Log in

Relevant bibliographies by topics / Flexible fibers

Contents

Journal articles

Academic literature on the topic 'Flexible fibers'

Author: Grafiati

Published: 13 April 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Flexible fibers.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Flexible fibers"

1

Parasakthibala, Ms G., and Mrs A. S. Monisha. "A Review on Natural Fibers; Its Properties and Application Over Synthetic Fibers." International Journal for Research in Applied Science and Engineering Technology 10, no. 8 (2022): 1894–97. http://dx.doi.org/10.22214/ijraset.2022.46530.

Full text

Abstract:

Abstract: Fibre is a long, thin strand or thread of material made by weaving or knitting threads together. Fibre is a hair like strand of material. A fibre is the smallest visible unit of any textile product. Fibres are flexible and may be spun into yarn and made into fabric. Natural fibres are taken from animals, vegetables or mineral sources. A few examples of widely used natural fibres include animal fibre such as wool and silk vegetables fibres, especially cotton and flax and asbestos, a mineral. Natural fibers are more important part in our human environment. Natural fibers are ecofriendl

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Shengjun, Jiaqi Guo, Yibo Ma, Alan X. Wang, Xianming Kong, and Qian Yu. "Fabrication and Application of SERS-Active Cellulose Fibers Regenerated from Waste Resource." Polymers 13, no. 13 (2021): 2142. http://dx.doi.org/10.3390/polym13132142.

Full text

Abstract:

The flexible SERS substrate were prepared base on regenerated cellulose fibers, in which the Au nanoparticles were controllably assembled on fiber through electrostatic interaction. The cellulose fiber was regenerated from waste paper through the dry-jet wet spinning method, an eco-friendly and convenient approach by using ionic liquid. The Au NPs could be controllably distributed on the surface of fiber by adjusting the conditions during the process of assembling. Finite-difference time-domain theoretical simulations verified the intense local electromagnetic fields of plasmonic composites. T

APA, Harvard, Vancouver, ISO, and other styles

3

Yan, Yurong, Weipei Li, Ruitian Zhu, Chao Lin, and Rudolf Hufenus. "Flexible Phase Change Material Fiber: A Simple Route to Thermal Energy Control Textiles." Materials 14, no. 2 (2021): 401. http://dx.doi.org/10.3390/ma14020401.

Full text

Abstract:

A flexible hollow polypropylene (PP) fiber was filled with the phase change material (PCM) polyethylene glycol 1000 (PEG1000), using a micro-fluidic filling technology. The fiber’s latent heat storage and release, thermal reversibility, mechanical properties, and phase change behavior as a function of fiber drawing, were characterized. Differential scanning calorimetry (DSC) results showed that both enthalpies of melting and solidification of the PCM encased within the PP fiber were scarcely influenced by the constraint, compared to unconfined PEG1000. The maximum filling ratio of PEG1000 with

APA, Harvard, Vancouver, ISO, and other styles

4

Jia, Xian-Sheng, Cheng-Chun Tang, Xu Yan, et al. "Flexible Polyaniline/Poly(methyl methacrylate) Composite FibersviaElectrospinning and In Situ Polymerization for Ammonia Gas Sensing and Strain Sensing." Journal of Nanomaterials 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/9102828.

Full text

Abstract:

Conducting polyaniline (PANI) was in situ polymerized at the surface of electrospun poly(methyl methacrylate) (PMMA) fibers to obtain flexible composite fibers. The electrical conductivity of an individual PANI/PMMA composite fiber was estimated to be 2.0 × 10−1 S cm−1at room temperature. The ammonia sensing properties of the samples were tested by impedance analysis. The PANI/PMMA fibers could obviously respond to low concentration of ammonia at ppb level and could respond to relatively high concentration of ammonia at 10 ppm level quickly. In addition, the sensitivity exhibited a good linear

APA, Harvard, Vancouver, ISO, and other styles

5

Babachov, V. G., E. V. Stepanova, A. M. Zimichev, and O. V. Basargin. "OXIDE CONTINUOUS FIBERS AS A PART OF FLEXIBLE HIGH TEMPERATURE INSULATION." Aviation Materials and Technologies, no. 1 (2021): 34–43. http://dx.doi.org/10.18577/2713-0193-2021-0-1-34-43.

Full text

Abstract:

This work is devoted to the production of flexible continuous ceramic fibers based on refractory aluminum and silicon oxides using the Sol-gel method. The processes of transition of water-soluble components of the precursor solution to the oxide form during primary firing of gelified fibers are studied. Structural and phase transformations in fibers under high-temperature heating are examined. The sequence of phase transitions from the amorphous state to the crystal stable phase of α-Al2O3 is shown. The dependence of the mechanical properties of oxide fiber samples on the firing temperature is

APA, Harvard, Vancouver, ISO, and other styles

6

Podsiadły, Bartłomiej, Piotr Walter, Michał Kamiński, Andrzej Skalski, and Marcin Słoma. "Electrically Conductive Nanocomposite Fibers for Flexible and Structural Electronics." Applied Sciences 12, no. 3 (2022): 941. http://dx.doi.org/10.3390/app12030941.

Full text

Abstract:

The following paper presents a simple, low-cost, and repeatable manufacturing process for fabricating conductive, elastic carbon-elastomer nanocomposite fibers for applications in the textile industry and beyond. The presented method allows for the manufacturing of fibers with a diameter of 0.2 mm, containing up to 50 vol. % of graphite powder, 10 vol. % of CNT, and a mix of both fillers. As a result, resistivity below 0.2 Ωm for the 0.2 mm-diameter fibers was achieved. Additionally, conductive fibers are highly elastic, which makes them suitable for use in the textile industry as an element o

APA, Harvard, Vancouver, ISO, and other styles

7

Ruiz-Bustos, Rocío, Antonio López-Uceda, María López-Martínez, and Joost Van Duijn. "The Mechanical Performance of Recycled Slate Waste Fiber Composites Based on Unsaturated Polyester Resins." Materials 16, no. 17 (2023): 6041. http://dx.doi.org/10.3390/ma16176041.

Full text

Abstract:

In the last few decades, there has been increasing social awareness for environmental conservation, which is driving the development of composite materials based on natural fibers. These new materials have interesting properties that allow for their use in a variety of applications. This study deals with the development of composite materials based on unsaturated polyester resins reinforced with recycled mineral fibers, such as slate fibers obtained from slate production waste, which have similar properties to glass fiber. The mechanical properties of these composites have been determined by t

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Yi, Jun Chen, Xiao Han, Yinghui Li, Ziqiang Zhang, and Yanwen Ma. "Capillarity-Driven Self-Assembly of Silver Nanowires-Coated Fibers for Flexible and Stretchable Conductor." Nano 13, no. 12 (2018): 1850146. http://dx.doi.org/10.1142/s1793292018501461.

Full text

Abstract:

The rapid development of smart textiles requires the large-scale fabrication of conductive fibers. In this study, we develop a simple, scalable and low-cost capillary-driven self-assembly method to prepare conductive fibers with uniform morphology, high conductivity and good mechanical strength. Fiber-shaped flexible and stretchable conductors are obtained by coating highly conductive and flexible silver nanowires (Ag NWs) on the surfaces of yarn and PDMS fibers through evaporation-induced flow and capillary-driven self-assembly, which is proven by the in situ optical microscopic observation.

APA, Harvard, Vancouver, ISO, and other styles

9

Shen, Yanan, Chunyang Wang, Xiao Yang, et al. "New Progress on Fiber-Based Thermoelectric Materials: Performance, Device Structures and Applications." Materials 14, no. 21 (2021): 6306. http://dx.doi.org/10.3390/ma14216306.

Full text

Abstract:

With the rapid development of wearable electronics, looking for flexible and wearable generators as their self-power systems has proved an extensive task. Fiber-based thermoelectric generators (FTEGs) are promising candidates for these self-powered systems that collect energy from the surrounding environment or human body to sustain wearable electronics. In this work, we overview performances and device structures of state-of-the-art fiber-based thermoelectric materials, including inorganic fibers (e.g., carbon fibers, oxide fibers, and semiconductor fibers), organic fibers, and hybrid fibers.

APA, Harvard, Vancouver, ISO, and other styles

10

Yang, Qiuyan, Zhen Xu, Bo Fang, et al. "MXene/graphene hybrid fibers for high performance flexible supercapacitors." J. Mater. Chem. A 5, no. 42 (2017): 22113–19. http://dx.doi.org/10.1039/c7ta07999k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!