Relevant bibliographies by topics / Glas GmbH

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Glas GmbH'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Glas GmbH.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Glas GmbH"

1

Križanac, I., A. Vukadin, E. Ðermić, and B. Cvjetković. "First Report of Fire Blight Caused by Erwinia amylovora on Cotoneaster dammeri cv. Skogholm in Croatia." Plant Disease 92, no. 10 (October 2008): 1468. http://dx.doi.org/10.1094/pdis-92-10-1468a.

Full text
Abstract:
In July of 2007, fire blight symptoms were observed on Cotoneaster dammeri cv. Skogholm in a nursery near Županja, Vukovarsko-Srijemska County, in eastern Croatia. In this region, the first outbreak of fire blight was noted on apple in 1995 (2). Symptoms on cotoneaster were necrotic shoots and petioles. Immunofluorescence assay (IFA) with polyclonal antibodies (Loewe Biochemica GmbH, Sauerlach, Germany) was performed on extracts from blighted C. dammeri cv. Skogholm shoots and were found to be positive for Erwinia amylovora. Round, mucoid, whitish colonies were isolated from extracts of plant tissues with symptoms of fire blight spread on King's medium B and incubated for 2 days at 28°C. Bacterial ooze and necrosis of the inoculation site were observed on immature pear fruits inoculated with a 106 CFU/ml suspension of the isolate. Bacteria were reisolated and the species identity was confirmed by PCR and primers targeting pEA29 DNA (1). E. amylovora was previously reported only on native Cotoneaster spp. (3). To our knowledge, this is the first report of fire blight on C. dammeri cv. Skogholm from a commercial ornamental nursery in Croatia. References: (1) S. Bereswill et al. Appl. Environ. Microbiol. 58:3522, 1992. (2) B. Cvjetković et al. Glas. zaštite bilja 1:13, 1996. (3) E. Halupecki et al. Eur. J. Plant Pathol. 114:435, 2006.
APA, Harvard, Vancouver, ISO, and other styles
2

Gruescu, C., I. Nicoara, D. Popov, R. Bodea, and H. Hora. "Optical glass compatibility for the design of apochromatic systems." Science of Sintering 40, no. 2 (2008): 131–40. http://dx.doi.org/10.2298/sos0802131g.

Full text
Abstract:
The design of apochromatic systems is difficult because of two problems: the glass sorts compatibility and the c1/ca arbitrary input ratio. The optical glass manufacturers offer a wide range of sorts, so that the choice of triplet compatible glasses becomes itself an important separate problem. The paper provides a solution of mathematical modeling for the glass compatibility and, practically, analyses the sorts presented by Schott GmbH. The original software provided 22 compatible glass triplets. The authors explored the possibilities of enlarging the c1/ca ratio from the value 0.6 indicated in the literature to a range of [0.5?0.8]. Therefore, they designed and analyzed a set of 88 triplets. A correct glass choice can insure twice-larger apertures than the traditional ones for best quality apochromats (diffraction-limited).
APA, Harvard, Vancouver, ISO, and other styles
3

Corke, C. C., and M. D. Archer. "The electrochemical corrosion of an Fe74Cr6P13C7 metallic glass produced by vacuumschmelze GmbH." Corrosion Science 28, no. 4 (January 1988): 353–69. http://dx.doi.org/10.1016/0010-938x(88)90056-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Geerts, Sabine O., Laurence Seidel, Adelin I. Albert, and Audrey M. Gueders. "Microleakage after Thermocycling of Three Self-Etch Adhesives under Resin-Modified Glass-Ionomer Cement Restorations." International Journal of Dentistry 2010 (2010): 1–6. http://dx.doi.org/10.1155/2010/728453.

Full text
Abstract:
This study was designed to evaluate microleakage that appeared on Resin-Modified Glass-Ionomer Cement (RMGIC) restorations. Sixty class V cavities () were cut on thirty extracted third molars, which were randomly allocated to three experimental groups. All the buccal cavities were pretreated with polyacrylic acid, whereas the lingual cavities were treated with three one-step Self-Etch adhesives, respectively, Xeno III (Dentsply Detrey GmbH, Konstanz, Germany), iBond exp (Heraeus Kulzer gmbH & Co. KG, Hanau, Germany), and Adper Prompt-L-Pop (3M ESPE AG, Dental products Seefeld, Germany). All cavities were completely filled with RMGIC, teeth were thermocycled for 800 cycles, and leakage was evaluated. Results were expressed as means standard deviations (SDs). Microleakage scores were analysed by means of generalized linear mixed models (GLMMs) assuming an ordinal logistic link function. All results were considered to be significant at the 5% critical level (). The results showed that bonding RMGIC to dentin with a Self-Etch adhesive rather than using polyacrylic acid did not influence microleakage scores (), except for one tested Self-Etch adhesive, namely, Xeno III (). Nevertheless, our results did not show any significant difference between the three tested Self-Etch adhesive systems. In conclusion, the pretreatment of dentin with Self-Etch adhesive system, before RMGIC filling, seems to be an alternative to the conventional Dentin Conditioner for the clinicians as suggested by our results (thermocycling) and others (microtensile tests).
APA, Harvard, Vancouver, ISO, and other styles
5

Bittner, Tomáš, Petr Bouška, Michaela Kostelecká, and Miroslav Vokáč. "Experimental Investigation of Mechanical Properties of Textile Glass Reinforcement." Applied Mechanics and Materials 732 (February 2015): 45–48. http://dx.doi.org/10.4028/www.scientific.net/amm.732.45.

Full text
Abstract:
Mechanical tests were performed at the Klokner Institute on samples of a textile glass reinforcement. These tests will be used for determining the modulus of elasticity of textile glass reinforcements and for assessing the maximal stress that the samples will withstand. Both of these quantities are required for further modeling of the structures and for designing elements made from textile reinforced concrete (TRC). The tests were carried out on a total of 10 samples made from a single piece of 2D net (produced by V. FRAAS, GmbH, Germany). The tests were carried out on AR-glass reinforcement (alkali - resistant glass) textile glass with 2400 TEX [g/km] fineness, which is often supplied with dimensions of 1 x 2 m. The first 5 samples were prepared in the direction of the warp (the direction of the load-bearing reinforcement), and the remaining 5 samples were prepared from the transverse direction (the direction of the weft). These samples were loaded by a constant force increasing up to collapse. Then the modulus of elasticity of the textile glass reinforcement and the stress at the strength limit were determined from the monitored data.
APA, Harvard, Vancouver, ISO, and other styles
6

Kontonasaki, Eleana, K. Papazisis, Lambrini Papadopoulou, T. Zorba, A. Kortsaris, P. Garefis, Konstantinos M. Paraskevopoulos, and Petros Koidis. "Expression of Bioactivity and Biocompatibility Testing of Bioactive Glass Modified Zinc Phosphate Luting Cement." Key Engineering Materials 309-311 (May 2006): 813–16. http://dx.doi.org/10.4028/www.scientific.net/kem.309-311.813.

Full text
Abstract:
The bioactivity and biocompatibility of a zinc phosphate luting cement (HARVARD, Richter & Hoffmann, Dental-GmbH, Berlin) which was modified by Bioglass® (PerioGlas® Synthetic Bone Graft Particulate, US Biomaterials), was evaluated in vitro with human lung fibroblasts (MRC-5), baby hamster kidney fibroblasts (BHK) and rat pulp cells (RPC) by XTT and BrdU assays. A thin Ca-P layer was grown on the surface of Bioglass®-modified zinc phosphate cement specimens after immersion in SBF for 7 days and remained constant after 16 days immersion time. The incorporation of Bioglass® powder in zinc phosphate specimens resulted in equal or increased cell attachment and activity for almost all cell lines examined without any apparent impact on mechanical or physicochemical properties of the cement, although this needs further documentation. The combination of these two methods in determining the biocompatibility of Bioglass®-modified zinc phosphate cements showed that cells not only attached well on modified specimens but were actively synthesizing DNA after 72h of incubation.
APA, Harvard, Vancouver, ISO, and other styles
7

Ryu, Su-Kyoung, Gye-Jeong Oh, Jin-Ho Kang, Jae-Gon Jang, Kumaresan Sakthiabirami, Byung-Kwon Moon, Kyung-Ku Lee, et al. "Wear Behavior of the Human Enamel Antagonist to Different Glazed Zirconia." Journal of Nanoscience and Nanotechnology 20, no. 9 (September 1, 2020): 5676–79. http://dx.doi.org/10.1166/jnn.2020.17657.

Full text
Abstract:
In this study, the wear behavior of glazed zirconia was investigated to the antagonist with human enamel after simulated mastication. Twenty Y-TZP specimens were divided into 4 groups: untreated zirconia (Z), glazed zirconia with IPS e.max Ceram (GZE), glazed zirconia with VITA AKZENT® Plus (GZV), and glazed zirconia with glass (GZG). Glazing glass was mainly composed of SiO2, B2O3, Al2O3, Na2O and K2O (nearly 91 wt%). The surface roughness of the specimens was evaluated using roughness profiler. The maxillary premolar teeth were selected as the antagonist. The wear of human enamel against human enamel was used as a control. Five-disc specimens per group were subjected to chewing stimulation CS-4 (SD Mechatronic GmbH, Germany) for 240,000 cycles against human enamel. The wear loss of antagonistic teeth was calculated using a three-dimensional profiling system and the volume loss of the tooth was scanned using a 3D scanner. 3D data obtained before and after testing were overlapped using 3D software (Dentacian Software, EZplant, Korea). The wear loss of glazed zirconia GZE, GZV and GZG groups showed significantly lower than that of human enamel. Whereas, the zirconia (Z) group exhibits significantly lower volume loss than glazed zirconia and enamel. These results show that the wear of the glazing glass is comparable to other commercial glazing materials. Glazing materials are both more susceptible to wear the antagonist relative to zirconia.
APA, Harvard, Vancouver, ISO, and other styles
8

Bannister, Stephanie, Stephen Kidd, Elizabeth Kirby, Sonal Shah, Anvy Thomas, Richard Vipond, Michael Elmore, et al. "Development and Assessment of a Diagnostic DNA Oligonucleotide Microarray for Detection and Typing of Meningitis-Associated Bacterial Species." High-Throughput 7, no. 4 (October 16, 2018): 32. http://dx.doi.org/10.3390/ht7040032.

Full text
Abstract:
Meningitis is commonly caused by infection with a variety of bacterial or viral pathogens. Acute bacterial meningitis (ABM) can cause severe disease, which can progress rapidly to a critical life-threatening condition. Rapid diagnosis of ABM is critical, as this is most commonly associated with severe sequelae with associated high mortality and morbidity rates compared to viral meningitis, which is less severe and self-limiting. We have designed a microarray for detection and diagnosis of ABM. This has been validated using randomly amplified DNA targets (RADT), comparing buffers with or without formamide, in glass slide format or on the Alere ArrayTubeTM (Alere Technologies GmbH) microarray platform. Pathogen-specific signals were observed using purified bacterial nucleic acids and to a lesser extent using patient cerebral spinal fluid (CSF) samples, with some technical issues observed using RADT and glass slides. Repurposing the array onto the Alere ArrayTubeTM platform and using a targeted amplification system increased specific and reduced nonspecific hybridization signals using both pathogen nucleic and patient CSF DNA targets, better revealing pathogen-specific signals although sensitivity was still reduced in the latter. This diagnostic microarray is useful as a laboratory diagnostic tool for species and strain designation for ABM, rather than for primary diagnosis.
APA, Harvard, Vancouver, ISO, and other styles
9

Padnuru Sripathy, Akshay, Cindy Handjaja, Vyasaraj Manakari, Gururaj Parande, and Manoj Gupta. "Development of Lightweight Magnesium/Glass Micro Balloon Syntactic Foams Using Microwave Approach with Superior Thermal and Mechanical Properties." Metals 11, no. 5 (May 18, 2021): 827. http://dx.doi.org/10.3390/met11050827.

Full text
Abstract:
Magnesium matrix syntactic foams (MgMSFs) are emerging lightweight materials with unique capabilities to exhibit remarkable thermal, acoustic, and mechanical properties. In the current study, lightweight glass micro balloon (GMB)-reinforced Mg syntactic foams were synthesized via the powder metallurgy technique using hybrid microwave sintering. The processing employed in the study yielded MgMSFs with refined grain sizes, no secondary phases, and reasonably uniform distributions of hollow reinforcement particles. The developed MgMSFs exhibited densities 8%, 16%, and 26% lower than that of the pure Mg. The coefficient of thermal expansion reduced (up to 20%) while the ignition resistance improved (up to 20 °C) with the amount of GMB in the magnesium matrix. The MgMSFs also exhibited a progressive increase in hardness with the amount of GMB. Although the MgMSFs showed a decrease in the yield strength with the addition of GMB hollow particles, the ultimate compression strength, fracture strain, and energy absorption capabilities increased noticeably. The best ultimate compression strength at 321 MPa, which was ~26% higher than that of the pure Mg, was displayed by the Mg-5GMB composite, while the Mg-20GMB composite showed the best fracture strain and energy absorption capability, which were higher by ~39 and 65%, respectively, when compared to pure Mg. The specific strength of all composites remained superior to that of monolithic magnesium. Particular efforts were made in the present study to interrelate the processing, microstructural features, and properties of MgMSFs.
APA, Harvard, Vancouver, ISO, and other styles
10

Dziuk, Yasemin, Sachin Chhatwani, Stephan C. Möhlhenrich, Sabrina Tulka, Ella A. Naumova, and Gholamreza Danesh. "Fluoride release from two types of fluoride-containing orthodontic adhesives: Conventional versus resin-modified glass ionomer cements—An in vitro study." PLOS ONE 16, no. 2 (February 26, 2021): e0247716. http://dx.doi.org/10.1371/journal.pone.0247716.

Full text
Abstract:
Introduction Development of white spot lesions (WSLs) during orthodontic treatment is a common risk factor. Fixation of the orthodontic appliances with glass ionomer cements could reduce the prevalence of WSL’s due to their fluoride release capacities. The purpose of this study was to evaluate differences of fluoride release properties from resin-modified and conventional glass ionomer cements (GICs). Methods The resin-modified GICs Fuji ORTHO LC (GC Orthodontics), Meron Plus QM (VOCO), as well as the conventional GICs Fuji ORTHO (GC Orthodontics), Meron (VOCO) and Ketac Cem Easymix (3M ESPE) were tested in this study. The different types of GICs were applied to hydroxyapatite discs according to the manufacturer’s instructions and stored in a solution of TISAB III (Total Ionic Strength Adjustment Buffer III) and fluoride-free water at 37°C. Fluoride measurements were made after 5 minutes, 2 hours, 24 hours, 14 days, 28 days, 2 months, 3 months and 6 months. One factor analysis of variance (ANOVA) was used for the overall comparison of the cumulative fluoride release (from measurement times of 5 minutes to 6 months) between the different materials with the overall level of significance set to 0.05. Tukey’s post hoc test was used for post hoc pairwise comparisons in the cumulative fluoride release between the different materials. Results The cumulative fluoride release (mean ± sd) in descending order was: Fuji ORTHO LC (221.7 ± 10.29 ppm), Fuji ORTHO (191.5 ± 15.03 ppm), Meron Plus QM (173.0 ± 5.89 ppm), Meron (161.3 ± 7.84 ppm) and Ketac Cem Easymix (154.6 ± 6.09 ppm) within 6 months. Analysis of variance detected a significant difference in the cumulative fluoride release between at least two of the materials (rounded p-value < 0.001). Pairwise analysis with Tukey’s post hoc test showed a significant difference in the cumulative fluoride release for all the comparisons except M and MPQM (p = 0.061) and KCE and M (p = 0.517). Conclusion Fluoride ions were released cumulatively over the entire test period for all products. When comparing the two products from the same company (Fuji ORTHO LC vs. Fuji ORTHO from GC Orthodontics Europe GmbH and Meron Plus QM vs. Meron from VOCO GmbH, Mannheim, Germany), it can be said that the resin-modified GICs have a higher release than conventional GICs. The highest individual fluoride release of all GICs was at 24 hours. A general statement, whether resin-modified or conventional GICs have a higher release of fluoride cannot be made.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Glas GmbH"

1

Kreir, Mohamed [Verfasser]. "Lipid membranes on microstructured glass : Electrophysiological single channels recordings of reconstituted proteins / Mohamed Kreir. Nanion Technologies GmbH." Bremen : IRC-Library, Information Resource Center der Jacobs University Bremen, 2010. http://d-nb.info/1034989294/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kantzer, Christina Geraldine [Verfasser], and Elena I. [Akademischer Betreuer] Rugarli. "Astrocyte cell surface marker phenotyping: Identification of multipotent ACSA-2-/GLAST+ cerebellar progenitor cells / Christina Geraldine Kantzer. Miletenyi Biotec GmbH. Gutachter: Elena I. Rugarli." Köln : Universitäts- und Stadtbibliothek Köln, 2015. http://d-nb.info/1073969886/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schreiber, Nicole [Verfasser]. "Bioresorbierbare Membran und bioaktives Glas in der Behandlung von Furkationsdefekten Grad II und III bei Patienten mit generalisierter aggressiver Parodontitis : Egebnisse einer klinischen und radiologischen Prospektivstudie ; in Zusammenarbeit mit dem Universitätsklinikum Gießen und Marburg GmbH, Standort Marburg / vorgelegt von Nicole Schreiber." 2008. http://d-nb.info/99049408X/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Glas GmbH"

1

Bigelow, Taylor John, ed. Swarovski: The magic of crystal. New York: H.N. Abrams, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Franz Mayer of Munich. Hirmer Publishers, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Glas GmbH"

1

Strigl, Alfred W. "Erfahrungen im ONR 192500 Einführungs- und Zertifizierungsprozess bei der Austria Glas Recycling GmbH." In Forschung und Praxis an der FHWien der WKW, 215–32. Wiesbaden: Springer Fachmedien Wiesbaden, 2016. http://dx.doi.org/10.1007/978-3-658-11825-9_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Glas GmbH"

1

Mandisloh, Kristin, Sven Achenbach, Timo Mappes, Tilmann Rogge, and Roman Truckenmueller. "Submicron Polymer Flow Cells." In ASME 4th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2006. http://dx.doi.org/10.1115/icnmm2006-96147.

Full text
Abstract:
This paper investigates the fabrication processes of polymer micro channels integrated into flow cells. The cross sectional dimensions of these flow cell channels are in the range of microns containing structures or structure details in the submicron range. Single-component and double-component cells are presented. Single-component cells are entirely made of one polymer. They are composed of a micro structured substrate and a cover plate to hermetically seal the subjacent microfluidic structures. Flexible fluidic ports are added to facilitate interfacing. Polymethylmethacrylate (PMMA) is used as an industrially prefabricated foil (HESA®Glas VOS; HESA®Glas HESAlite). Double-component cells are made of spincoated PMMA (MicroChem 950k PMMA A11; AllResist GmbH 950k PMMA A9) that is micro structured on glass substrates prior to sealing with a cover plate. PMMA enables high resolution direct lithographic patterning of the fluidic structures. We apply Deep UV Lithography (DUV) to photochemically degrade PMMA and subsequently dissolve the degraded areas in an organic solvent. This process had previously primarily been utilized to pattern polymer waveguides. For minimum feature size devices, initial samples have been fabricated applying Deep X-Ray Lithography (DXRL) instead of DUV. Final sealing with PMMA cover plates is performed using thermal and UV bonding or solvent welding.
APA, Harvard, Vancouver, ISO, and other styles
2

Aßmus, Elisabeth, Bernhard Weller, and Frank Walter. "Photobioreactor Facade Elements - From Concept to Prototype." In IABSE Conference, Kuala Lumpur 2018: Engineering the Developing World. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/kualalumpur.2018.0875.

Full text
Abstract:
<p>The research project FABIG pursues a comprehensive approach in developing facades with photobioreactors made of glass. The story-high reactor elements generate biomass that can either be processed for the pharmaceutical and food industry or used for the building energy supply. In consequence, the joint project partners Technische Universität Dresden, ADCO Technik GmbH, Arup Deutschland GmbH und SSC GmbH contribute their expertise in facade systems, adhesives, technical building systems and manufacturing.</p><p>This paper introduces microalgae, their industrial applications and different production plants for cultivation. The main section traces the development starting from the constructive concept to the realization of a prime prototype in operation. This development includes composition and function of essential constructive elements and specific load assumptions in a photobioreactor. The researchers gave significant attention to load-bearing adhesives inside the reactor exceeding current state of technology. Previous experimental tests on the adhesive and a study on the inner joint composition are presented. The study considers two joint variations and rates them according to their mechanical behavior, processing and assembly characteristics. Finally, the paper concludes with a future façade concept as flexible modular system.</p>
APA, Harvard, Vancouver, ISO, and other styles
3

Luca-Motoc, Dana, Petru A. Pop, Santiago Ferrandiz Bou, and Nicolae Da˘diˆrlat. "Tailoring Thermal Properties of Hybrid Glass Fibers/Carbon Fibers Reinforced Polymeric Composites." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63055.

Full text
Abstract:
The herein paper tackles the issue of dimensional stability of composite materials from the perspective of characterization the overall linear coefficient of thermal expansion (CTE) for different hybrid polymeric composite architectures tailored with the aim of lowering the manufacturing costs and fulfilling few design requirements in several engineering applications. The hybrid configurations are made of unidirectional carbon fibers (max. 1 or 2) embedded along with different combinations of E-glass woven roving or chopped E-glass strand mat as wear/chemical resistant, outside reinforcement layers. A polyester resin type was used as binder. The thermal properties were measured using a differential dilatometer DIL 402 PC/1 from NETZSCH GmbH (Germany) imposing a linear, monotonic temperature rise with 1 K/min from 20°C up to 250°C. Thermal cycling behavior was underlined by imposing two successive heating cycles upon each hybrid composite samples. Thermal strains temperature/time evolution and peak values are further analyzed to size the thermal aging effects. The experimental retrieved data will be further compared with the values obtained by running a micromechanical based approach simulation on the DIGIMAT software (from X-stream Engineering Inc., Luxembourg).
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Glas GmbH"

1

Brown, Judith Alice, and Kevin Nicholas Long. Modeling the Effect of Glass Microballoon (GMB) Volume Fraction on Behavior of Sylgard/GMB Composites. Office of Scientific and Technical Information (OSTI), May 2017. http://dx.doi.org/10.2172/1367414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Glas GmbH' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography