Relevant bibliographies by topics / Full-bridge converter

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Full-bridge converter'

Author: Grafiati
Published: 4 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Full-bridge converter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Full-bridge converter"

1

Kim, Seung-Ryong, Han-Geol Sun, Man-Seung Han, and Sung-Jun Park. "Novel ZVS Switching Method of Full-bridge Converter." Transactions of the Korean Institute of Power Electronics 16, no. 5 (October 20, 2011): 477–83. http://dx.doi.org/10.6113/tkpe.2011.16.5.477.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lin, B. R. "ZVS Converter with Full-Bridge and Half-Bridge Circuits: Analysis, Design and Implementation." Journal of Circuits, Systems and Computers 26, no. 06 (March 5, 2017): 1750090. http://dx.doi.org/10.1142/s0218126617500906.

Full text
Abstract:
A new DC/DC converter integrating a full-bridge circuit and a half-bridge pulse-width circuit is studied to realize the advantages of a wide range of zero-voltage switching (ZVS) and less circulating current loss. A half-bridge converter is connected to power switches on the lagging-leg of full-bridge converter to achieve a wider range of ZVS to overcome the disadvantage of narrow ZVS range in conventional full-bridge converter. The output side of half-bridge circuit is linked to the secondary side of the full-bridge converter to decrease the primary circulating current of the full-bridge converter. Therefore, the conduction losses due to the high circulating current in conventional full-bridge converter are reduced. The theoretical analysis is discussed in detail and the effectiveness of the proposed converter is verified by the experimental verifications with a 1440[Formula: see text]W prototype.
APA, Harvard, Vancouver, ISO, and other styles
3

Tsai, Cheng-Tao, Jye-Chau Su, and Sheng-Yu Tseng. "Comparison between Phase-Shift Full-Bridge Converters with Noncoupled and Coupled Current-Doubler Rectifier." Scientific World Journal 2013 (2013): 1–11. http://dx.doi.org/10.1155/2013/621896.

Full text
Abstract:
This paper presents comparison between phase-shift full-bridge converters with noncoupled and coupled current-doubler rectifier. In high current capability and high step-down voltage conversion, a phase-shift full-bridge converter with a conventional current-doubler rectifier has the common limitations of extremely low duty ratio and high component stresses. To overcome these limitations, a phase-shift full-bridge converter with a noncoupled current-doubler rectifier (NCDR) or a coupled current-doubler rectifier (CCDR) is, respectively, proposed and implemented. In this study, performance analysis and efficiency obtained from a 500 W phase-shift full-bridge converter with two improved current-doubler rectifiers are presented and compared. From their prototypes, experimental results have verified that the phase-shift full-bridge converter with NCDR has optimal duty ratio, lower component stresses, and output current ripple. In component count and efficiency comparison, CCDR has fewer components and higher efficiency at full load condition. For small size and high efficiency requirements, CCDR is relatively suitable for high step-down voltage and high efficiency applications.
APA, Harvard, Vancouver, ISO, and other styles
4

Charin, Chanuri, Nur Fairuz Mohamed Yusof, Mazwin Mazlan, and Noor Haqkimi Adb Rahman. "A Soft Switching Full-Bridge DC-DC Converter with Active Auxiliary Circuit." Applied Mechanics and Materials 793 (September 2015): 232–36. http://dx.doi.org/10.4028/www.scientific.net/amm.793.232.

Full text
Abstract:
DC-DC converters are widely used in many applications such as power supplies, PV system, renewable energy systems and industrial applications. One of the main problems in dc-dc converters is the switching loss which affects efficiency and also the power density of the converter. To alleviate the switching loss problem this paper proposes novel soft switching PWM isolated dc-dc converters topology. The proposed full bridge dc-dc converter with active auxiliary circuit is designed and tested with full-bridge rectifier diode. The proposed converter is designed and evaluated in term of soft switching. In the proposed topology, the soft switching operations are achieved by charging and discharging process of the capacitor and additional switches. In the proposed topology, all the power switches operate under soft-switching conditions. Therefore, the overall switching loss of the power switches is greatly reduced. The output voltage of the converter is varied by PWM control. The effectiveness of the new converter topology is evaluated by experimental results of a laboratory scale down prototype. The obtained experimental results are found agreed with theoretical and soft switching is achieved.
APA, Harvard, Vancouver, ISO, and other styles
5

Tseng, Sheng-Yu, and Jun-Hao Fan. "Soft-Switching Full-Bridge Converter with Multiple-Input Sources for DC Distribution Applications." Symmetry 13, no. 5 (April 29, 2021): 775. http://dx.doi.org/10.3390/sym13050775.

Full text
Abstract:
Due to the advantages of power supply systems using the DC distribution method, such as a conversion efficiency increase of about 5–10%, a cost reduction of about 15–20%, etc., AC power distribution systems will be replaced by DC power distribution systems in the future. This paper adopts different converters to generate DC distribution system: DC/DC converter with PV arrays, power factor correction with utility line and full-bridge converter with multiple input sources. With this approach, the proposed full-bridge converter with soft-switching features for generating a desired voltage level in order to transfer energy to the proposed DC distribution system. In addition, the proposed soft-switching full-bridge converter is used to generate the DC voltage and is applied to balance power between the PV arrays and the utility line. Due to soft-switching features, the proposed full-bridge converter can be operated with zero-voltage switching (ZVS) at the turn-on transition to increase conversion efficiency. Finally, a prototype of the proposed full-bridge converter under an input voltage of DC 48 V, an output voltage of 24 V, a maximum output current of 21 A and a maximum output power of 500 W was implemented to prove its feasibility. From experimental results, it can be found that its maximum conversion efficiency is 92% under 50% of full-load conditions. It was shown to be suitable for DC distribution applications.
APA, Harvard, Vancouver, ISO, and other styles
6

Yungtack Jang, M. M. Jovanovic, and Yu-Ming Chang. "A new ZVS-PWM full-bridge converter." IEEE Transactions on Power Electronics 18, no. 5 (September 2003): 1122–29. http://dx.doi.org/10.1109/tpel.2003.816189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bansal, S. "Zero-Voltage Switching in Full-Bridge Converter." Australian Journal of Electrical and Electronics Engineering 5, no. 1 (January 2008): 85–93. http://dx.doi.org/10.1080/1448837x.2008.11464203.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Patterson, O. D., and D. M. Divan. "Pseudo-resonant full bridge DC/DC converter." IEEE Transactions on Power Electronics 6, no. 4 (October 1991): 671–78. http://dx.doi.org/10.1109/63.97767.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Moschopoulos, G., and P. Jain. "Single-stage SVS PWM full-bridge converter." IEEE Transactions on Aerospace and Electronic Systems 39, no. 4 (October 2003): 1122–33. http://dx.doi.org/10.1109/taes.2003.1261116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jang, Yungtaek, and Milan M. Jovanovic. "A New PWM ZVS Full-Bridge Converter." IEEE Transactions on Power Electronics 22, no. 3 (May 2007): 987–94. http://dx.doi.org/10.1109/tpel.2007.897008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Full-bridge converter"

1

Pekuz, Cagdas. "Z-source, Full Bridge Dc/dc Converter." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612775/index.pdf.

Full text
Abstract:
The thesis is related to investigate characteristics and performance of a Z-source full bridge dc/dc converter which boosts the input voltage to a higher output voltage. Zsource structure increases the reliability of the converter according to current fed full bridge dc/dc converter and also reducing the complexity according to two stage design approach (boost followed by full bridge). Operating principles of the Z-source dc-dc converter is described by current and voltage waveforms of the components and mathematical expressions. Moreover, small signal models and transfer functions are derived for both continuous current mode (CCM) and discontinuous current mode (DCM) operations of the converter. Waveforms obtained, mathematical expressions, small signal models and transfer functions derived are confirmed by simulations. Performance of the converter and controller are both tested in laboratory prototype.
APA, Harvard, Vancouver, ISO, and other styles
2

Yan, Jinghui. "Full Bridge LLC Converter Secondary Architecture Study for Photovoltaic Application." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/82490.

Full text
Abstract:
The increasing global energy demand calls for attention on renewable energy development. Among the available technology, the photovoltaic (PV) panels is a popular solution. Thus, targeted Power Conditioning Systems (PCSs) are drawing increased attention in research. Microconverter is one of the PCS that can support versatile applications in various power line architectures. This work focuses on the comparison of circuit secondary side architectures for LLC converter for microconverter application. As the research foundation, general characteristic of solar energy and PV panel operation are introduced for the understanding of the needs. Previous works are referenced and compared for advantages and limitation. Base on conventional secondary resonant full bridge LLC converter, the two sub-topologies of different secondary rectification network: active, full bridge secondary and active voltage doubler output end LLC converter are presented in detail. The main operating principle is also described in mathematical formula with the corresponding cycle-by-cycle operation to ensure the functional equality before proceeding to performance comparison. Circuit efficiency analysis is conducted on the main power stage and the key components with frequency consideration. The hardware circuit achieved the designed function while the overall hardware efficiency result agrees with analysis. In the implementation, the transformer is costume built for the system pacification. Another part is the parasitic effect analysis. At a high operating frequency and to achieve very high-frequency operation, parasitic effect need to be fully understood and considered as it may have the dominating effect on the system.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
3

Ucar, Aycan. "Design And Implementation Of Z-source Full-bridge Dc/dc Converter." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614667/index.pdf.

Full text
Abstract:
In this work, the operating modes and characteristics of a Z-source full-bridge dc/dc converter are investigated. The mathematical analysis of the converter in continuous conduction mode, CCM and discontinuous conduction mode-2, DCM-2 operations is conducted. The transfer functions are derived for CCM and DCM-2 operation and validated by the simulation. The current mode controller of the converter is designed and its performance is checked in the simulation. The component waveforms in CCM and DCM-2 modes of operation are verified by operating the prototype converter in open-loop mode. The designed controller performance is tested with the closed-loop control implementation of the prototype converter. The theoretical efficiency analysis of the converter is made and compared with the measured efficiency of converter.
APA, Harvard, Vancouver, ISO, and other styles
4

Ismail, Nasser. "A single stage full bridge power factor corrected AC/DC converter." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/mq26004.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Feng, Yixue. "DC fault ride through operation of a full-bridge MMC converter." Thesis, University of Nottingham, 2016. http://eprints.nottingham.ac.uk/32426/.

Full text
Abstract:
In recent years the growth of renewable energy has encouraged the development of HVDC grids. One challenge of building HVDC grids is the power converter response to DC side faults. The full-bridge Modular Multilevel Converter (MMC) is a desired power converter topology which is used in HVDC grids due to its scalability, modularity and capability of blocking DC side faults. Post fault operation of the full-bridge MMC requires the control of power flow, the energy of each sub-module capacitor and the elimination of circulating harmonic current to reduce power loss while DC line-to-ground or DC line-to-line faults exist. This thesis presents a post fault operation method for a full-bridge MMC in order to transmit partial power after a DC line-to-ground fault and provides reactive power after DC line-to-line fault. Simulated results are provide from a point-to-point HVDC system which consists of two eleven-level full-bridge MMC.
APA, Harvard, Vancouver, ISO, and other styles
6

Roggia, Leandro. "Novo conversor CC-CC integrado full-bridge-forward aplicado a uma microrrede residencial." Universidade Federal de Santa Maria, 2013. http://repositorio.ufsm.br/handle/1/3676.

Full text
Abstract:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
This Ph.D. Dissertation focuses on the proposal of a novel converter topology applied to the connection of an energy storage system, composed of a supercapacitor bank and a battery bank, to the dc bus of a residential microgrid. The proposed full-bridge-forward integrated dc-dc converter presents high voltage gain between the input and output, a fundamental requirement for the desired application, bidirectional power flow, galvanic isolation, among other features. The integration process, operation stages (including converter waveforms and equations), design methodology, dc modeling, among others, are presented. Three different clamping circuits structures are studied and applied to the proposed converter. Moreover, a comparison including several parameters with the dual active bridge converter, which is one of the most used topologies for similar applications is performed, highlighting the lesser number of active switches. Experimental results of the proposed converter in different operation modes are presented, validating the theoretical analysis. Experimental results of the dual active bridge converter are also presented and its performance is compared to the proposed converter, where it can be seen that the efficiency of the proposed converter is higher. The topology application is directed to microgrid systems, which attract high attention nowadays due to the possibility of renewable electric energy generation through distributed energy resources and with high reliability.
Esta Tese de Doutorado tem como foco a proposta de uma nova topologia de conversor aplicado para conexão de um sistema de armazenamento de energia, composto de um banco de supercapacitores e um banco de baterias, ao barramento CC de uma microrrede residencial. O conversor CC-CC integrado full-bridge-forward proposto apresenta alto ganho de tensão entre a entrada e saída, requisito fundamental para a aplicação desejada, fluxo de potência bidirecional, isolação galvânica, entre outras características. O processo de integração, etapas de operação (incluindo formas de onda e equações do conversor), metodologia de projeto, modelagem CC, entre outros, são apresentados. Três diferentes estruturas de circuitos grampeadores são estudadas e aplicadas ao conversor proposto. Além disso, uma comparação de diversos parâmetros com o conversor dual active bridge, que é uma das topologias mais utilizadas para aplicações semelhantes é realizada, destacando o menor número de interruptores. Resultados experimentais do conversor proposto em diferentes modos de operação são apresentados, validando as análises teóricas. Resultados experimentais do conversor dual active bridge também são apresentados e o seu desempenho é comparado ao do conversor proposto, onde se observa que o rendimento do conversor proposto é superior. A aplicação da topologia é voltada para sistemas de microrrede, os quais atraem grande atenção atualmente devido à possibilidade de geração de energia elétrica de maneira renovável através de fontes distribuídas e com elevada confiabilidade.
APA, Harvard, Vancouver, ISO, and other styles
7

Kang, Wen. "A line and load independent zero voltage switching dc/dc full bridge converter topology." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ59307.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wu, Yue-Hua, and 吳岳樺. "Boost Converter Grafted with Full Bridge Isolated Converter." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/85201666246561991259.

Full text
Abstract:
碩士
國立中正大學
電機工程研究所
102
This thesis presents design and implementation of an isolated dc/dc converter for renewable energy supply system. A boost converter grafted with full bridge isolated dc/dc converter is adopted. The graft method is used to integrate a boost converter with a full bridge isolated converter, which can save switching component and increase power density. Moreover, the front stage of the proposed converter can boost the voltage twice from the battery, which can reduce the turns ratio, size and power loss of the transformer. Moreover, the proposed converter can cover the voltage range from 31 V to 41 V. The active switches of the converter are operated with variable frequency and pulse-width modulation method to accommodate power variation. The front stage is operated in continuous conduction mode to reduce the current ripple. The rear stage is operated in discontinuous conduction mode to reduce inductor size and increase power density. A Renesas RX62T microprocessor realizes the functions of circuit protection, generation of PWM signals and A/D conversion, etc. If the load voltage drops below the nominal value, the converter is operated in discharging mode to regulate the load voltage. Finally, a 1kW converter has been implemented to verify the feasibility and its characteristics.
APA, Harvard, Vancouver, ISO, and other styles
9

Patterson, Oliver Desmond. "Pseudo-resonant full bridge DC/DC converter." 1987. http://catalog.hathitrust.org/api/volumes/oclc/15634707.html.

Full text
Abstract:
Thesis (M.S.)--University of Wisconsin--Madison, 1987.
Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 77-78).
APA, Harvard, Vancouver, ISO, and other styles
10

Chiu, Szu-Yun, and 邱嗣允. "Asymmetrical Full Bridge Converter with Digital Cantrol." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/9aw67x.

Full text
Abstract:
碩士
國立臺灣科技大學
電機工程系
104
Full-bridge converters have been widely used in high-input-voltage, high-power applications. The symmetrical full-bridge converter has been used for a long time. However, it has large switching losses owing to its hard-switching operation, which impacts its conversion efficiency and limits its power density. To improve efficiency, the phase shift full-bridge converter (PSFB) has been proposed in the last three decades. Because it can achieve zero voltage switching (ZVS) operation, the switching turn-on losses are significantly reduced. To further improve efficiency, circulation loss can be reduced by asymmetrical control. Thus, the asymmetrical full-bridge converter (AFB) is proposed to achieve ZVS operation for a wide range of loads, and digitally controlled adjustable variable dead time can be achieved. In addition to the descriptions of the operation principle and design consideration, two hardware circuits—the AFB and AFB with digitally controlled adjustable variable dead time—with the same 300–400 V input and 12 V/ 360 W output specifications were built and compared.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Full-bridge converter"

1

Hinga, Peterson Kinyua. Current harmonic reduction in a three-phase full wave bridge converter by triplen harmonic injection. Bradford, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ruan, Xinbo. Soft-Switching PWM Full-Bridge Converters: Topologies, Control, and Design. Wiley, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ruan, Xinbo. Soft-Switching PWM Full-Bridge Converters: Topologies, Control, and Design. Wiley & Sons, Incorporated, John, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ruan, Xinbo. Soft-Switching PWM Full-Bridge Converters: Topologies, Control, and Design. Wiley & Sons, Incorporated, John, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Full-bridge converter"

1

Barbi, Ivo, and Fabiana Pöttker. "Full-Bridge ZVS-PWM Converter with Capacitive Output Filter." In Power Systems, 187–218. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96178-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Barbi, Ivo, and Fabiana Pöttker. "Full-Bridge ZVS-PWM Converter with Inductive Output Filter." In Power Systems, 219–43. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96178-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sanz, Luis M., Alan S. I. Zinober, Domingo Biel, Enric Fossas, and Josep M. Olm. "Sliding Control and Optimization in a Full Bridge Boost Converter." In Taming Heterogeneity and Complexity of Embedded Control, 673–88. Newport Beach, CA USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9780470612217.ch37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Santhosh Rani, M., Subhransu Sekhar Dash, and Julie Samantaray. "Analysis of Full Bridge LCC Resonant Converter for Wide Load Variations." In Lecture Notes in Electrical Engineering, 709–19. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-2119-7_69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tao, Haijun, Yiming Zhang, and Xiguo Ren. "A Novel Three-Level Full-Bridge DC–DC Converter with Wide ZVS Range." In Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation, 85–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49367-0_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jeong, Dong-Keun, Myung-Hyo Ryu, Joo-Won Baek, and Hee-Je Kim. "Dynamic Analysis and Optimal Design of High Efficiency Full Bridge LLC Resonant Converter." In Intelligent Robotics and Applications, 327–33. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-40849-6_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Do, Hyun-Lark. "Full-Bridge High Step-Up DC-DC Converter with Two Stage Voltage Doubler." In Lecture Notes in Electrical Engineering, 251–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-27287-5_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Lin, Dengmeng Fu, and Haoxing Liu. "The Small-Signal Model Stability Analysis of Full-Bridge Buck Converter with Compensation Network." In Lecture Notes in Electrical Engineering, 937–50. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33741-3_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Diker, A., D. Korkmaz, Ö. F. Alçin, U. Budak, and M. Gedikpınar. "Design and Implementation of A Single-Stage Full-Bridge DC/DC Converter with ZVS Mode." In Mechatronics 2013, 347–53. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02294-9_44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cai, Binjun, Tao Xiang, and Tanxin Li. "Application Research in DC Charging Pile of Full-Bridge DC–DC Converter Based on Fuzzy Control." In Proceedings of the 9th International Conference on Computer Engineering and Networks, 81–91. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3753-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Full-bridge converter"

1

Nasir and Jon Cobb. "A novel ZVS full-bridge converter." In 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC). IEEE, 2016. http://dx.doi.org/10.1109/eeeic.2016.7555859.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sooksatra, Somboon, and Wanchai Subsingha. "Full-Bridge ZCS Boost Resonant Converter." In 2021 9th International Electrical Engineering Congress (iEECON). IEEE, 2021. http://dx.doi.org/10.1109/ieecon51072.2021.9440366.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lin, Bor-Ren, Yu-Bin Nian, and Tung-Yuan Shiau. "DC converter with full-bridge converters and flying capacitors." In TENCON 2014 - 2014 IEEE Region 10 Conference. IEEE, 2014. http://dx.doi.org/10.1109/tencon.2014.7022295.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Roggia, Leandro, Fernando Beltrame, Luciano Schuch, and Jose Renes Pinheiro. "Comparison between full-bridge-forward converter and DAB converter." In 2013 Brazilian Power Electronics Conference (COBEP 2013). IEEE, 2013. http://dx.doi.org/10.1109/cobep.2013.6785119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yao, Zhilei, and Jing Xu. "An improved integrated boost full-bridge converter." In 2016 IEEE Smart Energy Grid Engineering (SEGE). IEEE, 2016. http://dx.doi.org/10.1109/sege.2016.7589524.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Patterson, O. D., and D. M. Divan. "Pseudo-resonant full bridge DC/DC converter." In 1987 IEEE Power Electronics Specialists Conference. IEEE, 1987. http://dx.doi.org/10.1109/pesc.1987.7077211.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dongsheng Yang, Xinbo Ruan, Yan Li, and Fuxin Liu. "Multiple-input full bridge dc/dc converter." In 2009 IEEE Energy Conversion Congress and Exposition. ECCE 2009. IEEE, 2009. http://dx.doi.org/10.1109/ecce.2009.5316485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dai-Duong Tran, Sun-Ho Yu, Hai-Nam Vu, and Woojin Choi. "A novel soft-switching full bridge converter." In 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia). IEEE, 2016. http://dx.doi.org/10.1109/ipemc.2016.7512811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, Chia-Wei, and Ching-Shan Leu. "A novel soft-switching full-bridge converter." In 2009 International Conference on Power Electronics and Drive Systems (PEDS 2009). IEEE, 2009. http://dx.doi.org/10.1109/peds.2009.5385858.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Davidson, C. Donovan. "Zero voltage switching full - Bridge converter topology." In INTELEC 2010 - 2010 International Telecommunications Energy Conference. IEEE, 2010. http://dx.doi.org/10.1109/intlec.2010.5525647.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Full-bridge converter"

1

Stuart, Thomas A. A Study of Two Control Methods for Full Bridge Converters: Soft Switch Bypass and Current Mode Control. Fort Belvoir, VA: Defense Technical Information Center, June 1990. http://dx.doi.org/10.21236/ada227136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Full-bridge converter' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography