Relevant bibliographies by topics / Five-coordinate machine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Five-coordinate machine'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Five-coordinate machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Five-coordinate machine"

1

RAHMAN, Mizanur, and J. R. R. MAYER. "0216 Testing a Five Axis Machine Tool for Coordinate Metrology." Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015.8 (2015): _0216–1_—_0216–6_. http://dx.doi.org/10.1299/jsmelem.2015.8._0216-1_.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhong, Wenbin, Wenhan Zeng, Guoyu Yu, and Xiangqian Jiang. "Development of an on-machine surface measurement system for an ultra-precision five-axis machine." MATEC Web of Conferences 401 (2024): 13007. http://dx.doi.org/10.1051/matecconf/202440113007.

Full text
Abstract:
Ever-increasing demand for complex freeform surfaces machined by ultra-precision five-axis machines necessitates efficient on-machine surface measurement (OMSM) systems. While OMSM offers significant advantages in metrology efficiency and machining accuracy, integrating it with these machines presents a challenge due to complex data synchronization and processing. This paper addresses this challenge by proposing a dedicated controller for synchronized acquisition of sensor measurement data and machine coordinate data. Additionally, a straightforward sensor alignment method is presented. The ef
APA, Harvard, Vancouver, ISO, and other styles
3

Ying, Jianhong, Guangtao Zhou, Jihua Jiang, Xiaojun Zhu, and Min Hu. "Localization Transformation of Five Coordinate Milling Machine." Procedia CIRP 56 (2016): 561–64. http://dx.doi.org/10.1016/j.procir.2016.10.110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhi, Jing Zhang, Cheng Zu Ren, and Jing Chuan Dong. "Study on Post-Processing of Five-Axis Cnc Machining." Applied Mechanics and Materials 141 (November 2011): 524–28. http://dx.doi.org/10.4028/www.scientific.net/amm.141.524.

Full text
Abstract:
According to the feature of five-axis CNC machine tools’structure, do researches on post-process technique. By means of analysis of the kinetic model of five-axis CNC machine tools, Position and orientation of the tool in the workpiece coordinate system transforms to that of the machine coordinate system. Besides, Because of the rotation，Five-axises maching will produce the non-linear error．This article provides an easy algorithm to find the maximum non-linear error. Finally, an impeller, for example, simulates in the computer and machine by a 5-axis machine tool.
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, You Dong, and Tian Miao Wang. "Cutter Radius Compensation for Five- Axis Peripheral Milling in CNC System." Advanced Materials Research 317-319 (August 2011): 1979–82. http://dx.doi.org/10.4028/www.scientific.net/amr.317-319.1979.

Full text
Abstract:
This paper presents a 3D tool radius compensation for five- axis peripheral milling in CNC systems. Using a generalized kinematics model of five- axis machines and uniform algorithm, it is possible to calculate the complete analytical equations for the tool orientation relative to part. The tool orientation relative to part selecting as Z-axis is used to establish compensation coordinate system. The points in the machine coordinate system are converted to the compensation coordinate system. The compensation points in the compensation coordinate system using these points can be calculated. This
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Haitao, Shugui Liu, and Xinghua Li. "A study on the key techniques of application of REVO five-axis system in non-orthogonal coordinate measuring machine." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 4 (2016): 730–36. http://dx.doi.org/10.1177/0954405416666906.

Full text
Abstract:
REVO five-axis system, designed for the orthogonal coordinate measuring machines, must be reconfigured for the application in the non-orthogonal coordinate measuring machines. First, in this article, error sources of the system and components of measurement data are analyzed; then, scale values of coordinate measuring machine axes, which are essential to derive the coordinates of measured points in non-orthogonal coordinate measuring machine, are separated out. Besides, the mathematical model of REVO is established based on the quasi-rigid body theory, from which the measurement results can be
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Shyh-Leh, Mun-Hooi Khong, and Sheng-Min Hsieh. "Contouring Control of a Five-Axis Machine Tool with Equivalent Errors." Electronics 11, no. 16 (2022): 2521. http://dx.doi.org/10.3390/electronics11162521.

Full text
Abstract:
In this study, the contouring control problem of a five-axis machine tool was examined. Due to the rotation axes, there are two coordinate systems involved in the five-axis machine tool, namely the workpiece coordinate system and machine coordinate system. The five-axis machine tool is required to follow a given desired path with tool orientation specified in the workpiece coordinate system. However, the system dynamics of the machine tool is described in the machine coordinates. Kinematic transformations exist between the two coordinate systems. One challenge of the problem is to design a con
APA, Harvard, Vancouver, ISO, and other styles
8

Fei, Zhi Gen, Jun Jie Guo, and Guo Fu Luo. "The Design of Compact Five-Coordinate Measuring Machine." Applied Mechanics and Materials 42 (November 2010): 26–29. http://dx.doi.org/10.4028/www.scientific.net/amm.42.26.

Full text
Abstract:
In this paper, a novel type compact five-coordinate measuring machine with laser probe, which contains three translational axes and two rotational axes, was designed and built. The overall mechanical structure and several key components are introduced in detail. The structure form of column and cantilever beam is adopted, which enhances the measuring flexibility and make the probe feasible to detect the objects from various directions. With the help of results of finite element analysis on the beam, the method of pre-deformation assembly is employed to guarantee the location accuracy of the pr
APA, Harvard, Vancouver, ISO, and other styles
9

Vainshtein, I. V., N. A. Serkov, R. O. Sirotkin, and A. A. Merzlyakov. "Rigidity of a five-coordinate parallel kinematic machine." Russian Engineering Research 29, no. 4 (2009): 404–9. http://dx.doi.org/10.3103/s1068798x09040170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chang, Hui-Chin, and Alan C. Lin. "Five-axis automated measurement by coordinate measuring machine." International Journal of Advanced Manufacturing Technology 55, no. 5-8 (2010): 657–73. http://dx.doi.org/10.1007/s00170-010-3092-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Five-coordinate machine"

1

Божко, А. В. "Розробка 5-координатного гравіювально-фрезерного верстата з аналізом його технологічних можливостей". Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/70780.

Full text
Abstract:
Кваліфікаційна робота магістра викладена на 124 сторінках, в тому числі 92 рисунка, бібліографії з 21 джерел на двох сторінках. На сьогодні постала нагальна науково–технічна проблема конструювання, розрахунку, та вдосконалення п’яти-координатного гравіювально-фрезерного верстата. Мета роботи. Конструювання, розрахунок, та модернізація п’яти-координатного гравіювально-фрезерного верстата. Завдання роботи. Сконструювати, виконати розрахунок гравіювально-фрезерного верстата та його допоміжного інструменту і оснащення. Модернізувати верстат сконструйованими пристроями. Проаналізувати технологіч
APA, Harvard, Vancouver, ISO, and other styles
2

Syu, Jhih-Cheng, and 許智程. "Development of the Five DOFs Non-contact Coordinate Measuring Machine System." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/9wkuv8.

Full text
Abstract:
碩士<br>國立臺北科技大學<br>車輛工程系所<br>93<br>This work developed a five degrees of freedom (DOFs) non-contact coordinate measuring machine (CMM) system to measure rapidly and accurately the surface of the workpiece. Selecting a small gap to measure the workpiece surface can obtain a close to actual size of the workpiece in the practical measuring process. However, as the excessively small gap was chose to measure the surface of the workpiece, the much white noise would be caused because of the effects of the stability of the measured laser displacement meter (LDM) and the surface roughness of the workpie
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Five-coordinate machine"

1

González, Guillermo, Brayan Eduwars Medina, Naiara Ortega, Soraya Plaza, and Gaizka Gómez. "5-Axis Machining Center OMM Uncertainty Estimation." In Proceedings of the XV Ibero-American Congress of Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_56.

Full text
Abstract:
AbstractNowadays, on-machine tool measurement (OMM) and coordinate measuring machine measurement (CMM) are the most common inspection methods. Although the ex-situ CMM measurements usually offers higher accuracy and reliability, OMM can inspect the workpiece without removing it from the machine tool. Therefore, it is possible to perform both in-process and post-process measurements, avoiding possible unclamping errors. However, due to the non-constant conditions in which machine tools usually operate, it is difficult to guarantee the traceability of measurements over time. For example, thermal
APA, Harvard, Vancouver, ISO, and other styles
2

Gąska, Adam, Wiktor Harmatys, Piotr Gąska, Maciej Gruza, and Jerzy Sładek. "Validation of Virtual CMM-Based Method for Uncertainty Estimation of Measurements Performed on Five-Axis Coordinate Measuring Machines." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-18177-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Five-coordinate machine"

1

Fei, Zhigen, Junjie Guo, Jindong Wang, and Yong Li. "Miniature five-coordinate compound measuring machine." In 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2009. http://dx.doi.org/10.1109/robio.2009.5420846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Zhuoran, Xiaomei He, and Yizhang Wang. "Different measuring methods of REVO five-axis coordinate measuring machine." In Tenth International Symposium on Precision Mechanical Measurements, edited by Liandong Yu, Lian X. Yang, and Haojie Xia. SPIE, 2021. http://dx.doi.org/10.1117/12.2613428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fang, Xiuzhi, Xugang Feng, and Jianyan Zhang. "Development of a virtual model of five-axis coordinate measuring machine." In International Symposium on Precision Mechanical Measurements 2019, edited by Zheng You. SPIE, 2019. http://dx.doi.org/10.1117/12.2542070.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tsay, Der Min, Huo Chu Chen, and Ming Jane Her. "A Study on Five-Axis Flank Machining of Centrifugal Compressor Impellers." In ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0342.

Full text
Abstract:
Referring to machining technologies used for turbomachinery components, generally there are two cutting strategies: point cutting and flank cutting. Based on considerations of the cost, efficiency, and surface roughness, flank cutting by using a five-axis machining tool is a promising way to machine blade surfaces of turbomachinery components constructed by ruled surfaces. In this article, a flank cutting technology for centrifugal compressor impellers is developed by using the B-spline curve interpolation, ruled surface construction, and coordinate transformations. Also, an impeller with twel
APA, Harvard, Vancouver, ISO, and other styles
5

Kawai, Ryota, and Ryuta Sato. "Geometric Error Identification Method for Swiss-Type Automatic Lathe by Using Reference Sphere and Displacement Sensor." In 2024 International Symposium on Flexible Automation. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/isfa2024-140117.

Full text
Abstract:
Abstract Accuracy of machined parts are deteriorated due to geometric errors between axes in five-axis machine tools. Therefore, many research works have been carried out to identify and compensate the geometric errors. Swiss-type automatic lathes are widely applied to machine small parts with complex shapes. Although many geometric errors exist in Swiss-type automatic lathes, conventional measurement methods cannot evaluate geometric accuracy due to small working space of the automatic lathes. In addition, the influence of geometric errors onto machining accuracy has not been clarified. In th
APA, Harvard, Vancouver, ISO, and other styles
6

Shih, Yi-Pei, Bor-Tyng Sheen, Wun-Kai Wu, and Bo-Lin Wei. "Non-Contact Measurement of Spiral Bevel Gears Using the Laser Profiler on the Five-Axis Machine." In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/detc2023-112006.

Full text
Abstract:
Abstract Nowadays, the measuring machines for gears, such as the P series of Klingelnberg and the GMS series of Gleason, are all four-axis structures. They have a three-dimensional contact scanning probe system and high measurement accuracy. This measurement has two main disadvantages: (1) it is time-consuming, and (2) difficult to measure small-size gears with less than a 0.5 mm module. Due to the above drawbacks, non-contact measurement has become more popular recently. This research aims to develop a non-contact measurement system of spiral bevel gears using a laser profiler. We establish t
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Zongze, Ryuta Sato, Keiichi Shirase, and Yukitoshi Ihara. "Sensitivity Analysis Between Error Motions and Machined Shape Errors in Five-Axis Machining Centers: In Case of S-Shaped Machining Test by a Square End Mill." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2804.

Full text
Abstract:
Abstract Five-axis machining center, combined three linear and two rotary axes, has been increasingly used in complex surface machining. However, as the two additional axes, the machined surface under table coordinate system is usually different from the tool motion under machine coordinate system, and as a result, it is very tough to predict the machined shape errors caused by each axes error motions. This research presents a new kind of sensitivity analysis method, to find the relationship between error motions of each axis and geometric errors of machined shape directly. In this research, t
APA, Harvard, Vancouver, ISO, and other styles
8

Li, J., Yangpeng Song, and Ye Liu. "Development of Post-Processing System for Three Types of Five-Axis Machine Tools Based on Solid Model." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2665.

Full text
Abstract:
Although machine control data can be obtained by means of converting cutter location (CL) data comprised of the tool tip coordinate and the tool axis orientation vector in the workpiece coordinate frame with postprocessor, it’s uncertain whether they can be used for 5-axis machining. Owing to the fact that most postprocessors focus on the method to derive solutions for the equations of NC data by the form-shaping function matrix and the inverse kinematics model without taking the manufacturing scene into consideration, this study has presented a new post-processing system to generate and optim
APA, Harvard, Vancouver, ISO, and other styles
9

Fu, Guoqiang, Hongli Gao, and Tengda Gu. "A Universal Postprocessor of General Table-Tilting Type of Five-Axis Machine Tools Without Rotational Tool Center Point Function for Actual NC Code Generation." In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6525.

Full text
Abstract:
The postprocessor is essential for machining with five-axis machine tools. This paper develops one universal postprocessor for table-tilting type of five-axis machine tools without rotational tool center point (RTCP) function. Firstly, positions of two rotary axes and the workpiece in the machine coordinate system (MCS) are introduced into the kinematic chain of the five-axis machine tools. The uniform product of exponential (POE) formula of the tool relative to the workpiece is established to obtain the universal forward kinematics. On this basis, the postprocessor of table-tilting type of fi
APA, Harvard, Vancouver, ISO, and other styles
10

Moon, Sang-Ku, Yong-Mo Moon, Sridhar Kota, and Robert G. Landers. "Screw Theory Based Metrology for Design and Error Compensation of Machine Tools." In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/dac-21083.

Full text
Abstract:
Abstract The paper presents a generalized mathematical framework for computation and compensation of tool tip errors in multi-axis machine tools using screw theory. In contrast to conventional Denavit–Hartenberg notation, Screw theory offers several advantages including: (i) modeling of complex machine tool configurations with rotational axes, (ii) tractability of error propagation which simplifies solution of inverse kinematics and subsequent error-compensation procedures, and (iii) functional representation of error screws in a global reference frame rather than cumbersome coordinate transfo
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Five-coordinate machine' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography