Academic literature on the topic 'Gassing power'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gassing power.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gassing power"

1

Borzani, Walter. "Measurement of the gassing power of bakers' yeast: correlation between the dough volume and the incubation time." Brazilian Archives of Biology and Technology 47, no. 2 (2004): 213–17. http://dx.doi.org/10.1590/s1516-89132004000200008.

Full text
Abstract:
An empirical equation is proposed to correlate the dough volume and the incubation time during cylinder tests using thin flour dough carried out to evaluate the gassing power of compressed yeast. The above equation permitted to correlate the gassing power of the yeast and the proof time, as well as to calculate the specific rate of the dough volume variation at any time. It provided more information regarding the fermentation power of the yeast than the sole value of its gas-producing power. A physical interpretation of the proposed equation is presented.
APA, Harvard, Vancouver, ISO, and other styles
2

Amalanathan, Arputhasamy Joseph, Ramanujam Sarathi, Maciej Zdanowski, Ravikrishnan Vinu, and Zbigniew Nadolny. "Review on Gassing Tendency of Different Insulating Fluids towards Transformer Applications." Energies 16, no. 1 (2023): 488. http://dx.doi.org/10.3390/en16010488.

Full text
Abstract:
This paper reports the critical reviews on the gassing tendency of different insulating fluids along with the precautionary measures to be considered during their fault diagnosis in transformer insulation. The experimental techniques and procedures for identifying the gassing due to electrical and thermal stress along with the stray gassing phenomenon has been elucidated. The different interpretation schemes used for determining the faults in transformers results in unexpected errors when the historical data relating to mineral oil is used for the other alternative fluids. Mineral oil and natu
APA, Harvard, Vancouver, ISO, and other styles
3

Teunissen, Aloys, Françoise Dumortier, Marie-Françoise Gorwa, et al. "Isolation and Characterization of a Freeze-Tolerant Diploid Derivative of an Industrial Baker's Yeast Strain and Its Use in Frozen Doughs." Applied and Environmental Microbiology 68, no. 10 (2002): 4780–87. http://dx.doi.org/10.1128/aem.68.10.4780-4787.2002.

Full text
Abstract:
ABSTRACT The routine production and storage of frozen doughs are still problematic. Although commercial baker's yeast is highly resistant to environmental stress conditions, it rapidly loses stress resistance during dough preparation due to the initiation of fermentation. As a result, the yeast loses gassing power significantly during storage of frozen doughs. We obtained freeze-tolerant mutants of polyploid industrial strains following screening for survival in doughs prepared with UV-mutagenized yeast and subjected to 200 freeze-thaw cycles. Two strains in the S47 background with a normal gr
APA, Harvard, Vancouver, ISO, and other styles
4

Shima, Jun, Akihiro Hino, Chie Yamada-Iyo, et al. "Stress Tolerance in Doughs of Saccharomyces cerevisiae Trehalase Mutants Derived from Commercial Baker’s Yeast." Applied and Environmental Microbiology 65, no. 7 (1999): 2841–46. http://dx.doi.org/10.1128/aem.65.7.2841-2846.1999.

Full text
Abstract:
ABSTRACT Accumulation of trehalose is widely believed to be a critical determinant in improving the stress tolerance of the yeastSaccharomyces cerevisiae, which is commonly used in commercial bread dough. To retain the accumulation of trehalose in yeast cells, we constructed, for the first time, diploid homozygous neutral trehalase mutants (Δnth1), acid trehalase mutants (Δath1), and double mutants (Δnth1 ath1) by using commercial baker’s yeast strains as the parent strains and the gene disruption method. During fermentation in a liquid fermentation medium, degradation of intracellular trehalo
APA, Harvard, Vancouver, ISO, and other styles
5

Lenhart, Brian, Saheed Adewale Lateef, Michael Zuraw, and William Earl Mustain. "A Scalable Method for Improving Zn Crystallinity for Low-Gassing Alkaline Batteries." ECS Meeting Abstracts MA2022-02, no. 64 (2022): 2347. http://dx.doi.org/10.1149/ma2022-02642347mtgabs.

Full text
Abstract:
The corrosion of zinc particles in alkaline environments is an energetically parasitic process that produces hydrogen gas as a byproduct. This “gassing” phenomenon is thermodynamically favorable in standard zinc-alkaline battery chemistries. Building hydrogen pressure within these primary cells can eventually lead to cell rupture, leaking the high-pH electrolyte and slurry from the cell, often destroying the electronic device that the cell was meant to power. One of the particle-level variables that can control the gassing and corrosion rate is the particle crystallinity. As the crystallinity
APA, Harvard, Vancouver, ISO, and other styles
6

Gélinas, P., L. Savoie, and N. Rodrigue. "Baker's yeast mitochondria, gassing power and freeze–thaw tolerance in dough." Food Microbiology 13, no. 1 (1996): 41–46. http://dx.doi.org/10.1006/fmic.1996.0005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gélinas, Pierre, and Carole McKinnon. "Baking tests: Effect of sucrose and water on yeast gassing power." Cereal Chemistry 95, no. 6 (2018): 822–28. http://dx.doi.org/10.1002/cche.10100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Siwale, Workson, Stefan Frodeson, Michael Finell, et al. "Understanding Off-Gassing of Biofuel Wood Pellets Using Pellets Produced from Pure Microcrystalline Cellulose with Different Additive Oils." Energies 15, no. 6 (2022): 2281. http://dx.doi.org/10.3390/en15062281.

Full text
Abstract:
Fuel wood pellets have the tendency of undergoing self-heating and off-gassing during storage and transportation. Self-heating can lead to spontaneous combustion and cause fires while toxic gasses such as carbon monoxide and some volatile organic compounds released due to off-gassing are a human health and environmental hazard. Previous research suggests that the self-heating and off-gassing of wood pellets are as a result of the oxidation of wood extractives. The aim of this study was to identify the extractives, i.e., fatty and resin acids that are responsible for the emissions of carbon mon
APA, Harvard, Vancouver, ISO, and other styles
9

Loiselle, Luc, U. Mohan Rao, and Issouf Fofana. "Gassing Tendency of Fresh and Aged Mineral Oil and Ester Fluids under Electrical and Thermal Fault Conditions." Energies 13, no. 13 (2020): 3472. http://dx.doi.org/10.3390/en13133472.

Full text
Abstract:
Operational factors are known to affect the health of an in-service power transformer and to reduce the capabilities and readiness for energy transmission and distribution. Hence, it is important to understand the degradation rate and corresponding behavioral aspects of different insulating fluids under various fault conditions. In this article, the behavior of mineral oil and two environmentally friendly fluids (a synthetic and a natural ester) are reported under arcing, partial discharges, and thermal fault conditions. Arcing, partial discharges and thermal faults are simulated by 100 repeat
APA, Harvard, Vancouver, ISO, and other styles
10

Duval, Michel, and Constantin Ene. "Identification of Stray Gassing of Dodecylbenzene in Bushings." Energies 14, no. 9 (2021): 2350. http://dx.doi.org/10.3390/en14092350.

Full text
Abstract:
Several high voltage condenser type OIP (oil impregnated paper) bushings used in the electrical industry are filled with dodecylbenzene, because of its ability to absorb hydrogen formed by corona partial discharges in the thick paper insulation of these pieces of equipment. Some of them form large quantities of ethane, raising the concern of overheating faults in their paper insulation, which may be risky for their safe operation in service. The article presents dissolved gas analysis results of oil samples taken from the bushings with high ethane formation, together with results of laboratory
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Gassing power"

1

Vrábel, Miroslav. "Měření parametrů laserových svazků." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219097.

Full text
Abstract:
his paper discusses the characteristics of laser radiation. Introduces the theory and in quite a description of the laser beam. To this end, experiments were compiled to measure the geometric and performance parameters, polarization and coherence. Emphasis is placed on the interdependence of the various parameters of laser radiation
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Gassing power"

1

Technical, AACC. "Measurement of Gassing Power by Volumetric Method." In AACC International Approved Methods. AACC International, 2009. http://dx.doi.org/10.1094/aaccintmethod-22-14.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Technical, AACC. "Measurement of Gassing Power by the Pressuremeter Method." In AACC International Approved Methods. AACC International, 2009. http://dx.doi.org/10.1094/aaccintmethod-22-11.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nascimento, Micael, Carlos Marques, and João Pinto. "Tracking Li-Ion Batteries Using Fiber Optic Sensors." In Smart Mobility - Recent Advances, New Perspectives and Applications [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.105548.

Full text
Abstract:
Batteries are being seen as a key technology for battling CO2 emissions from the transport, power, and industry sectors. However, to reach the sustainability goals, they must exhibit ultrahigh performance beyond their capabilities today. So, it is becoming crucial to develop advanced diagnostic/prognostic tools injected into the battery that could nonintrusively track in time and space its physical and chemical parameters, for ensuring a greater lifetime and therefore lower its CO2 footprint. In this context, a smart battery sensing system with high performance and easy implementation is criti
APA, Harvard, Vancouver, ISO, and other styles
4

Gasson-Gardner, Lisa. "Listening for the Power of the People: A Political Theology of Affect." In Political Theology on Edge. Fordham University Press, 2021. http://dx.doi.org/10.5422/fordham/9780823298112.003.0010.

Full text
Abstract:
Lisa Gasson-Gardner argues that we need religion and political reflection, including the resources of political theology. But we also require more affect, and she draws on and employs affect theory, specifically music, to intervene into the discourses of political theology to recover a kind of truth that resists racial, political, and anti-environmental authoritarianism and extremism. In chapter 9, Gasson-Gardner argues that we need to critique and repudiate the concept of sovereignty, but still retain the idea of an exception, including the exceptional power of the people to fashion their tru
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gassing power"

1

Fivaz, Jean, and Johan Rens. "The Impact of Wind Farm Flicker on Transformer Gassing." In 2024 IEEE 14th International Workshop on Applied Measurements for Power Systems (AMPS). IEEE, 2024. http://dx.doi.org/10.1109/amps62611.2024.10706673.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fofana, Issouf. "The Gassing of Insulating Fluids." In 2021 International Conference on Electrical Materials and Power Equipment (ICEMPE). IEEE, 2021. http://dx.doi.org/10.1109/icempe51623.2021.9509205.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fofana, I., J. Sabau, D. Bussieres, and E. B. Robertson. "The mechanism of gassing in power transformers." In 2008 IEEE International Conference on Dielectric Liquids (ICDL 2008). IEEE, 2008. http://dx.doi.org/10.1109/icdl.2008.4622489.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bail, Alain Le, Michel Havet, Maryvonne Pasco, and Jean Marc Chourot. "Application of Freezing Rate Expressions and Gassing Power to Frozen Bread Dough." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0740.

Full text
Abstract:
Abstract A literature review of the freezing point expressions shows the availability of various equations to estimate the freezing rate. The expression of the cooling rate during freezing is used to estimate the freezing rate. Cylinders of bread dough were frozen in a tunnel with three different freezing conditions. Gassing power of the yeasted dough (saccharomyces cerevisiae) after thawing were obtained with regards to the location. A finite difference scheme was used to model freezing of an infinite cylinder of bread dough and to calculate freezing rates. Experimental results pointed out th
APA, Harvard, Vancouver, ISO, and other styles
5

Homeier, Kristin, Mohammad Imani, Moritz Kuhnke, Tobias Kinkeldey, and Peter Werl. "Investigation on Gassing Behavior of Various Insulation Liquids in Power Transformers." In 2019 IEEE 20th International Conference on Dielectric Liquids (ICDL). IEEE, 2019. http://dx.doi.org/10.1109/icdl.2019.8796796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rumpelt, Patrick, Ronny Fritsche, Beriz Bakija, and Frank Jenau. "Long-term study of partial discharge and gassing behavior of alternative insulating oils for oil gaps." In 2015 50th International Universities Power Engineering Conference (UPEC). IEEE, 2015. http://dx.doi.org/10.1109/upec.2015.7339915.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rumpelt, Patrick, Ronny Fritsche, Beriz Bakija, and Frank Jenau. "Long-term investigations of partial discharge and gassing behavior of ester-based insulating oils for a heated oil gap." In 2017 52nd International Universities Power Engineering Conference (UPEC). IEEE, 2017. http://dx.doi.org/10.1109/upec.2017.8231884.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Huijuan, Shujie Ma, Huimin Yu, Qi Zhang, and Peng Wang. "Study on stray gassing of transformer oil with metal deactivator under condition of coincident electric field and temperature." In 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2017. http://dx.doi.org/10.1109/icepe-st.2017.8189000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Deguchi, Yasushi, Sumio Matsuda, Jiro Aoki, Takashi Tamura, Yasunobu Iwai, and Shigeki Kikui. "Failure Analysis of a Transistor Lead." In ISTFA 2000. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.istfa2000p0443.

Full text
Abstract:
Abstract We investigated the cause of the whisker/discoloration which were found in the transistor lead of stocks (package type TO-18, low power use). In process of the investigation, we estimate two corrosion models that the first model is the remnant of sulfuric acid in cracks of the nickel-phosphorus plating layer in the transistor lead, the second model is the out-gassing or the dissolved ions from the stock container and conductive mat. As the results of the investigation which includes analyses of the whisker/discoloration cross section made by FIB (Focused Ion Beam), a reproductive expe
APA, Harvard, Vancouver, ISO, and other styles
10

Collins, L. E., K. Dunnett, T. Hylton, and A. Ray. "Development of Heavy Gauge X70 Helical Line Pipe." In 2018 12th International Pipeline Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/ipc2018-78763.

Full text
Abstract:
A decade ago, the pipeline industry was actively exploring the use of high strength steels (X80 and greater) for long distance, large diameter pipelines operating at high pressures. However in recent years the industry has adopted a more conservative approach preferring to utilize well established X70 grade pipe in heavier wall thicknesses to accommodate the demand for increased operating pressures. In order to meet this demand, EVRAZ has undertaken a substantial upgrade of both its steelmaking and helical pipemaking facilities. The EVRAZ process is relatively unique employing electric arc fur
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!