Relevant bibliographies by topics / Geometrie nástroje

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Geometrie nástroje'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Geometrie nástroje.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Geometrie nástroje"

1

Hvězda, Jiří. "Multi-Zone Models of Combustion and Heat Transfer Processes in SI Engines." Journal of Middle European Construction and Design of Cars 10, no. 2 (2012): 14–22. http://dx.doi.org/10.2478/v10138-012-0008-6.

Full text
Abstract:
Shrnutí Tato práce představuje sadu nově vyvinutých nástrojů implementovatelných do komplexních kódů pro simulaci spalovacích motorů pro zajištění výpočtů týkajících se vysokotlaké části termodynamického cyklu čtyřdobého zážehového motoru. Tento více-zónový simulační nástroj pracuje na základě jednoduché kvazi-dimenzionální metody reflektující reálnou geometrii spalovacího prostoru a používá specifický přístup k popisu chemické transformace složek. V případech abnormálně rychlých chemických reakcí je klasické kinetické schéma adaptivně kombinováno s flexibilní metodou chemické rovnováhy pro zl
APA, Harvard, Vancouver, ISO, and other styles
2

POLÁŠEK, Vladimír, and Lubomír SEDLÁČEK. "DYNAMIC GEOMETRY ENVIRONMENTS AS COGNITIVE TOOL IN MATHEMATIC EDUCATION." Journal of Technology and Information 7, no. 2 (2015): 45–54. http://dx.doi.org/10.5507/jtie.2015.017.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Geometrie nástroje"

1

Berka, Martin. "Vliv geometrie a řezných parametrů nástroje na zbytkové napětí při obrábění tlakových zásobníků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241903.

Full text
Abstract:
This thesis deals with the influence of changes in cutting parameters and tool geometry on residual stress inside the material. I examine the influence by deep drilling. Changing the cutting parameters concerns the alteration of the tool feed and the pressure of the coolant during the process. The influence of tool geometry is studied by using two different single edge cannon drills. The research was realized in cooperation with Bosch Diesel Ltd. The theoretical part includes a description of the injection system, in which a high-pressure container is contained. The high-pressure container was
APA, Harvard, Vancouver, ISO, and other styles
2

Dvořáček, Jan. "Analýza silového zatížení řezného nástroje při pětiosém frézování." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228829.

Full text
Abstract:
The diploma thesis is focused on machining using the ball-end shank mill. Content of the preliminary part of the work is a shank mill characteristic and a consequent part shows a splitting of ball-end milling cutters, its application, the cutting tool geometry and a characteristic signs of machining. The cutting force model of the ball-end mill is presented as well. A part of proposed model is the conversion of the resultant force too. Practical part is aimed at cutting force analysis of the ball-end mill and the main purpose of this part is a quantification of the cutting force for different
APA, Harvard, Vancouver, ISO, and other styles
3

Vala, Jan. "Parametrický geometrický 3D kreslicí nástroj." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2014. http://www.nusl.cz/ntk/nusl-236087.

Full text
Abstract:
Purpose of this thesis is to introduce reader to 3D parametric construction tools and their application with dynamic geometry. Project introduces basic concepts of parametric construction in computer geometry, summary of the state of the art, description of selected parametric geometry software, evaluation of its features and design of 3D parametric geometry library for use in computer graphics followed by implementation of said library and user interface application for evaluation.
APA, Harvard, Vancouver, ISO, and other styles
4

Krajkovič, Pavel. "Optimalizace obráběcích parametrů abradable nástřiků používaných v leteckém průmyslu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231999.

Full text
Abstract:
This thesis is focused on machining of thermal spray coatings. Particularly on testing of machining parameters and their influence on different types of abradable coatings used in the aerospace industry. The aim of research work is to test the parameters, measure cutting forces by using a dynamometer and their impact on the quality of the machined surface. Determination of the optimal machining parameters for different types of coatings based on results of measurements and the evaluation of surface quality. There are also presented techniques of thermal spray application and methods of coating
APA, Harvard, Vancouver, ISO, and other styles
5

Bukáček, Zdeněk. "Technologie obrábění tvrdých materiálů nástroji s definovanou geometrií břitu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228640.

Full text
Abstract:
This master’s thesis is concerned with subject matter hard machining with defined geometry edge tools. Aim master’s thesis is analysis and parameters evaluation machined surface at hard machining. This master’s thesis contain a characteristic of hard materials, used technology for cutting operation, but also tools and cutting conditions suitable for hard machining. In the conclusion are parameters evaluation machined surface the workpiece.
APA, Harvard, Vancouver, ISO, and other styles
6

Barák, Vít. "Volba a optimalizace řezných podmínek pro progresivní výrobní technologie vrtání sdruženým nástrojem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231105.

Full text
Abstract:
The thesis contains theoretical analysis of drilling by twist drill focused on the step drill. The review includes description of the drill geometry, calculation of the basic parameters of drilling, including forces and process optimization. Following is manufacturing process and analysis of the monolithic step drill designed for the required hole parameters. The optimal cutting conditions are necessary to find for the correct function of the tool. The load values of the tool are accurately assessed using a piezoelectric dynamometer, thereby obtaining the overall progress of individual loads.
APA, Harvard, Vancouver, ISO, and other styles
7

Petrlíková, Helena. "Pevnostní analýza řezných nástrojů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229336.

Full text
Abstract:
This work is focused on the stress-strain analysis of a cutting tool. At the beginning, the study of available literature and scientific articles relating the topic is carried out. The solution of stresses and strains in whole real system has been carried out based on the computational simulation using the finite element method (FEM). The work contains a detailed description of the creation of the computational model. Model of geometry of the system has been created in the SolidWorks program. Computational simulation including the solution was implemented in the ANSYS Workbench program as well
APA, Harvard, Vancouver, ISO, and other styles
8

Taušová, Jana. "Nástroje pro 3D modelování ve výuce stereometrie." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-306561.

Full text
Abstract:
TITLE: Tools for 3D modelling in teaching solid geometry AUTHOR: Bc. Jana Taušová DEPARTMENT: Department of Information Technology and Technology Education SUPERVISOR: PhDr. Josef Procházka, Ph.D. ABSTRACT: The key topic of the thesis is the possibility of enhancement of the teaching of solid geometry through a 3D modelling program of choice. The theoretical part of the work defines solid geometry as a branch of mathematics. It furthermore investigates spatial visualization ability as a crucial one for understanding this particular area; and also explains the possibilities of computer program
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography