Log in

Relevant bibliographies by topics / Film strain gauges / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Film strain gauges.

Dissertations / Theses on the topic 'Film strain gauges'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'Film strain gauges.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Au, Daniel Tak Yin. "Evaporation cast thin film carbon nanotube strain gauges." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/44860.

Full text

Abstract:

This work describes the research performed on synthesising and measuring the gauge factor of evaporation cast thin film carbon nanotube strain gauges. The main characteristics pursued of the strain gauges are inexpensive, easily manufactured and reasonably sensitive. Carbon nanotubes have exhibited a high gauge factor due to their intrinsic piezoresistivity and were incorporated into evaporation cast films to try to take advantage of the high sensitivity. Another direction taken to improve the sensitivity is alignment of carbon nanotubes in the thin film. Previous work produced an evaporati

APA, Harvard, Vancouver, ISO, and other styles

2

Zheng, Yulan. "Characterisation and development of novel thick film strain gauges." Thesis, University of Southampton, 2003. https://eprints.soton.ac.uk/47490/.

Full text

Abstract:

The strain gauge is a physical sensor, in which the influence of an externally applied strain causes the resistance to undergo a reversible change. It can be applied to the measurement of force, pressure, and displacement etc. The thick film strain gauge is relatively new however and has been seen to have many advantages. System zero (offset) and system gain (sensitivity) are key characteristics of the strain gauges. Hence intensive research was carried out to study these two aspects of different construction types of thick film strain gauges, i.e. X-plane and Z-plane strain gauges. Different

APA, Harvard, Vancouver, ISO, and other styles

3

Djugum, Richard. "Novel fabrication processes for thin film vapour deposited strain gauges on mild steel." Australasian Digital Thesis Program, 2006. http://adt.lib.swin.edu.au/public/adt-VSWT20070424.115951/index.html.

Full text

Abstract:

Thesis (PhD) - Swinburne University of Technology, School of Engineering and Science, 2006.<br>A thesis submitted for the degree of Doctor of Philosophy, School of Engineering and Science, Swinburne University of Technology, 2006. Typescript. Includes bibliographical references (p. 125-138).

APA, Harvard, Vancouver, ISO, and other styles

4

Djugum, Richard, and n/a. "Novel fabrication processes for thin film vapour deposited strain gauges on mild steel." Swinburne University of Technology, 2006. http://adt.lib.swin.edu.au./public/adt-VSWT20070424.115951.

Full text

Abstract:

Pressure measurement using a strain gauge bonded with epoxy adhesive to a metallic mechanical support has been, and still is, extensively employed, however, for some applications the use of an epoxy is inadequate, especially when temperatures exceed 120C. There is therefore particular interest in the use of thin film techniques to vacuum deposit strain gauges directly on metallic substrates. Such devices are highly cost effective when produced in large quantities due to the manufacturing techniques involved. This makes them ideally suited for use in large-volume products such as electronic wei

APA, Harvard, Vancouver, ISO, and other styles

5

Intiang, Jittakant. "Use of triple beam resonant gauges in torque measurement transfer standard." Thesis, Brunel University, 2010. http://bura.brunel.ac.uk/handle/2438/4500.

Full text

Abstract:

A new torque transfer standard using metallic TBTF resonant sensor was developed to overcome the overload capability problem which occurs with conventional metallic resistance strain gauges. Previous research work, however, has shown that the first prototype of the metallic TBTF resonant sensor was not suitable for use in a torque transfer standard due to its size and subsequent sensitivity to parasitic lateral forces. To maximize the benefits from this sensor, particularly overload capability and long-term stability, in the high accuracy torque measurement application area, there is a need to

APA, Harvard, Vancouver, ISO, and other styles

6

Шуляренко, Д. О., та А. С. Овруцький. "Тензорезистивні властивості плівкових наносистем на основі пермалою та срібла як чутливих елементів тензодатчиків". Thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67874.

Full text

Abstract:

Величина магнітоопору залежить від таких факторів як матеріал компонент плівкової системи, метод та умови отримання, процеси дифузії та фазоутворення, інтервал термовідпалювання та ін. Детальне дослідження тензорезистивного ефекту в плівкових наносистемах відкриває перспективу створення на їх основі не тільки тензорезисторів і тензодатчиків, а й багатофункціональних сенсорів для одночасного контролю декількох фізичних параметрів.

APA, Harvard, Vancouver, ISO, and other styles

7

Бурик, І. П., Ю. М. Бабкін, Максим Миколайович Іващенко та ін. "Підвищення надійності вибухозахисних систем при застосуванні плівкових тензодатчиків". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/47175.

Full text

Abstract:

Забезпечити надійну безпеку персоналу шахт по всій мережі гірничих виробок можна шляхом гасіння спалахів метану або вугільного пилу безпосередньо в зоні їх виникнення. Для цього потрібні спеціальні засоби з примусовою подачею гасильного матеріалу в осередок спалаху (вибуху) у момент його виникнення.

APA, Harvard, Vancouver, ISO, and other styles

8

Grychanovska, T. M., Віталій Володимирович Бібик, Виталий Владимирович Бибик, Vitalii Volodymyrovych Bibyk, O. S. Gryschuk, and L. A. Sheshenya. "Strain Properties of Thin Film Systems Based on Ni and Ag." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35207.

Full text

Abstract:

Research results of influence of a uniform magnetic field by induction of 200 mT on the longitudinal gauge factor of nanocrystalline film systems of Ni/Ag/Ni with different thickness of non-magnetic layer of Ag within elastic deformation up to 1 are presented. The paper describes methods of forming three-layer structure based on thin films Ni and Ag and research of the structure and phase composition of the obtained samples. The correlation between the factor value of the longitudinal gauge and structural-phase state of film systems is set. When you are citing the document, use the follo

APA, Harvard, Vancouver, ISO, and other styles

9

Макуха, Зінаїда Миколаївна, Зинаида Николаевна Макуха, Zinaida Mykolaivna Makukha, et al. "Strain Properties of Nanodimentional Thin Film Systems Based on Ag and Co." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34874.

Full text

Abstract:

The results of research strain deformation properties of thin films Ag, Co and two-layer film systems Ag/Co in the range of deformation l 0 – 1% were presented. The plastic deformation in Co layer caused a similar deformation in the entire film system, even if the strain range of Ag layer is not reached the limits of the transition elastic/plastic deformation. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/34874

APA, Harvard, Vancouver, ISO, and other styles

10

Гричановська, Тетяна Михайлівна, Татьяна Михайловна Гричановская, Tetiana Mykhailivna Hrychanovska, et al. "Strain Properties of Thin Films Based on Ni and Ag in External Magnetic Field." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42685.

Full text

Abstract:

The paper describes the research results of influence of an external magnetic field with 200 mT induction on the longitudinal gauge factor of nano-crystalline film systems of Ni and Ag with different thickness of non-magnetic layer of Ag (or Ni) within elastic deformation up to 1% are presented. Considered methods of forming double- and triplex-layer structure based on thin films Ni and Ag and research of the structure and phase composition of the obtained samples. The correlation between the factor value of the longitudinal gauge factor, structural-phase state of film systems and total thick

APA, Harvard, Vancouver, ISO, and other styles

11

Bu, Lei. "Computational and experimental studies of strain sensitive carbon nanotube films." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-156473.

Full text

Abstract:

The excellent electrical and mechanical properties of carbon nanotubes (CNTs) provide interesting opportunities to realize new types of strain gauges. However, there are still challenges for the further development of CNT film strain gauges, for instance the lack of design rules, the homogeneity, stability and reproducibility of CNT films. This thesis aims to address these issues from two sides: simulation and experiment. Monte Carlo simulations show that both the sheet resistance and gauge factor of CNT films are determined essentially by the two-dimensional exclude area of CNTs. It was shown

APA, Harvard, Vancouver, ISO, and other styles

12

Рилова, А. К., та А. С. Кулак. "Датчики деформації на основі плівкових матеріалів". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/44046.

Full text

Abstract:

Серед електронних датчиків деформації найбільшого поширення набули тензорезистивні датчики. В основі їх роботи лежить явище тензоефекту, яке полягає у зміні величини електричного опору матеріалу при його механічній деформації.

APA, Harvard, Vancouver, ISO, and other styles

13

Coudouel, Denis. "Conception d'un dispositif de pesage innovant pour véhicule en mouvement et fabrication de transducteurs en couches épaisses." Thesis, Montpellier 2, 2013. http://www.theses.fr/2013MON20135.

Full text

Abstract:

Cette thèse de doctorat porte sur l'étude et la réalisation d'une plateforme de pesage dynamique pour véhicule roulant basée sur un concept d'intégration de la charge. Ce concept est mis en œuvre en vue de pouvoir minimiser la taille et l'encombrement de ce type de dispositif tout en effectuant des pesées présentant des caractéristiques métrologiques acceptables. Nous démontrons tout d'abord au travers de la réalisation d'un prototype et de plusieurs campagnes d'essais, la faisabilité de la méthode utilisée. Nous évaluons dans un deuxième temps les performances présentées par le prototype lors

APA, Harvard, Vancouver, ISO, and other styles

14

Langlois, Patrick. "Contribution à l'élaboration de capteurs de pression à jauges de contrainte en couches minces de Constantan." Rouen, 1987. http://www.theses.fr/1987ROUES039.

Full text

Abstract:

Elaboration de capteurs utilisables sur une large plage de température. Description des procédures et conditions de travail qui ont permis de réaliser un tel dispositif. Principales caractéristiques des capteurs, moyens de mesure et résultats obtenus. La conclusion met en évidence l'intérêt industriel d'un tel dispositif

APA, Harvard, Vancouver, ISO, and other styles

15

Rajendra, A. "Pressure Sensor Development Using Hard Anodized Aluminum Diaphragm And Thin Film Strain Gauges." Thesis, 2006. https://etd.iisc.ac.in/handle/2005/344.

Full text

Abstract:

The sensor is a device that converts a form of energy concerning which the information is sought, called the measurand, to a form (electrical) in which it can be usefully processed or interpreted. Sensors rely on physical or chemical phenomena and materials where those phenomena appear to be useful. Those phenomena may concern the material itself or its geometry. Hence, the major innovations in sensors come from new materials, new fabrication techniques or both. Normally, thin film sensors are realized by depositing a sensing film on a suitable substrate. There could be many combination of

APA, Harvard, Vancouver, ISO, and other styles

16

Rajendra, A. "Pressure Sensor Development Using Hard Anodized Aluminum Diaphragm And Thin Film Strain Gauges." Thesis, 2006. http://hdl.handle.net/2005/344.

Full text

Abstract:

The sensor is a device that converts a form of energy concerning which the information is sought, called the measurand, to a form (electrical) in which it can be usefully processed or interpreted. Sensors rely on physical or chemical phenomena and materials where those phenomena appear to be useful. Those phenomena may concern the material itself or its geometry. Hence, the major innovations in sensors come from new materials, new fabrication techniques or both. Normally, thin film sensors are realized by depositing a sensing film on a suitable substrate. There could be many combination of me

APA, Harvard, Vancouver, ISO, and other styles

17

Stephen, R. John. "Development And Performance Study Of Ion Thrust Measurement System Using Strain Gauge Sensors." Thesis, 2005. https://etd.iisc.ac.in/handle/2005/1463.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Stephen, R. John. "Development And Performance Study Of Ion Thrust Measurement System Using Strain Gauge Sensors." Thesis, 2005. http://etd.iisc.ernet.in/handle/2005/1463.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Petley, Vijay Uttamrao. "Material and Mechanical Aspects of Thin Film Coatings for Strain Sensing Application on Aero Engines." Thesis, 2017. http://etd.iisc.ac.in/handle/2005/4273.

Full text

Abstract:

Aero engines are one of the most complex machines on this planet and have propelled the necessity of advanced material technologies. Health monitoring of the engine is performed by a variety of sensors and amongst these strain sensor is very important as it aids in evaluating the stresses experienced by the body. Unlike conventional foil gauge which tends to debond under hostile environments in the engine like high rpm of blades, temperature, mass flow, etc, thin film based strain gauges are likely to exhibit better adhesion on the substrates. The usage of Ni-Cr thin films in strain gauge sen

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!