, E. Welsch, D. Schäfer, and E. Matthias. "High Frequency Photothermal Reflectivity and Displacement Measurements on Thin Film Samples." In Photoacoustic and Photothermal Phenomena III. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-540-47269-8_178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Luo, Yifan, and Hideo Miura. "Crystallinity-Induced Variation of the Strength of Electroplated Copper Thin Film in Through Silicon Vias Interconnection Structure." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7887-4_37.

Full text
Abstract:
Abstract As integrated circuits develop towards higher integration and miniaturization, the diameter of single micro-interconnection structure has approached the scale of several nanometers, which means consist of only one or a few crystals in a cross-section. In such microscopic scale, some problems start to emerge. In this study, a micro-tensile test method based on the FIB system was developed and the strength of copper thin film samples were measured. The crystallinity was quantitatively determined by applying IQ values obtained from EBSD analysis. Multiple single-crystal copper and bicrys
APA, Harvard, Vancouver, ISO, and other styles
5

Albert, Georg. "Chapter 5. Playing one’s part within a medial procedure." In Pragmatics & Beyond New Series. John Benjamins Publishing Company, 2024. http://dx.doi.org/10.1075/pbns.348.05alb.

Full text
Abstract:
The study at hand is part of a research project dedicated to the topic management in a political talk show. Here, the focus is on the talk show host’s activities resulting from her role-specific tasks within the show. The detailed analysis is dedicated to her presentations of pre-produced film clips as part of the show. Data samples are taken from a corpus of 19 editions of the German Anne Will show. The video samples and corresponding transcripts have been closely analysed with special regard to sequential organisation and the concurrence of verbal and non-verbal expressions. The observed int
APA, Harvard, Vancouver, ISO, and other styles
6

Eremenko, Arkadiy, Il'ya Kurochkin, and Nataliya Nechaeva. "Bioanalytical systems based on cholinesterases for detection of organophosphates." In ORGANOPHOSPHORUS NEUROTOXINS. Publishing Center RIOR, 2020. http://dx.doi.org/10.29039/32_205-218.

Full text
Abstract:
Various types of electrochemical sensors based on the inhibition of butyrylcholinesterase (BChE) have been presented for the analysis of organophosphates (OPC). A special design of thick film sensors and electrochemical detector for cholinesterases assay and their inhibitors in aqueous samples has been developed. For this assay, thiol sensitive sensors based on screen printed graphite electrode modified with nanoparticles of manganese dioxide were used. High sensitivity of manganese dioxide modified thick film sensors towards thiocholine and therefore low detection limit of BChE (1 pM) enabled
APA, Harvard, Vancouver, ISO, and other styles
7

Eremenko, Arkadiy, Il'ya Kurochkin, and Nataliya Nechaeva. "Bioanalytical systems based on cholinesterases for detection of organophosphates." In Organophosphorous Neurotoxins. Publishing Center RIOR, 2020. http://dx.doi.org/10.29039/chapter_5e4132b6096d14.18045940.

Full text
Abstract:
Various types of electrochemical sensors based on the inhibition of butyrylcholinesterase (BChE) have been presented for the analysis of organophosphates (OPC). A special design of thick film sensors and electrochemical detector for cholinesterases assay and their inhibitors in aqueous samples has been developed. For this assay, thiol sensitive sensors based on screen printed graphite electrode modified with nanoparticles of manganese dioxide were used. High sensitivity of manganese dioxide modified thick film sensors towards thiocholine and therefore low detection limit of BChE (1 pM) enabled
APA, Harvard, Vancouver, ISO, and other styles
8

Willis, James E. "Simultaneous Determination of the Thickness and Composition of Thin Film Samples using Fundamental Parameters." In Advances in X-Ray Analysis. Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1035-8_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Băilă, Diana-Irinel, Răzvan Păcurar, and Ancuța Păcurar. "Thin-Film Protective Coatings on Samples Manufactured by Direct Metal Laser Sintering Technology Used in Dentistry." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99769-4_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ji, S., H. Gui, G. Guan, M. Zhou, Q. Guo, and M. Y. J. Tan. "Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_14.

Full text
Abstract:
AbstractWaterborne coatings with intended functionalities have been designed by manipulating acrylic-based nanocomposites with different nanostructures. Taking advantage of the favorable structure of acrylic copolymers, three waterborne coatings with various desired properties were created through molecular engineering either by copolymerizing with other components or through nanocomposite formation. This approach was demonstrated by synthesizing acrylic-based waterborne coatings with three different nanostructures, namely homogeneous, worm-like, and spherical-like nanostructures. The properti
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Film samples"

1

Walsh, D., J. Seagoe, and L. Williams. "Microbiologically Influenced Corrosion of Stainless Steel Weldments; Attachment and Film Evolution." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92165.

Full text
Abstract:
Abstract This work treats the effects of welding, alloy composition, mechanical surface treatment and heat treatment on the susceptibility of several different stainless steels to Microbiologically Influenced Corrosion (MIC). Optical and scanning electron microscopy were used to document surface structure and microstructure. Quantitative microscopy was used to characterize microstructural constituent size, shape and distribution. Samples were autogenously welded, heat treated and surface conditioned. Samples were subsequently exposed to tap water in a recirculating system. At different interva
APA, Harvard, Vancouver, ISO, and other styles
2

Al-Muhanna, Khaled, Khaled Habib, and G. Louis Hornyak. "Monitoring the Growth of Marine Bio-films of Different Metallic Alloys in Seawater by Electrochemical Impedance Spectroscopy." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-10473.

Full text
Abstract:
Abstract The main purpose of this study was to monitor the growth of the marine bio-film, of micro/macro organisms, on the surface of different metallic alloys in seawater by electrochemical impedance spectroscopy (EIS). The alloys used in this study were; UNS 1020 carbon steel, stainless steel 304, stainless steel 316L, Sanicro 28, Cu–Ni 70–30, Hastelloy G-30, and titanium. The EIS was used to measure the A.C. Impedance (Z) and the double layer capacitance (Cdl) of the formed bio-film in seawater on a frequent basis. The total exposure time of the tests was ranged between 90 days to 180 days.
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, G., C. R. Clayton, R. A. Sadowski, J. R. Kearns, J. B. Gillow, and A. J. Francis. "Influence of Sulfate-Reducing Bacteria on the Passive Film Formed on Austenitic Stainless Steel AISI 304." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95217.

Full text
Abstract:
Abstract The influence of sulfate-reducing bacteria (SRB) on the passivity of a stainless steel, AISI 304, was investigated with X-ray photoelectron spectroscopy (XPS) and electrochemical techniques. Samples were exposed to SRB in growth media for 5 days. Potentiodynamic polarization tests were then conducted in deaerated 0.1 M HCl to determine if prior exposure to SRB compromised the passivity of the steel. The surface chemistry was analyzed with XPS, immediately after the exposure and following subsequent anodic polarization in 0.1 M HCl. Excess biomass generated by SRB could be rinsed from
APA, Harvard, Vancouver, ISO, and other styles
4

Natishan, P. M., F. J. Martin, M. S. McGovern, and W. E. O’Grady. "Insights on the Passivation of Alloys by Cold, Chlorinated Seawater." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06286.

Full text
Abstract:
Abstract X-ray photoelectron spectroscopy (XPS) studies on a duplex stainless steel, Zeron 100 (UNS S32760), showed differences in the oxide film composition for samples which received one of four treatments: cold, chlorinated seawater; cold seawater; ambient temperature chlorinated seawater; and ambient temperature seawater. The most evident difference was the amount of surface chloride with the cold, chlorinated seawater treated samples having the least chloride while the ambient temperature seawater treatment had the most. Further, the hydration of the oxide films for the exposure condition
APA, Harvard, Vancouver, ISO, and other styles
5

Faber, Ben, Britt Minch, and Eric Rodeheaver. "Evaluation and Comparison of Direct-to-Metal Acrylics as Rust Preventive Coatings." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4349.

Full text
Abstract:
Abstract Traditional rust preventive formulations utilize waxes and oils to leave a thin, temporary barrier film on a metal surface. The delicate and tacky nature of these chemistries may not be fit for every application and end users often seek alternatives that are more durable. Acrylic polymer films have been sought as a suitable replacement, providing a dry-to-touch alternative that offers ease of handling with acceptable corrosion protection. These types of coatings are already used in direct-to-metal protection applications and in many cases provide semi-permanent corrosion protection. T
APA, Harvard, Vancouver, ISO, and other styles
6

Svenningsen, Gaute, Attila Palencsár, and Jon Kvarekvål. "Investigation of Iron Sulfide Surface Layer Growth in Aqueous H2S/CO2 Environments." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09359.

Full text
Abstract:
Abstract The nature of the iron sulfide films formed on steel surfaces during H2S/CO2 corrosion is a key parameter for pH stabilisation in sour gas pipelines, and will also affect the efficiency of corrosion inhibitors. On this background, a series of systematic experimental studies of iron sulfide corrosion film growth in aqueous H2S/CO2 environments have been initiated. This contribution presents results obtained in the initial stages of these studies using gravimetric (mass loss) methods, FE-SEM and EDS. X65 carbon steel samples were exposed to sour conditions for various periods of time up
APA, Harvard, Vancouver, ISO, and other styles
7

Bacco, Ana, Britt Minch, Ben Faber, and Homero Castaneda. "Rust Preventive Film Characterization by Electrochemical Impedance Spectroscopy and the ASTM B117 Method." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02569.

Full text
Abstract:
Abstract Rust preventives were applied to steel coupons and characterized by electrochemical techniques and ASTM(1) B117 standard method using 5% sodium chloride as the electrolyte. The results obtained by both approaches are compared and used to explain the mechanism and damage evolution at the interface of rust preventive film and steel substrate. Electrochemical impedance spectroscopy (EIS) is a technique that has been used to quantify and characterize the mechanisms that occur when metal/film or metal/coating interfaces are exposed to corrosive environments. This work describes the methodo
APA, Harvard, Vancouver, ISO, and other styles
8

Hartwick, D., J. Richardson, and D. Bain. "Electron Microprobe Characterization of Corrosion Inhibitor Films at Anodic and Cathodic Sites." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91083.

Full text
Abstract:
Abstract Surface characterization of inhibitor films has been attempted on a variety of metal samples from both laboratory and operating plants. These were evaluated to determine regions of molybdate and zinc accumulation relative to anodic and cathodic areas. The presence of molybdate in pits is shown to follow anticipated patterns over a range of concentrations. It was also shown that a zinc specific chelant modifies the morphology of the corrosion inhibitor film. This film was shown to be a more effective barrier and resulted in lower corrosion rates.
APA, Harvard, Vancouver, ISO, and other styles
9

Zeszut, Ronald, David Rubino, and Douglas C. Hansen. "Comparison of Atmospheric Corrosion of Silver across Multiple Locations." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17621.

Full text
Abstract:
Abstract Atmospheric corrosion of silver from multiple beachfront sites in Florida was examined by coulometric reduction. Exposure was performed at the US Naval Research Laboratory in Key West, Kennedy Space Center, and Daytona Beach. Coupons were exposed for 3-18 months. Silver chloride and sulfide were identified and quantified by a galvanic reduction technique, which separately characterized the corrosion products on the front and back of each coupon. Differences were observed between sites for both chloride and sulfide growth rate. Silver chloride grew fastest at Daytona Beach, but no silv
APA, Harvard, Vancouver, ISO, and other styles
10

Habib, K. "Correlation between Electrochemical and Optical Techniques During Anodization of Aluminium Alloys." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07384.

Full text
Abstract:
Abstract In the present investigation, holographic interferometry was utilized for the first time to measure in situ the thickness of the oxide film, Alternating Current (A.C.) impedance and double layer capacitance of aluminium samples during anodization processes in aqueous solution without any physical contact. The anodization process (oxidation) of the aluminium samples was carried out by the Electrochemical Impedance Spectroscopy (EIS), in different concentrations of sulphuric acid (1.0-2.5 % H2SO4) at room temperature. In the mean time, the real-time holographic interferometry was used t
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Film samples"

1

Siripatrawan, Ubonratana. Active Chitosan-Based Film with Antimicrobial Property for Food Packaging Application. Chulalongkorn University, 2010. https://doi.org/10.58837/chula.res.2010.22.

Full text
Abstract:
This research was aimed to develop an active film from chitosan film incorporated with green tea extract to enhance antioxidant and antimicrobial properties in order to be used for food shelf life extension. The experiments were divided into 3 parts. Firstly, chitosan-based film preparation and modification were determined. The results suggested that the optimum chitosan films could be prepared from 2% chitosan in 1% acetic acid. However, the chitosan film was brittle and had low flexibility. Mechanical property of chitosan film was modified by adding different concentrations of glycerol, as a
APA, Harvard, Vancouver, ISO, and other styles
2

Salvador, Paul. Investigation of Cathode Electrocatalytic Activity using Surface Engineered Thin Film Samples and High Temperature Physical Property Measurements. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1235556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

สิริภัทราวรรณ, อุบลรัตน์, สุวัสสา พงษ์อำไพ та สุภาภรณ์ ดั๊กกลาส. การใช้ฟิล์มเคลือบบริโภคได้จากไคโตซานเพื่อยืดอายุการเก็บของผลิตภัณฑ์อาหารแช่เย็นพร้อมบริโภคได้ : รายงานการวิจัย. จุฬาลงกรณ์มหาวิทยาลัย, 2009. https://doi.org/10.58837/chula.res.2009.42.

Full text
Abstract:
The objective of this research was to use chitosan coating for shelf life extension of refridgerated ready-to-eat food product. The research was separated into 3 sections. Firstly, the optimum packaging material and condtion for packaging of brioled boneless por1&lt;. (BBP) was determined by using polypropylene bag under atmospheric air (OPP) and polyamide bag under atmospheric air (PA) and vacuum condition (PA-V) and stored at 2 ± 1 °C. The results suggested that PA-V could maintain qualities including color, texture, pH, peroxide values (POV) and organoleptic qualities of BBP better than PA
APA, Harvard, Vancouver, ISO, and other styles
4

Brennan, D. T., S. Parker, J. G. Mosolf, and A. Kylander-Clark. U-Pb Geochronology data from rock samples collected in the Butte North, Dillon, Phillipsburg, Polson, and Wisdom 30' x 60' quadrangles, western Montana, 2023-2024. Montana Bureau of Mines and Geology, 2025. https://doi.org/10.59691/txet7641.

Full text
Abstract:
n This file provides U-Pb zircon laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) geochronology data for rock samples from western Montana and eastern Idaho. All the samples were collected by personnel of the Montana Bureau of Mines and Geology (MBMG) or Idaho Geological Survey (IGS) collaborators in support of STATEMAP geologic mapping and miscellaneous research projects. Sample locations, attribute data, and a summary of analytical methods are provided in the file. Preliminary age determinations are provided for samples that yielded a coherent distribution of U-Pb dates
APA, Harvard, Vancouver, ISO, and other styles
5

Mosolf, J. G., A. Hanson, C. McDonald, S. Parker, and K. Scarberry. Major oxide and trace element analyses of rock samples collected in the Dillon and Wisdom 30' x 60' quadrangles, southwest Montana. Montana Bureau of Mines and Geology, 2023. http://dx.doi.org/10.59691/teof5831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shannon. L51584 Effect of Water Chemistry on Internal Corrosion Rates in Offshore Pipelines.pdf. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0010643.

Full text
Abstract:
This work is an extension of a program reported in 1984 to establish factors which control corrosion of API line pipe in gas containing carbon dioxide and water. In this phase of the program, there were four objectives. One was to establish the temperature of maximum corrosion in the range of 75�, 100� and 175�F at 1000 psi in water saturated with carbon dioxide at partial pressures of 15 and 50 psia. The next was to explore the role of carbon content and microstructure in the steel, iron carbonate film formation, and resulting corrosion rates. The third was to examine the role of pre-existing
APA, Harvard, Vancouver, ISO, and other styles
7

Waanders, Gerald. Palynology Evaluation Results From the Duchesne 30' x 60' Quadrangle, Duchesne and Wasatch Counties, Utah. Utah Geological Survey, 2023. http://dx.doi.org/10.34191/ofr-750.

Full text
Abstract:
This Open-File Report makes available data from palynology evaluations completed to determine the age and depositional environment of rock samples collected during geologic investigations funded or partially supported by the Utah Geological Survey (UGS) and the U.S. Geological Survey National Cooperative Geologic Mapping Program (STATEMAP). Table 1 provides the sample numbers and locations for the palynology data. The reference listed in table 1 provides additional information such as sample location, geologic setting, and interpretation of the samples in the context of the area where they wer
APA, Harvard, Vancouver, ISO, and other styles
8

Filkorn, Harry F. 40Ar/39Ar Geochronology Results From the Haycock Mountain, Little Creek Peak, and Panguitch Lake Quadrangles, Utah. Utah Geological Survey, 2023. http://dx.doi.org/10.34191/ofr-751.

Full text
Abstract:
This open-file report makes available raw analytical data from laboratory procedures completed to determine the age of rock samples collected during geologic investigations in southwestern Utah by Harry Filkorn (Pierce College, California) in 20182019. Table 1 provides sample identifications, locations, and notes for the age data. The references listed near the end of the document generally provide additional information such as sample location, geologic setting, and significance or interpretation of the samples in the context of the area where they were collected. This report was prepared by
APA, Harvard, Vancouver, ISO, and other styles
9

George, Darin. L52315 Testing of Environmentally-Friendly Gas Sampling Methods. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0010176.

Full text
Abstract:
Recent environmental concerns have led to calls for reduced hydrocarbon emissions to the atmosphere from a variety of sources. One source of emissions being examined in this regard is natural gas spot sampling methods that vent pipeline gases to the atmosphere. Some sampling techniques and equipment have been developed that do not emit greenhouse gases, but the need exists to test these methods for their ability to collect accurate, representative samples. Another related concern is the accuracy of samples drawn from streams near their hydrocarbon dew point (HDP). While the spot sampling metho
APA, Harvard, Vancouver, ISO, and other styles
10

McKean, Adam P., Zachary W. Anderson, Donald L. Clark, et al. Detrital Zircon U-Pb Geochronology Results for the Bountiful Peak, Coalville, James Peak, Mount Pisgah, Paradise, and Payson Lakes 7.5' Quadrangles, Utah. Utah Geological Survey, 2022. http://dx.doi.org/10.34191/ofr-743.

Full text
Abstract:
This Open-File Report makes available raw analytical data from laboratory analysis of U-Pb ages of zircon grains from samples collected during geologic mapping funded by the U.S. Geological Survey (USGS) National Cooperative Geologic Mapping Program (STATEMAP) and the Utah Geological Survey (UGS). The references listed in table 1 provide additional information such as sample location, geologic setting, and interpretation of the samples in the context of the area where they were collected. The data were prepared by the University of Utah Earth Core Facility (Diego Fernandez, Director), under co
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Film samples' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography