Relevant bibliographies by topics / Gear Housing

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Gear Housing'

Author: Grafiati
Published: 4 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gear Housing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gear Housing"

1

Shashank, Pandey*1 Nikhilesh N. Singh2 &. Dr. Prabhat Kumar Sinha3. "MODELING, DESIGN & ANALYSIS OF DIFFERENTIAL GEAR BOX AND ITS HOUSING THROUGH FEM, SOLIDWORK & ANSYS BENCHWORK 14.0." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 9 (2017): 127–39. https://doi.org/10.5281/zenodo.886748.

Full text
Abstract:
In this paper the differential gears assembly and its housing are analyzed for the vibrational effect on a system in which the life of the gears is detrmined within different frequency range in the platform of Ansys-14.0 with use of solidworks modeling . In this type of analysis the gear housing is also effected by vibration in casing that surrounds the gear box. The main objective of gear is to protect and to provide a safe platform to get good gear transmission. It is also gives a supports for moving parts and protected it from outside condition. The differential couples and the propeller sh
APA, Harvard, Vancouver, ISO, and other styles
2

Shashank, Pandey*1 Nikhilesh N. Singh2 &. Dr. Prabhat Kumar Sinha3. "MODELING, DESIGN & ANALYSIS OF DIFFERENTIAL GEAR BOX THROUGH FEM, SOLIDWORK & ANSYS BENCHWORK 14.0." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 887–94. https://doi.org/10.5281/zenodo.834600.

Full text
Abstract:
In this research the differential gears analyzed for vibration effect on whole system to optimize the life of the gears under different frequency in the platform of Ansys-14.0 with help of solid work modelling. In this analysis the gear housing also affected by vibration in casing that surrounds the gear box. The function of gear is to protect and provide a platform for gear transmission. It also provides supports for moving parts and protection from outside environmental condition. The differential couples, the propeller shaft to the pinion, which in turn runs on the ring gear of the differen
APA, Harvard, Vancouver, ISO, and other styles
3

Ren, Yafeng, Xiaohui Sun, Yusheng Luo, Wenwen Lu, and Haiwei Wang. "Layering Vibration Transfer Path Analysis of a Flexible Supported Gear System Based on the Vibration Power Flow Theory." Processes 11, no. 4 (2023): 1233. http://dx.doi.org/10.3390/pr11041233.

Full text
Abstract:
In the marine gear system, the vibration of gears is transmitted to the ship foundation through shafts, bearings, housing, and isolators, and then the underwater noise is generated. Analyzing the vibration transfer properties and identifying the critical path can provide guidance to the low-noise design of the gear system. In this paper, a coupled gear-housing-foundation dynamic model is proposed for a flexible supported gear system, in which the flexibility of each subsystem and the coupling relationship between them are taken into account. The transferring process of gear vibration is divide
APA, Harvard, Vancouver, ISO, and other styles
4

Figlus, Kozioł, and Kuczyński. "The Effect of Selected Operational Factors on the Vibroactivity of Upper Gearbox Housings Made of Composite Materials." Sensors 19, no. 19 (2019): 4240. http://dx.doi.org/10.3390/s19194240.

Full text
Abstract:
This paper presents the results of laboratory tests in which evaluation was performed regarding the effect of selected operating factors on the vibroactivity of upper gearbox housings made of three different fiber reinforced polymer composite materials with diverse layouts (cross and random) and types of reinforcing fibers: glass fiber and carbon fiber. The results of tests for composite housings were compared with those for a steel housing. The tests showed that composite housings had a weight lower by more than 60% compared to the steel housing. A multisensor measuring system consisting of v
APA, Harvard, Vancouver, ISO, and other styles
5

Radzevich, Stephen P. "About Hob Idle Distance in Gear Hobbing Operation." Journal of Mechanical Design 124, no. 4 (2002): 772–86. http://dx.doi.org/10.1115/1.1517561.

Full text
Abstract:
This study is focused on some features of geometry and kinematics of gear hobbing operation. The principal goal is to determine minimal hob idle distance required for complete generation of the gear teeth. This task is of importance in two aspects: to cut hobbing time and to reduce axial size of a hobbed cluster gear, gear with shoulder etc. The necessity of cutting hobbing time is evident. Reduction of axial size of a hobbed gear cluster leads to reduction of size and weight of the gear cluster itself and of the gear train housing, and therefore its necessity is also evident. Methods of analy
APA, Harvard, Vancouver, ISO, and other styles
6

Cojocaru, Vasile, Zoltan Iosif Korka, and Calin Octavian Miclosina. "Stress Analysis and Optimal Design of the Housing of a Two-Stage Gear Reducer." Applied Mechanics and Materials 658 (October 2014): 183–88. http://dx.doi.org/10.4028/www.scientific.net/amm.658.183.

Full text
Abstract:
The design of the housings of the gear reducers is made, usually, using empirical equations based on the center distance (the distance between shafts). These equations can lead to inappropriate stresses distribution and inadequate material consumption at the final product. In the manufacturing of large series and in the manufacturing of the gear reducers/ gearboxes with large dimensions it is necessary an optimization of the housing dimensions. The use of the finite element analysis in this process, combined with experimental researches, can generate significant improvements. The paper is focu
APA, Harvard, Vancouver, ISO, and other styles
7

Andrievskiy, Anatoliy, Elena Chaban, and Vladimir Moskvichev. "Durability assessment and rational fastening to Traction Engine of gear housing of an electric locomotive." Proceedings of Petersburg Transport University 19, no. 2 (2022): 182–92. http://dx.doi.org/10.20295/1815-588x-2022-19-2-182-192.

Full text
Abstract:
Purpose: To investigate the dependence of workload of an electric locomotive gear housing on the parameters of its attachment to a traction motor. To determine own oscillation frequencies under various conditions of its attachment to a traction motor. To propose technical solution allowing to reduce the workload of gear housing in the case of abnormal operation of its attachment to a traction motor. To propose an algorithm for housing lifetime calculation taking into account its fastening parameters. Methods: The values of gear housing own frequencies are obtained by solving the system of Lagr
APA, Harvard, Vancouver, ISO, and other styles
8

Vasylchenko, Yana, and Oleh Myronenko. "ENHANCING THE STRENGTH OF DRIVE GEARS IN UNMANNED AERIAL VEHICLES." Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry, no. 1(11) (July 8, 2025): 47–52. https://doi.org/10.20998/2079-004x.2025.1(11).05.

Full text
Abstract:
The use of asymmetric gear wheels has been proposed to ensure reliable rotation of propellers in unmanned aerial vehicles (UAVs). This requires maintaining the kinematic accuracy of drive gears, compliance with smoothness standards, and proper backlash tolerances, with one of the primary requirements being the strength of the gear teeth. The developed asymmetric gear transmissions for UAV modernization make it possible to increase payload capacity and integrate more powerful engines. Improved tooth strength in the drive gears enables the use of polyamide materials for their manufacture. Replac
APA, Harvard, Vancouver, ISO, and other styles
9

Hua, Xia, and Zaigang Chen. "Effect of roller bearing elasticity on spiral bevel gear dynamics." Advances in Mechanical Engineering 12, no. 7 (2020): 168781402093889. http://dx.doi.org/10.1177/1687814020938895.

Full text
Abstract:
The dynamics of spiral bevel gears have gained increasing importance due to concerns relating to noise and durability. This is because the mesh force acting on the gear teeth is amplified under dynamic conditions, potentially reducing the fatigue life of the gears. Furthermore, a sizable dynamic force can be transmitted to the housing, inducing structure-born gear whine. The elasticity of the bearings can influence the dynamics of spiral bevel gears. In this article, the finite element formulation of a spiral bevel geared rotor dynamic system is applied to investigate the influence of bearing
APA, Harvard, Vancouver, ISO, and other styles
10

Koch, Yanik, Florian Michael Becker-Dombrowsky, and Eckhard Kirchner. "Classification of Artificial Gear Damage by Angle Measurement Utilizing the Gear Wheel as a Material Measure." Applied Sciences 15, no. 12 (2025): 6446. https://doi.org/10.3390/app15126446.

Full text
Abstract:
Gear condition monitoring is predominantly executed through the utilization of acceleration sensors positioned on the housing. However, recent advancements have identified measuring the instantaneous angular speed as a compelling alternative as it shortens the transmission path and therefore provides high-quality rotational angle information that can be used to increase damage prediction accuracy, particularly under transient operating conditions. Additionally, there are a variety of methodologies for integrating sensors into gears, which underscores the necessity for high-quality condition da
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Gear Housing"

1

Kalidindi, Naresh, and Mohamad Fardmoshiri. "Topology Optimization of Gear shifter Housing and Contact Benchmarks." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Maskinteknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-13398.

Full text
Abstract:
In automotive component design criteria such as weight, strength, stiffness, manufacturing cost are sensitive issues for boosting its performance which in turn has direct impact on fuel economy and cost.   This thesis deals with the design of gear shifter housing for Volkswagen car by using modern topology optimization techniques to the existing design. gear shifter housing holds the shifting mechanism and guides the lever to select the respective gear for different speed. Optimizing the design in terms of topology, material and structural is very important in arriving at practical solution.  
APA, Harvard, Vancouver, ISO, and other styles
2

Zhuang, Shengnan. "Gearbox housing topology optimization with respect to gear misalignment." Thesis, Linköpings universitet, Mekanik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-87263.

Full text
Abstract:
Structural topology optimization methods have existing and been improving theoretically since 1980s; however, in industry, with respect to the certain conditions, proper modification is always desired. This study develops a specific method to utilize topology optimization for gearbox housing design. Gearbox housing maintains the position of the shafts to ensure the precision of gear engagement in all operational states (Naunheimer, et al., 2010). The current housing design processing used in Vicura AB, a Swedish powertrain company, is able to achieve stiff optimal housing material distribution
APA, Harvard, Vancouver, ISO, and other styles
3

Polly, Joseph H. "An Experimental Investigation of Churning Power Losses of a Gearbox." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1362745236.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Král, Jiří. "Výpočtové modelování vibrací převodovky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231298.

Full text
Abstract:
This diploma thesis deals with the model design for gearbox. The work is focused to its basic creation and optimization in programs of MBS ADAMS and ANSYS. It includes also short summary of contemporary solutions, which are used, and basic characterization of acoustic quantities.
APA, Harvard, Vancouver, ISO, and other styles
5

Kosaraju, Nikhil Maharshi. "Dynamic Analysis of an Automotive Power Transfer unit : Towards prediction of TE and housing vibrations." Thesis, KTH, Maskinkonstruktion (Avd.), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-259683.

Full text
Abstract:
This work describes the use of Multi-Body Simulation (MBS) to create a virtual prototype of a geared drive called Power transfer unit (PTU). PTU is a subsystem of the all-wheel drive driveline responsible for transfer of power between front and rear axles in an Automobile. The objective of the developing the prototype is to simulate the dynamic behavior of the PTU. Focus is on predicting the gear transmission error(TE) and gearbox housing vibration level. A Hypoid gear set, bearings, tubular shaft and housing are the major components in the PTU. This work is carried out at GKN Automotive which
APA, Harvard, Vancouver, ISO, and other styles
6

Kuhejda, Lubomír. "Posouzení tělesa převodovky a rámu pohonu kolesa kombinovaného skládkového stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231208.

Full text
Abstract:
This master’s thesis deals with the structural analysis of the gearbox housing and drive frame of bucket-wheel stacker/reclaimer. Theme is designed by Vítkovice Gearworks a.s. Objective of the work is to determine the size of the forces in the gears, bearings and perform strain stress analysis. The main part of the work is focused on creating finite element model in software NX I-Deas. The solution and evaluation is performed in software MSC Marc.
APA, Harvard, Vancouver, ISO, and other styles
7

Rosén, Simon, and Markus Eriksson. "Naked Flat : Ett bostadskoncept som ger kunden möjlighet att färdigställa delar av en nyproducerad bostadsrätt." Thesis, Uppsala universitet, Byggteknik och byggd miljö, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-447775.

Full text
Abstract:
The regulations that form the basis of the construction sector not only hamper productivity, but also quality, innovation and customer focus. They counteract change by being too regulated and the result is similar in that everyone must relate to the same industry standard and the same framework in the form of rules.  Apartments have had a steady rise in prices over recent decades, statistics suggest that the price of apartments in recent years was higher than ever before. The majority of Sweden's residents living in apartment buildings today live in rental apartments, which is because of the s
APA, Harvard, Vancouver, ISO, and other styles
8

Andreoli, Ana Claudia [UNESP]. "Eficiência do Programa Minha Casa Minha Vida em gerar benefícios sociais: uma análise envoltória de dados das unidades federativas brasileiras no período de 2009 a 2012." Universidade Estadual Paulista (UNESP), 2016. http://hdl.handle.net/11449/141458.

Full text
Abstract:
Submitted by ANA CLÁUDIA ANDREOLI null (ana.andreoli@terra.com.br) on 2016-07-06T12:45:57Z No. of bitstreams: 1 Dissertação_Ana_Andreoli_RA_173407.pdf: 1290722 bytes, checksum: 9daa168c7b37d86f4c7d87338f9c48d6 (MD5)<br>Approved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-07-08T12:51:04Z (GMT) No. of bitstreams: 1 andreoli_ac_me_bauru.pdf: 1290722 bytes, checksum: 9daa168c7b37d86f4c7d87338f9c48d6 (MD5)<br>Made available in DSpace on 2016-07-08T12:51:04Z (GMT). No. of bitstreams: 1 andreoli_ac_me_bauru.pdf: 1290722 bytes, checksum: 9daa168c7b37d86f4c7d
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Gear Housing"

1

United States. Army Aviation Research and Technology Activity. and United States. National Aeronautics and Space Administration., eds. Acoustical analysis of gear housing vibration. National Aeronautics and Space Administration, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Raj, Singh, Zakrajsek James J, United States. Army Aviation Research and Technology Activity., and United States. National Aeronautics and Space Administration., eds. Modal analysis of gear housing and mounts. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Abernathy, Brendan. New owner-occupied housing in the inner city: The case of GEAR. Birmingham Polytechnic, Built Environment Development Centre, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liepach, Christoph. Stadtbilderklärer Gera-Lusan. Mitteldeutscher Verlag GmbH, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dept, San Francisco (Calif ). Planning. Initial study: 2003.0273E :46 Geary Street. Planning Dept., 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

San Francisco (Calif.). Planning Dept., Institute on Aging (San Francisco, Calif.), BRIDGE Housing Corporation, et al., eds. 3575 Geary Boulevard senior health services facility & senior housing project: Draft environmental impact report. San Francisco Planning Department, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

A review of gear housing dynamics and acoustics literature. National Aeronautics and Space Administration, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

National Aeronautics and Space Administration (NASA) Staff. Modal Analysis of Gear Housing and Mounts. Independently Published, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

National Aeronautics and Space Administration (NASA) Staff. Review of Gear Housing Dynamics and Acoustics Literature. Independently Published, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

A review of gear housing dynamics and acoustics literature. Ohio State University Research Foundation, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Gear Housing"

1

Franco, Rosendo, Michael A. Blas, Luis H. Inafuku, et al. "Computational Tool for the Intelligent Design of Gearboxes of Cylindrical Gears and Welded Housing." In Interdisciplinary Applications of Kinematics. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16423-2_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Petrakova, E., and V. Sumatokhin. "Development of Algorithm for Creating Parametric 3D Models, Controlled by Mathcad Calculations, to Study Parameters of Enclosed Gears Housing." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22041-9_51.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bloch, Heinz P. "Gear and General Bearing Housing Protection." In Petrochemical Machinery Insights. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-809272-9.00014-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Gears and Vibrations in a Gearbox." In Gearbox Vibrations: Analysis and Reduction. ASM International, 2024. http://dx.doi.org/10.31399/asm.tb.gvar.t59360001.

Full text
Abstract:
Abstract In the case of gearboxes, vibration is the primary mode of failure even at the mid-range of operating speeds. Avoiding such failures requires an understanding of gearbox design, vibration theory, and material properties. This chapter details sources and types of gearbox vibrations; characteristics of gearbox vibrations; fundamentals of periodic vibrations; and vibration theory. It provides housing design for single-stage offset parallel gearboxes, high-speed gearboxes, and epicyclic gearboxes. The chapter then provides an analysis and selection of design factors for vibration reductio
APA, Harvard, Vancouver, ISO, and other styles
5

"Housings." In Gear Motor Handbook. Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/978-3-642-79589-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Glinsky, Albert. "Socket to Me, Baby!" In Switched On. Oxford University PressNew York, 2022. http://dx.doi.org/10.1093/oso/9780197642078.003.0015.

Full text
Abstract:
Abstract Chapter 15 highlights the first use of the Moog live. In 1969, New York’s Museum of Modern Art invited Bob to present a groundbreaking concert in its Sculpture Garden: synthesizers alone carrying an entire concert. The Trumansburg crew designed preset boxes (dubbed 1CAs) to help the performers, who included John McLaughlin and Hank Jones, navigate sound changes more quickly. The Garden had only one electrical outlet and the concert ended abruptly when someone stood on the socket housing, disconnecting all the gear. The Moog continued its ascent. It was called, “the biggest thing since
APA, Harvard, Vancouver, ISO, and other styles
7

Barreiro, P., S. Pfrimmer, G. Armutcu, and J. Hermes. "Quality improvement of an aluminum gearbox housing by implementing additive manufacturing." In International Conference on Gears 2022. VDI Verlag, 2022. http://dx.doi.org/10.51202/9783181023891-1429.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Iroh, Jude O. "Poly(butylene terephthalate)." In Polymer Data Handbook. Oxford University PressNew York, NY, 2009. http://dx.doi.org/10.1093/oso/9780195181012.003.0075.

Full text
Abstract:
Abstract Major Applications Molding plastic, molecular component of polyether ester thermoplastic block copolymer elastomer, fiber and plastic forming, used in tooth and paint brush and in bristles and filler fabrics. Properties of Special Interest Mostly synthesized as flexible semi-crystalline thermoplastic, PBT has outstanding resilience and toughness. High toughness and resilience is due to improved chain flexibility derived from the four methylene units. Used in thermoplastic matrix composites for gears, machine parts, small pump housings, and insulators.
APA, Harvard, Vancouver, ISO, and other styles
9

Viers, Brent D. "Nylon 6,6." In Polymer Data Handbook. Oxford University PressNew York, NY, 2009. http://dx.doi.org/10.1093/oso/9780195181012.003.0043.

Full text
Abstract:
Abstract Major Applications Gear teeth, pinions, ball bearing cages, switch parts, spools, electro-insulating parts; semifinished products, pipes, profiles; machine parts, parts subject to wear such as friction bearings, roller bearing cages, engine parts, water pump impellers, and also parts of door locks; fan and blower wheels, parts of housings, fuel filters, clips, chain tension rails; sliding bearings for swivel chairs and folding tables, sliding feet and fittings, connecting parts in furniture making; patio and party furniture. Properties of Special Interest High mechanical strength, gre
APA, Harvard, Vancouver, ISO, and other styles
10

Barreiro, P., J. Hoffmeister, J. Hermes, and A. Bronner. "New improvement opportunities through applying topology optimization combined with 3D printing to the construction of gearbox housings." In International Conference on Gears 2019. VDI Verlag, 2019. http://dx.doi.org/10.51202/9783181023556-1823.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gear Housing"

1

McIntyre, Sean, Qingtao Yu, Robert Kunz, Liming Chang, and Robert Bill. "A Computational System Model for Gearbox Loss-of-Lubrication." In Vertical Flight Society 70th Annual Forum & Technology Display. The Vertical Flight Society, 2014. http://dx.doi.org/10.4050/f-0070-2014-9628.

Full text
Abstract:
A multi-physics, multi-scale numerical simulation technique is presented for modeling gearboxes operating under loss-of-lubrication conditions. Accordingly, the tool includes components for contact mechanics, tribology associated with EHL through boundary lubrication regimes, CFD modeling of the gearbox flow, conduction within the gears, housing and other gearbox components, and free convection to the external environment. These component physics models are coupled in a fashion that accommodates their disparate space and time-scales. This paper describes each sub-model in detail, and the space
APA, Harvard, Vancouver, ISO, and other styles
2

McIntyre, Sean, and Robert Kunz. "Advances and Applications in Comprehensive Gearbox Aero-Thermodynamics and Tribology Simulation." In Vertical Flight Society 73rd Annual Forum & Technology Display. The Vertical Flight Society, 2017. http://dx.doi.org/10.4050/f-0073-2017-12225.

Full text
Abstract:
The current status of an ongoing effort to develop a comprehensive gearbox aero-thermodynamics and tribology simulation tool, named PSULOL, applicable to both well-lubricated and loss-of-lubrication operation is presented. PSULOL employs a multi-scale approach, wherein various physical effects including: meshing tribology, convection heat transfer within the system and to the environment, high-frequency thermodynamic effects induced by the gear meshing frequency, and the long-time response of the overall gearbox temperature to a net imbalance of heat generation and transfer to the environment
APA, Harvard, Vancouver, ISO, and other styles
3

Matsiuk, Iryna, Olexandr Tverdokhlib, Denys Dovhal, and Bohdan Tsymbal. "Ways to Reduce the Mass of Body Parts of Closed Gears." In International Scientific Applied Conference "Problems of Emergency Situations". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-iji7s0.

Full text
Abstract:
The paper presents the results of work on changing the mass of closed gears by the example of a single-stage cylindrical gearbox. Two variants of the solution for the problem are considered. In the first variant, it is proposed to reduce the thickness of the walls of unloaded areas to the constructive minimum. The other solution involves the replacement of the unloaded areas of the gearbox housing with non-metallic inserts. To produce the inserts, ZELLAMID plastic is recommended. Both variants are based on the method of topological optimization of housing parts. The Fusion 360 software product
APA, Harvard, Vancouver, ISO, and other styles
4

Park, Chan Il. "Analytical Investigation of Radiated Noise for a Shaft-Bearing-Plate System Due to the Excitation of Helical Gears." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35585.

Full text
Abstract:
Helical gears excite their housing system through forces and moments of bearings and then radiate noise. If noise is to be reduced, the contribution of noise to the gear housing due to the force and the moment must be determined. This work analytically investigated the radiated noise of a helical gear-housing system due to the excitation of helical gears. The helical gear-housing system consisted of gears, shafts, bearings, housings, and accessories. The gears were modeled as a 12-degree of freedom mass-spring-damper system; the shaft was modeled as a rod, a beam, and a torsional shaft so that
APA, Harvard, Vancouver, ISO, and other styles
5

Hambric, Stephen A., Micah R. Shepherd, and Robert L. Campbell. "Effects of Gears, Bearings, and Housings on Gearbox Transmission Shafting Resonances." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38980.

Full text
Abstract:
Gear noise, comprised of tones centered around gear meshing frequencies, is transmitted through driveshafts, bearings, and transmission housings. Gear noise transmission is amplified, sometimes strongly, by modes of vibration of the shafting. The shafts of the input and output gears vibrate like beams at low to mid frequencies. The resonance frequencies and vibration patterns of these beam-like modes depend strongly on the shaft boundary conditions, which in turn depend on the impedances of the bearings, and of the transmission housing. In this paper, we present simulated and measured modes of
APA, Harvard, Vancouver, ISO, and other styles
6

Pawar, Ajinkya, Andrea Vacca, and Manuel Rigosi. "Prediction of Housing Wear-in in External Gear Machines Considering Deformation Effects." In ASME/BATH 2023 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/fpmc2023-111670.

Full text
Abstract:
Abstract Initial housing wear-in is a key process to ensure high overall efficiency in most of the high-pressure (up to 300 bar) external gear pumps and motors. The internal housing profile that results from the penetration of the gears during the initial wear-in directly affects the volumetric efficiency of the pump or motor in operation. Therefore, an accurate prediction of such wear and its related effects is an essential aspect for a simulation tool for external gear machines. However, current state-of-the-art tools either neglect this aspect or make heavy simplifications. This paper prese
APA, Harvard, Vancouver, ISO, and other styles
7

Gmirya, Yuriy, Peter Palcic, Dave Binney, Wei Hu, and Erin Carter. "Full Scale Gear Tooth Bending Fatigue Tests Obtained Early in the Development of a Rotorcraft Transmission." In Vertical Flight Society 79th Annual Forum & Technology Display. The Vertical Flight Society, 2023. http://dx.doi.org/10.4050/f-0079-2023-18150.

Full text
Abstract:
A new gear testing method is introduced to reduce development cost and time. It allows component-level testing of individual gear meshes and new gear designs. Instrumented gear sets are tested at full load while the rest of gearbox components are still being built. Since the fatigue strength of the gears is determined earlier in the development cycle, design deficiencies are identified and understood earlier. In this new method, an individual gear mesh installed in a stiff facility housing is used to mimic the contact pattern and bending stress demonstrated by the same mesh in an actual aircra
APA, Harvard, Vancouver, ISO, and other styles
8

Kolivand, Mohsen, Abdolhamid Hannaneh, Nasser Soltani, and Zabihhollah Kargar Shoroki. "Retaining Hypoid Gear Performance Characteristics With Differential Housing and Shafts Deflections." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13216.

Full text
Abstract:
Hypoid gears are widely used in rear drive and 4WD vehicle axles. Investigation of their sensitivity to misalignments is one of the most important aspects of their design and optimization procedures. Because of unavoidable mounting deflections under working load, the values for mounting distances and angle deviate from the designed (desired) values (due to elastic deformation of differential housing and gear shafts). As a result the performance characteristics will be changed. This study provides a calculation procedure to design "optimized vehicle differential housing side elastic coefficient
APA, Harvard, Vancouver, ISO, and other styles
9

Cooley, Christopher G., and Adrian A. Hood. "Analysis of the Housing Vibration of a Rotorcraft Planetary Gear Using a Finite Element/Contact Mechanics Model." In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-67984.

Full text
Abstract:
This study investigates the planetary gear housing vibration for rotorcraft systems with equally spaced and diametrically opposed planets using a finite element/contact mechanics model. This approach permits accurate housing deflection calculations at each time instant that result from the changing contact conditions on all gear teeth and elastic deformations of each gear. Planetary gears with diametrically opposed planets have larger amplitude vibrations and more frequency content than those with equally spaced planets. Parametric studies show that although the frequency content does not chan
APA, Harvard, Vancouver, ISO, and other styles
10

Moshammer, Thomas, Franz Mayr, Karl Kargl, and Claudia Honeger. "Simulation of Oil Flow in Gear Box Housing." In SAE 2006 World Congress & Exhibition. SAE International, 2006. http://dx.doi.org/10.4271/2006-01-1574.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Gear Housing"

1

Franzese, Oscar, Mary Beth Lascurain, and Gary J. Capps. Federal Emergency Management Agency Mobile Housing Unit Running Gear Testing: Final Report. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1560433.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Gear Housing' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography