Log in

Relevant bibliographies by topics / Gland seal

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Gland seal'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gland seal.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gland seal"

1

M., Purusothaman, Sai Teja Nama, Jaswanth Reddy Muddarapu, Pavan Ram Oduri, and Surya Saketh Meka. "Structural Analysis of Mechanical Seal Holding for Mixer Pumps." International Journal of Engineering and Advanced Technology (IJEAT) 9, no. 3 (2020): 3867–72. https://doi.org/10.35940/ijeat.C6367.029320.

Full text

Abstract:

A mechanical seal is a device that used to reduce leakage containing pressure or ignoring contamination. Mechanical seal is the device used in centrifugal Pumps, Mixers, Agitators and Compressors to arrest or reduce the leakage. The mechanical seal standard API 682 provides the design guidelines for the seals which are fits below 110mm shaft diameter and 4.2 N/mm2 seal chamber pressure. Any seal more than these parameters required special engineering or guidelines needs from technical service. The main aim is to design the mechanical seal for more than 110mm shaft diameter and more than 4.2 N/

APA, Harvard, Vancouver, ISO, and other styles

2

Mrzljak, Vedran, Jan Kudláček, Đerzija Begić-Hajdarević, and Jelena Musulin. "The Leakage of Steam Mass Flow Rate through the Gland Seals – Influence on Turbine Produced Power." Journal of Maritime & Transportation Science 58, no. 1 (2020): 39–56. http://dx.doi.org/10.18048/2020.58.03.

Full text

Abstract:

In this paper is presented an analysis of gland seals operation and their influence on the performance of low power steam turbine with two cylinders and steam reheating, which can be used in marine applications. Performed analysis presents a comparison of steam turbine main operating parameters when gland seals operation is neglected (as usual in the most of the literature) and when steam mass flow rates leaked through all gland seals are taken into consideration. Steam mass flow rate leakage through all gland seals reduces produced power of the whole turbine and both of its cylinders. Operati

APA, Harvard, Vancouver, ISO, and other styles

3

Millsaps, K. T., and M. Martinez-Sanchez. "Dynamic Forces From Single Gland Labyrinth Seals: Part II—Upstream Coupling." Journal of Turbomachinery 116, no. 4 (1994): 694–700. http://dx.doi.org/10.1115/1.2929462.

Full text

Abstract:

The standard lumped parameter model for flow in an eccentrically offset labyrinth seal, which assumes constant upstream and downstream boundary conditions, has been extended to include the effects of a nonuniform upstream cavity flow due to coupling. This new model predicts that the upstream perturbations in pressure and azimuthal velocity caused by this coupling can have a very strong impact on the pressure distribution in the seal gland itself. Augmentation by a factor of four, over the uniform inlet model, is predicted under some circumstances. Although no precise comparison to the experime

APA, Harvard, Vancouver, ISO, and other styles

4

Kocijel, Lino, Igor Poljak, Vedran Mrzljak, and Zlatan Car. "Energy Loss Analysis at the Gland Seals of a Marine Turbo-Generator Steam Turbine." Tehnički glasnik 14, no. 1 (2020): 19–26. http://dx.doi.org/10.31803/tg-20191031094436.

Full text

Abstract:

The paper presents an analysis of marine Turbo-Generator Steam Turbine (TGST) energy losses at turbine gland seals. The analyzed TGST is one of two identical Turbo-Generator Steam Turbines mounted in the steam propulsion plant of a commercial LNG carrier. Research is based on the TGST measurement data obtained during exploitation at three different loads. The turbine front gland seal is the most important element which defines TGST operating parameters, energy losses and energy efficiencies. The front gland seal should have as many chambers as possible in order to minimize the leaked steam mas

APA, Harvard, Vancouver, ISO, and other styles

5

Prodan, V. D., G. V. Bozhko, and M. S. Fokina. "Multichamber Face Gland Seal." Chemical and Petroleum Engineering 52, no. 1-2 (2016): 36–39. http://dx.doi.org/10.1007/s10556-016-0144-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Prodan, V. D., G. V. Bozhko, and M. S. Fokina. "Tubeless Face Gland Seal." Chemical and Petroleum Engineering 52, no. 1-2 (2016): 113–15. http://dx.doi.org/10.1007/s10556-016-0158-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lang, S. L. C., S. J. Iverson, and W. D. Bowen. "Individual variation in milk composition over lactation in harbour seals (Phoca vitulina) and the potential consequences of intermittent attendance." Canadian Journal of Zoology 83, no. 12 (2005): 1525–31. http://dx.doi.org/10.1139/z05-149.

Full text

Abstract:

We studied milk composition over the course of lactation in 21 harbour seal (Phoca vitulina L., 1758) females on Sable Island, Nova Scotia. Milk fat content increased significantly from 40.8% ± 1.01% at parturition to 50.2% ± 1.39% at day 7 and then remained relatively constant throughout the remainder of lactation. Changes in dry matter mirrored changes in fat content. Protein content averaged about 9% over mid to late lactation. There was considerable between-individual variation in the composition of milk and how it changed over lactation, particularly in milk fat content (CV 9.1%–11.4%). I

APA, Harvard, Vancouver, ISO, and other styles

8

Ridgway, N., C. B. Colby, and B. K. O’Neill. "Slurry pump gland seal wear." Tribology International 42, no. 11-12 (2009): 1715–21. http://dx.doi.org/10.1016/j.triboint.2009.04.047.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Aliev, V. I., and I. I. Gasanov. "Improving the Sealing Efficiency of Compressor Cylinders of Gas Engine Compressors in the System of Gas-Lift Production of Offshore Fields." Проблемы машиностроения и надежности машин, no. 6 (November 1, 2023): 96–101. http://dx.doi.org/10.31857/s0235711923060044.

Full text

Abstract:

An increase in the efficiency of gland seals in compressor cylinders with cast iron rings pressed against the contact surface of the piston rod using a steel spring in reciprocating compressors used in offshore oil and gas-condensate fields for gas-lift oil production systems is considered. Studies of a gas engine reciprocating compressor working directly on the operating gas-lift system have shown that in order to increase the time of normal operation of gland seals, it is necessary to adjust the clearance using lubricant up to 0.1 mm. After increasing the spring stiffness, the serviceability

APA, Harvard, Vancouver, ISO, and other styles

10

Mardiana, Mardiana, Dwi Yuliaji, and Roy Waluyo. "RANCANG BANGUN SEAL UPGRADE DESIGN PADA SILINDER HIDROLIK CENTER POST MITSUBISHI DENGAN UJI TEKANAN KERJA 140 BAR." AME (Aplikasi Mekanika dan Energi): Jurnal Ilmiah Teknik Mesin 10, no. 2 (2024): 59–66. http://dx.doi.org/10.32832/ame.v10i2.636.

Full text

Abstract:

Silinder hidrolik Center Post Mitsubishi adalah jenis silinder hidrolik double acting, yang diaplikasikan pada mesin curing pencetak ban. Tujuan dari penelitian ini adalah untuk memperoleh seal pengganti OEM yang berfungsi sebagai spare part. Data operating condition atau hasil pendataan di lapangan pada silinder tersebut yaitu temperatur pada tube silinder 85 ⁰C, temperatur pada rod/batang silinder180 °C, tekanan kerja saat beroperasi 100 Bar dan tekanan kerja maksimal nya 140 Bar. Komponen seal yang terpasang pada hidrolik tersebut adalah wiper seal, rod seal + back up, piston seal, rod bear

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Gland seal"

1

Загорулько, Андрій Васильович, Андрей Васильевич Загорулько, Andrii Vasylovych Zahorulko та Е. А. Бондарь. "Анализ механизма смешанной смазки пары трения радиального сальникового уплотнения". Thesis, Изд-во СумГУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/5955.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Панченко, Б. М., Сергій Миколайович Гудков, Сергей Николаевич Гудков та Serhii Mykolaiovych Hudkov. "Віртуальний лабораторний стенд для дослідження сальникових ущільнень". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/47025.

Full text

Abstract:

Останнім часом віртуальні лабораторні роботи стають все більш поширеними в системі інженерної освіти. Це пов’язано зі зниженням фінансових затрат, скороченням часу на проведення фізичного експерименту, а також вони дають можливість більш якісно підготувати фахівців відповідної галузі. Головною метою створення віртуальних лабораторних робіт є збереження враження виконання їх в реальних умовах. Тому розробка віртуальних робіт є досить актуальною. Віртуальні лабораторні роботи повинні бути логічними, простими в керуванні, в них повинні бути закладені математичні моделі досліджуваних об’єктів або

APA, Harvard, Vancouver, ISO, and other styles

3

Millsaps, Knox Taylor. "The impact of unsteady swirling flow in a single gland labyrinth seal on rotordynamic stability : theory and experiment." Thesis, Massachusetts Institute of Technology, 1992. http://hdl.handle.net/1721.1/43281.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Назаренко, О. О. "Розрахунок сальникового ущільнення з корпусом, що деформується". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39751.

Full text

Abstract:

Недоліком радіальних сальникових ущільнень є нерівномірність контактного тиску по довжині пакета набивки, що веде до перевантаження окремих ділянок та до скорочення ресурсу ущільнення. Цей недолік усувається в конструкції сальникового ущільнення з корпусом, що деформуэться, в якому тиск вирівнюється не тільки по довжині але й по колу.

APA, Harvard, Vancouver, ISO, and other styles

5

Святашова, А. В., Сергій Миколайович Гудков, Сергей Николаевич Гудков та Serhii Mykolaiovych Hudkov. "Розрахунок торцевого сальникового ущільнення з урахуванням шорсткості сальникової набивки". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39752.

Full text

Abstract:

Торцеві сальникові ущільнення відносяться до контактних ущільнень, в яких герметичність досягається за рахунок усунення зазору між ущільнювальними поверхнями. Одним з елементів пари тертя торцевого сальникового ущільнення є роз’ємне кільце сальникової набивки, яке по своїй структурі має плетену форму, а, отже, в ході роботи ущільнення на робочій поверхні буде утворюватися рельєфна – шорстка поверхня, через яку буде проходити основна частина витоків через ущільнення.

APA, Harvard, Vancouver, ISO, and other styles

6

Hamann, Mark. "Reproductive cycles, interrenal gland function and lipid mobilisation in the green sea turtle Chelonia mydas /." St. Lucia, Qld, 2002. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe16903.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Vítek, Tomáš. "Parní kondenzační turbína malého výkonu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400497.

Full text

Abstract:

The goal of this Master’s thesis is to create the design of a low power condensing steam turbine. The turbine has a Curtis control stage and a reaction blading. The work also contains the calculation of gland labyrinth seals and the balancing piston, specification of a forces and losses at bearings. Finally, the gearbox and generator are selected and the efficiency at generator’s clamps is specified. The Master’s thesis includes the design drawing of a longitudinal turbine view.

APA, Harvard, Vancouver, ISO, and other styles

8

Ridgway, Nigel Ian. "Slurry pump gland seal three body wear and the influence of particle properties including hardness, size, fracture toughness and shape." Thesis, 2010. http://hdl.handle.net/2440/63525.

Full text

Abstract:

Gland sealing has been researched since the 1950’s by the British Hydraulic Research Association and others to improve seal performance. The literature review showed the focus had been on uniform packing compression to more closely match the packing pressure distribution to the fluid pressure with the objective of reducing leakage over time. There was limited work on the tribology of gland sealing and the patents were dominated by seal designs in a liquor environment. The review identified the particle properties of hardness, shape, fracture toughness and size as relevant to the wear and

APA, Harvard, Vancouver, ISO, and other styles

9

Reina, Richard David. "Regulation of salt gland function in the green sea turtle, Chelonia mydas." Phd thesis, 1996. http://hdl.handle.net/1885/144440.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Brinca, Lilia. "Characterization of sea bream (Sparus aurata L.) prolactin and control of release from pituitary gland." Doctoral thesis, 2004. http://hdl.handle.net/10400.1/7361.

Full text

Abstract:

Tese de Doutoramento, Ciência Biológicas, Faculdade de Ciências do Mar e do Ambiente, Universidade do Algarve, 2004<br>The sea bream {Sparus aurata L.) is an important aquaculture species along the Mediterranean coast. Prolactin (PRL) released by the pituitary gland play a central role in controlling several aspects of sea bream physiology. In this study, we examined the effect of several internai and externai factors on the activity of PRL cells in cultured pituitary glands. Sea bream pituitaries were cultured during 18hrs at 21ºC and the hormones present in the culture médium separated b

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Gland seal"

1

Albright, Fuller. Uncharted seas. Kalmia Press, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Watts, Franklin. I'm Glad There Are ...: Oceans and Seas. Hachette Children's Group, 2022.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Turner, Tracey, and Fiona Powers. I'm Glad There Are ...: Oceans and Seas. Hachette Children's Group, 2023.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sanders, Trish. Consious Business : Energy Medicine: The Pineal Gland, Seat of the Soul. Education Resources, LLC, 2023.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Schroeder, Urs von. Swissair 1931 - 2002. Aufstieg, Glanz und Ende einer Airline. Huber, Frauenfeld, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Gland seal"

1

Neidel, A., B. Fischer, M. Giller, T. Gädicke, and E. Engert. "Metallurgical Failure Analysis of the Fractured Ring of a Gland Seal: Hydrogen Embrittlement? Factography can be Ambiguous." In Schadensfallanalysen metallischer Bauteile 2. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-3-446-47053-8_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Neidel, A., B. Fischer, M. Giller, T. Gädicke, and E. Engert. "Metallurgical Failure Analysis of the Fractured Ring of a Gland Seal: Hydrogen Embrittlement? Factography can be Ambiguous | Werkstofftechnische Schadensanalyse des gebrochenen Ringes einer Stopfbuchse: Wasserstoffversprödung? Mehrdeutige Fraktographie." In Schadensfallanalysen metallischer Bauteile 2, 2nd ed. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.3139/9783446470538.018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Martini, Leonard J. "Static and Reciprocating Seal Applications: Clearing up the Confusion Between the Military and Industrial O-Ring Gland Specifications." In Practical Seal Design. Routledge, 2018. http://dx.doi.org/10.1201/9780203744109-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sharp, Julie A., Kylie N. Cane, Christophe Lefevre, John P. Y. Arnould, and Kevin R. Nicholas. "Fur Seal Adaptations to Lactation: Insights into Mammary Gland Function." In Current Topics in Developmental Biology. Elsevier, 2005. http://dx.doi.org/10.1016/s0070-2153(05)72006-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Iverson, Sara J. "Milk secretion in marine mammals in relation to foraging: can milk fatty acids predict diet?" In Marine Mammals: Advances in Behavioural and Population Biology. Oxford University PressOxford, 1993. http://dx.doi.org/10.1093/oso/9780198540694.003.0015.

Full text

Abstract:

Abstract Patterns of milk composition and delivery differ greatly among mammals. However, despite these species-specific differences, lactation is very expensive in all species and thus diet and nutrient reserves of individual females must play a critical role in lactation performance. Pinnipeds, as well as mysticete whales, exhibit extreme adaptations to the constraints imposed by the separation of maternal feeding from milk transfer. This paper will consider three main questions: (1) how are milk secretion processes adapted to the temporal separation of foraging and milk secretion; (2) how a

APA, Harvard, Vancouver, ISO, and other styles

6

"Rod Seals, Gland Seals, Gland Packings." In Encyclopedia of Tribology. Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_101134.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Leyzerovich, Alexander S. "Design of Steam Path, Blading, Gland Seals, and Valves." In Steam Turbines for Modern Fossil-Fuel Power Plants. River Publishers, 2021. http://dx.doi.org/10.1201/9781003151388-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Wilson, Keith P. "“The child was ‘right glad’ to get home”." In Family War Stories. Fordham University Press, 2024. http://dx.doi.org/10.5422/fordham/9781531505394.003.0008.

Full text

Abstract:

Chapter 7 is a coming-of-age story which describes Orrin Jr.’s visit to the camps of Benjamin and Daniel. Orrin sanctioned Orrin Jr.’s visit primarily because he wanted to expose him to some of the harsh realities of army life and thereby remove his enthusiasm to enlist. During his visit, Orrin Jr. took a particular interest in Black soldiers. He believed competent white officers who subjected the former slaves to strict training could remove many of the degrading influences of slavery, raise the slaves to manhood, and make them good soldiers. Although Orrin Jr. believed his visit would seal m

APA, Harvard, Vancouver, ISO, and other styles

9

Thomson, Peter. "160°." In Sacred Sea. Oxford University Press, 2007. http://dx.doi.org/10.1093/oso/9780195170511.003.0030.

Full text

Abstract:

If you missed the fences and the swath of open land in the woods that mark the border, you can’t help but notice that you’ve finally left Russia because the human presence beyond the windows of the train is no longer disheveled. Finland shares a long history of tension with its huge and powerful neighbor to the east, but I wonder if having to share such a long border with Russia galls the Finns most of all because everything in their country is so orderly, while everything in Russia is such a mess. The immediate difference crossing between these two countries may well be more stark than betwee

APA, Harvard, Vancouver, ISO, and other styles

10

Sanchez Piñero, Francisco, and Rolf L. Aalbu. "Tenebrionid Beetles." In Island Biogeography in the Sea of Cortés II. Oxford University Press, 2002. http://dx.doi.org/10.1093/oso/9780195133462.003.0012.

Full text

Abstract:

Desert islands in the Sea of Cortés are inhabited by a rich arthropod fauna. Although the seemingly barren landscape may appear devoid of arthropods at midday, at night one may often see members of one of the dominant groups of animals on the islands, the tenebrionid beetles. Highly variable in shape and size, the Tenebrionidae are one of the most highly evolved and diverse families of beetles. Tenebrionidae is perhaps the fifth largest beetle family (>2000 genera), and about half of these are uniquely adapted to arid environments and form a dominant group in desert ecosystems (Crawford 199

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gland seal"

1

Mazur, Zdzislaw, Luis M. Palacios, and Gustavo Urquiza. "Gland Seal Erosion in a Geothermal Turbine." In International Joint Power Generation Conference collocated with TurboExpo 2003. ASMEDC, 2003. http://dx.doi.org/10.1115/ijpgc2003-40014.

Full text

Abstract:

Excessive erosion of the low-pressure shaft end gland seal of a 25 MW geothermal turbine has been investigated. Due to excessive erosion of the gland seal rotor surface the turbine vacuum was partially destroyed and the efficiency of the cycle degraded. This study uses computational fluid dynamics (CFD) to identify the causes of erosion and the optimal steam seal system flow conditions for reducing the erosion problem. The predictions were based upon a numerical calculation using a CFD model of the rotor end gland seal with a steam flow containing hard solid particles and solved with the comme

APA, Harvard, Vancouver, ISO, and other styles

2

Millsaps, Knox T., and William C. Williston. "Synchronous Rotor Vibration Driven by Fluid Forces From a Geometrically Imperfect Labyrinth Seal." In ASME 1995 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/95-gt-362.

Full text

Abstract:

The radial force acting on a rotor, due to an asymmetric pressure distribution inside the seal gland, generated from a slightly non-circular single gland labyrinth seal rotating inside a circular outer casing is investigated theoretically. A fluid mechanical lumped parameter model for the flow in and out of the seal as well as the flow around the gland in the seal is developed. The model includes first and second knife imperfections as well as rotating gland depth variations. Knife non-circularity on the rotor may be due to manufacturing tolerances or defects from in service wear damage. An ap

APA, Harvard, Vancouver, ISO, and other styles

3

Millsaps, Knox T., and Manuel Martinez-Sanchez. "Dynamic Forces From Single Gland Labyrinth Seals: Part II — Upstream Coupling." In ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/93-gt-322.

Full text

Abstract:

The standard lumped parameter model for flow in an eccentrically offset labyrinth seal, which assumes constant upstream and downstream boundary conditions, has been extended to include the effects of a non-uniform upstream cavity flow due to coupling. This new model predicts that the upstream perturbations in pressure and azimuthal velocity caused by this coupling, can have a very strong impact on the pressure distribution in the seal gland itself. Augmentation by a factor of four, over the uniform inlet model, is predicted under some circumstances. Although no precise comparison to the experi

APA, Harvard, Vancouver, ISO, and other styles

4

Guo, Yanan, Danmei Xie, Xiangjun Huang, Huabing Zheng, Ziyue Mei, and Hengliang Zhang. "Numerical Study on Deformation of Gland Seal Housing at LP Ends on a Nuclear Steam Turbine." In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-76277.

Full text

Abstract:

The rubbing between static and moving parts of steam turbine is one of the frequent faults and difficult to diagnose accurately. In the high-speed rotation of steam turbine, if the clearance between the static and moving parts is too small, there is a possibility of rubbing accident, especially for the ends of LP steam turbine in a nuclear power plant, which will affect the safety operation of the steam turbine. In this paper, the gland seal housing deformation of LP casing in 1000MW nuclear steam turbine is calculated and analyzed. Based on ProE and ANSYS/Workbench software, the 3D geometry m

APA, Harvard, Vancouver, ISO, and other styles

5

Stein, Peter, Dominik Born, and Martin König. "Measurements of the Leakage Through a High Pressure Steam Turbine Power Plant Gland Seal." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63405.

Full text

Abstract:

Today’s power market asks for highly efficient turbines which can operate at a maximum flexibility, achieving a high lifetime and all of this on competitive product investments. In line with the demands for reduction of CO2, the machine efficiencies are continuously increased. To further increase efficiencies, deeper insight into the single components is required to better understand the individual contributions to the overall performance. This work focuses on the measurement of leakages through High Pressure Steam Turbine gland sealing. Gland sealing technologies are frequently in focus of re

APA, Harvard, Vancouver, ISO, and other styles

6

Song, Bum Ho, and Seung Jin Song. "Lateral Forces From Single Gland Rotor Labyrinth Seals in Turbines." In ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30335.

Full text

Abstract:

Even though interest in labyrinth seal flows has increased recently, an analytical model capable of predicting turbine flow response to labyrinth seals is still lacking. Therefore, this paper presents a new model to predict flow response in an axial turbine stage with a shrouded rotor. A concentric model is first developed, and this model is used to develop an eccentric model. Basic conservation laws are used in each model, and a non-axisymmetric sealing gap is prescribed for the eccentric model. Thus, the two models can predict the evolution of a uniform upstream flow into a non-uniform downs

APA, Harvard, Vancouver, ISO, and other styles

7

Kim, Woo June, and Seung Jin Song. "Rotordynamic Forces Due to Rotor Sealing Gap in Axial Turbines." In ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/gt2003-38616.

Full text

Abstract:

Turbines have been susceptible to flow-induced vibration. In such vibrations, direct damping and cross stiffness effects of aerodynamic forces determine rotordynamic stability. Previous research efforts have been focused mostly on either isolated labyrinth seals or unshrouded turbines. Recently, steady flow in a turbine with a statically offset shrouded rotor has been modeled, and some stiffness predictions have been obtained. The model couples the seal flow to the main passage flow and uses a small perturbation approach to determine non-axisymmetric flow conditions. Seal gland pressure asymme

APA, Harvard, Vancouver, ISO, and other styles

8

Roeseler, Stefan, Erin Volpe, Ryan Plessinger, et al. "Characterization of Orientation Effects of Spring Energized Seals Using 2D Simulations." In ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/gt2024-129228.

Full text

Abstract:

Abstract Spring energized seals, such as C-Rings, employ use of a high strength spring (Alloy-90, Alloy 718 etc.) within a soft jacket and hard liner (optional) to create high load, high performance seals. This seal design maintains its highperformance sealing capability due to the high contact pressure between the hardware and the seal jacket that is created due to the combination of the spring and optional liner. As such, spring-energized seals are widely used in critical applications such as nuclear energy and aerospace. As seal environments become more challenging, C-Rings must undergo hig

APA, Harvard, Vancouver, ISO, and other styles

9

Kaleshian, Joseph, Ray Clark, Henri Azibert, and Michael Grimanis. "A method of direct thermal conditioning of mechanical seal faces: CFD, empirical analysis and testing." In International Sealing Conference. VDMA Fluidtechnik, 2024. http://dx.doi.org/10.61319/aw0ucdtv.

Full text

Abstract:

"Existing API flush plans provide indirect cooling conditions for mechanical seals not only to enhance the durability of the seal but also contribute to the overall efficiency and performance of the machinery. This concept thermally conditions the mechanical seal faces by circulating cooling or heating fluid directly through a process isolated flow channel formed by a specially designed stationary seal ring and a modified seal gland. Test results under both wet and dry running conditions at low rates of coolant flow exhibited significant performance improvement. An exponential increase in dry

APA, Harvard, Vancouver, ISO, and other styles

10

Ryadinskaya, N. I., and A. A. Molkova. "Extraorganic arterial blood supply to the thyroid gland in Baikal seal (Phoca sibirica Gmelin)." In Marine mammals of the Holarctic. Marine Mammal Council, 2019. http://dx.doi.org/10.35267/978-5-9904294-0-6-2019-1-282-288.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Gland seal"

1

Wilkowski and Eiber. L51701 Determination of Clamp Repairable Leaks. Pipeline Research Council International, Inc. (PRCI), 1993. http://dx.doi.org/10.55274/r0010113.

Full text

Abstract:

Once a leak in a subsea pipeline has been located, there are several methods available to deal with it. These range in cost and difficulty from relaying the line to clamping. Clamping is obviously the quickest and least expensive method. However, there are not clear guidelines as to where clamp repair is applicable. The object of this project is to explore the limits of a dent which may be sealed by a clamp. This is to determine whether or not a particular dent can be sealed by the prototype clamp. This work was done with the aid of non-linear finite element analysis of a typical rubber seal u

APA, Harvard, Vancouver, ISO, and other styles

2

Smith, G. V., and B. E. Lewis. Design of a pulsed-mode fluidic pump using a venturi-like reverse flow diverter. [With no packing glands, mechanical seals or moving parts]. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/6806996.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!