Relevant bibliographies by topics / Gas steam boiler

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Gas steam boiler'

Author: Grafiati
Published: 28 June 2021
Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gas steam boiler.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gas steam boiler"

1

Ernest, Akerekan Opeyemi, and Oyim Akachukwu David. "Boiler Efficiency Analysis of A 220mw Steam Power Plant Using Direct Method." International Journal of Research and Scientific Innovation 09, no. 08 (2022): 111–16. http://dx.doi.org/10.51244/ijrsi.2022.9802.

Full text
Abstract:
This paper presents a boiler efficiency analysis of a 220MW steam power plant using the direct method. The procedure employed to determine the boiler efficiency was done using the input-output method based on ASME PTC 4.1 standard. The experimental data used for the analysis were obtained from boilers installed in Egbin Thermal Power Plant located at Ikorodu, Lagos, Nigeria. Instantaneous data on boiler thermal efficiency can determine the condition of boiler operation, heat generation, and heat loss. It was established that boilers#-1, 2, 4, 5, and 6 have 72.51%, 67.66%, 69.50%, 78.16%, and 7
APA, Harvard, Vancouver, ISO, and other styles
2

Tuński, Tomasz, Cezary Behrendt, and Marcin Szczepanek. "Mathematical Modeling of the Working Conditions of the Ship’s Utilization Boiler in Order to Evaluate Its Performance." Energies 12, no. 16 (2019): 3105. http://dx.doi.org/10.3390/en12163105.

Full text
Abstract:
The paper presents a mathematical model allowing the determination of the amount of saturated steam produced in marine water tube boilers and smoke tube boilers. The mathematical model includes the impact of the exhaust gas temperature and its amount, ambient temperature, engine power load, and location of boiler tubes. In addition to the amount of steam generated in a boiler, it is also feasible to establish flow resistance of the exhaust gas in the boiler determined by the boiler tubes’ arrangement and the thickness of scale deposits and the exhaust gas temperature after the exhaust gas boil
APA, Harvard, Vancouver, ISO, and other styles
3

Ridwan, Abrar Bin, and Zaki Anwar. "Boiler efficiency with mixed methane fuel gas calculation." Jurnal Polimesin 22, no. 5 (2024): 559. http://dx.doi.org/10.30811/jpl.v22i5.5456.

Full text
Abstract:
A boiler is a pressurized vessel utilized for the production of high-temperature steam. An often-encountered problem in boiler systems is the inefficiency of the working system, especially in fire tube boilers where heat loss occurs in the steam and fuel systems, leading to a decrease in efficiency. Hence, it is imperative to compute the efficiency of fire tube boilers in order to comply with efficiency regulations in operational procedures in the field. This study utilizes indirect methods to calculate efficiency. The calculation results indicate that the boiler efficiency, determined using t
APA, Harvard, Vancouver, ISO, and other styles
4

Stamenković, Ognjen, Goran Stupar, Dragan Tucaković, and Bojan Bošković. "Detection of cause of pipe burst in economizer of process CO steam boiler." Tehnika 77, no. 1 (2022): 55–69. http://dx.doi.org/10.5937/tehnika2201055s.

Full text
Abstract:
In this paper results of analysis of process steam boiler operation with maximum continuous steam production of 75 t/h, steam pressure and temperature of 45,5 bar and 412 oC are presented. Steam boiler is predicted to operate within steam production facility of oil and gas refinery in Pančevo, Serbia. On the demand of purchaser steam boiler is enabled to operate with various fuels as well as with two or three fuels simultaneously. By fuels intake facilities it is enabled to introduce refinery gas, fuel oil and high-temperature waste gas to the boilers furnace. Waste gas is guided from FCC (Fue
APA, Harvard, Vancouver, ISO, and other styles
5

Thamrin, Ismail, and K. Novaldo. "COMPARISON SPIRAL PIPE WITH ROUND PIPE FOR HEAT TRANSFER IN BOILER GAS TURBINE." Indonesian Journal of Engineering and Science 1, no. 1 (2020): 039–44. http://dx.doi.org/10.51630/ijes.v1i1.8.

Full text
Abstract:
The increasing need for energy requires finding alternative energy. Sawdust is wate but can be utilised as alternative energy. The sawdust is used as a boiler fuel called biomass. However, the utilization of sawdust as a boiler fuel is considered less effective. Presumably heat and mass transfer of steam for boiler system using spiral pipes. Since the length of steam distribution becomes long so that the heat transfer from boiler to pipes takes a long time. Thus, this study examines the effect of spiral pipes for the heat transfer process for boilers, where the steam is supplied to rotate the
APA, Harvard, Vancouver, ISO, and other styles
6

S, Samsudin, and Nuraini A. Aziz. "Operation of Reheat Steam Temperature Control Concept in Sub Critical Boiler: Operational Review Practices and Methodology." International Journal of Engineering & Technology 7, no. 4.28 (2018): 358–63. http://dx.doi.org/10.14419/ijet.v7i4.28.22615.

Full text
Abstract:
In subcritical boilers, spray water system and feed water flow are applied to control the superheated steam temperature. Meanwhile, for reheat steam temperature control, many methods are being adopted namely burner tilt, gas recirculation, and excess air and steam bypass as primary control and feed water is envisaged as an emergency control. In a large boiler operation, the boiler is operated in sliding pressure mode the cold reheat steam temperature is higher compared to constant pressure operation. To ensure the correct temperature control for reheat steam with high pressure, the right meth
APA, Harvard, Vancouver, ISO, and other styles
7

Bulygin, Yu I., I. N. Loskutnikova, A. V. Budovskiy, V. P. Greshnova, and V. V. Chernikov. "Analysis and Assessment of Fire and Explosion Safety of a Block-Modular Boiler House Using an Alternative Coolant." Occupational Safety in Industry, no. 6 (June 2023): 7–16. http://dx.doi.org/10.24000/0409-2961-2023-6-7-16.

Full text
Abstract:
Currently, boiler installations, in which high-temperature mineral or synthetic oil is used as a coolant, are an alternative to industrial steam boilers with superheated steam as a source of process heat. The advantages of the technological and economic nature of the introduction of block-modular boilers into the energy industry with the use of alternative working bodies should be combined with the solution of issues of ensuring their safe operation. The article ranks technological advantages, as well as hazards by the type of coolant used in the thermal oil, steam, and hot water boilers. Diff
APA, Harvard, Vancouver, ISO, and other styles
8

Lestari, Dian Dwi, Isdaryanto Iskandar, and Wendi Wendi. "ANALYSIS THE EFFICIENCY OF BOILER 2011 UA WATER TUBE TYPE AT PT PERTAMINA RU III (PERSERO) PLAJU." International Journal of Social Science 2, no. 4 (2022): 1865–72. http://dx.doi.org/10.53625/ijss.v2i4.4164.

Full text
Abstract:
One of the most important tools in steam production in the oil and gas industry is a boiler. Along with the increasing demand for steam, it is necessary to think about ways to increase the efficiency of the boiler. A boiler or steam boiler is a closed vessel-shaped device used to produce steam or steam. Boilers are designed to transfer heat from a combustion source. With Used the direct method (Direct Method) to calculate boiler efficiency. The pressure and temperature data of the feed water and steam is processed through the data interpolation process to obtain the enthalpy value of the feed
APA, Harvard, Vancouver, ISO, and other styles
9

Bezhan, V. A., V. M. Zhytarenko, and P. Dalakov. "Energy Characteristics of Medium Pressure Steam Boilers." Journal of Engineering Sciences 7, no. 2 (2020): F8—`F14. http://dx.doi.org/10.21272/jes.2020.7(2).f2.

Full text
Abstract:
The object of this study is the thermal and energy characteristics of medium pressure boilers of СНPP-1, four boilers CKTI-75/39F-2-4 and two boilers TP-150-2. All boilers operate on a common steam collector of 32 atm, at 420 °С. Fuel is a mixture of blast furnace gas and natural gas in the ratio of 0.7-0.9 volume particles. The characteristics of the blast furnace gas are not constant: the elemental composition, humidity, and dustiness of blast furnace gas change significantly. Analysis of operation of CHPP-1 medium pressure boilers of OJSC “Mariupol Metallurgical Combinat named after P. G. I
APA, Harvard, Vancouver, ISO, and other styles
10

Ponomarenko, Y., M. Katkov, and R. Semenenko. "INTEGRATED ASSESSMENT OF ENVIRONMENTAL AND ECONOMIC EFFICIENCY OF GAS BOILER OPERATING MODES." Municipal economy of cities 4, no. 157 (2020): 127–33. http://dx.doi.org/10.33042/2522-1809-2020-4-157-127-133.

Full text
Abstract:
A thermal energy is one of the most significant sources of environmental impact.This is a consequence of both the use of mostly non-renewable natural resources and environmental pollution from thermal power plants. The intensity of this impact depends on many factors, namely the purpose, power, type of fuel used and operating mode. Existing studies have established links between emissions and characteristics such as power and fuel type for stationary operating conditions. At the same time, changes in operating conditions have a significant impact on environmental and economic characteristics.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Gas steam boiler"

1

Kuriál, Jakub. "Návrh parního plynového kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417512.

Full text
Abstract:
This thesis deals with a design of a steam boiler combusting natural gas. It consists of stoichiometric calculation, determination of boiler efficiency, thermal calculations and determining geometric parameters of the boiler and its heat transfer surfaces. The results are verified by the heat balance of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
2

Vacek, Jiří. "Návrh parního plynového kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443175.

Full text
Abstract:
The aim of this thesis is a draft of a gas steam boiler with steam output of 200 t/h. The first part of the paper provides stoichiometric calculations, then there are calculations of the dew point, boiler efficiency and the amount of gas. After that, calculations and a draft of the combustion chamber are carried out and then heat balances are drafted. In the following text, geometric properties of individual heat exchanging surfaces are drafted. At the end, there are control calculations. This thesis contains a blueprint of the gas steam boiler.
APA, Harvard, Vancouver, ISO, and other styles
3

Sedlák, Petr. "Vertikální kotel na spalování zemního plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232153.

Full text
Abstract:
This master´s thesis is dealing with the thermal calculation and design of boilers for natural gas combustion. The aim is to design the heating surfaces, so as to meet the requirements of the steam temperature of 490 ° C, the pressure of 7 MPa and the steam output of 60 t/h.
APA, Harvard, Vancouver, ISO, and other styles
4

Daubner, Tomáš. "Návrh parního kotle na spalování zemního plynu, parametry páry 170 t/h, 6,7 MPa, 485°C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231668.

Full text
Abstract:
The topic of master thesis is the thermal calculation and proportion design of gas-fired steam boiler. The first part describe technical characteristics and parameters of the boiler. The main part of this thesis is the thermal calculation of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
5

Růžička, Tomáš. "Tepelný výpočet parního kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230433.

Full text
Abstract:
The topic of this thesis is the thermal calculation of steam boiler with natural gas fuel. The first part is describing technical characteristic and parametres of the boiler. The main part of this thesis is the thermal calculation of the boiler. The following part deals with determination of steam amount and steam parametres for blowing through pipes of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
6

Mandelík, Ladislav. "Kotel na spoluspalování plynů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378706.

Full text
Abstract:
The topic of this diploma thesis is to design the co-firing of blast furnace gas and coke-oven gas. First, the stoichiometric calculation for the gas mixture was made. It is followed with the determination of basic measures of heating surfaces and with their thermal calculation. The part of the work is also the drawing documentation of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
7

Šenovský, Petr. "Parní kotel s přihříváním páry na spalování vysokopecního plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231184.

Full text
Abstract:
The aim of this Diploma thesis is design of steam boiler with steam reheating, for combustion the blast furnace gas. The fuel composition and primary parameters for calculation of the boiler were provided. In the first part the fuel composition is described. The main part of the thesis consists of stoichiometric calculations, establishing efficiency of the boiler, calculating combustion chamber as well as design and calculation individual heating surfaces. Part of the work is also drawing documentation of boiler.
APA, Harvard, Vancouver, ISO, and other styles
8

Žaloudek, Martin. "Plynový kotel na zemní plyn 170t/h." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hatiar, Peter. "Návrh parního kotle na odpadní teplo 0,8Nm3/s, 450°C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230888.

Full text
Abstract:
This master’s thesis deals with the issue of design heat recovery steam generator. In the first part is realized calculation of stoichiometry and further the thermal balance of the boiler. The boiler was divided on the basis of thermal analysis in two heating surfaces that have been designed separately. The thesis also includes structural design and drawings of evaporator, economizer and their compilation.
APA, Harvard, Vancouver, ISO, and other styles
10

Šebela, Jakub. "Návrh kotle na spoluspalování zemního plynu a vysokopecního plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241871.

Full text
Abstract:
The aim of a diploma thesis is design of draft boiler for co-firing blast furnace gas and natural gas. In the first part is made the stoichiometric calculation for the gas mixture. Next is the proposal of combustion chamber and proposal of individual heating surfaces of boiler. Next part contains the thermal calculation and control of individual heating surfaces. Part of the work is also drawing documentation of boiler.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Gas steam boiler"

1

Kuznecov, Vyacheslav, and Oleg Bryuhanov. Gasified boiler units. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1003548.

Full text
Abstract:
The textbook gives the basic concepts of gasified heat generating (boiler) installations and the terminology used in boiler technology, the principle of operation and device of gasified heat generating (boiler) installations. The types and device of heat generators (boilers) of their furnace devices are considered; types and device of gas-burning devices, the number and places of their installation in furnace devices; auxiliary equipment-devices for air supply and removal of combustion products, devices for water treatment, steam supply and circulation of the coolant of hot water boilers; devi
APA, Harvard, Vancouver, ISO, and other styles
2

American Society of Civil Engineers. Air and Gas Duct Structural Design Committee., ed. The structural design of air and gas ducts for power stations and industrial boiler applications. American Society of Civil Engineers, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Russia) Vsesoi͡uznai͡a nauchno-tekhnicheskai͡a konferent͡sii͡a Problemy aėrodinamiki gazovozdushnykh traktov kotelʹnykh agregatov (1989 Barnaul. Problemy aėrodinamiki gazovozdushnykh traktov kotelʹnykh agregatov: Vsesoi͡uznai͡a nauchno-tekhnicheskai͡a konferent͡sii͡a, 10-12 okti͡abri͡a 1989 g. : tezisy dokladov. Altaĭskiĭ politekhnicheskiĭ in-t im. I.I. Polzunova, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

R, Jones A., and Institute of Physics (Great Britain). Combustion Physics Group., eds. Deposition from combustion gases: Proceedings of a one-day meeting of the Combustion Physics Group of The Institute of Physics, 4. October 1989, Marchwood, Southampton, in association with the Institute of Energy, The Combustion Institute, The Institution of Chemical Engineers. Institute of Physics, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

R, Jones A., and Institute of Physics (Great Britain). Combustion Physics Group., eds. Deposition from combustion gases: Proceedings of a one-day meeting of the Combustion Physics Group of the Institue of Physics, 4 October 1989, Marchwood, Southampton. IOP [for] Institute of Physics, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

E, Hesketh Howard, Cross Frank L, and Quigley John T, eds. Emission control from industrial boilers. Technomic Pub., 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Structural Design of Air and Gas Ducts for Power Stations and Industrial Boiler Applications. American Society of Civil Engineers, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hutton, William. Hot Water Supply and Kitchen Boiler Connections: A Text Book On the Installation of Hot Water Service in Residences and Other Buildings and Methods of ... Range Boilers, Steam and Gas Water Heaters. Franklin Classics, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hutton, William. Hot Water Supply and Kitchen Boiler Connections: A Text Book on the Installation of Hot Water Service in Residences and Other Buildings and Methods of Connecting Range Boilers, Steam and Gas Water Heaters. Creative Media Partners, LLC, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hot Water Supply and Kitchen Boiler Connections: A Text Book on the Installation of Hot Water Service in Residences and Other Buildings and Methods of Connecting Range Boilers, Steam and Gas Water Heaters. Creative Media Partners, LLC, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Gas steam boiler"

1

Azubuike, Uchenna, Howard Njoku, and Onyemaechi Ekechukwu. "Parametric Effects on Advanced Exergy and Exergoeconomics of a Gas-Fired Steam Power Plant Boiler." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-82979-6_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pozdeev, V. A., E. A. Kravetc, K. E. Zhilin, D. O. Andreichuk, and D. V. Loginov. "Study of the Causes of the Gas Imbalance in High Capacity Steam Boilers." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9376-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mollitor, Barrie, and William L. Lowry. "Section VII—Recommended Guidelines for the Care of Power Boilers." In Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1, Sixth Edition. ASME Press, 2023. http://dx.doi.org/10.1115/1.886519_ch2.

Full text
Abstract:
Abstract This chapter covers ASME Boiler and Pressure Vessel Code Section VII, which presents guidelines for safe, reliable operation as well as avoiding unsafe conditions in power boilers. The guidelines apply to power boilers that produce steam for external use at a pressure exceeding 15 psig from the application of heat, which come from the combustion of fuels, from various hot waste gases, or from the application of electrical energy. The bulk of this chapter is devoted to the discussion on Subsection 1 of Section VII, which contains information about industrial, gas- or oil-fired, watertu
APA, Harvard, Vancouver, ISO, and other styles
4

B. Hytken, Kent. "Downhole Steam Generation for Heavy Oil and Oil Sands Production." In Advances in Energy Recovery and Efficiency Technologies [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1005737.

Full text
Abstract:
Steam injection lowers the viscosity of heavy oil and oil sands trapped in underground formations. Steam injection is one of the most reliable thermal-enhanced oil recovery methods for heat introduction. Conventional steam applications generate steam from an inefficient high-pressure boiler, which has significant heat losses, degradation in steam quality, and uncertainty in steam distribution in the reservoir while emitting greenhouse gas emissions into the environment. In contrast to the high-pressure steam boiler, a downhole steam generator provides a step-change improvement with immense pot
APA, Harvard, Vancouver, ISO, and other styles
5

Smith, Clayton T. "ASME Section IV: Rules for the Construction of Heating Boilers." In Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1, Sixth Edition. ASME Press, 2023. http://dx.doi.org/10.1115/1.886519_ch18.

Full text
Abstract:
Abstract This chapter presents the rules of the ASME Boiler and Pressure Vessels Code, Section IV, constituting the minimum requirements for the safe design, construction, installation, and inspection of low-pressure steam boilers and hot-water Boilers (which are directly fired with oil, gas, electricity, or other solid or liquid fuels). It is divided into five parts and two sub-parts including several appendices. Part HG addresses the material requirements, design, pressure-relieving devices, tests, inspection, stamping, instruments, fittings and controls, and the installation of low-pressure
APA, Harvard, Vancouver, ISO, and other styles
6

Smith, Clayton T. "ASME Section VI: Recommended Rules for the Care and Operation of Heating Boilers." In Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1, Sixth Edition. ASME Press, 2023. http://dx.doi.org/10.1115/1.886519_ch19.

Full text
Abstract:
Abstract This chapter provides criteria and commentary for ASME Section VI, which presents guidelines for the safe and efficient operation of steam-heating boilers, hot-water-supply boilers, and hot-water-heating boilers after installation. These rules are nonmandatory unless they are adopted into the laws of a governmental jurisdiction. The chapter is divided into nine parts, along with the necessary figures and tables for each part. Part 1 covers the scope of the chapter, provides some background on the use of illustrations and manufacturer’s information, and includes a glossary of terms app
APA, Harvard, Vancouver, ISO, and other styles
7

Bararzadeh Ledari, Masoumeh, and Reza Bararzadeh Ledari. "Nature as a Teacher for Abiota Self-Organization in Terms of Entropy Analysis." In Exergy - New Technologies and Applications [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.109817.

Full text
Abstract:
In this chapter, the various terms of entropy generation in terrestrial systems and the atmosphere are estimated by imitating the entropy analysis of a steam power generation (STPG). The highest entropy generation is associated with the outgoing longwave radiation flux (more than 20–200 times the downward solar radiation). The results indicate that the most significant terms of entropy generation (heat dissipation) in different processes are related to latent and sensible heat fluxes (similar to steam generation and flue gas of the STPG). The vegetation cover (boiler system) destroys a part of
APA, Harvard, Vancouver, ISO, and other styles
8

Fenton, Roy. "Refining the steam bulk carrier." In The Evolution and Significance of the Powered Bulk Carrier. Liverpool University Press, 2023. http://dx.doi.org/10.3828/liverpool/9781802078596.003.0003.

Full text
Abstract:
The earliest screw colliers were largely operated by those in the coal industry, who were willing to invest in them to obtain large and valuable contracts from gas works. This chapter details technological advances in marine engineering and in shipbuilding which made operating screw colliers an economic proposition for those who made ship owning their living. The critical improvement was to the marine boiler, where increases in steam pressure gave major gains in efficiency. To grasp this dividend, developments in engine design saw the adoption of compounding, with two- and later three-stage ex
APA, Harvard, Vancouver, ISO, and other styles
9

Bahadori, Alireza. "Steam boilers." In Essentials of Oil and Gas Utilities. Elsevier, 2016. http://dx.doi.org/10.1016/b978-0-12-803088-2.00004-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

HAZLEHURST, J. "Steam Boilers." In Tolley's Industrial and Commercial Gas Installation Practice. Elsevier, 2009. http://dx.doi.org/10.1016/b978-1-85617-672-9.10008-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gas steam boiler"

1

Saleem, M. A., and A. A. Hulaibi. "Boiler Tube Failures and Integrity Assessment." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08436.

Full text
Abstract:
Abstract Process industries such as Oil, Gas and Petrochemical plants have boilers as part of the steam generating system. A boiler is a complex and critical piece of equipment and its reliability is crucial to the entire plants operation. Several components of boiler play a major role in contributing to its reliability and performance. Of these, boiler tubes are considered, the most vulnerable component to corrosion in steam generating units. The corrosion concerns and the failure mode of boiler tubes can sometimes be unique to a plant and the control of corrosion is made a challenging task d
APA, Harvard, Vancouver, ISO, and other styles
2

Costa, S. T., and J. L. Walker. "The Value of Sodium Monitoring." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91217.

Full text
Abstract:
Abstract The need to know the contaminant level of steam has been met by the on-line use of a continuous analyzer based on a sodium ion-specific electrode. But while such an instrument provides the accuracy and sensitivity required, it does not assure reliable results unless the sample being delivered to the electrode is truly representative of the stream being evaluated. Correct sample collection and delivery procedures must be strictly followed. Boiler water carryover consists of liquid and vaporous carryover. Sodium will accurately assess the liquid carryover of industrial boilers, but the
APA, Harvard, Vancouver, ISO, and other styles
3

Zaidi, Syed Rehan, and Husin Sitepu. "Characterization of Corrosion Products in Oil and Gas Facilities Using X-ray Powder Diffraction Method." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11393.

Full text
Abstract:
Abstract The failures of boiler tubes have consistently occurred in the Refinery (Ras Tanura, Jiddah and Riyadh) and gas plants (Ju’aymah and Shedgum). The Research and Development Center (R&DC) has helped the plant engineers to overcome the problems by identifying the nature and source of compounds (e.g., corrosion products, formation materials and scale deposits). The boiler consists of a furnace, boiler tubes, steam drum, mud drum and boiler. The furnace usually provides heat to the boiler and then changes water into steam. Here are the problems on why boiler tubes failed. The presence
APA, Harvard, Vancouver, ISO, and other styles
4

Lopez-Lopez, D., and A. Wong-Moreno. "Unusual Refinery Boiler Tube Failures Due to Corrosion by Sulfuric Acid Induced by Steam Leaks." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98720.

Full text
Abstract:
Abstract Corrosion by sulfuric acid in boilers is a low probability event because gas temperature and metal temperature of boiler tubes are high enough to avoid the condensation of sulfuric acid from flue gases. This degradation mechanism is frequently considered as an important cause of air preheaters materials degradation, where flue gases are cooled by heat transfer to the combustion air. Corrosion is associated to the presence of sulfuric acid, which condensates if metal temperature (or gas temperature) is below of the acid dew point. In economizer tubes, sulfuric acid corrosion is an unli
APA, Harvard, Vancouver, ISO, and other styles
5

Almasi, Hojjatolah, Fatemeh Namazi, Ahmad Kamali, and Neda Deris. "Failure Analysis and Investigation Methods of Reboiler Tubes Corrosion/Case Study." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07188.

Full text
Abstract:
Abstract The observation of corrosion on interior tube side of depropaniser Reboiler, stabilizer Reboiler, low pressure, high pressure steam condenser, air cooler, steam drum and pipe of boiler during gas refinery plant shut down, leads to have a survey of steam loop condition. Borescopic inspection images in boiler, depropaniser Reboiler and air cooler tube were the same, so it can be concluded that the corrosion mechanism probably is the same. Since observed pitting on tubes reveals sign of oxygen corrosion, the oxygen concentration of generated steam and condensate steam were investigated.
APA, Harvard, Vancouver, ISO, and other styles
6

Krause, H. H., and I. G. Wright. "Boiler Tube Failures in Municipal Waste-To-Energy Plants: Case Histories." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95561.

Full text
Abstract:
Abstract Waste-to-energy plants experienced boiler tube failures when the design changed from waste-heat boilers to radiant furnace waterwalls with superheat, adopted from coal-firing technology. The fireside attack by chlorine and sulfur compounds in the refuse combustion products caused many forced outages in early European plants with high steam temperatures and pressures. In spite of conservative steam conditions in the first U.S. plants, some failures occurred. As steam temperatures increased in later U.S. plants, corrosion problems multiplied. Over the years these problems have been alle
APA, Harvard, Vancouver, ISO, and other styles
7

Mort, Tony, Michael E. Rogers, Bernard Skinner, and Richard Parson. "Co Boiler Reliability: Examination of Failure Mechanisms, Root Causes Corrective Actions and Monitoring Required." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95620.

Full text
Abstract:
Abstract The waste gas streams from Upgrading processes pass as primary energy sources to two CO boilers. As Upgrading feedrates have increased, the volume flowrate, and properties of the streams have changed to such extent that the boilers have suffered severe reliability problems due to the new, and adverse fireside conditions. Heat flux rates have increased in critical sections of the boiler with consequent disruption in thermal hydraulic flow in water and steam circuits. Departure from nucleate boiling (DNB) and steam blanketing in generating bank tubes have resulted, causing treatment che
APA, Harvard, Vancouver, ISO, and other styles
8

He, Shengjie, Wentao Zhang, Jingbiao Yang, Zhongxun Zhao, and Gang Xu. "Analysis of corrosion causes of low-pressure pipeline in a gas-steam combined cycle waste heat boiler." In International Conference on New Materials, Machinery, and Vehicle Engineering 2024, edited by Jinyang Xu and J. Paulo Davim. SPIE, 2024. http://dx.doi.org/10.1117/12.3055271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yoo, Il, Omar El Sinnary, Ashwaq Al Jasmi, et al. "Limitations of the Old Generation Water and Steam Cycle Chemistry Treatment: Highlighting Corrosion Issues and Proposing Advanced Treatment Options." In MECC 2023. AMPP, 2023. https://doi.org/10.5006/mecc2023-20108.

Full text
Abstract:
Abstract This study provides an extensive analysis of the limitations for the old generation of water and steam cycle chemistry used in boiler water treatment, using a case study of an operational gas plant running since 1977. Key failures observed included hydrogen damage (HD), high temperature stress rupture, and acid phosphate corrosion, all attributable to heavy deposits resulting from outdated boiler water chemical control program. These failures impact process production, boiler performance, and safety, prompting the need for improved treatment options. The paper recommends transitioning
APA, Harvard, Vancouver, ISO, and other styles
10

Maitra, Debajyoti, Brian A. Baker, and Gaylord Smith. "Oxidation Behavior of Candidate Alloys for Advanced-Ultra Super Critical Boiler Application." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02280.

Full text
Abstract:
Abstract Power generation from coal using Advanced-Ultra Supercritical (A-USC) steam conditions will result in further improvement of fuel efficiency and decreased greenhouse gas emissions. The steamside oxidation resistance of the candidate alloys for an A-USC application is an important consideration in selecting an alloy for superheater and reheater tubing, the header and transfer piping. The concern is that steamside oxidation could potentially lead to wall loss compromising structural integrity as well as act as an insulating barrier to heat transfer. Moreover, loose scales can also lead
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Gas steam boiler' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography