Books on the topic 'Flow Calibration'

Hayward, Alan. Pipe provers: A user's manual. Cambridge [England]: Cambridge University Press, 1991.

Christianus Bernardus Maria Te Stroet. Calibration of stochastic groundwater flow models: Estimation of noise statistics and model parameters. [Delft: Eburon], 1995.

1952-, Ophori Duke Urhobo. Regional groundwater flow in the Atikokan research area: Model development and calibration. Pinawa, Man: AECL, Whiteshell Laboratories, 1996.

Ophori, Duke U. Regional groundwater flow in the Atikokan Research Area: Model development and calibration. Pinawa, Man: Whiteshell Laboratories, 1996.

Brooks, Cuyler W. The NASA Langley 8-Foot Transonic Pressure Tunnel calibration. Hampton, Va: Langley Research Center, 1994.

Brooks, Cuyler W. The NASA Langley 8-foot transonic pressure tunnel calibration. Hampton: National Aeronautics and Space Administration, Langley Research Center, 1994.

Kaupert, Kevin A. A unique light extinction calibration technique for particle concentrations in dusty gas flows. [Downsview, Ont.]: University of Toronto, 1992.

C, Smith Steven. Airflow calibration of a bellmouth inlet for measurement of compressor airflow in turbine-powered propulsion simulators. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1985.

Capone, Francis J. The NASA Langley 16-Foot Transonic Tunnel: Historical overview, facility description, calibration, flow characteristics, and test capabilities. Hampton, Va: Langley Research Center, 1995.

Luo, Qiang Charles. Calibration and application of LUOM in Southern Guam watersheds with and without flow data. Agana, Guam]: Water and Environmental Research Institute of the Western Pacific (WERI), University of Guam, 2010.

Park, Brian. Development and evaluation of a calibration and validation procedure for microscopic simulation models. Charlottesville, Va: Virginia Transportation Research Council, 2004.

Mahon, Gary L. Development, calibration, and testing of ground-water flow models for the Mississippi River valley alluvial aquifer in eastern Arkansas using one-square-mile cells. Little Rock, Ark: U.S. Dept. of the Interior, U.S. Geological Survey, 1993.

Mahon, Gary L. Development, calibration, and testing of ground-water flow models for the Mississippi River valley alluvial aquifer in eastern Arkansas using one-square-mile cells. Little Rock, Ark: U.S. Dept. of the Interior, U.S. Geological Survey, 1993.

Harte, Philip T. Construction and calibration of numerical ground-water-flow models of the western half of the Milford-Souhegan glacial-drift aquifer, Milford, New Hampshire. Pembroke, N.H: U.S. Dept. of the Interior, U.S. Geological Survey, 1999.

Walter, Donald A. Use of inverse-modeling methods to improve ground-water-model calibration and evaluate model-prediction uncertainty, Camp Edwards, Cape Cod, Massachusetts. Reston, Va: U.S. Geological Survey, 2008.

Walter, Donald A. Use of inverse-modeling methods to improve ground-water-model calibration and evaluate model-prediction uncertainty, Camp Edwards, Cape Cod, Massachusetts. Reston, Va: U.S. Geological Survey, 2008.

Walter, Donald A. Use of inverse-modeling methods to improve ground-water-model calibration and evaluate model-prediction uncertainty, Camp Edwards, Cape Cod, Massachusetts. Reston, Va: U.S. Geological Survey, 2008.

Clemmens, Albert J. FLUME: A computer model for estimating flow through long-throated measuring flumes. [Beltsville, Md.]: U.S. Dept. of Agriculture, Agricultural Research Service, 1987.

Putnam, Larry D. Hydrogeology of the Split Rock Creek aquifer with emphasis on calibration of a numerical flow model, southeast Minnehaha County, South Dakota. Rapid City, S.D: U.S. Dept. of the Interior, U.S. Geological Survey, 1998.

Peter, Martin. Development and calibration of a two-dimensional digital model for the analysis of the ground-water flow system in the San Antonio Creek Valley, Santa Barbara County, California. Sacramento, Calif: U.S. Dept. of the Interior, Geological Survey, 1985.

Masterson, John P. Use of particle tracking to improve numerical model calibration and to analyze ground-water flow and contaminant migration, Massachusetts Military Reservation, western Cape Cod, Massachusetts. Washington, DC: U.S. G.P.O., 1996.

ModelCARE'96 (1996 Golden, Colo.). Calibration and reliability in groundwater modelling: Proceedings of the ModelCARE'96 conference held in Golden, Colorado, USA from 24 to 26 September 1996. Wallingford: IAHS, 1996.

McKee, Paul W. Development and calibration of a ground-water flow model for the Sparta Aquifer of southeastern Arkansas and north-central Louisiana and simulated response to withdrawals, 1998-2027. Little Rock, Ark: U.S. Geological Survey, 2003.

McKee, Paul W. Development and calibration of a ground-water flow model for the Sparta Aquifer of southeastern Arkansas and north-central Louisiana and simulated response to withdrawals, 1998-2027. Little Rock, Ark: U.S. Geological Survey, 2003.

McKee, Paul W. Development and calibration of a ground-water flow model for the Sparta Aquifer of southeastern Arkansas and north-central Louisiana and simulated response to withdrawals, 1998-2027. Little Rock, Ark: U.S. Geological Survey, 2003.

Norris, J. Michael. Calibration procedure for a daily flow model of small watersheds with snowmelt runoff in the Green River coal region of Colorado. Lakewood, Colo: U.S. Dept. of the Interior, Geological Survey, 1985.

Switzerland), ModelCARE'99 (1999 Zürich. Calibration and reliability in groundwater modelling: Coping with uncertainty ; proceedings of the ModelCare'99 conference held in Zurich, Switzerland, from 20 to 23 September 1999. Wallingford, Oxfordshire: IAHS, 2000.

Landhausser, Andreas. Kalibrierung einer 5-Lochsonde und Erprobung eines Auswerteverfahrens zur Stromungsfeldmessung. Koln: DFVLR, 1986.

Kaupert, Kevin A. A unique light extinction calibration technique for particle concentrations in dusty gas flows. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1993.

Arab, Rupert Fazal. Statistical analysis of hot-wire calibration coefficients for normal and inclined wires in heated turbulent flows. Ottawa: National Library of Canada, 1995.

W, Barrick John D., and Langley Research Center, eds. Calibration of NASA turbulent air motion measurement system. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.

E, Mattingly G., and National Institute of Standards and Technology (U.S.), eds. NIST calibration services for gas flow meters: Piston prover and bell prover gas flow facilities. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

S, Prahst P., and United States. National Aeronautics and Space Administration., eds. Inlet flow test calibration for a small axial compressor facility. [Washington, DC]: National Aeronautics and Space Administration, 1994.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

R, McNew-Cartwright Elizabeth, and Geological Survey (U.S.), eds. Calibration of a ground-water-flow model by regression. Coram, N.Y: U.S. Dept. of the Interior, U.S. Geological Survey, 1996.

S, Prahst P., and United States. National Aeronautics and Space Administration., eds. Inlet flow test calibration for a small axial compressor rig. [Washington, DC]: National Aeronautics and Space Administration, 1995.

T, Kariya Timmy, and Langley Research Center, eds. The design and preliminary calibration of a boundary-layer flow channel. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1988.

Karen, Flack, and Ames Research Center, eds. Performance and test section flow characteristics of the National Full-Scale Aerodynamics Complex 40- by 80-Foot Wind Tunnel. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1989.

Karel, Kovar, International Association of Hydrological Sciences. International Commission on Groundwater., and ModelCARE (1990 : The Hague), eds. Calibration and reliability in groundwater modelling: Proceedingsof the conference held in The Hague, The Netherlands, 3-6 September 1990. Wallingford, Oxfordshire: IAHS Press, 1990.

Overview of the 1989 Wind Tunnel Calibration Workshop. Washington, DC: National Aeronautics and Space Administration, Scientific and Technical Information Program, 1993.

1952-, Harris Charles D., Reagon Patricia G, and Langley Research Center, eds. The NASA Langley 8-foot transonic pressure tunnel calibration. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

1952-, Harris Charles D., Reagon Patricia G, and Langley Research Center, eds. The NASA Langley 8-foot transonic pressure tunnel calibration. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

1952-, Harris Charles D., Reagon Patricia G, and Langley Research Center, eds. The NASA Langley 8-foot transonic pressure tunnel calibration. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

High accuracy fuel flowmeter: Final report, phase IIC and phase III : the mass flowrate calibration of high accuracy fuel flowmeters. Wilmington, MA: AMETEK Aerospace Products, inc., 1992.