Journal articles: 'Films layer-by-layer'

1

Lin, Y. H., C. Jiang, J. Xu, Z. Lin, and V. V. Tsukruk. "Sculptured Layer-by-Layer Films." Advanced Materials 19, no. 22 (November 19, 2007): 3827–32. http://dx.doi.org/10.1002/adma.200700942.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Decher, Gero, Michel Eckle, Johannes Schmitt, and Bernd Struth. "Layer-by-layer assembled multicomposite films." Current Opinion in Colloid & Interface Science 3, no. 1 (February 1998): 32–39. http://dx.doi.org/10.1016/s1359-0294(98)80039-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Raposo, Maria, and Osvaldo N. Oliveira Jr. "Adsorption mechanisms in layer-by-layer films." Brazilian Journal of Physics 28, no. 4 (December 1998): 00. http://dx.doi.org/10.1590/s0103-97331998000400014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhuk, Aliaksandr, Robert Mirza, and Svetlana Sukhishvili. "Multiresponsive Clay-Containing Layer-by-Layer Films." ACS Nano 5, no. 11 (October 7, 2011): 8790–99. http://dx.doi.org/10.1021/nn202812a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chen, Dongdong, Mingda Wu, Bochao Li, Kefeng Ren, Zhongkai Cheng, Jian Ji, Yang Li, and Junqi Sun. "Layer-by-Layer-Assembled Healable Antifouling Films." Advanced Materials 27, no. 39 (August 25, 2015): 5882–88. http://dx.doi.org/10.1002/adma.201501726.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kharlampieva, Eugenia, and Svetlana A. Sukhishvili. "Hydrogen‐Bonded Layer‐by‐Layer Polymer Films." Journal of Macromolecular Science, Part C: Polymer Reviews 46, no. 4 (December 2006): 377–95. http://dx.doi.org/10.1080/15583720600945386.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hidalgo-Acosta, Jonnathan C., Micheál D. Scanlon, Manuel A. Méndez, Véronique Amstutz, Heron Vrubel, Marcin Opallo, and Hubert H. Girault. "Boosting water oxidation layer-by-layer." Physical Chemistry Chemical Physics 18, no. 13 (2016): 9295–304. http://dx.doi.org/10.1039/c5cp06890h.

Full text

Abstract:

Electrocatalysis of water oxidation was achieved using fluorinated tin oxide (FTO) electrodes modified with layer-by-layer deposited films consisting of bilayers of negatively charged citrate-stabilized IrO₂ NPs and positively charged poly(diallyldimethylammonium chloride) (PDDA) polymer.

APA, Harvard, Vancouver, ISO, and other styles

8

Wang, Benjamin N., David Olmeijer, Rajul Shah, and Kevin C. Krogman. "Highly durable spray layer-by-layer assembled films." Surface Innovations 1, no. 2 (June 2013): 92–97. http://dx.doi.org/10.1680/si.12.00010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

dos Santos, Kevin F., Romário J. da Silva, Karla B. Romio, Paula C. S. Souto, Josmary R. Silva, and Nara C. de Souza. "Spray layer-by-layer films for photodynamic inactivation." Photodiagnosis and Photodynamic Therapy 15 (September 2016): 197–201. http://dx.doi.org/10.1016/j.pdpdt.2016.06.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Zhang, Jianfu, Dongdong Chen, Yang Li, and Junqi Sun. "Layer-by-layer assembled highly adhesive microgel films." Polymer 54, no. 16 (July 2013): 4220–26. http://dx.doi.org/10.1016/j.polymer.2013.06.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Andres, Christine M., and Nicholas A. Kotov. "Inkjet Deposition of Layer-by-Layer Assembled Films." Journal of the American Chemical Society 132, no. 41 (October 20, 2010): 14496–502. http://dx.doi.org/10.1021/ja104735a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Shi, F., Z. Liu, G. L. Wu, M. Zhang, H. Chen, Z. Q. Wang, X. Zhang, and I. Willner. "Surface Imprinting in Layer-by-Layer Nanostructured Films." Advanced Functional Materials 17, no. 11 (July 23, 2007): 1821–27. http://dx.doi.org/10.1002/adfm.200700267.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Waenkaew, Paralee, Sukon Phanichphant, and Rigoberto C. Advincula. "Electropolymerization of layer-by-layer precursor polymer films." Polymers for Advanced Technologies 22, no. 5 (February 14, 2011): 753–58. http://dx.doi.org/10.1002/pat.1886.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Hu, Xiaoran, Ethan McIntosh, Marc G. Simon, Cristian Staii, and Samuel W. Thomas. "Stimuli-Responsive Free-Standing Layer-By-Layer Films." Advanced Materials 28, no. 4 (November 30, 2015): 715–21. http://dx.doi.org/10.1002/adma.201504219.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Kim, Sung-Hoon, Chunyang Yu, Chang-Ju Shin, and Myung-Shik Choi. "Photochromic layer-by-layer films of spiroxazine polymer." Dyes and Pigments 75, no. 1 (January 2007): 250–52. http://dx.doi.org/10.1016/j.dyepig.2006.06.036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

HUSSAIN, S. A., D. DEY, and D. BHATTACHARJEE. "LAYER-BY-LAYER SELF-ASSEMBLED FILMS OF ROSE BENGAL." International Journal of Modern Physics B 25, no. 29 (November 20, 2011): 4039–46. http://dx.doi.org/10.1142/s0217979211101028.

Full text

Abstract:

Layer-by-Layer (LBL) self-assembled films of rose bengal (RB) have been fabricated onto quartz substrate by the alternative adsorption of polycation poly (amine hydrochloride) (PAH) and RB. UV–Vis absorption studies reveal the formation of RB dimmer in PAH-RB LbL films. Scanning Electron Micrograph (SEM) picture confirms the aggregation of RB molecules in LbL films. Almost 15 min is required to complete the interaction between RB and PAH molecules in the 1 bilayer LbL film. The dye (RB) was found to come off the film during the subsequent poly cation (PAH) deposition. As an alternative approach RB was anchored to the polycation PAH via physiadsorption and controlling the concentration of the combination of RB and PAH was used as polycation and poly (acrylic acid) (PAA) as polyanion for film deposition. The absorption spectra after each deposition showed that there was no material loss during layer depositions via second method.

APA, Harvard, Vancouver, ISO, and other styles

17

Gomonay, O. V., and I. Lukyanchuk. "The Anisotropy Induced by a Magnetostriction in Exchange-Biased Two-Layer Films." METALLOFIZIKA I NOVEISHIE TEKHNOLOGII 36, no. 11 (September 8, 2016): 1453–64. http://dx.doi.org/10.15407/mfint.36.11.1453.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Assunção, Ivan, Susana Sério, Quirina Ferreira, Nykola Jones, Søren Hoffmann, Paulo Ribeiro, and Maria Raposo. "Graphene Oxide Layer-by-Layer Films for Sensors and Devices." Nanomaterials 11, no. 6 (June 12, 2021): 1556. http://dx.doi.org/10.3390/nano11061556.

Full text

Abstract:

Layer-by-layer films of poly (allylamine hydrochloride) (PAH) and graphene oxide (GO) were characterized, looking at growth with the number of bilayers, morphology, and electrical properties. The PAH/GO films revealed a linear increase in absorbance with the increase in the number of deposited bilayers, allowing the determination that 10.7 ± 0.1 mg m−2 of GO is adsorbed per unit of area of each bilayer. GO absorption bands at 146, 210, 247 and 299 nm, assigned to π-π* and n-π* transitions in the aromatic ring (phenol) and of the carboxylic group, respectively, were characterized by vacuum ultraviolet spectroscopy. The morphological characterization of these films demonstrated that they are not completely uniform, with a bilayer thickness of 10.5 ± 0.7 nm. This study also revealed that the films are composed of GO and/or PAH/GO fibers and that GO is completely adsorbed on top of PAH. The electrical properties of the films reveal that PAH/GO films present a semiconductor behavior. In addition, a slight decrease in conduction was observed when films were prepared in the presence of visible light, likely due to the presence of oxygen and moisture that contributes to the damage of GO molecules.

APA, Harvard, Vancouver, ISO, and other styles

19

Han, Tae-Hwan, Eun-Sook Lee, Tae-Hoon Ko, Min-Kang Seo, Hak-Yong Kim, Hyo Jung Kim, and Byoung-Suhk Kim. "Hierarchically Assembled Nanofibers Created by a Layer-by-Layer Self-Assembly." Journal of Nanoscience and Nanotechnology 16, no. 4 (April 1, 2016): 4080–85. http://dx.doi.org/10.1166/jnn.2016.10846.

Full text

Abstract:

We report the hierarchically assembled nanofibers created by LbL self-assembly depending on the PSS-PAA fraction in the blend solutions and pH during bulid-up of the PAH/(PSS-PAA) multilayer films. The multilayer [(PEI/blend)/(PAH/blend)4] films with ρPAA (PSS-PAA fraction in the blend solutions) = 0.0 in the blend solution exhibited surface morphologies of randomly isolated globular clusters, while at ρPAA = 0.75, worm-like morphologies were observed. Interestingly, the multilayer [(PEI/blend)/(PAH/blend)4] films with ρPAA = 0.9 exhibited unique fibrous morphologies with the diameter of about 50 nm at narrower pH range from 3.5 to 4.2, but also the fiber diameter distribution was narrower. Based on the thickness from the X-ray reflectivity, the thickness of the one bilayer multilayer film seemed to be 8.6 nm. The 3 bilayers multilayer film seemed to be formed as islands with very large roughness. The crystal sizes of the 3 bilayers and 5 bilayers multilayer films were about 71 nm and 123 nm, respectively. The resultant films were characterized using atomic force microscopy (AFM) and real-time in situ X-ray scattering measurements.

APA, Harvard, Vancouver, ISO, and other styles

20

Fu, Yu, Zilong Xiang, Jun Zhou, Xinwei Wu, Yan Li, and Yonghua Jiao. "Layer-by-layer Films by Halogen Bonding for Selective Adsorption." Acta Chimica Sinica 70, no. 17 (2012): 1847. http://dx.doi.org/10.6023/a12060299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Zhang, Xianhua, Shaobo Ou-yang, Jiaolong Wang, Lan Liao, Runfa Wu, and Junchao Wei. "Construction of Antibacterial Surface Via Layer-by-Layer Method." Current Pharmaceutical Design 24, no. 8 (May 14, 2018): 926–35. http://dx.doi.org/10.2174/1381612824666180219125655.

Full text

Abstract:

Construction of antibacterial surfaces or films is of great interest in various fields including biomedicine, food, agriculture and so on. So far, a number of antibacterial agents have been used to construct antibacterial surfaces. Layer-by-Layer (LbL) assembly is a simple and versatile deposition process for fabricating multilayer thin films with great advantages to control the architecture and composition of the films. In this review, we give a brief introduction of LbL, and different materials used to fabricate antibacterial surfaces with LbL assembly approach are described as well as their drawbacks. Much attention is also paid to the recent development of multifunctional and intelligent antibacterial surfaces. Moreover, the advantages and limitations of these different types of antibacterial materials are summarized and subsequently directions for future development are proposed.

APA, Harvard, Vancouver, ISO, and other styles

22

Shariffudin, Shafinaz Sobihana, Sukreen Hana Herman, and Mohamad Rusop. "Layer-by-Layer Nanoparticles ZnO Thin Films Prepared by Sol-Gel Method." Advanced Materials Research 403-408 (November 2011): 1178–82. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.1178.

Full text

Abstract:

Nanoparticles ZnO thin films have been deposited using sol-gel spin coating technique. A 0.4M sol of ZnO had been prepared by dissolving zinc acetate dihydrate in monoethanolamine (MEA), and 2-methoxyethanol as a stabilizer. Thin films are then spin coated onto quartz substrate with rotation speed of 3000rpm. After each layer, the samples were heated at 150 oC and annealed at 550 oC; which are defined as layer-by-layer process. The aim of this paper is to study the effect of annealing time to the structural, electrical and optical properties of the films. XRD result shows highest peak observed from sample annealed for 1 hour at (102) and (002) orientation. Calculation shows that the film annealed for 1 hour gives lower resistivity at 92.29Ω.cm which is due to the oxygen adsorption and good crystalline quality. Photoluminescence measurements exhibit UV emission centred at 380 nm and yellow-orange emission centred at 580 nm. Optical transmittance of the films show transparency above 70% for sample annealed for 30 minutes.

APA, Harvard, Vancouver, ISO, and other styles

23

Chen, Xiaodong, Jie Lang, and Minghua Liu. "Layer-by-layer assembly of DNA-dye complex films." Thin Solid Films 409, no. 2 (April 2002): 227–32. http://dx.doi.org/10.1016/s0040-6090(02)00045-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

DeLongchamp, Dean M., and Paula T. Hammond. "Fast Ion Conduction in Layer-By-Layer Polymer Films." Chemistry of Materials 15, no. 5 (March 2003): 1165–73. http://dx.doi.org/10.1021/cm020945a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

DeLongchamp, Dean M., Mark Kastantin, and Paula T. Hammond. "High-Contrast Electrochromism from Layer-By-Layer Polymer Films." Chemistry of Materials 15, no. 8 (April 2003): 1575–86. http://dx.doi.org/10.1021/cm021045x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Zucolotto, V., M. Ferreira, M. R. Cordeiro, C. J. L. Constantino, W. C. Moreira, and O. N. Oliveira. "Electroactive Layer-by-Layer Films of Iron Tetrasulfonated Phthalocyanine." Synthetic Metals 137, no. 1-3 (April 2003): 945–46. http://dx.doi.org/10.1016/s0379-6779(02)00942-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Pauthe, Emmanuel, and Paul R. Van Tassel. "Layer-by-layer films as biomaterials: bioactivity and mechanics." Journal of Biomaterials Science, Polymer Edition 25, no. 14-15 (June 4, 2014): 1489–501. http://dx.doi.org/10.1080/09205063.2014.921096.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Dante, Silvia, Rigoberto Advincula, Curtis W. Frank, and Pieter Stroeve. "Photoisomerization of Polyionic Layer-by-Layer Films Containing Azobenzene." Langmuir 15, no. 1 (January 1999): 193–201. http://dx.doi.org/10.1021/la980497e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Nishiyama, Fumitaka, Takashi Yokoyama, Toshiya Kamikado, Shiyoshi Yokoyama, and Shinro Mashiko. "Layer-by-layer growth of porphyrin supramolecular thin films." Applied Physics Letters 88, no. 25 (June 19, 2006): 253113. http://dx.doi.org/10.1063/1.2216036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

de Oliveira, Rafael Furlan, Marli Leite de Moraes, Osvaldo N. Oliveira, and Marystela Ferreira. "Exploiting Cascade Reactions in Bienzyme Layer-by-Layer Films." Journal of Physical Chemistry C 115, no. 39 (September 13, 2011): 19136–40. http://dx.doi.org/10.1021/jp207610w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Oh, Sooyeoun, Byung-Jae Kim, and Jihyun Kim. "Layer-by-layer AuCl3 doping of stacked graphene films." physica status solidi (RRL) - Rapid Research Letters 8, no. 5 (March 20, 2014): 441–44. http://dx.doi.org/10.1002/pssr.201409085.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Clark, Sarah L., and Paula T. Hammond. "Engineering the Microfabrication of Layer-by-Layer Thin Films." Advanced Materials 10, no. 18 (December 1998): 1515–19. http://dx.doi.org/10.1002/(sici)1521-4095(199812)10:18<1515::aid-adma1515>3.0.co;2-e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Serpe, Michael J., Clinton D. Jones, and L. Andrew Lyon. "Layer-by-Layer Deposition of Thermoresponsive Microgel Thin Films." Langmuir 19, no. 21 (October 2003): 8759–64. http://dx.doi.org/10.1021/la034391h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Zhuk, Aliaksandr, Svetlana Pavlukhina, and Svetlana A. Sukhishvili. "Hydrogen-Bonded Layer-by-Layer Temperature-Triggered Release Films†." Langmuir 25, no. 24 (December 15, 2009): 14025–29. http://dx.doi.org/10.1021/la901478v.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Blacklock, Jenifer, Guangzhao Mao, David Oupický, and Helmuth Möhwald. "DNA Release Dynamics from Bioreducible Layer-by-Layer Films." Langmuir 26, no. 11 (June 2010): 8597–605. http://dx.doi.org/10.1021/la904673r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Wijeratne, Salinda, Merlin L. Bruening, and Gregory L. Baker. "Layer-by-Layer Assembly of Thick, Cu2+-Chelating Films." Langmuir 29, no. 41 (October 3, 2013): 12720–29. http://dx.doi.org/10.1021/la402633x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Gu, Hao, Rongji Dai, Yen Wei, and Hai-Feng Ji. "Functional layer-by-layer multilayer films for ion recognition." Analytical Methods 5, no. 14 (2013): 3454. http://dx.doi.org/10.1039/c3ay40372f.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Zhu, Yu, and James M. Tour. "Graphene Nanoribbon Thin Films Using Layer-by-Layer Assembly." Nano Letters 10, no. 11 (November 10, 2010): 4356–62. http://dx.doi.org/10.1021/nl101695g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

An, Qi, Tao Huang, and Feng Shi. "Covalent layer-by-layer films: chemistry, design, and multidisciplinary applications." Chemical Society Reviews 47, no. 13 (2018): 5061–98. http://dx.doi.org/10.1039/c7cs00406k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Carvalho, A. L., A. C. Vale, M. P. Sousa, A. M. Barbosa, E. Torrado, J. F. Mano, and N. M. Alves. "Antibacterial bioadhesive layer-by-layer coatings for orthopedic applications." Journal of Materials Chemistry B 4, no. 32 (2016): 5385–93. http://dx.doi.org/10.1039/c6tb00841k.

Full text

Abstract:

In this study, thin LbL films were produced by combining the adhesive properties of the hyaluronic acid–dopamine conjugate with the bioactivity and bactericidal properties of silver doped bioactive glass nanoparticles.

APA, Harvard, Vancouver, ISO, and other styles

41

Fujita, Shiro, and Seimei Shiratori. "Waterproof Anti Reflection Films Fabricated by Layer-by-Layer Adsorption Process." Japanese Journal of Applied Physics 43, no. 4B (April 27, 2004): 2346–51. http://dx.doi.org/10.1143/jjap.43.2346.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Jung, Arum, Nari Ha, Nayeon Kim, Jinwoo Oh, Jeong Gon Son, Hyung-Kyu Lim, and Bongjun Yeom. "Multiple Transfer of Layer-by-Layer Nanofunctional Films by Adhesion Controls." ACS Applied Materials & Interfaces 11, no. 51 (November 26, 2019): 48476–86. http://dx.doi.org/10.1021/acsami.9b13203.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Li, Yan, Xiaoyan Chen, Qianqian Li, Kai Song, Shihui Wang, Xiaoyan Chen, Kai Zhang, et al. "Layer-by-Layer Strippable Ag Multilayer Films Fabricated by Modular Assembly." Langmuir 30, no. 2 (January 6, 2014): 548–53. http://dx.doi.org/10.1021/la4045557.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Schulze, Kerstin, and Stefan Kirstein. "Layer-by-layer deposition of TiO2 nanoparticles." Applied Surface Science 246, no. 4 (June 2005): 415–19. http://dx.doi.org/10.1016/j.apsusc.2004.11.064.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Neves, Márcia C., Angela S. Pereira, Marco Peres, Andréi L. Kholkin, Teresa Monteiro, and Tito Trindade. "Layer-by-Layer Deposition of Organically Capped Quantum Dots." Materials Science Forum 514-516 (May 2006): 1111–15. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.1111.

Full text

Abstract:

Cadmium chalcogenide quantum dots (QD’s) were synthesised using a single source approach while zinc oxide QD’s were obtained by a colloidal technique. In both situations the dots were surface capped with tri-octylphosphine oxide (TOPO) hence leading to nanodispersed systems in organic solvents such as toluene. The organically capped QD’s (CdSe, CdS and ZnO) were used as building-units to fabricate LbL (layer-by-layer) films on glass and quartz substrates. A linear increase in the visible light absorbance (due to the QD’s) with the number of deposited layers indicates that multi-layered systems have been fabricated. In order to investigate the effect of the LbL manipulation on the integrity of the QD’s, comparative studies on the optical properties of the starting QD’s and the nanostructured films have been performed. The observation of quantum size effects in both cases suggests minimal degradation of the QD’s though clustering had probably occurred, a point which was further confirmed by AFM analysis.

APA, Harvard, Vancouver, ISO, and other styles

46

Alkekhia, Dahlia, Paula T. Hammond, and Anita Shukla. "Layer-by-Layer Biomaterials for Drug Delivery." Annual Review of Biomedical Engineering 22, no. 1 (June 4, 2020): 1–24. http://dx.doi.org/10.1146/annurev-bioeng-060418-052350.

Full text

Abstract:

Controlled drug delivery formulations have revolutionized treatments for a range of health conditions. Over decades of innovation, layer-by-layer (LbL) self-assembly has emerged as one of the most versatile fabrication methods used to develop multifunctional controlled drug release coatings. The numerous advantages of LbL include its ability to incorporate and preserve biological activity of therapeutic agents; coat multiple substrates of all scales (e.g., nanoparticles to implants); and exhibit tuned, targeted, and/or responsive drug release behavior. The functional behavior of LbL films can be related to their physicochemical properties. In this review, we highlight recent advances in the development of LbL-engineered biomaterials for drug delivery, demonstrating their potential in the fields of cancer therapy, microbial infection prevention and treatment, and directing cellular responses. We discuss the various advantages of LbL biomaterial design for a given application as demonstrated through in vitro and in vivo studies.

APA, Harvard, Vancouver, ISO, and other styles

47

Kimura, Shin-ichi, Hiroyuki Kusano, Masahiko Kitagawa, and Hiroshi Kobayashi. "Layer-by-layer characterization of cellulose Langmuir–Blodgett monolayer films." Applied Surface Science 142, no. 1-4 (April 1999): 585–90. http://dx.doi.org/10.1016/s0169-4332(98)00923-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Huguenin, Fritz, Valtencir Zucolotto, Antonio J. F. Carvalho, Ernesto R. Gonzalez, and Osvaldo N. Oliveira. "Layer-by-Layer Hybrid Films Incorporating WO3, TiO2, and Chitosan." Chemistry of Materials 17, no. 26 (December 2005): 6739–45. http://dx.doi.org/10.1021/cm051113q.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Arregui, Francisco J., Ignacio R. Matias, Jesús M. Corres, Ignacio Del Villar, Javier Goicoechea, Carlos Ruiz Zamarreño, Miguel Hernáez, and Richard O. Claus. "Optical fiber sensors based on Layer-by-Layer nanostructured films." Procedia Engineering 5 (2010): 1087–90. http://dx.doi.org/10.1016/j.proeng.2010.09.299.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Sasaki, Takayoshi, Yasuo Ebina, Tomohiro Tanaka, Masaru Harada, Mamoru Watanabe, and Gero Decher. "Layer-by-Layer Assembly of Titania Nanosheet/Polycation Composite Films." Chemistry of Materials 13, no. 12 (December 2001): 4661–67. http://dx.doi.org/10.1021/cm010478h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Films layer-by-layer'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles