Log in

Relevant bibliographies by topics / Flexible sensor array / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Flexible sensor array.

Dissertations / Theses on the topic 'Flexible sensor array'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 31 dissertations / theses for your research on the topic 'Flexible sensor array.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Yaul, Frank M. "A flexible underwater pressure sensor array for artificial lateral line applications." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/76831.

Full text

Abstract:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student submitted PDF version of thesis.<br>Includes bibliographical references (p. 81-83).<br>This thesis develops a flexible elastomer-based underwater pressure sensor array. When mounted onto the hull of an aquatic vehicle, the array enables obstacle detection, identification and tracking, and can help the vehi

APA, Harvard, Vancouver, ISO, and other styles

2

Lee, Shira M. (Shira Miriam). "Finite element simulation and parameter optimization of a flexible tactile pressure sensor array." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/32948.

Full text

Abstract:

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.<br>Includes bibliographical references.<br>A finite element model was developed to optimize design of a flexible tactile sensor. The sensor consists of layers of thin-film copper and PDMS, and the model can be used to determine the effects on sensor sensitivity and durability of variations in material properties and geometry. The model was used to study the effect of variations in copper thickness. Four copper thicknesses, 0.3[mu]m, 0.5[mu]m, 3[mu]m, and 9[mu]m, were analyzed under a range of pressure

APA, Harvard, Vancouver, ISO, and other styles

3

Wu, Zhizhen. "Flexible Microsensors based on polysilicon thin film for Monitoring Traumatic Brain Injury (TBI)." University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1512045589967871.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Panda, Binit. "FLEXIBLE, SKIN COUPLED MICROPHONE ARRAY FOR POINT OF CARE VASCULAR ACCESS MONITORING." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1560348601743654.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kervran, Yannick. "Cartographie d'un champ de pression induit par l'occlusion dentaire." Thesis, Rennes 1, 2016. http://www.theses.fr/2016REN1S077.

Full text

Abstract:

Le diagnostic de l'occlusion dentaire reste actuellement un défi majeur pour les chirurgiens-dentistes. Des outils dédiés existent, comme le papier à articuler et le T-Scan®, mais sont limités pour diverses raisons. L'objectif de cette thèse est alors de développer un nouvel outil sous forme de matrice de capteurs de pression sur substrat flexible alliant les avantages des outils nommés précédemment, à savoir un produit électronique, informatisé et de faible épaisseur pour ne pas être intrusif. Nous avons choisi une technologie piézorésistive et l'utilisation de jauges de contrainte en siliciu

APA, Harvard, Vancouver, ISO, and other styles

6

Lo, Wen-Bin, and 羅文濱. "Flexible piezoelectric tactile sensor with structural electrodes array." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/31139458310626099986.

Full text

Abstract:

碩士<br>南台科技大學<br>機械工程系<br>95<br>The tactile sensor has flexible characteristic that it can be applied in the application with the human body physiological monitoring for example，pulse, heartbeat, blood pressure. However the piezoelectric-type tactile sensor sensitivity needs to be improved. Therefore we introduce the concept of structural electrode for enhancement of the sensitivity of piezoelectric tactile sensor and fabricated structure by MEMS process. A sandwich structure for flexible tactile sensor consists of top and bottom soft substrates made of Polystyrene, and in between of two soft s

APA, Harvard, Vancouver, ISO, and other styles

7

Tsao, Li-Chi, and 操禮齊. "Flexible Sensor Array Using Composite Polymeras Artificial Skin." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/38664891942765297398.

Full text

Abstract:

碩士<br>臺灣大學<br>機械工程學研究所<br>95<br>This work presents a novel method to fabricate temperature sensor arrays by dispensing electro-resistive polymer on flexible polyimide films. The fabricated temperature sensor array has 64 sensing cells in a 4×4 cm2 area. The sensor array can be used as humanoid artificial skin for sensation system of robots. The flexible polyimide substrate was patterned by interdigitated copper electrodes for determining the resistivity change of the electro-resistive polymer, which increases with ambient temperature. Polydimethlysiloxane(PDMS) was used as the matrix of th

APA, Harvard, Vancouver, ISO, and other styles

8

Tsao, Li-Chi. "Flexible Sensor Array Using Composite Polymer as Artificial Skin." 2007. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0001-2507200717585200.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

王森巨. "Development A Massflow Measurement System Based on Flexible Electrical Sensor Array." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/17425256656855026482.

Full text

Abstract:

碩士<br>逢甲大學<br>自動控制工程學系<br>103<br>The research develops PDMS flexible substrate based electrical sensor array manufactured by the photolithography and life-off process of the micro-electro-mechanical system technology for measuring massflow. The main sensing structures are flat inductors that can concentrate electric field centralized to promotion sensitivity. The massflow mixed high magnetic permeabilitiy powders flow through the sensor that can vary sensing inductance and response time. The sensing system comprises flexible materials, MEMS structures, sensing circuits and a human-machine inte

APA, Harvard, Vancouver, ISO, and other styles

10

Wei, Hua-Ling, and 魏華伶. "Printed Resistive Sensor Array Combined with Flexible Substrate for Gas Detection." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/wem664.

Full text

Abstract:

碩士<br>國立清華大學<br>奈米工程與微系統研究所<br>105<br>In this research, we combine the printed electrodes and flexible substrate to develop a low-cost resistive gas sensor with low energy-consumption. After coating a thin layer of polymer and carbon black mixture, the ability of measuring gas can be derived by analyzing the resistance change due to the adsorption of the gas molecules by the polymer. The sensor array containing seven sensors can be coated with different polymer so that every polymer will response to gas differently. The goal of identifying or classifying gases can be reached by analyzing the r

APA, Harvard, Vancouver, ISO, and other styles

11

Hsiao, Meng-Yueh, and 蕭孟岳. "A Monolithic Neural Sensor Integrated with Flexible Surface and Depth Electrode Array." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/n92529.

Full text

Abstract:

碩士<br>國立交通大學<br>電機工程學系<br>103<br>This work presents a monolithic neural sensor integrated with an electrocorticographic (ECoG) electrode and micro-probe array. The polyimide (PI)-based ECoG electrode and micro-probe array were fabricated using a customized Micro Electro Mechanical Systems PI process. Proposed sensor can record 4-channel ECoG signals and 14-channel local-field potential signals simultaneously. The selected materials of the fabricated sensor are biocompatible and flexible in order to minimize the damage in long-term implantation. The structure strength has been proof in agar and

APA, Harvard, Vancouver, ISO, and other styles

12

Chern, Yann-Cherng, and 陳彥呈. "Development of flexible pressure sensor array with air-stable organic vertical diode." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/72580272142976397366.

Full text

Abstract:

碩士<br>國立清華大學<br>光電工程研究所<br>98<br>Large area of flexible pressure sensor array can be used in robot, human body or non-flat surface, also used in automotive electronics and medical fields. These macro-electronics is composed of many layers including flexible substrates, sensor array and the driving transistor array. This dissertation aims to develop a flexible pressure sensor array by integrating an organic vertical diode named polymer space-charge-limited diode with a pressure sensitive sensor. Solution process of the organic vertical diode, through material selection and process optimizat

APA, Harvard, Vancouver, ISO, and other styles

13

Chen, Chang Hung, and 陳昶宏. "3D-Via Polymer Deposition Process for Flexible Temperature Sensor Array and Heterogeneous Integration." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/28321918576405173906.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Juang, Bo Jing, and 莊博景. "Flexible Solar Cells Embedded with Thin Film Micro Sensor Array as Sensitive Skin." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/56417502260762645439.

Full text

Abstract:

碩士<br>國立中正大學<br>機電光工程研究所<br>91<br>Electric sensitive skin is a kind of artificial skin which has a large-area, flexible array of sensors with data processing capabilities, which can be used to cover the entire surface of a machine or .an artificial limb (even a part of human body). Because of the problems of materials, fabrication processes, signal and data processing, etc., the technology of sensitive skin is at a standstill. In recent year, the technology of element manufacturing, material science, and the technology of DSP are developed vigorously. The research of sensitive skin causes a po

APA, Harvard, Vancouver, ISO, and other styles

15

Chen-Tai, Lu, and 呂政泰. "Slippage and Direction Sensing Based on Flexible Tactile Sensor with Structural Electrodes Array." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/63558918127929174410.

Full text

Abstract:

碩士<br>南台科技大學<br>機械工程系<br>96<br>A novel flexible tactile sensor for sensing the incident slippage and its direction were designed by introducing the concept of structural electrodes on a piezoelectric film (PVDF). The structural electrodes consisted of silicone rubber column and distributed microelectrodes between the silicone rubber column and PVDF film. As an object placed upon the silicone rubber column and pushed by an external force, the movement and slippage of object can be detected by the output voltages from the distributed electrodes due to the corresponding stress state under the rub

APA, Harvard, Vancouver, ISO, and other styles

16

Peng, Jen-Yu, and 彭任佑. "Design and Implementation of a Flexible Pulse Sensor Array and CMOS Readout Circuit." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/74997338537424452349.

Full text

Abstract:

碩士<br>國立清華大學<br>電子工程研究所<br>101<br>This paper reports the development of a capacitive pulse sensor array using flexible printed circuit board and its CMOS readout circuit. The circuit design allows fast sampling to achieve simultaneous recording of pulse pressure. The readout circuit chip is fabricated by using the TSMC 0.35-um 2P4M CMOS process. The 5×5 capacitive sensor array is placed within an area of 10 mm × 7.5 mm and fabricated by assembling two flexible printed circuit boards. Each board has two copper layers on top and bottom. The two chips are electrically connected by wire bond. Ca

APA, Harvard, Vancouver, ISO, and other styles

17

Huang, Ching-Yu, and 黃靖祐. "Develop & Implement a SOI-based Novel Tactile Sensor Array with Stretchable & Flexible Structure." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/5kz3bf.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>105<br>This study presents a three by three flexible tactile sensor array using stretchable silicon spring with doping silicon. Each tactile sensor device is located at the silicon-unit of a 2D chip-network distributed, which are mechanically and electrically connected to surrounding devices by stretchable silicon spring. The doping silicon acts as a piezo-resistive sensing element embedded into the membrane located at the center of unit, which can detect normal force without heat interference by Wheatstone bridge. The springs can stretch and expand the tactile sens

APA, Harvard, Vancouver, ISO, and other styles

18

Chen, Chih-Wei, and 陳志緯. "Detection of the Coefficient of Friction and Slippage Based on Flexible Tactile Sensor with Structural Electrodes Array." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/49556134298343783699.

Full text

Abstract:

碩士<br>南台科技大學<br>機械工程系<br>97<br>A novel flexible tactile sensor for sensing the incident slippage and its direction were designed by introducing the concept of structural electrodes on a piezoelectric film (PVDF). The structural electrodes consisted of an elastomeric column on the top of PVDF film with the distributed microelectrodes underneath the elastomeric column. As an object was placed upon the elastomeric column and pushed by an external force, the occurrence of slippage can be detected by the output voltages from the distributed microelectrodes due to the corresponding bending stresses

APA, Harvard, Vancouver, ISO, and other styles

19

Ferri, Pascual Josué. "Tactile and Touchless Sensors Printed on Flexible Textile Substrates for Gesture Recognition." Doctoral thesis, 2020. http://hdl.handle.net/10251/153075.

Full text

Abstract:

[EN] The main objective of this thesis is the development of new sensors and actuators using Printed Electronics technology. For this, conductive, semiconductor and dielectric polymeric materials are used on flexible and/or elastic substrates. By means of suitable designs and application processes, it is possible to manufacture sensors capable of interacting with the environment. In this way, specific sensing functionalities can be incorporated into the substrates, such as textile fabrics. Additionally, it is necessary to include electronic systems capable of processing the data obtained, as w

APA, Harvard, Vancouver, ISO, and other styles

20

Pan, Jia-Chyi, and 潘嘉琪. "Design and Fabrication of an Inkjet Printed Flexible Tungsten Oxide-Based pH Sensor Array for 2D pH Monitoring of Chronic Wound." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/52066641576789051963.

Full text

Abstract:

碩士<br>國立交通大學<br>生醫工程研究所<br>104<br>In this work, nanoparticle silver ink is printed on kapton, patterned by SU-8, as wire and reference electrode after chlorination. Pre-treated by Tollen’s reagent can not only reduce electrical resistivity of the printed Ag interconnects but also strengthen printed microstructures for sensor fabrication because of mirror reaction. Then, tungsten oxide is printed and sinter in 120oC as working electrode of a pH sensor. After fabrication, we connect the sensor to Jiehan 5600 Electrochemical Workstation to obtain the open circuit potential and the sensitivity of

APA, Harvard, Vancouver, ISO, and other styles

21

Chen, Alan, and 陳哲智. "Fabrication of Piezoelectric Polymer Thin Films Based on Non-Electrical Polarization Process and Its Applications to Flexible Nanostructured Tactile Sensor Array." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/80600264933059361927.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

"Radiation Detection and Imaging: Neutrons and Electric Fields." Master's thesis, 2015. http://hdl.handle.net/2286/R.I.34869.

Full text

Abstract:

abstract: The work presented in this manuscript has the overarching theme of radiation. The two forms of radiation of interest are neutrons, i.e. nuclear, and electric fields. The ability to detect such forms of radiation have significant security implications that could also be extended to very practical industrial applications. The goal is therefore to detect, and even image, such radiation sources. The method to do so revolved around the concept of building large-area sensor arrays. By covering a large area, we can increase the probability of detection and gather more data to build a mo

APA, Harvard, Vancouver, ISO, and other styles

23

Joshi, Sudeep. "Towards Flexible Sensors and Actuators : Application Aspect of Piezoelectronic Thin Film." Thesis, 2013. http://etd.iisc.ac.in/handle/2005/3431.

Full text

Abstract:

Man’s desire to replicate/mimic the nature’s creation provided an impetus and inspiration to the rapid advancements and progress made in the sensors and actuators technology. A normal human being has five basic sensory organs, which helps and guides him in performing the routine tasks. This underlines the importance of basic sensory organs in a human life. In a similar fashion, sensors and actuators are of paramount importance for most of the science and engineering applications. The aim of the present thesis work is to explore the application of piezoelectric ZnO thin films deposited on a f

APA, Harvard, Vancouver, ISO, and other styles

24

Joshi, Sudeep. "Towards Flexible Sensors and Actuators : Application Aspect of Piezoelectronic Thin Film." Thesis, 2013. http://etd.iisc.ernet.in/2005/3431.

Full text

Abstract:

Man’s desire to replicate/mimic the nature’s creation provided an impetus and inspiration to the rapid advancements and progress made in the sensors and actuators technology. A normal human being has five basic sensory organs, which helps and guides him in performing the routine tasks. This underlines the importance of basic sensory organs in a human life. In a similar fashion, sensors and actuators are of paramount importance for most of the science and engineering applications. The aim of the present thesis work is to explore the application of piezoelectric ZnO thin films deposited on a f

APA, Harvard, Vancouver, ISO, and other styles

25

Wu, Chih-Hao, and 吳智豪. "A Flexible Skin with Temperature Sensor Arrays." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/45290227775456354062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Tsou, Kun-Lin, and 鄒坤霖. "Ink-jet Printing of Flexible Micro Sodium Sensor Arrays." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/pzkjm6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Hsieh, Hsiu-Li, and 謝秀利. "Fabrication and Characterization of the Flexible Linear-Array pH Sensors." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/25296207599803554803.

Full text

Abstract:

碩士<br>國立暨南國際大學<br>電機工程學系<br>97<br>This study aimed to develop a flexible and portable potentiometric pH sensor arrays composed of silver reference electrode and tin oxide (SnO2) working electrode. The fabrication procedures were screen-printing the silver reference electrode and carbon working electrode on top of a PET substrate. Then, SnO2 was sputtered on top of the carbon working electrode to form the SnO2 working electrode. 　　This potentiometric pH sensor arrays was tested using standard pH buffer solution (pH2~pH12). It was found that the sensitivity of this sensor arrays was 50~55mV/pH.

APA, Harvard, Vancouver, ISO, and other styles

28

Hu, Chih-Fan, and 胡志帆. "The Study of a Novel Flexible Pressure / Tactile Sensors Array." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/99213857378419250613.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>95<br>In the past gait analysis, the distribution of the sole pressure cannot be got by the appliance put on patients; the sole pressure or the reaction force, even the physical movement can only be got by an outside sensor, for instance, the pressure board. This research will provide a brand-new concept, that is, the flexible pressure sensors array which is wearable and can be considered as an intelligence device. The concept is for breaking the limitation that, the dispersed rigid silicon-based micro pressure sensor has been hard to apply for some wearing device a

APA, Harvard, Vancouver, ISO, and other styles

29

Lin, Yi Cheng, and 林羿呈. "A Flexible Multifunctional Tactile Sensor Using Interlocked ZnO Nanorod Arrays." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/ery6g5.

Full text

Abstract:

碩士<br>國立清華大學<br>動力機械工程學系<br>105<br>In this study, the flexible PDMS substrates are coated with zinc oxide and zinc oxide doped with aluminum films respectively as seed layers. And the aqueous solution method is used to synthesize one-dimensional zinc oxide nanorods. Then, the PDMS substrates with zinc oxide nanorods are combined to make a multifunctional piezoresistive tactile sensors for artificial electronic skins. The growth solution with aqueous solution method are mixed by dissolving the zinc nitrated and hexamethylenetetramine in the deionized water in a 1:1 ratio. The reaction temperatu

APA, Harvard, Vancouver, ISO, and other styles

30

Dias, Daniel Agostinho Leite Ribeiro. "Array de sensores de pressão flexíveis para monitorização de equilíbrio." Master's thesis, 2013. http://hdl.handle.net/1822/41925.

Full text

Abstract:

Dissertação de mestrado integrado em Eletrónica Industrial e de Computadores<br>Esta dissertação apresenta o desenvolvimento, desenho e fabrico de um array de sensores de pressão flexíveis, para monitorização de equilíbrio em atividades de reabilitação física. A solução proposta utiliza um processo de fabrico simples e de custo reduzido, que combina uma placa de circuito impresso flexível, para definir as ligações elétricas e as dimensões dos condensadores, juntamente com dois substratos flexíveis de Termoplástico Poliuretano (TPU) com os elétrodos impressos com tinta condutora, permitin

APA, Harvard, Vancouver, ISO, and other styles

31

Saurabh, Kumar. "Force and Shape Estimation using Fiber Bragg Grating Sensors for Assistance in Minimally Invasive Diagnostic and Surgical Procedures." Thesis, 2017. https://etd.iisc.ac.in/handle/2005/4652.

Full text

Abstract:

Fiber Bragg Grating (FBG) sensors have become increasingly popular for applications in biomedical engineering. Amongst these, use of FBGs in ‘smart instruments’ for minimally invasive diagnostic and surgical procedures look promising as FBG sensors provide significant advantages compared to other sensing modalities in terms of size, electromagnetic immunity, and ability to withstand sterilization procedures. Minimally invasive procedures provide lower discomfort to the patients and faster healing time. Procedures based on use of needles as well as flexible medical instruments like endoscop

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!