Log in

Relevant bibliographies by topics / Gebr. De Coene (Firm)

Contents

Journal articles
Books
Conference papers

Academic literature on the topic 'Gebr. De Coene (Firm)'

Author: Grafiati

Published: 27 July 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gebr. De Coene (Firm).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gebr. De Coene (Firm)"

1

Huang, Geng, and Huan Liu. "Thermal Elastohydrodynamic Lubrication Analysis for Rolling Cone Enveloping End Face Worm Drive." Journal of Physics: Conference Series 2459, no. 1 (2023): 012105. http://dx.doi.org/10.1088/1742-6596/2459/1/012105.

Full text

Abstract:

Abstract To explore the thermal elastohydrodynamic lubrication performance of rolling cone enveloping end face worm drive, the mathematical model of thermal elastohydrodynamic lubrication is established based on the meshing theory of rolling cone enveloping end face worm drive and elastohydrodynamic lubrication theory. With the help of the numerical analysis software MATLAB, the thermal elastohydrodynamic lubrication performance under smooth conditions is selectively analyzed by the multigrid method. Besides, the effects of throat coefficient, cone apex radius and half cone angle of the rollin

APA, Harvard, Vancouver, ISO, and other styles

2

Zhang, Qing Gong, Hua Li, and Jin Yao. "Modeling and Kinematics Simulation of HT-CVT Based on Virtual Prototype Technology." Applied Mechanics and Materials 44-47 (December 2010): 884–88. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.884.

Full text

Abstract:

The three-dimensional model of a Half Toroidal Continuously Variable Transmission (HT-CVT) was established by CAXA solid design. The kinematics simulation of the HT-CVT was realized by replacing the traction drive of elasto-hydrodynamic lubrication (EHL) oil film with the contact constraint joints in ADAMS. The angular velocity curves of the power rollers and the output cone disk on the HT-CVT were obtained. Simulation results demonstrate the fluctuation of the angular velocities on the two power rollers and the output cone disk compares well with the conclusion derived from the actual gear ra

APA, Harvard, Vancouver, ISO, and other styles

3

Ma, D. K., and S. L. Yang. "Kinematics of the Cone Bit." Society of Petroleum Engineers Journal 25, no. 03 (1985): 321–29. http://dx.doi.org/10.2118/10563-pa.

Full text

Abstract:

Abstract The bits' and bit cones' angular velocities are variable with time. All published papers on cone bit kinematics, however, are based on the supposition that the motions of cones are uniform. This supposition, therefore, has been the main obstacle to determining the objective law of the working cone bit. The apparatus, methods, and tests results for measuring the bit and cone instantaneous angular velocities are described. A new theoretical analysis of cone bit motion is proposed and some interesting new conclusions are obtained that will help designers and users of cone bits. Introduct

APA, Harvard, Vancouver, ISO, and other styles

4

Barra, Giuseppina, Liberata Guadagno, Luigi Vertuccio, et al. "Different Methods of Dispersing Carbon Nanotubes in Epoxy Resin and Initial Evaluation of the Obtained Nanocomposite as a Matrix of Carbon Fiber Reinforced Laminate in Terms of Vibroacoustic Performance and Flammability." Materials 12, no. 18 (2019): 2998. http://dx.doi.org/10.3390/ma12182998.

Full text

Abstract:

Different industrial mixing methods and some of their combinations ((1) ultrasound; (2) mechanical stirring; (3) by roller machine; (4) by gears machine; and (5) ultrasound radiation + high stirring) were investigated for incorporating multi-walled carbon nanotubes (MWCNT) into a resin based on an aeronautical epoxy precursor cured with diaminodiphenylsulfone (DDS). The effect of different parameters, ultrasound intensity, number of cycles, type of blade, and gear speed on the nanofiller dispersion were analyzed. The inclusion of the nanofiller in the resin causes a drastic increase in the vis

APA, Harvard, Vancouver, ISO, and other styles

5

Floré, Fredie. "Wood Firm De Coene and the Modern Office." Architectural Theory Review, August 11, 2021, 1–18. http://dx.doi.org/10.1080/13264826.2021.1957961.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kekana, Lucas M., Joseph KO Asante, and Bonex Mwakikunga. "The effect of repeated washings on thermal protective performances of one most used structural firefighting turnout gear in the Gauteng Province in South Africa." Journal of Fire Sciences, May 1, 2024. http://dx.doi.org/10.1177/07349041241249635.

Full text

Abstract:

Fire performance measurements of one of the most used firefighting protective ensembles (also called turnout gears), in terms of thermal and smoke hazards, were determined with the cone calorimeter, that of thermal stability were determined with thermogravimetric analyzer, the physical inspection (physical degradation) of the surface done with the scanning electron microscopy, and energy dispersive spectroscopy measurements determined the elemental compositions of the detergent used in washing and the residual elements in the turnout gears. The cone calorimeter results indicated that the value

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Gebr. De Coene (Firm)"

1

Mil, De Kooning, ed. De Coene op Expo 58: 28 projecten. Ghent University Architectural and Engineering Press, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

van, Scherpenzeel A. Joshua, ed. Koninklijk goedgekeurd: Horrix en Mutters, twee Haagse meubelfabrikanten. Waanders, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Doesburg, Cor L. Orgels bij de omroep in Nederland: Historie van orgels bij de omroepen in Nederland in orgelhistorisch perspectief, over besluitvorming bij de aanschaf, over het gebruik van orgelmuziek in de uitzendingen, over organisten en orgelbouwers. Strengholt, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Die Anderen Nurnberger: Technisches Spielzeug aus der "guten alten Zeit". Hobby Haas, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Die Orgeln im St. Petri Dom zu Bremen. Pape Verlag, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gebr. De Coene (Firm)"

1

Turner, A., H. P. Morvan, and K. Simmons. "Two Phase CFD Modelling of a Spiral Bevel Gear Using Particle Injections and a Wall Film Model." In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-94735.

Full text

Abstract:

The capability to model an aeroengine internal gearbox in its entirety using CFD is currently hampered by the complexity of the two-phase, highly rotating system and the computational resource required. The University of Nottingham’s Technology Centre in Gas Turbine Transmission Systems has developed a representation of a shrouded gear based around a cone geometry with momentum sources driving the flow that works well for single phase flow. The next phase of the study is to investigate the capability and limitations of this momentum source model for two phase flow and a significant step toward

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!