Log in

Relevant bibliographies by topics / Full-bridge DC

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers

Academic literature on the topic 'Full-bridge DC'

Author: Grafiati

Published: 4 June 2021

Last updated: 12 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Full-bridge DC.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Full-bridge DC"

1

Patterson, O. D., and D. M. Divan. "Pseudo-resonant full bridge DC/DC converter." IEEE Transactions on Power Electronics 6, no. 4 (1991): 671–78. http://dx.doi.org/10.1109/63.97767.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

P. Divya Sri, P. Divya Sri, and Dr P. Hari Krishna Prasad. "Single Phase Dual Full Bridge Bi-directional DC-DC Converter for High power applications." Indian Journal of Applied Research 3, no. 5 (2011): 259–65. http://dx.doi.org/10.15373/2249555x/may2013/79.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Jun, Bum-Su, Se-Hyung Lee, Hee-Jun Lee, Soo-Cheol Sin, Seung-Kyo Lee, and Chung-Yuen Won. "Full-Bridge DC/DC Converter for NBI Filament Power Supply." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 25, no. 7 (2011): 32–39. http://dx.doi.org/10.5207/jieie.2011.25.7.032.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lin, B. R. "Full‐bridge DC/DC converter with wide ZVS range." Electronics Letters 53, no. 2 (2017): 104–6. http://dx.doi.org/10.1049/el.2016.3909.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Shimpi, Himani, G. Arunkumar, Santoshkumar M. Hunachal, Ajay Bhosale, and Rajan Kumar Jaysawal. "Dual Input Full Bridge Isolated DC to DC Converter." IOP Conference Series: Materials Science and Engineering 906 (August 27, 2020): 012010. http://dx.doi.org/10.1088/1757-899x/906/1/012010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Muniswethasai, C., and B. Puru shotham. "Analysis on Hybrid-type Full-bridge DC/DC Converters." International Journal of Computer Trends and Technology 36, no. 4 (2016): 231–38. http://dx.doi.org/10.14445/22312803/ijctt-v36p140.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kosenko, Roman, Andrei Blinov, Dmitri Vinnikov, and Andrii Chub. "Asymmetric snubberless current-fed full-bridge isolated DC-DC converters." Electrical, Control and Communication Engineering 14, no. 1 (2018): 5–11. http://dx.doi.org/10.2478/ecce-2018-0001.

Full text

Abstract:

Abstract This paper presents two isolated current-fed fullbridge DC-DC converters that can be used to interface a lower voltage source into a DC bus of higher voltage. The first topology uses a resonant circuit to force current redistribution between low-voltage-side transistors and a passive rectifier. The second topology utilizes an active rectifier with secondary modulation to achieve the same goal. The resonant circuit can be formed by using transformer leakage inductance and the parasitic capacitances of the switches. The converters feature soft switching of semiconductors over a wide range of operating conditions. This is achieved with decreased energy circulation when compared to existing topologies with symmetric control and with fewer semiconductors than in those with phase-shift control. The topologies can be implemented in renewable, supercapacitor, battery, fuel cell, and DC microgrid applications. Steady-state operation and design aspects of the converters are presented and verified experimentally with 400 W prototypes

APA, Harvard, Vancouver, ISO, and other styles

8

Patil, Soumya S. "Current-Fed Resonant Full-Bridge Boost DC/AC/DC Converter." IOSR Journal of Electrical and Electronics Engineering 3, no. 5 (2012): 33–36. http://dx.doi.org/10.9790/1676-0353336.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lee, Sung-Ho, Chun-Yoon Park, Jung-Min Kwon, and Bong-Hwan Kwon. "Hybrid-Type Full-Bridge DC/DC Converter With High Efficiency." IEEE Transactions on Power Electronics 30, no. 8 (2015): 4156–64. http://dx.doi.org/10.1109/tpel.2014.2360404.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pahlevani, Majid, Suzan Eren, Alireza Bakhshai, and Praveen Jain. "A Series–Parallel Current-Driven Full-Bridge DC/DC Converter." IEEE Transactions on Power Electronics 31, no. 2 (2016): 1275–93. http://dx.doi.org/10.1109/tpel.2015.2417773.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Full-bridge DC"

1

Pekuz, Cagdas. "Z-source, Full Bridge Dc/dc Converter." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612775/index.pdf.

Full text

Abstract:

The thesis is related to investigate characteristics and performance of a Z-source full bridge dc/dc converter which boosts the input voltage to a higher output voltage. Zsource structure increases the reliability of the converter according to current fed full bridge dc/dc converter and also reducing the complexity according to two stage design approach (boost followed by full bridge). Operating principles of the Z-source dc-dc converter is described by current and voltage waveforms of the components and mathematical expressions. Moreover, small signal models and transfer functions are derived for both continuous current mode (CCM) and discontinuous current mode (DCM) operations of the converter. Waveforms obtained, mathematical expressions, small signal models and transfer functions derived are confirmed by simulations. Performance of the converter and controller are both tested in laboratory prototype.

APA, Harvard, Vancouver, ISO, and other styles

2

Ucar, Aycan. "Design And Implementation Of Z-source Full-bridge Dc/dc Converter." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614667/index.pdf.

Full text

Abstract:

In this work, the operating modes and characteristics of a Z-source full-bridge dc/dc converter are investigated. The mathematical analysis of the converter in continuous conduction mode, CCM and discontinuous conduction mode-2, DCM-2 operations is conducted. The transfer functions are derived for CCM and DCM-2 operation and validated by the simulation. The current mode controller of the converter is designed and its performance is checked in the simulation. The component waveforms in CCM and DCM-2 modes of operation are verified by operating the prototype converter in open-loop mode. The designed controller performance is tested with the closed-loop control implementation of the prototype converter. The theoretical efficiency analysis of the converter is made and compared with the measured efficiency of converter.

APA, Harvard, Vancouver, ISO, and other styles

3

Yan, Jinghui. "Full Bridge LLC Converter Secondary Architecture Study for Photovoltaic Application." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/82490.

Full text

Abstract:

The increasing global energy demand calls for attention on renewable energy development. Among the available technology, the photovoltaic (PV) panels is a popular solution. Thus, targeted Power Conditioning Systems (PCSs) are drawing increased attention in research. Microconverter is one of the PCS that can support versatile applications in various power line architectures. This work focuses on the comparison of circuit secondary side architectures for LLC converter for microconverter application. As the research foundation, general characteristic of solar energy and PV panel operation are introduced for the understanding of the needs. Previous works are referenced and compared for advantages and limitation. Base on conventional secondary resonant full bridge LLC converter, the two sub-topologies of different secondary rectification network: active, full bridge secondary and active voltage doubler output end LLC converter are presented in detail. The main operating principle is also described in mathematical formula with the corresponding cycle-by-cycle operation to ensure the functional equality before proceeding to performance comparison. Circuit efficiency analysis is conducted on the main power stage and the key components with frequency consideration. The hardware circuit achieved the designed function while the overall hardware efficiency result agrees with analysis. In the implementation, the transformer is costume built for the system pacification. Another part is the parasitic effect analysis. At a high operating frequency and to achieve very high-frequency operation, parasitic effect need to be fully understood and considered as it may have the dominating effect on the system.<br>Master of Science

APA, Harvard, Vancouver, ISO, and other styles

4

Kang, Wen. "A line and load independent zero voltage switching dc/dc full bridge converter topology." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ59307.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Smith, Nathaniel R. "Characterization and Design of Voltage-Mode Controlled Full-Bridge DC/DC Converter with Current Limit." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright152721348332911.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ismail, Nasser. "A single stage full bridge power factor corrected AC/DC converter." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/mq26004.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Feng, Yixue. "DC fault ride through operation of a full-bridge MMC converter." Thesis, University of Nottingham, 2016. http://eprints.nottingham.ac.uk/32426/.

Full text

Abstract:

In recent years the growth of renewable energy has encouraged the development of HVDC grids. One challenge of building HVDC grids is the power converter response to DC side faults. The full-bridge Modular Multilevel Converter (MMC) is a desired power converter topology which is used in HVDC grids due to its scalability, modularity and capability of blocking DC side faults. Post fault operation of the full-bridge MMC requires the control of power flow, the energy of each sub-module capacitor and the elimination of circulating harmonic current to reduce power loss while DC line-to-ground or DC line-to-line faults exist. This thesis presents a post fault operation method for a full-bridge MMC in order to transmit partial power after a DC line-to-ground fault and provides reactive power after DC line-to-line fault. Simulated results are provide from a point-to-point HVDC system which consists of two eleven-level full-bridge MMC.

APA, Harvard, Vancouver, ISO, and other styles

8

Pepa, Elton. "Adaptive Control of a Step-Up Full-Bridge DC-DC Converter for Variable Low Input Voltage Applications." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/9722.

Full text

Abstract:

This thesis shows the implementation of a novel control scheme DC-DC converter. The converter is a phase-shifted full-bridge PWM converter that is designed to operate as a front stage of a power conversion system where the input is a variable low voltage high current source. The converter is designed to step-up the low voltage input to an acceptable level that can be inverted to a 120/240 VAC 60Hz voltage for residential power. A DSP based adaptive control model is developed, taking into account line variations introduced by the input source while providing very good load dynamics for the converter in both discontinuous and continuous conduction modes. The adaptive controller is implemented using two voltage sensors that read the input and the output voltages of the converter. The controller's bandwidth is comparable to current mode control, without the need for an expensive current sensor, yet providing the noise immunity seen in voltage mode controllers. The intended input source was a fuel cell but in its absence a DC supply is utilized instead. The system is simulated for both discontinuous and continuous conduction modes and implemented and demonstrated for the continuous conduction mode. The test results are shown to match the simulation results very closely.<br>Master of Science

APA, Harvard, Vancouver, ISO, and other styles

9

Mao, Shiwei. "Isolated Bi-directional DC-DC Converter with Smooth Start-up Transition." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/52979.

Full text

Abstract:

The bi-directional dc/dc converter is a very popular and effective tool for alternative energy applications. One way it can be utilized is to charge and discharge batteries used in residential solar energy systems. In the day, excess power from the PV panels is used to charge the batteries. During the night, the charged batteries will power the dc bus for loads in the house such as home appliances. The dual active bridge (DAB) converter is very useful because of its high power capability and efficiency. Its symmetry is effective in transferring power in both directions. However, the DAB converter has drawbacks in the start-up stage. These drawbacks in boost mode include high in-rush current during start-up, and the fact that the high side voltage cannot be lower than the low side voltage. A popular existing method to alleviate this problem is the use of an active clamp and a flyback transformer in the circuit topology to charge the high side before the converter is switched into normal boost operation. The active clamp not only helps eliminate the transient spike caused by the transformer leakage, but also continues to be used during steady state. However, this method introduces a new current spike occurring when the converter transitions from start-up mode to boost mode. To alleviate this new setback, an additional transitional stage is proposed to significantly reduce the current spike without the use of any additional components. The converter is current-fed on the low side, and voltage-fed on the high side. A simple phase shift control is used in buck mode and PWM control is used during the boost mode for both the start-up mode and the normal boost operation. This thesis discusses the performance results of a 48-400 V dc/dc converter with 1000 W power output.<br>Master of Science

APA, Harvard, Vancouver, ISO, and other styles

10

Cao, Yu. "A novel step-up/step-down full-bridge DC-DC converter for distributed solar power applications." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54788.

Full text

Abstract:

Among the many renewable energy sources, solar power is becoming one of the quickest to be adopted due to continuous technological progress and reductions in cost. Today's typical photovoltaic modules that are connected together in series and parallel to form strings and sub-arrays. Various distributed photovoltaic architectures are introduced in this thesis and DC-DC converters with maximum power point tracking are also introduced. Partial power processing is a technique to allow only a fraction of the power to be processed by the DC-DC converter, thereby reducing losses and improving efficiency. A new partial power isolated DC-DC converter is proposed in this thesis. The converter features maximum power point tracking and its controller selectively engages the buck portion or the boost portion or both in response to the maximum power point tracking input signal to achieve the desired output voltage and maximum power. With series connected DC-DC converters, each DC-DC converter carries an equal string current and adjusts its output voltage proportional to the available power of the connected photovoltaic module. The proposed topology allows each photovoltaic module to operate at its own maximum power point under varying or mismatched solar irradiance conditions, yet keep the total DC string voltage constant. The proposed circuit is verified using PLECS simulation software. In comparison to the existing circuit with partial power processing method, the proposed circuit overcomes the disadvantage that the output voltage can only be greater than the input voltage. With the two metal oxide semi-conductor field effect transistors added in series with the diodes in the secondary side of the transformer, the new circuit operates at a 100kHZ switching frequency and is able to perform both step up and step down modes with a properly designed control block. As a result, the circuit can convert a voltage from a PV panel that is higher or lower than the output to a regulated DC output voltage.<br>Applied Science, Faculty of<br>Engineering, School of (Okanagan)<br>Graduate

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Full-bridge DC"

1

Tao, Haijun, Yiming Zhang, and Xiguo Ren. "A Novel Three-Level Full-Bridge DC–DC Converter with Wide ZVS Range." In Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation. Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49367-0_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Do, Hyun-Lark. "Full-Bridge High Step-Up DC-DC Converter with Two Stage Voltage Doubler." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-27287-5_40.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Cai, Binjun, Tao Xiang, and Tanxin Li. "Application Research in DC Charging Pile of Full-Bridge DC–DC Converter Based on Fuzzy Control." In Proceedings of the 9th International Conference on Computer Engineering and Networks. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3753-0_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Diker, A., D. Korkmaz, Ö. F. Alçin, U. Budak, and M. Gedikpınar. "Design and Implementation of A Single-Stage Full-Bridge DC/DC Converter with ZVS Mode." In Mechatronics 2013. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-02294-9_44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jiang, Meng, and Wei Li. "A Soft-Switching Control Method of Isolated LC Series Resonant Transformer Full Bridge DC–DC Converter." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-53751-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Guo, Zhiqiang, and Deshang Sha. "Output-Series-Connected Dual Active Bridge Converters for Zero-Voltage Switching Throughout Full Load Range by Employing Auxiliary LC Networks." In New Topologies and Modulation Schemes for Soft-Switching Isolated DC–DC Converters. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9934-4_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Guo, Zhiqiang, and Deshang Sha. "Dual Active Bridge Converter with Parallel-Connected Full Bridges in Low-Voltage Side for ZVS by Using Auxiliary Coupling Inductor." In New Topologies and Modulation Schemes for Soft-Switching Isolated DC–DC Converters. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9934-4_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Sha, Deshang, and Guo Xu. "High Efficiency Current-Fed Dual Active Bridge DC–DC Converter with ZVS Achievement Throughout Full Range of Load Using Optimized Switching Patterns." In High-Frequency Isolated Bidirectional Dual Active Bridge DC–DC Converters with Wide Voltage Gain. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0259-6_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Specks, J. W., and M. Strecker. "A Mechatronic Connector with Flip-Chip Microcontroller and Smart-Power Full-Bridge for DC Motor Control in Multiplex Networks." In Advanced Microsystems for Automotive Applications 2000. Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-642-18146-7_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sha, Deshang, and Guo Xu. "Three-Level Bidirectional DC–DC Converter with an Auxiliary Inductor in Adaptive Working Mode for Full-Operation Zero-Voltage Switching." In High-Frequency Isolated Bidirectional Dual Active Bridge DC–DC Converters with Wide Voltage Gain. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0259-6_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Full-bridge DC"

1

Patterson, O. D., and D. M. Divan. "Pseudo-resonant full bridge DC/DC converter." In 1987 IEEE Power Electronics Specialists Conference. IEEE, 1987. http://dx.doi.org/10.1109/pesc.1987.7077211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dongsheng Yang, Xinbo Ruan, Yan Li, and Fuxin Liu. "Multiple-input full bridge dc/dc converter." In 2009 IEEE Energy Conversion Congress and Exposition. ECCE 2009. IEEE, 2009. http://dx.doi.org/10.1109/ecce.2009.5316485.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Mehdi, Muhammad Ramzan, and A. Mahmood. "Robust control of full bridge DC-DC converter." In 2016 2nd International Conference on Robotics and Artificial Intelligence (ICRAI). IEEE, 2016. http://dx.doi.org/10.1109/icrai.2016.7791236.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Chu, Ching-Lung, and Yi Chen. "ZVS-ZCS bidirectional full-bridge DC-DC converter." In 2009 International Conference on Power Electronics and Drive Systems (PEDS 2009). IEEE, 2009. http://dx.doi.org/10.1109/peds.2009.5385685.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lin, B. R., and Sheng-Zhi Zhang. "Implementation of a modular full-bridge DC/DC converter." In 2016 2nd International Conference on Intelligent Green Building and Smart Grid (IGBSG). IEEE, 2016. http://dx.doi.org/10.1109/igbsg.2016.7539454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Delli Colli, V., R. Di Stefano, and F. Marignetti. "DSP controlled soft-switching full-bridge DC-DC converter." In Proceedings of the 2002 IEEE International Symposium on Industrial Electronics. IEEE, 2002. http://dx.doi.org/10.1109/isie.2002.1025827.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kato, Hisatsugu, Hirofumi Matsuo, Tsubasa Ito, et al. "Comparative analysis of full bridge and half bridge current resonant DC-DC converter." In INTELEC 2011 - 2011 33rd International Telecommunications Energy Conference. IEEE, 2011. http://dx.doi.org/10.1109/intlec.2011.6099776.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Pastor, Marek, Jaroslav Dudrik, and Andrea Vitkovska. "Soft-Switching DC-DC Converter with SiC Full-Bridge Rectifier." In 2019 International Conference on Electrical Drives & Power Electronics (EDPE). IEEE, 2019. http://dx.doi.org/10.1109/edpe.2019.8883908.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Xuezhi, Hu, and Wu Hongxia. "Research of Full Bridge DC/DC Converter Based on TMS320LF2407." In 2009 Asia-Pacific Conference on Information Processing, APCIP. IEEE, 2009. http://dx.doi.org/10.1109/apcip.2009.74.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bifaretti, Stefano, Sabino Pipolo, Alessandro Lidozzi, and Luca Solero. "Control strategies for a ZVT full bridge DC-DC converter." In 2015 IEEE Energy Conversion Congress and Exposition. IEEE, 2015. http://dx.doi.org/10.1109/ecce.2015.7309900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!