Academic literature on the topic 'Geometric Mean Productivity (GMP)'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Geometric Mean Productivity (GMP).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Geometric Mean Productivity (GMP)"

1

Abdi, Nishtman, Reza Darvishzadeh, and Hatami Maleki. "Effective selection criteria for screening drought tolerant recombinant inbred lines of sunflower." Genetika 45, no. 1 (2013): 153–66. http://dx.doi.org/10.2298/gensr1301153a.

Full text
Abstract:
In this study, seventy two sunflower recombinant inbred lines were tested for their yielding ability under both water-stressed and well-watered states. The inbred lines were evaluated in a rectangular 8?9 lattice design with two replications in both well-watered and water-stressed conditions, separately. Eight drought tolerance indices including stability tolerance index (STI), mean productivity (MP), geometric mean productivity (GMP), harmonic mean (HM), stress susceptibility index (SSI), tolerance index (TOL), yield index (YI) and yield stability index (YSI) were calculated based on grain yi
APA, Harvard, Vancouver, ISO, and other styles
2

Frih, Benalia, Abdelmalek Oulmi, and Ali Guendouz. "Study of Drought Tolerance of Some Durum Wheat (Triticum durum Desf.) Genotypes Growing under Semi-arid Conditions in Algeria." International Journal of Bio-resource and Stress Management 12, no. 2 (2021): 137–41. http://dx.doi.org/10.23910/1.2021.2171a.

Full text
Abstract:
The aim of this study was to test the behavior of 5 genotypes cultivated in normal and irrigated conditions with regard to drought stress. We used seven indices of tolerance and resistance to drought stress. Analyze of variance showed that the geometric mean productivity, mean productivity, stress tolerance index, yield stability index, stress sensitivity tolerance and tolerance intensity were effective in judging tolerance to water stress, Boussellem and Oum Rabie was the best at water stress resistance genotypes. Correlation analysis showed that GMP is both an indicator of high performance u
APA, Harvard, Vancouver, ISO, and other styles
3

Rameeh, V. "Nitrogen Deficiency Stress Indices of Seed Yield in Rapeseed (Brassica Napus L.) Genotypes." Cercetari Agronomice in Moldova 48, no. 1 (2015): 89–96. http://dx.doi.org/10.1515/cerce-2015-0020.

Full text
Abstract:
Abstract Most of investigations showed that nitrogen fertilizers gave substantial rapeseed yield increases even in diverse and contradicting conditions but in a few studies were focused on nitrogen deficiency stress effects. Some of important seed yield stress indices based on application and non application of nitrogen (N+ and N0) was studied using six spring rapeseed varieties and their 15 F2 progenies. Significant mean squares of genotypes effects were observed for potential yield (Yp), stress yield (Ys), mean productivity (MP), geometric mean productivity (GMP), tolerance index (TOL), stre
APA, Harvard, Vancouver, ISO, and other styles
4

Arshadi, Aram, Ezzat Karami, Behzad Khateri, and Payam Rezabakhsh. "Drought stress effects on the grain yield among different barley cultivars." Genetika 48, no. 3 (2016): 1087–100. http://dx.doi.org/10.2298/gensr1603087a.

Full text
Abstract:
We examined commercial barley cultivars in two sequential growing season by including irrigation and rainfed conditions under a randomized complete block experimental design. There were positive and significant correlations between the yeild and either of the indices including Mean productivity (MP), Stress Tolerance Index (STI), Geometric Mean Productivity (GMP), Harmonic Mean Productivity (HMP), and Mean Relative Performance (MRP) in both irrigated and drought conditions. The PC1 and PC2 justified 94.86 and 94.44% of total variation in the first year and second year, respectively. According
APA, Harvard, Vancouver, ISO, and other styles
5

Moradi, H., G. A. Akbari, S. Khavari Khorasani, and H. A. Ramshini. "Evaluation of drought tolerance in corn (Zea mays L.) new hybrids with using stress tolerance indices." European Journal of Sustainable Development 1, no. 3 (2012): 543. http://dx.doi.org/10.14207/ejsd.2012.v1n3p543.

Full text
Abstract:
In order to study the effect of drought stress on morphophysiologic characteristics,yield and yield components of 8 new hybrids of corn (Zea maize L.) and KSC704commercial hybrid as control resistant to drought and warm (which were bred andscreened in Khozestan province condition), an experiment was conducted in aRandomized Complete Block Design (RCBD) with three replications underdrought stress and normal irrigation at Khorasan-Razavi Agriculture ResearchCenter, Mashhad, Iran on June 10, 2011. The results of analyze variance showedthat under normal irrigation and drought condition, there was
APA, Harvard, Vancouver, ISO, and other styles
6

Priyanto, Slamet Bambang, Roy Efendi, and Ahmad Muliadi. "Efektifitas penggunaan beberapa indeks toleransi untuk menyeleksi jagung toleran nitrogen rendah." Jurnal Agro 9, no. 2 (2022): 241–51. http://dx.doi.org/10.15575/20291.

Full text
Abstract:
Keakuratan dalam seleksi jagung hibrida toleran N rendah dapat ditingkatkan dengan penggunaan beberapa indeks seleksi secara sekaligus. Penelitian ini bertujuan mengidentifikasi indeks toleransi yang sesuai untuk seleksi jagung hibrida toleran N rendah serta memilih jagung hibrida toleran N rendah. Penelitian dilaksanakan di IP2TP Bajeng Balai Penelitian Tanaman Serealia Kabupaten Gowa bulan April sampai dengan September 2021. Sebanyak 8 hibrida dan 2 varietas pembanding ditanam pada rancangan tersarang tiga ulangan. Genotipe tersarang pada taraf pupuk N. Taraf pupuk N meliputi 100 kg N ha-1 d
APA, Harvard, Vancouver, ISO, and other styles
7

JHA, UDAY CHAND, RINTU JHA, NARENDRA PRATAP SINGH, SANDIP SHIL, and PARESH CHANDRA KOLE. "Heat tolerance indices and their role in selection of heat stress tolerant chickpea (Cicer arietinum) genotypes." Indian Journal of Agricultural Sciences 88, no. 2 (2018): 260–63. http://dx.doi.org/10.56093/ijas.v88i2.79204.

Full text
Abstract:
Given the current scenario of global climate change, high temperature stress is appearing as a major challenge limiting crop productivity including chickpea (Cicer arietinum L.). Evidences of significant yield loss in chickpea due to high temperature stress encountering during reproductive stage has been recorded. Therefore, to sustain chickpea productivity, identification of heat stress (HS) tolerant chickpea via recruiting ‘breeder’s friendly’ selection criteria based on yield traits under field condition is urgently needed. In our current study, we evaluated 78 chickpea genotypes (including
APA, Harvard, Vancouver, ISO, and other styles
8

JOKAR, Fereshteh, Rahmatollah KARIMIZADEH, Asad MASOUMIASL, and Reza AMIRI FAHLIANI. "Canopy Temperature and Chlorophyll Content are Effective Measures of Drought Stress Tolerance in Durum Wheat." Notulae Scientia Biologicae 10, no. 4 (2018): 575–83. http://dx.doi.org/10.15835/nsb10410288.

Full text
Abstract:
Durum wheat (Triticum durum L.) is used for the preparation of multiple food products, including pasta and bread. Its production is restricted due to diverse environmental stresses i.e. drought and heat stress. Here, comparative analysis of durum wheat varieties was done by studying canopy temperature depression (CTD) and chlorophyll content (CHL), yield and yield contributing traits to evaluate their performance under stress and low stress conditions. Twelve durum wheat genotypes were studied under stressful and low-stress conditions in Gachsaran region of Iran. CTD and CHL were measured at t
APA, Harvard, Vancouver, ISO, and other styles
9

Memari, Morteza, Mohammad Reza Dadashi, Fatemeh Sheikh, and Hossein Ajamnoruzi. "Evaluation of Drought Stress Tolerance in Some Faba Bean Genotypes Using Drought Tolerance Indices." Romanian Agricultural Research 39 (2022): 35–43. http://dx.doi.org/10.59665/rar3904.

Full text
Abstract:
To evaluate drought tolerance in faba bean genotypes, 21 genotypes were studied in a randomized complete block design with three replications under normal irrigation and drought stress conditions. The experiment was conducted in 2017-2018 at research station of Gorgan, Iran. Indices such as stress tolerance index (STI), stress susceptibility index (SSI), tolerance (TOL), mean productivity (MP), geometric mean productivity (GMP), yield index (YI) and yield sustainability index (YSI) were calculated for all genotypes according to grain yield in normal irrigation and stress conditions. Based on a
APA, Harvard, Vancouver, ISO, and other styles
10

Attia, Mohamed Abd El-Hammed, Moamen M. Abou El Enin, Ayman M. Abou Tahoun, Fatma I. M. Abdelghany, and Rasha S. El Serafy. "Productivity of some barley cultivars as affected by supplemental irrigation under rainfed conditions." MAY 2022, no. 16(05):2022 (May 1, 2022): 665–75. http://dx.doi.org/10.21475/ajcs.22.16.05.p3647.

Full text
Abstract:
Barley is widely cultivated in the northern coasts of Egypt and in the newly reclaimed lands. The goal of this study was response of some naked barley cultivars with high yield potential using supplemental irrigation under rain-fed conditions at Al-Kasr area, Marsa Matrouh, North-Western Coast of Egypt. The growth, yield, and drought-tolerance indices of Giza 129, Giza 130, and Giza 131, barley cultivars were estimated under rain-fed and supplemental irrigation regimes (SI0: rainfall only; SI1: two supplementally irrigations at tillering and heading stages; SI2: three supplementally irrigation
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Geometric Mean Productivity (GMP)"

1

Xu, Guoliang, and Qin Zhang. "Minimal Mean-Curvature-Variation Surfaces and Their Applications in Surface Modeling." In Geometric Modeling and Processing - GMP 2006. Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11802914_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Nutrients in Salmonid Ecosystems: Sustaining Production and Biodiversity." In Nutrients in Salmonid Ecosystems: Sustaining Production and Biodiversity, edited by Patrick A. Slaney, Bruce R. Ward, and James Craig Wightman. American Fisheries Society, 2003. http://dx.doi.org/10.47886/9781888569445.ch9.

Full text
Abstract:
<em>Abstract.</em>—Oligtrophic streams are ubiquitous throughout coastal British Columbia, and thereby, significant nutrient influx can be provided externally via salmon carcasses. At the Keogh River on northern Vancouver Island, experimental nutrient addition was conducted from 1983 to 1986 to examine if potential increases in trophic productivity may augment growth and production of salmonid smolts. Subsequently, an applied treatment was conducted over the past decade at the infertile Salmon River to offset intensive logging impacts and to accelerate colonization of steelhead tro
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Geometric Mean Productivity (GMP)"

1

Koné, Alassane, Allyx Fontaine, and Samira El Yacoubi. "COUPLING CELLULAR AUTOMATA WITH MEDALUS ASSESSMENT FOR THE DESERTIFICATION ISSUE." In International Conference on Emerging Trends in Engineering & Technology (IConETech-2020). Faculty of Engineering, The University of the West Indies, St. Augustine, 2020. http://dx.doi.org/10.47412/vqgh6804.

Full text
Abstract:
Desertification is one of the major problems affecting our environment in the 21st century. Indeed, it threatens more than 1.5 million people worldwide and affects a quarter of the land in less than 100 countries, it spreads over half a billion hectares per year and reduces the surface water and groundwater. Thus, according to a report by the Food and Agriculture Organisation written in 1993, the direct and visible impacts of desertification are the damage on crops, on livestock, on the electricity productivity, etc. Indirect impacts are lack of food production, poverty, social upheaval, rural
APA, Harvard, Vancouver, ISO, and other styles
2

Yurchenko, Andrey, and Yulia Fesina. "Water Shut-Off Through the Use of Advanced Thermal and Acoustic Models." In SPE Thermal Well Integrity and Production Symposium. SPE, 2024. https://doi.org/10.2118/223065-ms.

Full text
Abstract:
Abstract Since early 2010s’, horizontal drilling has become the standard practice in developing oil and gas production capacities – it amounts for over 80% of production capacities in USA alone. However, despite countless improvements in technology, many operators are seeking additional insights into explored reservoirs, as lateral wellbores pose numerous challenges, especially when introducing water. Horizontal wells have a larger contact area with the reservoir compared to vertical wells, which means they are more likely to encounter water-bearing zones. This can happen if the well is drille
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!