To see the other types of publications on this topic, follow the link: Fluidization air.

Journal articles on the topic 'Fluidization air'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Fluidization air.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Mohammad Azrul Rizal Alias, Mohd Al Hafiz Mohd Nawi, Mohd Sharizan Md Sarip, Md Tasyrif Abdul Rahman, Muhamad Silmie Mohamad Shabri, and Raja Muhammad Zulkifli Raja Ibrahim. "Twist Blade Distributor in Fluidization Systems: Part 2 – The Air Flow Characteristics." Journal of Advanced Research in Applied Sciences and Engineering Technology 29, no. 2 (2023): 12–24. http://dx.doi.org/10.37934/araset.29.2.1224.

Full text
Abstract:
This study examines the findings of numerical analysis studies that were conducted to determine how the arrangement of the blade distributors in a fluidization system affects the distribution of air flow distribution. In contrast to the conventional methods, which give the particle a swirling motion, the current fluidization systems produce a circular movement of a beds. Therefore, the influence of twist angle blade (60° and 100°) was investigated through to the horizontal inclination angle (15°) and radial inclination angle (10° and 12°) blade distributors. In a fluidization systems, the simu
APA, Harvard, Vancouver, ISO, and other styles
2

Korotkiy, Igor, Aleksandr Rasshchepkin, Elena Korotkaya, and Lyudmila Lifenceva. "OPTIMIZATION OF FLUIDIZATION MODE ENERGY COSTS WHEN FREEZING SERVICEBERRY FRUITS." Bulletin of KSAU, no. 11 (March 5, 2024): 183–92. https://doi.org/10.36718/1819-4036-2024-11-183-192.

Full text
Abstract:
ve of the study is to optimize the energy costs of the fluidization mode when freezing serviceberry. Tasks: to create a methodology for calculating the energy costs required to organize the fruit fluidization mode in an air fluidization apparatus; to determine the critical fluidization rates when freezing serviceberry at different temperature modes of low-temperature processing; to determine the operating range of fluidization rates in a quick-freezing apparatus, ensuring the formation of a pseudo-fluidized layer and eliminating the carryover of fruits from the working area when freezing servi
APA, Harvard, Vancouver, ISO, and other styles
3

Ogata, Koichiro, Tsutomu Harada, Hideo Kawahara, et al. "Characteristics of Vibrating Fluidization and Transportation for Al2O3 Powder." Materials 15, no. 6 (2022): 2191. http://dx.doi.org/10.3390/ma15062191.

Full text
Abstract:
This study focused on the vibrating fluidized-bed-type powder feeder used in HVAF thermal spraying equipment. This feeder has been used in thermal spraying equipment and industrial applications. However, particulate materials’ flow mechanism and stable transport characteristics have not been fully understood. This study experimentally investigated the fluidization characteristics, powder dispersion state, and powder transportation characteristics of Al2O3 particles during vertical vibration fluidization. The material used was Al2O3 particles of 2.9 μm and 3808 kg/m3, classified as the group C
APA, Harvard, Vancouver, ISO, and other styles
4

Egorov, A. G., D. M. Gagloev, and A. S. Tizilov. "Influence of the combustion process in the flow of fluidization fuel." Journal of Dynamics and Vibroacoustics 2, no. 2 (2015): 34–41. http://dx.doi.org/10.18287/2409-4579-2015-2-2-34-41.

Full text
Abstract:
Developed method of controlling the combustion process in the flow of fluidization fuel based on the injection of non-stationary jets of air into the mixing layer of the main flow to the recirculation zone. It is shown that by varying the frequency and the rate of injection of pulsating jets of air, you can control the characteristics of the combustion fuel in a stream of fluidization.
APA, Harvard, Vancouver, ISO, and other styles
5

Mi, Tie, and Xin Ming Yu. "Study on Fluidization Characteristics of Chinese Herbal Medicine Waste in a Fluidized Bed Reactor." Applied Mechanics and Materials 138-139 (November 2011): 952–57. http://dx.doi.org/10.4028/www.scientific.net/amm.138-139.952.

Full text
Abstract:
Large amounts of Chinese herbal medicine wastes (CHMW) are produced in the process of processing and manufacturing traditional Chinese crude medicines. For CHMW, gasification in fluidized bed is a promising option. But, it is the difficult to fluidize CHMW particles alone in fluidized bed gasifier, especially for various size and shape of CHMW particles. It is very common to fluidize these kinds of biomass particles with sand, gives better defined fluidization behavior and a more reliable scale-up. However, not much is known about fluidization behavior of CHMW particles in fluidized bed. There
APA, Harvard, Vancouver, ISO, and other styles
6

Jiang, Hongming, and R. Vance Morey. "Air-gasification of corncobs at fluidization." Biomass and Bioenergy 3, no. 2 (1992): 87–92. http://dx.doi.org/10.1016/0961-9534(92)90045-r.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Metzner, Willian Velloso, and Gustavo Cesar Dacanal. "Monitoring Agitation Intensity in Fluidized Beds Containing Inert Particles via Acoustic Emissions and Neural Networks." Processes 12, no. 12 (2024): 2691. http://dx.doi.org/10.3390/pr12122691.

Full text
Abstract:
This study utilized passive acoustic emissions from a fluidized bed containing spherical inert ABS particles, captured by an external piezoelectric microphone, to monitor fluidization agitation intensity. Acoustic signals were recorded during fluidization profiles achieved under air velocities ranging from 0.5 to 3.0 m/s and during the drying of water or maltodextrin aqueous solution (1:5 w/w) introduced as droplets. Analyzing audio features like waveforms, the Discrete Fourier Transform (DFT), and Mel Frequency Cepstral Coefficients (MFCCs) revealed changes corresponding to the agitation inte
APA, Harvard, Vancouver, ISO, and other styles
8

Thatchapol Chungcharoen, Warunee Limmun, and Sansanee Sansiribhan. "Effects of Coffee Form and Distributor Hole Angle on The Fluidization Behavior and Specific Energy Consumption in The Fluidized Bed Machine." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 84, no. 2 (2021): 152–58. http://dx.doi.org/10.37934/arfmts.84.2.152158.

Full text
Abstract:
The fluidized bed technique was applied to use with the Robusta coffee in this research. fluidization behavior and specific energy consumption were investigated under various coffee forms and distributor hole angles. Moreover, the minimum fluidization velocity (Vmf) was also determined. Experiments are carried out in a sample bed height of 5 cm with ambience air. In this study, two coffee forms (Ripe coffee cherries; RCC and parchment coffee; PC) and three distributor hole angles (45º, 60º and 90º) are examined. The experimental result shown that the fluidization behavior is influenced by coff
APA, Harvard, Vancouver, ISO, and other styles
9

Yohana, Eflita, Afif Prasetya Nugraha, Ade Eva Diana, Ilham Mahawan, and Sri Nugroho. "CFD Analysis to Calculate the Optimal Air Velocity in Drying Green Tea Process Using Fluidized Bed Dryer." E3S Web of Conferences 31 (2018): 01009. http://dx.doi.org/10.1051/e3sconf/20183101009.

Full text
Abstract:
Tea processing is basically distinguished into three types which black tea, green tea, and oolong tea. Green tea is processed by heating and drying the leaves. Green tea factories in Indonesia are generally using the process of drying by panning the leaves. It is more recommended to use the fluidization process to speed up the drying process as the quality of the tea can be maintained. Bubbling fluidization is expected to occur in this research. It is a process of bubbles are formed in the fluidization. The effectiveness of the drying process in a fluidized bed dryer machine needs to be improv
APA, Harvard, Vancouver, ISO, and other styles
10

Raveendran, K., W. A. R. Jayarathna, A. D. U. S. Amarasinghe, and W. S. Botheju. "Modeling the effect of shrinkage on fluidized bed drying of orthodox broken type tea." Chemical Industry and Chemical Engineering Quarterly 25, no. 3 (2019): 299–307. http://dx.doi.org/10.2298/ciceq180821008r.

Full text
Abstract:
Fermented tea particles (dhool) are a polydisperse system subject to shrinkage during fluidized bed drying, which is an important process in the production of orthodox broken type tea. The effect of shrinkage on the physical properties and the minimum fluidization velocity were studied. Five different moisture contents of dhool particles were chosen in the range of 3-106 mass% (dry basis) and the changes in particle diameters and particle densities were measured. For each of the moisture contents, the minimum fluidization velocity was found for three different bed loadings using ambient air at
APA, Harvard, Vancouver, ISO, and other styles
11

Shukrie, A., S. Anuar, and A. N. Oumer. "Air Distributor Designs for Fluidized Bed Combustors: A Review." Engineering, Technology & Applied Science Research 6, no. 3 (2016): 1029–34. http://dx.doi.org/10.48084/etasr.688.

Full text
Abstract:
Fluidized bed combustion (FBC) has been recognized as one of the suitable technologies for converting a wide variety of biomass fuels into energy. One of the key factors affecting the successful operation of fluidized bed combustion is its distributor plate design. Therefore, the main purpose of this article is to provide a critical overview of the published studies that are relevant to the characteristics of different fluidized bed air distributor designs. The review of available works display that the type of distributor design significantly affects the operation of the fluidized bed i.e., p
APA, Harvard, Vancouver, ISO, and other styles
12

Shukrie, A., S. Anuar, and A. N. Oumer. "Air Distributor Designs for Fluidized Bed Combustors: A Review." Engineering, Technology & Applied Science Research 6, no. 3 (2016): 1029–34. https://doi.org/10.5281/zenodo.55390.

Full text
Abstract:
Fluidized bed combustion (FBC) has been recognized as one of the suitable technologies for converting a wide variety of biomass fuels into energy. One of the key factors affecting the successful operation of fluidized bed combustion is its distributor plate design. Therefore, the main purpose of this article is to provide a critical overview of the published studies that are relevant to the characteristics of different fluidized bed air distributor designs. The review of available works display that the type of distributor design significantly affects the operation of the fluidized bed i.e., p
APA, Harvard, Vancouver, ISO, and other styles
13

Hussain, Ahmad, Faraz Junejo, Muhammad Nauman Qureshi, and Afzal Haque. "Hydrodynamic and combustion behavior of low grade coals in the riser of a circulating fluidized bed combustor." NUST Journal of Engineering Sciences 11, no. 1 (2019): 1–11. http://dx.doi.org/10.24949/njes.v11i1.436.

Full text
Abstract:
This study is conducted for understanding the fluidization behavior in a CFB combustor for low ranked coals. A lab-scale cold CFB test rig was built at the NFCIET Multan for understanding the fluidization behaviour. Influence of fluidizing air on the fluidization behavior was observed. It was found that voidage along the riser height is affected by riser geometry. The combustion behavior of low grade coals from Thar coal was also explored in a CFB Combustor. The influence of the fluidizing air on the combustion erformance was examined and their effect on emissions was established. The temperat
APA, Harvard, Vancouver, ISO, and other styles
14

Badot, R., T. Coulom, N. de Longeaux, M. Badard, and J. Sibony. "A fluidized-bed reactor: the biolift process." Water Science and Technology 29, no. 10-11 (1994): 329–38. http://dx.doi.org/10.2166/wst.1994.0776.

Full text
Abstract:
Biological reactors using a culture fixed on a fluidized bed are suitable for many applications in waste water treatment. A large number of studies have been carried out at the pilot-plant scale but none exists at the industrial scale for municipal waste water treatment. Examples are: - Dorr Oliver (Sutton + Mishra) (1) - The Biolex process developed by EBARA (2) - The reactor described by Heijnen (Holland) (3) In the latter two processes, fluidization and aeration are provided by an air-lift system inside the reactor. This article describes the Biolift process whose original feature is that t
APA, Harvard, Vancouver, ISO, and other styles
15

Góral, Dariusz, Tomasz Guz, and Urszula Pankiewicz. "Minimum Velocity of Impingement Fluidization for Parachute-Shaped Vegetables." Sustainability 14, no. 7 (2022): 4257. http://dx.doi.org/10.3390/su14074257.

Full text
Abstract:
Accurate calculation of the minimum fluidization velocity makes it possible to reduce raw material losses due to the use of excessively high or excessively low air velocities. This is particularly true for impingement fluidization, which is little studied, especially when treating parachute-shaped raw material. This paper focused on determining the drag coefficient for cauliflower florets, mushrooms, and broccoli. Analysis of the critical particle lift velocity showed that the lowest value of the drag coefficient was found for mushrooms (0.9). The parachute-shaped vegetables analyzed had a lar
APA, Harvard, Vancouver, ISO, and other styles
16

Chalavadi, Ganesh, Ranjeet Kumar Singh, and Avimanyu Das. "Processing of coal fines using air fluidization in an air table." International Journal of Mineral Processing 149 (April 2016): 9–17. http://dx.doi.org/10.1016/j.minpro.2016.02.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Khanali, Majid, and Shahin Rafiee. "Investigation of Hydrodynamics, Kinetics, Energetic and Exergetic Aspects of Fluidized Bed Drying of Rough Rice." International Journal of Food Engineering 10, no. 1 (2014): 39–50. http://dx.doi.org/10.1515/ijfe-2012-0116.

Full text
Abstract:
Abstract The hydrodynamics, kinetics as well as energy and exergy analyses of fluidized bed drying of rough rice under various experimental conditions were investigated. Drying experiments were conducted at drying air temperatures of 55, 60, and 70°C, superficial fluidization velocities of 2.3, 2.5, and 2.8 m/s, solid holdups of 0.66 and 1.32 kg, and rough rice initial moisture content of 0.25 d.b. Various popular drying models were used to fit the drying data. It was found that the fluidized bed hydrodynamics of the rough rice was uniform and stable. The drying rate was found to increase with
APA, Harvard, Vancouver, ISO, and other styles
18

Faizal, Mohd, Md Seri Suzairin, Mohd Al-Hafiz, and Vijay Raj Raghavan. "CFD Studies on Velocity Distribution of Air in a Swirling Fluidized Bed." Advanced Materials Research 468-471 (February 2012): 25–29. http://dx.doi.org/10.4028/www.scientific.net/amr.468-471.25.

Full text
Abstract:
This paper presents computational fluid dynamics (CFD) studies to characterize air velocity distribution for various bed configurations in a swirling fluidized bed (SFB). Unlike conventional fluidized beds, a SFB provides radial mixing which is desirable is fluidization. Three velocities components were observed, the tangential velocity, radial velocity and axial velocity. These velocities were created as a result of using annular blade type distributor which mimics the turbine blades. In actual industrial applications, the axial velocity will create fluidization while the tangential velocity
APA, Harvard, Vancouver, ISO, and other styles
19

Johari, Anwar, Tuan Amran Tuan Abdullah, Mimi Haryani Hassim, et al. "Effect of Fluidization Number on the Combustion of Empty Fruit Bunch in a Fluidized Bed." Advanced Materials Research 1125 (October 2015): 301–5. http://dx.doi.org/10.4028/www.scientific.net/amr.1125.301.

Full text
Abstract:
The effect of fluidization number on the sustainability of fluidized bed combustion of empty fruit bunch was investigated. Proximate and ultimate analyses were conducted to determine the physical and chemical properties of empty fruit bunch. Sand mean particle size was determined at 0.34 mm and the sand bed height was set at 1 Dcwhich is equivalent to the diameter of the reactor. Combustion study was carried out in a circular reactor of 0.21 m diameter and operated at stoichiometric condition (Air Factor = 1). The range of fluidization numbers under investigation was from 3 to 8 Umf. The fluid
APA, Harvard, Vancouver, ISO, and other styles
20

Darweesh, Ahmed Hammood, and Musa Mustafa Weis. "The impact of particle size in fluidized bed on heat transfer behavior: A review." Advances in Mechanical and Materials Engineering 41 (2024): 39–46. http://dx.doi.org/10.7862/rm.2024.4.

Full text
Abstract:
This review paper explores the significance of fluidized bed heat exchangers in various industrial applications. By delving into the operation of fluidized beds as multiphase flow systems, the aim is to enhance their capabilities and efficiency. Key parameters such as minimum fluidization velocity and local gas holdup are crucial for characterizing the hydrodynamic behavior of materials within fluidized beds. Fluidization, achieved by passing atmospheric air through particulate solids, imparts fluid-like properties to the bed. Fluidized beds serve as reactors where this phenomenon takes place,
APA, Harvard, Vancouver, ISO, and other styles
21

Bartocci, Pietro, Alberto Abad, Aldo Bischi, et al. "Dimensioning Air Reactor and Fuel Reactor of a Pressurized Chemical Looping Combustor to Be Coupled to a Gas Turbine: Part 1, the Air Reactor." Energies 16, no. 5 (2023): 2102. http://dx.doi.org/10.3390/en16052102.

Full text
Abstract:
This paper provides a simple methodology for the design of the air reactor of a chemical looping combustor to optimize its characteristics when it is employed connected to a turbo expander to produce power. The design process, given a certain objective (e.g., electric power) defines the reactor specifics, namely height and diameter, taking into account the following aspects: solids inventory of the air reactor; gas velocity; air reactor transport disengaging height (TDH); solids concentration profile along the reactor height, dense bed height; freeboard height; pressure drop depending on air r
APA, Harvard, Vancouver, ISO, and other styles
22

Renda, Simona, Javier Lasobras, Jaime Soler, Javier Herguido, and Miguel Menéndez. "Dependence of the Fluidizing Condition on Operating Parameters for Sorption-Enhanced Methanol Synthesis Catalyst and Adsorbent." Catalysts 14, no. 7 (2024): 432. http://dx.doi.org/10.3390/catal14070432.

Full text
Abstract:
The fluidization of two different solids was investigated by varying the temperature and pressure conditions and the fluidizing gas. The solids are a novel catalyst and a water sorbent that could be used to perform sorption-enhanced methanol synthesis; the operating conditions were selected accordingly to this process. The aim of this investigation was to find an expression for predicting the minimum fluidization conditions of a methanol synthesis catalyst and an adsorbent in the presence of their process stream and operating conditions. The findings of this study highlighted how umf (STP) dec
APA, Harvard, Vancouver, ISO, and other styles
23

Srisang, Naruebodee, Somkiat Prachayawarakorn, Warunee Varanyanond, and Somchart Soponronnarit. "Germinated Brown Rice Drying by Hot Air Fluidization Technique." Drying Technology 29, no. 1 (2010): 55–63. http://dx.doi.org/10.1080/07373937.2010.482691.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Muhamad Silmie Mohamad Shabri, Mohd Al Hafiz Mohd Nawi, Mohd Shahir Kasim, et al. "Multi-Stage Swirling Fluidized Bed: Part 2 - The Velocity Distribution." Advanced Research in Applied Sciences and Engineering Technology 30, no. 1 (2023): 76–89. http://dx.doi.org/10.37934/araset.30.1.7689.

Full text
Abstract:
This task involved numerical analysis study to investigate the air flow distribution affected by blade distributor arrangement of Multi-Stage Swirling Fluidized Bed (SFB). The current systems is in difference with conventional fluidization systems where the current systems will impart swirling motion to the particle. This study focused on the velocity distribution on blade distributor whereby the influence of blades number (30, 45, and 60) via horizontal inclination angle (10°, 12°, and 15) through multi-stage distributor arrangements, therefore a separate velocity component would be obtained.
APA, Harvard, Vancouver, ISO, and other styles
25

Mele, Jernej, and Andrej Senegacnik. "Design of a Fast Internal Circulating Fluidized-Bed Gasifier with a conical bed angle." Thermal Science 23, no. 1 (2019): 33–45. http://dx.doi.org/10.2298/tsci161129171m.

Full text
Abstract:
The main purpose of a fast internal circulating fluidized bed gasifier is the steam reforming of solid organic matter, like biomass, to a nearly nitrogen-free syngas. The calorific value of this syngas is approximately three times higher than the gas from common air-driven gasifiers. This article deals with a study of the particle dynamics in a 1 MWt fast internal circulating fluidized bed plant and focuses on the design of the gasification reactor?s geometry. Superheated steam is used for the fluidization and gasification in the reactor. The gasification of solid fuels causes an increase in t
APA, Harvard, Vancouver, ISO, and other styles
26

Skopec, Pavel, Jan Hrdlička, Jan Opatřil, and Jiří Štefanica. "NOx EMISSIONS FROM BUBBLING FLUIDIZED BED COMBUSTION OF LIGNITE COAL." Acta Polytechnica 55, no. 4 (2015): 275. http://dx.doi.org/10.14311/ap.2015.55.0275.

Full text
Abstract:
This paper presents experimental results of NO<sub>x</sub> emission measurements for combustion of two kinds of coal in a bubbling fluidized bed combustor. The tested fuels were Czech brown coal (CBC) and German young brown coal (GYC). These fuels have different nitrogen contents. The experiments were performed in the pilot scale BFB experimental unit with power output of 500 kW. The influence of several parameters on NO<sub>x</sub> formation are investigated in this paper. The parameters studied here include the effect of the nitrogen content in the fuel, the effect of
APA, Harvard, Vancouver, ISO, and other styles
27

Anweiler, Stanisław, and Maciej Masiukiewicz. "Application of stereology for two-phase flow structure validation in fluidized bed reactors." Thermal Science 20, no. 4 (2016): 1199–208. http://dx.doi.org/10.2298/tsci151126108a.

Full text
Abstract:
Paper describes a novel method for two-phase gas-solid flow structure validation in fluidized bed reactors. Investigation is based on application of stereology techniques. This is an innovative approach in the field of fluidization phenomena research. Study is focused on the analysis of flow structure images, obtained with high-speed visualization of the fluidization process. Fluidization is conducted in transparent narrow channel, where plastic balls are fluidized by air. Applied stereological analysis is grounded on the linear method and on the method of random and directed secants. This ena
APA, Harvard, Vancouver, ISO, and other styles
28

Gueguen, Ronny, Guillaume Sahuquet, Samuel Mer, Adrien Toutant, Françoise Bataille, and Gilles Flamant. "Gas-Solid Flow in a Fluidized-Particle Tubular Solar Receiver: Off-Sun Experimental Flow Regimes Characterization." Energies 14, no. 21 (2021): 7392. http://dx.doi.org/10.3390/en14217392.

Full text
Abstract:
The fluidized particle-in-tube solar receiver concept is promoted as an attractive solution for heating particles at high temperature in the context of the next generation of solar power tower. Similar to most existing central solar receivers, the irradiated part of the system, the absorber, is composed of tubes in which circulate the fluidized particles. In this concept, the bottom tip of the tubes is immersed in a fluidized bed generated in a vessel named the dispenser. A secondary air injection, called aeration, is added at the bottom of the tube to stabilize the flow. Contrary to risers, t
APA, Harvard, Vancouver, ISO, and other styles
29

Lu, Wang, Pietro Bartocci, Alberto Abad, et al. "Dimensioning Air Reactor and Fuel Reactor of a Pressurized CLC Plant to Be Coupled to a Gas Turbine: Part 2, the Fuel Reactor." Energies 16, no. 9 (2023): 3850. http://dx.doi.org/10.3390/en16093850.

Full text
Abstract:
Bioenergy with Carbon Capture and Storage (BECCS) technologies are fundamental to reach negative CO2 emissions by removing it from the atmosphere and storing it underground. A promising solution to implement BECCS is pressurized Chemical Looping Combustion (CLC), which involves coupling a pressurized CLC reactor system to a turboexpander. The typical configuration chosen is to have an air reactor and a fuel reactor based on coupled circulating fluidized beds. The fluidization regime in both reactors is preferred to be fast fluidization to enhance gas particle contact and solids circulation amo
APA, Harvard, Vancouver, ISO, and other styles
30

Hartman, Miloslav, Zdeněk Beran, Václav Veselý, and Karel Svoboda. "On the Transition from Homogeneous to Bubbling Fluidization." Collection of Czechoslovak Chemical Communications 62, no. 11 (1997): 1698–709. http://dx.doi.org/10.1135/cccc19971698.

Full text
Abstract:
The onset of the aggregative mode of liquid-solid fluidization was explored. The experimental findings were interpreted by means of the dynamic (elastic) wave velocity and the voidage propagation (continuity) wave velocity. For widely different systems, the mapping of regimes has been presented in terms of the Archimedes number, the Froude number and the fluid-solid density ratio. The proposed diagram also depicts the typical Geldart's Group A particles fluidized with air.
APA, Harvard, Vancouver, ISO, and other styles
31

Rosli, Masli, Abdul Abdul Nasir, Mohd Takriff, and Lee Chern. "Simulation of a Fluidized Bed Dryer for the Drying of Sago Waste." Energies 11, no. 9 (2018): 2383. http://dx.doi.org/10.3390/en11092383.

Full text
Abstract:
The large amount of sago waste produced by sago processing industries can cause serious environmental problems. When dried, these residues usually have a high starch content (around 58%) and have many potential applications. In this study, the drying of sago waste using a fluidized bed dryer (FBD), which offers more advantages than other drying methods, is analyzed via computational fluid dynamics (CFD) modeling. A two-dimensional (2D) FBD model is also developed and a mesh independency test is conducted immediately afterwards. A fine mesh is selected for the CFD model and a simulation is cond
APA, Harvard, Vancouver, ISO, and other styles
32

Njuguna, Fredrick, Hiram Ndiritu, Benson Gathitu, Meshack Hawi, and Jotham Munyalo. "Numerical and Experimental Investigation of Fluidized Bed Hydrodynamics at Elevated Temperatures." International Journal of Engineering Research in Africa 64 (June 19, 2023): 51–70. http://dx.doi.org/10.4028/p-a41tm2.

Full text
Abstract:
Fluidized bed gasifiers operate at elevated temperatures, and experimental measurements for the hydrodynamic parameters at high temperatures are difficult and time consuming, making computational fluid dynamics simulation useful for such investigation. In this study, Opensource computational fluid dynamics code, OpenFOAM, was used to investigate temperature effect on the fluidized bed hydrodynamics on a 3D fluidized bed model using Eulerian-Eulerian approach. Silica sand of particle sizes of 500, 335 and 233 m was used as the bed materials under temperatures between 25 and 400 °C. To validate
APA, Harvard, Vancouver, ISO, and other styles
33

Ulitin, Nikolai V., Konstantin A. Tereshchenko, Ilya S. Rodionov, et al. "Numerical Simulation of Hydrodynamics and Heat Transfer in a Reactor with a Fluidized Bed of Catalyst Particles in a Three-Dimensional Formulation." Applied Sciences 14, no. 12 (2024): 5009. http://dx.doi.org/10.3390/app14125009.

Full text
Abstract:
The hydrodynamics and heat transfer in a reactor with a fluidized bed of catalyst particles and an inert material were simulated. The particle bed (the particle density was 2350 kg/m3, and the particle diameter was 1.5 to 4 mm) was located in a distribution device which was a grid of 90 × 90 × 60 mm vertical baffles. The behavior of the liquefying medium (air) was modeled using a realizable k-ε turbulence model. The behavior of particles was modeled using the discrete element method (DEM). In order to reduce the slugging effect, the particles were divided into four separate horizontal layers.
APA, Harvard, Vancouver, ISO, and other styles
34

Alhussaini, Maha MuhyiAlwanA, Hassanain Abbas Hassan, and Nada Sadoon Ahmedzeki. "A Study of Fluctuation and Expansion Ratios for Gas-Solid Fluidized Columns." Journal of Engineering 26, no. 10 (2020): 15–34. http://dx.doi.org/10.31026/j.eng.2020.10.02.

Full text
Abstract:
The fluctuation and expansion ratios have been studied for cylindrical gas-solid fluidized columns by using air as fluidizing medium and Paracetamol as the bed material. The variables were the column diameter (0.0762, 0.15, and 0.18 m), static bed height (0.05, 0.07, and 0.09 m), and air velocity to several times of minimum fluidization velocity. The results showed that both the fluctuation and expansion ratios had a direct relation with air velocity and an inverse one with column diameter and static bed height. A good agreement was between the experimental results and the calculated values by
APA, Harvard, Vancouver, ISO, and other styles
35

Saxena, S. C., and N. S. Rao. "Fluidization characteristics of gas-fluidized beds: Air and glass beads system." Energy 14, no. 12 (1989): 811–26. http://dx.doi.org/10.1016/0360-5442(89)90035-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Wang, Yanan, Zhenfu Luo, Ge Huang, and Baojin Ren. "Effect of agitation on the characteristics of air dense medium fluidization." International Journal of Mining Science and Technology 26, no. 3 (2016): 383–87. http://dx.doi.org/10.1016/j.ijmst.2016.02.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Xiao, Zhi Feng, Xing Bao, and Nan Xing Wu. "Flow Behaviors Study on Superheated Steam Fluidized Bed Drying." Applied Mechanics and Materials 295-298 (February 2013): 467–70. http://dx.doi.org/10.4028/www.scientific.net/amm.295-298.467.

Full text
Abstract:
In the paper, we theoretical analysis the gas-particle flow behaviors in the drying chamber. Then establish a small experimental device and conduct a comparative fluidization experiment with superheated steam and hot air, which the dried rapeseed particles are the experimental material. The critical fluidizing velocity of the rapeseed particles in superheated steam is 1.26 m/s in the experimental condition. The experimental results show that the inlet operating flow velocity of superheated steam fluidized bed drying is greater than which of the traditional hot air fluidized bed dying under the
APA, Harvard, Vancouver, ISO, and other styles
38

Bazaluk, Oleg, Nikolai Struchaiev, Serhii Halko, et al. "Ways to Improve the Efficiency of Devices for Freezing of Small Products." Materials 15, no. 7 (2022): 2412. http://dx.doi.org/10.3390/ma15072412.

Full text
Abstract:
It has been established that one of the main problems in the technology of the production of loose food products is the sticking of vegetables or fruits into one block. It has been proven that one of the steps to solve this problem is the use of berries, fruits, or vegetables during freezing in the form of a fluidized bed in air. However, a significant part of the energy is spent precisely when creating a fluidized bed with the help of fans. By improving the separation efficiency of small products in the freezing process, it would be possible to significantly reduce the energy costs of freezin
APA, Harvard, Vancouver, ISO, and other styles
39

Bala, Vishnu Priya Mukkala *. Gopala Krishna Murthy Talasila and Prameela Rani Avula. "DEVELOPMENT OF FENOFIBRIC ACID DELAYED RELEASE PELLETS: OPTIMIZATION OF PROCESS VARIABLES IN FLUID BED PROCESS." INDO AMERICAN JOURNAL OF PHARMACEUTICAL SCIENCES 05, no. 02 (2018): 1207–18. https://doi.org/10.5281/zenodo.1188922.

Full text
Abstract:
The objective of the present study was to optimize the process of Fenofibric acid delayed release (DR) pellets. Wurster (Bottom spray fluid bed coating) process was employed to develop the Fenofibric acid DR pellets. This study assesses the impact of various process variables on drug layering by using statistical interpretation such as ANOVA. A face centered central composite design (CCD) was employed to study the effect of independent variables (product temperature, atomization air pressure, fluidization air volume and spray rate) on dependent variables (Fines, agglomerates, coating efficienc
APA, Harvard, Vancouver, ISO, and other styles
40

Mladenovic, Milica, Biljana Vucicevic, Ana Marinkovic, and Jovana Buha-Markovic. "Combustion of waste solids in a fluidized bed to generate sustainable energy." Chemical Industry, no. 00 (2024): 8. http://dx.doi.org/10.2298/hemind230606008m.

Full text
Abstract:
Exploring alternative options to address the impending global energy crisis while taking into account environmental concerns and climate change mitigation and addressing the sky-rocketing energy demand has become urgently essential. This need is further highlighted by the significant reliance of the Republic of Serbia on imported energy sources so that the focus of its energy sector strategy is rational use of energy resources, use of renewable energy sources (RES), and waste management with satisfying environmental regulations. The use of low-calorific and waste materials in conjunction with
APA, Harvard, Vancouver, ISO, and other styles
41

Čársky, Milan, Václav Veselý, and Jaroslav Pata. "Particles segregation in fluidized bed binary systems." Collection of Czechoslovak Chemical Communications 51, no. 8 (1986): 1618–27. http://dx.doi.org/10.1135/cccc19861618.

Full text
Abstract:
Binary systems have been divided into six groups according to their minimum fluidization velocities, densities, and size of particles. A concentration profile of fluidized bed has been studied. Experimental results have indicated that interval (45 - 90 sec.) is necessary for concentration profile generation. The profile appears to be uninfluenced by original arrangement of system components, the composition of bulk and grid region being in mutual equilibrium. Superficial velocity strongly affects system equilibrium, especially at higher jetsam concentrations. The best segregation of the system
APA, Harvard, Vancouver, ISO, and other styles
42

Alvarez-Ramirez, J., E. J. Vernon-Carter, and M. Vizcarra-Mendoza. "Separation kinetics of karnal bunt (Tilletia indica) infected wheat (Triticum aestivum) grains in a fluidized bed / Cinética de separación de granos de trigo (Triticum aestivum) infectados con carbon parcial (Tilletia indica) en un lecho fluidificado." Food Science and Technology International 6, no. 2 (2000): 137–43. http://dx.doi.org/10.1177/108201320000600208.

Full text
Abstract:
Infection of breadmaking wheat grains by karnal bunt ( Tilletia indica) is a common disease in north- western Mexican states, causing major economic losses. In this work, the feasibility of separating infected from wholesome wheat grains by using fluidized bed technologies was evaluated. The pro posed separation equipment was of the batch type and fluidization was attained via direct air injec tion into the grain bed. Minimum fluidization rates were determined and effects of infected grain composition in the bed were studied. The experimental results showed that the separation of infected grai
APA, Harvard, Vancouver, ISO, and other styles
43

Kuroda, Masao, Anri Yoshida, Emi Obuchi, Hironoshin Kawabata, and Tadao Arai. "The Fluidization Backwash Method of Filter Beds by Air-water Bubbly Flow." Journal of Water and Environment Technology 18, no. 6 (2020): 349–58. http://dx.doi.org/10.2965/jwet.20-014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Lin, Zhe, Zhenxing Liu, Qi Liu, and Yi Li. "Fluidization characteristics of particles in a groove induced by horizontal air flow." Powder Technology 363 (March 2020): 442–47. http://dx.doi.org/10.1016/j.powtec.2020.01.022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Tabiś, Bolesław, and Dominika Boroń. "A Simple Analytical Method for Determining Basic Hydrodynamic Characteristics of Hybrid Fluidized-Bed Air-Lift Apparatae." Chemical and Process Engineering 38, no. 1 (2017): 121–33. http://dx.doi.org/10.1515/cpe-2017-0010.

Full text
Abstract:
Abstract A simple analytical method for determination of basic hydrodynamic characteristics of hybrid fluidized-bed air-lift devices was presented. These devices consist of two parts: a two-phase air-lift part and a two-phase liquid-solid fluidized-bed part. Forced circulation of fluid in the air-lift part is used for fluidization of solid particles in the fluidized-bed part. According to the opinion given in the literature, if such apparatus is used for aerobic microbiological processes, its advantage is lower shear forces acting on the biofilm immobilized on fine-grained material compared wi
APA, Harvard, Vancouver, ISO, and other styles
46

Jun, Goo Jia, Vijay R. Raghavan, and Chin Yee Sing. "Experimental Study on the Hydrodynamics of Swirling Fluidized Bed." Applied Mechanics and Materials 229-231 (November 2012): 756–60. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.756.

Full text
Abstract:
In recent years, the Swirling Fluidized Bed has been regarded as one of the novel designs in fluidization technology. This new technique features an annular blade distributor which injects the fluidizing gas through a certain inclination, is capable of fluidizing the bed and at the same time causes swirling motion of particles in a circular trajectory. In the present work, the fluidization characteristics and hydrodynamics of a swirling bed are studied using an experimental approach. The behavior of gas-particle interaction in a swirling bed in terms of operation regimes, trend of pressure dro
APA, Harvard, Vancouver, ISO, and other styles
47

Gabhane, Mohitkumar G., Siddharth S. Chakrabarti, and Uday S. Wankhede. "Heat Transfer Analysis in Sound-Enhanced Fluidized Beds Containing Geldart B-C Binary Mixtures." International Journal of Membrane Science and Technology 10, no. 5 (2023): 544–57. http://dx.doi.org/10.15379/ijmst.v10i5.2560.

Full text
Abstract:
An experimental study was carried out on the binary mixing behaviour of Group C with Group B particles as well as the heat transfer behaviour between the bed and submerged heating tube in an acoustic field. The effects of excessive air velocity, sound pressure intensity, and local and averaged heat transfer coefficient were studied for five binary mixes. Different binary mixture fluidization ratios with and without sound aid are used to compare the results. The study also discusses the measurement techniques used, including pressure measurements and the characteristics of the bed solids. Sand
APA, Harvard, Vancouver, ISO, and other styles
48

Duangkhamchan, Wasan, Prarin Chupawa, Naoshi Kondo, and Donludee Jaisut. "Bed Stability Control in Pulsed Fluidized-Bed Agglomeration of Instant Riceberry Powder Using an Image-Processing Technique." Foods 13, no. 12 (2024): 1859. http://dx.doi.org/10.3390/foods13121859.

Full text
Abstract:
The problematic cohesiveness of food powders can commonly be solved using pulsed fluidized-bed agglomeration. However, progressively larger granules may result in unstable fluidization. The aims of this research study were to investigate fluid bed expansion as affected by particle enlargement and to control its stability using an image-processing technique. Instant riceberry powder (IRP) was agglomerated using varied air pulsation frequencies (1, 2.5, and 4 Hz). Bed expansion captured by image processing revealed that expanded bed height decreased with agglomeration time. The results showed an
APA, Harvard, Vancouver, ISO, and other styles
49

Fadhil, M., M. S. Aris, A. H. Abbas, A. B. A. Ibrahim, and N. Aniza. "Minimum Air Fluidization Velocity Study of Specific 2-D Bubbling Fluidized Bed Reactor." Applied Mechanics and Materials 699 (November 2014): 660–65. http://dx.doi.org/10.4028/www.scientific.net/amm.699.660.

Full text
Abstract:
Research on the thermodynamic behavior of sand beds was carried out using a commercial computational dynamic package. The work involved simulating, with the use of the Ergun equation, the air flow through a two-dimensional bubbling bed reactor to predict the bed character whilst considering the major effective function (particle size, particle density, bed height and reactor width). The Minimum Fluidization Velocity (Umf) values were then calculated before the optimum value of Umfneeded to ensure a workable Bubbling Fluidize Bed Combustor (BFBC) system. The effects of using different Umfvalues
APA, Harvard, Vancouver, ISO, and other styles
50

Xu, Xuan, Jiaminag Chen, Zhenfu Luo, et al. "Fluidization Characteristics of Air Dense Medium Agitated Separation Fluidized Bed with Different Distributors." Mineral Processing and Extractive Metallurgy Review 40, no. 5 (2019): 299–306. http://dx.doi.org/10.1080/08827508.2019.1643342.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!