To see the other types of publications on this topic, follow the link: Float sensor.
Dissertations / Theses on the topic 'Float sensor'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Float sensor.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Бойчук, Дмитро Романович, and Dmytro Boychuk. "Розробка автоматизованого лабораторного стенду для перевіряння метрологічних характеристик давачів рівня води." Bachelor's thesis, Тернопільський національний технічний університет ім. І. Пулюя, Факультет прикладних інформаційних технологій та електроінженерії, Кафедра автоматизації технологічних процесів і виробництв, 2021. http://elartu.tntu.edu.ua/handle/lib/35485.
Full textAbstract:
Робота виконана на кафедрі автоматизації технологічних процесів і виробництв факультету прикладних інформаційних технологій та електроінженерії Тернопільського національного технічного університету імені Івана Пулюя Міністерства освіти і науки України. Захист відбудеться «24» червня 2021 р. о 9.00 год. на засіданні екзаменаційної комісії №21 у Тернопільському національному технічному університеті імені Івана Пулюя.Дана кваліфікаційній робота складається з таких розділів: – вступу, де проводиться опис актуальності автоматизації лабораторного стенду для вимірювання рівня води за допомогою різних давачів рівня; – аналітичної частини, в якій проведено аналіз а також порівняння відомих давачів рівня води, а також, контролю і регулювання їх за допомогою Ардуїно та інших модулів підтримки; – проектної частини, в якій проводиться опис роботи обладнання і всіх вузлів, що використовується в лабораторному стенді для вимірювання рівня води; – спеціальної частини, в якій приведено опис використаних в дипломній роботі систем автоматизованого проектування; – безпеки життєдіяльності, основи охорони праці, де подано заходи по забезпеченню захисту робітників та безпечної роботи за лабораторним стендом.
This qualification work consists of the following sections: - introduction, which describes the relevance of automation of the laboratory stand for measuring the water level using various level sensors; - analytical part, in which the analysis and comparison of known water level sensors, as well as their control and regulation using Arduino and other auxiliary modules; - design part describing the operation of the equipment and all components used in the laboratory stand for measuring the water level; - a special part containing a description of automated design systems used in the thesis; - life safety, basics of labor protection, where measures are taken to ensure the protection of workers and safe work on the laboratory stand.
Вступ...8 1 Аналітична частина 1.1 Основні засоби вимірювання рівня води...9 1.2 Загальні типи вимірювання давачів рівня води...11 1.3 Використання мікроконтролерів...18 2 Проектна частина 2.1 Розробка структурної схеми...26 2.2 Розробка електричної принципової схеми...27 2.3 Обгрунтування вибору платформи Arduino Uno...28 2.4 Давач рівня води KJ342 та його взаємодія з Arduino...30 2.5 Рідкокристалічний РК-модуль 16 × 2 символів з Arduino...34 2.6 Двоканальний релейний модуль з Arduino...38 2.7 Регістр 74HC595 і взаємодія його з Arduino...41 3 Спеціальна частина 3.1 Аналіз роботи пристрою...46 3.2 Прошивка мікроконтролера та складання пристрою...46 3.3 Додаткові компоненти мікропроцесора Arduino...57 4 Безпека життєдіяльності, основи охорони праці 4.1 Загальні вимоги безпеки...61 4.2 Вимоги безпеки перед початком роботи...62 4.3 Вимоги безпеки під час роботи...63 4.4 Аналіз потенційно небезпечних та шкідливих виробничих факторів...65 4.5 Забезпечення нормальних умов праці...68 4.6 Розрахунок освітлення в приміщенні...69 4.7 Вимоги безпеки в аварійних ситуаціях...70 4.8 Вимоги безпеки після закінчення роботи...70 Висновки...74 Список використаних джерел...75
2
Svoboda, Luděk. "Systém včasné výstrahy před lokální povodní." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219710.
Full textAbstract:
The aim of this Master's thesis is to design a local flood warning system. The system consists of two basic types of units. The first unit is placed in the field usingsensors and evaluates the presence of water in an otherwise dry area. In the event of flooding sends a warning message using wireless technology. The second unit evaluates the warning messages and informs the personabout the situation via text messaging. Outdoor equipment is fullyautonomous and permanently placed in an outdoor environment. The system is designed based 8-bit microcontrollers. The main parametersinclude low power devices, mechanical durability and reliability.
3
Dutoit, Bertrand Michel. "Flat electromagnetic force-feedback pressure sensor /." Lausanne, 2001. http://library.epfl.ch/theses/?nr=2437.
Full text
4
Bhakta, Vikrant. "Performance analysis of an adaptive flat multi-aperture computational imaging sensor." Ann Arbor, Mich. : ProQuest, 2007. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1440436.
Full textAbstract:
Thesis (M.S. in Electrical Engineering)--S.M.U., 2007.Title from PDF title page (viewed Mar. 18, 2008). Source: Masters Abstracts International, Volume: 45-03, page: 1589. Adviser: Marc P. Christensen. Includes bibliographical references.
5
Virk, Akashdeep Singh. "Heat Transfer Characterization in Jet Flames Impinging on Flat Plates." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/52985.
Full textAbstract:
The experimental work involves calculation of radial distribution of heat transfer coefficient at the surface of a flat Aluminium plate being impinged by a turbulent flame jet. Heat transfer coefficient distribution at the surface is computed from the measured heat flux and temperature data using a reference method and a slope method. The heat transfer coefficient (h) has a nearly bell shaped radial distribution at the plate surface for H/d =3.3. The value of h drops by 37 % from r/d =0 to r/d= 2. Upon increasing the axial distance to H/d = 5, the stagnation point h decreased by 15%. Adiabatic surface temperature (AST) distribution at the plate surface was computed from the measured heat flux and temperature. AST values were found to be lower than the measured gas temperature values at the stagnation point. Radial distribution of gas temperature at the surface was estimated by least squares linear curve fitting through the convection dominated region of net heat flux data and was validated by experimental measurements with an aspirated thermocouple. For low axial distances (H/d =3.3), the gas temperature dropped by only 15 % from r/d = 0 to r/d = 2. Total heat flux distribution is separated into radiative and convective components with the use of calculated heat transfer coefficient and estimated gas temperatures. At H/d = 3.3, the radiation was found to be less than 25 % of the net heat flux for r/d ≤ 2.Master of Science
6
Homola, Jan. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391996.
Full textAbstract:
This diploma thesis deals with the project documentation for the execution of the pension for seniors. The land is located in the village of Kozlany. Pension serves long-term accommodation for 30 people. The building has one underground and three above-ground floors. The stop is done with a single-shell surface impermeable roof. The construction is designed as a monolithic skeleton.
7
Výtisková, Jana. "Senior cohousing." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227285.
Full textAbstract:
Senior cohousing is situated in the Moravian-Silesian Region in city Orlová and it is designed as complex. It is a new form of living for seniors in the Czech Republic. The loose translation could be „close neighbourly living for senior people. “ Access road to the complex is from Tešínská Street and then down the main road from the southeast on the car park. Near the car park there are three main buildings. Building A is the main common building for seniors’ meetings. Building B has a private doctor and a small gym. Building C is designed as technical premises. There are four types of family houses for seniors. Family house type 1 - in the complex 3x is suitable for two seniors. Family house type 2 - in the complex 2x is suitable for two seniors with moving difficulties. Family house type 3 - in the complex 3x is designed as semi-detached house for two senior couples. Family houses accommodate 30 seniors in 15 housing units. All the objects are brick, single-storey without cellar built up from HELUZ system with footings from plain concrete with foundation slab, flat roofs, contact insulation of perimeter walls, partly wood tiling. What is more, in senior cohousing there are senior playground, orchard park, lake, road inside the complex, pavements and paths.
8
Qureshi, Waqas. "Integrating Conductive Threads into Different Knitting Construction by Flat Knitting Machine to Create Stretch Sensitive Fabrics for Breathing Monitoring." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20938.
Full textAbstract:
During the last decade medical applications of textile sensors have been growing rapidly and textile sensors are the focal research point for many sensor projects. Textile sensors are still not available as a mainstream product to replace conventional electric sensors and electrodes. Textile sensors can be integrated in a textile garment to measure vital signs of a human being. In this regard stretch sensors are able to measure breathing rate of a person. In this project we use seamless knitting technique to make stretch sensors using conductive fibers. The resistance difference between stretching and relaxing of these sensors gives a pattern for human breathing. Four knitting structures with different conductive fibers are made and tested with cyclic tester to construct a graph between resistance and time to find the knitting structure which gives the best results. Tests are also done to check the results after washing. These sensors can be used in breathing monitoring of patients during daily life.Program: Master Programme in Textile Technology
9
QURESHI, WAQAS. "Integrating Conductive Threads into Different Knitting Construction by Flat Knitting Machine to Create Stretch Sensitive Fabrics for Breathing Monitoring." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-17449.
Full textAbstract:
During the last decade medical applications of textile sensors have been growing rapidly and textile sensors are the focal research point for many sensor projects. Textile sensors are still not available as a mainstream product to replace conventional electric sensors and electrodes. Textile sensors can be integrated in a textile garment to measure vital signs of a human being. In this regard stretch sensors are able to measure breathing rate of a person. In this project we use seamless knitting technique to make stretch sensors using conductive fibers. The resistance difference between stretching and relaxing of these sensors gives a pattern for human breathing. Four knitting structures with different conductive fibers are made and tested with cyclic tester to construct a graph between resistance and time to find the knitting structure which gives the best results. Tests are also done to check the results after washing. These sensors can be used in breathing monitoring of patients during daily life.Program: Master programme in Textile Technology
10
Stejskalová, Markéta. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372260.
Full textAbstract:
This work aims to develop projekt documentation for building construction. The projekt addresses the new construkction of a pension for seniors. Pension is located in the city of Kutná Hora in the Central Region. The object is designed for 34 people throughout the year. Pension has one underground and free above ground floors. The shape of the object is unspecified at several height levels. It is a reversed L-shaped with mid-point projections. Pension is bricked from ceramic blocks. The roof is a combination of a sliding flat roof and a console roof. The building is situated in a place of flat terrain.
11
Nomura, Satoshi. "Development and Application of a Ligth-Scanning pH-Imaging Microscope Using a Flat Semiconductor pH Seneor." Kyoto University, 2000. http://hdl.handle.net/2433/151554.
Full text
12
Juráň, Vladimír. "Dům pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410016.
Full textAbstract:
The diploma thesis deals with the design of a new building of a senior house in the village Sazovice. The new building is situated on flat terrain in the center of the village. The building has three floors and one underground. The purpose is to build a building for seniors' stay. Part of the building consists of technical, operational and storage premises. The remaining space is used for housing. There are two main entrances to the building from the west side, where a car park and an access road is. The roofing is designed with a single-layer flat roof loaded with gravel. Part of the roof construction is designed as a vegetation with a terrace.
13
Venhauer, Jaromír. "Domov pro seniory, Chotěboř - Na Koubku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392136.
Full textAbstract:
In my diploma thesis I elaborated a project for realization of the building. Its content is a home for the elderly, which is a three-storey building, where the first floor is designed as an operating section with a doctor's surgery, a medical equipment rental and a dining room with a kitchen. The remaining two above-ground floors are designed as 1 + KK or 1 + 1 flats. Each balcony is designed for each apartment. Further, there are nurses on these floors. The building is designed as brickwork made of brick blocks with additional mineral insulation thermal insulation, the roof structure being solved using pre-prestressed concrete reinforced concrete panels Spiroll. The roof is designed from flat sloping wedges.
14
Haessig, Germain. "Neuromorphic computation using event-based sensors : from algorithms to hardware implementations." Thesis, Sorbonne université, 2018. http://www.theses.fr/2018SORUS422/document.
Full textAbstract:
Cette thèse porte sur l’implémentation d’algorithmes événementiels, en utilisant, dans un premier temps, des données provenant d’une rétine artificielle, mimant le fonctionnement de la rétine humaine, pour ensuite évoluer vers tous types de signaux événementiels. Ces signaux événementiels sont issus d’un changement de paradigme dans la représentation du signal, offrant une grande plage dynamique de fonctionnement, une résolution temporelle importante ainsi qu’une compression native du signal. Sera notamment étudiée la réalisation d’un dispositif de création de cartes de profondeur monoculaires à haute fréquence, un algorithme de tri cellulaire en temps réel, ainsi que l’apprentissage non supervisé pour de la reconnaissance de formes. Certains de ces algorithmes (détection de flot optique, construction de cartes de profondeur en stéréovision) seront développés en parallèle sur des plateformes de simulation neuromorphiques existantes (SpiNNaker, TrueNorth), afin de proposer une chaîne de traitement de l’information entièrement neuromorphique, du capteur au calcul, à faible coût énergétiqueThis thesis is about the implementation of neuromorphic algorithms, using, as a first step, data from a silicon retina, mimicking the human eye’s behavior, and then evolve towards all kind of event-based signals. These eventbased signals are coming from a paradigm shift in the data representation, thus allowing a high dynamic range, a precise temporal resolution and a sensor-level data compression. Especially, we will study the development of a high frequency monocular depth map generator, a real-time spike sorting algorithm for intelligent brain-machine interfaces, and an unsupervised learning algorithm for pattern recognition. Some of these algorithms (Optical flow detection, depth map construction from stereovision) will be in the meantime developed on available neuromorphic platforms (SpiNNaker, TrueNorth), thus allowing a fully neuromorphic pipeline, from sensing to computing, with a low power budget
15
Koláčková, Michaela. "Objekt pro seniory Ořechov." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372190.
Full textAbstract:
The subject of the diploma thesis is processing of the technical part of the project documentation for the new three-storey home for elderly with partial basement, which is located in the village Ořechov. The object is situated on a flat terrain, which is situated little bit higher than local road. That was used for an architectonic conception of the house –basement is open and accessible by local road from the north side, the rest is under ground. The detached building is partly roofed by a flat green roof and partly roofed by flat roof covered with gravel. The object is divided into individual areas. In the second and third floor is living and social area. 11 dwelling units of different sizes are designed. First floor is also accessible to the public and together with entrance hall and reception, which is situated in the middle of the object with the main entrance on the east side, there are another two separate areas. The left wing serves as a medical department, in the right wing is cofé with his own staff facilities. In the basement is a utility room and storage areas.
16
Šenkýř, Michal. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265539.
Full textAbstract:
This master's thesis describes the design of new pension for seniors on the outskirts of the city of Zlín. The new building is situated in flat terrain. The building has three floors and no basement. The purpose of master’s thesis is to build a building for residential flats with a special purpose, partly for residential social care and provision of health care to seniors and the nearby surroundings. The remaining part of the building consists of social, administrative and facilities. Two separate entrances lead to the object. Both are accessible from the eastern boundary of the property. Roofing is solved by single-flat roof.
17
Krištofiaková, Nikola. "Rezidence pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392010.
Full textAbstract:
The diploma thesis deals with project documentation for the realization of the retirement residence in the city of Zlín. The building is designed as a detached building with three above-ground floors. On the first floor, there is a main-entrance which is oriented on the north-west. The entrance of the garden is oriented to the south-east. On the first floor, there are a canteen, cafe, facilities for employees, stair, mechanical´s room, and doctor´s office. On the second floor, there are 17 housing until, common room, drying room, and cleaning´s room. On the third floor, they are 13 housing until, two common room, drying room, cleaning´s room and terrace with the view to the garden. In the building is designed roofed atrium who is constituted with a light curtain wall. In the building is designed exterior steel stair who is oriented to the garden. Supporting system building is the frame with prestressed ceiling panels. The building is without a cellar, roofed with flat roofs
18
Hradilová, Kateřina. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226191.
Full textAbstract:
Content of this master´s thesis work is a project of Home for the elderly in Čejč based on requests of the investor. The object is designed as a three storey house in Porotherm system with both flat and oblique roof. There are 31 apartments located in this object. A disposal study is elaborated and a part of executive project documentation of the building is being set in this work.
19
Grigarová, Karolína. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265656.
Full textAbstract:
The aim of my diploma thesis is to elaborate project documentation for the execution of a new building home for elderly people. The intention is to construct a new apartment building for pensioners who are able to do activities of daily living. There can be found 24 lease flats for a maximum of 30 accommodated people. The home offers 12 hours care service and has rooms for carers, dining rooms, places for rehabilitation, outpatient care and stores for keeping accommodated people’s things. The whole area has wheelchair access and counts with the movement of people with reduced mobility. The building is designed as brick, using clay blocks which are put on concrete foundation strips. Thermal insulation is a combination of contact thermal insulation system and ventilated facade with hanging plates. The roofing is designed partly as a float double-shell roof with timber truss girder, and partly as a single-shell roof with concrete load-bearing structure. The drawing documentation has been created using computer programs AutoCAD, ArchiCAD, and the programs by doc. Dr. Ing. Zbyněk Svoboda (Teplo, Area, Stabilita, Simulace) and another simple computer programs like Excel were used for the thermal assessment.
20
Bílková, Šárka. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240141.
Full textAbstract:
The subject of the diploma theses is a house for the elderly. The building is designed on flat terrain in the Přerov cadastral, Dvořákova street. The building is designed for the permanent housing of the elderly, with the possibility of using day care services. There is a 25 residential units. The building is divided into two parts, three flors are supposed to living and the rest two floors made operating part. On the first floor there is a medical surgery, and a café. The building is designed of brick construction system ceramic blocks Porotherm. Ceiling structure is made of Porotherm Ceiling. The whole building is covered with flat roof. Home of the Elderly is designed as barrier-free.
21
Plodík, Lukáš. "Novostavba domova pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226676.
Full textAbstract:
The subject of the diploma thesis is a new-built home for the seniors in the village Lavicky. The building is designed on flat terrain. The main entrance is oriented to the west. It is a building with one basement and three floors. The building is designed of reinforced concrete frame with masonry infill from Heluz. Basement wall is made of reinforced concrete. The building is covered from one part of a gable roof and the second part of the flat roof that serves as a terrace. House is designed for desabled persons.
22
Vítek, Jan. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225756.
Full textAbstract:
This Diploma´s thesis proceses topic Pension for Seniors. The object is situated in Božetěchova street in Brno-Královo Pole. This house is new building, three-floored and partial basemented. Basement is a technical floor. On the first floor are spaces of services and offices. On the second and the third floor are situated twenty-eight flats. Shape of the house is „L“ and its basic dimensions are 39,0 x 38,0 meters. The building is finished with a single layered flat roof. Height of house is 10,715 meters. The base structures is of conrete C16/20. The bearing walls on 1S are of monolithic reinforced concrete. Other Bering construction system is used of Porotherm. The staircase structure consists is of monolithic reinforced concrete.
23
Šafář, Petr. "Rezidence pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227199.
Full textAbstract:
Diploma´s thesis of Senior citizens' home is compile in project documentation by legislation in force. Object is situated on plat 260/3 in Sadová. In the building, there are part with apartments and coffee room. It is three-storey cellarless building with flat roof. Acces to building and coffee room is barier-free including parking. House is with elevator. In each floor is barrier-free apartment. Project is compile including static analysis of connection girder, fire safety solution and thermal technical assessment.
24
Jureček, Jiří. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227846.
Full textAbstract:
The subject of the diploma thesis is a home for the seniors in the village Nové Veselí. The building is designed on flat terrain. The main entrance is oriented to the north. It is a building with one basement and three floors. The building is designed of brickwork POROTHERM. Basement wall is made of reinforced concrete. The building is covered flat roof. House is designed for desabled persons.
25
Polaček, Filip. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372160.
Full textAbstract:
The diploma thesis deals with the design of the project documentation of the home for the elderly in the village of Šoporňa, in the territory of the Slovak Republic. The building is designed as a detached building with three above-ground floors, partly underground. The building consists of a public section on the ground floor, where are situated services for residents and the general public such as hairdressing and cosmetics, doctors and dentists, cafes, massages and shop. There are also offices for administation, the dining room for the employees and the guests. First floor and second floor is designed for seniors, there is also a common room on each floor. The cellar part is designed for the interest of the guests, partly serves as a technical room. The third part of cellar serves as space for the maintenance of the building, the general storage areas and storage areas for business activity. Building is covered with warn flat roof with emergency breakwaters. The structure is based on the foundation pads and the structural system of the building is RC frame. The ceramic cavity blocks with contact insulation and ventilated facade are used on the infill walls. In the southern part of the building there will be a relaxing park and a relaxing garden.
26
Voráč, Roman. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240132.
Full textAbstract:
Content of this thesis is proces and structural layout design of subject „SENIORS’ BOARDINGHOUSE“. It’s a wide subject, which south wing is designed as single-storey with cellarage, central subject is two-storeyd without cellarage. Wooden shelters are connected to north and south wing. Architecture has been chosen in order to make a subject evoking calm and positive impression for retirement aged persons living. Roof structure is double-pitched shape with two main skylights. Roof is red coloured and a facade is white. Interior space of subject is designed to satisfy a demands for comfortable living of single persons (one-room flats) as well as retirement aged couples (2+KK flats). Round the subject there are situated further tinier subjects there designed for utilization by seniors, but for those who are still active. Subject is brick, founded on continuous footing and spreading slab. Roof structure is constructed of wooden bearing rafter framework which is, in case of main object, designed with central binding rafter and collar roof in case of north and south wing. Subject is insulated with External Thermal Insulation Composite System, roof is covered by ceramic roof covering in combination with folded sheet metal covering. Main living quarters is situated in first and second above-ground storey of central subject, restaurant with background lie in south wing and wellness available for public as well is situated in north wing. In basement of south wing there is technical background of whole subject situated there as is garage, technical room, service room, bicycle room and storage. Next the kitchen staff background including storages for kitchen lie here.
27
Čunek, Jiří. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226397.
Full textAbstract:
Subject of this Master thesis is project of new building Home for the Elderly. Object has 3 overgrounds floors. Part of the object has a cellar. There is also restaurant which is covered green roof. Another parts of objects are covered by flat roof. Home for the Elderly is well connected with nature. Capacity of the home is 26 seniors. Most apartments are for singles.
28
Podola, Michal. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227677.
Full textAbstract:
Project documentation addresses the construction of the building Pension for seniors in Chomýž. The plot is close to the village center. It is a detached new build. The building is used for senior housing in a very quiet area. There is one part of a building apartments 1 bedroom and 2 bedroom apartments. In the second part of the building, which serves not only seniors, but also close to the public, is dining with dispensaries, further a patisserie, general practitioner, pedicure and hairdressing. The building and access roads designed for the disabled. The aim of the project documentation is to increase the comfort of the service in the village Chomýž.
29
Knapčíková, Šárka. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240215.
Full textAbstract:
The aim of diploma thesis is elaborate the project documentation to execution of a new building home for the elderly. The building is detached and situated in a sloping terrain on the selected piece of land in the cadastral area of Smíchov in Prague 5. This new building is designated for permanent housing for persons of retirement age with a good level of their ability to perform routine daily tasks and take care of themselves, but also for people without this ability. Home for the Elderly offers a 40 beds in single and double rooms. The building has three above grounds and one underground floor. The entire building is expected movement of persons with reduced mobility. Entry to the first functional part is located on the north side of the home. It consists of a reception room and each floors with rooms. In the home for the elderly is 30 rooms with private bathroom. The second function of the operation home is located in the basement floor, entrance is possible from the south or staircase or elevator from the first floor. All floors are connected by two staircases, and three elevators. The object is designed in a technology of Porotherm system. Roof structure consists of single-layer flat roof with a classic sequence of layers, combined DUO and extensive green. The project documentation which is needed for a realization of a new home for the elderly is worked up with eight structural details including in a computer program AutoCAD.
30
Dvořáková, Jana. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409989.
Full textAbstract:
The aim of this diploma thesis is to elaborate the project documentation of a new-built home for the elderly, in the cadastre unit of small town Blížkovice. It is a three-storey building with a basement. On the basement there are cellar berths, garage and technical facilities. On the first floor there is facilities, dining rom, a doctor´s surgery, massage, hairdresser´s and pedicure. On the second and third floor there are common areas and a total of twenty-two residentail units (1+kk – eighteen flats, 2+kk – two flats). The vertical loadbearing structures are made of clay blocks and lost formations. The object is insulated by a contact thermal insulation systém. The horizontal loadbearing structures and staircase are made of reinforced monolithic concrete slab. The roof consists of a flat roof with extensive green and terrace. There are ten parking spaces on the ground.
31
Kofl, Tomáš. "Dům pro seniory ve Vyškově." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239995.
Full textAbstract:
The subject of the diploma thesis is a new-built home for the seniors in the village Vyškov. The building is designed on a slightly sloping terrain. The main entrance is oriented to the northeast. It consists of one building divided into three expansion units. It is a building with a partial basement floor and three floors. The building is designed from reinforced concrete frame with masonry infill Porotherm. The ceiling structure is designed from a continuous cross -reinforced monolithic reinforced concrete slabs. The building is covered with a flat roof. House is designed for desabled persons.
32
Fikar, Matěj. "Domov pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226674.
Full textAbstract:
This thesis addresses building of a new home for seniors with a special care on the street Zahradni in Pilsen. The relevant estate lies on the compound of a former paper mill on the right bank of the Radbuza river near the Papirensky bridge. When the proposition for the building was being drafted, an extra focus was placed on the special care regime. This means continuous home and nursing care with medical oversight including a guaranteed care for patients with special needs, such as those suffering from dementia, Alzheimer's disease or those with psychiatric issues in a stabilized stage. The proposed capacity of the home for the Aged consists of 142 beds in three above-ground floors, which also contain lounges that double as canteens. The underground floor houses the kitchen whit catering equipments, which will only be used for this object, the main lounge, exercise and creative areas, as well as staff rooms including those of the management. This type of a facility is currently in great demand in the Czech Republic due to the insufficient capacity of similar social and health facilities.
33
Nykodým, Petr. "Penzion pro seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265691.
Full textAbstract:
The subject of my diploma thesis is the design documentation for the pension which is designed for the elderly and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the western part of the town Bystřice nad Pernštejnem and it's located at 3058/3 about the total area of 8315,2m. The total footprint of the suggested building is 1161,2 m. The subject has got an irregularly-shaped floor plan. It is made of three subsequent triangels, it has got three above-ground floors with partial basement. The roof of the building is suggested as a warm flat roof with coating insulation. The structural system of a building is designed as longitudinal with shear walls. The exterior building masonry is suggested from sharpened clay blocks Heluz STI 40 with thickness 400 mm. The contact thermal insulation system ETICS with an insulant from EPS with thickness 100 mm is designed for all building. The building for the elderly is from its bigger part meant for citizens who are older than 65 years in the flats for one or two persons in 2FLR and 3FLR. The space for essential services to the residents is located on the 1st FLR. There are also a cafe and a surgery located in a smaller part of the 1st FLR, which are to be used both by the residents and the public.
34
Konečná, Petra. "Domov pro seniory v Telnici." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225749.
Full textAbstract:
Topic of this master’s thesis is a retirement house in village Telnice. The project was designed directly for village Telnice according to their requirements. It is a three-floor construction complied with country style. The building has a saddle roof. A flat roof is used over terraces which join each floor with the outside. Construction material is brick masonry with a thermal insulation system. Parts of the diploma’s thesis are also calculations of the thermal-technical parameters and fire safety of the building, concrete structures and technical equipments of building.
35
Kauzlaričová, Eva. "Zařízení s ústavní péčí o seniory." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227852.
Full textAbstract:
Subject of the project is new building of medical equipment with institutional care for seniors. Building is located in Brno, in city part Brno-centre. Objective was to elaborate the project documentation for realization of the medical equipment with institutional care. Capacity of the equipment is maximum 28 patients. Building is situated in sloping terrain. Building has three aboveground floors and one underground floor. Bed part is designed as the masonry construction; dining part is the skeletal construction. Skeletal construction consists of reinforced concrete prefabricated panels; bricked part is of the type system THERM. Both parts are thermally insulated. The roof is designed as the flat single-layer structure.
36
Tomaňová, Zuzana. "Bydlení v bývalém továrním areálu OP Prostějov." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2014. http://www.nusl.cz/ntk/nusl-216101.
Full textAbstract:
This project is focused on the conversion of the former factory area of OP Prostejov company, which is located in the Eastern part of the city Prostejov, close to the R46 highway. OP Prostejov company bankrupted in the year 2010 and since that year the area has been falling into disrepair. I approach this area in my thesis as new polyfunctional city district, which contains places for sport, relaxing, administration, commercialism, education, culture and living. I focus especially on the living function of this area, which is located in its Eastern part. Nowadays those buildings are being gradually dismantled, most of their parts have been practically taken out but the supporting construction system still remains. The view to those naked objects (bare steel-concrete skeleton) let us to see the energy of the historical development and also the legacy of the industrial past period. That historical view became the basement of my concept. My idea is to create different flats by the combination of separate units and residential containers (see scheme of flats). The flat solutions are done in some variations (from 1+kk to 3+kk). The entrances to the flats are from the external area, with some stairs and their own garden - it means analogically to live in family house, which is the dream of many people.
37
Tománková, Marie. "Domov pro seniory, domov se zvláštním režimem." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391880.
Full textAbstract:
The subject of my diploma thesis is the design of a new building "retirement home", a home with a special regime, in the form of project documentation for the construction. The building is partly basement with four above-ground floors and covered by a single-layer flat roof. On the first floor there are common, operational spaces and spaces for commercial use. The other above-ground floors are identical and serve as an accommodation. There is mostly technical background in the basement. The construction system is a wall bi-directional of brick masonry elements, with the exception of basement masonry, which is made of reinforced concrete. The object is based on foundation pads and strips. Ceiling structures are monolithic reinforced concrete. The whole building is insulated by contact insulation and has a ventilated facade.
38
Malcharková, Veronika. "Domov pro seniory, domov se zvláštním režimem." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392141.
Full textAbstract:
The subject of my diploma thesis is the design of a home for the elderly, a home with a special regime in the form of project documentation for the construction. The house is designed as stand-alone and wheelchair accessible. The building is partly basement, with four above-ground floors. On the first floor there are social and operational spaces of the home for seniors and there is also commercial use. The other above-ground floors include individual client rooms and operational background. The construction system of the whole building is a transverse wall. The building is based on concrete foundation. The external wall is made of clay block and the floor structure is made of cast-in-place reinforced slab. Basement loadbearing masonry is monolithic reinforced concrete. The staircase is a monolithic reinforced concrete and a lift is in the mirror of the staircase. The object is roofed with warm flat roof. Other part of this thesis is an assessment of building physics and fire safety requirements.
39
Alm, Ia, and Nicole Lundström. "Hur platt kan det vara? : En studie om seniorers förståelse av skeumorfism och platt design inom e-hälsa." Thesis, Högskolan Kristianstad, Fakulteten för ekonomi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hkr:diva-18229.
Full textAbstract:
Digitaliseringens framfart skapar problem för seniorer som har svårt att hänga med i den moderna teknikens utveckling. Samtidigt har Sveriges regering satt som mål att år 2025 ha digitaliserat hälsovården. I samband med trenden att använda sig av platt design i digitala plattformar försvåras seniorers situation ytterligare och kan ha en negativ effekt i hänseende att utöka den digitala klyftan. Tidigare forskning visar att den platta designens formspråk är svårare att förstå än den traditionella, skeumorfa design som tidigare använts, då platt design saknar affordanser. Detta examensarbete har haft för avsikt att undersöka huruvida platt design är svårare för seniorer att förstå jämfört med traditionell, skeumorf design, samt se hur designprincipen affordans skulle kunna avhjälpa problemet med förståelsen av platt design. Examensarbetet har vägletts av frågeställningen: Hur påverkas seniorers förståelse av platt design i jämförelse med traditionell design i kontexten av webbplatser och vilken betydelse har affordans för att stödja deras förståelse? För att besvara frågeställningen har en kvantitativ enkätundersökning samt en kvalitativ observationsstudie utförts i syfte att utreda frågeställningens variabler utifrån tidigare teorier. Resultatet visar att affordans inte tycks ha någon betydelse för hur seniorer förstår ett designgränssnitt. Däremot syns indikationer för att designprinciper som visuella ledtrådar, eller signifiers, är av stor vikt att ta hänsyn till vid framtagande av design för en senior målgrupp.The vast progress of digitization creates problems for the seniors who find it hard to keep up with modern technology development. At the same time, the Swedish government has set itself the goal of digitizing health care by 2025. In connection with the trend of using flat design in digital platforms, the situation of seniors is further complicated and may have a negative effect in expanding the digital divide. Previous research shows that the style of the flat design is more difficult to understand than the traditional, skeuomorphic design previously used, as flat design lacks affordances. The aim of this thesis has been to investigate whether flat design is more difficult for seniors to understand than traditional skeuomorphic design, as well as how the design principle affordance could solve the problem of understanding flat design. The thesis has been guided by the question: How are seniors' understanding of flat design compared to traditional design in the context of websites and what significance does affordance have to support their understanding? To answer the question, a quantitative questionnaire survey and a qualitative observation study have been conducted to investigate the variables of the question based on previous theories. The result shows that affordance does not seem to affect how seniors understand a design interface. On the other hand, indications suggest that design principles such as visual clues, or signifiers, are important to consider when designing for a senior audience design.
40
Amhaz, Hawraa. "Traitement d'images bas niveau intégré dans un capteur de vision CMOS." Phd thesis, Université de Grenoble, 2012. http://tel.archives-ouvertes.fr/tel-00838399.
Full textAbstract:
Le traitement d'images classique est basé sur l'évaluation des données délivrées par un système à basede capteur de vision sous forme d'images. L'information lumineuse captée est extraiteséquentiellement de chaque élément photosensible (pixel) de la matrice avec un certain cadencementet à fréquence fixe. Ces données, une fois mémorisées, forment une matrice de données qui estréactualisée de manière exhaustive à l'arrivée de chaque nouvelle image. De fait, Pour des capteurs àforte résolution, le volume de données à gérer est extrêmement important. De plus, le système neprend pas en compte le fait que l'information stockée ai changé ou non par rapport à l'imageprécédente. Cette probabilité est, en effet, assez importante. Ceci nous mène donc, selon " l'activité "de la scène filmée à un haut niveau de redondances temporelles. De même, la méthode de lectureusuelle ne prend pas en compte le fait que le pixel en phase de lecture a la même valeur ou non que lepixel voisin lu juste avant. Cela rajoute aux redondances temporelles un taux de redondances spatialesplus ou moins élevé selon le spectre de fréquences spatiales de la scène filmée. Dans cette thèse, nousavons développé plusieurs solutions qui visent contrôler le flot de données en sortie de l'imageur enessayant de réduire les redondances spatiales et temporelles des pixels. Les contraintes de simplicité etd'" intelligence " des techniques de lecture développées font la différence entre ce que nousprésentons et ce qui a été publié dans la littérature. En effet, les travaux présentés dans l'état de l'artproposent des solutions à cette problématique, qui en général, exigent de gros sacrifices en terme desurface du pixel, vu qu'elles implémentent des fonctions électroniques complexes in situ.Les principes de fonctionnement, les émulations sous MATLAB, la conception et les simulationsélectriques ainsi que les résultats expérimentaux des techniques proposées sont présentés en détailsdans ce manuscrit.
41
Christie, Breanne P. "Multisensory Integration of Lower-Limb Somatosensory Neuroprostheses: from Psychophysics to Functionality." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1575564218875779.
Full text
42
Husain, Muhammad Dawood. "Development of temperature sensing fabric." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/development-of-temperature-sensing-fabric(0e5e8367-c3b2-4cff-bcc9-f32fac97b50f).html.
Full textAbstract:
Human body temperature is an important indicator of physical performance and condition in terms of comfort, heat or cold stress. The aim of this research was to develop Temperature Sensing Fabric (TSF) for continuous temperature measurement in healthcare applications. The study covers the development and manufacture of TSF by embedding fine metallic wire into the structure of textile material using a commercial computerised knitting machine. The operational principle of TSF is based on the inherent propensity of a metal wire to respond to changes in temperature with variation in its electrical resistance. Over 60 TSF samples were developed with combinations of different sensing elements, two inlay densities and highly textured polyester yarn as the base material. TSF samples were created using either bare or insulated wires with a range of diameters from 50 to 150 μm and metal wires of nickel, copper, tungsten, and nickel coated copper. In order to investigate the Temperature-Resistance (T-R) relationship of TSF samples for calibration purposes, a customised test rig was developed and monitoring software was created in the LabVIEW environment, to record the temperature and resistance signals simultaneously. TSF samples were tested in various thermal environments, under laboratory conditions and in practical wear trials, to analyse the relationship between the temperature and resistance of the sensing fabric and to develop base line specifications such as sensitivity, resistance ratio, precision, nominal resistance, and response time; the influence of external parameters such as humidity and strain were also monitored. The regression uncertainty was found to be less than in ±0.1°C; the repeatability uncertainty was found to be less than ±0.5°C; the manufacturing uncertainty in terms of nominal resistance was found to be ± 2% from its mean. The experimental T-R relationship of TSF was validated by modelling in the thermo-electrical domain in both steady and transient states. A maximum error of 0.2°C was found between the experimental and modelled T-R relationships. TSF samples made with bare wire sensing elements showed slight variations in their resistance during strain tests, however, samples made with insulated sensing elements did not demonstrate any detectable strain-dependent-resistance error. The overall thermal response of TSF was found to be affected by basal fabric thickness and mass; the effect of RH was not found to be significant. TSF samples with higher-resistance sensing elements performed better than lower-resistance types. Furthermore, TSF samples made using insulated wire were more straightforward to manufacture because of their increased tensile strength and exhibited better sensing performance than samples made with bare wire. In all the human body wear trials, under steady-state and dynamic conditions both sensors followed the same trends and exhibited similar movement artifacts. When layers of clothing were worn over the sensors, the difference between the response of the TSF and a high-precision reference temperature were reduced by the improved isothermal conditions near the measurement site.
43
Francillon, Aurélien. "Attacking and Protecting Constrained Embedded Systems from Control Flow Attacks." Phd thesis, Grenoble INPG, 2009. http://tel.archives-ouvertes.fr/tel-00540371.
Full textAbstract:
La sécurité des systèmes embarqués très contraints est un domaine qui prend de l'importance car ceux-ci ont tendance à être toujours plus connectés et présents dans de nombreuses applications industrielles aussi bien que dans la vie de tous les jours. Cette thèse étudie les attaques logicielles dans le contexte des systèmes embarqués communicants par exemple de type réseaux de capteurs. Ceux-ci, reposent sur diverses architectures qui possèdent souvent, pour des raisons des coût, des capacités de calcul et de mémoire très réduites. Dans la première partie de cette thèse nous montrons la faisabilité de l'injection de code dans des micro-contrôleurs d'architecture Harvard, ce qui était, jusqu'à présent, souvent considéré comme impossible. Dans la seconde partie nous étudions les protocoles d'attestation de code. Ceux-ci permettent de détecter les équipements compromis dans un réseau de capteurs. Nous présentons plusieurs attaques sur les protocoles d'attestation de code existants. De plus nous proposons une méthode améliorée permettant d'éviter ces attaques. Finalement, dans la dernière partie de cette thèse, nous proposons une modification de l'architecture mémoire d'un micro-contrôleur. Cette modification permet de prévenir les attaques de manipulation du flot de contrôle, tout en restant très simple a implémenter.
44
Darwish, Amani. "Capteur d'images événementiel, asynchrone à échantillonnage non-uniforme." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAT071/document.
Full textAbstract:
Face aux défis actuels liés à la conception de capteurs d'images à forte résolution comme la limitation de la consommation électrique, l'augmentation du flux de données ainsi que le traitement de données associé, on propose, à travers cette thèse, un capteur d'image novateur asynchrone à échantillonnage non uniforme.Ce capteur d’images asynchrone est basé sur une matrice de pixels événementiels qui intègrent un échantillonnage non uniforme par traversée de niveaux. Contrairement aux imageurs conventionnels, où les pixels sont lus systématiquement lors de chaque trame, les pixels événementiels proposés sont consultés que lorsqu’ils contiennent une information pertinente. Cela induit un flux de données réduit et dépendant de l’image.Pour compléter la chaîne de traitement des pixels, on présente également une architecture numérique de lecture dédiée conçue en utilisant de la logique asynchrone et destinée à contrôler et à gérer le flux de données des pixels événementiels. Ce circuit de lecture numérique permet de surmonter les difficultés classiques rencontrées lors de la gestion des demandes simultanées des pixels événementiels sans dégrader la résolution et le facteur de remplissage du capteur d’images. En outre, le circuit de lecture proposé permet de réduire considérablement les redondances spatiales dans une image ce qui diminue encore le flux de données.Enfin, en combinant l'aspect échantillonnage par traversée de niveau et la technique de lecture proposée, on a pu remplacer la conversion analogique numérique classique de la chaîne de traitement des pixels par une conversion temps-numérique (Time-to-Digital Conversion). En d'autres termes, l'information du pixel est codée par le temps. Il en résulte une diminution accrue de la consommation électrique du système de vision, le convertisseur analogique-numérique étant un des composants les plus consommant du système de lecture des capteurs d'images conventionnelsIn order to overcome the challenges associated with the design of high resolution image sensors, we propose, through this thesis, an innovative asynchronous event-driven image sensor based on non-uniform sampling. The proposed image sensor aims the reduction of the data flow and its associated data processing by limiting the activity of our image sensor to the new captured information.The proposed asynchronous image sensor is based on an event-driven pixels that incorporate a non-uniform sampling crossing levels. Unlike conventional imagers, where the pixels are read systematically at each frame, the proposed event-driven pixels are only read when they hold new and relevant information. This induces a reduced and scene dependent data flow.In this thesis, we introduce a complete pixel reading sequence. Beside the event-driven pixel, the proposed reading system is designed using asynchronous logic and adapted to control and manage the flow of data from event pixels. This digital reading system overcomes the traditional difficulties encountered in the management of simultaneous requests for event pixels without degrading the resolution and fill factor of the image sensor. In addition, the proposed reading circuit significantly reduces the spatial redundancy in an image which further reduces the data flow.Finally, by combining the aspect of level crossing sampling and the proposed reading technique, we replaced the conventional analog to digital conversion of the pixel processing chain by a time-to-digital Conversion (TDC). In other words, the pixel information is coded by time. This results in an increased reduction in power consumption of the vision system, the analog-digital converter being one of the most consuming reading system of conventional image sensors components
45
Seddiki, Sélim. "Contribution au développement du détecteur de Vertex de l'expérience CBM et étude de faisabilité des mesures du flot elliptique des particules à charme ouvert." Phd thesis, Université de Strasbourg, 2012. http://tel.archives-ouvertes.fr/tel-00862654.
Full textAbstract:
CBM, une des expériences majeures du nouvel accélérateur FAIR en cours de construction au GSI (Darmstadt), a pour objectif d'explorer le diagramme des phases de la matière nucléaire dans la région des hautes densités baryoniques nettes. Un de ses principaux thèmes de physique est l'étude de la production des particules à charme ouvert dans les collisions d'ions lourds. La mesure directe de ces particules nécessite l'utilisation d'un détecteur de vertex très précis. La présente thèse est une contribution à la conception et au développement de ce détecteur, appelé MVD. Une première partie de la thèse concerne l'évaluation, à l'aide de simulations réalistes, des flots de données à transmettre par les capteurs qui équiperont la première génération du MVD. Les résultats obtenus montrent que les performances attendues des capteurs permettront de mener à bien le programme de physique de CBM. Une deuxième partie porte sur les performances attendues pour la reconstruction des particules à charme ouvert, à travers leur désintégration hadronique, dans les collisions Au+Au. Des simulations détaillées ont permis de démontrer que la reconstruction du méson D+ → π+ π+ K-, par exemple, est faisable avec une efficacité de reconstruction de 2% et un rapport signal/bruit de 1.5. La statistique attendue en deux mois de prises de données a été évaluée à environ 6.9 x 104 mésons D. Dans la dernière partie, il a été montré que cette statistique permettrait d'effectuer des études détaillées du flot elliptique intégré des mésons D. La mesure du flot elliptique différentiel de ces particules requerrait, cependant, des statistiques plus élevées, et donc l'utilisation de capteurs plus performants.
46
Favarin, Gilmar. "Protocolo ciente de correlação espacial para redes de sensores sem fio." Universidade Federal de São Carlos, 2011. https://repositorio.ufscar.br/handle/ufscar/494.
Full textAbstract:
Made available in DSpace on 2016-06-02T19:05:56Z (GMT). No. of bitstreams: 1
4225.pdf: 931319 bytes, checksum: 2be2e5e88eb314cf8769dabd2749e671 (MD5)
Previous issue date: 2011-06-27Financiadora de Estudos e Projetos
The usage of wireless sensor network is increasingly being applied to people s everyday lives everywhere: from energy consumption in households and buildings in general, to vital signs in assistive medicine, infrastructure monitoring, chemical or biological product leaking detection in industries, better surveillance, environmental monitoring, among many others. WSN can be deployed in different densities next to several thousands of nodes. However, the development of WSN solutions are limited mainly by energy resource restriction. The great challenge to WSN solutions is to increase the network longevity while guaranteeing data delivery, reliability and accuracy in an environment prone to different types of failures. The largest source of energy consumption is data transmission. Thus, solutions to WSN needs to avoid intense communication keeping energy consumption balance and so the network longevity. In applications in which high density of nodes is necessary, sensing process can produce a large amount of data which are similar or redundant, due to the special proximity among the nodes. This spatial proximity can be explored in routing solutions to reduce the amount of messages transmitted throughout the network. This work presents the Spatial Correlation Aware Routing Protocol - SCARP , which makes use of spatial correlation to reduce the number of network transmissions. With SCARP, the WSN is configured in cells and nodes of each cell are selected, in an alternated way, to transmit similar or redundant data, and so reducing the number of transmitted messages. This traffic reduction results in less energy consumption and longer network longevity. Evaluation results show that SCARP outperforms similar solutions described in the literature, such as DAARP, which uses clustering and aggregation. SCARP has a positive performance even for large node density scenarios.
Redes de Sensores Sem Fio (RSSFs) estão sendo cada vez mais utilizadas na vida diária das pessoas em aplicações que incluem desde monitoramento de gasto de energia em residências e prédios em geral, até monitoramento de sinais vitais para medicina assistida, monitoramento de infraestruturas físicas, vazamentos de produtos químicos ou biológicos em indústrias, vigilância para melhoria de segurança, monitoramento ambiental, dentre inúmeras outras. RSSFs podem ser implantadas em diferentes densidades podendo chegar a milhares de nós. No entanto, o desenvolvimento de soluções baseadas em RSSFs é limitado, principalmente, por recursos restritos dos nós sensores, em especial recursos energéticos. O grande desafio de soluções para RSSFs é aumentar a longevidade da rede e, ao mesmo tempo, garantir a entrega, confiabilidade e precisão dos dados coletados diante de um ambiente propício a falhas de diferentes tipos. A maior fonte de consumo de energia é a transmissão de mensagens. Assim, soluções de RSSF têm que evitar comunicação intensa, mantendo o balanceamento do consumo de energia e, assim, a longevidade da rede. Em aplicações onde é necessária alta densidade de nós sensores, o processo de sensoriamento pode produzir grande quantidade de dados similares ou redundantes devido à proximidade espacial entre esses nós. Esta proximidade espacial pode ser explorada em soluções de roteamento para reduzir a quantidade de mensagens transmitidas pela rede. Este trabalho apresenta o algoritmo de roteamento SCARP (Spatial Correlation Aware Routing Protocol), que faz uso da correlação espacial para reduzir o número de transmissões pela rede. Com o SCARP, a RSSF é configurada em células e nós de cada célula são escolhidos, de maneira alternada, para transmitir dados similares ou redundantes, reduzindo assim o número de mensagens transmitidas. Essa redução de tráfego resulta em menor consumo de energia e maior longevidade da rede. Resultados de avaliação de desempenho mostram que SCARP supera soluções semelhantes descritas na literatura como o DAARP, que utiliza clusterização e agregação de dados, e mantém o desempenho positivo mesmo em situações de grande densidade de nós.
47
Sviták, Tomáš. "Domov pokojného stáří." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240446.
Full textAbstract:
The subject of this thesis is a design documentation for new construction of the elderly house in Austerlitz. The building has one underground and two or three floors. Designed capacity is 40 clients in the house. In addition to the accommodation of seniors also provides catering facility, motivational activities and other services connected with the activities of the senior home under the Act on Social Services. From a structural point of view it is an object of a wall brick supporting system, ceiling structures are made of panels of prestressed concrete. Roofs are designed flat single shell.
48
Tušl, David. "Novostavba ústavu sociální péče - Bílá voda." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372148.
Full textAbstract:
The subject of my master’s thesis deals with design of a new social care institution building. The building is located on land with spectacular view in Kratochvilka village. The building has four floors and basement. The building has forty beds for seniors and limited options of catering service. The building consists dining room, offices and nurse room on the first floor. Surgery, massage saloon and technical background is located in the basement. On the second, third and fourth floor are senior’s rooms. The walls will consist of bricks with an additional contact thermal insulation system ETICS, the ceiling will be reinforced concrete constructions and the house will have a walkable flat green roof. Design documentation was processed using the program AutoCAD 2014.
49
Hasoň, Václav. "Objekt občanské vybavenosti." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409999.
Full textAbstract:
The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.
50
Deobarro, Mikaël. "Etude de l'immunité des circuits intégrés face aux agressions électromagnétiques : proposition d'une méthode de prédiction des couplages des perturbations en mode conduit." Thesis, Toulouse, INSA, 2011. http://www.theses.fr/2011ISAT0002/document.
Full textAbstract:
Avec les progrès technologiques réalisés au cours de ces dernières décennies, la complexité et les vitesses de fonctionnement des circuits intégrés ont beaucoup été augmentées. Bien que ces évolutions aient permis de diminuer les dimensions et les tensions d’alimentations des circuits, la compatibilité électromagnétique (CEM) des composants a fortement été dégradée. Identifiée comme étant un verrou technologique, la CEM est aujourd’hui l’une des principales causes de « re-design » des circuits car les problématiques liées aux mécanismes de génération et de couplage du bruit ne sont pas suffisamment étudiées lors de leur conception.Ce manuscrit présente donc une méthodologie visant à étudier la propagation du bruit à travers les circuits intégrés par mesures et par simulations. Afin d’améliorer nos connaissances sur la propagation d’interférences électromagnétiques (IEM) et les mécanismes de couplage à travers les circuits, nous avons conçu un véhicule de test développé dans la technologie SMOS8MV® 0,25 µm de Freescale Semiconductor. Dans ce circuit, plusieurs fonctions élémentaires telles qu’un bus d’E/S et des blocs numériques ont été implémentées. Des capteurs de tensions asynchrones ont également été intégrés sur différentes alimentations de la puce pour analyser la propagation des perturbations injectées sur les broches du composant (injection DPI) et sur les conducteurs permettant d’alimenter ce dernier (injection BCI). En outre, nous proposons différents outils pour faciliter la modélisation et les simulations d’immunité des circuits intégrés (extraction des modèles de PCB, approches de modélisation des systèmes d’injection, méthode innovante permettant de prédire et de corréler les niveaux de tension/ de puissance injectés lors de mesures d’immunité conduite, flot de modélisation). Chaque outil et méthode de modélisation proposés sont évalués sur différents cas test. Enfin, pour évaluer notre démarche de modélisation, nous l’appliquons sur un bloc numérique de notre véhicule de test et comparons les résultats de simulations aux différentes mesures internes et externes réalisées sur le circuitWith technological advances in recent decades, the complexity and operating speeds of integrated circuits have greatly increased. While these developments have reduced dimensions and supply voltages of circuits, electromagnetic compatibility (EMC) of components has been highly degraded. Identified as a technological lock, EMC is now one of the main causes of circuits re-designs because issues related to generating and coupling noise mechanisms are not sufficiently studied during their design. This manuscript introduces a methodology to study propagation of electromagnetic disturbances through integrated circuits by measurements and simulations. To improve our knowledge about propagation of electromagnetic interferences (EMI) and coupling mechanisms through integrated circuits, we designed a test vehicle developed in the SMOS8MV® 0.25µm technology from Freescale Semiconductor. In this circuit, several basic functions such as I/O bus and digital blocks have been implemented. Asynchronous on-chip voltage sensors have also been integrated on different supplies of the chip to analyze propagation of disturbances injected on supply pins and wires of the component (DPI and BCI injection). In addition, we propose various tools to facilitate modeling and simulations of Integrated Circuit’s immunity (PCB model extraction, injection systems modeling approaches, innovative method to predict and correlate levels of voltage / power injected during conducted immunity measurements, modeling flow). Each tool and modeling method proposed is evaluated on different test cases. To assess our modeling approach, we finally apply it on a digital block of our test vehicle and compare simulation results to various internal and external measurements performed on the circuit