Log in

Relevant bibliographies by topics / Gain and offset mismatches / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Gain and offset mismatches.

Dissertations / Theses on the topic 'Gain and offset mismatches'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 22 dissertations / theses for your research on the topic 'Gain and offset mismatches.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Olsson, Mattias. "Contributions to Delay, Gain, and Offset Estimation." Doctoral thesis, Linköping : Department of Electrical Engineering, Linköping University, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-11826.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Mudge, James B. "A study of the effect of lithographic press speed on dot gain /." Online version of thesis, 1991. http://hdl.handle.net/1850/11149.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sun, Kuang-Hua. "A study of mechanical dot gain for different dot shapes based on the border zone theory /." Online version of thesis, 1991. http://hdl.handle.net/1850/11209.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Tallhage, Jonas. "Construction of a Low-Noise Amplifier Chain With Programmable Gain and Offset." Thesis, Linköpings universitet, Elektroniksystem, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-106143.

Full text

Abstract:

A low-noise, variable gain amplier chain was constructed for interfa-cing a sensor to an ADC. During the course of the work two dierent methods -switched-capacitor circuits and chopping circuits - for dealing with 1/f noise wereinvestigated during the course of the work. The resulting circuit did not quitemeet the performance required by the specication, some possible improvementsare suggested.

APA, Harvard, Vancouver, ISO, and other styles

5

Lu, Jiang-hong. "An algorithm for intrinsic gain and offset stabilization of pulse height spectra." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/47311.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Dailey, David Gordon. "A study of the effect of ink viscosity on dot gain in offset lithography /." Online version of thesis, 1985. http://hdl.handle.net/1850/10319.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hauck, Shahram. "Automated CtP Calibration for Offset Printing : Dot gain compensation, register variation and trapping evaluation." Doctoral thesis, Linköpings universitet, Institutionen för teknik och naturvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-119366.

Full text

Abstract:

Although offset printing has been and still is the most common printing technology for color print productions, its print productions are subject to variations due to environmental and process parameters. Therefore, it is very important to frequently control the print production quality criteria in order to make the process predictable, reproducible and stable. One of the most important parts in a modern industrial offset printing is Computer to Plate (CtP), which exposes the printing plate. One of the most important quality criteria for printing is to control the dot gain level. Dot gain refe

APA, Harvard, Vancouver, ISO, and other styles

8

Hicks, William T. "OVER QUANTIZING, THE NEXT STEP IN DIGITAL SIGNAL PROCESSING." International Foundation for Telemetering, 2002. http://hdl.handle.net/10150/605604.

Full text

Abstract:

International Telemetering Conference Proceedings / October 21, 2002 / Town & Country Hotel and Conference Center, San Diego, California<br>Simplification of the analog front end of a signal conditioning circuit can be accomplished by over-quantizing the input signal and using DSP for gain and offset. In this case, a much higher precision A/D converter is used than required by the desired output accuracy. The excess bits are then used to allow the DSP math to give an effective gain to the signal. By a similar function, offset of over 100% can be mathematically removed as long as the input

APA, Harvard, Vancouver, ISO, and other styles

9

Polák, Josef. "Modelování diferenčního proudového zesilovače." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220204.

Full text

Abstract:

The aim of my diploma thesis was programming of systems for measuring AC, DC and impedance measurements. Each measuring system measures selected characteristics of current amplifier with controllable amplification DACA_N. Control programs I have created in Agilent VEE Pro 9.2. The measured data are stored to executable files in MS Excel for further processing. With created measurement programs I made measurements of eight current amplifiers. The results of individual measurements I compiled into graphs and compared with each other circuit characteristics of amplifiers. Then there is described

APA, Harvard, Vancouver, ISO, and other styles

10

Kneblík, Adam. "Zesilovač pro tenzometry." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217706.

Full text

Abstract:

The thesis deals about method of gain signals from strain gauge bridges. There are mentioned some signal conditioning methods for bridges amplifiers and charactered their properties. In the next part of this thesis are calculated the amplifier errors for various temperature. There are projected individual variants of strain gage amplifiers (instrumentation amplifier AD524, isolation amplifier, switched capacitor based instrumentation amplifier), their properties are compared with strain gage amplifier Vishay P-3500.

APA, Harvard, Vancouver, ISO, and other styles

11

Tylš, Ladislav. "Získávání dat z kamer." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217760.

Full text

Abstract:

This thesis describes the principles of making application which is able to set and control camera. The first part describes basic camera connections and it explains definition and specification of camera’s features. The second part of my thesis describes implementation of application, which can use more cameras to image preview, image acquisition and to simply set of camera’s features. To implement the applications we can use MATLAB and C++BUILDER uses opencv libraries.

APA, Harvard, Vancouver, ISO, and other styles

12

Lin, Yi Ting, and 林儀婷. "Adaptive gain and offset control for image thresholding." Thesis, 1995. http://ndltd.ncl.edu.tw/handle/02429903497350529020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Yang, Hui-Chen, and 楊蕙甄. "A Short-Channel Variable Gain Amplifier with DC Offset Cancellation and Gain Calibration Loop." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/63026791132656734491.

Full text

Abstract:

碩士<br>國立清華大學<br>電機工程學系<br>98<br>In this thesis, a short-channel variable gain amplifier with digital feedback loops is proposed. For the purpose of area saving, the entire work is implemented with minimum gate length CMOS devices. This results in severe circuit process variations. To overcome this problem, two digital feedback loops are needed for the DC offset cancellation and gain calibration. The VGA circuit is based on a fully-differential gain stage with a degeneration resistor network. The resistance of this resistor network is digitally controlled to provide enough gain range and re

APA, Harvard, Vancouver, ISO, and other styles

14

Chu, Yu-Jui, and 朱有瑞. "Investigation of High Current Gain, Low Offset Voltage Heterojunction Bipolar Transistors." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/33084429685787059444.

Full text

Abstract:

碩士<br>國立高雄師範大學<br>物理學系<br>91<br>In this article, the characteristics of InP/InGaAs heterojunction bipolar transistors (HBT’s) with δ-doped sheet are investigated. We first develop the band diagrams and the dc current model to approach the experiment measurement. Then we can see how theδ-doped sheet affect the band diagrams and the changes of dc current. The effect of adding spacer layer may also be demonstrated by the theoretical analysis. Theirs employments of δ-doped sheet and spacer layer efficiently eliminate the potential spike at base-emitter (B-E) junction, lower the collecto

APA, Harvard, Vancouver, ISO, and other styles

15

Cheng, Jhih-Siou, and 程智修. "A CMOS Variable Gain Amplifier with DC Offset Calibration Loop for Wireless Communication." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/81746491205641004530.

Full text

Abstract:

碩士<br>國立清華大學<br>電機工程學系<br>93<br>This thesis implements a complementary metal oxide semiconductor (CMOS) VGA with digitally controlled gain. This VGA adopts the degeneration type amplifier to vary voltage gain and uses the super source follower input stage to enhance the linearity. And a digital based DC offset calibration loop is proposed to achieve the DC offset cancellation. An experimental chip is fabricated in UMC 0.18 µm CMOS process and its total area . The VGA provide 64 dB gain range with 2 dB step and more than 10 MHz bandwidth. The current consumption from a single 1.8 V supply is

APA, Harvard, Vancouver, ISO, and other styles

16

Chen, Yun-Fan, and 陳韻帆. "A Linear-in-dB Variable Gain Amplifier with Background Digital DC Offset Cancellation Loop." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/73224707218101289082.

Full text

Abstract:

碩士<br>國立清華大學<br>電機工程學系<br>96<br>This thesis implements a complementary metal oxide semiconductor (CMOS) linear-in-dB VGA with digitally controlled gain. This VGA adopts the degeneration- type current amplifier to vary current gain. A voltage-to-current converter and a current-to-voltage converter are added for measurement convenience. And a digital-based DC offset calibration loop is proposed to achieve the DC offset cancellation. An experimental chip is fabricated in TSMC 0.18 µm CMOS process and its total area 1023 × 1023 μm2. The VGA provide 51 dB gain range with 5.1 dB step and more than

APA, Harvard, Vancouver, ISO, and other styles

17

Ching-Hao, Lee. "A Resistorless Variable Gain Amplifier With DC Offset Measurement & Auto Calibration Loop For Wireless Communication." 2006. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0016-0109200613415355.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Lee, Ching-Hao, and 李青澔. "A Resistorless Variable Gain Amplifier With DC Offset Measurement & Auto Calibration Loop For Wireless Communication." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/99008522356097341620.

Full text

Abstract:

碩士<br>國立清華大學<br>電機工程學系<br>94<br>This thesis describes a complementary metal oxide semiconductor (CMOS) Variable Gain Amplifier (VGA) with digitally controlled gain. Implemented in a standard 1.8V, 0.18 CMOS process, this VGA adopts the degeneration type amplifier to vary voltage gain and uses the super source follower input stage to enhance the linearity. Besides, instead of any resistor model, this VGA’s resistor network only uses transistor-level substitution in order to eliminate the non-linear effect of MOS switches and achieves high linearity. A comparator is used in measuring DC of

APA, Harvard, Vancouver, ISO, and other styles

19

Huang, Chun-Ying, and 黃俊穎. "Compensation For Gain/Phase Imbalance And DC Offset At Quadrature Modulator And Demodulator With Adaptive Inverse QRD-RLS Algorithm." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/56002730593536820764.

Full text

Abstract:

碩士<br>國立中山大學<br>電機工程學系研究所<br>90<br>There has been much effort in new design for transceiver used in mobile communications. The general approach is to combine RF functions with DSP to allow linear modulation techniques and permit flexibility of modulation format and receiver processing. In practice, with the quadrature modulation technique there is always some imbalance between the I- and Q channels of modulator and demodulator. This is mainly due to finite tolerances of capacitor and resistor values used to implement the analog components. The unavoidable imbalance between the I- and Q channel

APA, Harvard, Vancouver, ISO, and other styles

20

Wang, Yuan-Hwa, and 王遠華. "The Study of the Optimum Tone Reproduction Curve using Frequency Modulation（FM）Screening Technique and FM Compare with AM the Dot Gain in the Offset Printing." Thesis, 1995. http://ndltd.ncl.edu.tw/handle/86957009459647614117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Naveen, N. "Diversity-Mutiplexing Tradeoff Of Asynchronous Cooperative Relay Networks And Diversity Embedded Coding Schemes." Thesis, 2008. https://etd.iisc.ac.in/handle/2005/828.

Full text

Abstract:

This thesis consists of two parts addressing two different problems in fading channels. The first part deals with asynchronous cooperative relay communication. The assumption of nodes in a cooperative communication relay network operating in synchronous fashion is often unrealistic. In this work we consider two different models of asynchronous operation in cooperative-diversity networks experiencing slow fading and examine the corresponding Diversity-Multiplexing Tradeoffs (DMT). For both models, we propose protocols and distributed space-time codes that asymptotically achieve the transmit d

APA, Harvard, Vancouver, ISO, and other styles

22

Naveen, N. "Diversity-Mutiplexing Tradeoff Of Asynchronous Cooperative Relay Networks And Diversity Embedded Coding Schemes." Thesis, 2008. http://hdl.handle.net/2005/828.

Full text

Abstract:

This thesis consists of two parts addressing two different problems in fading channels. The first part deals with asynchronous cooperative relay communication. The assumption of nodes in a cooperative communication relay network operating in synchronous fashion is often unrealistic. In this work we consider two different models of asynchronous operation in cooperative-diversity networks experiencing slow fading and examine the corresponding Diversity-Multiplexing Tradeoffs (DMT). For both models, we propose protocols and distributed space-time codes that asymptotically achieve the transmit di

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!