Journal articles on the topic 'Fusion à arc'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 journal articles for your research on the topic 'Fusion à arc.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.
Babazadeh, Sina, Ferraby Ling, Nhan B. Nguyen, et al. "Functional Dart-Throwing Motion: A Clinical Comparison of Four-Corner Fusion to Radioscapholunate Fusion Using Inertial Motion Capture." Journal of Wrist Surgery 09, no. 04 (2020): 321–27. http://dx.doi.org/10.1055/s-0040-1710500.
Full textZou, Yeming, Dongqian Wang, Yuanyuan Qu, Hao Liu, Aiting Jia, and Bo Hong. "A Magnetron Plasma Arc Fusion Identification Study Based on GPCC-CNN-SVM Multi-Source Signal Fusion." Sensors 25, no. 10 (2025): 2996. https://doi.org/10.3390/s25102996.
Full textLI, Wei, Gaochong LV, Qiang WANG, and Songtao HUANG. "Arc Characteristics and Weld Bead Microstructure of Ti-6Al-4V Titanium Alloy in Ultra-high Frequency Pulse Gas Tungsten Arc Welding (UHFP-GTAW) Process." Materials Science 26, no. 4 (2020): 426–31. http://dx.doi.org/10.5755/j01.ms.26.4.22329.
Full textMitra, Manu. "Mechanism of an Arc Fusion Reactor." Journal of Electronic Research and Application 2, no. 6 (2018): 10–14. https://doi.org/10.26689/jera.v2i6.612.
Full textYang, Jian-hong, Huai-ying Fang, Ren-cheng Zhang, and Kai Yang. "An arc fault diagnosis algorithm using multiinformation fusion and support vector machines." Royal Society Open Science 5, no. 9 (2018): 180160. http://dx.doi.org/10.1098/rsos.180160.
Full textQu, Na, Wenlong Wei, and Congqiang Hu. "Series Arc Fault Detection Based on Multimodal Feature Fusion." Sensors 23, no. 17 (2023): 7646. http://dx.doi.org/10.3390/s23177646.
Full textSidorov, Vladimir P. "Calculation of Modes of Arc Welding under the Flux of Double-Sided Butt Joints." Materials Science Forum 946 (February 2019): 889–94. http://dx.doi.org/10.4028/www.scientific.net/msf.946.889.
Full textCao, Yu, Xiaofei Wang, Xu Yan, Chuanbao Jia, and Jinqiang Gao. "Prediction of Fusion Hole Perforation Based on Arc Characteristics of Front Image in Backing Welding." Materials 13, no. 21 (2020): 4706. http://dx.doi.org/10.3390/ma13214706.
Full textLiu, Hongsheng, Ruilei Xue, Jianping Zhou, Yang Bao, and Yan Xu. "Effects of Oscillation Width on Arc Characteristics and Droplet Transfer in Vertical Oscillation Arc Narrow-Gap P-GMAW of X80 Steel." Metals 13, no. 6 (2023): 1057. http://dx.doi.org/10.3390/met13061057.
Full textMarques, Paulo Villani, and Roseana da Exaltação Trevisan. "Arc fusion of self-fluxed nickel alloys." Journal of the Brazilian Society of Mechanical Sciences 22, no. 3 (2000): 379–87. http://dx.doi.org/10.1590/s0100-73862000000300001.
Full textKoseeyaporn, P., G. E. Cook, and A. M. Strauss. "Adaptive voltage control in fusion arc welding." IEEE Transactions on Industry Applications 36, no. 5 (2000): 1300–1307. http://dx.doi.org/10.1109/28.871278.
Full textHANSEN, JIM, and DENNIS D. HARWIG. "Impact of Electrode Rotation on Aluminum GMAW Bead Shape." Welding Journal 102, no. 6 (2023): 125–36. http://dx.doi.org/10.29391/2023.102.010.
Full textHoye, Nicholas, Hui Jun Li, John Norrish, Rian J. Dippenaar, and Ali Dehghan-Manshadi. "Weldability of Ti-6Al-4V Alloys Formed via Various Powder Consolidation Techniques." Key Engineering Materials 520 (August 2012): 314–19. http://dx.doi.org/10.4028/www.scientific.net/kem.520.314.
Full textSong, Gang, Zhijie Xu, Qiang Lang, Xin Liu, Hongyang Wang, and Liming Liu. "A Laser-Induced TIG Arc Narrow-Gap Welding Technique for TC4 Titanium Alloy Thick Plates Based on the Spatial Position Control of Laser, Arc and Filler Wire." Metals 14, no. 5 (2024): 510. http://dx.doi.org/10.3390/met14050510.
Full textWU, Yanming, Jiguo Shan, Zhi Li, Xinghua Wang, Yan Feng, and Minglin Wang. "•Narrow Groove Laser-Arc Hybrid Welding of Thick-Sectioned HSLA Steel Using Laser Beam Oscillation." Welding Journal 101, no. 7 (2022): 181–96. http://dx.doi.org/10.29391/2022.101.014.
Full textFaust, Katherine C., and Gary M. Lourie. "Trapeziometacarpal Fusion With and Without Distal Scaphoid Excision: A Cadaveric Model Comparing Thumb Range of Motion." HAND 15, no. 6 (2019): 824–27. http://dx.doi.org/10.1177/1558944719833707.
Full textColliva, Francesco, Cristiano Ciurluini, Andrea Iaboni, Giulia Valeria Centomani, Antonio Trotta, and Fabio Giannetti. "Analysis of Power Conversion System Options for ARC-like Tokamak Fusion Reactor Balance of Plant." Sustainability 16, no. 17 (2024): 7480. http://dx.doi.org/10.3390/su16177480.
Full textWang, Cheng, Qiuliang Li, Xin Zhou, et al. "Contrastive Studies between Laser Repairing and Plasma Arc Repairing on Single-Crystal Ni-Based Superalloy." Materials 12, no. 7 (2019): 1172. http://dx.doi.org/10.3390/ma12071172.
Full textLi, Zhaoqiang, Yang Liu, Zhihua Liang, and Ying Huang. "A Low voltage AC fault arc detection method based on multi-feature fusion." Journal of Physics: Conference Series 2814, no. 1 (2024): 012030. http://dx.doi.org/10.1088/1742-6596/2814/1/012030.
Full textWang, Xiaolong, Aimin Wang, Kaixiang Wang, and Yuebo Li. "Process stability for GTAW-based additive manufacturing." Rapid Prototyping Journal 25, no. 5 (2019): 809–19. http://dx.doi.org/10.1108/rpj-02-2018-0046.
Full textHe, Jun, Ke Wang, and Jiangang Li. "Application of an Improved Mayr-Type Arc Model in Pyro-Breakers Utilized in Superconducting Fusion Facilities." Energies 14, no. 14 (2021): 4383. http://dx.doi.org/10.3390/en14144383.
Full textFENN, ROBERT. "ULTRASONIC MONITORING AND CONTROL DURING ARC FUSION WELDING." Nondestructive Testing Communications 2, no. 2 (1985): 43–53. http://dx.doi.org/10.1080/10589758508952913.
Full textAnders, André, and Joe W. Kwan. "Arc-discharge ion sources for heavy ion fusion." Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 464, no. 1-3 (2001): 569–75. http://dx.doi.org/10.1016/s0168-9002(01)00143-7.
Full textRutkowski, H. L., R. M. Johnson, W. G. Greenway, M. A. Gross, D. W. Hewett, and S. Humphries. "Multiple arc ion sources for heavy ion fusion." Review of Scientific Instruments 61, no. 1 (1990): 553–55. http://dx.doi.org/10.1063/1.1141249.
Full textLiu, F., N. Qi, S. Gensler, R. R. Prasad, M. Krishnan, and I. G. Brown. "Vacuum arc ion source for heavy ion fusion." Review of Scientific Instruments 69, no. 2 (1998): 819–21. http://dx.doi.org/10.1063/1.1148467.
Full textKrajewski, A., W. Włosiński, T. Chmielewski, and P. Kołodziejczak. "Ultrasonic-vibration assisted arc-welding of aluminum alloys." Bulletin of the Polish Academy of Sciences: Technical Sciences 60, no. 4 (2012): 841–52. http://dx.doi.org/10.2478/v10175-012-0098-2.
Full textDai, Zhefu, Xiao-Nan Zhang, Fariborz Nasertorabi, et al. "Synthesis of site-specific antibody-drug conjugates by ADP-ribosyl cyclases." Science Advances 6, no. 23 (2020): eaba6752. http://dx.doi.org/10.1126/sciadv.aba6752.
Full textYan, Chen, Die Yang, Laihui Han, Zhonggang Zhao, Zengzhen Li, and Yongli Sui. "Influence of multi-process parameter linkage on the formation of lack of fusion defects based on SYSWLED simulation analysis." Journal of Physics: Conference Series 2842, no. 1 (2024): 012087. http://dx.doi.org/10.1088/1742-6596/2842/1/012087.
Full textXiao, Ning, Haoyu Kong, Qingjie Sun, and Ninshu Ma. "Study of Process, Microstructure, and Properties of Double-Wire Narrow-Gap Gas Metal Arc Welding Low-Alloy Steel." Materials 17, no. 24 (2024): 6183. https://doi.org/10.3390/ma17246183.
Full textBurcă, Mircea, Aurelian Vasile Magda, and Ioan Lucaciu. "Technological Aspects Regarding Manual Metal Arc Welding Using Pulsed Current for Fillet Joints Applications." Advanced Materials Research 1138 (July 2016): 56–61. http://dx.doi.org/10.4028/www.scientific.net/amr.1138.56.
Full textBae, Jin Whan, Ethan Peterson, and Jonathan Shimwell. "AR reactor neutronics multi-code validation*." Nuclear Fusion 62, no. 6 (2022): 066016. http://dx.doi.org/10.1088/1741-4326/ac5450.
Full textLi, Lin, Rongcai Ma, Cheng Yang, et al. "Effect of Bias Arc on Microstructure and Corrosion Resistance of Q235/304 Dissimilar-Steel-Welded Joints." Materials 17, no. 17 (2024): 4234. http://dx.doi.org/10.3390/ma17174234.
Full textYang, Cheng Dong, H. Y. Huang, H. J. Zhang, Y. X. Chen, and San Ben Chen. "Multi-Pass Route Planning for Thick Plate of Low Alloy High Strength Steel by Double-Sided Double Arc Welding." Advanced Materials Research 590 (November 2012): 28–34. http://dx.doi.org/10.4028/www.scientific.net/amr.590.28.
Full textPrzełożyńska, E., K. N. Braszczyńska-Malika, and M. Mróz. "Structure of MMCs with SiC Particles after Gas-tungsten Arc Welding." Archives of Foundry Engineering 15, no. 4 (2015): 65–68. http://dx.doi.org/10.1515/afe-2015-0081.
Full textNeumann, Benedikt, Max Biegler, Sven-Frithjof Goecke, and Michael Rethmeier. "Detektion von Bindefehlern beim DED-Arc." Zeitschrift für wirtschaftlichen Fabrikbetrieb 119, no. 7-8 (2024): 577–83. http://dx.doi.org/10.1515/zwf-2024-1107.
Full textEbrahimpour, Reza, Rasul Fesharakifard, and Seyed Mehdi Rezaei. "An adaptive approach to compensate seam tracking error in robotic welding process by a moving fixture." International Journal of Advanced Robotic Systems 15, no. 6 (2018): 172988141881620. http://dx.doi.org/10.1177/1729881418816209.
Full textHe, Jun, Ke Wang, and Jiangang Li. "Numerical Study on Multiple Arcs in a Pyro-Breaker Based on the Black-Box Arc Model." Electronics 11, no. 11 (2022): 1702. http://dx.doi.org/10.3390/electronics11111702.
Full textHirose, Akio, and Kojiro F. Kobayashi. "Laser Beam Welding of Automobile Materials for Lightweight Car Body." Materials Science Forum 502 (December 2005): 487–92. http://dx.doi.org/10.4028/www.scientific.net/msf.502.487.
Full textZhang, Shuchang, Honghong Wang, Yangwen Wang, and Liang Cao. "Study on the Novel High Manganese Austenitic Steel Welded Joints by Arc Welding for Cryogenic Applications of LNG Tanks." Materials 16, no. 6 (2023): 2381. http://dx.doi.org/10.3390/ma16062381.
Full textGuo Tieying, 郭铁英, 娄淑琴 Lou Shuqin, 李宏雷 Li Honglei, 姚磊 Yao Lei, and 简水生 Jian Shuisheng. "Low Loss Arc Fusion Splice of Photonic Crystal Fibers." Acta Optica Sinica 29, no. 2 (2009): 511–16. http://dx.doi.org/10.3788/aos20092902.0511.
Full textPagliuca, Enrico, and Antonino Meli. "NUCLEAR FUSION, THE ARC REACTOR, AND INNOVATIVE NUCLEAR TECHNOLOGY." International Journal of Ecosystems and Ecology Science (IJEES) 11, no. 3 (2021): 371–76. http://dx.doi.org/10.31407/ijees11.302.
Full textMackenzie, K. H., R. W. Montgomery, and D. Engledow. "Contrôle dynamique de la fusion au four à arc." Revue de Métallurgie 86, no. 4 (1989): 305–10. http://dx.doi.org/10.1051/metal/198986040305.
Full textMURATA, Seiji, Toshihisa OHTSUKA, Hiroshi TAMURA, et al. "Study on Strength of Arc Fusion Spliced Optical Fiber." Proceedings of the 1992 Annual Meeting of JSME/MMD 2002 (2002): 167–68. http://dx.doi.org/10.1299/jsmezairiki.2002.0_167.
Full textMURATA, Seiji, Toshihisa OHTSUKA, Hiroshi TAMURA, et al. "Study on Strength of Arc Fusion Spliced Optical Fiber." Proceedings of the 1992 Annual Meeting of JSME/MMD 2003 (2003): 829–30. http://dx.doi.org/10.1299/jsmezairiki.2003.0_829.
Full textRutkowski, H. L., D. W. Hewett, and S. Humphries. "Development of arc ion sources for heavy ion fusion." IEEE Transactions on Plasma Science 19, no. 5 (1991): 782–89. http://dx.doi.org/10.1109/27.108415.
Full textMatsumoto, Michito, Tadashi Haibara, Yutaka Katsuyama, Masamitsu Tokuda, Tadatoshi Tanifuji, Regular Members, and Mitsuru Miyauchi, Regular Member. "Long-term reliability assurance for arc-fusion spliced fiber." Electronics and Communications in Japan (Part I: Communications) 68, no. 2 (1985): 73–81. http://dx.doi.org/10.1002/ecja.4410680210.
Full textOrłowicz, A. W., and M. Mróz. "Microstructure and fatigue strength of A356 alloy castings refined on the surface by rapid crystallization." International Journal of Materials Research 94, no. 12 (2003): 1320–26. http://dx.doi.org/10.1515/ijmr-2003-0238.
Full textGuo, Lin, Tian Hui Zhang, Ren Ping Xu, and Hui He. "Properties Effect of 16MnR Steel Weld Joint by Different Welding Methods." Advanced Materials Research 690-693 (May 2013): 2639–42. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.2639.
Full textSingh, Harpuneet, Bikramjit Singh, and Gurcharan Singh. "Current Trends in Wire Arc Additive Manufacturing- A Review." International Journal of Advance Research and Innovation 10, no. 3 (2022): 74–80. http://dx.doi.org/10.51976/ijari.1032210.
Full textWinczek, Jerzy, and Kwiryn Wojsyk. "New method of calculating the amount of heat input to the weld." Biuletyn Instytutu Spawalnictwa, no. 3 (June 2020): 23–27. http://dx.doi.org/10.17729/ebis.2020.3/2.
Full text