Relevant bibliographies by topics / Gas Insulated Transmission Line

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Gas Insulated Transmission Line'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gas Insulated Transmission Line.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gas Insulated Transmission Line"

1

Widger, Phillip, Daniel Carr, Alistair Reid, Meirion Hills, Chris Stone, and A. (Manu) Haddad. "Partial Discharge Measurements in a High Voltage Gas Insulated Transmission Line Insulated with CO2." Energies 13, no. 11 (June 5, 2020): 2891. http://dx.doi.org/10.3390/en13112891.

Full text
Abstract:
This paper uses practical experimentation to analyse the effect of replacing SF6 with pure CO2 in conventional gas insulated transmission line sections by studying partial discharge measurements taken with applied voltages up to 242 kV (rms). The results can also help in understanding the properties of new alternative gas mixtures which can be utilised with a ratio of up to and over 95% CO2. The experiments undertaken involved filling a gas insulated line demonstrator with 3 bars of CO2 and applying voltages up to 242 kV in both clean conditions and particle-contaminated enclosure conditions. The results demonstrate that CO2 can be used to insulate gas equipment without breakdown at high voltage, however, a higher gas-filling pressure may be needed to reduce the partial discharge found in the tests presented in this paper. Another aspect of the work showed that partial discharge (PD) measurements from internal ultra-high frequency (UHF) sensors compared with a direct measurement from a capacitive divider both clearly showed the effect of contaminating particles in CO2. However, the PD divider measurements also showed considerable external PD on the outside of the gas compartment, leading to the conclusion that UHF sensors are still regarded as having the highest sensitivity and noise immunity for gas insulated switchgear (GIS) or gas insulated transmission line (GIL) systems including when the equipment is insulated with CO2.
APA, Harvard, Vancouver, ISO, and other styles
2

Cheetham, Peter, Chul H. Kim, Sastry Pamidi, and Lukas Graber. "Optimization of a superconducting gas-insulated transmission line." IEEE Transactions on Dielectrics and Electrical Insulation 26, no. 3 (June 2019): 930–38. http://dx.doi.org/10.1109/tdei.2019.007884.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cheetham, Peter, Chul H. Kim, Sastry Pamidi, and Lukas Graber. "Optimization of a superconducting gas-insulated transmission line." IEEE Transactions on Dielectrics and Electrical Insulation 26, no. 3 (June 2019): 930–38. http://dx.doi.org/10.1109/tdei.2019.8726043.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tu, Youping, Geng Chen, Chuanyang Li, Cong Wang, Guoming Ma, Hongyang Zhou, Xin Ai, and Yi Cheng. "±100-kV HVDC SF6/N2 Gas-Insulated Transmission Line." IEEE Transactions on Power Delivery 35, no. 2 (April 2020): 735–44. http://dx.doi.org/10.1109/tpwrd.2019.2925519.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Araki, Tomoo, Tsutomu Hayashi, and Yukio Kuroyanagi. "Application of 8, 000A Class 275kV Gas Insulated Transmission Line." IEEJ Transactions on Power and Energy 110, no. 7 (1990): 591–97. http://dx.doi.org/10.1541/ieejpes1990.110.7_591.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sun, Gang, Bo Zhang, Jianying Zhong, Yujing Guo, and Hongyu Liu. "Motion of metallic particle near the conical insulator of UHVAC gas-insulated transmission line." Journal of Engineering 2019, no. 16 (March 1, 2019): 2324–27. http://dx.doi.org/10.1049/joe.2018.8698.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xiong, Hao, Hao Jiang, Bin Zhou, and Gang Zhou. "Research on an Accident of 500 kV Gas Insulated Transmission Line." Applied Mechanics and Materials 492 (January 2014): 178–81. http://dx.doi.org/10.4028/www.scientific.net/amm.492.178.

Full text
Abstract:
Gas insulated transmission line (GIL) is increasingly being utilized in the power system because of its advantages, such as large transportation capacity, no insulation ageing, low loss, and low electromagnetic radiation. However, even GIL equipment in operation can go wrong under the influence of various factors. This paper is an in-depth analysis on a 500kV GIL fault resulting in the tripping operation of a substation chief transformer. The causes of the accident are discussed from several aspects, such as insulation defect, design of gas inlet port, and effect of temperature on the water in the GIL. Some suggestions are given for the structure design, manufacture, installation, and operation of GIL.
APA, Harvard, Vancouver, ISO, and other styles
8

Szczegielniak, Tomasz, Dariusz Kusiak, and Paweł Jabłoński. "Determination of the Operating Temperature of the Gas-Insulated Transmission Line." Applied Sciences 10, no. 24 (December 11, 2020): 8877. http://dx.doi.org/10.3390/app10248877.

Full text
Abstract:
Gas-insulated lines (GILs) have been increasingly used as high-current busducts for high-power transmission. Temperature is one of the most important factors affecting the performance and ampacity of GILs. In this paper, an analytical method was proposed to determine the temperature of a three-phase high-current busduct in the form of a single pole GIL. First, power losses in the phase conductors and enclosures were determined analytically with the skin, and proximity effects were taken into account. The determined power losses were used as heat sources in thermal analysis. Considering the natural convection and radiation heat transfer effects, the heat balance equations on the surface of the phase conductors and the screens were established, respectively. Subsequently, the temperature of the phase conductors and the enclosures were determined. The validation of the proposed method was carried out using the finite element method and laboratory measurements.
APA, Harvard, Vancouver, ISO, and other styles
9

Kuroyanagi, Y., A. Toya, T. Hayashi, and T. Araki. "Construction of 8000 A class 275 kV gas insulated transmission line." IEEE Transactions on Power Delivery 5, no. 1 (1990): 14–20. http://dx.doi.org/10.1109/61.107249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dong Ye, 董烨, 董志伟 Dong Zhiwei, 杨温渊 Yang Wenyuan, 陈军 Chen Jun, 周前红 Zhou Qianhong, 孙会芳 Sun Huifang, and 周海京 Zhou Haijing. "Numerical simulation on gas ionization course in magnetically insulated transmission line oscillator." High Power Laser and Particle Beams 24, no. 3 (2012): 732–36. http://dx.doi.org/10.3788/hplpb20122403.0732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Gas Insulated Transmission Line"

1

Cai, Xiaolei. "Elimination of SF6 from transmission system equipment." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/elimination-of-sf6-from-transmission-system-equipment(4288ba94-8bcb-4805-94ab-5235fca5b94c).html.

Full text
Abstract:
Sulphur hexafluoride gas is the dominant insulation and interruption material in high voltage gas insulated substation. Its usage remains a concern of transmission system operators owing to the global warming potential of the gas. The work carried out in this thesis aims to find the environment-friendly materials that can replace SF6. These candidates are required to have a strong dielectric strength for high voltage busbar insulation and well arc extinguishing capability necessary for high voltage circuit breaker.A range of alternative insulation types including CF3I gas and its mixture, high pressure air and solid insulating foam are considered as substitute of SF6. Theoretical studies on the dimensions of busbars used in substations are carried out for these options. The dimension of the dielectric system and its ampacity of respect system are calculated using heat transfer models considering their boiling point and proper working pressure which is related with the dielectric strength of some gas.On the other hand, SF6 gas circuit breaker is extremely popular on the medium and high voltage power networks owning to its effective arc extinguishing performance. It would be ideal if a substitute material could be found for SF6 as an interruption material. Biodegradable oil PTFE ablation, other gas candidates including N2, CF3I are investigated as possible replacement of SF6 through literature study.The usage of vacuum circuit breaker is eventually capable to operate in high voltage transmission system. Simulations have been carried out with software ATP/EMTP to investigate the influence of different characteristics of vacuum circuit breaker including chopping current level, the dielectric strength of vacuum gap and the opening time. And then the probability of overvoltages when vacuum circuit breakers installed is studied by statistical study in MATLAB.
APA, Harvard, Vancouver, ISO, and other styles
2

Shafai, Leili. "Application of lattice gas automata to electromagnetic scattering and transmission line modelling." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ57576.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ridenour, Daniel Keith. "Examination of Power Systems Solutions Considering High Voltage Direct Current Transmission." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/63927.

Full text
Abstract:
Since the end of the Current Wars in the 19th Century, alternating current (AC) has dominated the production, transmission, and use of electrical energy. The chief reason for this dominance was (and continues to be) that AC offers a way minimize transmission losses yet transmit large power from generation to load. With the Digital Revolution and the entrance of most of the post-industrialized world into the Information Age, energy usage levels have increased due to the proliferation of electrical and electronic devices in nearly all sectors of life. A stable electrical grid has become synonymous with a stable nation-state and a healthy populace. Large-scale blackouts around the world in the 20th and the early 21st Centuries highlighted the heavy reliance on power systems and because of that, governments and utilities have strived to improve reliability. Simultaneously occurring with the rise in energy usage is the mandate to cut the pollution by generation facilities and to mitigate the impact grid expansion has on environment as a whole. The traditional methods of transmission expansion are beginning to show their limits as utilities move generation facilities farther from load centers, which reduces geographic diversity, and the integration of nondispatchable, renewable energy sources upsets the current operating regime. A challenge faces engineers - how to expand generation, expand transmission capacity, and integrate renewable energy sources while maintaining maximum system efficiency and reliability. A technology that may prove beneficial to the operation of power system is high voltage direct current transmission. The technology brings its own set of advantages and disadvantages, which are in many ways the complement of AC. It is important to update transmission planning processes to account for the new possibilities that HVDC offers. This thesis submits a discussion of high voltage direct current transmission technology itself and an examination of how HVDC can be considered in the planning process.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
4

Vishal, Vaibhaw 1978. "Plastic buckling in gas transmission line-pipes, cold formed from thermo-mechanically-controlled rolling of low-allow steel plates." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/40359.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2007.
Includes bibliographical references (leaves 157-164).
The need for energy infrastructure has led to transportation of gases over long distances. The strength-grade of pipeline steels used for transportation of gases has been increasing to reduce the cost of the overall pipeline system. Along with higher strength, adequate fracture toughness and resistance to plastic buckling are required of pipes installed in earthquake- or frost-prone regions. To get higher strength with adequate deformability in low-alloy pipeline steels, plates for pipes are typically made today by thermo-mechanically-controlled rolling processes, which introduce strong crystallographic texture and anisotropy in the pipes. The plates are then cold-formed into pipes, which introduces further anisotropy and residual stresses in the pipe. In the current work, effects of various steps of the pipe manufacturing process, such as rolling, cold forming, etc., on residual stress, hardening moduli, plastic anisotropy, and eventually, to the buckling resistance of the pipe, are studied. Effects of various types of geometric perturbation on plastic buckling response of pipes are also studied.
(cont.) Due to the crystallographic texture and cold-forming, crystal plasticity-based constitutive models instead of Mises plasticity-based constitutive models may be better suited to model the pipe. In the current work, crystal plasticity-based material models are used to predict the buckling response of pipes. Results show that the buckling strain in uniaxial compression, predicted using a crystal plasticity-based model, is - 20% less than the one predicted using an "equivalent" Mises plasticity-based model, for a pipe with d/t ratio of 51. Further results show that variation in material properties and residual stresses caused by cold forming reduces the buckling strain by - 30%, for a pipe with d/t ratio of 51.
by Vaibhaw Vishal.
Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
5

"Development of the Selection Procedure of an Insulating Foam for Its Application in Gas Insulated Transmission Lines, Demonstrated Using Syntactic Foam." Master's thesis, 2014. http://hdl.handle.net/2286/R.I.26826.

Full text
Abstract:
abstract: Due to increasing integration of renewable resources in the power grid, an efficient high power transmission system is needed in the near future to transfer energy from remote locations to the load centers. Gas Insulated Transmission Line (GIL) is a specialized high power transmission system, designed by Siemens, for applications requiring direct burial or vertical installation of the transmission line. GIL uses SF6 as an insulating medium. Due to unavoidable gas leakages and high global warming potential of SF6, there is a need to replace this insulating gas by some other possible alternative. Insulating foam materials are characterized by excellent dielectric properties as well as their reduced weight. These materials can find their application in GIL as high voltage insulators. Syntactic foam is a polymer based insulating foam. It consists of a large number of microspheres embedded in a polymer matrix. The work in this thesis deals with the development of the selection proce-dure for an insulating foam for its application in GIL. All the steps in the process are demonstrated considering syntactic foam as an insulator. As the first step of the procedure, a small representative model of the insulating foam is built in COMSOL Multiphysics software with the help of AutoCAD and Excel VBA to analyze electric field distribution for the application of GIL. The effect of the presence of metal particles on the electric field distribution is also observed. The AC voltage withstand test is performed on the insulating foam samples according to the IEEE standards. The effect of the insulating foam on electrical parameters as well as transmission characteristics of the line is analyzed as the last part of the thesis. The results from all the simulations and AC voltage withstand test are ob-served to predict the suitability of the syntactic foam as an insulator in GIL.
Dissertation/Thesis
Masters Thesis Electrical Engineering 2014
APA, Harvard, Vancouver, ISO, and other styles
6

Shafai, Leili. "Application of lattice gas automata to electromagnetic scattering and transmission line modelling." 2000. http://hdl.handle.net/1993/1935.

Full text
Abstract:
Lattice gas automata consist of particles within a lattice that interact with their nearest neighbours according to simple deterministic rules. Essential parts of the algorithm can be implemented in a few lines of code, while stability is maintained by the exact conservation of mass and momentum within the system, with no round-off errors. This thesis deals with the application of lattice gas automata for use in modelling two-dimensional homogeneous electromagnetic phenomena. The behaviour of the HPP lattice gas automaton has been shown to model conditions described by the two-dimensional linear wave equation. The application of the HPP-LGA algorithm to scattering experiments and transmission line modelling was explored in this thesis. The TLM method was used to assess the performance of the LGA data, as the implementation of the two algorithms in a computer environment is similar. Furthermore, as an established computational technique, simulation results obtained using the TLM method represented an "exact"solution with which to evaluate the data obtained by the LGA algorithm. Properties inherent to two-dimensional HPP-LGA are detailed through simple two-dimensional lattice gas experiments. These include the implementation of boundary conditions, system dissipation, and macroscopic averaging, as well as ensemble averaging of simulated data.
APA, Harvard, Vancouver, ISO, and other styles
7

Ray, Ayonam. "Developmental Studies On Separately Cooled Sheet Wound Gas Insulated Transformer - Modeling Of Electromagnetic Forces, Surge Voltage And Steady State Current Distribution In The Windings." Thesis, 1996. http://etd.iisc.ernet.in/handle/2005/1757.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Gas Insulated Transmission Line"

1

Koch, Hermann. Gas-Insulated Transmission Lines (GIL). Chichester, UK: John Wiley & Sons, Ltd, 2011. http://dx.doi.org/10.1002/9781119953081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Koch, Hermann. Gas insulated transmission line (GIL): A high power transmission technology. Hoboken, N.J: Wiley, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Associates, LSA. Environmental assessment: Southern California Gas Company natural gas transmission line 6902 project : Riverside and Imperial counties, California. Port Richmond, Calif: LSA Associates, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Associates, LSA. Modified environmental assessment no. CA-060-05-1: Southern California Gas Company natural gas transmission line 6902 revised border crossing location, Imperial County, California. Point Richmond, Calif: LSA Associates, Inc., 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

In the matter of the Ontario Energy Board Act and in the matter of application by the Consumers' Gas Company Ltd. for leave to construct transmission line in Parkway Belt West. [Toronto], Ont: The Board, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

In the matter of applications by ICG Utilities (Ontario) Ltd for leave to construct a transmission line and for a certificate of public convenience and necessity for the township of the front of Leeds and Lansdowne and to restrict the certificate of public convenience and necessity granted to the Consumers Gas Company Ltd. [Toronto], Ont: The Board, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koch, Hermann. Gas Insulated Transmission Lines (GIL). Wiley & Sons, Incorporated, John, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Koch, Hermann. Gas Insulated Transmission Lines (GIL). Wiley & Sons, Incorporated, John, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Koch, Hermann. Gas Insulated Transmission Lines (GIL). Wiley & Sons, Limited, John, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wallula Power Project and Wallula-McNary Transmission Line Project final environmental impact statement. [Olympia, Wash.]: Washington State Energy Facility Site Evaluation Council, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Gas Insulated Transmission Line"

1

Du, Boxue, Jianan Dong, Jin Li, Mingyang Wang, and Zhaoyu Ran. "Insulation Design of Superconducting Gas Insulated Transmission Line." In Polymer Insulation Applied for HVDC Transmission, 587–604. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yadam, Yugandhara Rao, Sarathi Ramanujam, and Kavitha Arunachalam. "Modelling the Propagation of Partial Discharge Signals Inside Gas Insulated Transmission Line Sections." In Lecture Notes in Mechanical Engineering, 203–10. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0186-6_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Koch, Hermann, and Günther Schöffner. "N2/SF6 gas Mixtures — Large Scale Application in Gas-Insulated Transmission Lines (GIL)." In Gaseous Dielectrics X, 329–37. Boston, MA: Springer US, 2004. http://dx.doi.org/10.1007/978-1-4419-8979-6_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yao, Hang, Boxue Du, Jin Li, and Zehua Wang. "Surface Functionally Graded Insulator for High Voltage Gas Insulated Apparatus." In Polymer Insulation Applied for HVDC Transmission, 549–68. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Boya, and Guixin Zhang. "Surface Charge Accumulation on Insulators in HVDC Gas-Insulated Systems: Measurement, Characteristics, and Suppression." In Polymer Insulation Applied for HVDC Transmission, 365–95. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9731-2_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ma, G., W. Qin, C. Shi, H. Zhou, Y. Li, and C. Li. "Electrical Discharge Localization for Gas Insulated Line Based on Distributed Acoustic Sensing." In Lecture Notes in Electrical Engineering, 606–14. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31676-1_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Jingzhuo, Xishan Wen, Wei Li, Hailiang Lu, and Yu Liu. "Analysis of Electromagnetic Interference Effects on Gas Pipelines Due to a Nearby Parallel UHV Transmission Line." In Proceedings of the Second International Conference on Mechatronics and Automatic Control, 441–47. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-13707-0_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Gas-Insulated Transmission Line." In Electric Power Substations Engineering, 327–66. CRC Press, 2016. http://dx.doi.org/10.1201/9781420007312-22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Koch, Hermann. "Gas-Insulated Transmission Line." In Electrical Engineering Handbook. CRC Press, 2007. http://dx.doi.org/10.1201/9781420007312.ch18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Koch, Hermann. "Gas-Insulated Transmission Line." In Electric Power Substations Engineering, 355–97. CRC Press, 2017. http://dx.doi.org/10.1201/b12061-18.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gas Insulated Transmission Line"

1

Koch, H. "Gas-Insulated Line (GIL) of the 2." In Seventh International Conference on AC and DC Transmission. IEE, 2001. http://dx.doi.org/10.1049/cp:20010515.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Koch, Hermann. "GAS Insulated Transmission Lines - GIL." In 2007 IEEE Power Engineering Society General Meeting. IEEE, 2007. http://dx.doi.org/10.1109/pes.2007.385745.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Koch, H. "Gas insulated transmission lines - GIL." In 2006 IEEE Power Engineering Society General Meeting. IEEE, 2006. http://dx.doi.org/10.1109/pes.2006.1709116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Koch, Hermann. "Gas insulated transmission lines - GIL." In Exposition. IEEE, 2008. http://dx.doi.org/10.1109/tdc.2008.4517312.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Koch, Hermann. "Gas insulated transmission lines - GIL." In Exposition. IEEE, 2008. http://dx.doi.org/10.1109/tdc.2008.4517313.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Yuyao, Chunyan Zang, Long Jiang, Xueshen Hu, Yulu Gong, and Zishan Zhang. "Analysis on Common Faults of Gas Insulated Transmission Line." In 2020 4th International Conference on HVDC (HVDC). IEEE, 2020. http://dx.doi.org/10.1109/hvdc50696.2020.9292779.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kobayashi, Takuto, Tetsu Shioiri, Shigeyasu Matsuoka, Akiko Kumada, and Kunihiko Hidaka. "Feasibility study of flexible gas-insulated transmission line using CF3I gas mixture." In 2020 IEEE 3rd International Conference on Dielectrics (ICD). IEEE, 2020. http://dx.doi.org/10.1109/icd46958.2020.9341911.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wenjia, XU, and XIANG Zutao. "Influence of Gas-Insulated Transmission Line (GIL) on Energization Overvoltage." In 2018 International Conference on Power System Technology (POWERCON). IEEE, 2018. http://dx.doi.org/10.1109/powercon.2018.8602353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Poehler, S., and P. Rudenko. "Directly buried gas-insulated transmission lines (GIL)." In 2012 IEEE/PES Transmission and Distribution Conference and Exposition (T&D). IEEE, 2012. http://dx.doi.org/10.1109/tdc.2012.6281707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Khan, Danish, Muhammad Rafiq, Syed Furqan Rafique, Idris Khan, and Farukh Abbas. "Comparison of transmission losses and voltage drops of GIL(Gas Insulated transmission line) and overhead transmission lines." In 2014 16th International Power Electronics and Motion Control Conference (PEMC). IEEE, 2014. http://dx.doi.org/10.1109/epepemc.2014.6980666.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Gas Insulated Transmission Line"

1

Hutsel, Brian Thomas, Brian S. Stoltzfus, William E. Fowler, Keith R. LeChien, Michael G. Mazarakis, James K. Moore, Thomas D. Mulville, et al. Millimeter-Gap Magnetically Insulated Transmission Line Power Flow Experiments. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1323370.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Gas Insulated Transmission Line' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography