Log in

Relevant bibliographies by topics / Flow in tubes

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Flow in tubes'

Author: Grafiati

Published: 4 June 2021

Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Flow in tubes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Flow in tubes"

1

Elad, D., M. Sahar, J. M. Avidor, and S. Einav. "Steady Flow Through Collapsible Tubes: Measurements of Flow and Geometry." Journal of Biomechanical Engineering 114, no. 1 (1992): 84–91. http://dx.doi.org/10.1115/1.2895454.

Full text

Abstract:

Compliant tubes attain a complex three-dimensional geometry when the external pressure exceeds the internal pressure and the tube is partially collapsed. A new technique for remote measurement of dynamic surfaces was applied to classical experiments with collapsible tubes. This work presents measurements of the threedimensional structure of the tube as well as pressure and flow measurements during static loading and during steady-state fluid flow. Results are shown for two tubes of the same material and internal diameter but with different wall thicknesses. The measured tube laws compare well

APA, Harvard, Vancouver, ISO, and other styles

2

Lin, Tsun-Kuo, and Ming-Huei Yu. "Simulation of Flow Induced Vibrations of Tube Bundle in Cross Flow." Journal of Mechanics 17, no. 3 (2001): 139–47. http://dx.doi.org/10.1017/s1727719100004500.

Full text

Abstract:

ABSTRACTThe flow-induced vibration of tubes in a rotated triangular array subject to cross flow is simulated numerically. In the study, the flow field around the tube bundle is computed by solving the continuity and Navier-Stokes equations with assumption of constant fluid properties, and the kε-model for turbulent Reynolds stress. With the flow field known, the fluid forces on the tube surfaces can be calculated, and then the displacement of each tube due to the fluid force can be evaluated. Iteration is needed to obtain the dynamic response of the tube structure in the fluid flow. The parame

APA, Harvard, Vancouver, ISO, and other styles

3

Kawamura, K., and A. Yasuo. "Turbulence-Induced Vibration of Tube Bundle in Cross and Parallel Jet Mixed Flow." Journal of Pressure Vessel Technology 111, no. 4 (1989): 352–60. http://dx.doi.org/10.1115/1.3265691.

Full text

Abstract:

In the multi-tube type of heat exchanger, baffle plates are located at appropriate intervals to support the heat transfer tubes. Depending on the baffle plate type employed, the flow field in the tube bundle will consist of a mixture of the cross flow (the fluid flows at right angles to the tube bundle along the baffle plate surfaces) and the parallel jet flow (the fluid streams through channels such as the flow holes of the baffle plates in the form of jets and flows in parallel with the tube bundle). Vibrations induced by the flow can cause fretting wear and fatigue of the heat transfer tube

APA, Harvard, Vancouver, ISO, and other styles

4

HEIL, MATTHIAS. "Stokes flow in collapsible tubes: computation and experiment." Journal of Fluid Mechanics 353 (December 25, 1997): 285–312. http://dx.doi.org/10.1017/s0022112097007490.

Full text

Abstract:

This paper is concerned with the problem of viscous flow in an elastic tube. Elastic tubes collapse (buckle non-axisymmetrically) when the transmural pressure (internal minus external pressure) falls below a critical value. The tube's large deformation during the buckling leads to a strong interaction between the fluid and solid mechanics.In this study, the steady three-dimensional Stokes equations are used to analyse the slow viscous flow in such a tube whose deformation is described by geometrically nonlinear shell theory. Finite element methods are used to solve the large-displacement fluid

APA, Harvard, Vancouver, ISO, and other styles

5

Edwards, D. P., A. Hirsa, and M. K. Jensen. "Turbulent Flow in Longitudinally Finned Tubes." Journal of Fluids Engineering 118, no. 3 (1996): 506–13. http://dx.doi.org/10.1115/1.2817787.

Full text

Abstract:

An experimental investigation of fully developed, steady, turbulent flow in longitudinally finned tubes has been performed. A two-channel, four-beam, laser-Doppler velocimeter was used to measure velocity profiles and turbulent statistics of air flow seeded with titanium dioxide particles. Mean velocities in axial, radial, and circumferential directions were measured over the tube cross sections and pressure drop in the tubes was measured at six stations along the test section length in order to calculate the fully developed friction factor. Four experimental tube geometries were studied: one

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, C. Y., and J. B. Bassingthwaighte. "Blood Flow in Small Curved Tubes." Journal of Biomechanical Engineering 125, no. 6 (2003): 910–13. http://dx.doi.org/10.1115/1.1634992.

Full text

Abstract:

Blood flow in small curved tubes is modeled by the two-fluid model where a relatively cell-free fluid layer envelops a fluid core of higher viscosity. The parameters in the model are successfully curve fitted to experimental data for straight tubes. The curved tube equations are then solved by perturbation theory. It was found that curvature in general lowers the tube resistance, but increases the shear stress near the inside wall.

APA, Harvard, Vancouver, ISO, and other styles

7

Gylys, J., M. Jakubcionis, S. Sinkunas, and T. Zdankus. "AVERAGE HEAT TRANSFER OF TUBES IN DOWNWARD FOAM FLOW." Revista de Engenharia Térmica 2, no. 1 (2003): 38. http://dx.doi.org/10.5380/reterm.v2i1.3518.

Full text

Abstract:

The model of heat exchanger was investigated experimentally. This model consists of three vertical lines of horizontal tubes with five tubes in each. Tubes were arranged in a staggered order. Heat transfer of staggered bundle of tubes to downward static stable foam flow was investigated experimentally. Heat transfer dependence on specific gas and liquid velocity was determined. Dependence of volumetric void fraction of foam on heat transfer was investigated also. Heat transfer rate dependence on tube position in the line of tube bundle was investigated experimentally. It was established that h

APA, Harvard, Vancouver, ISO, and other styles

8

Chen, S. S., Y. Cai, and S. Zhu. "Flow-Induced Vibration of Tubes in Cross-Flow." Journal of Offshore Mechanics and Arctic Engineering 118, no. 4 (1996): 253–58. http://dx.doi.org/10.1115/1.2833913.

Full text

Abstract:

This paper presents an unsteady-flow theory for flow-induced vibration of tubes in cross-flow. It includes a general description of motion-dependent fluid forces, characteristics of fluid-force coefficients, and mathematical models. Detailed results are presented for the constrained mode in the lift direction for various tube arrangements.

APA, Harvard, Vancouver, ISO, and other styles

9

Meyers, Johan, and Charles Meneveau. "Flow visualization using momentum and energy transport tubes and applications to turbulent flow in wind farms." Journal of Fluid Mechanics 715 (January 9, 2013): 335–58. http://dx.doi.org/10.1017/jfm.2012.523.

Full text

Abstract:

AbstractAs a generalization of the mass–flux based classical stream tube, the concept of momentum and energy transport tubes is discussed as a flow visualization tool. These transport tubes have the property that no fluxes of momentum or energy exist over their respective tube mantles. As an example application using data from large eddy simulation, such tubes are visualized for the mean-flow structure of turbulent flow in large wind farms, in fully developed wind-turbine-array boundary layers. The three-dimensional organization of energy transport tubes changes considerably when turbine spaci

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Xue Min, Zhou Hang Li, Yu Xin Wu, and Jun Fu Lu. "Effect of Tube Size on Flow Pattern of Air-Water Two-Phase Flow in Horizontal Tubes." Advanced Materials Research 746 (August 2013): 575–80. http://dx.doi.org/10.4028/www.scientific.net/amr.746.575.

Full text

Abstract:

Aiming at the diameter range of boiler water wall tubes in practical engineering application, the air-water two phase flow pattern in horizontal tube was experimentally investigated in tubes with different inner diameters of 20mm and 8 mm under atmosphere condition. The stratified flow, wave flow, plug flow, slug flow, annular flow, bubbly flow and mist flow were observed in the tubes. Most of the experimental points agree well with the Baker flow pattern map when they appear in the map. With the experimental results, the range lines between the flow patterns were suggested for the tube of 20m

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Flow in tubes"

1

Jensen, Oliver Eskild. "Flow in collapsible tubes." Thesis, University of Cambridge, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358668.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Morgan, P. "Unsteady flow in collapsible tubes." Thesis, Imperial College London, 1985. http://hdl.handle.net/10044/1/37791.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ascough, John. "Pulsatile flow in curved elastic tubes." Thesis, Loughborough University, 1996. https://dspace.lboro.ac.uk/2134/32000.

Full text

Abstract:

Wall shear stresses are thought to have an influence on the formation of deposits of blood fats on the linings of the arteries, in atherosclerosis. Measuring velocities close to an artery wall to determine wall shears is difficult in view of the thinness of the boundary layer. Analytical solutions are limited to simple geometries and numerical analyses of three-dimensional, unsteady blood flows are expensive in terms of computational time. In the present study, finite element analyses of blood flow in models representative of the human aorta are based on two-dimensional sections in order to re

APA, Harvard, Vancouver, ISO, and other styles

4

Kroeger, Jens. "Diffusion and flow in growing pollen tubes." Thesis, McGill University, 2009. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=66841.

Full text

Abstract:

The growth of walled cells is due to the cooperation of physical and chemical mechanisms leading to the controlled mechanical deformation of the cells. Plant cells, for example, need to expand the surface area of their cell wall in order to grow in size. This can be done in a uniform manner called diffusive growth or through tip-growth. Tip-growth is characterised by a mechanical deformation that is confined to a specific region of the cell wall, namely its tip. Tip-growth generally leads to tubular cell wall shapes and has been observed in plant cells such as pollen tubes an

APA, Harvard, Vancouver, ISO, and other styles

5

Pettersen, Jostein. "Flow vaporization of CO2 in Microchannel Tubes." Doctoral thesis, Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, 2002. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-87.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Chen, Lejun. "Flow patterns in upward two-phase flow in small diameter tubes." Thesis, Brunel University, 2006. http://bura.brunel.ac.uk/handle/2438/5104.

Full text

Abstract:

Two-phase flow in small tubes and channels is becoming a common phenomenon in industrial processes. However, the study of two-phase flow regimes in small tubes is still at its infancy. The previous studies are reviewed and discussed in the literature section. The problems and inconsistencies encountered in the earlier studies are presented and discussed. The experimental facility is introduced in the chapters that follow. They include a section on the design of the experimental system and the test sections, the selection of the experimental parameters and the introduction of the purposely-deve

APA, Harvard, Vancouver, ISO, and other styles

7

Padmaperuma, Dinnaga P. "Modelling and prediction of flashing flow in short tubes." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-06112009-063446/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Powell, Barry Edward. "Experimental measurements of flow through stenotic collapsible tubes." Thesis, Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/18377.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Glober, S. "Flow and heat transfer inside enhanced performance tubes." Thesis, University of Brighton, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373908.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Crowe, Keith E. (Keith Edmund). "Flow regimes and dryout in horizontal, heated tubes." Thesis, Massachusetts Institute of Technology, 1992. http://hdl.handle.net/1721.1/12854.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Flow in tubes"

1

Cheng, Lu. Turbulent flow in spirally fluted tubes. UMIST, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Finley, P. J. The Preston tube in adiabatic compressible flow. Imperial College of Science, Technology and Medicine, Department of Aeronautics, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Glober, Stefan. Flow and heat transfer inside enhanced performance tubes. S. Glober], 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

The physics of pulsatile flow. AIP Press, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

R, Ulinskas, Katinas V, and Karni J, eds. Fluid dynamics and flow-induced vibrations of tube banks. Hemisphere Pub. Corp., 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Carpenter, Peter W., and Timothy J. Pedley, eds. Flow Past Highly Compliant Boundaries and in Collapsible Tubes. Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-0415-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Siginer, Dennis A. Developments in the Flow of Complex Fluids in Tubes. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-02426-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gungor, Kernal Ersin. A general correlation for flow boiling in tubes and annuli. University of Birmingham, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Plett, E. G. Open ended shock tube flow as a tool to aid development of a two-dimensional compressible nonsteady computer code. AIAA, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Cambier, Jean-Luc. Numerical simulations of unsteady flow in a hypersonic shock tunnel facility. AIAA, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Flow in tubes"

1

Zamir, M. "Steady Flow in Tubes." In The Physics of Pulsatile Flow. Springer New York, 2000. http://dx.doi.org/10.1007/978-1-4612-1282-9_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Yang, and Nam Dinh. "Flow Boiling in Tubes." In Handbook of Thermal Science and Engineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-26695-4_47.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Liu, Yang, and Nam Dinh. "Flow Boiling in Tubes." In Handbook of Thermal Science and Engineering. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-32003-8_47-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zamir, Mair. "Flow in Branching Tubes." In Biological and Medical Physics, Biomedical Engineering. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-24103-6_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hoffmann, Alex C., and Louis E. Stein. "Cyclone Flow Pattern and Pressure Drop." In Gas Cyclones and Swirl Tubes. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-662-07377-3_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Siginer, Dennis A. "Longitudinal Flow Field." In Developments in the Flow of Complex Fluids in Tubes. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02426-4_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Siginer, Dennis A. "Transversal Flow Field." In Developments in the Flow of Complex Fluids in Tubes. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02426-4_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Koehler, W., and W. Kastner. "Post-CHF Heat Transfer in Boiler Tubes." In Two-Phase Flow Heat Exchangers. Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2790-2_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Koehler, W., and W. Kastner. "Two-Phase Pressure Drop in Boiler Tubes." In Two-Phase Flow Heat Exchangers. Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2790-2_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Thome, John R. "Application of Enhanced Boiling Tubes to Reboilers." In Two-Phase Flow Heat Exchangers. Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2790-2_25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Flow in tubes"

1

Cain, Alan, Edward Kerschen, Julianna Tassy, and Ganesh Raman. "Simulation of Powered Resonance Tubes: Helmholtz Resonator Geometries." In 2nd AIAA Flow Control Conference. American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-2690.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kerschen, Edward, Alan Cain, and Ganesh Raman. "Analytical Modeling of Helmholtz Resonator Based Powered Resonance Tubes." In 2nd AIAA Flow Control Conference. American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-2691.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Chen, Q., and R. S. Amano. "A Study of Flows Over Microgrooves for Different Flow Pattern." In ASME 4th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2006. http://dx.doi.org/10.1115/icnmm2006-96226.

Full text

Abstract:

During condensation of R134a the flow patterns inside two three-dimensional (3-D) micro-fin tubes with different fin geometries were investigated. The flow patterns and their transitions were visibly observed and recorded. The experimental findings revealed the following results: a comparison of the condensation flow patterns in the 3-D micro-fin tubes with those in smooth tubes revealed no qualitative differences. The mist flow and the mist-annular flow that appeared in the smooth tube entrance region were not observed in 3-D micro-fin tubes. In the maps of the Mandhane flow regime and the So

APA, Harvard, Vancouver, ISO, and other styles

4

Manabe, Jun. "Flow Instability Inside Heat Transfer Tubes of MSR." In 2012 20th International Conference on Nuclear Engineering and the ASME 2012 Power Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/icone20-power2012-54125.

Full text

Abstract:

Moisture separator reheater for nuclear steam turbine system of light water reactor, a combined equipment of mist separator and in-tube side condensing multi-tube type heat exchanger, has an inherent issue of flow instability inside the tubes. The issue causes the temperature oscillation and possible thermal fatigue at tube to tube-sheet welding of the tube outlet end. Construction of its heat transfer is that heating main steam supplied by NSSS inside the tubes transfers its latent heat by condensing to the colder high pressure turbine exhaust steam cooling outside of the tubes. The condensed

APA, Harvard, Vancouver, ISO, and other styles

5

Ishikawa, Masa-aki, Hiroshi Oiwa, Kosuke Sakai, et al. "Flow Structure and Pressure Loss of Two-Phase Flow in Helically Coiled Tubes." In ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/fedsm2003-45376.

Full text

Abstract:

In the steam generator of the prototype FBR (Fast Breeder Reactor) in Japan, heat exchange tubes of helical coil type are utilized. The gas-liquid two-phase flows in the helical coil tube have different characteristic from straight tubes due to the effects of centrifugal acceleration in the curved tubes. In our study, the interfacial structure of the gas-liquid two-phase flows in the helical coil tube is visualized to provide the flow pattern map. Simultaneously, the pressure loss and its local fluctuation are measured in order to investigate the dynamic characteristics of the two-phase flow a

APA, Harvard, Vancouver, ISO, and other styles

6

Andreini, P. A., P. De Greeff, L. Galbiati, A. Kuhlwetter, and G. Sotgia. "OIL-WATER FLOW IN SMALL DIAMETER TUBES." In International Symposium on Liquid-Liquid Two Phase Flow and Transport Phenomena. Begellhouse, 1997. http://dx.doi.org/10.1615/ichmt.1997.intsymliqtwophaseflowtranspphen.50.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Nivesrangsan, Pornchai, Somsak Pethkool, Kwanchai Nanan, Monsak Pimsarn, and Smith Eiamsa-ard. "Thermal Performance Assessment of Turbulent Flow Through Dimpled Tubes." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22503.

Full text

Abstract:

This paper presents the heat transfer augmentation and friction factor characteristics by means of dimpled tubes. The experiments were conducted using the dimpled tubes with two different dimpled-surface patterns including aligned arrangement (A-A) and staggered arrangement (S-A), each with two pitch ratios (PR = p/Di = 0.6 and 1.0), for Reynolds number ranging from 9800 to 67,000. The experimental results achieved from the dimpled tubes are compared with those obtained from the plain tube. Evidently, the dimpled tubes with both arrangements offer higher heat transfer rates compared to the pla

APA, Harvard, Vancouver, ISO, and other styles

8

Belfroid, Stefan P. C., Donald P. Shatto, and Rene M. C. A. M. Peters. "Flow Induced Pulsations Caused by Corrugated Tubes." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26503.

Full text

Abstract:

Corrugated tubes can produce a tonal noise when used for gas transport, for instance in the case of flexible risers. The whistling sound is generated by shear layer instability due to the boundary layer separation at each corrugation. This whistling is examined by investigating the frequency, amplitude and onset of the pulsations generated by 2" artificially corrugated tubes and cable feeds. Special attention is given to the influence of the geometry of the corrugations and to the influence of the boundary conditions of the tubes. Two distinct modes are measured. One high mode with a typical S

APA, Harvard, Vancouver, ISO, and other styles

9

Manabe, Jun. "Flow Instability Inside Heat Transfer Tubes of Moisture Separator Reheater." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30297.

Full text

Abstract:

This paper presents some consideration and analysis on the flow instability inside the tubes of the moisture separator reheater (MSR), which is a combined equipment of the mist separator and the in-tube side condensation multi-tube type heat exchanger for superheating the exhaust from the high pressure turbine to the low pressure turbine. The condensed water in the tubes will be exhausted by the friction of excess steam vented through the tubes, and with such design, the flow in the tubes will be in an annular gas-liquid two-phase regime, ensuring the steady drainage of condensed water without

APA, Harvard, Vancouver, ISO, and other styles

10

Nouri-Borujerdi, A., and P. Javidmand. "Critical Mass Flow Rate Through Capillary Tubes." In ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-30250.

Full text

Abstract:

This paper presented a numerical study that predicts critical mass flow rate, pressure, vapor quality, and void fraction along a very long tube with small diameter or capillary tub under critical condition by the drift flux model. Capillary tubes are simple expansion devices and are necessary to design and optimization of refrigeration systems. Using dimensional analysis by Buckingham’s π theory, some generalized correlations are proposed for prediction of flow parameters as functions of flow properties and tube sizes under various critical conditions. This study is performed under the inlet p

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Flow in tubes"

1

Schraml, Stephen J., and Richard J. Pearson. Characterization of Flow Distribution in Axisymmetric Shock Tubes. Defense Technical Information Center, 1992. http://dx.doi.org/10.21236/ada251095.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

WOLFE, WALTER P., JAMES H. STRICKLAND, GREGORY F. HOMICZ, and ALBERT A. GOSSLER. VFLOW2D - A Vorte-Based Code for Computing Flow Over Elastically Supported Tubes and Tube Arrays. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/766239.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bimal K. Kad. Cross-Roll Flow Forming of ODS Alloy Heat Exchanger Tubes For Hoop Creep Enhancement. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/894894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bimal K. Kad. Cross-Roll Flow Forming of ODS Alloy Heat Exchanger Tubes For Hoop Creep Enhancement. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/888920.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bimal K. Kad. Cross-Roll Flow Forming of ODS Alloy Heat Exchanger Tubes for Hoop Creep Enhancement. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/881909.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bimal K. Kad. Cross-Roll Flow Forming of ODS Alloy Heat Exchanger Tubes For Hoop Creep Enhancement. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/881980.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bimal K. Kad. CROSS-ROLL FLOW FORMING OF ODS ALLOY HEAT EXCHANGER TUBES FOR HOOP CREEP ENHANCEMENT. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/823796.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Bimal K. Kad. CROSS-ROLL FLOW FORMING OF ODS ALLOY HEAT EXCHANGER TUBES FOR HOOP CREEP ENHANCEMENT. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/828172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bimal Kad. Cross-Roll Flow Forming of ODS Alloy Heat Exchanger Tubes For Hoop Creep Enhancement. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/962926.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bimal K. Kad. CROSS-ROLL FLOW FORMING OF ODS ALLOY HEAT EXCHANGER TUBES FOR HOOP CREEP ENHANCEMENT. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/837874.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!