Relevant bibliographies by topics / Finish

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Finish'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Finish.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Finish"

1

Papp, Theresa A. "Finnish Lessons to Help Canadian Students Finish." International Journal of Learning, Teaching and Educational Research 17, no. 6 (2018): 94–111. http://dx.doi.org/10.26803/ijlter.17.6.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Berber, Mark J. "FINISH." Journal of Clinical Psychiatry 59, no. 5 (1998): 255. http://dx.doi.org/10.4088/jcp.v59n0509b.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gaide, Peter. "Finish." Automotive Agenda 5, no. 2 (2012): 3. http://dx.doi.org/10.1365/s35777-012-0106-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Galperin, Michael Y. "To finish or not to finish?" Environmental Microbiology 7, no. 8 (2005): 1061–64. http://dx.doi.org/10.1111/j.1462-2920.2005.00879.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dhingra, Piyush, and Charanjit Singh. "Internal Surface Enhancement by Magnetic Abrasive Finishing of Brass Pipe at Different Speeds and Particle Composition." International Journal for Research in Applied Science and Engineering Technology 10, no. 11 (2022): 377–87. http://dx.doi.org/10.22214/ijraset.2022.47319.

Full text
Abstract:
Abstract: This study examined the effect of magnetic field on the interior surface finish of Brass UNS C26800 pipe. The parameters sliding velocity of electromagnets, concentration ratio (castor oil and magnetic abrasive particles), and number of cycles were modified within a predetermined range, and their effects on surface finish (%Ra) and material removal rate were determined (MRR). The remaining process parameters remained unchanged throughout the duration of the experiment. In the case of 7:3 and 8:1 concentration ratios, the percentage improvement in surface finish (%Ra) increases and su
APA, Harvard, Vancouver, ISO, and other styles
6

Townsend, Robert J. "Finish the Pull to Finish the Throw." Strength and Conditioning Journal 21, no. 3 (1999): 66. http://dx.doi.org/10.1519/00126548-199906000-00017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Skloot, Floyd. "The Finish." Hopkins Review 9, no. 3 (2016): 386. http://dx.doi.org/10.1353/thr.2016.0079.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rubin, James P. "START Finish." Foreign Policy, no. 76 (1989): 96. http://dx.doi.org/10.2307/1148920.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Higgins, Roy, and Walter Bacon. "The finish." IEE Review 35, no. 8 (1989): 297. http://dx.doi.org/10.1049/ir:19890134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ahead, Sunny Skies. "Photo Finish." Lighting Design + Application 47, no. 6 (2017): 68. https://doi.org/10.1177/036063251704700622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Finish"

1

Cardoso, Pedro Alexandre Louro. "Surface finish in micromilling." Master's thesis, Universidade de Aveiro, 2008. http://hdl.handle.net/10773/2471.

Full text
Abstract:
Mestrado em Engenharia Mecânica<br>A presente investigação contempla a realização de um estudo experimental usando um centro de maquinagem CNC convencional. Foi simulada e concebida a microfresagem de diversos provetes recorrendo a software CAD/CAM, usando diversas estratégias. Foi analisado o acabamento de superfície obtido bem como o tipo de rebarba produzido. Finalmente, foi efectuada uma optimização do processo de microfresagem. ABSTRACT: The present investigation contemplates the realization of an experimental study using a convencional machining CNC centre. The micromilling of
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Jianguo. "Global Finish Curvature Matched Machining." Diss., CLICK HERE for online access, 2005. http://contentdm.lib.byu.edu/ETD/image/etd1102.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

HEABERLIN, CLIFF. "WEATHERING: THE EVER-CHANGING FINISH." University of Cincinnati / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1085544759.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Heaberlin, Cliff. "Weathring the ever-changing finish /." Cincinnati, Ohio : University of Cincinnati, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=ucin1085544759.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lehtonen, Annukka I. "Finnish or Finish? : children's use of orthographic, morphological and phonemic knowledge in spelling acquisition." Thesis, University of Oxford, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Setterberg, Petter. "Designing a Game Weapon : Start to Finish." Thesis, Högskolan i Gävle, Avdelningen för Industriell utveckling, IT och Samhällsbyggnad, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-22548.

Full text
Abstract:
The workflow of different game modelling artists is explored, with the goal of creating a melee weapon designed for games. A low polygon weapon was created using the research into the most common components from professional workflows of creating game models. One of the goals for the paper was to obtain a greater understanding of professional workflows when creating models for games. Other goals were to utilize the research and design a finished game model from concept to end product.
APA, Harvard, Vancouver, ISO, and other styles
7

Godbey, Brady Blackburne. "Surface finish control of 3D printed metal tooling." Connect to this title online, 2007. http://etd.lib.clemson.edu/documents/1202498467/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hardy, Charlotte L. "Nice guys finish first : the competitive altruism hypothesis." Thesis, University of Kent, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.445722.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Manuel, Deepak. "CNC tool path generation for finish milling convex pockets." Thesis, University of Ottawa (Canada), 1995. http://hdl.handle.net/10393/10354.

Full text
Abstract:
Production efficiency has increased considerably due to the use of computer-numerical controlled (CNC) machines. To machine a component on a CNC machine, part programs which define the cutting tool path are needed. This tool path is usually planned from computer-aided design (CAD) drawings, and converted to a computer-aided manufacturing (CAM) machine input format. However, several production bottlenecks are encountered in this transformation process, leading to escalated production costs and time. This problem can be attributed to two major causes. The first issue is the mode by which the CAD
APA, Harvard, Vancouver, ISO, and other styles
10

Powell, B. Michael. "Surface finish optimization by modification of milling cutter parameters." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ62268.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Finish"

1

DeKorne, Clayton. Finish carpentry. Taunton, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Barnes, Linda. Bitter finish. Dell Pub., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Barnes, Linda. Bitter finish. Dell Pub., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Francome, John. Deadly finish. Windsor, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ngaio, Marsh. Photo-finish. Fontana/Collins, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Francis, Dick. Flying finish. Remploy, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ėpshteĭn, Leopolʹd. Promezhutochnyĭ finish. Feniks, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Barnes, Linda. Bitter finish. Dell Pub., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hirschberg, Cornelius. Florentine finish. J. Curley & Associates, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Francis, Dick. Flying finish. Joseph, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Finish"

1

Weik, Martin H. "finish." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_7181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wolkersdorfer, Christian. "Finish." In Mine Water Treatment – Active and Passive Methods. Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-662-65770-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gooch, Jan W. "Finish." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4959.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bährle-Rapp, Marina. "finish." In Springer Lexikon Kosmetik und Körperpflege. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_4005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Reyes, Anselmo. "Finish." In The Practice of International Commercial Arbitration. Informa Law from Routledge, 2017. http://dx.doi.org/10.4324/9781315474335-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lorch, Stanley. "Tunnel Finish." In Tunnel Engineering Handbook. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0449-4_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gooch, Jan W. "Burned Finish." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1687.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gooch, Jan W. "Cabinet Finish." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1784.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gooch, Jan W. "Casein Finish." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1999.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gooch, Jan W. "Crackle Finish." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3033.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Finish"

1

Vogel, Mark B. "A Polished Concrete Floor - Start to Finish." In Paint and Coatings Expo (PACE) 2009. SSPC, 2009. https://doi.org/10.5006/s2009-00054.

Full text
Abstract:
A polished concrete floor project can be a very rewarding experience, as well as a tough lesson. Experience in the field and following certain guidelines can make a job much more rewarding and cost effective. Cutting corners or a misdiagnosis of the floor itself and/or environment can yield disastrous and costly results. In this article, we will walk you through the basic steps along with a complete overview of polished concrete. We will examine all steps, including environment, concrete diagnosis, grinding, densifying, polishing, color, and of course, maintenance.
APA, Harvard, Vancouver, ISO, and other styles
2

Tritremmel, Max. "Finish Standards for Intumescent Cellulosic Fire Protection." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-18100.

Full text
Abstract:
Abstract There are various resinous materials used in the formulation of intumescent coatings (acrylics, various epoxies, etc). The paper would examine the uses and features of these materials and also compare their starting point for appearance. It would then examine the means and methods and effort required to change (improve) that appearance to align with an expectation. It would do this in the context of comparing to other specified standards (Drywall finishing standards, AISC AESS Standards) and propose the development of an industry standard methodology for specifying finishes.
APA, Harvard, Vancouver, ISO, and other styles
3

O’Donoghue, Mike, Ron Garrett, V. J. Datta, and Justin Dunn. "Polyaspartic Ester Finish Coats – a New Generation." In Paint and Coatings Expo (PACE) 2008. SSPC, 2008. https://doi.org/10.5006/s2008-00046.

Full text
Abstract:
Abstract Recent advances in the realm of polyaspartic ester finish coat technology have led to significant improvements in their aesthetic and corrosion resistance properties. Of particular interest is an initial comparison of the aesthetic properties of older and new generation polyaspartic ester finishes with both polyurethanes and isocyanate-free polysiloxane finishes. Hailed for their rapid curing and rapid return-to-service features, 2 ct and 3 ct high performance systems with polyaspartic ester topcoats are finding ever more use in industry. The multifaceted property attributes of polyas
APA, Harvard, Vancouver, ISO, and other styles
4

Schwob, Emmanuelle. "Single Pack, High Performance, Low VOC, Finish." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09002.

Full text
Abstract:
Abstract An innovative, single pack, high performance, organically modified Polysiloxane coating has been developed for the Maintenance and Repair Market. It is environmentally compliant with a low VOC of 250g/litre (with exempt solvents). Extensive laboratory test data has been generated and demonstrates that this finish technology can pass severe testing in thermal cycles and exposure in aggressive environments such as C5M, on a wide variety of test panels with welds and edges. Indeed, the subtle balance of the organic / inorganic hybrid offers a range of properties such as adhesion (to new
APA, Harvard, Vancouver, ISO, and other styles
5

Pfeifer, Andrew R., and George Shaw. "Environmentally Friendly Fastener Finishes." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02163.

Full text
Abstract:
Abstract “The Perfect Finish” is something that the industry has been seeking for years. It is an elusive concept for which millions of dollars have been spent in developing, testing and qualifying possible alternative finishes, but most of these efforts are futile. In order for engineers to be most effective, a realization must be made that each finish, from phosphate to cadmium, has strengths and weaknesses that must be weighed in considering each application. It is with these considerations that progress can be made toward using the materials that have the closest resemblance to the qualiti
APA, Harvard, Vancouver, ISO, and other styles
6

Fultz, Benjamin, William D. Corbett, and Kurt Best. "Time Is Money: Improving Shop & Field Painting Throughput by Reducing Finish Coat Handling Time." In SSPC 2011. SSPC, 2011. https://doi.org/10.5006/s2011-00012.

Full text
Abstract:
Handling and transportation of finish coated steel from the fabrication shop to the project site is impacted by the length of time that the finish coat must dry. Known as shop-field throughput, a reduction in the dry time required prior to handling (without compromising performance), as well as a minimization of handling damage can greatly reduce project costs. The authors believe that it may be possible to save at least one or possibly two full days of throughput time by using a two coat system (organic zinc or inorganic zinc silicate primer with a fast dry finish coat) compared to a two-coat
APA, Harvard, Vancouver, ISO, and other styles
7

Harding, Kevin, Esmaeil Heidari, Robert Tait, Guangping Xie, and Zirong Zhai. "Industrial surface finish method comparison for fine finish measurements." In Photonics Asia, edited by Kevin G. Harding, Peisen S. Huang, and Toru Yoshizawa. SPIE, 2012. http://dx.doi.org/10.1117/12.2000179.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Church, Eugene L. "Fractal Surface Finish." In 31st Annual Technical Symposium, edited by C. Stuart Bowyer. SPIE, 1988. http://dx.doi.org/10.1117/12.942165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

DeVault, David, Kenji Sagae, and David Traum. "Can I finish?" In the SIGDIAL 2009 Conference. Association for Computational Linguistics, 2009. http://dx.doi.org/10.3115/1708376.1708378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fedosov, Anton, and Marc Langheinrich. "From Start to Finish." In MobileHCI '15: 17th International Conference on Human-Computer Interaction with Mobile Devices and Services. ACM, 2015. http://dx.doi.org/10.1145/2786567.2793698.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Finish"

1

Vorburger, T. V., and J. Raja. Surface finish metrology tutorial. National Institute of Standards and Technology, 1990. http://dx.doi.org/10.6028/nist.ir.89-4088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Augsburg, Britta, and Paul Rodríguez-Lesmes. FINISH Impact Evaluation Report. The IFS, 2017. http://dx.doi.org/10.1920/re.ifs.2024.0540.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Augsburg, Britta. FINISH - Assessing its impact: Is FINISH income generating? Does it empower women? Create awareness and enhance knowledge? The IFS, 2010. http://dx.doi.org/10.1920/re.ifs.2024.0749.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Takacs, P. Z., and E. L. Church. Integrating figure and finish measurements with surface profiling instruments. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10137803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lammers, Peter J., and Mark S. Honeyman. Farrow-to-Finish in a Hoop Barn: a Demonstration. Iowa State University, 2005. http://dx.doi.org/10.31274/ans_air-180814-1083.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lammers, Peter J., and Mark S. Honeyman. Farrow-to-Finish in a Hoop Barn: A Demonstration. Iowa State University, Digital Repository, 2005. http://dx.doi.org/10.31274/farmprogressreports-180814-2258.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Augsburg, Britta. FINISH evaluation study: a comparative summary of baseline reports. The IFS, 2011. http://dx.doi.org/10.1920/re.ifs.2024.0699.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Machado, Isadora Fernanda. Assessment of changes in antibiotic use in grow-finish pigs after the introduction of PRRSV in a naïve farrow-to-finish system. Iowa State University, 2023. http://dx.doi.org/10.31274/cc-20240624-252.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rodriguez, Noel. Marginal Fit of CEREC Crowns at Different Finish Line Curvatures. Defense Technical Information Center, 2015. http://dx.doi.org/10.21236/ad1012742.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Prof. John J. Lannutti and Prof. Carroll E. Mobley. Improvements in Sand Mold/Core Technology: Effects on Casting Finish. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/841468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Finish' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography